mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-30 12:49:36 +00:00
ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg <grinberg@compulab.co.il>. Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
993e4fbd78
commit
3b972bf06c
21 changed files with 150 additions and 57 deletions
|
@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void)
|
|||
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
|
||||
omap_serial_init();
|
||||
omap_sdrc_init(NULL, NULL);
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_init(mmc);
|
||||
omap2_usbfs_init(&sdp2430_usb_config);
|
||||
|
||||
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
|
||||
|
|
|
@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
*/
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
||||
.gpio_wp = 4,
|
||||
.deferred = true,
|
||||
},
|
||||
{
|
||||
.mmc = 2,
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
||||
.gpio_wp = 7,
|
||||
.deferred = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
|
|||
*/
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
mmc[1].gpio_cd = gpio + 1;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
|
||||
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
|
||||
|
@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void)
|
|||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap_board_config = sdp3430_config;
|
||||
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
|
||||
omap_hsmmc_init(mmc);
|
||||
omap3430_i2c_init();
|
||||
omap_display_init(&sdp3430_dss_data);
|
||||
if (omap_rev() > OMAP3430_REV_ES1_0)
|
||||
|
|
|
@ -491,9 +491,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|||
{
|
||||
struct omap2_hsmmc_info *c;
|
||||
|
||||
omap2_hsmmc_init(controllers);
|
||||
omap_hsmmc_init(controllers);
|
||||
for (c = controllers; c->mmc; c++)
|
||||
omap4_twl6030_hsmmc_set_late_init(c->dev);
|
||||
omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -504,7 +504,7 @@ static void __init am3517_evm_init(void)
|
|||
am3517_evm_musb_init();
|
||||
|
||||
/* MMC init function */
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_init(mmc);
|
||||
}
|
||||
|
||||
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
|
||||
|
|
|
@ -413,7 +413,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
|
||||
.deferred = true,
|
||||
},
|
||||
{
|
||||
.mmc = 2,
|
||||
|
@ -471,7 +471,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
|
|||
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -639,6 +639,7 @@ static void __init cm_t3x_common_init(void)
|
|||
omap_serial_init();
|
||||
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
|
||||
mt46h32m32lf6_sdrc_params);
|
||||
omap_hsmmc_init(mmc);
|
||||
cm_t35_init_i2c();
|
||||
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
|
||||
cm_t35_init_ethernet();
|
||||
|
|
|
@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.mmc = 1,
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
||||
.gpio_wp = 29,
|
||||
.deferred = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
|
|||
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
|
||||
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
|
||||
|
@ -636,6 +637,7 @@ static void __init devkit8000_init(void)
|
|||
|
||||
omap_dm9000_init();
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
devkit8000_i2c_init();
|
||||
platform_add_devices(devkit8000_devices,
|
||||
ARRAY_SIZE(devkit8000_devices));
|
||||
|
|
|
@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
.deferred = true,
|
||||
},
|
||||
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
|
||||
{
|
||||
|
@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev,
|
|||
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
|
||||
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
|
||||
|
@ -639,6 +640,9 @@ static void __init igep_init(void)
|
|||
|
||||
/* Get IGEP2 hardware revision */
|
||||
igep2_get_revision();
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
|
||||
/* Register I2C busses and drivers */
|
||||
igep_i2c_init();
|
||||
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
|
||||
|
|
|
@ -424,7 +424,7 @@ static void __init omap_ldp_init(void)
|
|||
board_nand_init(ldp_nand_partitions,
|
||||
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
|
||||
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_init(mmc);
|
||||
ldp_display_init();
|
||||
}
|
||||
|
||||
|
|
|
@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.mmc = 1,
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
||||
.gpio_wp = -EINVAL,
|
||||
.deferred = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
@ -277,7 +278,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
|
|||
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/*
|
||||
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
|
||||
|
@ -521,6 +522,7 @@ static void __init omap3_beagle_init(void)
|
|||
{
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap3_beagle_init_rev();
|
||||
omap_hsmmc_init(mmc);
|
||||
omap3_beagle_i2c_init();
|
||||
|
||||
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
|
||||
|
|
|
@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = 63,
|
||||
.deferred = true,
|
||||
},
|
||||
#ifdef CONFIG_WL12XX_PLATFORM_DATA
|
||||
{
|
||||
|
@ -363,7 +364,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
|
|||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/*
|
||||
* Most GPIOs are for USB OTG. Some are mostly sent to
|
||||
|
@ -644,6 +645,7 @@ static void __init omap3_evm_init(void)
|
|||
omap_board_config = omap3_evm_config;
|
||||
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
omap3_evm_i2c_init();
|
||||
|
||||
omap_display_init(&omap3_evm_dss_data);
|
||||
|
|
|
@ -128,7 +128,7 @@ static void __init board_mmc_init(void)
|
|||
return;
|
||||
}
|
||||
|
||||
omap2_hsmmc_init(board_mmc_info);
|
||||
omap_hsmmc_init(board_mmc_info);
|
||||
}
|
||||
|
||||
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
|
||||
|
|
|
@ -273,6 +273,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
|
|||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = 126,
|
||||
.ext_clock = 0,
|
||||
.deferred = true,
|
||||
},
|
||||
{
|
||||
.mmc = 2,
|
||||
|
@ -281,6 +282,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
|
|||
.gpio_wp = 127,
|
||||
.ext_clock = 1,
|
||||
.transceiver = true,
|
||||
.deferred = true,
|
||||
},
|
||||
{
|
||||
.mmc = 3,
|
||||
|
@ -300,7 +302,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
|
|||
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
|
||||
omap3pandora_mmc[0].gpio_cd = gpio + 0;
|
||||
omap3pandora_mmc[1].gpio_cd = gpio + 1;
|
||||
omap2_hsmmc_init(omap3pandora_mmc);
|
||||
omap_hsmmc_late_init(omap3pandora_mmc);
|
||||
|
||||
/* gpio + 13 drives 32kHz buffer for wifi module */
|
||||
gpio_32khz = gpio + 13;
|
||||
|
@ -580,6 +582,7 @@ static struct omap_board_mux board_mux[] __initdata = {
|
|||
static void __init omap3pandora_init(void)
|
||||
{
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap_hsmmc_init(omap3pandora_mmc);
|
||||
omap3pandora_i2c_init();
|
||||
pandora_wl1251_init();
|
||||
platform_add_devices(omap3pandora_devices,
|
||||
|
|
|
@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = {
|
|||
|
||||
static struct omap2_hsmmc_info mmc[] = {
|
||||
{
|
||||
.mmc = 1,
|
||||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = 23,
|
||||
.mmc = 1,
|
||||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = 23,
|
||||
.deferred = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
@ -284,7 +285,7 @@ omap3stalker_twl_gpio_setup(struct device *dev,
|
|||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/*
|
||||
* Most GPIOs are for USB OTG. Some are mostly sent to
|
||||
|
@ -425,6 +426,7 @@ static void __init omap3_stalker_init(void)
|
|||
omap_board_config = omap3_stalker_config;
|
||||
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
omap3_stalker_i2c_init();
|
||||
|
||||
platform_add_devices(omap3_stalker_devices,
|
||||
|
|
|
@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.mmc = 1,
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
||||
.gpio_wp = 29,
|
||||
.deferred = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
@ -125,7 +126,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
|
|||
}
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
/* REVISIT: need ehci-omap hooks for external VBUS
|
||||
* power switch and overcurrent detect
|
||||
|
@ -351,6 +352,7 @@ static void __init omap3_touchbook_init(void)
|
|||
|
||||
pm_power_off = omap3_touchbook_poweroff;
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
omap3_touchbook_i2c_init();
|
||||
platform_add_devices(omap3_touchbook_devices,
|
||||
ARRAY_SIZE(omap3_touchbook_devices));
|
||||
|
|
|
@ -245,9 +245,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|||
{
|
||||
struct omap2_hsmmc_info *c;
|
||||
|
||||
omap2_hsmmc_init(controllers);
|
||||
omap_hsmmc_init(controllers);
|
||||
for (c = controllers; c->mmc; c++)
|
||||
omap4_twl6030_hsmmc_set_late_init(c->dev);
|
||||
omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; }
|
|||
static int overo_twl_gpio_setup(struct device *dev,
|
||||
unsigned gpio, unsigned ngpio)
|
||||
{
|
||||
omap2_hsmmc_init(mmc);
|
||||
|
||||
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
||||
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
|
||||
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
|
||||
|
@ -505,6 +503,7 @@ static void __init overo_init(void)
|
|||
int ret;
|
||||
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap_hsmmc_init(mmc);
|
||||
overo_i2c_init();
|
||||
omap_display_init(&overo_dss_data);
|
||||
omap_serial_init();
|
||||
|
|
|
@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void)
|
|||
ARRAY_SIZE(rm680_peripherals_devices));
|
||||
rm680_i2c_init();
|
||||
gpmc_onenand_init(board_onenand_data);
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_init(mmc);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
|
|
|
@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void)
|
|||
|
||||
partition = omap_mux_get("core");
|
||||
if (partition)
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_init(mmc);
|
||||
|
||||
rx51_charger_init();
|
||||
}
|
||||
|
|
|
@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = {
|
|||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.gpio_wp = -EINVAL,
|
||||
.power_saving = true,
|
||||
.deferred = true,
|
||||
},
|
||||
{
|
||||
.name = "internal",
|
||||
|
@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
|
|||
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
omap2_hsmmc_init(mmc);
|
||||
omap_hsmmc_late_init(mmc);
|
||||
|
||||
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
|
||||
"lcd enable");
|
||||
|
@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void)
|
|||
if (ret)
|
||||
pr_err("error setting wl12xx data: %d\n", ret);
|
||||
|
||||
omap_hsmmc_init(mmc);
|
||||
omap_i2c_init();
|
||||
platform_device_register(&omap_vwlan_device);
|
||||
usb_musb_init(NULL);
|
||||
|
|
|
@ -429,66 +429,131 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
|
|||
}
|
||||
|
||||
static int omap_hsmmc_done;
|
||||
|
||||
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
struct omap_mmc_platform_data *mmc_pdata;
|
||||
int res;
|
||||
|
||||
if (omap_hsmmc_done != 1)
|
||||
return;
|
||||
|
||||
omap_hsmmc_done++;
|
||||
|
||||
for (; c->mmc; c++) {
|
||||
if (!c->deferred)
|
||||
continue;
|
||||
|
||||
pdev = c->pdev;
|
||||
if (!pdev)
|
||||
continue;
|
||||
|
||||
mmc_pdata = pdev->dev.platform_data;
|
||||
if (!mmc_pdata)
|
||||
continue;
|
||||
|
||||
mmc_pdata->slots[0].switch_pin = c->gpio_cd;
|
||||
mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
|
||||
|
||||
res = omap_device_register(pdev);
|
||||
if (res)
|
||||
pr_err("Could not late init MMC %s\n",
|
||||
c->name);
|
||||
}
|
||||
}
|
||||
|
||||
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
|
||||
|
||||
void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
|
||||
static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
|
||||
int ctrl_nr)
|
||||
{
|
||||
struct omap_hwmod *oh;
|
||||
struct omap_hwmod *ohs[1];
|
||||
struct omap_device *od;
|
||||
struct platform_device *pdev;
|
||||
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
|
||||
struct omap_mmc_platform_data *mmc_data;
|
||||
struct omap_mmc_dev_attr *mmc_dev_attr;
|
||||
char *name;
|
||||
int l;
|
||||
int res;
|
||||
|
||||
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
|
||||
if (!mmc_data) {
|
||||
pr_err("Cannot allocate memory for mmc device!\n");
|
||||
goto done;
|
||||
return;
|
||||
}
|
||||
|
||||
if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
|
||||
pr_err("%s fails!\n", __func__);
|
||||
goto done;
|
||||
}
|
||||
res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
|
||||
if (res < 0)
|
||||
goto free_mmc;
|
||||
|
||||
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
|
||||
|
||||
name = "omap_hsmmc";
|
||||
|
||||
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
|
||||
res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
|
||||
"mmc%d", ctrl_nr);
|
||||
WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
|
||||
WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
|
||||
"String buffer overflow in MMC%d device setup\n", ctrl_nr);
|
||||
|
||||
oh = omap_hwmod_lookup(oh_name);
|
||||
if (!oh) {
|
||||
pr_err("Could not look up %s\n", oh_name);
|
||||
kfree(mmc_data->slots[0].name);
|
||||
goto done;
|
||||
goto free_name;
|
||||
}
|
||||
|
||||
ohs[0] = oh;
|
||||
if (oh->dev_attr != NULL) {
|
||||
mmc_dev_attr = oh->dev_attr;
|
||||
mmc_data->controller_flags = mmc_dev_attr->flags;
|
||||
}
|
||||
|
||||
pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
|
||||
sizeof(struct omap_mmc_platform_data), NULL, 0, false);
|
||||
if (IS_ERR(pdev)) {
|
||||
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
|
||||
kfree(mmc_data->slots[0].name);
|
||||
goto done;
|
||||
pdev = platform_device_alloc(name, ctrl_nr - 1);
|
||||
if (!pdev) {
|
||||
pr_err("Could not allocate pdev for %s\n", name);
|
||||
goto free_name;
|
||||
}
|
||||
/*
|
||||
* return device handle to board setup code
|
||||
* required to populate for regulator framework structure
|
||||
*/
|
||||
hsmmcinfo->dev = &pdev->dev;
|
||||
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
|
||||
|
||||
done:
|
||||
od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
|
||||
if (!od) {
|
||||
pr_err("Could not allocate od for %s\n", name);
|
||||
goto put_pdev;
|
||||
}
|
||||
|
||||
res = platform_device_add_data(pdev, mmc_data,
|
||||
sizeof(struct omap_mmc_platform_data));
|
||||
if (res) {
|
||||
pr_err("Could not add pdata for %s\n", name);
|
||||
goto put_pdev;
|
||||
}
|
||||
|
||||
hsmmcinfo->pdev = pdev;
|
||||
|
||||
if (hsmmcinfo->deferred)
|
||||
goto free_mmc;
|
||||
|
||||
res = omap_device_register(pdev);
|
||||
if (res) {
|
||||
pr_err("Could not register od for %s\n", name);
|
||||
goto free_od;
|
||||
}
|
||||
|
||||
goto free_mmc;
|
||||
|
||||
free_od:
|
||||
omap_device_delete(od);
|
||||
|
||||
put_pdev:
|
||||
platform_device_put(pdev);
|
||||
|
||||
free_name:
|
||||
kfree(mmc_data->slots[0].name);
|
||||
|
||||
free_mmc:
|
||||
kfree(mmc_data);
|
||||
}
|
||||
|
||||
void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
||||
void omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
|
@ -521,7 +586,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|||
}
|
||||
|
||||
for (; controllers->mmc; controllers++)
|
||||
omap_init_hsmmc(controllers, controllers->mmc);
|
||||
omap_hsmmc_init_one(controllers, controllers->mmc);
|
||||
|
||||
}
|
||||
|
||||
|
|
|
@ -21,10 +21,11 @@ struct omap2_hsmmc_info {
|
|||
bool no_off; /* power_saving and power is not to go off */
|
||||
bool no_off_init; /* no power off when not in MMC sleep state */
|
||||
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
|
||||
bool deferred; /* mmc needs a deferred probe */
|
||||
int gpio_cd; /* or -EINVAL */
|
||||
int gpio_wp; /* or -EINVAL */
|
||||
char *name; /* or NULL for default */
|
||||
struct device *dev; /* returned: pointer to mmc adapter */
|
||||
struct platform_device *pdev; /* mmc controller instance */
|
||||
int ocr_mask; /* temporary HACK */
|
||||
/* Remux (pad configuration) when powering on/off */
|
||||
void (*remux)(struct device *dev, int slot, int power_on);
|
||||
|
@ -34,11 +35,16 @@ struct omap2_hsmmc_info {
|
|||
|
||||
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
|
||||
|
||||
void omap2_hsmmc_init(struct omap2_hsmmc_info *);
|
||||
void omap_hsmmc_init(struct omap2_hsmmc_info *);
|
||||
void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
|
||||
|
||||
#else
|
||||
|
||||
static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
|
||||
static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
|
||||
{
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in a new issue