sh: heartbeat consolidation for banked LEDs.

This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2007-02-13 15:42:28 +09:00
parent c7666e72cf
commit 3b4d953962
32 changed files with 260 additions and 571 deletions

View File

@ -512,7 +512,8 @@ config HEARTBEAT
bool "Heartbeat LED"
depends on SH_MPC1211 || SH_SH03 || \
SH_BIGSUR || SOLUTION_ENGINE || \
SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
SH_R7780RP
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is

View File

@ -2,7 +2,7 @@
# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
#
obj-y := setup.o rtc.o led.o
obj-y := setup.o rtc.o
obj-$(CONFIG_PCI) += pci.o

View File

@ -1,63 +0,0 @@
/*
* linux/arch/sh/boards/mpc1211/led.c
*
* Copyright (C) 2001 Saito.K & Jeanne
*
* This file contains Interface MPC-1211 specific LED code.
*/
static void mach_led(int position, int value)
{
volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
if (value) {
*p |= 1;
} else {
*p &= ~1;
}
}
#ifdef CONFIG_HEARTBEAT
#include <linux/sched.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_mpc1211(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ( (300<<FSHIFT)/
((avenrun[0]/5) + (3<<FSHIFT)) );
if (up) {
if (bit == 7) {
bit--;
up=0;
} else {
bit ++;
}
} else {
if (bit == 0) {
bit++;
up=1;
} else {
bit--;
}
}
*p = 1<<bit;
}
#endif /* CONFIG_HEARTBEAT */

View File

@ -10,6 +10,7 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no)
return 0;
}
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa2000000,
.end = 0xa2000000 + 8 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *mpc1211_devices[] __initdata = {
&heartbeat_device,
};
static int __init mpc1211_devices_setup(void)
{
return platform_add_devices(mpc1211_devices,
ARRAY_SIZE(mpc1211_devices));
}
__initcall(mpc1211_devices_setup);
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = {
.mv_nr_irqs = 48,
.mv_irq_demux = mpc1211_irq_demux,
.mv_init_irq = init_mpc1211_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_mpc1211,
#endif
};
ALIAS_MV(mpc1211)

View File

@ -4,5 +4,4 @@
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o
obj-$(CONFIG_PUSH_SWITCH) += psw.o

View File

@ -1,43 +0,0 @@
/*
* Copyright (C) Atom Create Engineering Co., Ltd.
*
* May be copied or modified under the terms of GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
*/
#include <linux/sched.h>
#include <asm/io.h>
#include <asm/r7780rp/r7780rp.h>
/* Cycle the LED's in the clasic Knightriger/Sun pattern */
void heartbeat_r7780rp(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
static unsigned bit = 0, up = 1;
unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
cnt += 1;
if (cnt < period)
return;
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
*/
period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
*p = 1 << bit_pos[bit];
if (up)
if (bit == 7) {
bit--;
up = 0;
} else
bit++;
else if (bit == 0)
up = 1;
else
bit--;
}

View File

@ -17,7 +17,6 @@
#include <asm/clock.h>
#include <asm/io.h>
extern void heartbeat_r7780rp(void);
extern void init_r7780rp_IRQ(void);
static struct resource m66596_usb_host_resources[] = {
@ -72,9 +71,30 @@ static struct platform_device cf_ide_device = {
.resource = cf_ide_resources,
};
static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_OBLED,
.end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *r7780rp_devices[] __initdata = {
&m66596_usb_host_device,
&cf_ide_device,
&heartbeat_device,
};
static int __init r7780rp_devices_setup(void)
@ -185,8 +205,5 @@ struct sh_machine_vector mv_r7780rp __initmv = {
.mv_ioport_map = r7780rp_ioport_map,
.mv_init_irq = init_r7780rp_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_r7780rp,
#endif
};
ALIAS_MV(r7780rp)

View File

@ -3,4 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,44 +0,0 @@
/*
* linux/arch/sh/boards/renesas/rts7751r2d/led.c
*
* Copyright (C) Atom Create Engineering Co., Ltd.
*
* May be copied or modified under the terms of GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Renesas Technology Sales RTS7751R2D specific LED code.
*/
#include <linux/io.h>
#include <linux/sched.h>
#include <asm/rts7751r2d.h>
/* Cycle the LED's in the clasic Knightriger/Sun pattern */
void heartbeat_rts7751r2d(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period)
return;
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
*/
period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
*p = 1 << bit;
if (up)
if (bit == 7) {
bit--;
up = 0;
} else
bit++;
else if (bit == 0)
up = 1;
else
bit--;
}

View File

@ -69,8 +69,24 @@ static struct platform_device uart_device = {
},
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_OUTPORT,
.end = PA_OUTPORT + 8 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
&uart_device,
&heartbeat_device,
};
static int __init rts7751r2d_devices_setup(void)
@ -129,9 +145,6 @@ struct sh_machine_vector mv_rts7751r2d __initmv = {
.mv_outsl = rts7751r2d_outsl,
.mv_init_irq = init_rts7751r2d_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_rts7751r2d,
#endif
.mv_irq_demux = rts7751r2d_irq_demux,
#ifdef CONFIG_USB_SM501

View File

@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,57 +0,0 @@
/*
* linux/arch/sh/kernel/led_se.c
*
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Solution Engine specific LED code.
*/
#include <linux/config.h>
#include <asm/se7206.h>
#ifdef CONFIG_HEARTBEAT
#include <linux/sched.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short* p = (volatile unsigned short*)PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ( (300<<FSHIFT)/
((avenrun[0]/5) + (3<<FSHIFT)) );
if (up) {
if (bit == 7) {
bit--;
up=0;
} else {
bit ++;
}
} else {
if (bit == 0) {
bit++;
up=1;
} else {
bit--;
}
}
*p = 1<<(bit+8);
}
#endif /* CONFIG_HEARTBEAT */

View File

@ -3,6 +3,7 @@
* linux/arch/sh/boards/se/7206/setup.c
*
* Copyright (C) 2006 Yoshinori Sato
* Copyright (C) 2007 Paul Mundt
*
* Hitachi 7206 SolutionEngine Support.
*
@ -34,15 +35,37 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se7206_devices[] __initdata = {
&smc91x_device,
&heartbeat_device,
};
static int __init se7206_devices_setup(void)
{
return platform_device_register(&smc91x_device);
return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
}
__initcall(se7206_devices_setup);
void heartbeat_se(void);
/*
* The Machine Vector
*/
@ -72,8 +95,5 @@ struct sh_machine_vector mv_se __initmv = {
.mv_outsl = se7206_outsl,
.mv_init_irq = init_se7206_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_se,
#endif
};
ALIAS_MV(se)

View File

@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,54 +0,0 @@
/*
* linux/arch/sh/boards/se/7300/led.c
*
* Derived from linux/arch/sh/boards/se/770x/led.c
*
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Solution Engine specific LED code.
*/
#include <linux/sched.h>
#include <asm/se7300.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_7300se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *) PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
if (up) {
if (bit == 7) {
bit--;
up = 0;
} else {
bit++;
}
} else {
if (bit == 0) {
bit++;
up = 1;
} else {
bit--;
}
}
*p = 1 << (bit + 8);
}

View File

@ -6,14 +6,43 @@
* SH-Mobile SolutionEngine 7300 Support.
*
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7300.h>
void heartbeat_7300se(void);
void init_7300se_IRQ(void);
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se7300_devices[] __initdata = {
&heartbeat_device,
};
static int __init se7300_devices_setup(void)
{
return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices));
}
__initcall(se7300_devices_setup);
/*
* The Machine Vector
*/
@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = {
.mv_outsl = sh7300se_outsl,
.mv_init_irq = init_7300se_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_7300se,
#endif
};
ALIAS_MV(7300se)

View File

@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,53 +0,0 @@
/*
* arch/sh/boards/se/73180/led.c
*
* Derived from arch/sh/boards/se/770x/led.c
*
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Solution Engine specific LED code.
*/
#include <linux/sched.h>
#include <asm/mach/se73180.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_73180se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *) PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
if (up) {
if (bit == 7) {
bit--;
up = 0;
} else {
bit++;
}
} else {
if (bit == 0) {
bit++;
up = 1;
} else {
bit--;
}
}
*p = 1 << (bit + LED_SHIFT);
}

View File

@ -10,13 +10,39 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se73180.h>
#include <asm/irq.h>
void heartbeat_73180se(void);
void init_73180se_IRQ(void);
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + 8 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se73180_devices[] __initdata = {
&heartbeat_device,
};
static int __init se73180_devices_setup(void)
{
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));
}
__initcall(se73180_devices_setup);
/*
* The Machine Vector
*/
@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = {
.mv_init_irq = init_73180se_IRQ,
.mv_irq_demux = shmse_irq_demux,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_73180se,
#endif
};
ALIAS_MV(73180se)

View File

@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,44 +0,0 @@
/*
* arch/sh/boards/se/7343/led.c
*
*/
#include <linux/sched.h>
#include <asm/mach/se7343.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_7343se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *) PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
if (up) {
if (bit == 7) {
bit--;
up = 0;
} else {
bit++;
}
} else {
if (bit == 0) {
bit++;
up = 1;
} else {
bit--;
}
}
*p = 1 << (bit + LED_SHIFT);
}

View File

@ -4,7 +4,6 @@
#include <asm/mach/se7343.h>
#include <asm/irq.h>
void heartbeat_7343se(void);
void init_7343se_IRQ(void);
static struct resource smc91x_resources[] = {
@ -31,14 +30,30 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static struct platform_device *smc91x_platform_devices[] __initdata = {
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + 8 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *sh7343se_platform_devices[] __initdata = {
&smc91x_device,
&heartbeat_device,
};
static int __init sh7343se_devices_setup(void)
{
return platform_add_devices(smc91x_platform_devices,
ARRAY_SIZE(smc91x_platform_devices));
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));
}
static void __init sh7343se_setup(char **cmdline_p)
@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = {
.mv_init_irq = init_7343se_IRQ,
.mv_irq_demux = shmse_irq_demux,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_7343se,
#endif
};
ALIAS_MV(7343se)

View File

@ -3,4 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,52 +0,0 @@
/*
* linux/arch/sh/boards/se/770x/led.c
*
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Solution Engine specific LED code.
*/
#include <linux/sched.h>
#include <asm/se.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short* p = (volatile unsigned short*)PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ( (300<<FSHIFT)/
((avenrun[0]/5) + (3<<FSHIFT)) );
if (up) {
if (bit == 7) {
bit--;
up=0;
} else {
bit ++;
}
} else {
if (bit == 0) {
bit++;
up=1;
} else {
bit--;
}
}
*p = 1<<(bit+8);
}

View File

@ -7,12 +7,12 @@
*
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
void heartbeat_se(void);
void init_se_IRQ(void);
/*
@ -63,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p)
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se_devices[] __initdata = {
&heartbeat_device,
};
static int __init se_devices_setup(void)
{
return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
}
__initcall(se_devices_setup);
/*
* The Machine Vector
*/
@ -101,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = {
.mv_outsl = se_outsl,
.mv_init_irq = init_se_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_se,
#endif
};
ALIAS_MV(se)

View File

@ -5,4 +5,3 @@
obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,51 +0,0 @@
/*
* linux/arch/sh/boards/se/7751/led.c
*
* Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains Solution Engine specific LED code.
*/
#include <linux/sched.h>
#include <asm/se7751.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_7751se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short* p = (volatile unsigned short*)PA_LED;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ( (300<<FSHIFT)/
((avenrun[0]/5) + (3<<FSHIFT)) );
if (up) {
if (bit == 7) {
bit--;
up=0;
} else {
bit ++;
}
} else {
if (bit == 0) {
bit++;
up=1;
} else {
bit--;
}
}
*p = 1<<(bit+8);
}

View File

@ -9,11 +9,11 @@
* Ian da Silva and Jeremy Siegel, 2001.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7751.h>
#include <asm/io.h>
void heartbeat_7751se(void);
void init_7751se_IRQ(void);
#ifdef CONFIG_SH_KGDB
@ -161,11 +161,40 @@ static int kgdb_uart_setup(void)
}
#endif /* CONFIG_SH_KGDB */
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se7751_devices[] __initdata = {
&smc91x_device,
&heartbeat_device,
};
static int __init se7751_devices_setup(void)
{
return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
}
__initcall(se7751_devices_setup);
/*
* The Machine Vector
*/
struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
.mv_setup = sh7751se_setup,
@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = {
.mv_outsl = sh7751se_outsl,
.mv_init_irq = init_7751se_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_7751se,
#endif
};
ALIAS_MV(7751se)

View File

@ -3,4 +3,3 @@
#
obj-y := setup.o rtc.o
obj-$(CONFIG_HEARTBEAT) += led.o

View File

@ -1,48 +0,0 @@
/*
* linux/arch/sh/boards/sh03/led.c
*
* Copyright (C) 2004 Saito.K Interface Corporation.
*
* This file contains Interface CTP/PCI-SH03 specific LED code.
*/
#include <linux/sched.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_sh03(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned char* p = (volatile unsigned char*)0xa0800000;
static unsigned bit = 0, up = 1;
cnt += 1;
if (cnt < period) {
return;
}
cnt = 0;
/* Go through the points (roughly!):
* f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
*/
period = 110 - ( (300<<FSHIFT)/
((avenrun[0]/5) + (3<<FSHIFT)) );
if (up) {
if (bit == 7) {
bit--;
up=0;
} else {
bit ++;
}
} else {
if (bit == 0) {
bit++;
up=1;
} else {
bit--;
}
}
*p = 1<<bit;
}

View File

@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <asm/sh03/io.h>
@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p)
board_time_init = sh03_time_init;
}
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa0800000,
.end = 0xa0800000 + 8 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *sh03_devices[] __initdata = {
&heartbeat_device,
};
static int __init sh03_devices_setup(void)
{
return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
}
__initcall(sh03_devices_setup);
struct sh_machine_vector mv_sh03 __initmv = {
.mv_name = "Interface (CTP/PCI-SH03)",
.mv_setup = sh03_setup,
.mv_nr_irqs = 48,
.mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_sh03,
#endif
};
ALIAS_MV(sh03)

View File

@ -6,3 +6,4 @@ obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_SH_DMA) += dma/
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
obj-$(CONFIG_HEARTBEAT) += heartbeat.o