ASoC: jive: Automatically disconnect non-connected pins

All DAPM input and output pins of the wm8750 are either used in the card's
DAPM routing table or are marked as not connected.

Set the fully_routed flag of the card instead of manually marking the unused
inputs and outputs as not connected. This makes the code a bit shorter and
cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Lars-Peter Clausen 2015-01-16 14:34:52 +01:00 committed by Mark Brown
parent 5d6bdfd568
commit 3a41e0f723

View file

@ -83,22 +83,6 @@ static struct snd_soc_ops jive_ops = {
.hw_params = jive_hw_params,
};
static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
/* These endpoints are not being used. */
snd_soc_dapm_nc_pin(dapm, "LINPUT2");
snd_soc_dapm_nc_pin(dapm, "RINPUT2");
snd_soc_dapm_nc_pin(dapm, "LINPUT3");
snd_soc_dapm_nc_pin(dapm, "RINPUT3");
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "MONO");
return 0;
}
static struct snd_soc_dai_link jive_dai = {
.name = "wm8750",
.stream_name = "WM8750",
@ -106,7 +90,6 @@ static struct snd_soc_dai_link jive_dai = {
.codec_dai_name = "wm8750-hifi",
.platform_name = "s3c2412-i2s",
.codec_name = "wm8750.0-001a",
.init = jive_wm8750_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &jive_ops,
@ -123,6 +106,7 @@ static struct snd_soc_card snd_soc_machine_jive = {
.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
.fully_routed = true,
};
static struct platform_device *jive_snd_device;