mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

dmaengine: imx-sdma: add clock ratio 1:1 check 

On i.mx8 mscale B0 chip, AHB/SDMA clock ratio 2:1 can't be supportted,
since SDMA clock ratio has to be increased to 250Mhz, AHB can't reach
to 500Mhz, so use 1:1 instead.

Based on NXP commit MLK-16841-1 by Robin Gong <yibin.gong@nxp.com>

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Angus Ainslie (Purism) 2019-01-28 09:03:21 -07:00 committed by Vinod Koul
parent 3b6679f91e
commit 25aaa75df1
1 changed files with 14 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/dma/imx-sdma.c
View File

@ -440,6 +440,8 @@ struct sdma_engine {
unsigned int irq;
dma_addr_t bd0_phys;
struct sdma_buffer_descriptor *bd0;
/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
bool clk_ratio;
};
static int sdma_config_write(struct dma_chan *chan,
@ -662,8 +664,11 @@ static int sdma_run_channel0(struct sdma_engine *sdma)
dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
/* Set bits of CONFIG register with dynamic context switching */
if (readl(sdma->regs + SDMA_H_CONFIG) == 0)
writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
reg = readl(sdma->regs + SDMA_H_CONFIG);
if ((reg & SDMA_H_CONFIG_CSM) == 0) {
reg |= SDMA_H_CONFIG_CSM;
writel_relaxed(reg, sdma->regs + SDMA_H_CONFIG);
}
return ret;
}
@ -1839,6 +1844,9 @@ static int sdma_init(struct sdma_engine *sdma)
if (ret)
goto disable_clk_ipg;
if (clk_get_rate(sdma->clk_ahb) == clk_get_rate(sdma->clk_ipg))
sdma->clk_ratio = 1;
/* Be sure SDMA has not started yet */
writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
@ -1879,8 +1887,10 @@ static int sdma_init(struct sdma_engine *sdma)
writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR);
/* Set bits of CONFIG register but with static context switching */
/* FIXME: Check whether to set ACR bit depending on clock ratios */
writel_relaxed(0, sdma->regs + SDMA_H_CONFIG);
if (sdma->clk_ratio)
writel_relaxed(SDMA_H_CONFIG_ACR, sdma->regs + SDMA_H_CONFIG);
else
writel_relaxed(0, sdma->regs + SDMA_H_CONFIG);
writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR);