hwmon: (lm63) Consider LM64 temperature offset

LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
This commit is contained in:
Dirk Eibach 2011-02-09 04:51:34 -05:00 committed by Guenter Roeck
parent 100b33c8bd
commit 2778fb13ba

View file

@ -98,6 +98,9 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
* value, it uses signed 8-bit values with LSB = 1 degree Celsius.
* For remote temperature, low and high limits, it uses signed 11-bit values
* with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
* For LM64 the actual remote diode temperature is 16 degree Celsius higher
* than the register reading. Remote temperature setpoints have to be
* adapted accordingly.
*/
#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \
@ -165,6 +168,8 @@ struct lm63_data {
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int kind;
int temp2_offset;
/* registers values */
u8 config, config_fan;
@ -247,16 +252,34 @@ static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dum
return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
}
static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
char *buf)
/*
* There are 8bit registers for both local(temp1) and remote(temp2) sensor.
* For remote sensor registers temp2_offset has to be considered,
* for local sensor it must not.
* So we need separate 8bit accessors for local and remote sensor.
*/
static ssize_t show_local_temp8(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index]));
}
static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy,
const char *buf, size_t count)
static ssize_t show_remote_temp8(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])
+ data->temp2_offset);
}
static ssize_t set_local_temp8(struct device *dev,
struct device_attribute *dummy,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
@ -274,7 +297,8 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index]));
return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])
+ data->temp2_offset);
}
static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
@ -294,7 +318,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
int nr = attr->index;
mutex_lock(&data->update_lock);
data->temp11[nr] = TEMP11_TO_REG(val);
data->temp11[nr] = TEMP11_TO_REG(val - data->temp2_offset);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
data->temp11[nr] >> 8);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
@ -310,6 +334,7 @@ static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute
{
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2])
+ data->temp2_offset
- TEMP8_FROM_REG(data->temp2_crit_hyst));
}
@ -324,7 +349,7 @@ static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *
long hyst;
mutex_lock(&data->update_lock);
hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
hyst = TEMP8_FROM_REG(data->temp8[2]) + data->temp2_offset - val;
i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
HYST_TO_REG(hyst));
mutex_unlock(&data->update_lock);
@ -355,16 +380,21 @@ static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
set_temp8, 1);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8,
set_local_temp8, 1);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
set_temp11, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
set_temp11, 2);
static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2);
/*
* On LM63, temp2_crit can be set only once, which should be job
* of the bootloader.
*/
static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_remote_temp8,
NULL, 2);
static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
set_temp2_crit_hyst);
@ -479,7 +509,12 @@ static int lm63_probe(struct i2c_client *new_client,
data->valid = 0;
mutex_init(&data->update_lock);
/* Initialize the LM63 chip */
/* Set the device type */
data->kind = id->driver_data;
if (data->kind == lm64)
data->temp2_offset = 16000;
/* Initialize chip */
lm63_init_client(new_client);
/* Register sysfs hooks */