ARM: SoC fixes

We haven't seen a whole lot of fixes for the first two weeks since the merge
 window, but here is the batch that we have at the moment.
 
 Nothing sticks out as particularly bad or scary, it's mostly a handful of
 smaller fixes to several platforms. The Uniphier reset controller changes
 could probably have been delayed to 4.10, but they're not scary and just
 plumbing up driver changes that went in during the merge window.
 
 We're also adding another maintainer to Marvell Berlin platforms, to help
 out when Sebastian is too busy. Yay teamwork!
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYFPA2AAoJEIwa5zzehBx3dlgP/jh5sFyP0siTIKDvHInadQUg
 BXYPtMHQ0t7JZrFbwcNbMDYWiI/W5xtgvbBW3FVMRuwYVbHQnNTYSmg/z458yEPC
 E74Q4ykwvLy8KN3uZXnne7NUjccBcYKnrXNP1IiTsgXYx19iz2j/jXa5O6Js9wHi
 iYsWfPUDhWFautMcN6zxaqlXeC0EuzvqI94bPJzZJE6ZjYbuTUDDk1kopeutJsBa
 DEryAERFiPAXt0YggjLFvFlhoWjUjCMu0S9ilJovx7f3SC93NuLzDdCGOC2tH4oS
 wDPWIMvMdEHnUXF5VYLmzkXovLMloPKTDXYHh5fo8QXQ56RIkjGPgTX4KIm86vJS
 QdZhSE+NY5tYNGr+ErmOWwNail/A4hxT8HWswSrF07ZcN7FOScPGAV+dTfl+/Am/
 RZd6nfSW5X8Yvtr19BZ9TK5HowoDsF+ynQNIlg/fTu+v+KtHGZWVmmSVZrWzJPmf
 6czsfQUDjOVEwg0wcDbHpy3BO69iEFn/45OVDKmrXz1juTehOBviYJ+6L5TsD/n7
 hFVUuCCqBsgIeSIu0xpqoTHrFPK1wd8FoTkUwRBAvOja7D6BmoartvsUvMVeXbLm
 c/2vdoutR6ZDuzoyL3za0FRnngC42AXM+WoPrqSJnqrfX2I8TH0uE6F5gxruxVC9
 ggrXTlCtC6KlC9DhRXh2
 =OGbj
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC
This commit is contained in:
Linus Torvalds 2016-10-29 12:07:29 -07:00
commit 2674235fd4
21 changed files with 88 additions and 68 deletions

View File

@ -6,25 +6,25 @@ System reset
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
"socionext,uniphier-ld4-reset" - for PH1-LD4 SoC.
"socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
"socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
"socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
"socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
"socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
"socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
"socionext,uniphier-sld3-reset" - for sLD3 SoC.
"socionext,uniphier-ld4-reset" - for LD4 SoC.
"socionext,uniphier-pro4-reset" - for Pro4 SoC.
"socionext,uniphier-sld8-reset" - for sLD8 SoC.
"socionext,uniphier-pro5-reset" - for Pro5 SoC.
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-reset" - for LD11 SoC.
"socionext,uniphier-ld20-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
sysctrl@61840000 {
compatible = "socionext,uniphier-ld20-sysctrl",
compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
reset {
compatible = "socionext,uniphier-ld20-reset";
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
@ -32,30 +32,30 @@ Example:
};
Media I/O (MIO) reset
---------------------
Media I/O (MIO) reset, SD reset
-------------------------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
"socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC.
"socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
"socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
"socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
"socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
"socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
"socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
"socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
"socionext,uniphier-ld4-mio-reset" - for LD4 SoC.
"socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
"socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
"socionext,uniphier-pro5-sd-reset" - for Pro5 SoC.
"socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
mioctrl@59810000 {
compatible = "socionext,uniphier-ld20-mioctrl",
compatible = "socionext,uniphier-ld11-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
reset {
compatible = "socionext,uniphier-ld20-mio-reset";
compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
};
@ -68,24 +68,24 @@ Peripheral reset
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC.
"socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
"socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
"socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
"socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
"socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
"socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
"socionext,uniphier-ld4-peri-reset" - for LD4 SoC.
"socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
"socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
"socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
perictrl@59820000 {
compatible = "socionext,uniphier-ld20-perictrl",
compatible = "socionext,uniphier-ld11-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
reset {
compatible = "socionext,uniphier-ld20-peri-reset";
compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};

View File

@ -1442,6 +1442,7 @@ F: drivers/cpufreq/mvebu-cpufreq.c
F: arch/arm/configs/mvebu_*_defconfig
ARM/Marvell Berlin SoC support
M: Jisheng Zhang <jszhang@marvell.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained

View File

@ -239,14 +239,25 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
/* All direction control is used */
st,sig-dir-cmd;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-dat31;
st,sig-pin-fbclk;
full-pwr-cycle;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi0_default_mode>;
pinctrl-1 = <&sdi0_sleep_mode>;
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
/* GPIO218 MMC_CD */
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -549,7 +560,7 @@
/* VMMCI level-shifter enable */
snowball_cfg3 {
pins = "GPIO217_AH12";
ste,config = <&gpio_out_lo>;
ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
snowball_cfg4 {

View File

@ -184,11 +184,11 @@
};
&mio_clk {
compatible = "socionext,uniphier-pro5-mio-clock";
compatible = "socionext,uniphier-pro5-sd-clock";
};
&mio_rst {
compatible = "socionext,uniphier-pro5-mio-reset";
compatible = "socionext,uniphier-pro5-sd-reset";
};
&peri_clk {

View File

@ -197,11 +197,11 @@
};
&mio_clk {
compatible = "socionext,uniphier-pxs2-mio-clock";
compatible = "socionext,uniphier-pxs2-sd-clock";
};
&mio_rst {
compatible = "socionext,uniphier-pxs2-mio-reset";
compatible = "socionext,uniphier-pxs2-sd-reset";
};
&peri_clk {

View File

@ -70,7 +70,7 @@
global_timer: timer@40002200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&intc>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};

View File

@ -850,6 +850,7 @@ CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_E1000E=y
CONFIG_PWM_STI=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BRCMSTB=m

View File

@ -408,7 +408,7 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
{
struct clk *clk;
int i;
int i, ret;
imx6q_pu_domain.reg = pu_reg;
@ -430,13 +430,22 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
return 0;
pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
return of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
pm_genpd_init(imx_gpc_domains[i], NULL, false);
ret = of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
if (ret)
goto power_off;
return 0;
power_off:
imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
clk_err:
while (i--)
clk_put(imx6q_pu_domain.clk[i]);
imx6q_pu_domain.reg = NULL;
return -EINVAL;
}

View File

@ -173,7 +173,7 @@ static void __init imx6q_enet_phy_init(void)
ksz9021rn_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
ksz9031rn_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
ar8031_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
ar8035_phy_fixup);

View File

@ -23,6 +23,7 @@ config MACH_MVEBU_V7
select CACHE_L2X0
select ARM_CPU_SUSPEND
select MACH_MVEBU_ANY
select MVEBU_CLK_COREDIV
config MACH_ARMADA_370
bool "Marvell Armada 370 boards"
@ -32,7 +33,6 @@ config MACH_ARMADA_370
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_370
select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 370 SoC with device tree.
@ -50,7 +50,6 @@ config MACH_ARMADA_375
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 375 SoC with device tree.
@ -68,7 +67,6 @@ config MACH_ARMADA_38X
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.

View File

@ -1,6 +1,7 @@
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_GLOBAL_TIMER
select ARM_GIC

View File

@ -190,6 +190,7 @@ config ARCH_THUNDER
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
help
This enables support for Socionext UniPhier SoC family.

View File

@ -164,6 +164,8 @@
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
nand-bus-width = <16>;
brcm,nand-oob-sector-size = <16>;
#address-cells = <1>;
#size-cells = <1>;
};

View File

@ -123,6 +123,7 @@
<1 14 0xf08>, /* Physical Non-Secure PPI */
<1 11 0xf08>, /* Virtual PPI */
<1 10 0xf08>; /* Hypervisor PPI */
fsl,erratum-a008585;
};
pmu {

View File

@ -195,6 +195,7 @@
<1 14 4>, /* Physical Non-Secure PPI, active-low */
<1 11 4>, /* Virtual PPI, active-low */
<1 10 4>; /* Hypervisor PPI, active-low */
fsl,erratum-a008585;
};
pmu {

View File

@ -131,7 +131,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
clocks = <&cpm_syscon0 0 3>;
clocks = <&cpm_syscon0 1 21>;
status = "disabled";
};

View File

@ -116,7 +116,6 @@
cap-mmc-highspeed;
clock-frequency = <150000000>;
disable-wp;
keep-power-in-suspend;
non-removable;
num-slots = <1>;
vmmc-supply = <&vcc_io>;
@ -258,8 +257,6 @@
};
vcc_sd: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_sd";
};

View File

@ -152,8 +152,6 @@
gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_io>;
};
@ -201,7 +199,6 @@
bus-width = <8>;
cap-mmc-highspeed;
disable-wp;
keep-power-in-suspend;
mmc-pwrseq = <&emmc_pwrseq>;
mmc-hs200-1_2v;
mmc-hs200-1_8v;
@ -350,7 +347,6 @@
clock-freq-min-max = <400000 50000000>;
cap-sd-highspeed;
card-detect-delay = <200>;
keep-power-in-suspend;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;

View File

@ -257,18 +257,18 @@
reg = <0x59801000 0x400>;
};
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
sdctrl@59810000 {
compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
mio_clk: clock {
compatible = "socionext,uniphier-ld20-mio-clock";
sd_clk: clock {
compatible = "socionext,uniphier-ld20-sd-clock";
#clock-cells = <1>;
};
mio_rst: reset {
compatible = "socionext,uniphier-ld20-mio-reset";
sd_rst: reset {
compatible = "socionext,uniphier-ld20-sd-reset";
#reset-cells = <1>;
};
};

View File

@ -111,6 +111,7 @@ config OMAP_OCP2SCP
config QCOM_EBI2
bool "Qualcomm External Bus Interface 2 (EBI2)"
depends on HAS_IOMEM
depends on ARCH_QCOM || COMPILE_TEST
help
Say y here to enable support for the Qualcomm External Bus
Interface 2, which can be used to connect things like NAND Flash,

View File

@ -154,7 +154,7 @@ const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = {
const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
@ -360,7 +360,7 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-reset",
.data = uniphier_ld20_sys_reset_data,
},
/* Media I/O reset */
/* Media I/O reset, SD reset */
{
.compatible = "socionext,uniphier-sld3-mio-reset",
.data = uniphier_sld3_mio_reset_data,
@ -378,20 +378,20 @@ static const struct of_device_id uniphier_reset_match[] = {
.data = uniphier_sld3_mio_reset_data,
},
{
.compatible = "socionext,uniphier-pro5-mio-reset",
.data = uniphier_pro5_mio_reset_data,
.compatible = "socionext,uniphier-pro5-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
{
.compatible = "socionext,uniphier-pxs2-mio-reset",
.data = uniphier_pro5_mio_reset_data,
.compatible = "socionext,uniphier-pxs2-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
{
.compatible = "socionext,uniphier-ld11-mio-reset",
.data = uniphier_sld3_mio_reset_data,
},
{
.compatible = "socionext,uniphier-ld20-mio-reset",
.data = uniphier_pro5_mio_reset_data,
.compatible = "socionext,uniphier-ld20-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
/* Peripheral reset */
{