OMAP2+: clock: remove the DPLL rate tolerance code

Remove the DPLL rate tolerance code that is called during rate
rounding.  As far as I know, this code is never used, since it's been
more important for callers of the DPLL round_rate()/set_rate()
functions to obtain an exact rate than it is to save a relatively
small amount of power.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
This commit is contained in:
Paul Walmsley 2011-02-16 15:38:39 -07:00
parent e07f469d28
commit 241d3a8dca
6 changed files with 24 additions and 86 deletions

View File

@ -178,12 +178,11 @@ void omap2_init_dpll_parent(struct clk *clk)
if (!dd)
return;
/* Return bypass rate if DPLL is bypassed */
v = __raw_readl(dd->control_reg);
v &= dd->enable_mask;
v >>= __ffs(dd->enable_mask);
/* Reparent in case the dpll is in bypass */
/* Reparent the struct clk in case the dpll is in bypass */
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
@ -259,51 +258,23 @@ u32 omap2_get_dpll_rate(struct clk *clk)
/* DPLL rate rounding code */
/**
* omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
* @clk: struct clk * of the DPLL
* @tolerance: maximum rate error tolerance
*
* Set the maximum DPLL rate error tolerance for the rate rounding
* algorithm. The rate tolerance is an attempt to balance DPLL power
* saving (the least divider value "n") vs. rate fidelity (the least
* difference between the desired DPLL target rate and the rounded
* rate out of the algorithm). So, increasing the tolerance is likely
* to decrease DPLL power consumption and increase DPLL rate error.
* Returns -EINVAL if provided a null clock ptr or a clk that is not a
* DPLL; or 0 upon success.
*/
int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
{
if (!clk || !clk->dpll_data)
return -EINVAL;
clk->dpll_data->rate_tolerance = tolerance;
return 0;
}
/**
* omap2_dpll_round_rate - round a target rate for an OMAP DPLL
* @clk: struct clk * for a DPLL
* @target_rate: desired DPLL clock rate
*
* Given a DPLL, a desired target rate, and a rate tolerance, round
* the target rate to a possible, programmable rate for this DPLL.
* Rate tolerance is assumed to be set by the caller before this
* function is called. Attempts to select the minimum possible n
* within the tolerance to reduce power consumption. Stores the
* computed (m, n) in the DPLL's dpll_data structure so set_rate()
* will not need to call this (expensive) function again. Returns ~0
* if the target rate cannot be rounded, either because the rate is
* too low or because the rate tolerance is set too tightly; or the
* rounded rate upon success.
* Given a DPLL and a desired target rate, round the target rate to a
* possible, programmable rate for this DPLL. Attempts to select the
* minimum possible n. Stores the computed (m, n) in the DPLL's
* dpll_data structure so set_rate() will not need to call this
* (expensive) function again. Returns ~0 if the target rate cannot
* be rounded, or the rounded rate upon success.
*/
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
{
int m, n, r, e, scaled_max_m;
unsigned long scaled_rt_rp, new_rate;
int min_e = -1, min_e_m = -1, min_e_n = -1;
int m, n, r, scaled_max_m;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
struct dpll_data *dd;
if (!clk || !clk->dpll_data)
@ -311,8 +282,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
dd = clk->dpll_data;
pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
"%ld\n", clk->name, target_rate);
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
clk->name, target_rate);
scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
@ -347,39 +318,23 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
if (r == DPLL_MULT_UNDERFLOW)
continue;
e = target_rate - new_rate;
pr_debug("clock: n = %d: m = %d: rate error is %d "
"(new_rate = %ld)\n", n, m, e, new_rate);
pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
clk->name, m, n, new_rate);
if (min_e == -1 ||
min_e >= (int)(abs(e) - dd->rate_tolerance)) {
min_e = e;
min_e_m = m;
min_e_n = n;
pr_debug("clock: found new least error %d\n", min_e);
/* We found good settings -- bail out now */
if (min_e <= dd->rate_tolerance)
break;
if (target_rate == new_rate) {
dd->last_rounded_m = m;
dd->last_rounded_n = n;
dd->last_rounded_rate = target_rate;
break;
}
}
if (min_e < 0) {
pr_debug("clock: error: target rate or tolerance too low\n");
if (target_rate != new_rate) {
pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
target_rate);
return ~0;
}
dd->last_rounded_m = min_e_m;
dd->last_rounded_n = min_e_n;
dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
min_e_m, min_e_n);
pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
min_e, min_e_m, min_e_n);
pr_debug("clock: final rate: %ld (target rate: %ld)\n",
dd->last_rounded_rate, target_rate);
return dd->last_rounded_rate;
return target_rate;
}

View File

@ -18,9 +18,6 @@
#include <plat/clock.h>
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
@ -55,7 +52,6 @@ void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
unsigned long omap3_dpll_recalc(struct clk *clk);
unsigned long omap3_clkoutx2_recalc(struct clk *clk);

View File

@ -116,7 +116,6 @@ static struct dpll_data dpll_dd = {
.max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
/*

View File

@ -116,7 +116,6 @@ static struct dpll_data dpll_dd = {
.max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
/*

View File

@ -291,7 +291,6 @@ static struct dpll_data dpll1_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll1_ck = {
@ -364,7 +363,6 @@ static struct dpll_data dpll2_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll2_ck = {
@ -424,7 +422,6 @@ static struct dpll_data dpll3_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll3_ck = {
@ -583,7 +580,6 @@ static struct dpll_data dpll4_dd_34xx __initdata = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct dpll_data dpll4_dd_3630 __initdata = {
@ -607,7 +603,6 @@ static struct dpll_data dpll4_dd_3630 __initdata = {
.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE,
.flags = DPLL_J_TYPE
};
@ -939,7 +934,6 @@ static struct dpll_data dpll5_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll5_ck = {

View File

@ -109,7 +109,6 @@ struct clksel {
* @clk_ref: struct clk pointer to the clock's reference clock input
* @control_reg: register containing the DPLL mode bitfield
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
* @rate_tolerance: maximum variance allowed from target rate (in Hz)
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
@ -135,12 +134,9 @@ struct clksel {
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
* correct to only have one @clk_bypass pointer.
*
* XXX @rate_tolerance should probably be deprecated - currently there
* don't seem to be any usecases for DPLL rounding that is not exact.
*
* XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
* @last_rounded_n) should be separated from the runtime-fixed fields
* and placed into a differenct structure, so that the runtime-fixed data
* and placed into a different structure, so that the runtime-fixed data
* can be placed into read-only space.
*/
struct dpll_data {
@ -151,7 +147,6 @@ struct dpll_data {
struct clk *clk_ref;
void __iomem *control_reg;
u32 enable_mask;
unsigned int rate_tolerance;
unsigned long last_rounded_rate;
u16 last_rounded_m;
u16 max_multiplier;