mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-30 06:10:56 +00:00
arm64: dts: rockchip: Add Indiedroid Nova board
The Indiedroid Nova is an SBC from a sub-brand of Ameridroid that includes the following hardware: - A 40-pin GPIO header - 2 USB-A 3.0 ports - 2 USB-A 2.0 ports - A USB-C 2.0 OTG port (used for USB power delivery) - A USB-C 3.0 port that can do display port output. - A Micro HDMI 2.1 port. - A 1GB ethernet port. - An RT8821CS based WiFi/Bluetooth module. - A user replaceable eMMC module. - An SDMMC card slot. - A MIPI DSI connector. - A MIPI CSI connector. - A 3.5mm TRRS audio jack with microphone input. - An 2 pin socket for an RTC battery. - A 4 pin socket for a debug port. - A power button (connected to PMIC), a reset button (connected to SoC reset), a boot button, and a recovery button (both connected to the ADC). - 4GB, 8GB, or 16GB of system RAM. This initial devicetree includes support for the WiFi, bluetooth, analog audio out/in, SDMMC, eMMC, RTC, UART debugging, and has the regulator values from the schematics. ADC, graphics output, GPU, USB, and wired ethernet are still pending additional upstream changes. Analog audio will require changes to handle a difference between the requested clock frequency of 12288000 and the actual clock freqency of 12287999 before it will work properly. This will be done in a subsequent patch series. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20230531161220.280744-6-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Chris Morgan
Heiko Stuebner
parent
81154abafb
commit
3900160e16
2 changed files with 764 additions and 0 deletions
|
|
@ -99,5 +99,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
|
||||
|
|
|
|||
763
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
Normal file
763
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
Normal file
|
|
@ -0,0 +1,763 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Indiedroid Nova";
|
||||
compatible = "indiedroid,nova", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clock-names = "ext_clock";
|
||||
clocks = <&rtc_hym8563>;
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rockchip,es8388-codec";
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
routing = "LINPUT2", "Mic Jack",
|
||||
"Headphones", "LOUT1",
|
||||
"Headphones", "ROUT1";
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */
|
||||
vcc_3v3_s0: vcc-3v3-s0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_sys";
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usb";
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usbdcin";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Add labels for each GPIO pin exposed on the 40 pin header. Note that
|
||||
* voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
|
||||
* label).
|
||||
*/
|
||||
&gpio0 {
|
||||
gpio-line-names = /* GPIO0 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 D0-D7 */
|
||||
"HEADER_12_1v8", "", "", "HEADER_24_1v8",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names = /* GPIO1 A0-A7 */
|
||||
"HEADER_27_3v3", "HEADER_28_3v3", "", "",
|
||||
"HEADER_29_1v8", "", "HEADER_7_1v8", "",
|
||||
/* GPIO1 B0-B7 */
|
||||
"", "HEADER_31_1v8", "HEADER_33_1v8", "",
|
||||
"HEADER_11_1v8", "HEADER_13_1v8", "", "",
|
||||
/* GPIO1 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "HEADER_5_3v3", "HEADER_3_3v3";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names = /* GPIO3 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO3 B0-B7 */
|
||||
"HEADER_16_1v8", "HEADER_18_1v8", "", "",
|
||||
"", "", "", "HEADER_19_1v8",
|
||||
/* GPIO3 C0-C7 */
|
||||
"HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8",
|
||||
"HEADER_15_1v8", "HEADER_22_1v8", "", "",
|
||||
/* GPIO3 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names = /* GPIO4 A0-A7 */
|
||||
"", "", "HEADER_37_3v3", "HEADER_32_3v3",
|
||||
"HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
|
||||
/* GPIO4 B0-B7 */
|
||||
"", "", "", "HEADER_40_3v3",
|
||||
"HEADER_8_3v3", "HEADER_10_3v3", "", "",
|
||||
/* GPIO4 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO4 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-0 = <&i2c6m3_xfer>;
|
||||
status = "okay";
|
||||
|
||||
fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
||||
op-sink-microwatt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc_hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
pinctrl-0 = <&i2c7m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388";
|
||||
reg = <0x11>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
AVDD-supply = <&vcc_3v3_s3>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
DVDD-supply = <&vcc_1v8_s3>;
|
||||
HPVDD-supply = <&vcc_3v3_s3>;
|
||||
PVDD-supply = <&vcc_1v8_s3>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8388_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8388_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth-pins {
|
||||
bt_reset: bt-reset {
|
||||
rockchip,pins =
|
||||
<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_dev: bt-wake-dev {
|
||||
rockchip,pins =
|
||||
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins =
|
||||
<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins =
|
||||
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* HS400 modes seemed to cause io errors. */
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-mmc-hs400;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <100000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
#address-cells = <1>;
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
|
||||
pinctrl-names = "default";
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
pinctrl-names = "default";
|
||||
spi-max-frequency = <1000000>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-name = "vdd_logic_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <600000>;
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-name = "vdda_1v2_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcca_3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3_pldo6: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3_pldo6";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-name = "vdda_ddr_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdda_0v85_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
/* Schematics show not in use */
|
||||
nldo-reg5 {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* DMA seems to interfere with bluetooth device normal operation. */
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
|
||||
pinctrl-names = "default";
|
||||
/delete-property/ dma-names;
|
||||
/delete-property/ dmas;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8821cs-bt",
|
||||
"realtek,rtl8723bs-bt";
|
||||
device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
Loading…
Reference in a new issue