dt-bindings: more status property removal from examples

Whack-a-mole some more occurrences of status in examples.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Rob Herring 2018-04-17 08:53:39 -05:00
parent 9cf7c9cb6b
commit 304a39b4bc
7 changed files with 0 additions and 20 deletions

View file

@ -23,7 +23,6 @@ Controller:
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
status = "disable";
};
Client:

View file

@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
power-domains = <&k2g_pds 0xb>;
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
clock-names = "fck", "mmchsdb_fck";
status = "disabled";
};
------------------------------------------------------------------------------

View file

@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3C 4>;
status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";

View file

@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
status = "disabled";
};
sdhi1: sd@ee120000 {
@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
status = "disabled";
};
sdhi2: sd@ee140000 {
@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
status = "disabled";
};
sdhi3: sd@ee160000 {
@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};

View file

@ -20,7 +20,6 @@ Required NFI properties:
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
- clock-names: NFI clocks internal name.
- status: Disabled default. Then set "okay" by platform.
- ecc-engine: Required ECC Engine node.
- #address-cells: NAND chip index, should be 1.
- #size-cells: Should be 0.
@ -34,7 +33,6 @@ Example:
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
@ -152,7 +150,6 @@ Required BCH properties:
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
- clock-names: ECC clocks internal name.
- status: Disabled default. Then set "okay" by platform.
Example:
@ -162,5 +159,4 @@ Example:
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
status = "disabled";
};

View file

@ -25,8 +25,6 @@ Optional properties:
Example:
SoC-specific DT Entry:
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
@ -50,8 +48,3 @@ SoC-specific DT Entry:
clocks = <&pcie0clk 0>;
};
Board-specific DT Entry:
&pcie0 {
status = "ok";
};

View file

@ -20,5 +20,4 @@ Example:
assert-falling-edge;
compatible = "pps-gpio";
status = "okay";
};