[SPARC64]: Eliminate NR_CPUS limitations.

Cheetah systems can have cpuids as large as 1023, although physical
systems don't have that many cpus.

Only three limitations existed in the kernel preventing arbitrary
NR_CPUS values:

1) dcache dirty cpu state stored in page->flags on
   D-cache aliasing platforms.  With some build time
   calculations and some build-time BUG checks on
   page->flags layout, this one was easily solved.

2) The cheetah XCALL delivery code could only handle
   a cpumask with up to 32 cpus set.  Some simple looping
   logic clears that up too.

3) thread_info->cpu was a u8, easily changed to a u16.

There are a few spots in the kernel that still put NR_CPUS
sized arrays on the kernel stack, but that's not a sparc64
specific problem.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2007-05-26 01:14:43 -07:00
parent 5cbc307373
commit 22adb358e8
6 changed files with 43 additions and 16 deletions

View file

@ -147,10 +147,10 @@ config SMP
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-64)"
range 2 64
int "Maximum number of CPUs (2-1024)"
range 2 1024
depends on SMP
default "32"
default "64"
source "drivers/cpufreq/Kconfig"

View file

@ -523,7 +523,7 @@ tlb_fixup_done:
#else
mov 0, %o0
#endif
stb %o0, [%g6 + TI_CPU]
sth %o0, [%g6 + TI_CPU]
/* Off we go.... */
call start_kernel

View file

@ -400,7 +400,7 @@ static __inline__ void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, c
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
u64 pstate, ver;
int nack_busy_id, is_jbus;
int nack_busy_id, is_jbus, need_more;
if (cpus_empty(mask))
return;
@ -416,6 +416,7 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas
__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
retry:
need_more = 0;
__asm__ __volatile__("wrpr %0, %1, %%pstate\n\t"
: : "r" (pstate), "i" (PSTATE_IE));
@ -444,6 +445,10 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas
: /* no outputs */
: "r" (target), "i" (ASI_INTR_W));
nack_busy_id++;
if (nack_busy_id == 32) {
need_more = 1;
break;
}
}
}
@ -460,6 +465,16 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas
if (dispatch_stat == 0UL) {
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
if (unlikely(need_more)) {
int i, cnt = 0;
for_each_cpu_mask(i, mask) {
cpu_clear(i, mask);
cnt++;
if (cnt == 32)
break;
}
goto retry;
}
return;
}
if (!--stuck)
@ -497,6 +512,8 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas
if ((dispatch_stat & check_mask) == 0)
cpu_clear(i, mask);
this_busy_nack += 2;
if (this_busy_nack == 64)
break;
}
goto retry;

View file

@ -191,12 +191,9 @@ inline void flush_dcache_page_impl(struct page *page)
}
#define PG_dcache_dirty PG_arch_1
#define PG_dcache_cpu_shift 24UL
#define PG_dcache_cpu_mask (256UL - 1UL)
#if NR_CPUS > 256
#error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus
#endif
#define PG_dcache_cpu_shift 32UL
#define PG_dcache_cpu_mask \
((1UL<<ilog2(roundup_pow_of_two(NR_CPUS)))-1UL)
#define dcache_dirty_cpu(page) \
(((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask)
@ -1349,6 +1346,19 @@ void __init paging_init(void)
unsigned long end_pfn, pages_avail, shift, phys_base;
unsigned long real_end, i;
/* These build time checkes make sure that the dcache_dirty_cpu()
* page->flags usage will work.
*
* When a page gets marked as dcache-dirty, we store the
* cpu number starting at bit 32 in the page->flags. Also,
* functions like clear_dcache_dirty_cpu use the cpu mask
* in 13-bit signed-immediate instruction fields.
*/
BUILD_BUG_ON(FLAGS_RESERVED != 32);
BUILD_BUG_ON(SECTIONS_WIDTH + NODES_WIDTH + ZONES_WIDTH +
ilog2(roundup_pow_of_two(NR_CPUS)) > FLAGS_RESERVED);
BUILD_BUG_ON(NR_CPUS > 4096);
kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;

View file

@ -202,7 +202,7 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
* the calculations done by the macro mid-stream.
*/
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
ldub [THR + TI_CPU], REG1; \
lduh [THR + TI_CPU], REG1; \
sethi %hi(__per_cpu_shift), REG3; \
sethi %hi(__per_cpu_base), REG2; \
ldx [REG3 + %lo(__per_cpu_shift)], REG3; \

View file

@ -38,8 +38,8 @@ struct thread_info {
/* D$ line 1 */
struct task_struct *task;
unsigned long flags;
__u8 cpu;
__u8 fpsaved[7];
__u8 pad;
unsigned long ksp;
/* D$ line 2 */
@ -49,7 +49,7 @@ struct thread_info {
int preempt_count; /* 0 => preemptable, <0 => BUG */
__u8 new_child;
__u8 syscall_noerror;
__u16 __pad;
__u16 cpu;
unsigned long *utraps;
@ -83,8 +83,7 @@ struct thread_info {
#define TI_CURRENT_DS (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
#define TI_FPDEPTH (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
#define TI_WSAVED (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
#define TI_CPU 0x00000010
#define TI_FPSAVED 0x00000011
#define TI_FPSAVED 0x00000010
#define TI_KSP 0x00000018
#define TI_FAULT_ADDR 0x00000020
#define TI_KREGS 0x00000028
@ -92,6 +91,7 @@ struct thread_info {
#define TI_PRE_COUNT 0x00000038
#define TI_NEW_CHILD 0x0000003c
#define TI_SYS_NOERROR 0x0000003d
#define TI_CPU 0x0000003e
#define TI_UTRAPS 0x00000040
#define TI_REG_WINDOW 0x00000048
#define TI_RWIN_SPTRS 0x000003c8