dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer

The overflow error flag (ROI: Request Overflow Error) is only relevant
for the case when the channel handles a peripheral synchronized transfer.
Not in the case of memory to memory transfer where there is no hardware
request signal.

Remove the use of this interrupt source in such a case. It's based on
the first descriptor which holds the configuration for the whole
linked list transfer.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Nicolas Ferre 2019-04-03 12:23:59 +02:00 committed by Vinod Koul
parent 223a4f4cfe
commit 38a829a389
1 changed files with 12 additions and 1 deletions

View File

@ -308,6 +308,11 @@ static inline int at_xdmac_csize(u32 maxburst)
return csize;
};
static inline bool at_xdmac_chan_is_peripheral_xfer(u32 cfg)
{
return cfg & AT_XDMAC_CC_TYPE_PER_TRAN;
}
static inline u8 at_xdmac_get_dwidth(u32 cfg)
{
return (cfg & AT_XDMAC_CC_DWIDTH_MASK) >> AT_XDMAC_CC_DWIDTH_OFFSET;
@ -389,7 +394,13 @@ static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan,
at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
at_xdmac_chan_write(atchan, AT_XDMAC_CID, 0xffffffff);
reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE | AT_XDMAC_CIE_ROIE;
reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE;
/*
* Request Overflow Error is only for peripheral synchronized transfers
*/
if (at_xdmac_chan_is_peripheral_xfer(first->lld.mbr_cfg))
reg |= AT_XDMAC_CIE_ROIE;
/*
* There is no end of list when doing cyclic dma, we need to get
* an interrupt after each periods.