Fix trivial typos in Kconfig* files

Fix several typos in help text in Kconfig* files.

Signed-off-by: David Sterba <dave@jikos.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This commit is contained in:
David Sterba 2007-05-09 07:12:20 +02:00 committed by Adrian Bunk
parent ccf6780dc3
commit 3dde6ad8fc
21 changed files with 27 additions and 27 deletions

View File

@ -603,7 +603,7 @@ config ETRAX_CARDBUS
select HOTPLUG
select PCCARD_NONSTATIC
help
Enabled the ETRAX Carbus driver.
Enabled the ETRAX Cardbus driver.
config PCI
bool

View File

@ -21,12 +21,12 @@ config GDB_MAGICPRINT
bool "Message Output for GDB MagicPrint service"
depends on (H8300H_SIM || H8S_SIM)
help
kernel messages output useing MagicPrint service from GDB
kernel messages output using MagicPrint service from GDB
config SYSCALL_PRINT
bool "SystemCall trace print"
help
outout history of systemcall
output history of systemcall
config GDB_DEBUG
bool "Use gdb stub"

View File

@ -108,7 +108,7 @@ config MCORE2
bool "Core 2/newer Xeon"
help
Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
CPUs. You can distingush newer from older Xeons by the CPU family
CPUs. You can distinguish newer from older Xeons by the CPU family
in /proc/cpuinfo. Newer ones have 6.
config MPENTIUM4
@ -172,7 +172,7 @@ config MWINCHIP3D
help
Select this for an IDT Winchip-2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment reqirements. Also enable out of order memory
and alignment requirements. Also enable out of order memory
stores for this CPU, which can increase performance of some
operations.

View File

@ -468,7 +468,7 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is indepedent of the system firmware. And like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.

View File

@ -5,7 +5,7 @@ source "lib/Kconfig.debug"
config FULLDEBUG
bool "Full Symbolic/Source Debugging support"
help
Enable debuging symbols on kernel build.
Enable debugging symbols on kernel build.
config HIGHPROFILE
bool "Use fast second timer for profiling"

View File

@ -956,7 +956,7 @@ choice
byte order. These modes require different kernels and a different
Linux distribution. In general there is one preferred byteorder for a
particular system but some systems are just as commonly used in the
one or the other endianess.
one or the other endianness.
config CPU_BIG_ENDIAN
bool "Big endian"
@ -1750,7 +1750,7 @@ config ARCH_DISCONTIGMEM_ENABLE
bool
default y if SGI_IP27
help
Say Y to upport efficient handling of discontiguous physical memory,
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
@ -1938,7 +1938,7 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is indepedent of the system firmware. And like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.

View File

@ -32,7 +32,7 @@ config HCALL_STATS
depends on PPC_PSERIES && DEBUG_FS
help
Adds code to keep track of the number of hypervisor calls made and
the amount of time spent in hypervisor callsr. Wall time spent in
the amount of time spent in hypervisor calls. Wall time spent in
each call is always calculated, and if available CPU cycles spent
are also calculated. A directory named hcall_inst is added at the
root of the debugfs filesystem. Within the hcall_inst directory

View File

@ -54,7 +54,7 @@ config S390_PRNG
default "m"
help
Select this option if you want to use the s390 pseudo random number
generator. The PRNG is part of the cryptograhic processor functions
generator. The PRNG is part of the cryptographic processor functions
and uses triple-DES to generate secure random numbers like the
ANSI X9.17 standard. The PRNG is usable via the char device
/dev/prandom.

View File

@ -271,7 +271,7 @@ config CRYPTO_SERPENT
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
variant of Serpent for compatibility with old kerneli code.
variant of Serpent for compatibility with old kerneli.org code.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>

View File

@ -435,7 +435,7 @@ config PATA_OPTIDMA
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
latops
laptops.
If unsure, say N.

View File

@ -33,7 +33,7 @@ config TCG_NSC
tristate "National Semiconductor TPM Interface"
depends on TCG_TPM && PNPACPI
---help---
If you have a TPM security chip from National Semicondutor
If you have a TPM security chip from National Semiconductor
say Yes and it will be accessible from within Linux. To
compile this driver as a module, choose M here; the module
will be called tpm_nsc.

View File

@ -51,7 +51,7 @@ config CRYPTO_DEV_GEODE
default m
help
Say 'Y' here to use the AMD Geode LX processor on-board AES
engine for the CryptoAPI AES alogrithm.
engine for the CryptoAPI AES algorithm.
To compile this driver as a module, choose M here: the module
will be called geode-aes.

View File

@ -237,7 +237,7 @@ config PMAC_RACKMETER
tristate "Support for Apple XServe front panel LEDs"
depends on PPC_PMAC
help
This driver procides some support to control the front panel
This driver provides some support to control the front panel
blue LEDs "vu-meter" of the XServer macs.
endif # MACINTOSH_DRIVERS

View File

@ -98,7 +98,7 @@ config RTC_INTF_DEV_UIE_EMUL
bool "RTC UIE emulation on dev interface"
depends on RTC_INTF_DEV
help
Provides an emulation for RTC_UIE if the underlaying rtc chip
Provides an emulation for RTC_UIE if the underlying rtc chip
driver does not expose RTC_UIE ioctls. Those requests generate
once-per-second update interrupts, used for synchronization.

View File

@ -558,7 +558,7 @@ config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
depends on USB_SERIAL
help
Say Y here if you have a USB debugging device used to recieve
Say Y here if you have a USB debugging device used to receive
debugging data from another machine. The most common of these
devices is the NetChip TurboCONNECT device.

View File

@ -308,7 +308,7 @@ config SYSFS_DEPRECATED
releases.
If enabled, this option will also move any device structures
that belong to a class, back into the /sys/class heirachy, in
that belong to a class, back into the /sys/class hierarchy, in
order to support older versions of udev.
If you are using a distro that was released in 2006 or later,

View File

@ -23,7 +23,7 @@ config PREEMPT_VOLUNTARY
"explicit preemption points" to the kernel code. These new
preemption points have been selected to reduce the maximum
latency of rescheduling, providing faster application reactions,
at the cost of slighly lower throughput.
at the cost of slightly lower throughput.
This allows reaction to interactive events by allowing a
low priority process to voluntarily preempt itself even if it
@ -43,7 +43,7 @@ config PREEMPT
even if it is in kernel mode executing a system call and would
otherwise not be about to reach a natural preemption point.
This allows applications to run more 'smoothly' even when the
system is under load, at the cost of slighly lower throughput
system is under load, at the cost of slightly lower throughput
and a slight runtime overhead to kernel code.
Select this if you are building a kernel for a desktop or

View File

@ -130,7 +130,7 @@ config IP_ROUTE_MULTIPATH_RR
tristate "MULTIPATH: round robin algorithm"
depends on IP_ROUTE_MULTIPATH_CACHED
help
Mulitpath routes are chosen according to Round Robin
Multipath routes are chosen according to Round Robin
config IP_ROUTE_MULTIPATH_RANDOM
tristate "MULTIPATH: random algorithm"
@ -651,7 +651,7 @@ config TCP_MD5SIG
select CRYPTO
select CRYPTO_MD5
---help---
RFC2385 specifices a method of giving MD5 protection to TCP sessions.
RFC2385 specifies a method of giving MD5 protection to TCP sessions.
Its main (only?) use is to protect BGP sessions between core routers
on the Internet.

View File

@ -28,7 +28,7 @@ config IP6_NF_QUEUE
packets which enables users to receive the filtered packets
with QUEUE target using libipq.
THis option enables the old IPv6-only "ip6_queue" implementation
This option enables the old IPv6-only "ip6_queue" implementation
which has been obsoleted by the new "nfnetlink_queue" code (see
CONFIG_NETFILTER_NETLINK_QUEUE).

View File

@ -197,7 +197,7 @@ config NF_CONNTRACK_PPTP
Please note that not all PPTP modes of operation are supported yet.
Specifically these limitations exist:
- Blindy assumes that control connections are always established
- Blindly assumes that control connections are always established
in PNS->PAC direction. This is a violation of RFC2637.
- Only supports a single call within each session

View File

@ -137,7 +137,7 @@ config SECURITY_SELINUX_POLICYDB_VERSION_MAX
Examples:
For the Fedora Core 3 or 4 Linux distributions, enable this option
and set the value via the next option. For Fedore Core 5 and later,
and set the value via the next option. For Fedora Core 5 and later,
do not enable this option.
If you are unsure how to answer this question, answer N.