diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 23fcb05175be..53305bd08182 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. -Types: -========== -Types are groupings of codes under a logical input construct. Each type has a -set of applicable codes to be used in generating events. See the Codes section -for details on valid codes for each type. +Event types: +=========== +Event types are groupings of codes under a logical input construct. Each +type has a set of applicable codes to be used in generating events. See the +Codes section for details on valid codes for each type. * EV_SYN: - Used as markers to separate events. Events may be separated in time or in @@ -63,9 +63,9 @@ for details on valid codes for each type. * EV_FF_STATUS: - Used to receive force feedback device status. -Codes: -========== -Codes define the precise type of event. +Event codes: +=========== +Event codes define the precise type of event. EV_SYN: ---------- @@ -220,6 +220,56 @@ EV_PWR: EV_PWR events are a special type of event used specifically for power mangement. Its usage is not well defined. To be addressed later. +Device properties: +================= +Normally, userspace sets up an input device based on the data it emits, +i.e., the event types. In the case of two devices emitting the same event +types, additional information can be provided in the form of device +properties. + +INPUT_PROP_DIRECT + INPUT_PROP_POINTER: +-------------------------------------- +The INPUT_PROP_DIRECT property indicates that device coordinates should be +directly mapped to screen coordinates (not taking into account trivial +transformations, such as scaling, flipping and rotating). Non-direct input +devices require non-trivial transformation, such as absolute to relative +transformation for touchpads. Typical direct input devices: touchscreens, +drawing tablets; non-direct devices: touchpads, mice. + +The INPUT_PROP_POINTER property indicates that the device is not transposed +on the screen and thus requires use of an on-screen pointer to trace user's +movements. Typical pointer devices: touchpads, tablets, mice; non-pointer +device: touchscreen. + +If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is +considered undefined and the device type should be deduced in the +traditional way, using emitted event types. + +INPUT_PROP_BUTTONPAD: +-------------------- +For touchpads where the button is placed beneath the surface, such that +pressing down on the pad causes a button click, this property should be +set. Common in clickpad notebooks and macbooks from 2009 and onwards. + +Originally, the buttonpad property was coded into the bcm5974 driver +version field under the name integrated button. For backwards +compatibility, both methods need to be checked in userspace. + +INPUT_PROP_SEMI_MT: +------------------ +Some touchpads, most common between 2008 and 2011, can detect the presence +of multiple contacts without resolving the individual positions; only the +number of contacts and a rectangular shape is known. For such +touchpads, the semi-mt property should be set. + +Depending on the device, the rectangle may enclose all touches, like a +bounding box, or just some of them, for instance the two most recent +touches. The diversity makes the rectangle of limited use, but some +gestures can normally be extracted from it. + +If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT +device. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. @@ -240,6 +290,8 @@ used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch contact. BTN_TOOL_ events should be reported where possible. +For new hardware, INPUT_PROP_DIRECT should be set. + Trackpads: ---------- Legacy trackpads that only provide relative position information must report @@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active on the trackpad. Where multi-finger support is available, BTN_TOOL_ should be used to report the number of touches active on the trackpad. +For new hardware, INPUT_PROP_POINTER should be set. + Tablets: ---------- BTN_TOOL_ events must be reported when a stylus or other tool is active on @@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use meaningful buttons, like BTN_FORWARD, unless the button is labeled for that purpose on the device. + +For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set. diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 76457d50bc34..afc166fcc3d9 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -386,7 +386,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, struct evdev_client *client = file->private_data; struct evdev *evdev = client->evdev; struct input_event event; - int retval; + int retval = 0; if (count < input_event_size()) return -EINVAL; diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index a588578037eb..67bec14e8b96 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -34,7 +34,6 @@ #include #include - /* * The TWL4030 family chips include a keypad controller that supports * up to an 8x8 switch matrix. The controller can issue system wakeup @@ -302,7 +301,7 @@ static int __devinit twl4030_kp_program(struct twl4030_keypad *kp) if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0) return -EIO; - /* Set timeout period to 100 ms */ + /* Set timeout period to 200 ms */ i = KEYP_PERIOD_US(200000, PTV_PRESCALER); if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0) return -EIO; @@ -466,4 +465,3 @@ MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("TWL4030 Keypad Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:twl4030_keypad"); - diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index b4cfc6c8be89..5ec774d6c82b 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -512,6 +512,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), }, }, + { + /* Lenovo Ideapad U455 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20046"), + }, + }, { } }; diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 8250299fd64f..4494233d331a 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -164,7 +164,8 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, struct serio_raw_client *client = file->private_data; struct serio_raw *serio_raw = client->serio_raw; char uninitialized_var(c); - ssize_t retval = 0; + ssize_t read = 0; + int retval; if (serio_raw->dead) return -ENODEV; @@ -180,13 +181,15 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, if (serio_raw->dead) return -ENODEV; - while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) { - if (put_user(c, buffer++)) - return -EFAULT; - retval++; + while (read < count && serio_raw_fetch_byte(serio_raw, &c)) { + if (put_user(c, buffer++)) { + retval = -EFAULT; + break; + } + read++; } - return retval; + return read ?: retval; } static ssize_t serio_raw_write(struct file *file, const char __user *buffer, diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index b5ca4b2c08ec..004ff33ab38e 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -1,6 +1,8 @@ #ifndef _GPIO_KEYS_H #define _GPIO_KEYS_H +struct device; + struct gpio_keys_button { /* Configuration parameters */ unsigned int code; /* input event code (KEY_*, SW_*) */