From 42dc30231ba35939213c33378c17cb81c31b0a37 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 24 Jun 2013 12:50:16 +0200 Subject: [PATCH] regulator: max8973: initial DT support This patch adds primitive DT support to the max8973 regulator driver. None of the configuration parameters, supported in the platform data are yet available in DT, therefore no configuration is performed if booting with no platform data. This means, that DT instantiation can only be used on boards, where no run-time configuration of the chip is required. In such cases the driver can be used to scale its output voltage. In the future support for configuration parameters should be added. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mark Brown --- .../bindings/regulator/max8973-regulator.txt | 21 +++++++++++ drivers/regulator/max8973-regulator.c | 37 +++++++++++++------ 2 files changed, 46 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/max8973-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt new file mode 100644 index 000000000000..8d38ab2acac5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt @@ -0,0 +1,21 @@ +* Maxim MAX8973 Voltage Regulator + +Required properties: + +- compatible: must be "maxium,max8973" +- reg: the i2c slave address of the regulator. It should be 0x1b. + +Any standard regulator properties can be used to configure the single max8973 +DCDC. + +Example: + + max8973@1b { + compatible = "maxium,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index b2dbdd70cab1..0c5195a842e2 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -26,10 +26,12 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include @@ -370,7 +372,8 @@ static int max8973_probe(struct i2c_client *client, int ret; pdata = client->dev.platform_data; - if (!pdata) { + + if (!pdata && !client->dev.of_node) { dev_err(&client->dev, "No Platform data"); return -EIO; } @@ -400,7 +403,7 @@ static int max8973_probe(struct i2c_client *client, max->desc.uV_step = MAX8973_VOLATGE_STEP; max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE; - if (!pdata->enable_ext_control) { + if (!pdata || !pdata->enable_ext_control) { max->desc.enable_reg = MAX8973_VOUT; max->desc.enable_mask = MAX8973_VOUT_ENABLE; max->ops.enable = regulator_enable_regmap; @@ -408,12 +411,17 @@ static int max8973_probe(struct i2c_client *client, max->ops.is_enabled = regulator_is_enabled_regmap; } - max->enable_external_control = pdata->enable_ext_control; - max->dvs_gpio = pdata->dvs_gpio; - max->curr_gpio_val = pdata->dvs_def_state; - max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state; + if (pdata) { + max->dvs_gpio = pdata->dvs_gpio; + max->enable_external_control = pdata->enable_ext_control; + max->curr_gpio_val = pdata->dvs_def_state; + max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state; + } else { + max->dvs_gpio = -EINVAL; + max->curr_vout_reg = MAX8973_VOUT; + } + max->lru_index[0] = max->curr_vout_reg; - max->valid_dvs_gpio = false; if (gpio_is_valid(max->dvs_gpio)) { int gpio_flags; @@ -439,16 +447,21 @@ static int max8973_probe(struct i2c_client *client, max->lru_index[i] = i; max->lru_index[0] = max->curr_vout_reg; max->lru_index[max->curr_vout_reg] = 0; + } else { + max->valid_dvs_gpio = false; } - ret = max8973_init_dcdc(max, pdata); - if (ret < 0) { - dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret); - return ret; + if (pdata) { + ret = max8973_init_dcdc(max, pdata); + if (ret < 0) { + dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret); + return ret; + } } config.dev = &client->dev; - config.init_data = pdata->reg_init_data; + config.init_data = pdata ? pdata->reg_init_data : + of_get_regulator_init_data(&client->dev, client->dev.of_node); config.driver_data = max; config.of_node = client->dev.of_node; config.regmap = max->regmap;