gpio: gpio-hisi: Add HiSilicon GPIO support

This GPIO driver is for HiSilicon's ARM SoC.

HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.

ACPI table example for this GPIO controller:
Device (GPO0)
{
	Name (_HID, "HISI0184")
	Device (PRTA)
	{
		Name (_ADR, Zero)
		Name (_UID, Zero)
		Name (_DSD, Package (0x01)
		{
			Package (0x02)
			{
				"ngpios",
				0x20
			}
		})
	}
}

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Luo Jiaxing 2020-12-14 16:24:13 +08:00 committed by Linus Walleij
parent 9777d0bfda
commit 356b01a986
3 changed files with 340 additions and 0 deletions

View file

@ -298,6 +298,17 @@ config GPIO_GRGPIO
Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
VHDL IP core library. VHDL IP core library.
config GPIO_HISI
tristate "HiSilicon GPIO controller driver"
depends on (ARM64 || COMPILE_TEST) && ACPI
select GPIO_GENERIC
select GPIOLIB_IRQCHIP
help
Say Y or M here to build support for the HiSilicon GPIO controller
driver GPIO block.
This GPIO controller support double-edge interrupt and multi-core
concurrent access.
config GPIO_HLWD config GPIO_HLWD
tristate "Nintendo Wii (Hollywood) GPIO" tristate "Nintendo Wii (Hollywood) GPIO"
depends on OF_GPIO depends on OF_GPIO

View file

@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_GW_PLD) += gpio-gw-pld.o obj-$(CONFIG_GPIO_GW_PLD) += gpio-gw-pld.o
obj-$(CONFIG_GPIO_HISI) += gpio-hisi.o
obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o obj-$(CONFIG_GPIO_ICH) += gpio-ich.o

328
drivers/gpio/gpio-hisi.c Normal file
View file

@ -0,0 +1,328 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 HiSilicon Limited. */
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#define HISI_GPIO_SWPORT_DR_SET_WX 0x000
#define HISI_GPIO_SWPORT_DR_CLR_WX 0x004
#define HISI_GPIO_SWPORT_DDR_SET_WX 0x010
#define HISI_GPIO_SWPORT_DDR_CLR_WX 0x014
#define HISI_GPIO_SWPORT_DDR_ST_WX 0x018
#define HISI_GPIO_INTEN_SET_WX 0x020
#define HISI_GPIO_INTEN_CLR_WX 0x024
#define HISI_GPIO_INTMASK_SET_WX 0x030
#define HISI_GPIO_INTMASK_CLR_WX 0x034
#define HISI_GPIO_INTTYPE_EDGE_SET_WX 0x040
#define HISI_GPIO_INTTYPE_EDGE_CLR_WX 0x044
#define HISI_GPIO_INT_POLARITY_SET_WX 0x050
#define HISI_GPIO_INT_POLARITY_CLR_WX 0x054
#define HISI_GPIO_DEBOUNCE_SET_WX 0x060
#define HISI_GPIO_DEBOUNCE_CLR_WX 0x064
#define HISI_GPIO_INTSTATUS_WX 0x070
#define HISI_GPIO_PORTA_EOI_WX 0x078
#define HISI_GPIO_EXT_PORT_WX 0x080
#define HISI_GPIO_INTCOMB_MASK_WX 0x0a0
#define HISI_GPIO_INT_DEDGE_SET 0x0b0
#define HISI_GPIO_INT_DEDGE_CLR 0x0b4
#define HISI_GPIO_INT_DEDGE_ST 0x0b8
#define HISI_GPIO_LINE_NUM_MAX 32
#define HISI_GPIO_DRIVER_NAME "gpio-hisi"
struct hisi_gpio {
struct gpio_chip chip;
struct device *dev;
void __iomem *reg_base;
unsigned int line_num;
struct irq_chip irq_chip;
int irq;
};
static inline u32 hisi_gpio_read_reg(struct gpio_chip *chip,
unsigned int off)
{
struct hisi_gpio *hisi_gpio =
container_of(chip, struct hisi_gpio, chip);
void __iomem *reg = hisi_gpio->reg_base + off;
return readl(reg);
}
static inline void hisi_gpio_write_reg(struct gpio_chip *chip,
unsigned int off, u32 val)
{
struct hisi_gpio *hisi_gpio =
container_of(chip, struct hisi_gpio, chip);
void __iomem *reg = hisi_gpio->reg_base + off;
writel(val, reg);
}
static void hisi_gpio_set_debounce(struct gpio_chip *chip, unsigned int off,
u32 debounce)
{
if (debounce)
hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_SET_WX, BIT(off));
else
hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_CLR_WX, BIT(off));
}
static int hisi_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long config)
{
u32 config_para = pinconf_to_config_param(config);
u32 config_arg;
switch (config_para) {
case PIN_CONFIG_INPUT_DEBOUNCE:
config_arg = pinconf_to_config_argument(config);
hisi_gpio_set_debounce(chip, offset, config_arg);
break;
default:
return -ENOTSUPP;
}
return 0;
}
static void hisi_gpio_set_ack(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
hisi_gpio_write_reg(chip, HISI_GPIO_PORTA_EOI_WX, BIT(irqd_to_hwirq(d)));
}
static void hisi_gpio_irq_set_mask(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_SET_WX, BIT(irqd_to_hwirq(d)));
}
static void hisi_gpio_irq_clr_mask(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_CLR_WX, BIT(irqd_to_hwirq(d)));
}
static int hisi_gpio_irq_set_type(struct irq_data *d, u32 type)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int mask = BIT(irqd_to_hwirq(d));
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_SET, mask);
break;
case IRQ_TYPE_EDGE_RISING:
hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask);
hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask);
break;
case IRQ_TYPE_EDGE_FALLING:
hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask);
hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask);
break;
case IRQ_TYPE_LEVEL_HIGH:
hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask);
hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask);
break;
case IRQ_TYPE_LEVEL_LOW:
hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask);
hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask);
break;
default:
return -EINVAL;
}
/*
* The dual-edge interrupt and other interrupt's registers do not
* take effect at the same time. The registers of the two-edge
* interrupts have higher priorities, the configuration of
* the dual-edge interrupts must be disabled before the configuration
* of other kind of interrupts.
*/
if (type != IRQ_TYPE_EDGE_BOTH) {
unsigned int both = hisi_gpio_read_reg(chip, HISI_GPIO_INT_DEDGE_ST);
if (both & mask)
hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_CLR, mask);
}
if (type & IRQ_TYPE_LEVEL_MASK)
irq_set_handler_locked(d, handle_level_irq);
else if (type & IRQ_TYPE_EDGE_BOTH)
irq_set_handler_locked(d, handle_edge_irq);
return 0;
}
static void hisi_gpio_irq_enable(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
hisi_gpio_irq_clr_mask(d);
hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_SET_WX, BIT(irqd_to_hwirq(d)));
}
static void hisi_gpio_irq_disable(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
hisi_gpio_irq_set_mask(d);
hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_CLR_WX, BIT(irqd_to_hwirq(d)));
}
static void hisi_gpio_irq_handler(struct irq_desc *desc)
{
struct hisi_gpio *hisi_gpio = irq_desc_get_handler_data(desc);
unsigned long irq_msk = hisi_gpio_read_reg(&hisi_gpio->chip,
HISI_GPIO_INTSTATUS_WX);
struct irq_chip *irq_c = irq_desc_get_chip(desc);
int hwirq;
chained_irq_enter(irq_c, desc);
for_each_set_bit(hwirq, &irq_msk, HISI_GPIO_LINE_NUM_MAX)
generic_handle_irq(irq_find_mapping(hisi_gpio->chip.irq.domain,
hwirq));
chained_irq_exit(irq_c, desc);
}
static void hisi_gpio_init_irq(struct hisi_gpio *hisi_gpio)
{
struct gpio_chip *chip = &hisi_gpio->chip;
struct gpio_irq_chip *girq_chip = &chip->irq;
/* Set hooks for irq_chip */
hisi_gpio->irq_chip.irq_ack = hisi_gpio_set_ack;
hisi_gpio->irq_chip.irq_mask = hisi_gpio_irq_set_mask;
hisi_gpio->irq_chip.irq_unmask = hisi_gpio_irq_clr_mask;
hisi_gpio->irq_chip.irq_set_type = hisi_gpio_irq_set_type;
hisi_gpio->irq_chip.irq_enable = hisi_gpio_irq_enable;
hisi_gpio->irq_chip.irq_disable = hisi_gpio_irq_disable;
girq_chip->chip = &hisi_gpio->irq_chip;
girq_chip->default_type = IRQ_TYPE_NONE;
girq_chip->num_parents = 1;
girq_chip->parents = &hisi_gpio->irq;
girq_chip->parent_handler = hisi_gpio_irq_handler;
girq_chip->parent_handler_data = hisi_gpio;
/* Clear Mask of GPIO controller combine IRQ */
hisi_gpio_write_reg(chip, HISI_GPIO_INTCOMB_MASK_WX, 1);
}
static const struct acpi_device_id hisi_gpio_acpi_match[] = {
{"HISI0184", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, hisi_gpio_acpi_match);
static void hisi_gpio_get_pdata(struct device *dev,
struct hisi_gpio *hisi_gpio)
{
struct platform_device *pdev = to_platform_device(dev);
struct fwnode_handle *fwnode;
int idx = 0;
device_for_each_child_node(dev, fwnode) {
/* Cycle for once, no need for an array to save line_num */
if (fwnode_property_read_u32(fwnode, "ngpios",
&hisi_gpio->line_num)) {
dev_err(dev,
"failed to get number of lines for port%d and use default value instead\n",
idx);
hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX;
}
if (WARN_ON(hisi_gpio->line_num > HISI_GPIO_LINE_NUM_MAX))
hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX;
hisi_gpio->irq = platform_get_irq(pdev, idx);
dev_info(dev,
"get hisi_gpio[%d] with %d lines\n", idx,
hisi_gpio->line_num);
idx++;
}
}
static int hisi_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
void __iomem *dat, *set, *clr;
struct hisi_gpio *hisi_gpio;
int port_num;
int ret;
/*
* One GPIO controller own one port currently,
* if we get more from ACPI table, return error.
*/
port_num = device_get_child_node_count(dev);
if (WARN_ON(port_num != 1))
return -ENODEV;
hisi_gpio = devm_kzalloc(dev, sizeof(*hisi_gpio), GFP_KERNEL);
if (!hisi_gpio)
return -ENOMEM;
hisi_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hisi_gpio->reg_base))
return PTR_ERR(hisi_gpio->reg_base);
hisi_gpio_get_pdata(dev, hisi_gpio);
hisi_gpio->dev = dev;
dat = hisi_gpio->reg_base + HISI_GPIO_EXT_PORT_WX;
set = hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_SET_WX;
clr = hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_CLR_WX;
ret = bgpio_init(&hisi_gpio->chip, hisi_gpio->dev, 0x4,
hisi_gpio->reg_base + HISI_GPIO_EXT_PORT_WX,
hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_SET_WX,
hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_CLR_WX,
hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_SET_WX,
hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_CLR_WX,
BGPIOF_NO_SET_ON_INPUT);
if (ret) {
dev_err(dev, "failed to init, ret = %d\n", ret);
return ret;
}
hisi_gpio->chip.set_config = hisi_gpio_set_config;
hisi_gpio->chip.ngpio = hisi_gpio->line_num;
hisi_gpio->chip.bgpio_dir_unreadable = 1;
hisi_gpio->chip.base = -1;
if (hisi_gpio->irq > 0)
hisi_gpio_init_irq(hisi_gpio);
ret = devm_gpiochip_add_data(dev, &hisi_gpio->chip, hisi_gpio);
if (ret) {
dev_err(dev, "failed to register gpiochip, ret = %d\n", ret);
return ret;
}
return 0;
}
static struct platform_driver hisi_gpio_driver = {
.driver = {
.name = HISI_GPIO_DRIVER_NAME,
.acpi_match_table = hisi_gpio_acpi_match,
},
.probe = hisi_gpio_probe,
};
module_platform_driver(hisi_gpio_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luo Jiaxing <luojiaxing@huawei.com>");
MODULE_DESCRIPTION("HiSilicon GPIO controller driver");
MODULE_ALIAS("platform:" HISI_GPIO_DRIVER_NAME);