ARM: SoC fixes

We've been sitting on fixes for a while, and they keep trickling in at a low
 rate. Nothing in here comes across as particularly scary or noteworthy, for
 the most part it's a large collection of small DT tweaks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYgVpgAAoJEIwa5zzehBx3umkP/A2082k9R6srk+/bdeDf6F+w
 YiiMJdu37jWb/W71gMlr95NC3zmk4c+U0eHj8iOdsuOYyzSZ6uUQcm8Etg7N2JwR
 cupsySXvlRJ9Hq28SPe6vRnNFqGiDGmGrcfNlwnfHd/CausaJBdcocbyTsVt+omO
 WGMDPy5miN8TIbYQiu6jF2sXkuuVHwXlQyBi52xW5w7Uy0iZDZdsW6GuziK0zpDH
 k0QktKkVx/Q8Riy3b9Vj7kKwvaGXF2JBMsGpORhs4+JcdZl9u+GBJnmehpXmABTn
 8mXEU5zu6gnBHMXxExaK/ZlFDk0yHNxGfapoRQwYecPeBZQGXWu9vyUa3/38npLr
 egyMDzBgJJyHXbs7BXy6weiysn8adsNS3juhniL7mLuTp2hGZHNK6IcH2tV4Z/kD
 hq/VTK/BzmKAY/GP3psoQXVavIUifh498ymCkgoZtUx8Eqq9ZrFA9hkm86F/9eOJ
 vfGNTdVuPI51tdKrmqMXglI4iBc35oSyOQUlUL0DXVlKrzzaVPbQwnIZclgI+VGn
 qos8l8vPxDzQ7lRgMzXsmq8D6pDSfUZQqvUr8gld/zNvd8+LsdmVYHdrvbIQu+sN
 TsI0TyfU4JphSdCPtFKasu7aDBmwfB8npDXUcOazAyG8UyHZpikR9WmmIQ63BwRL
 DYVre9JMhrfL6ZY2kaKC
 =cc1U
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We've been sitting on fixes for a while, and they keep trickling in at
  a low rate. Nothing in here comes across as particularly scary or
  noteworthy, for the most part it's a large collection of small DT
  tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (24 commits)
  ARM: dts: da850-evm: fix read access to SPI flash
  ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV
  ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFS
  ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
  ARM: dts: NSP: Fix DT ranges error
  ARM: multi_v7_defconfig: set bcm47xx watchdog
  ARM: multi_v7_defconfig: fix config typo
  ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node
  soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()
  ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation
  ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc
  ARM: dts: sun8i: Support DTB build for NanoPi M1
  ARM: dts: sun6i: hummingbird: Enable display engine again
  ARM: dts: sun6i: Disable display pipeline by default
  ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 3
  ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init
  ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
  ARM: OMAP1: DMA: Correct the number of logical channels
  ARM: dts: am335x-icev2: Remove the duplicated pinmux setting
  ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
  ...
This commit is contained in:
Linus Torvalds 2017-01-19 16:40:03 -08:00
commit 44b4b461a0
26 changed files with 47 additions and 40 deletions

View File

@ -1690,6 +1690,7 @@ M: Krzysztof Kozlowski <krzk@kernel.org>
R: Javier Martinez Canillas <javier@osg.samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
S: Maintained
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/s5p*

View File

@ -846,6 +846,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \

View File

@ -170,7 +170,6 @@
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
>;
};

View File

@ -160,7 +160,7 @@
axi {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x0011c40a>;
ranges = <0x00000000 0x18000000 0x0011c40c>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -99,6 +99,7 @@
#size-cells = <1>;
compatible = "m25p64";
spi-max-frequency = <30000000>;
m25p,fast-read;
reg = <0>;
partition@0 {
label = "U-Boot-SPL";

View File

@ -1378,6 +1378,7 @@
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
rtc: rtc@48838000 {

View File

@ -75,6 +75,6 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-imepdance;
ti,min-output-impedance;
};
};

View File

@ -319,8 +319,6 @@
compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-nitrogen6_max-sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@ -402,6 +400,8 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;

View File

@ -250,8 +250,6 @@
compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-nitrogen6_som2-sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@ -320,6 +318,8 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;

View File

@ -158,7 +158,7 @@
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1_cd>;
pinctrl-0 = <&mmc1_pins>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>;
@ -193,7 +193,8 @@
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/
OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */
OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
>;
};
@ -242,12 +243,6 @@
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */
>;
};
mmc1_cd: pinmux_mmc1_cd {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
>;
};
};

View File

@ -988,6 +988,7 @@
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
dss: dss@58000000 {

View File

@ -357,7 +357,7 @@
};
amba {
compatible = "arm,amba-bus";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;

View File

@ -140,6 +140,10 @@
cpu-supply = <&reg_dcdc3>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};

View File

@ -234,6 +234,7 @@
de: display-engine {
compatible = "allwinner,sun6i-a31-display-engine";
allwinner,pipelines = <&fe0>;
status = "disabled";
};
soc@01c00000 {

View File

@ -56,7 +56,7 @@
};
&pio {
mmc2_pins_nrst: mmc2@0 {
mmc2_pins_nrst: mmc2-rst-pin {
allwinner,pins = "PC16";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;

View File

@ -471,7 +471,7 @@ CONFIG_MESON_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM47XX_WATCHDOG=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM7038_WDT=m
CONFIG_BCM_KONA_WDT=y
CONFIG_MFD_ACT8945A=y
@ -893,7 +893,7 @@ CONFIG_BCM2835_MBOX=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EFI_VARS=m
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y

View File

@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m

View File

@ -32,7 +32,6 @@
#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
static u32 enable_1510_mode;
@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
goto exit_iounmap;
}
d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
if (cpu_is_omap15xx())
d->chan_count = 9;
else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
if (!(d->dev_caps & ENABLE_1510_MODE))
d->chan_count = 16;
/* available logical channels */
if (cpu_is_omap15xx()) {
d->lch_count = 9;
} else {
if (d->dev_caps & ENABLE_1510_MODE)
d->lch_count = 9;
else
d->chan_count = 9;
d->lch_count = 16;
}
p = dma_plat_info;

View File

@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = {
.nshutdown_gpio = 162,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 300000,
.baud_rate = 3000000,
};
static struct platform_device wl128x_device = {

View File

@ -134,8 +134,8 @@ bool prcmu_pending_irq(void)
*/
bool prcmu_is_cpu_in_wfi(int cpu)
{
return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
PRCM_ARM_WFI_STANDBY_WFI0;
return readl(PRCM_ARM_WFI_STANDBY) &
(cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0);
}
/*

View File

@ -137,6 +137,10 @@
};
};
&scpi_clocks {
status = "disabled";
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;

View File

@ -55,7 +55,7 @@
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
clocks {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {

View File

@ -1367,7 +1367,7 @@
};
amba {
compatible = "arm,amba-bus";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;

View File

@ -27,7 +27,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};

View File

@ -72,7 +72,7 @@
<1 10 0xf08>;
};
amba_apu {
amba_apu: amba_apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
@ -175,7 +175,7 @@
};
i2c0: i2c@ff020000 {
compatible = "cdns,i2c-r1p10";
compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@ -185,7 +185,7 @@
};
i2c1: i2c@ff030000 {
compatible = "cdns,i2c-r1p10";
compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;

View File

@ -459,6 +459,7 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
if (IS_ERR(task)) {
dev_err(dev, "can't create rproc_boot thread\n");
ret = PTR_ERR(task);
goto err_put_rproc;
}