spi/panel: dt-bindings: drop CPHA and CPOL from common properties

The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them.  Drop them from common
spi-peripheral-props.yaml schema, mention in few panel drivers which use
them and include instead in the SPI controller bindings.  The controller
bindings will provide CPHA/CPOL type validation and one place for
description.  Each device schema must list the properties if they are
applicable.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220722191539.90641-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml

@@ -21,6 +21,9 @@ properties:
   enable-gpios: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - enable-gpios

Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml

@@ -42,6 +42,9 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml

@@ -23,6 +23,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/panel/tpo,td.yaml

@@ -28,6 +28,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - port

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -95,6 +95,17 @@ patternProperties:
     type: object
     $ref: spi-peripheral-props.yaml
 
+    properties:
+      spi-cpha:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires shifted clock phase (CPHA) mode.
+
+      spi-cpol:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires inverse clock polarity (CPOL) mode.
+
     required:
       - compatible
       - reg

Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml

@@ -34,16 +34,6 @@ properties:
     description:
       The device requires 3-wire mode.
 
-  spi-cpha:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires shifted clock phase (CPHA) mode.
-
-  spi-cpol:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires inverse clock polarity (CPOL) mode.
-
   spi-cs-high:
     $ref: /schemas/types.yaml#/definitions/flag
     description: