ARM: kirkwood: convert the mv88f6281gtw_ge board to DT

This commit converts the mv88f6281gtw_ge Kirkwood board to use a
Device Tree representation, except for the Ethernet devices and the
DSA switch. Even though the mv643xx_eth driver has a DT binding,
converting this board to use it is for now left on the side because it
doesn't use a simple PHY, but a DSA switch instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Thomas Petazzoni 2013-08-01 17:07:32 +02:00 committed by Jason Cooper
parent 0230bd441e
commit 37ae08c939
8 changed files with 193 additions and 180 deletions

View File

@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \

View File

@ -0,0 +1,125 @@
/*
* Marvell 88F6281 GTW GE Board
*
* Lennert Buytenhek <buytenh@marvell.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This file contains the definitions that are common between the 6281
* and 6282 variants of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "Marvell 88F6281 GTW GE Board";
compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl@10000 {
pmx_usb_led: pmx-usb-led {
marvell,pins = "mpp12";
marvell,function = "gpo";
};
pmx_leds: pmx-leds {
marvell,pins = "mpp20", "mpp21";
marvell,function = "gpio";
};
pmx_keys: pmx-keys {
marvell,pins = "mpp46", "mpp47";
marvell,function = "gpio";
};
};
spi@10600 {
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
clock-frequency = <200000000>;
status = "ok";
};
ehci@50000 {
status = "okay";
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds &pmx_usb_led>;
pinctrl-names = "default";
green-status {
label = "gtw:green:Status";
gpios = <&gpio0 20 0>;
};
red-status {
label = "gtw:red:Status";
gpios = <&gpio0 21 0>;
};
green-usb {
label = "gtw:green:USB";
gpios = <&gpio0 12 0>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
button@1 {
label = "SWR Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio1 15 1>;
};
button@2 {
label = "WPS Button";
linux,code = <0x211>; /* KEY_WPS_BUTTON */
gpios = <&gpio1 14 1>;
};
};
};

View File

@ -12,13 +12,6 @@ config MACH_D2NET_V2
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
select KIRKWOOD_LEGACY
@ -120,6 +113,13 @@ config MACH_DLINK_KIRKWOOD_DT
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
config MACH_MV88F6281GTW_GE_DT
bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board (Flattened Device Tree).
endmenu
endif

View File

@ -1,7 +1,6 @@
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
@ -13,3 +12,4 @@ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o

View File

@ -109,6 +109,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
mv88f6281gtw_ge_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}

View File

@ -0,0 +1,50 @@
/*
* arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
*
* Marvell 88F6281 GTW GE Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/gpio.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[4] = "wan",
.port_names[5] = "cpu",
};
static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &mv88f6281gtw_ge_switch_chip_data,
};
void __init mv88f6281gtw_ge_init(void)
{
kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
}

View File

@ -65,6 +65,12 @@ void dnskw_init(void);
static inline void dnskw_init(void) {};
#endif
#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
void mv88f6281gtw_ge_init(void);
#else
static inline void mv88f6281gtw_ge_init(void) {};
#endif
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);

View File

@ -1,172 +0,0 @@
/*
* arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
*
* Marvell 88F6281 GTW GE Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[4] = "wan",
.port_names[5] = "cpu",
};
static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &mv88f6281gtw_ge_switch_chip_data,
};
static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
.type = "mx25l12805d",
};
static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &mv88f6281gtw_ge_spi_slave_data,
.irq = -1,
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 0,
},
};
static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
{
.code = KEY_RESTART,
.gpio = 47,
.desc = "SWR Button",
.active_low = 1,
}, {
.code = KEY_WPS_BUTTON,
.gpio = 46,
.desc = "WPS Button",
.active_low = 1,
},
};
static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
.buttons = mv88f6281gtw_ge_button_pins,
.nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
};
static struct platform_device mv88f6281gtw_ge_buttons = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &mv88f6281gtw_ge_button_data,
},
};
static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
{
.name = "gtw:green:Status",
.gpio = 20,
.active_low = 0,
}, {
.name = "gtw:red:Status",
.gpio = 21,
.active_low = 0,
}, {
.name = "gtw:green:USB",
.gpio = 12,
.active_low = 0,
},
};
static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
.leds = mv88f6281gtw_ge_led_pins,
.num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
};
static struct platform_device mv88f6281gtw_ge_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mv88f6281gtw_ge_led_data,
},
};
static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
MPP12_GPO, /* Status#_USB pin */
MPP20_GPIO, /* Status#_GLED pin */
MPP21_GPIO, /* Status#_RLED pin */
MPP46_GPIO, /* WPS_Switch pin */
MPP47_GPIO, /* SW_Init pin */
0
};
static void __init mv88f6281gtw_ge_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
kirkwood_spi_init();
kirkwood_uart0_init();
platform_device_register(&mv88f6281gtw_ge_leds);
platform_device_register(&mv88f6281gtw_ge_buttons);
}
static int __init mv88f6281gtw_ge_pci_init(void)
{
if (machine_is_mv88f6281gtw_ge())
kirkwood_pcie_init(KW_PCIE0);
return 0;
}
subsys_initcall(mv88f6281gtw_ge_pci_init);
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END