mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 10:57:46 +00:00
regulator: anatop: patching to device-tree property "reg".
Change "reg" to "anatop-reg-offset" due to there is a warning of handling no size field in reg. This patch also adds the missing device-tree binding documentation. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
9300928692
commit
2f2cc27f50
2 changed files with 32 additions and 2 deletions
|
@ -0,0 +1,29 @@
|
|||
Anatop Voltage regulators
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "fsl,anatop-regulator"
|
||||
- anatop-reg-offset: Anatop MFD register offset
|
||||
- anatop-vol-bit-shift: Bit shift for the register
|
||||
- anatop-vol-bit-width: Number of bits used in the register
|
||||
- anatop-min-bit-val: Minimum value of this register
|
||||
- anatop-min-voltage: Minimum voltage of this regulator
|
||||
- anatop-max-voltage: Maximum voltage of this regulator
|
||||
|
||||
Any property defined as part of the core regulator
|
||||
binding, defined in regulator.txt, can also be used.
|
||||
|
||||
Example:
|
||||
|
||||
regulator-vddpu {
|
||||
compatible = "fsl,anatop-regulator";
|
||||
regulator-name = "vddpu";
|
||||
regulator-min-microvolt = <725000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
anatop-reg-offset = <0x140>;
|
||||
anatop-vol-bit-shift = <9>;
|
||||
anatop-vol-bit-width = <5>;
|
||||
anatop-min-bit-val = <1>;
|
||||
anatop-min-voltage = <725000>;
|
||||
anatop-max-voltage = <1300000>;
|
||||
};
|
|
@ -138,9 +138,10 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
|
|||
rdesc->type = REGULATOR_VOLTAGE;
|
||||
rdesc->owner = THIS_MODULE;
|
||||
sreg->mfd = anatopmfd;
|
||||
ret = of_property_read_u32(np, "reg", &sreg->control_reg);
|
||||
ret = of_property_read_u32(np, "anatop-reg-offset",
|
||||
&sreg->control_reg);
|
||||
if (ret) {
|
||||
dev_err(dev, "no reg property set\n");
|
||||
dev_err(dev, "no anatop-reg-offset property set\n");
|
||||
goto anatop_probe_end;
|
||||
}
|
||||
ret = of_property_read_u32(np, "anatop-vol-bit-width",
|
||||
|
|
Loading…
Reference in a new issue