mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 02:50:43 +00:00
powerpc/85xx: Add P1010RDB board support
P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
parent
2e5460f31a
commit
2d05c392b8
6 changed files with 790 additions and 0 deletions
280
arch/powerpc/boot/dts/p1010rdb.dts
Normal file
280
arch/powerpc/boot/dts/p1010rdb.dts
Normal file
|
@ -0,0 +1,280 @@
|
|||
/*
|
||||
* P1010 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p1010si.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1010RDB";
|
||||
compatible = "fsl,P1010RDB";
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
ifc@ffe1e000 {
|
||||
/* NOR, NAND Flashes and CPLD on board */
|
||||
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
|
||||
0x1 0x0 0x0 0xff800000 0x00010000
|
||||
0x3 0x0 0x0 0xffb00000 0x00000020>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x2000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@40000 {
|
||||
/* 256KB for DTB Image */
|
||||
reg = <0x00040000 0x00040000>;
|
||||
label = "NOR DTB Image";
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 7 MB for Linux Kernel Image */
|
||||
reg = <0x00080000 0x00700000>;
|
||||
label = "NOR Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
/* 20MB for JFFS2 based Root file System */
|
||||
reg = <0x00800000 0x01400000>;
|
||||
label = "NOR JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@1f00000 {
|
||||
/* This location must not be altered */
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
/* 512KB for u-boot Environment Variables */
|
||||
reg = <0x01f00000 0x00100000>;
|
||||
label = "NOR U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,ifc-nand";
|
||||
reg = <0x1 0x0 0x10000>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "NAND U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x00100000 0x00100000>;
|
||||
label = "NAND DTB Image";
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00200000 0x00400000>;
|
||||
label = "NAND Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
/* 4MB for Compressed Root file System Image */
|
||||
reg = <0x00600000 0x00400000>;
|
||||
label = "NAND Compressed RFS Image";
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
/* 15MB for JFFS2 based Root file System */
|
||||
reg = <0x00a00000 0x00f00000>;
|
||||
label = "NAND JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@1900000 {
|
||||
/* 7MB for User Area */
|
||||
reg = <0x01900000 0x00700000>;
|
||||
label = "NAND User area";
|
||||
};
|
||||
};
|
||||
|
||||
cpld@3,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1010rdb-cpld";
|
||||
reg = <0x3 0x0 0x0000020>;
|
||||
bank-width = <1>;
|
||||
device-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partition@0 {
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
/* 1MB for Environment */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "SPI Flash U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 512KB for DTB Image */
|
||||
reg = <0x00100000 0x00080000>;
|
||||
label = "SPI Flash DTB Image";
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00180000 0x00400000>;
|
||||
label = "SPI Flash Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
/* 4MB for Compressed RFS Image */
|
||||
reg = <0x00580000 0x00400000>;
|
||||
label = "SPI Flash Compressed RFSImage";
|
||||
};
|
||||
|
||||
partition@980000 {
|
||||
/* 6.5MB for JFFS2 based RFS */
|
||||
reg = <0x00980000 0x00680000>;
|
||||
label = "SPI Flash JFFS2 RFS";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
can0@1c000 {
|
||||
fsl,flexcan-clock-source = "platform";
|
||||
};
|
||||
|
||||
can1@1d000 {
|
||||
fsl,flexcan-clock-source = "platform";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <2 1>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <2 1>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
phy-handle = <&phy1>;
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-connection-type = "sgmii";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
phy-handle = <&phy2>;
|
||||
tbi-handle = <&tbi1>;
|
||||
phy-connection-type = "sgmii";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
||||
>;
|
||||
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
||||
>;
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
376
arch/powerpc/boot/dts/p1010si.dtsi
Normal file
376
arch/powerpc/boot/dts/p1010si.dtsi
Normal file
|
@ -0,0 +1,376 @@
|
|||
/*
|
||||
* P1010si Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1010";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1010@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
ifc@ffe1e000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,ifc", "simple-bus";
|
||||
reg = <0x0 0xffe1e000 0 0x2000>;
|
||||
interrupts = <16 2 19 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1010-immr", "simple-bus";
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1010-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1010-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc8536-espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fsl,espi-num-chipselects = <1>;
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
sata@18000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x18000 0x1000>;
|
||||
cell-index = <1>;
|
||||
interrupts = <74 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
sata@19000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x19000 0x1000>;
|
||||
cell-index = <2>;
|
||||
interrupts = <41 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
can0@1c000 {
|
||||
compatible = "fsl,flexcan-v1.0";
|
||||
reg = <0x1c000 0x1000>;
|
||||
interrupts = <48 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fsl,flexcan-clock-divider = <2>;
|
||||
};
|
||||
|
||||
can1@1d000 {
|
||||
compatible = "fsl,flexcan-v1.0";
|
||||
reg = <0x1d000 0x1000>;
|
||||
interrupts = <61 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fsl,flexcan-clock-divider = <2>;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1010-l2-cache-controller",
|
||||
"fsl,p1014-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <20 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <21 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <22 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <23 2>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <28 0x2>;
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-mdio";
|
||||
reg = <0x24000 0x1000 0xb0030 0x4>;
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-tbi";
|
||||
reg = <0x25000 0x1000 0xb1030 0x4>;
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-tbi";
|
||||
reg = <0x26000 0x1000 0xb1030 0x4>;
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x8>;
|
||||
interrupt-parent = <&mpic>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
fsl,sdhci-auto-cmd12;
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
queue-group@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb0000 0x1000>;
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
interrupts = <29 2 30 2 34 2>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
queue-group@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb1000 0x1000>;
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
interrupts = <35 2 36 2 40 2>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
queue-group@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb2000 0x1000>;
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
interrupts = <31 2 32 2 33 2>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p1010-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0
|
||||
0xe1 0
|
||||
0xe2 0
|
||||
0xe3 0
|
||||
0xe4 0
|
||||
0xe5 0
|
||||
0xe6 0
|
||||
0xe7 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
compatible = "fsl,p1010-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
};
|
|
@ -26,6 +26,7 @@ CONFIG_MPC85xx_MDS=y
|
|||
CONFIG_MPC8536_DS=y
|
||||
CONFIG_MPC85xx_DS=y
|
||||
CONFIG_MPC85xx_RDB=y
|
||||
CONFIG_P1010_RDB=y
|
||||
CONFIG_P1022_DS=y
|
||||
CONFIG_P1023_RDS=y
|
||||
CONFIG_SOCRATES=y
|
||||
|
|
|
@ -67,6 +67,16 @@ config MPC85xx_RDB
|
|||
help
|
||||
This option enables support for the MPC85xx RDB (P2020 RDB) board
|
||||
|
||||
config P1010_RDB
|
||||
bool "Freescale P1010RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
help
|
||||
This option enables support for the MPC85xx RDB (P1010 RDB) board
|
||||
|
||||
P1010RDB contains P1010Si, which provides CPU performance up to 800
|
||||
MHz and 1600 DMIPS, additional functionality and faster interfaces
|
||||
(DDR3/3L, SATA II, and PCI Express).
|
||||
|
||||
config P1022_DS
|
||||
bool "Freescale P1022 DS"
|
||||
select DEFAULT_UIMAGE
|
||||
|
|
|
@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o
|
|||
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
|
||||
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
|
||||
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
|
||||
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
|
||||
obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
||||
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
|
||||
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
|
||||
|
|
122
arch/powerpc/platforms/85xx/p1010rdb.c
Normal file
122
arch/powerpc/platforms/85xx/p1010rdb.c
Normal file
|
@ -0,0 +1,122 @@
|
|||
/*
|
||||
* P1010RDB Board Setup
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
|
||||
void __init p1010_rdb_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic;
|
||||
struct resource r;
|
||||
struct device_node *np;
|
||||
|
||||
np = of_find_node_by_type(NULL, "open-pic");
|
||||
if (np == NULL) {
|
||||
printk(KERN_ERR "Could not find open-pic node\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (of_address_to_resource(np, 0, &r)) {
|
||||
printk(KERN_ERR "Failed to map mpic register space\n");
|
||||
of_node_put(np);
|
||||
return;
|
||||
}
|
||||
|
||||
mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET |
|
||||
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
|
||||
BUG_ON(mpic == NULL);
|
||||
of_node_put(np);
|
||||
|
||||
mpic_init(mpic);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init p1010_rdb_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("p1010_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,p1010-pcie"))
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
|
||||
}
|
||||
|
||||
static struct of_device_id __initdata p1010rdb_ids[] = {
|
||||
{ .type = "soc", },
|
||||
{ .compatible = "soc", },
|
||||
{ .compatible = "simple-bus", },
|
||||
{},
|
||||
};
|
||||
|
||||
static int __init p1010rdb_publish_devices(void)
|
||||
{
|
||||
return of_platform_bus_probe(NULL, p1010rdb_ids, NULL);
|
||||
}
|
||||
machine_device_initcall(p1010_rdb, p1010rdb_publish_devices);
|
||||
machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p1010_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P1010RDB"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p1010_rdb) {
|
||||
.name = "P1010 RDB",
|
||||
.probe = p1010_rdb_probe,
|
||||
.setup_arch = p1010_rdb_setup_arch,
|
||||
.init_IRQ = p1010_rdb_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
Loading…
Reference in a new issue