[PATCH] x86: default to physical mode on hotplug CPU kernels

Default to physical mode on hotplug CPU kernels.  Furher simplify and clean up
the APIC initialization code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
This commit is contained in:
Ingo Molnar 2007-05-02 19:27:04 +02:00 committed by Andi Kleen
parent 424df39010
commit 3c43f03908
13 changed files with 16 additions and 26 deletions

View File

@ -874,7 +874,7 @@ static void __init acpi_process_madt(void)
acpi_ioapic = 1;
smp_found_config = 1;
clustered_apic_check();
setup_apic_routing();
}
}
if (error == -EINVAL) {

View File

@ -477,7 +477,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
}
++mpc_record;
}
clustered_apic_check();
setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "SMP mptable: no processors registered!\n");
return num_processors;

View File

@ -35,11 +35,8 @@ struct genapic __read_mostly *genapic = &apic_flat;
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init clustered_apic_check(void)
void __init setup_apic_routing(void)
{
unsigned int i, max_apic = 0;
u8 id;
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
@ -49,17 +46,10 @@ void __init clustered_apic_check(void)
if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
genapic = &apic_physflat;
else
#endif
for (i = 0; i < NR_CPUS; i++) {
id = bios_cpu_apicid[i];
if (id == BAD_APICID)
continue;
if (id > max_apic)
max_apic = id;
}
if (max_apic < 8)
if (cpus_weight(cpu_possible_map) <= 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;

View File

@ -300,7 +300,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
}
}
}
clustered_apic_check();
setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;

View File

@ -36,7 +36,7 @@ struct genapic {
void (*init_apic_ldr)(void);
physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
void (*clustered_apic_check)(void);
void (*setup_apic_routing)(void);
int (*multi_timer_check)(int apic, int irq);
int (*apicid_to_node)(int logical_apicid);
int (*cpu_to_logical_apicid)(int cpu);
@ -99,7 +99,7 @@ struct genapic {
APICFUNC(check_apicid_present) \
APICFUNC(init_apic_ldr) \
APICFUNC(ioapic_phys_id_map) \
APICFUNC(clustered_apic_check) \
APICFUNC(setup_apic_routing) \
APICFUNC(multi_timer_check) \
APICFUNC(apicid_to_node) \
APICFUNC(cpu_to_logical_apicid) \

View File

@ -71,7 +71,7 @@ static inline void init_apic_ldr(void)
apic_write_around(APIC_LDR, val);
}
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Physflat", nr_ioapics);

View File

@ -54,7 +54,7 @@ static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
return phys_map;
}
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Flat", nr_ioapics);

View File

@ -81,7 +81,7 @@ static inline void enable_apic_mode(void)
}
extern int apic_version [MAX_APICS];
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
int apic = bios_cpu_apicid[smp_processor_id()];
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",

View File

@ -13,7 +13,7 @@
#define apic_id_registered (genapic->apic_id_registered)
#define init_apic_ldr (genapic->init_apic_ldr)
#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
#define clustered_apic_check (genapic->clustered_apic_check)
#define setup_apic_routing (genapic->setup_apic_routing)
#define multi_timer_check (genapic->multi_timer_check)
#define apicid_to_node (genapic->apicid_to_node)
#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid)

View File

@ -34,7 +34,7 @@ static inline void init_apic_ldr(void)
/* Already done in NUMA-Q firmware */
}
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"NUMA-Q", nr_ioapics);

View File

@ -80,7 +80,7 @@ static inline int apic_id_registered(void)
return 1;
}
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);

View File

@ -47,7 +47,7 @@ static inline void summit_check(char *oem, char *productid)
{
}
static inline void clustered_apic_check(void)
static inline void setup_apic_routing(void)
{
}

View File

@ -83,7 +83,7 @@ extern void setup_secondary_APIC_clock (void);
extern int APIC_init_uniprocessor (void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
extern void clustered_apic_check(void);
extern void setup_apic_routing(void);
extern void setup_APIC_extened_lvt(unsigned char lvt_off, unsigned char vector,
unsigned char msg_type, unsigned char mask);