mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-03 23:58:05 +00:00
arm64: dts: qcom: sc8180x: Introduce Primus
Introduce support for the SC8180X reference device, aka Primus, with debug UART, regulators, UFS and USB support. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-15-vkoul@kernel.org
This commit is contained in:
Bjorn Andersson
Bjorn Andersson
parent
d3302290f5
commit
2ce38cc1e8
2 changed files with 707 additions and 0 deletions
|
|
@ -147,6 +147,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
|
||||
|
|
|
|||
706
arch/arm64/boot/dts/qcom/sc8180x-primus.dts
Normal file
706
arch/arm64/boot/dts/qcom/sc8180x-primus.dts
Normal file
|
|
@ -0,0 +1,706 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2020-2023, Linaro Limited
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sc8180x.dtsi"
|
||||
#include "sc8180x-pmics.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm SC8180x Primus";
|
||||
compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart12;
|
||||
serial1 = &uart13;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pmc8180c_lpg 4 1000000>;
|
||||
enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_pwm_default>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hall_int_active_state>;
|
||||
|
||||
lid-switch {
|
||||
gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
wakeup-source;
|
||||
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rmtfs_mem: rmtfs-region@85500000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0x0 0x85500000 0x0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
wlan_mem: wlan-region@8bc00000 {
|
||||
reg = <0x0 0x8bc00000 0x0 0x180000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp-region@96e00000 {
|
||||
reg = <0x0 0x96e00000 0x0 0x1c00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_mem: mpss-region@8d800000 {
|
||||
reg = <0x0 0x8d800000 0x0 0x9600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: gpu-region@98a00000 {
|
||||
reg = <0x0 0x98a00000 0x0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved-region@9a500000 {
|
||||
reg = <0x0 0x9a500000 0x0 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vreg_nvme_0p9: nvme-0p9-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_nvme_0p9";
|
||||
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_nvme_3p3: nvme-3p3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_nvme_3p3";
|
||||
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&pmc8180c_gpios 11 0>;
|
||||
enable-active-high;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_kb_tp_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
regulator-always-on;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&kb_tp_3v3_en_active_state>;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: pm8150-s4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
|
||||
|
||||
vreg_s5a_2p0: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p3: ldo9 {
|
||||
regulator-min-microvolt = <1296000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pmc8180c-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-l2-l3-supply = <&vreg_s6c_1p35>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s6c_1p35: smps6 {
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1372000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s8c_1p8: smps8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l3c_1p2: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4c_3p3: ldo4 {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3350000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
vreg_s4e_0p98: smps4 {
|
||||
regulator-min-microvolt = <992000>;
|
||||
regulator-max-microvolt = <992000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s5e_2p05: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1e_0p75: ldo1 {
|
||||
regulator-min-microvolt = <752000>;
|
||||
regulator-max-microvolt = <752000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5e_0p88: ldo5 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7e_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10e_2p9: ldo10 {
|
||||
regulator-min-microvolt = <2904000>;
|
||||
regulator-max-microvolt = <2904000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12e: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16e_3p0: ldo16 {
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dispcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_i2c_active_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchscreen@10 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x10>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
vdd-supply = <&vreg_l4c_3p3>;
|
||||
vddl-supply = <&vreg_l12e>;
|
||||
|
||||
post-power-on-delay-ms = <20>;
|
||||
|
||||
interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_active_state>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&aux_i2c_active_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchpad@15 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x15>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tp_int_active_state>;
|
||||
|
||||
vdd-supply = <&vdd_kb_tp_3v3>;
|
||||
};
|
||||
|
||||
keyboard@3a {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x3a>;
|
||||
hid-descr-addr = <0x1>;
|
||||
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&kb_int_active_state>;
|
||||
|
||||
vdd-supply = <&vdd_kb_tp_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_edp {
|
||||
data-lanes = <0 1 2 3>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edp_hpd_active>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
compatible = "edp-panel";
|
||||
|
||||
backlight = <&backlight>;
|
||||
|
||||
ports {
|
||||
port {
|
||||
auo_b133han05_in: endpoint {
|
||||
remote-endpoint = <&mdss_edp_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
mdss_edp_out: endpoint {
|
||||
remote-endpoint = <&auo_b133han05_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_default_state>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmc8180c_lpg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
memory-region = <&adsp_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
memory-region = <&mpss_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart12 {
|
||||
compatible = "qcom,geni-debug-uart";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart13 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart13_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3998-bt";
|
||||
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l9a_1p3>;
|
||||
vddch0-supply = <&vreg_l11c_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l10e_2p9>;
|
||||
vcc-max-microamp = <155000>;
|
||||
|
||||
vccq2-supply = <&vreg_l7e_1p8>;
|
||||
vccq2-max-microamp = <425000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_sec_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
memory-region = <&wlan_mem>;
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
|
||||
/* PINCTRL */
|
||||
|
||||
&pmc8180c_gpios {
|
||||
bl_pwm_default: bl-pwm-default-state {
|
||||
en-pins {
|
||||
pins = "gpio8";
|
||||
function = "normal";
|
||||
};
|
||||
|
||||
pwm-pins {
|
||||
pins = "gpio10";
|
||||
function = "func1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
|
||||
|
||||
aux_i2c_active_state: aux-i2c-active-state {
|
||||
pins = "gpio98", "gpio99";
|
||||
function = "qup7";
|
||||
|
||||
bias-disable;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
edp_hpd_active: epd-hpd-active-state {
|
||||
pins = "gpio10";
|
||||
function = "edp_hot";
|
||||
};
|
||||
|
||||
hall_int_active_state: hall-int-active-state {
|
||||
pins = "gpio121";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
kb_int_active_state: kb-int-active-state {
|
||||
int-n-pins {
|
||||
pins = "gpio37";
|
||||
function = "gpio";
|
||||
|
||||
bias-pull-up;
|
||||
intput-enable;
|
||||
};
|
||||
|
||||
kp-disable-pins {
|
||||
pins = "gpio135";
|
||||
function = "gpio";
|
||||
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
|
||||
pins = "gpio4";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie2_default_state: pcie2-default-state {
|
||||
clkreq-pins {
|
||||
pins = "gpio176";
|
||||
function = "pci_e2";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio175";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio177";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
tp_int_active_state: tp-int-active-state {
|
||||
tp-int-pins {
|
||||
pins = "gpio24";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
tp-close-n-pins {
|
||||
pins = "gpio116";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
ts_active_state: ts-active-state {
|
||||
int-n-pins {
|
||||
pins = "gpio122";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio54";
|
||||
function = "gpio";
|
||||
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
ts_i2c_active_state: ts-i2c-active-state {
|
||||
pins = "gpio114", "gpio115";
|
||||
function = "qup1";
|
||||
|
||||
/* External pull up */
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
uart13_state: uart13-state {
|
||||
cts-pins {
|
||||
pins = "gpio43";
|
||||
function = "qup13";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
rts-tx-pins {
|
||||
pins = "gpio44", "gpio45";
|
||||
function = "qup13";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pins = "gpio46";
|
||||
function = "qup13";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in a new issue