net: dsa: mt7530: 1G can also support 1000BASE-X link mode

[ Upstream commit 66f862563e ]

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Russell King (Oracle) 2022-04-11 10:45:56 +01:00 committed by Greg Kroah-Hartman
parent 4e54700532
commit 3dc96c312b

View file

@ -2535,13 +2535,7 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
/* Port5 supports ethier RGMII or SGMII.
* Port6 supports SGMII only.
*/
switch (port) {
case 5:
if (mt7531_is_rgmii_port(priv, port))
break;
fallthrough;
case 6:
phylink_set(supported, 1000baseX_Full);
if (port == 6) {
phylink_set(supported, 2500baseX_Full);
phylink_set(supported, 2500baseT_Full);
}
@ -2909,8 +2903,6 @@ static void
mt7530_mac_port_validate(struct dsa_switch *ds, int port,
unsigned long *supported)
{
if (port == 5)
phylink_set(supported, 1000baseX_Full);
}
static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
@ -2947,8 +2939,10 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
}
/* This switch only supports 1G full-duplex. */
if (state->interface != PHY_INTERFACE_MODE_MII)
if (state->interface != PHY_INTERFACE_MODE_MII) {
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
}
priv->info->mac_port_validate(ds, port, mask);