mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-13 22:25:03 +00:00
Code Issues Releases Wiki Activity

[media] cx18: Make RF analog TV work for newer HVR-1600 models with silicon tuners

Browse source 
A previous changes which added the newer model HVR-1600's and DTV support for
them, neglected to add RF analog TV for them.  Fix RF analog TV for the newer
HVR-1600's which have a worldwide analog tuner assembly with a TDA18271 tuner
and TDA8295 demodulator.

Thanks go to Jeff Campbell and Mike Bradley for reproting the problem, and
also to Mike Bradley for doing a lot of the legwork to figure out the tuner
reset GPIO line, the demodulator I2C address, and that the GPIOs have to be
reinitialized after a cardtype switch.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Tested-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Andy Walls 2011-03-27 00:20:37 -03:00 committed by Mauro Carvalho Chehab
parent 834751d436
commit 2bfe2fa43e
4 changed files with 41 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
drivers/media/video/cx18/Kconfig
View file

@ -9,6 +9,9 @@ config VIDEO_CX18
select VIDEO_CS5345
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.

18
drivers/media/video/cx18/cx18-cards.c
View file

@ -39,6 +39,16 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
.tv = { 0x61, 0x60, I2C_CLIENT_END },
};
/*
* usual i2c tuner addresses to probe with additional demod address for
* an NXP TDA8295 at 0x42 (N.B. it can possibly be at 0x4b or 0x4c too).
*/
static struct cx18_card_tuner_i2c cx18_i2c_nxp = {
.radio = { I2C_CLIENT_END },
.demod = { 0x42, 0x43, I2C_CLIENT_END },
.tv = { 0x61, 0x60, I2C_CLIENT_END },
};
/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
This keeps the PCI ID database up to date. Note that the entries
must be added under vendor 0x4444 (Conexant) as subsystem IDs.
@ -131,15 +141,15 @@ static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
.tune_lane = 0,
.initial_emrs = 0,
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
.gpio_init.initial_value = 0x3801,
.gpio_init.direction = 0x3801,
.gpio_i2c_slave_reset = {
.active_lo_mask = 0x3001,
.active_lo_mask = 0x3801,
.msecs_asserted = 10,
.msecs_recovery = 40,
.ir_reset_mask = 0x0001,
},
.i2c = &cx18_i2c_std,
.i2c = &cx18_i2c_nxp,
};
static const struct cx18_card cx18_card_hvr1600_samsung = {

2
drivers/media/video/cx18/cx18-cards.h
View file

@ -109,7 +109,7 @@ struct cx18_card_tuner {
struct cx18_card_tuner_i2c {
unsigned short radio[2];/* radio tuner i2c address to probe */
unsigned short demod[2];/* demodulator i2c address to probe */
unsigned short demod[3];/* demodulator i2c address to probe */
unsigned short tv[4]; /* tv tuner i2c addresses to probe */
};

25
drivers/media/video/cx18/cx18-driver.c
View file

@ -423,7 +423,16 @@ static void cx18_process_eeprom(struct cx18 *cx)
return;
/* autodetect tuner standard */
if (tv.tuner_formats & V4L2_STD_PAL) {
#define TVEEPROM_TUNER_FORMAT_ALL (V4L2_STD_B | V4L2_STD_GH | \
V4L2_STD_MN | \
V4L2_STD_PAL_I | \
V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC | \
V4L2_STD_DK)
if ((tv.tuner_formats & TVEEPROM_TUNER_FORMAT_ALL)
== TVEEPROM_TUNER_FORMAT_ALL) {
CX18_DEBUG_INFO("Worldwide tuner detected\n");
cx->std = V4L2_STD_ALL;
} else if (tv.tuner_formats & V4L2_STD_PAL) {
CX18_DEBUG_INFO("PAL tuner detected\n");
cx->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
} else if (tv.tuner_formats & V4L2_STD_NTSC) {
@ -1001,7 +1010,15 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
/* Based on the model number the cardtype may be changed.
The PCI IDs are not always reliable. */
const struct cx18_card *orig_card = cx->card;
cx18_process_eeprom(cx);
if (cx->card != orig_card) {
/* Changed the cardtype; re-reset the I2C chips */
cx18_gpio_init(cx);
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
}
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
@ -1087,6 +1104,8 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
are not. */
cx->tuner_std = cx->std;
if (cx->std == V4L2_STD_ALL)
cx->std = V4L2_STD_NTSC_M;
retval = cx18_streams_setup(cx);
if (retval) {
@ -1133,6 +1152,7 @@ int cx18_init_on_first_open(struct cx18 *cx)
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
v4l2_std_id std;
fh.cx = cx;
@ -1220,7 +1240,8 @@ int cx18_init_on_first_open(struct cx18 *cx)
/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
in one place. */
cx->std++; /* Force full standard initialization */
cx18_s_std(NULL, &fh, &cx->tuner_std);
std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std;
cx18_s_std(NULL, &fh, &std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}