mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-03 23:58:05 +00:00
Merge series "regulator: mcp16502: add support for ramp delay" from Claudiu Beznea <claudiu.beznea@microchip.com>:
Hi, This series adds support for ramp delay on mcp16502. It also adds some cleanup on mcp16502. Apart from that patches 1/6 fixes the selector validation in case the regulator::desc::linear_min_sel is not zero. Thank you, Claudiu Beznea Changes in v3: - fix compilation error in patch 5/6 Reported-by: kernel test robot <lkp@intel.com> Changes in v2: - rebase on top of regulator/for-next - checked 1/6 and 3/6 applies on top of regulator/for-5.10 Claudiu Beznea (6): regulator: core: validate selector against linear_min_sel regulator: core: do not continue if selector match regulator: mcp16502: add linear_min_sel regulator: mcp16502: adapt for get/set on other registers regulator: mcp16502: add support for ramp delay regulator: mcp16502: remove void documentation of struct mcp16502 drivers/regulator/core.c | 12 +++- drivers/regulator/helpers.c | 3 +- drivers/regulator/mcp16502.c | 135 ++++++++++++++++++++++++++++++++++++------- 3 files changed, 127 insertions(+), 23 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
This commit is contained in:
Mark Brown
commit
2f595d0861
3 changed files with 124 additions and 23 deletions
|
|
@ -2958,7 +2958,8 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
|
|||
return rdev->desc->fixed_uV;
|
||||
|
||||
if (ops->list_voltage) {
|
||||
if (selector >= rdev->desc->n_voltages)
|
||||
if (selector >= rdev->desc->n_voltages ||
|
||||
selector < rdev->desc->linear_min_sel)
|
||||
return -EINVAL;
|
||||
if (lock)
|
||||
regulator_lock(rdev);
|
||||
|
|
@ -3109,7 +3110,8 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
|
|||
struct regulator_dev *rdev = regulator->rdev;
|
||||
const struct regulator_ops *ops = rdev->desc->ops;
|
||||
|
||||
if (selector >= rdev->desc->n_voltages)
|
||||
if (selector >= rdev->desc->n_voltages ||
|
||||
selector < rdev->desc->linear_min_sel)
|
||||
return -EINVAL;
|
||||
if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
|
||||
return -EOPNOTSUPP;
|
||||
|
|
@ -4032,6 +4034,9 @@ int regulator_set_voltage_time(struct regulator *regulator,
|
|||
|
||||
for (i = 0; i < rdev->desc->n_voltages; i++) {
|
||||
/* We only look for exact voltage matches here */
|
||||
if (i < rdev->desc->linear_min_sel)
|
||||
continue;
|
||||
|
||||
voltage = regulator_list_voltage(regulator, i);
|
||||
if (voltage < 0)
|
||||
return -EINVAL;
|
||||
|
|
|
|||
|
|
@ -647,7 +647,8 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (selector >= rdev->desc->n_voltages)
|
||||
if (selector >= rdev->desc->n_voltages ||
|
||||
selector < rdev->desc->linear_min_sel)
|
||||
return -EINVAL;
|
||||
|
||||
return rdev->desc->volt_table[selector];
|
||||
|
|
|
|||
|
|
@ -22,8 +22,9 @@
|
|||
#define VDD_LOW_SEL 0x0D
|
||||
#define VDD_HIGH_SEL 0x3F
|
||||
|
||||
#define MCP16502_FLT BIT(7)
|
||||
#define MCP16502_ENS BIT(0)
|
||||
#define MCP16502_FLT BIT(7)
|
||||
#define MCP16502_DVSR GENMASK(3, 2)
|
||||
#define MCP16502_ENS BIT(0)
|
||||
|
||||
/*
|
||||
* The PMIC has four sets of registers corresponding to four power modes:
|
||||
|
|
@ -54,13 +55,9 @@
|
|||
* This function is useful for iterating over all regulators and accessing their
|
||||
* registers in a generic way or accessing a regulator device by its id.
|
||||
*/
|
||||
#define MCP16502_BASE(i) (((i) + 1) << 4)
|
||||
#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
|
||||
#define MCP16502_STAT_BASE(i) ((i) + 5)
|
||||
|
||||
#define MCP16502_OFFSET_MODE_A 0
|
||||
#define MCP16502_OFFSET_MODE_LPM 1
|
||||
#define MCP16502_OFFSET_MODE_HIB 2
|
||||
|
||||
#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
|
||||
#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
|
||||
#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
|
||||
|
|
@ -75,6 +72,29 @@
|
|||
#define MCP16502_MIN_REG 0x0
|
||||
#define MCP16502_MAX_REG 0x65
|
||||
|
||||
/**
|
||||
* enum mcp16502_reg - MCP16502 regulators's registers
|
||||
* @MCP16502_REG_A: active state register
|
||||
* @MCP16502_REG_LPM: low power mode state register
|
||||
* @MCP16502_REG_HIB: hibernate state register
|
||||
* @MCP16502_REG_SEQ: startup sequence register
|
||||
* @MCP16502_REG_CFG: configuration register
|
||||
*/
|
||||
enum mcp16502_reg {
|
||||
MCP16502_REG_A,
|
||||
MCP16502_REG_LPM,
|
||||
MCP16502_REG_HIB,
|
||||
MCP16502_REG_HPM,
|
||||
MCP16502_REG_SEQ,
|
||||
MCP16502_REG_CFG,
|
||||
};
|
||||
|
||||
/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
|
||||
static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 };
|
||||
|
||||
/* Ramp delay (uV/us) for buck2, buck3, buck4. */
|
||||
static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 };
|
||||
|
||||
static unsigned int mcp16502_of_map_mode(unsigned int mode)
|
||||
{
|
||||
if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
|
||||
|
|
@ -93,6 +113,7 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode)
|
|||
.owner = THIS_MODULE, \
|
||||
.n_voltages = MCP16502_VSEL + 1, \
|
||||
.linear_ranges = _ranges, \
|
||||
.linear_min_sel = VDD_LOW_SEL, \
|
||||
.n_linear_ranges = ARRAY_SIZE(_ranges), \
|
||||
.of_match = of_match_ptr(_name), \
|
||||
.of_map_mode = mcp16502_of_map_mode, \
|
||||
|
|
@ -114,8 +135,6 @@ enum {
|
|||
|
||||
/*
|
||||
* struct mcp16502 - PMIC representation
|
||||
* @rdev: the regulators belonging to this chip
|
||||
* @rmap: regmap to be used for I2C communication
|
||||
* @lpm: LPM GPIO descriptor
|
||||
*/
|
||||
struct mcp16502 {
|
||||
|
|
@ -143,22 +162,20 @@ static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
|
|||
}
|
||||
|
||||
/*
|
||||
* mcp16502_get_reg() - get the PMIC's configuration register for opmode
|
||||
* mcp16502_get_reg() - get the PMIC's state configuration register for opmode
|
||||
*
|
||||
* @rdev: the regulator whose register we are searching
|
||||
* @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
|
||||
*/
|
||||
static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
|
||||
static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
|
||||
{
|
||||
int reg = MCP16502_BASE(rdev_get_id(rdev));
|
||||
|
||||
switch (opmode) {
|
||||
case MCP16502_OPMODE_ACTIVE:
|
||||
return reg + MCP16502_OFFSET_MODE_A;
|
||||
return MCP16502_REG_BASE(rdev_get_id(rdev), A);
|
||||
case MCP16502_OPMODE_LPM:
|
||||
return reg + MCP16502_OFFSET_MODE_LPM;
|
||||
return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
|
||||
case MCP16502_OPMODE_HIB:
|
||||
return reg + MCP16502_OFFSET_MODE_HIB;
|
||||
return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
|
@ -178,7 +195,7 @@ static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
|
|||
unsigned int val;
|
||||
int ret, reg;
|
||||
|
||||
reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
|
||||
reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
|
|
@ -209,7 +226,7 @@ static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
|
|||
int val;
|
||||
int reg;
|
||||
|
||||
reg = mcp16502_get_reg(rdev, op_mode);
|
||||
reg = mcp16502_get_state_reg(rdev, op_mode);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
|
|
@ -259,6 +276,80 @@ static int mcp16502_get_status(struct regulator_dev *rdev)
|
|||
return REGULATOR_STATUS_UNDEFINED;
|
||||
}
|
||||
|
||||
static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
|
||||
unsigned int old_sel,
|
||||
unsigned int new_sel)
|
||||
{
|
||||
static const u8 us_ramp[] = { 8, 16, 24, 32 };
|
||||
int id = rdev_get_id(rdev);
|
||||
unsigned int uV_delta, val;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
val = (val & MCP16502_DVSR) >> 2;
|
||||
uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
|
||||
old_sel * rdev->desc->linear_ranges->step);
|
||||
switch (id) {
|
||||
case BUCK1:
|
||||
case LDO1:
|
||||
case LDO2:
|
||||
ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
|
||||
mcp16502_ramp_b1l12[val]);
|
||||
break;
|
||||
|
||||
case BUCK2:
|
||||
case BUCK3:
|
||||
case BUCK4:
|
||||
ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
|
||||
mcp16502_ramp_b234[val]);
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
const int *ramp;
|
||||
int id = rdev_get_id(rdev);
|
||||
unsigned int i, size;
|
||||
|
||||
switch (id) {
|
||||
case BUCK1:
|
||||
case LDO1:
|
||||
case LDO2:
|
||||
ramp = mcp16502_ramp_b1l12;
|
||||
size = ARRAY_SIZE(mcp16502_ramp_b1l12);
|
||||
break;
|
||||
|
||||
case BUCK2:
|
||||
case BUCK3:
|
||||
case BUCK4:
|
||||
ramp = mcp16502_ramp_b234;
|
||||
size = ARRAY_SIZE(mcp16502_ramp_b234);
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (i = 0; i < size; i++) {
|
||||
if (ramp[i] == ramp_delay)
|
||||
break;
|
||||
}
|
||||
if (i == size)
|
||||
return -EINVAL;
|
||||
|
||||
return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG),
|
||||
MCP16502_DVSR, (i << 2));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
/*
|
||||
* mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
|
||||
|
|
@ -268,10 +359,10 @@ static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
|
|||
{
|
||||
switch (pm_suspend_target_state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
|
||||
return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
|
||||
case PM_SUSPEND_ON:
|
||||
case PM_SUSPEND_MEM:
|
||||
return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
|
||||
return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
|
||||
default:
|
||||
dev_err(&rdev->dev, "invalid suspend target: %d\n",
|
||||
pm_suspend_target_state);
|
||||
|
|
@ -353,6 +444,8 @@ static const struct regulator_ops mcp16502_buck_ops = {
|
|||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_status = mcp16502_get_status,
|
||||
.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
|
||||
.set_ramp_delay = mcp16502_set_ramp_delay,
|
||||
|
||||
.set_mode = mcp16502_set_mode,
|
||||
.get_mode = mcp16502_get_mode,
|
||||
|
|
@ -377,6 +470,8 @@ static const struct regulator_ops mcp16502_ldo_ops = {
|
|||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_status = mcp16502_get_status,
|
||||
.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
|
||||
.set_ramp_delay = mcp16502_set_ramp_delay,
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
.set_suspend_voltage = mcp16502_set_suspend_voltage,
|
||||
|
|
|
|||
Loading…
Reference in a new issue