mmc: Merge branch fixes into next

Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Documentation/devicetree/bindings/mmc/sdhci-msm.yaml

@@ -69,7 +69,7 @@ properties:
     maxItems: 4
 
   clocks:
-    minItems: 3
+    minItems: 2
     items:
       - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
       - description: SDC MMC clock, MCLK

drivers/mmc/core/block.c

@@ -179,6 +179,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			       struct mmc_queue *mq);
 static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
 static int mmc_spi_err_check(struct mmc_card *card);
+static int mmc_blk_busy_cb(void *cb_data, bool *busy);
 
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
@@ -470,7 +471,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	struct mmc_data data = {};
 	struct mmc_request mrq = {};
 	struct scatterlist sg;
-	bool r1b_resp, use_r1b_resp = false;
+	bool r1b_resp;
 	unsigned int busy_timeout_ms;
 	int err;
 	unsigned int target_part;
@@ -551,8 +552,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
 	r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
 	if (r1b_resp)
-		use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
-						    busy_timeout_ms);
+		mmc_prepare_busy_cmd(card->host, &cmd, busy_timeout_ms);
 
 	mmc_wait_for_req(card->host, &mrq);
 	memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
@@ -605,19 +605,28 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if (idata->ic.postsleep_min_us)
 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
 
-	/* No need to poll when using HW busy detection. */
-	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
-		return 0;
-
 	if (mmc_host_is_spi(card->host)) {
 		if (idata->ic.write_flag || r1b_resp || cmd.flags & MMC_RSP_SPI_BUSY)
 			return mmc_spi_err_check(card);
 		return err;
 	}
-	/* Ensure RPMB/R1B command has completed by polling with CMD13. */
-	if (idata->rpmb || r1b_resp)
-		err = mmc_poll_for_busy(card, busy_timeout_ms, false,
-					MMC_BUSY_IO);
+
+	/*
+	 * Ensure RPMB, writes and R1B responses are completed by polling with
+	 * CMD13. Note that, usually we don't need to poll when using HW busy
+	 * detection, but here it's needed since some commands may indicate the
+	 * error through the R1 status bits.
+	 */
+	if (idata->rpmb || idata->ic.write_flag || r1b_resp) {
+		struct mmc_blk_busy_data cb_data = {
+			.card = card,
+		};
+
+		err = __mmc_poll_for_busy(card->host, 0, busy_timeout_ms,
+					  &mmc_blk_busy_cb, &cb_data);
+
+		idata->ic.response[0] = cb_data.status;
+	}
 
 	return err;
 }

drivers/mmc/core/sdio.c

@@ -1089,8 +1089,14 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		}
 		err = mmc_sdio_reinit_card(host);
 	} else if (mmc_card_wake_sdio_irq(host)) {
-		/* We may have switched to 1-bit mode during suspend */
+		/*
+		 * We may have switched to 1-bit mode during suspend,
+		 * need to hold retuning, because tuning only supprt
+		 * 4-bit mode or 8 bit mode.
+		 */
+		mmc_retune_hold_now(host);
 		err = sdio_enable_4bit_bus(host->card);
+		mmc_retune_release(host);
 	}
 
 	if (err)

drivers/mmc/host/mtk-sd.c

@@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host)
 	u32 val;
 
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
-	readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
+	readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
 
 	sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
-	readl_poll_timeout(host->base + MSDC_FIFOCS, val,
-			   !(val & MSDC_FIFOCS_CLR), 0, 0);
+	readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val,
+				  !(val & MSDC_FIFOCS_CLR), 0, 0);
 
 	val = readl(host->base + MSDC_INT);
 	writel(val, host->base + MSDC_INT);

drivers/mmc/host/sdhci-pci-gli.c

@@ -1158,42 +1158,6 @@ static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
 	return value;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
-{
-	struct sdhci_pci_slot *slot = chip->slots[0];
-
-	pci_free_irq_vectors(slot->chip->pdev);
-	gli_pcie_enable_msi(slot);
-
-	return sdhci_pci_resume_host(chip);
-}
-
-static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip)
-{
-	struct sdhci_pci_slot *slot = chip->slots[0];
-	int ret;
-
-	ret = sdhci_pci_gli_resume(chip);
-	if (ret)
-		return ret;
-
-	return cqhci_resume(slot->host->mmc);
-}
-
-static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip)
-{
-	struct sdhci_pci_slot *slot = chip->slots[0];
-	int ret;
-
-	ret = cqhci_suspend(slot->host->mmc);
-	if (ret)
-		return ret;
-
-	return sdhci_suspend_host(slot->host);
-}
-#endif
-
 static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
 					  struct mmc_ios *ios)
 {
@@ -1434,6 +1398,70 @@ static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
+{
+	struct sdhci_pci_slot *slot = chip->slots[0];
+
+	pci_free_irq_vectors(slot->chip->pdev);
+	gli_pcie_enable_msi(slot);
+
+	return sdhci_pci_resume_host(chip);
+}
+
+static int gl9763e_resume(struct sdhci_pci_chip *chip)
+{
+	struct sdhci_pci_slot *slot = chip->slots[0];
+	int ret;
+
+	ret = sdhci_pci_gli_resume(chip);
+	if (ret)
+		return ret;
+
+	ret = cqhci_resume(slot->host->mmc);
+	if (ret)
+		return ret;
+
+	/*
+	 * Disable LPM negotiation to bring device back in sync
+	 * with its runtime_pm state.
+	 */
+	gl9763e_set_low_power_negotiation(slot, false);
+
+	return 0;
+}
+
+static int gl9763e_suspend(struct sdhci_pci_chip *chip)
+{
+	struct sdhci_pci_slot *slot = chip->slots[0];
+	int ret;
+
+	/*
+	 * Certain SoCs can suspend only with the bus in low-
+	 * power state, notably x86 SoCs when using S0ix.
+	 * Re-enable LPM negotiation to allow entering L1 state
+	 * and entering system suspend.
+	 */
+	gl9763e_set_low_power_negotiation(slot, true);
+
+	ret = cqhci_suspend(slot->host->mmc);
+	if (ret)
+		goto err_suspend;
+
+	ret = sdhci_suspend_host(slot->host);
+	if (ret)
+		goto err_suspend_host;
+
+	return 0;
+
+err_suspend_host:
+	cqhci_resume(slot->host->mmc);
+err_suspend:
+	gl9763e_set_low_power_negotiation(slot, false);
+	return ret;
+}
+#endif
+
 static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
 {
 	struct pci_dev *pdev = slot->chip->pdev;
@@ -1541,8 +1569,8 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
 	.probe_slot	= gli_probe_slot_gl9763e,
 	.ops            = &sdhci_gl9763e_ops,
 #ifdef CONFIG_PM_SLEEP
-	.resume		= sdhci_cqhci_gli_resume,
-	.suspend	= sdhci_cqhci_gli_suspend,
+	.resume		= gl9763e_resume,
+	.suspend	= gl9763e_suspend,
 #endif
 #ifdef CONFIG_PM
 	.runtime_suspend = gl9763e_runtime_suspend,

drivers/mmc/host/sdhci-sprd.c

@@ -644,6 +644,7 @@ static int sdhci_sprd_tuning(struct mmc_host *mmc, struct mmc_card *card,
 	best_clk_sample = sdhci_sprd_get_best_clk_sample(mmc, value);
 	if (best_clk_sample < 0) {
 		dev_err(mmc_dev(host->mmc), "all tuning phase fail!\n");
+		err = best_clk_sample;
 		goto out;
 	}