powerpc/85xx: Add basic P1023RDS board support

The P1023 processor is an e500v2 based SoC that utilizes the DPAA
networking architecture.  This adds basic board support for non-DPAA
functionality (device tree, board file, etc).

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Roy Zang 2011-05-19 20:20:13 -05:00 committed by Kumar Gala
parent 1325a684b5
commit 2602a21231
7 changed files with 892 additions and 9 deletions

View file

@ -0,0 +1,546 @@
/*
* P1023 RDS Device Tree Source
*
* Copyright 2010-2011 Freescale Semiconductor Inc.
*
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,P1023@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
cpu1: PowerPC,P1023@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
soc@ff600000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1023-immr", "simple-bus";
ranges = <0x0 0x0 0xff600000 0x200000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1023-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,p1023-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
spi@7000 {
cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
fsl,espi-num-chipselects = <4>;
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db081d";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
label = "u-boot-spi";
reg = <0x00000000 0x00080000>;
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
label = "dtb-spi";
reg = <0x00080000 0x00080000>;
read-only;
};
};
};
gpio: gpio-controller@f000 {
#gpio-cells = <2>;
compatible = "fsl,qoriq-gpio";
reg = <0xf000 0x100>;
interrupts = <47 0x2>;
interrupt-parent = <&mpic>;
gpio-controller;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p1023-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <28 0x2>;
dr_mode = "host";
phy_type = "ulpi";
};
crypto: crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30000 0x10000>;
ranges = <0 0x30000 0x10000>;
interrupt-parent = <&mpic>;
interrupts = <58 2>;
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <45 2>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <45 2>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <57 2>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <57 2>;
};
rtic@6000 {
compatible = "fsl,sec-v4.2-rtic",
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x80>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x80>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x80>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x500 0x80>;
};
};
};
power@e0070{
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
"fsl,p1022-pmc";
reg = <0xe0070 0x20>;
etsec1_clk: soc-clk@B0{
fsl,pmcdr-mask = <0x00000080>;
};
etsec2_clk: soc-clk@B1{
fsl,pmcdr-mask = <0x00000040>;
};
etsec3_clk: soc-clk@B2{
fsl,pmcdr-mask = <0x00000020>;
};
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,p1023-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,p1023-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
localbus@ff605000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xff605000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xe0000000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
bank-width = <1>;
device-width = <1>;
partition@0 {
label = "ramdisk";
reg = <0x00000000 0x01c00000>;
};
partition@1c00000 {
label = "kernel";
reg = <0x01c00000 0x002e0000>;
};
partiton@1ee0000 {
label = "dtb";
reg = <0x01ee0000 0x00020000>;
};
partition@1f00000 {
label = "firmware";
reg = <0x01f00000 0x00080000>;
read-only;
};
partition@1f80000 {
label = "u-boot";
reg = <0x01f80000 0x00080000>;
read-only;
};
};
fpga@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1023rds-fpga";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr@20 {
compatible = "fsl,p1023rds-bcsr";
reg = <0x20 0x20>;
};
};
};
pci0: pcie@ff60a000 {
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
cell-index = <1>;
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xff60a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ff609000 {
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
cell-index = <2>;
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xff609000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ff60b000 {
cell-index = <3>;
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xff60b000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 8 1
0000 0 0 2 &mpic 9 1
0000 0 0 3 &mpic 10 1
0000 0 0 4 &mpic 11 1
>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};

View file

@ -0,0 +1,173 @@
CONFIG_PPC_85xx=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P1023_RDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_SWIOTLB=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCI_MSI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_LOGGING=y
CONFIG_ATA=y
CONFIG_SATA_FSL=y
CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_E1000E=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_QE=m
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_FRAME_WARN=8092
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

View file

@ -5,6 +5,7 @@ CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -26,6 +27,7 @@ CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y
@ -44,7 +46,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_SPARSE_IRQ=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
@ -65,8 +66,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
@ -170,7 +169,6 @@ CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
@ -205,7 +203,6 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m

View file

@ -7,6 +7,7 @@ CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -28,6 +29,7 @@ CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y
@ -46,7 +48,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_SPARSE_IRQ=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
@ -67,8 +68,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
@ -172,7 +171,6 @@ CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y

View file

@ -75,6 +75,12 @@ config P1022_DS
help
This option enables support for the Freescale P1022DS reference board.
config P1023_RDS
bool "Freescale P1023 RDS"
select DEFAULT_UIMAGE
help
This option enables support for the P1023 RDS board
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE

View file

@ -11,6 +11,7 @@ obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o

View file

@ -0,0 +1,162 @@
/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Description:
* P1023 RDS Board Setup
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
/* ************************************************************************
*
* Setup the architecture
*
*/
#ifdef CONFIG_SMP
void __init mpc85xx_smp_init(void);
#endif
static void __init mpc85xx_rds_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("p1023_rds_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != NULL) {
static u8 __iomem *bcsr_regs;
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
if (!bcsr_regs) {
printk(KERN_ERR
"BCSR: Failed to map bcsr register space\n");
return;
} else {
#define BCSR15_I2C_BUS0_SEG_CLR 0x07
#define BCSR15_I2C_BUS0_SEG2 0x02
/*
* Note: Accessing exclusively i2c devices.
*
* The i2c controller selects initially ID EEPROM in the u-boot;
* but if menu configuration selects RTC support in the kernel,
* the i2c controller switches to select RTC chip in the kernel.
*/
#ifdef CONFIG_RTC_CLASS
/* Enable RTC chip on the segment #2 of i2c */
clrbits8(&bcsr_regs[15], BCSR15_I2C_BUS0_SEG_CLR);
setbits8(&bcsr_regs[15], BCSR15_I2C_BUS0_SEG2);
#endif
iounmap(bcsr_regs);
}
}
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,p1023-pcie")
fsl_add_bridge(np, 0);
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
}
static struct of_device_id p1023_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
{},
};
static int __init p1023_publish_devices(void)
{
of_platform_bus_probe(NULL, p1023_ids, NULL);
return 0;
}
machine_device_initcall(p1023_rds, p1023_publish_devices);
static void __init mpc85xx_rds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
struct device_node *np = NULL;
np = of_find_node_by_type(NULL, "open-pic");
if (!np) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Failed to map mpic register space\n");
of_node_put(np);
return;
}
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic_init(mpic);
}
static int __init p1023_rds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
}
define_machine(p1023_rds) {
.name = "P1023 RDS",
.probe = p1023_rds_probe,
.setup_arch = mpc85xx_rds_setup_arch,
.init_IRQ = mpc85xx_rds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};