mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 10:57:46 +00:00
Add htu21 meas-spec driver support
Support for HTU21 temperature & humidity sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
53bf4d067d
commit
2b5c53d2c9
4 changed files with 248 additions and 0 deletions
|
@ -1481,3 +1481,13 @@ Contact: linux-iio@vger.kernel.org
|
|||
Description:
|
||||
Raw (unscaled no offset etc.) resistance reading that can be processed
|
||||
into an ohm value.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/heater_enable
|
||||
KernelVersion: 4.1.0
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
'1' (enable) or '0' (disable) specifying the enable
|
||||
of heater function. Same reading values apply
|
||||
This ABI is especially applicable for humidity sensors
|
||||
to heatup the device and get rid of any condensation
|
||||
in some humidity environment
|
||||
|
|
|
@ -22,6 +22,17 @@ config HDC100X
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called hdc100x.
|
||||
|
||||
config HTU21
|
||||
tristate "Measurement Specialties HTU21 humidity & temperature sensor"
|
||||
depends on I2C
|
||||
select IIO_MS_SENSORS_I2C
|
||||
help
|
||||
If you say yes here you get support for the Measurement Specialties
|
||||
HTU21 humidity and temperature sensor.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called htu21.
|
||||
|
||||
config SI7005
|
||||
tristate "SI7005 relative humidity and temperature sensor"
|
||||
depends on I2C
|
||||
|
|
|
@ -4,5 +4,6 @@
|
|||
|
||||
obj-$(CONFIG_DHT11) += dht11.o
|
||||
obj-$(CONFIG_HDC100X) += hdc100x.o
|
||||
obj-$(CONFIG_HTU21) += htu21.o
|
||||
obj-$(CONFIG_SI7005) += si7005.o
|
||||
obj-$(CONFIG_SI7020) += si7020.o
|
||||
|
|
226
drivers/iio/humidity/htu21.c
Normal file
226
drivers/iio/humidity/htu21.c
Normal file
|
@ -0,0 +1,226 @@
|
|||
/*
|
||||
* htu21.c - Support for Measurement-Specialties
|
||||
* htu21 temperature & humidity sensor
|
||||
*
|
||||
* Copyright (c) 2014 Measurement-Specialties
|
||||
*
|
||||
* Licensed under the GPL-2.
|
||||
*
|
||||
* (7-bit I2C slave address 0x40)
|
||||
*
|
||||
* Datasheet:
|
||||
* http://www.meas-spec.com/downloads/HTU21D.pdf
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/stat.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
#include "../common/ms_sensors/ms_sensors_i2c.h"
|
||||
|
||||
#define HTU21_RESET 0xFE
|
||||
|
||||
static const int htu21_samp_freq[4] = { 20, 40, 70, 120 };
|
||||
/* String copy of the above const for readability purpose */
|
||||
static const char htu21_show_samp_freq[] = "20 40 70 120";
|
||||
|
||||
static int htu21_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *channel, int *val,
|
||||
int *val2, long mask)
|
||||
{
|
||||
int ret, temperature;
|
||||
unsigned int humidity;
|
||||
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_PROCESSED:
|
||||
switch (channel->type) {
|
||||
case IIO_TEMP: /* in milli °C */
|
||||
ret = ms_sensors_ht_read_temperature(dev_data,
|
||||
&temperature);
|
||||
if (ret)
|
||||
return ret;
|
||||
*val = temperature;
|
||||
|
||||
return IIO_VAL_INT;
|
||||
case IIO_HUMIDITYRELATIVE: /* in milli %RH */
|
||||
ret = ms_sensors_ht_read_humidity(dev_data,
|
||||
&humidity);
|
||||
if (ret)
|
||||
return ret;
|
||||
*val = humidity;
|
||||
|
||||
return IIO_VAL_INT;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
*val = htu21_samp_freq[dev_data->res_index];
|
||||
|
||||
return IIO_VAL_INT;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static int htu21_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
||||
int i, ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
i = ARRAY_SIZE(htu21_samp_freq);
|
||||
while (i-- > 0)
|
||||
if (val == htu21_samp_freq[i])
|
||||
break;
|
||||
if (i < 0)
|
||||
return -EINVAL;
|
||||
mutex_lock(&dev_data->lock);
|
||||
dev_data->res_index = i;
|
||||
ret = ms_sensors_write_resolution(dev_data, i);
|
||||
mutex_unlock(&dev_data->lock);
|
||||
|
||||
return ret;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec htu21_channels[] = {
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
||||
},
|
||||
{
|
||||
.type = IIO_HUMIDITYRELATIVE,
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
||||
}
|
||||
};
|
||||
|
||||
static ssize_t htu21_show_battery_low(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
||||
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
||||
|
||||
return ms_sensors_show_battery_low(dev_data, buf);
|
||||
}
|
||||
|
||||
static ssize_t htu21_show_heater(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
||||
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
||||
|
||||
return ms_sensors_show_heater(dev_data, buf);
|
||||
}
|
||||
|
||||
static ssize_t htu21_write_heater(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t len)
|
||||
{
|
||||
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
||||
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
||||
|
||||
return ms_sensors_write_heater(dev_data, buf, len);
|
||||
}
|
||||
|
||||
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(htu21_show_samp_freq);
|
||||
static IIO_DEVICE_ATTR(battery_low, S_IRUGO,
|
||||
htu21_show_battery_low, NULL, 0);
|
||||
static IIO_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR,
|
||||
htu21_show_heater, htu21_write_heater, 0);
|
||||
|
||||
static struct attribute *htu21_attributes[] = {
|
||||
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
||||
&iio_dev_attr_battery_low.dev_attr.attr,
|
||||
&iio_dev_attr_heater_enable.dev_attr.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group htu21_attribute_group = {
|
||||
.attrs = htu21_attributes,
|
||||
};
|
||||
|
||||
static const struct iio_info htu21_info = {
|
||||
.read_raw = htu21_read_raw,
|
||||
.write_raw = htu21_write_raw,
|
||||
.attrs = &htu21_attribute_group,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int htu21_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct ms_ht_dev *dev_data;
|
||||
struct iio_dev *indio_dev;
|
||||
int ret;
|
||||
u64 serial_number;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
|
||||
I2C_FUNC_SMBUS_WRITE_BYTE |
|
||||
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
|
||||
dev_err(&client->dev,
|
||||
"Adapter does not support some i2c transaction\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
dev_data = iio_priv(indio_dev);
|
||||
dev_data->client = client;
|
||||
dev_data->res_index = 0;
|
||||
mutex_init(&dev_data->lock);
|
||||
|
||||
indio_dev->info = &htu21_info;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = htu21_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(htu21_channels);
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
ret = ms_sensors_reset(client, HTU21_RESET, 15000);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = ms_sensors_read_serial(client, &serial_number);
|
||||
if (ret)
|
||||
return ret;
|
||||
dev_info(&client->dev, "Serial number : %llx", serial_number);
|
||||
|
||||
return devm_iio_device_register(&client->dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id htu21_id[] = {
|
||||
{"htu21", 0},
|
||||
{}
|
||||
};
|
||||
|
||||
static struct i2c_driver htu21_driver = {
|
||||
.probe = htu21_probe,
|
||||
.id_table = htu21_id,
|
||||
.driver = {
|
||||
.name = "htu21",
|
||||
},
|
||||
};
|
||||
|
||||
module_i2c_driver(htu21_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Measurement-Specialties htu21 temperature and humidity driver");
|
||||
MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
|
||||
MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue