dt-bindings: usb: convert usb-device.txt to YAML schema
Convert usb-device.txt to YAML schema usb-device.yaml Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20201225075258.33352-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Chunfeng Yun
Greg Kroah-Hartman
parent
63d152149b
commit
23bf6fc704
|
|
@ -1,102 +0,0 @@
|
|||
Generic USB Device Properties
|
||||
|
||||
Usually, we only use device tree for hard wired USB device.
|
||||
The reference binding doc is from:
|
||||
http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
|
||||
|
||||
Four types of device-tree nodes are defined: "host-controller nodes"
|
||||
representing USB host controllers, "device nodes" representing USB devices,
|
||||
"interface nodes" representing USB interfaces and "combined nodes"
|
||||
representing simple USB devices.
|
||||
|
||||
A combined node shall be used instead of a device node and an interface node
|
||||
for devices of class 0 or 9 (hub) with a single configuration and a single
|
||||
interface.
|
||||
|
||||
A "hub node" is a combined node or an interface node that represents a USB
|
||||
hub.
|
||||
|
||||
|
||||
Required properties for device nodes:
|
||||
- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
|
||||
The textual representation of VID and PID shall be in lower case hexadecimal
|
||||
with leading zeroes suppressed. The other compatible strings from the above
|
||||
standard binding could also be used, but a device adhering to this binding
|
||||
may leave out all except for "usbVID,PID".
|
||||
- reg: the number of the USB hub port or the USB host-controller port to which
|
||||
this device is attached. The range is 1-255.
|
||||
|
||||
|
||||
Required properties for device nodes with interface nodes:
|
||||
- #address-cells: shall be 2
|
||||
- #size-cells: shall be 0
|
||||
|
||||
|
||||
Required properties for interface nodes:
|
||||
- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
|
||||
the product id, CN is the configuration value and IN is the interface
|
||||
number. The textual representation of VID, PID, CN and IN shall be in lower
|
||||
case hexadecimal with leading zeroes suppressed. The other compatible
|
||||
strings from the above standard binding could also be used, but a device
|
||||
adhering to this binding may leave out all except for
|
||||
"usbifVID,PID.configCN.IN".
|
||||
- reg: the interface number and configuration value
|
||||
|
||||
The configuration component is not included in the textual representation of
|
||||
an interface-node unit address for configuration 1.
|
||||
|
||||
|
||||
Required properties for combined nodes:
|
||||
- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
|
||||
The textual representation of VID and PID shall be in lower case hexadecimal
|
||||
with leading zeroes suppressed. The other compatible strings from the above
|
||||
standard binding could also be used, but a device adhering to this binding
|
||||
may leave out all except for "usbVID,PID".
|
||||
- reg: the number of the USB hub port or the USB host-controller port to which
|
||||
this device is attached. The range is 1-255.
|
||||
|
||||
|
||||
Required properties for hub nodes with device nodes:
|
||||
- #address-cells: shall be 1
|
||||
- #size-cells: shall be 0
|
||||
|
||||
|
||||
Required properties for host-controller nodes with device nodes:
|
||||
- #address-cells: shall be 1
|
||||
- #size-cells: shall be 0
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
&usb1 { /* host controller */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub@1 { /* hub connected to port 1 */
|
||||
compatible = "usb5e3,608";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
device@2 { /* device connected to port 2 */
|
||||
compatible = "usb123,4567";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
device@3 { /* device connected to port 3 */
|
||||
compatible = "usb123,abcd";
|
||||
reg = <3>;
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interface@0 { /* interface 0 of configuration 1 */
|
||||
compatible = "usbif123,abcd.config1.0";
|
||||
reg = <0 1>;
|
||||
};
|
||||
|
||||
interface@0,2 { /* interface 0 of configuration 2 */
|
||||
compatible = "usbif123,abcd.config2.0";
|
||||
reg = <0 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,124 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/usb/usb-device.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: The device tree bindings for the Generic USB Device
|
||||
|
||||
maintainers:
|
||||
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||||
|
||||
description: |
|
||||
Usually, we only use device tree for hard wired USB device.
|
||||
The reference binding doc is from:
|
||||
http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
|
||||
|
||||
Four types of device-tree nodes are defined: "host-controller nodes"
|
||||
representing USB host controllers, "device nodes" representing USB devices,
|
||||
"interface nodes" representing USB interfaces and "combined nodes"
|
||||
representing simple USB devices.
|
||||
|
||||
A combined node shall be used instead of a device node and an interface node
|
||||
for devices of class 0 or 9 (hub) with a single configuration and a single
|
||||
interface.
|
||||
|
||||
A "hub node" is a combined node or an interface node that represents a USB
|
||||
hub.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
|
||||
description: Device nodes or combined nodes.
|
||||
"usbVID,PID", where VID is the vendor id and PID the product id.
|
||||
The textual representation of VID and PID shall be in lower case
|
||||
hexadecimal with leading zeroes suppressed. The other compatible
|
||||
strings from the above standard binding could also be used,
|
||||
but a device adhering to this binding may leave out all except
|
||||
for "usbVID,PID".
|
||||
|
||||
reg:
|
||||
description: the number of the USB hub port or the USB host-controller
|
||||
port to which this device is attached. The range is 1-255.
|
||||
maxItems: 1
|
||||
|
||||
"#address-cells":
|
||||
description: should be 1 for hub nodes with device nodes,
|
||||
should be 2 for device nodes with interface nodes.
|
||||
enum: [1, 2]
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
"^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$":
|
||||
type: object
|
||||
description: USB interface nodes.
|
||||
The configuration component is not included in the textual
|
||||
representation of an interface-node unit address for configuration 1.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$"
|
||||
description: Interface nodes.
|
||||
"usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
|
||||
the product id, CN is the configuration value and IN is the interface
|
||||
number. The textual representation of VID, PID, CN and IN shall be
|
||||
in lower case hexadecimal with leading zeroes suppressed.
|
||||
The other compatible strings from the above standard binding could
|
||||
also be used, but a device adhering to this binding may leave out
|
||||
all except for "usbifVID,PID.configCN.IN".
|
||||
|
||||
reg:
|
||||
description: should be 2 cells long, the first cell represents
|
||||
the interface number and the second cell represents the
|
||||
configuration value.
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatile
|
||||
- reg
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
examples:
|
||||
#hub connected to port 1
|
||||
#device connected to port 2
|
||||
#device connected to port 3
|
||||
# interface 0 of configuration 1
|
||||
# interface 0 of configuration 2
|
||||
- |
|
||||
usb@11270000 {
|
||||
reg = <0x11270000 0x1000>;
|
||||
interrupts = <0x0 0x4e 0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub@1 {
|
||||
compatible = "usb5e3,608";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
device@2 {
|
||||
compatible = "usb123,4567";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
device@3 {
|
||||
compatible = "usb123,abcd";
|
||||
reg = <3>;
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interface@0 {
|
||||
compatible = "usbif123,abcd.config1.0";
|
||||
reg = <0 1>;
|
||||
};
|
||||
|
||||
interface@0,2 {
|
||||
compatible = "usbif123,abcd.config2.0";
|
||||
reg = <0 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -23,6 +23,18 @@ properties:
|
|||
targeted hosts (non-PC hosts).
|
||||
type: boolean
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]{1,2}$":
|
||||
description: The hard wired USB devices
|
||||
type: object
|
||||
$ref: /usb/usb-device.yaml
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
examples:
|
||||
|
|
@ -30,4 +42,11 @@ examples:
|
|||
usb {
|
||||
phys = <&usb2_phy1>, <&usb3_phy1>;
|
||||
phy-names = "usb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub@1 {
|
||||
compatible = "usb5e3,610";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue