[libata sata_promise] Do not attempt to use SATA phy on PATA controllers

This commit is contained in:
Jeff Garzik 2005-08-29 05:12:30 -04:00
parent 02b3e4e2d7
commit 2cba582a49

View file

@ -79,7 +79,8 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r
static void pdc_eng_timeout(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc_port_stop(struct ata_port *ap);
static void pdc_phy_reset(struct ata_port *ap);
static void pdc_pata_phy_reset(struct ata_port *ap);
static void pdc_sata_phy_reset(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
@ -106,19 +107,22 @@ static Scsi_Host_Template pdc_ata_sht = {
.ordered_flush = 1,
};
static struct ata_port_operations pdc_ata_ops = {
static struct ata_port_operations pdc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
.phy_reset = pdc_phy_reset,
.phy_reset = pdc_sata_phy_reset,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.eng_timeout = pdc_eng_timeout,
.irq_handler = pdc_interrupt,
.irq_clear = pdc_irq_clear,
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
@ -126,6 +130,27 @@ static struct ata_port_operations pdc_ata_ops = {
.host_stop = ata_host_stop,
};
static struct ata_port_operations pdc_pata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
.phy_reset = pdc_pata_phy_reset,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.eng_timeout = pdc_eng_timeout,
.irq_handler = pdc_interrupt,
.irq_clear = pdc_irq_clear,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
.host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
/* board_2037x */
{
@ -135,7 +160,7 @@ static struct ata_port_info pdc_port_info[] = {
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_ata_ops,
.port_ops = &pdc_sata_ops,
},
/* board_20319 */
@ -146,7 +171,7 @@ static struct ata_port_info pdc_port_info[] = {
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_ata_ops,
.port_ops = &pdc_sata_ops,
},
/* board_20619 */
@ -157,7 +182,7 @@ static struct ata_port_info pdc_port_info[] = {
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_ata_ops,
.port_ops = &pdc_pata_ops,
},
};
@ -268,12 +293,23 @@ static void pdc_reset_port(struct ata_port *ap)
readl(mmio); /* flush */
}
static void pdc_phy_reset(struct ata_port *ap)
static void pdc_sata_phy_reset(struct ata_port *ap)
{
pdc_reset_port(ap);
sata_phy_reset(ap);
}
static void pdc_pata_phy_reset(struct ata_port *ap)
{
/* FIXME: add cable detect. Don't assume 40-pin cable */
ap->cbl = ATA_CBL_PATA40;
ap->udma_mask &= ATA_UDMA_MASK_40C;
pdc_reset_port(ap);
ata_port_probe(ap);
ata_bus_reset(ap);
}
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)