From 3002b8642f016d7fe3ff56240dacea1075f6b877 Mon Sep 17 00:00:00 2001 From: Henning Schild Date: Thu, 27 Apr 2023 17:20:55 +0200 Subject: [PATCH] gpio-f7188x: fix chip name and pin count on Nuvoton chip In fact the device with chip id 0xD283 is called NCT6126D, and that is the chip id the Nuvoton code was written for. Correct that name to avoid confusion, because a NCT6116D in fact exists as well but has another chip id, and is currently not supported. The look at the spec also revealed that GPIO group7 in fact has 8 pins, so correct the pin count in that group as well. Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116") Reported-by: Xing Tong Wu Signed-off-by: Henning Schild Acked-by: Simon Guinot Signed-off-by: Bartosz Golaszewski --- drivers/gpio/Kconfig | 2 +- drivers/gpio/gpio-f7188x.c | 28 ++++++++++++++-------------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5521f060d58e..f45c6a36551c 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -897,7 +897,7 @@ config GPIO_F7188X help This option enables support for GPIOs found on Fintek Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866. - As well as Nuvoton Super-I/O chip NCT6116D. + As well as Nuvoton Super-I/O chip NCT6126D. To compile this driver as a module, choose M here: the module will be called f7188x-gpio. diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c index 9effa7769bef..f54ca5a1775e 100644 --- a/drivers/gpio/gpio-f7188x.c +++ b/drivers/gpio/gpio-f7188x.c @@ -48,7 +48,7 @@ /* * Nuvoton devices. */ -#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */ +#define SIO_NCT6126D_ID 0xD283 /* NCT6126D chipset ID */ #define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */ @@ -62,7 +62,7 @@ enum chips { f81866, f81804, f81865, - nct6116d, + nct6126d, }; static const char * const f7188x_names[] = { @@ -74,7 +74,7 @@ static const char * const f7188x_names[] = { "f81866", "f81804", "f81865", - "nct6116d", + "nct6126d", }; struct f7188x_sio { @@ -187,8 +187,8 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, /* Output mode register (0:open drain 1:push-pull). */ #define f7188x_gpio_out_mode(base) ((base) + 3) -#define f7188x_gpio_dir_invert(type) ((type) == nct6116d) -#define f7188x_gpio_data_single(type) ((type) == nct6116d) +#define f7188x_gpio_dir_invert(type) ((type) == nct6126d) +#define f7188x_gpio_data_single(type) ((type) == nct6126d) static struct f7188x_gpio_bank f71869_gpio_bank[] = { F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), @@ -274,7 +274,7 @@ static struct f7188x_gpio_bank f81865_gpio_bank[] = { F7188X_GPIO_BANK(60, 5, 0x90, DRVNAME "-6"), }; -static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { +static struct f7188x_gpio_bank nct6126d_gpio_bank[] = { F7188X_GPIO_BANK(0, 8, 0xE0, DRVNAME "-0"), F7188X_GPIO_BANK(10, 8, 0xE4, DRVNAME "-1"), F7188X_GPIO_BANK(20, 8, 0xE8, DRVNAME "-2"), @@ -282,7 +282,7 @@ static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { F7188X_GPIO_BANK(40, 8, 0xF0, DRVNAME "-4"), F7188X_GPIO_BANK(50, 8, 0xF4, DRVNAME "-5"), F7188X_GPIO_BANK(60, 8, 0xF8, DRVNAME "-6"), - F7188X_GPIO_BANK(70, 1, 0xFC, DRVNAME "-7"), + F7188X_GPIO_BANK(70, 8, 0xFC, DRVNAME "-7"), }; static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) @@ -490,9 +490,9 @@ static int f7188x_gpio_probe(struct platform_device *pdev) data->nr_bank = ARRAY_SIZE(f81865_gpio_bank); data->bank = f81865_gpio_bank; break; - case nct6116d: - data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank); - data->bank = nct6116d_gpio_bank; + case nct6126d: + data->nr_bank = ARRAY_SIZE(nct6126d_gpio_bank); + data->bank = nct6126d_gpio_bank; break; default: return -ENODEV; @@ -559,9 +559,9 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) case SIO_F81865_ID: sio->type = f81865; break; - case SIO_NCT6116D_ID: + case SIO_NCT6126D_ID: sio->device = SIO_LD_GPIO_NUVOTON; - sio->type = nct6116d; + sio->type = nct6126d; break; default: pr_info("Unsupported Fintek device 0x%04x\n", devid); @@ -569,7 +569,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) } /* double check manufacturer where possible */ - if (sio->type != nct6116d) { + if (sio->type != nct6126d) { manid = superio_inw(addr, SIO_FINTEK_MANID); if (manid != SIO_FINTEK_ID) { pr_debug("Not a Fintek device at 0x%08x\n", addr); @@ -581,7 +581,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) err = 0; pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr); - if (sio->type != nct6116d) + if (sio->type != nct6126d) pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV)); err: