can: at91: remove at91_can_data

struct at91_can_data was used to pass a callback to the driver, allowing it
to switch the transceiver on and off. As all at91 boards are now using DT,
this is not used anymore, remove that structure.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Alexandre Belloni 2015-10-08 16:56:07 +02:00 committed by Marc Kleine-Budde
parent ba61a8d9d7
commit 42160a041d
2 changed files with 0 additions and 26 deletions

View File

@ -8,15 +8,6 @@
* Public License ("GPL") version 2 as distributed in the 'COPYING'
* file from the main directory of the linux kernel source.
*
*
* Your platform definition file should specify something like:
*
* static struct at91_can_data ek_can_data = {
* transceiver_switch = sam9263ek_transceiver_switch,
* };
*
* at91_add_device_can(&ek_can_data);
*
*/
#include <linux/clk.h>
@ -33,7 +24,6 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/platform_data/atmel.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
@ -324,15 +314,6 @@ static inline u32 at91_can_id_to_reg_mid(canid_t can_id)
return reg_mid;
}
/*
* Swtich transceiver on or off
*/
static void at91_transceiver_switch(const struct at91_priv *priv, int on)
{
if (priv->pdata && priv->pdata->transceiver_switch)
priv->pdata->transceiver_switch(on);
}
static void at91_setup_mailboxes(struct net_device *dev)
{
struct at91_priv *priv = netdev_priv(dev);
@ -416,7 +397,6 @@ static void at91_chip_start(struct net_device *dev)
at91_set_bittiming(dev);
at91_setup_mailboxes(dev);
at91_transceiver_switch(priv, 1);
/* enable chip */
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
@ -444,7 +424,6 @@ static void at91_chip_stop(struct net_device *dev, enum can_state state)
reg_mr = at91_read(priv, AT91_MR);
at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
at91_transceiver_switch(priv, 0);
priv->can.state = state;
}

View File

@ -74,11 +74,6 @@ struct atmel_uart_data {
struct serial_rs485 rs485; /* rs485 settings */
};
/* CAN */
struct at91_can_data {
void (*transceiver_switch)(int on);
};
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);