mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
doc: devicetree: Fix various typos
Fix spelling typos in Documentation/devicetree/bindings. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
parent
4cf0cec21e
commit
372c1d6d64
8 changed files with 8 additions and 8 deletions
|
@ -26,7 +26,7 @@ Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
|
|||
- pinctrl-names: Should contain only one value - "default".
|
||||
|
||||
Optional properties:
|
||||
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
|
||||
- samsung,i2c-slave-addr: Slave address in multi-master environment. If not
|
||||
specified, default value is 0.
|
||||
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
|
||||
specified, the default value in Hz is 100000.
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
LEDs conected to tca6507
|
||||
LEDs connected to tca6507
|
||||
|
||||
Required properties:
|
||||
- compatible : should be : "ti,tca6507".
|
||||
|
|
|
@ -12,7 +12,7 @@ Required properties:
|
|||
handle 32 interrupt sources).
|
||||
|
||||
- interrupt-controller: The presence of this property identifies the node
|
||||
as an interupt controller. No property value shall be defined.
|
||||
as an interrupt controller. No property value shall be defined.
|
||||
|
||||
- #interrupt-cells: Specifies the number of cells needed to encode an
|
||||
interrupt source. The type shall be a <u32> and the value shall be 2.
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
* Atmel AT91 Pinmux Controller
|
||||
|
||||
The AT91 Pinmux Controler, enables the IC
|
||||
The AT91 Pinmux Controller, enables the IC
|
||||
to share one PAD to several functional blocks. The sharing is done by
|
||||
multiplexing the PAD input/output signals. For each PAD there are up to
|
||||
8 muxing options (called periph modes). Since different modules require
|
||||
|
|
|
@ -5,7 +5,7 @@ controller, and pinmux/control device.
|
|||
|
||||
Required properties:
|
||||
- compatible: "brcm,bcm2835-gpio"
|
||||
- reg: Should contain the physical address of the GPIO module's registes.
|
||||
- reg: Should contain the physical address of the GPIO module's registers.
|
||||
- gpio-controller: Marks the device node as a GPIO controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||||
second cell is used to specify optional parameters:
|
||||
|
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
QNAP NAS devices have a microcontroller controlling the main power
|
||||
supply. This microcontroller is connected to UART1 of the Kirkwood and
|
||||
Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
|
||||
Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
|
||||
microcontroller to turn the power off. This driver adds a handler to
|
||||
pm_power_off which is called to turn the power off.
|
||||
|
||||
|
|
|
@ -28,7 +28,7 @@ Required properties:
|
|||
safe operating voltage).
|
||||
|
||||
If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
|
||||
property is specified, then all the eigth voltage values for the
|
||||
property is specified, then all the eight voltage values for the
|
||||
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
|
||||
|
||||
Optional properties:
|
||||
|
|
|
@ -4,7 +4,7 @@ The Samsung's phy transceiver is used for controlling usb phy for
|
|||
s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
|
||||
across Samsung SOCs.
|
||||
TODO: Adding the PHY binding with controller(s) according to the under
|
||||
developement generic PHY driver.
|
||||
development generic PHY driver.
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
Loading…
Reference in a new issue