net: use helpers to access uc list V2

This patch introduces three macros to work with uc list from net drivers.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jiri Pirko 2010-01-25 13:36:10 -08:00 committed by David S. Miller
parent 9010bc3364
commit 32e7bfc411
14 changed files with 38 additions and 33 deletions

View File

@ -48,7 +48,6 @@
#include <linux/cache.h>
#include <linux/firmware.h>
#include <linux/log2.h>
#include <linux/list.h>
#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
#define BCM_CNIC 1
@ -3579,14 +3578,14 @@ bnx2_set_rx_mode(struct net_device *dev)
sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
}
if (dev->uc.count > BNX2_MAX_UNICAST_ADDRESSES) {
if (netdev_uc_count(dev) > BNX2_MAX_UNICAST_ADDRESSES) {
rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
BNX2_RPM_SORT_USER0_PROM_VLAN;
} else if (!(dev->flags & IFF_PROMISC)) {
/* Add all entries into to the match filter list */
i = 0;
list_for_each_entry(ha, &dev->uc.list, list) {
netdev_for_each_uc_addr(ha, dev) {
bnx2_set_mac_addr(bp, ha->addr,
i + BNX2_START_UNICAST_ADDRESS_INDEX);
sort_mode |= (1 <<

View File

@ -2139,7 +2139,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
rctl |= E1000_RCTL_VFE;
}
if (netdev->uc.count > rar_entries - 1) {
if (netdev_uc_count(netdev) > rar_entries - 1) {
rctl |= E1000_RCTL_UPE;
} else if (!(netdev->flags & IFF_PROMISC)) {
rctl &= ~E1000_RCTL_UPE;
@ -2162,7 +2162,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
*/
i = 1;
if (use_uc)
list_for_each_entry(ha, &netdev->uc.list, list) {
netdev_for_each_uc_addr(ha, netdev) {
if (i == rar_entries)
break;
e1000_rar_set(hw, ha->addr, i++);

View File

@ -2905,12 +2905,13 @@ static int igb_write_uc_addr_list(struct net_device *netdev)
int count = 0;
/* return ENOMEM indicating insufficient memory for addresses */
if (netdev->uc.count > rar_entries)
if (netdev_uc_count(netdev) > rar_entries)
return -ENOMEM;
if (netdev->uc.count && rar_entries) {
if (!netdev_uc_empty(netdev) && rar_entries) {
struct netdev_hw_addr *ha;
list_for_each_entry(ha, &netdev->uc.list, list) {
netdev_for_each_uc_addr(ha, netdev) {
if (!rar_entries)
break;
igb_rar_set_qsel(adapter, ha->addr,

View File

@ -28,7 +28,6 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include "ixgbe.h"
@ -1347,7 +1346,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
/**
* ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
* @uc_list: the list of new addresses
* @netdev: pointer to net device structure
*
* The given list replaces any existing list. Clears the secondary addrs from
* receive address registers. Uses unused receive address registers for the
@ -1357,7 +1356,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
* manually putting the device into promiscuous mode.
**/
s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
struct list_head *uc_list)
struct net_device *netdev)
{
u32 i;
u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
@ -1381,7 +1380,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
}
/* Add the new addresses */
list_for_each_entry(ha, uc_list, list) {
netdev_for_each_uc_addr(ha, netdev) {
hw_dbg(hw, " Adding the secondary addresses:\n");
ixgbe_add_uc_addr(hw, ha->addr, 0);
}

View File

@ -60,7 +60,7 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count,
ixgbe_mc_addr_itr func);
s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
struct list_head *uc_list);
struct net_device *netdev);
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);

View File

@ -2568,7 +2568,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
/* reprogram secondary unicast list */
hw->mac.ops.update_uc_addr_list(hw, &netdev->uc.list);
hw->mac.ops.update_uc_addr_list(hw, netdev);
/* reprogram multicast list */
addr_count = netdev->mc_count;

View File

@ -30,7 +30,7 @@
#include <linux/types.h>
#include <linux/mdio.h>
#include <linux/list.h>
#include <linux/netdevice.h>
/* Vendor ID */
#define IXGBE_INTEL_VENDOR_ID 0x8086
@ -2405,7 +2405,7 @@ struct ixgbe_mac_operations {
s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
s32 (*init_rx_addrs)(struct ixgbe_hw *);
s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct list_head *);
s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct net_device *);
s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
ixgbe_mc_addr_itr);
s32 (*enable_mc)(struct ixgbe_hw *);

View File

@ -55,7 +55,6 @@
#include <linux/types.h>
#include <linux/inet_lro.h>
#include <asm/system.h>
#include <linux/list.h>
static char mv643xx_eth_driver_name[] = "mv643xx_eth";
static char mv643xx_eth_driver_version[] = "1.4";
@ -1697,7 +1696,7 @@ static u32 uc_addr_filter_mask(struct net_device *dev)
return 0;
nibbles = 1 << (dev->dev_addr[5] & 0x0f);
list_for_each_entry(ha, &dev->uc.list, list) {
netdev_for_each_uc_addr(ha, dev) {
if (memcmp(dev->dev_addr, ha->addr, 5))
return 0;
if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0)

View File

@ -6372,7 +6372,7 @@ static void niu_set_rx_mode(struct net_device *dev)
if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
np->flags |= NIU_FLAGS_MCAST;
alt_cnt = dev->uc.count;
alt_cnt = netdev_uc_count(dev);
if (alt_cnt > niu_num_alt_addr(np)) {
alt_cnt = 0;
np->flags |= NIU_FLAGS_PROMISC;
@ -6381,7 +6381,7 @@ static void niu_set_rx_mode(struct net_device *dev)
if (alt_cnt) {
int index = 0;
list_for_each_entry(ha, &dev->uc.list, list) {
netdev_for_each_uc_addr(ha, dev) {
err = niu_set_alt_mac(np, index, ha->addr);
if (err)
printk(KERN_WARNING PFX "%s: Error %d "

View File

@ -83,7 +83,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
unsigned int value = 0;
DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
__func__, dev->mc_count, dev->uc.count);
__func__, dev->mc_count, netdev_uc_count(dev));
if (dev->flags & IFF_PROMISC)
value = GMAC_FRAME_FILTER_PR;
@ -117,7 +117,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
}
/* Handle multiple unicast addresses (perfect filtering)*/
if (dev->uc.count > GMAC_MAX_UNICAST_ADDRESSES)
if (netdev_uc_count(dev) > GMAC_MAX_UNICAST_ADDRESSES)
/* Switch to promiscuous mode is more than 16 addrs
are required */
value |= GMAC_FRAME_FILTER_PR;
@ -125,9 +125,9 @@ static void dwmac1000_set_filter(struct net_device *dev)
int reg = 1;
struct netdev_hw_addr *ha;
list_for_each_entry(ha, &dev->uc.list, list) {
dwmac1000_set_umac_addr(ioaddr, ha->addr, reg);
reg++;
netdev_for_each_uc_addr(ha, dev) {
dwmac1000_set_umac_addr(ioaddr, ha->addr, reg);
reg++;
}
}

View File

@ -675,6 +675,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
struct virtio_net_ctrl_mac *mac_data;
struct dev_addr_list *addr;
struct netdev_hw_addr *ha;
int uc_count;
void *buf;
int i;
@ -701,8 +702,9 @@ static void virtnet_set_rx_mode(struct net_device *dev)
dev_warn(&dev->dev, "Failed to %sable allmulti mode.\n",
allmulti ? "en" : "dis");
uc_count = netdev_uc_count(dev);
/* MAC filter - use one buffer for both lists */
mac_data = buf = kzalloc(((dev->uc.count + dev->mc_count) * ETH_ALEN) +
mac_data = buf = kzalloc(((uc_count + dev->mc_count) * ETH_ALEN) +
(2 * sizeof(mac_data->entries)), GFP_ATOMIC);
if (!buf) {
dev_warn(&dev->dev, "No memory for MAC address buffer\n");
@ -712,16 +714,16 @@ static void virtnet_set_rx_mode(struct net_device *dev)
sg_init_table(sg, 2);
/* Store the unicast list and count in the front of the buffer */
mac_data->entries = dev->uc.count;
mac_data->entries = uc_count;
i = 0;
list_for_each_entry(ha, &dev->uc.list, list)
netdev_for_each_uc_addr(ha, dev)
memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
sg_set_buf(&sg[0], mac_data,
sizeof(mac_data->entries) + (dev->uc.count * ETH_ALEN));
sizeof(mac_data->entries) + (uc_count * ETH_ALEN));
/* multicast list and count fill the end */
mac_data = (void *)&mac_data->macs[dev->uc.count][0];
mac_data = (void *)&mac_data->macs[uc_count][0];
mac_data->entries = dev->mc_count;
addr = dev->mc_list;

View File

@ -622,7 +622,7 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
for (dm = dev->mc_list; dm; dm = dm->next)
qeth_l2_add_mc(card, dm->da_addr, 0);
list_for_each_entry(ha, &dev->uc.list, list)
netdev_for_each_uc_addr(ha, dev)
qeth_l2_add_mc(card, ha->addr, 1);
spin_unlock_bh(&card->mclock);

View File

@ -263,6 +263,11 @@ struct netdev_hw_addr_list {
int count;
};
#define netdev_uc_count(dev) ((dev)->uc.count)
#define netdev_uc_empty(dev) ((dev)->uc.count == 0)
#define netdev_for_each_uc_addr(ha, dev) \
list_for_each_entry(ha, &dev->uc.list, list)
struct hh_cache {
struct hh_cache *hh_next; /* Next entry */
atomic_t hh_refcnt; /* number of users */

View File

@ -3665,10 +3665,10 @@ void __dev_set_rx_mode(struct net_device *dev)
/* Unicast addresses changes may only happen under the rtnl,
* therefore calling __dev_set_promiscuity here is safe.
*/
if (dev->uc.count > 0 && !dev->uc_promisc) {
if (!netdev_uc_empty(dev) && !dev->uc_promisc) {
__dev_set_promiscuity(dev, 1);
dev->uc_promisc = 1;
} else if (dev->uc.count == 0 && dev->uc_promisc) {
} else if (netdev_uc_empty(dev) && dev->uc_promisc) {
__dev_set_promiscuity(dev, -1);
dev->uc_promisc = 0;
}