[libata] pata_sil680: Add MMIO support

This patch adds MMIO support to the pata_sil680 for taskfile IOs,
based on what the old siimage does.

I haven't bothered changing the chip setup stuff from PCI config
cycles to MMIO though (siimage does it), I don't think it matters,
I've only adapted it to use MMIO for taskfile accesses.

I've tested it on a Cell blade and it seems to work fine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Benjamin Herrenschmidt 2007-07-06 19:21:22 -04:00 committed by Jeff Garzik
parent f4921aff5b
commit 2b9e68f728

View file

@ -279,7 +279,7 @@ static struct ata_port_operations sil680_port_ops = {
* Returns the final clock settings.
*/
static u8 sil680_init_chip(struct pci_dev *pdev)
static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
u32 class_rev = 0;
u8 tmpbyte = 0;
@ -297,6 +297,8 @@ static u8 sil680_init_chip(struct pci_dev *pdev)
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
switch(tmpbyte & 0x30) {
case 0x00:
/* 133 clock attempt to force it on */
@ -361,25 +363,76 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
};
const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
struct ata_host *host;
void __iomem *mmio_base;
int rc, try_mmio;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
switch(sil680_init_chip(pdev))
{
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
break;
case 0x30:
return -ENODEV;
}
if (!try_mmio)
goto use_ioports;
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
rc = pcim_enable_device(pdev);
if (rc)
return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
/* Allocate host and set it up */
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
if (!host)
return -ENOMEM;
host->iomap = pcim_iomap_table(pdev);
/* Setup DMA masks */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(pdev);
/* Get MMIO base and initialize port addresses */
mmio_base = host->iomap[SIL680_MMIO_BAR];
host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
ata_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
ata_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&sil680_sht);
use_ioports:
return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
sil680_init_chip(pdev);
int try_mmio;
sil680_init_chip(pdev, &try_mmio);
return ata_pci_device_resume(pdev);
}
#endif