mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
net: phy: dp83867: Add TI dp83867 phy
Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
f6b59f36b4
commit
2a10154abc
5 changed files with 309 additions and 1 deletions
19
Documentation/devicetree/bindings/net/ti,dp83867.txt
Normal file
19
Documentation/devicetree/bindings/net/ti,dp83867.txt
Normal file
|
@ -0,0 +1,19 @@
|
|||
* Texas Instruments - dp83867 Giga bit ethernet phy
|
||||
|
||||
Required properties:
|
||||
- reg - The ID number for the phy, usually a small integer
|
||||
- ti,rx_int_delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
|
||||
for applicable values
|
||||
- ti,tx_int_delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
|
||||
for applicable values
|
||||
- ti,fifo_depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
|
||||
for applicable values
|
||||
|
||||
Example:
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
ti,rx_int_delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx_int_delay = <DP83867_RGMIIDCTL_2_75_NS>;
|
||||
ti,fifo_depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
};
|
|
@ -112,6 +112,11 @@ config MICREL_PHY
|
|||
---help---
|
||||
Supports the KSZ9021, VSC8201, KS8001 PHYs.
|
||||
|
||||
config DP83867_PHY
|
||||
tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
|
||||
---help---
|
||||
Currently supports the DP83867 PHY.
|
||||
|
||||
config FIXED_PHY
|
||||
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
||||
depends on PHYLIB
|
||||
|
@ -205,7 +210,6 @@ config MDIO_BCM_UNIMAC
|
|||
This hardware can be found in the Broadcom GENET Ethernet MAC
|
||||
controllers as well as some Broadcom Ethernet switches such as the
|
||||
Starfighter 2 switches.
|
||||
|
||||
endif # PHYLIB
|
||||
|
||||
config MICREL_KS8995MA
|
||||
|
|
|
@ -22,6 +22,7 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
|||
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
||||
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
||||
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
||||
obj-$(CONFIG_DP83867_PHY) += dp83867.o
|
||||
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
||||
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
||||
|
|
239
drivers/net/phy/dp83867.c
Normal file
239
drivers/net/phy/dp83867.c
Normal file
|
@ -0,0 +1,239 @@
|
|||
/*
|
||||
* Driver for the Texas Instruments DP83867 PHY
|
||||
*
|
||||
* Copyright (C) 2015 Texas Instruments Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/ethtool.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mii.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/phy.h>
|
||||
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
|
||||
#define DP83867_PHY_ID 0x2000a231
|
||||
#define DP83867_DEVADDR 0x1f
|
||||
|
||||
#define MII_DP83867_PHYCTRL 0x10
|
||||
#define MII_DP83867_MICR 0x12
|
||||
#define MII_DP83867_ISR 0x13
|
||||
#define DP83867_CTRL 0x1f
|
||||
|
||||
/* Extended Registers */
|
||||
#define DP83867_RGMIICTL 0x0032
|
||||
#define DP83867_RGMIIDCTL 0x0086
|
||||
|
||||
#define DP83867_SW_RESET BIT(15)
|
||||
#define DP83867_SW_RESTART BIT(14)
|
||||
|
||||
/* MICR Interrupt bits */
|
||||
#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
|
||||
#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
|
||||
#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
|
||||
#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
|
||||
#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
|
||||
#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
|
||||
#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
|
||||
#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
|
||||
#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
|
||||
#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
|
||||
#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
|
||||
#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)
|
||||
|
||||
/* RGMIICTL bits */
|
||||
#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
|
||||
#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)
|
||||
|
||||
/* PHY CTRL bits */
|
||||
#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
|
||||
|
||||
/* RGMIIDCTL bits */
|
||||
#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
|
||||
|
||||
struct dp83867_private {
|
||||
int rx_id_delay;
|
||||
int tx_id_delay;
|
||||
int fifo_depth;
|
||||
};
|
||||
|
||||
static int dp83867_ack_interrupt(struct phy_device *phydev)
|
||||
{
|
||||
int err = phy_read(phydev, MII_DP83867_ISR);
|
||||
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dp83867_config_intr(struct phy_device *phydev)
|
||||
{
|
||||
int micr_status;
|
||||
|
||||
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
||||
micr_status = phy_read(phydev, MII_DP83867_MICR);
|
||||
if (micr_status < 0)
|
||||
return micr_status;
|
||||
|
||||
micr_status |=
|
||||
(MII_DP83867_MICR_AN_ERR_INT_EN |
|
||||
MII_DP83867_MICR_SPEED_CHNG_INT_EN |
|
||||
MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
|
||||
MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);
|
||||
|
||||
return phy_write(phydev, MII_DP83867_MICR, micr_status);
|
||||
}
|
||||
|
||||
micr_status = 0x0;
|
||||
return phy_write(phydev, MII_DP83867_MICR, micr_status);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF_MDIO
|
||||
static int dp83867_of_init(struct phy_device *phydev)
|
||||
{
|
||||
struct dp83867_private *dp83867 = phydev->priv;
|
||||
struct device *dev = &phydev->dev;
|
||||
struct device_node *of_node = dev->of_node;
|
||||
int ret;
|
||||
|
||||
if (!of_node && dev->parent->of_node)
|
||||
of_node = dev->parent->of_node;
|
||||
|
||||
if (!phydev->dev.of_node)
|
||||
return -ENODEV;
|
||||
|
||||
ret = of_property_read_u32(of_node, "ti,rx_int_delay",
|
||||
&dp83867->rx_id_delay);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = of_property_read_u32(of_node, "ti,tx_int_delay",
|
||||
&dp83867->tx_id_delay);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = of_property_read_u32(of_node, "ti,fifo_depth",
|
||||
&dp83867->fifo_depth);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static int dp83867_of_init(struct phy_device *phydev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_OF_MDIO */
|
||||
|
||||
static int dp83867_config_init(struct phy_device *phydev)
|
||||
{
|
||||
struct dp83867_private *dp83867;
|
||||
int ret;
|
||||
u16 val, delay;
|
||||
|
||||
if (!phydev->priv) {
|
||||
dp83867 = devm_kzalloc(&phydev->dev, sizeof(*dp83867),
|
||||
GFP_KERNEL);
|
||||
if (!dp83867)
|
||||
return -ENOMEM;
|
||||
|
||||
phydev->priv = dp83867;
|
||||
ret = dp83867_of_init(phydev);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
dp83867 = (struct dp83867_private *)phydev->priv;
|
||||
}
|
||||
|
||||
if (phy_interface_is_rgmii(phydev)) {
|
||||
ret = phy_write(phydev, MII_DP83867_PHYCTRL,
|
||||
(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) ||
|
||||
(phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
|
||||
val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
|
||||
DP83867_DEVADDR, phydev->addr);
|
||||
|
||||
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
||||
val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
|
||||
|
||||
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
||||
val |= DP83867_RGMII_TX_CLK_DELAY_EN;
|
||||
|
||||
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
||||
val |= DP83867_RGMII_RX_CLK_DELAY_EN;
|
||||
|
||||
phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
|
||||
DP83867_DEVADDR, phydev->addr, val);
|
||||
|
||||
delay = (dp83867->rx_id_delay |
|
||||
(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
|
||||
|
||||
phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
|
||||
DP83867_DEVADDR, phydev->addr, delay);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dp83867_phy_reset(struct phy_device *phydev)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return dp83867_config_init(phydev);
|
||||
}
|
||||
|
||||
static struct phy_driver dp83867_driver[] = {
|
||||
{
|
||||
.phy_id = DP83867_PHY_ID,
|
||||
.phy_id_mask = 0xfffffff0,
|
||||
.name = "TI DP83867",
|
||||
.features = PHY_GBIT_FEATURES,
|
||||
.flags = PHY_HAS_INTERRUPT,
|
||||
|
||||
.config_init = dp83867_config_init,
|
||||
.soft_reset = dp83867_phy_reset,
|
||||
|
||||
/* IRQ related */
|
||||
.ack_interrupt = dp83867_ack_interrupt,
|
||||
.config_intr = dp83867_config_intr,
|
||||
|
||||
.config_aneg = genphy_config_aneg,
|
||||
.read_status = genphy_read_status,
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
|
||||
.driver = {.owner = THIS_MODULE,}
|
||||
},
|
||||
};
|
||||
module_phy_driver(dp83867_driver);
|
||||
|
||||
static struct mdio_device_id __maybe_unused dp83867_tbl[] = {
|
||||
{ DP83867_PHY_ID, 0xfffffff0 },
|
||||
{ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
|
||||
|
||||
MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
|
||||
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
|
||||
MODULE_LICENSE("GPL");
|
45
include/dt-bindings/net/ti-dp83867.h
Normal file
45
include/dt-bindings/net/ti-dp83867.h
Normal file
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* Device Tree constants for the Texas Instruments DP83867 PHY
|
||||
*
|
||||
* Author: Dan Murphy <dmurphy@ti.com>
|
||||
*
|
||||
* Copyright: (C) 2015 Texas Instruments, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_TI_DP83867_H
|
||||
#define _DT_BINDINGS_TI_DP83867_H
|
||||
|
||||
/* PHY CTRL bits */
|
||||
#define DP83867_PHYCR_FIFO_DEPTH_3_B_NIB 0x00
|
||||
#define DP83867_PHYCR_FIFO_DEPTH_4_B_NIB 0x01
|
||||
#define DP83867_PHYCR_FIFO_DEPTH_6_B_NIB 0x02
|
||||
#define DP83867_PHYCR_FIFO_DEPTH_8_B_NIB 0x03
|
||||
|
||||
/* RGMIIDCTL internal delay for rx and tx */
|
||||
#define DP83867_RGMIIDCTL_250_PS 0x0
|
||||
#define DP83867_RGMIIDCTL_500_PS 0x1
|
||||
#define DP83867_RGMIIDCTL_750_PS 0x2
|
||||
#define DP83867_RGMIIDCTL_1_NS 0x3
|
||||
#define DP83867_RGMIIDCTL_1_25_NS 0x4
|
||||
#define DP83867_RGMIIDCTL_1_50_NS 0x5
|
||||
#define DP83867_RGMIIDCTL_1_75_NS 0x6
|
||||
#define DP83867_RGMIIDCTL_2_00_NS 0x7
|
||||
#define DP83867_RGMIIDCTL_2_25_NS 0x8
|
||||
#define DP83867_RGMIIDCTL_2_50_NS 0x9
|
||||
#define DP83867_RGMIIDCTL_2_75_NS 0xa
|
||||
#define DP83867_RGMIIDCTL_3_00_NS 0xb
|
||||
#define DP83867_RGMIIDCTL_3_25_NS 0xc
|
||||
#define DP83867_RGMIIDCTL_3_50_NS 0xd
|
||||
#define DP83867_RGMIIDCTL_3_75_NS 0xe
|
||||
#define DP83867_RGMIIDCTL_4_00_NS 0xf
|
||||
|
||||
#endif
|
Loading…
Reference in a new issue