mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-20 14:16:02 +00:00
DSA: Convert DSA comments to network-style comments
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
a0376db0f2
commit
3675c8d714
5 changed files with 93 additions and 232 deletions
|
@ -67,27 +67,19 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
|
|||
int i;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set all ports to the disabled state.
|
||||
*/
|
||||
/* Set all ports to the disabled state. */
|
||||
for (i = 0; i < 6; i++) {
|
||||
ret = REG_READ(REG_PORT(i), 0x04);
|
||||
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||||
}
|
||||
|
||||
/*
|
||||
* Wait for transmit queues to drain.
|
||||
*/
|
||||
/* Wait for transmit queues to drain. */
|
||||
msleep(2);
|
||||
|
||||
/*
|
||||
* Reset the switch.
|
||||
*/
|
||||
/* Reset the switch. */
|
||||
REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
|
||||
|
||||
/*
|
||||
* Wait up to one second for reset to complete.
|
||||
*/
|
||||
/* Wait up to one second for reset to complete. */
|
||||
for (i = 0; i < 1000; i++) {
|
||||
ret = REG_READ(REG_GLOBAL, 0x00);
|
||||
if ((ret & 0x8000) == 0x0000)
|
||||
|
@ -103,15 +95,13 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
|
|||
|
||||
static int mv88e6060_setup_global(struct dsa_switch *ds)
|
||||
{
|
||||
/*
|
||||
* Disable discarding of frames with excessive collisions,
|
||||
/* Disable discarding of frames with excessive collisions,
|
||||
* set the maximum frame size to 1536 bytes, and mask all
|
||||
* interrupt sources.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
|
||||
|
||||
/*
|
||||
* Enable automatic address learning, set the address
|
||||
/* Enable automatic address learning, set the address
|
||||
* database size to 1024 entries, and set the default aging
|
||||
* time to 5 minutes.
|
||||
*/
|
||||
|
@ -124,16 +114,14 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
|
|||
{
|
||||
int addr = REG_PORT(p);
|
||||
|
||||
/*
|
||||
* Do not force flow control, disable Ingress and Egress
|
||||
/* Do not force flow control, disable Ingress and Egress
|
||||
* Header tagging, disable VLAN tunneling, and set the port
|
||||
* state to Forwarding. Additionally, if this is the CPU
|
||||
* port, enable Ingress and Egress Trailer tagging mode.
|
||||
*/
|
||||
REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
|
||||
|
||||
/*
|
||||
* Port based VLAN map: give each port its own address
|
||||
/* Port based VLAN map: give each port its own address
|
||||
* database, allow the CPU port to talk to each of the 'real'
|
||||
* ports, and allow each of the 'real' ports to only talk to
|
||||
* the CPU port.
|
||||
|
@ -144,8 +132,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
|
|||
ds->phys_port_mask :
|
||||
(1 << ds->dst->cpu_port)));
|
||||
|
||||
/*
|
||||
* Port Association Vector: when learning source addresses
|
||||
/* Port Association Vector: when learning source addresses
|
||||
* of packets, add the address to the address database using
|
||||
* a port bitmap that has only the bit for this port set and
|
||||
* the other bits clear.
|
||||
|
|
|
@ -51,27 +51,19 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
|
|||
int i;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set all ports to the disabled state.
|
||||
*/
|
||||
/* Set all ports to the disabled state. */
|
||||
for (i = 0; i < 8; i++) {
|
||||
ret = REG_READ(REG_PORT(i), 0x04);
|
||||
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||||
}
|
||||
|
||||
/*
|
||||
* Wait for transmit queues to drain.
|
||||
*/
|
||||
/* Wait for transmit queues to drain. */
|
||||
msleep(2);
|
||||
|
||||
/*
|
||||
* Reset the switch.
|
||||
*/
|
||||
/* Reset the switch. */
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
|
||||
|
||||
/*
|
||||
* Wait up to one second for reset to complete.
|
||||
*/
|
||||
/* Wait up to one second for reset to complete. */
|
||||
for (i = 0; i < 1000; i++) {
|
||||
ret = REG_READ(REG_GLOBAL, 0x00);
|
||||
if ((ret & 0xc800) == 0xc800)
|
||||
|
@ -90,54 +82,45 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
|
|||
int ret;
|
||||
int i;
|
||||
|
||||
/*
|
||||
* Disable the PHY polling unit (since there won't be any
|
||||
/* Disable the PHY polling unit (since there won't be any
|
||||
* external PHYs to poll), don't discard packets with
|
||||
* excessive collisions, and mask all interrupt sources.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
|
||||
|
||||
/*
|
||||
* Set the default address aging time to 5 minutes, and
|
||||
/* Set the default address aging time to 5 minutes, and
|
||||
* enable address learn messages to be sent to all message
|
||||
* ports.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
|
||||
|
||||
/*
|
||||
* Configure the priority mapping registers.
|
||||
*/
|
||||
/* Configure the priority mapping registers. */
|
||||
ret = mv88e6xxx_config_prio(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Configure the upstream port, and configure the upstream
|
||||
/* Configure the upstream port, and configure the upstream
|
||||
* port as the port to which ingress and egress monitor frames
|
||||
* are to be sent.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
|
||||
|
||||
/*
|
||||
* Disable remote management for now, and set the switch's
|
||||
/* Disable remote management for now, and set the switch's
|
||||
* DSA device number.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
|
||||
|
||||
/*
|
||||
* Send all frames with destination addresses matching
|
||||
/* Send all frames with destination addresses matching
|
||||
* 01:80:c2:00:00:2x to the CPU port.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
|
||||
|
||||
/*
|
||||
* Send all frames with destination addresses matching
|
||||
/* Send all frames with destination addresses matching
|
||||
* 01:80:c2:00:00:0x to the CPU port.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
|
||||
|
||||
/*
|
||||
* Disable the loopback filter, disable flow control
|
||||
/* Disable the loopback filter, disable flow control
|
||||
* messages, disable flood broadcast override, disable
|
||||
* removing of provider tags, disable ATU age violation
|
||||
* interrupts, disable tag flow control, force flow
|
||||
|
@ -146,9 +129,7 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
|
|||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
|
||||
|
||||
/*
|
||||
* Program the DSA routing table.
|
||||
*/
|
||||
/* Program the DSA routing table. */
|
||||
for (i = 0; i < 32; i++) {
|
||||
int nexthop;
|
||||
|
||||
|
@ -159,33 +140,24 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
|
|||
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
|
||||
}
|
||||
|
||||
/*
|
||||
* Clear all trunk masks.
|
||||
*/
|
||||
/* Clear all trunk masks. */
|
||||
for (i = 0; i < 8; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
|
||||
|
||||
/*
|
||||
* Clear all trunk mappings.
|
||||
*/
|
||||
/* Clear all trunk mappings. */
|
||||
for (i = 0; i < 16; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
|
||||
|
||||
/*
|
||||
* Disable ingress rate limiting by resetting all ingress
|
||||
/* Disable ingress rate limiting by resetting all ingress
|
||||
* rate limit registers to their initial state.
|
||||
*/
|
||||
for (i = 0; i < 6; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
|
||||
|
||||
/*
|
||||
* Initialise cross-chip port VLAN table to reset defaults.
|
||||
*/
|
||||
/* Initialise cross-chip port VLAN table to reset defaults. */
|
||||
REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
|
||||
|
||||
/*
|
||||
* Clear the priority override table.
|
||||
*/
|
||||
/* Clear the priority override table. */
|
||||
for (i = 0; i < 16; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
|
||||
|
||||
|
@ -199,8 +171,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
|
|||
int addr = REG_PORT(p);
|
||||
u16 val;
|
||||
|
||||
/*
|
||||
* MAC Forcing register: don't force link, speed, duplex
|
||||
/* MAC Forcing register: don't force link, speed, duplex
|
||||
* or flow control state to any particular values on physical
|
||||
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
|
||||
* full duplex.
|
||||
|
@ -210,15 +181,13 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
|
|||
else
|
||||
REG_WRITE(addr, 0x01, 0x0003);
|
||||
|
||||
/*
|
||||
* Do not limit the period of time that this port can be
|
||||
/* Do not limit the period of time that this port can be
|
||||
* paused for by the remote end or the period of time that
|
||||
* this port can pause the remote end.
|
||||
*/
|
||||
REG_WRITE(addr, 0x02, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
|
||||
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
|
||||
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
|
||||
* tunneling, determine priority by looking at 802.1p and IP
|
||||
* priority fields (IP prio has precedence), and set STP state
|
||||
|
@ -245,14 +214,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
|
|||
val |= 0x000c;
|
||||
REG_WRITE(addr, 0x04, val);
|
||||
|
||||
/*
|
||||
* Port Control 1: disable trunking. Also, if this is the
|
||||
/* Port Control 1: disable trunking. Also, if this is the
|
||||
* CPU port, enable learn messages to be sent to this port.
|
||||
*/
|
||||
REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
|
||||
|
||||
/*
|
||||
* Port based VLAN map: give each port its own address
|
||||
/* Port based VLAN map: give each port its own address
|
||||
* database, allow the CPU port to talk to each of the 'real'
|
||||
* ports, and allow each of the 'real' ports to only talk to
|
||||
* the upstream port.
|
||||
|
@ -264,14 +231,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
|
|||
val |= 1 << dsa_upstream_port(ds);
|
||||
REG_WRITE(addr, 0x06, val);
|
||||
|
||||
/*
|
||||
* Default VLAN ID and priority: don't set a default VLAN
|
||||
/* Default VLAN ID and priority: don't set a default VLAN
|
||||
* ID, and set the default packet priority to zero.
|
||||
*/
|
||||
REG_WRITE(addr, 0x07, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Control 2: don't force a good FCS, set the maximum
|
||||
/* Port Control 2: don't force a good FCS, set the maximum
|
||||
* frame size to 10240 bytes, don't let the switch add or
|
||||
* strip 802.1q tags, don't discard tagged or untagged frames
|
||||
* on this port, do a destination address lookup on all
|
||||
|
@ -281,48 +246,36 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
|
|||
*/
|
||||
REG_WRITE(addr, 0x08, 0x2080);
|
||||
|
||||
/*
|
||||
* Egress rate control: disable egress rate control.
|
||||
*/
|
||||
/* Egress rate control: disable egress rate control. */
|
||||
REG_WRITE(addr, 0x09, 0x0001);
|
||||
|
||||
/*
|
||||
* Egress rate control 2: disable egress rate control.
|
||||
*/
|
||||
/* Egress rate control 2: disable egress rate control. */
|
||||
REG_WRITE(addr, 0x0a, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Association Vector: when learning source addresses
|
||||
/* Port Association Vector: when learning source addresses
|
||||
* of packets, add the address to the address database using
|
||||
* a port bitmap that has only the bit for this port set and
|
||||
* the other bits clear.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0b, 1 << p);
|
||||
|
||||
/*
|
||||
* Port ATU control: disable limiting the number of address
|
||||
/* Port ATU control: disable limiting the number of address
|
||||
* database entries that this port is allowed to use.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0c, 0x0000);
|
||||
|
||||
/*
|
||||
* Priorit Override: disable DA, SA and VTU priority override.
|
||||
*/
|
||||
/* Priority Override: disable DA, SA and VTU priority override. */
|
||||
REG_WRITE(addr, 0x0d, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Ethertype: use the Ethertype DSA Ethertype value.
|
||||
*/
|
||||
/* Port Ethertype: use the Ethertype DSA Ethertype value. */
|
||||
REG_WRITE(addr, 0x0f, ETH_P_EDSA);
|
||||
|
||||
/*
|
||||
* Tag Remap: use an identity 802.1p prio -> switch prio
|
||||
/* Tag Remap: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x18, 0x3210);
|
||||
|
||||
/*
|
||||
* Tag Remap 2: use an identity 802.1p prio -> switch prio
|
||||
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x19, 0x7654);
|
||||
|
|
|
@ -15,9 +15,7 @@
|
|||
#include <net/dsa.h>
|
||||
#include "mv88e6xxx.h"
|
||||
|
||||
/*
|
||||
* Switch product IDs
|
||||
*/
|
||||
/* Switch product IDs */
|
||||
#define ID_6085 0x04a0
|
||||
#define ID_6095 0x0950
|
||||
#define ID_6131 0x1060
|
||||
|
@ -45,27 +43,19 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
|
|||
int i;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set all ports to the disabled state.
|
||||
*/
|
||||
/* Set all ports to the disabled state. */
|
||||
for (i = 0; i < 11; i++) {
|
||||
ret = REG_READ(REG_PORT(i), 0x04);
|
||||
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||||
}
|
||||
|
||||
/*
|
||||
* Wait for transmit queues to drain.
|
||||
*/
|
||||
/* Wait for transmit queues to drain. */
|
||||
msleep(2);
|
||||
|
||||
/*
|
||||
* Reset the switch.
|
||||
*/
|
||||
/* Reset the switch. */
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
|
||||
|
||||
/*
|
||||
* Wait up to one second for reset to complete.
|
||||
*/
|
||||
/* Wait up to one second for reset to complete. */
|
||||
for (i = 0; i < 1000; i++) {
|
||||
ret = REG_READ(REG_GLOBAL, 0x00);
|
||||
if ((ret & 0xc800) == 0xc800)
|
||||
|
@ -84,42 +74,34 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
|
|||
int ret;
|
||||
int i;
|
||||
|
||||
/*
|
||||
* Enable the PHY polling unit, don't discard packets with
|
||||
/* Enable the PHY polling unit, don't discard packets with
|
||||
* excessive collisions, use a weighted fair queueing scheme
|
||||
* to arbitrate between packet queues, set the maximum frame
|
||||
* size to 1632, and mask all interrupt sources.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
|
||||
|
||||
/*
|
||||
* Set the default address aging time to 5 minutes, and
|
||||
/* Set the default address aging time to 5 minutes, and
|
||||
* enable address learn messages to be sent to all message
|
||||
* ports.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
|
||||
|
||||
/*
|
||||
* Configure the priority mapping registers.
|
||||
*/
|
||||
/* Configure the priority mapping registers. */
|
||||
ret = mv88e6xxx_config_prio(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Set the VLAN ethertype to 0x8100.
|
||||
*/
|
||||
/* Set the VLAN ethertype to 0x8100. */
|
||||
REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
|
||||
|
||||
/*
|
||||
* Disable ARP mirroring, and configure the upstream port as
|
||||
/* Disable ARP mirroring, and configure the upstream port as
|
||||
* the port to which ingress and egress monitor frames are to
|
||||
* be sent.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
|
||||
|
||||
/*
|
||||
* Disable cascade port functionality unless this device
|
||||
/* Disable cascade port functionality unless this device
|
||||
* is used in a cascade configuration, and set the switch's
|
||||
* DSA device number.
|
||||
*/
|
||||
|
@ -128,23 +110,19 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
|
|||
else
|
||||
REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
|
||||
|
||||
/*
|
||||
* Send all frames with destination addresses matching
|
||||
/* Send all frames with destination addresses matching
|
||||
* 01:80:c2:00:00:0x to the CPU port.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
|
||||
|
||||
/*
|
||||
* Ignore removed tag data on doubly tagged packets, disable
|
||||
/* Ignore removed tag data on doubly tagged packets, disable
|
||||
* flow control messages, force flow control priority to the
|
||||
* highest, and send all special multicast frames to the CPU
|
||||
* port at the highest priority.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
|
||||
|
||||
/*
|
||||
* Program the DSA routing table.
|
||||
*/
|
||||
/* Program the DSA routing table. */
|
||||
for (i = 0; i < 32; i++) {
|
||||
int nexthop;
|
||||
|
||||
|
@ -155,20 +133,15 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
|
|||
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
|
||||
}
|
||||
|
||||
/*
|
||||
* Clear all trunk masks.
|
||||
*/
|
||||
/* Clear all trunk masks. */
|
||||
for (i = 0; i < 8; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
|
||||
|
||||
/*
|
||||
* Clear all trunk mappings.
|
||||
*/
|
||||
/* Clear all trunk mappings. */
|
||||
for (i = 0; i < 16; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
|
||||
|
||||
/*
|
||||
* Force the priority of IGMP/MLD snoop frames and ARP frames
|
||||
/* Force the priority of IGMP/MLD snoop frames and ARP frames
|
||||
* to the highest setting.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
|
||||
|
@ -182,8 +155,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
int addr = REG_PORT(p);
|
||||
u16 val;
|
||||
|
||||
/*
|
||||
* MAC Forcing register: don't force link, speed, duplex
|
||||
/* MAC Forcing register: don't force link, speed, duplex
|
||||
* or flow control state to any particular values on physical
|
||||
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
|
||||
* (100 Mb/s on 6085) full duplex.
|
||||
|
@ -196,8 +168,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
else
|
||||
REG_WRITE(addr, 0x01, 0x0003);
|
||||
|
||||
/*
|
||||
* Port Control: disable Core Tag, disable Drop-on-Lock,
|
||||
/* Port Control: disable Core Tag, disable Drop-on-Lock,
|
||||
* transmit frames unmodified, disable Header mode,
|
||||
* enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
|
||||
* tunneling, determine priority by looking at 802.1p and
|
||||
|
@ -214,8 +185,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
val = 0x0433;
|
||||
if (p == dsa_upstream_port(ds)) {
|
||||
val |= 0x0104;
|
||||
/*
|
||||
* On 6085, unknown multicast forward is controlled
|
||||
/* On 6085, unknown multicast forward is controlled
|
||||
* here rather than in Port Control 2 register.
|
||||
*/
|
||||
if (ps->id == ID_6085)
|
||||
|
@ -225,14 +195,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
val |= 0x0100;
|
||||
REG_WRITE(addr, 0x04, val);
|
||||
|
||||
/*
|
||||
* Port Control 1: disable trunking. Also, if this is the
|
||||
/* Port Control 1: disable trunking. Also, if this is the
|
||||
* CPU port, enable learn messages to be sent to this port.
|
||||
*/
|
||||
REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
|
||||
|
||||
/*
|
||||
* Port based VLAN map: give each port its own address
|
||||
/* Port based VLAN map: give each port its own address
|
||||
* database, allow the CPU port to talk to each of the 'real'
|
||||
* ports, and allow each of the 'real' ports to only talk to
|
||||
* the upstream port.
|
||||
|
@ -244,14 +212,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
val |= 1 << dsa_upstream_port(ds);
|
||||
REG_WRITE(addr, 0x06, val);
|
||||
|
||||
/*
|
||||
* Default VLAN ID and priority: don't set a default VLAN
|
||||
/* Default VLAN ID and priority: don't set a default VLAN
|
||||
* ID, and set the default packet priority to zero.
|
||||
*/
|
||||
REG_WRITE(addr, 0x07, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Control 2: don't force a good FCS, don't use
|
||||
/* Port Control 2: don't force a good FCS, don't use
|
||||
* VLAN-based, source address-based or destination
|
||||
* address-based priority overrides, don't let the switch
|
||||
* add or strip 802.1q tags, don't discard tagged or
|
||||
|
@ -264,8 +230,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
* forwarding of unknown multicast addresses.
|
||||
*/
|
||||
if (ps->id == ID_6085)
|
||||
/*
|
||||
* on 6085, bits 3:0 are reserved, bit 6 control ARP
|
||||
/* on 6085, bits 3:0 are reserved, bit 6 control ARP
|
||||
* mirroring, and multicast forward is handled in
|
||||
* Port Control register.
|
||||
*/
|
||||
|
@ -277,32 +242,25 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
|
|||
REG_WRITE(addr, 0x08, val);
|
||||
}
|
||||
|
||||
/*
|
||||
* Rate Control: disable ingress rate limiting.
|
||||
*/
|
||||
/* Rate Control: disable ingress rate limiting. */
|
||||
REG_WRITE(addr, 0x09, 0x0000);
|
||||
|
||||
/*
|
||||
* Rate Control 2: disable egress rate limiting.
|
||||
*/
|
||||
/* Rate Control 2: disable egress rate limiting. */
|
||||
REG_WRITE(addr, 0x0a, 0x0000);
|
||||
|
||||
/*
|
||||
* Port Association Vector: when learning source addresses
|
||||
/* Port Association Vector: when learning source addresses
|
||||
* of packets, add the address to the address database using
|
||||
* a port bitmap that has only the bit for this port set and
|
||||
* the other bits clear.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0b, 1 << p);
|
||||
|
||||
/*
|
||||
* Tag Remap: use an identity 802.1p prio -> switch prio
|
||||
/* Tag Remap: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x18, 0x3210);
|
||||
|
||||
/*
|
||||
* Tag Remap 2: use an identity 802.1p prio -> switch prio
|
||||
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x19, 0x7654);
|
||||
|
|
|
@ -15,8 +15,7 @@
|
|||
#include <net/dsa.h>
|
||||
#include "mv88e6xxx.h"
|
||||
|
||||
/*
|
||||
* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
|
||||
/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
|
||||
* use all 32 SMI bus addresses on its SMI bus, and all switch registers
|
||||
* will be directly accessible on some {device address,register address}
|
||||
* pair. If the ADDR[4:0] pins are not strapped to zero, the switch
|
||||
|
@ -48,30 +47,22 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
|
|||
if (sw_addr == 0)
|
||||
return mdiobus_read(bus, addr, reg);
|
||||
|
||||
/*
|
||||
* Wait for the bus to become free.
|
||||
*/
|
||||
/* Wait for the bus to become free. */
|
||||
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Transmit the read command.
|
||||
*/
|
||||
/* Transmit the read command. */
|
||||
ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Wait for the read command to complete.
|
||||
*/
|
||||
/* Wait for the read command to complete. */
|
||||
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Read the data.
|
||||
*/
|
||||
/* Read the data. */
|
||||
ret = mdiobus_read(bus, sw_addr, 1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
@ -100,30 +91,22 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
|
|||
if (sw_addr == 0)
|
||||
return mdiobus_write(bus, addr, reg, val);
|
||||
|
||||
/*
|
||||
* Wait for the bus to become free.
|
||||
*/
|
||||
/* Wait for the bus to become free. */
|
||||
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Transmit the data to write.
|
||||
*/
|
||||
/* Transmit the data to write. */
|
||||
ret = mdiobus_write(bus, sw_addr, 1, val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Transmit the write command.
|
||||
*/
|
||||
/* Transmit the write command. */
|
||||
ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Wait for the write command to complete.
|
||||
*/
|
||||
/* Wait for the write command to complete. */
|
||||
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
@ -146,9 +129,7 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
|
|||
|
||||
int mv88e6xxx_config_prio(struct dsa_switch *ds)
|
||||
{
|
||||
/*
|
||||
* Configure the IP ToS mapping registers.
|
||||
*/
|
||||
/* Configure the IP ToS mapping registers. */
|
||||
REG_WRITE(REG_GLOBAL, 0x10, 0x0000);
|
||||
REG_WRITE(REG_GLOBAL, 0x11, 0x0000);
|
||||
REG_WRITE(REG_GLOBAL, 0x12, 0x5555);
|
||||
|
@ -158,9 +139,7 @@ int mv88e6xxx_config_prio(struct dsa_switch *ds)
|
|||
REG_WRITE(REG_GLOBAL, 0x16, 0xffff);
|
||||
REG_WRITE(REG_GLOBAL, 0x17, 0xffff);
|
||||
|
||||
/*
|
||||
* Configure the IEEE 802.1p priority mapping register.
|
||||
*/
|
||||
/* Configure the IEEE 802.1p priority mapping register. */
|
||||
REG_WRITE(REG_GLOBAL, 0x18, 0xfa41);
|
||||
|
||||
return 0;
|
||||
|
@ -183,14 +162,10 @@ int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
|
|||
for (i = 0; i < 6; i++) {
|
||||
int j;
|
||||
|
||||
/*
|
||||
* Write the MAC address byte.
|
||||
*/
|
||||
/* Write the MAC address byte. */
|
||||
REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]);
|
||||
|
||||
/*
|
||||
* Wait for the write to complete.
|
||||
*/
|
||||
/* Wait for the write to complete. */
|
||||
for (j = 0; j < 16; j++) {
|
||||
ret = REG_READ(REG_GLOBAL2, 0x0d);
|
||||
if ((ret & 0x8000) == 0)
|
||||
|
@ -282,8 +257,7 @@ static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
|
|||
|
||||
mutex_lock(&ps->ppu_mutex);
|
||||
|
||||
/*
|
||||
* If the PHY polling unit is enabled, disable it so that
|
||||
/* If the PHY polling unit is enabled, disable it so that
|
||||
* we can access the PHY registers. If it was already
|
||||
* disabled, cancel the timer that is going to re-enable
|
||||
* it.
|
||||
|
@ -307,9 +281,7 @@ static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
|
|||
{
|
||||
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
||||
|
||||
/*
|
||||
* Schedule a timer to re-enable the PHY polling unit.
|
||||
*/
|
||||
/* Schedule a timer to re-enable the PHY polling unit. */
|
||||
mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
|
||||
mutex_unlock(&ps->ppu_mutex);
|
||||
}
|
||||
|
@ -431,14 +403,10 @@ static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
|
|||
{
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Snapshot the hardware statistics counters for this port.
|
||||
*/
|
||||
/* Snapshot the hardware statistics counters for this port. */
|
||||
REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port);
|
||||
|
||||
/*
|
||||
* Wait for the snapshotting to complete.
|
||||
*/
|
||||
/* Wait for the snapshotting to complete. */
|
||||
ret = mv88e6xxx_stats_wait(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
@ -502,9 +470,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
|
|||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Read each of the counters.
|
||||
*/
|
||||
/* Read each of the counters. */
|
||||
for (i = 0; i < nr_stats; i++) {
|
||||
struct mv88e6xxx_hw_stat *s = stats + i;
|
||||
u32 low;
|
||||
|
|
|
@ -16,16 +16,14 @@
|
|||
#define REG_GLOBAL2 0x1c
|
||||
|
||||
struct mv88e6xxx_priv_state {
|
||||
/*
|
||||
* When using multi-chip addressing, this mutex protects
|
||||
/* When using multi-chip addressing, this mutex protects
|
||||
* access to the indirect access registers. (In single-chip
|
||||
* mode, this mutex is effectively useless.)
|
||||
*/
|
||||
struct mutex smi_mutex;
|
||||
|
||||
#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
|
||||
/*
|
||||
* Handles automatic disabling and re-enabling of the PHY
|
||||
/* Handles automatic disabling and re-enabling of the PHY
|
||||
* polling unit.
|
||||
*/
|
||||
struct mutex ppu_mutex;
|
||||
|
@ -34,8 +32,7 @@ struct mv88e6xxx_priv_state {
|
|||
struct timer_list ppu_timer;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This mutex serialises access to the statistics unit.
|
||||
/* This mutex serialises access to the statistics unit.
|
||||
* Hold this mutex over snapshot + dump sequences.
|
||||
*/
|
||||
struct mutex stats_mutex;
|
||||
|
|
Loading…
Reference in a new issue