Merge branch 'linus' into irq/core to get the GIC updates which

conflict with pending GIC changes.

Conflicts:
	drivers/usb/isp1760/isp1760-core.c
This commit is contained in:
Thomas Gleixner 2015-04-08 23:26:21 +02:00
commit 462b69b1e4
1072 changed files with 11877 additions and 7096 deletions

View File

@ -0,0 +1,27 @@
Code of Conflict
----------------
The Linux kernel development effort is a very personal process compared
to "traditional" ways of developing software. Your code and ideas
behind it will be carefully reviewed, often resulting in critique and
criticism. The review will almost always require improvements to the
code before it can be included in the kernel. Know that this happens
because everyone involved wants to see the best possible solution for
the overall success of Linux. This development process has been proven
to create the most robust operating system kernel ever, and we do not
want to do anything to cause the quality of submission and eventual
result to ever decrease.
If however, anyone feels personally abused, threatened, or otherwise
uncomfortable due to this process, that is not acceptable. If so,
please contact the Linux Foundation's Technical Advisory Board at
<tab@lists.linux-foundation.org>, or the individual members, and they
will work to resolve the issue to the best of their ability. For more
information on who is on the Technical Advisory Board and what their
role is, please see:
http://www.linuxfoundation.org/programs/advisory-councils/tab
As a reviewer of code, please strive to keep things civil and focused on
the technical issues involved. We are all humans, and frustrations can
be high on both sides of the process. Try to keep in mind the immortal
words of Bill and Ted, "Be excellent to each other."

View File

@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
- power-domains: phandle pointing to the parent power domain, for more details
see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.

View File

@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
Boards with the ST STiH410 SoC shall have the following properties:
Required root node property:
compatible = "st,stih410";
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";

View File

@ -7,6 +7,7 @@ Required properties:
- "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
- reg : Should contain I2C/HS-I2C registers location and length
- interrupts : Should contain I2C/HS-I2C interrupt
- clocks : Should contain the I2C/HS-I2C clock specifier
Optional properties:
- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.

View File

@ -27,6 +27,8 @@ property is used.
- amd,serdes-cdr-rate: CDR rate speed selection
- amd,serdes-pq-skew: PQ (data sampling) skew
- amd,serdes-tx-amp: TX amplitude boost
- amd,serdes-dfe-tap-config: DFE taps available to run
- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe_phy@e1240800 {
@ -41,4 +43,6 @@ Example:
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <30>;
amd,serdes-tx-amp = <15>, <15>, <10>;
amd,serdes-dfe-tap-config = <3>, <3>, <1>;
amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};

View File

@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
APM X-Gene SoC.
Required properties for all the ethernet interfaces:
- compatible: Should be "apm,xgene-enet"
- compatible: Should state binding information from the following list,
- "apm,xgene-enet": RGMII based 1G interface
- "apm,xgene1-sgenet": SGMII based 1G interface
- "apm,xgene1-xgenet": XFI based 10G interface
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names
- reg-names: Should contain the register set names

View File

@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4
(DSA_MAX_SWITCHES).
Each of these switch child nodes should have the following required properties:
- reg : Describes the switch address on the MII bus
- reg : Contains two fields. The first one describes the
address on the MII bus. The second is the switch
number that must be unique in cascaded configurations
- #address-cells : Must be 1
- #size-cells : Must be 0

View File

@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
Example:
power: power-controller@12340000 {
@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
==PM domain consumers==
Required properties:

View File

@ -0,0 +1,19 @@
ETRAX FS UART
Required properties:
- compatible : "axis,etraxfs-uart"
- reg: offset and length of the register set for the device.
- interrupts: device interrupt
Optional properties:
- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
line respectively.
Example:
serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
};

View File

@ -21,6 +21,18 @@ Optional properties:
- reg-io-width : the size (in bytes) of the IO accesses that should be
performed on the device. If this property is not present then single byte
accesses are used.
- dcd-override : Override the DCD modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- dsr-override : Override the DTS modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- cts-override : Override the CTS modem status signal. This signal will always
be reported as active instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.
- ri-override : Override the RI modem status signal. This signal will always be
reported as inactive instead of being obtained from the modem status register.
Define this if your serial port does not use this pin.
Example:
@ -31,6 +43,10 @@ Example:
interrupts = <10>;
reg-shift = <2>;
reg-io-width = <4>;
dcd-override;
dsr-override;
cts-override;
ri-override;
};
Example with one clock:

View File

@ -12,6 +12,9 @@ I. For patch submitters
devicetree@vger.kernel.org
and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
all of the DT maintainers.
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.

View File

@ -20,6 +20,7 @@ amlogic Amlogic, Inc.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arasan Arasan Chip Systems
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
@ -27,6 +28,7 @@ atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.

View File

@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.

View File

@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2
byte 4: 0 y6 y5 y4 y3 y2 y1 y0
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
the DualPoint Stick.
Dualpoint device -- interleaved packet format
---------------------------------------------
@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format
byte 7: 0 y6 y5 y4 y3 y2 y1 y0
byte 8: 0 z6 z5 z4 z3 z2 z1 z0
Devices which use the interleaving format normally send standard PS/2 mouse
packets for the DualPoint Stick + ALPS Absolute Mode packets for the
touchpad, switching to the interleaved packet format when both the stick and
the touchpad are used at the same time.
ALPS Absolute Mode - Protocol Version 3
---------------------------------------

View File

@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior.
The kernel does not provide button emulation for such devices but treats
them as any other INPUT_PROP_BUTTONPAD device.
INPUT_PROP_ACCELEROMETER
-------------------------
Directional axes on this device (absolute and/or relative x, y, z) represent
accelerometer data. All other axes retain their meaning. A device must not mix
regular directional axes and accelerometer axes on the same event node.
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.

View File

@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE
The type of approaching tool. A lot of kernel drivers cannot distinguish
between different tool types, such as a finger or a pen. In such cases, the
event should be omitted. The protocol currently supports MT_TOOL_FINGER and
MT_TOOL_PEN [2]. For type B devices, this event is handled by input core;
drivers should instead use input_mt_report_slot_state().
event should be omitted. The protocol currently supports MT_TOOL_FINGER,
MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled
by input core; drivers should instead use input_mt_report_slot_state().
A contact's ABS_MT_TOOL_TYPE may change over time while still touching the
device, because the firmware may not be able to determine which tool is being
used when it first appears.
ABS_MT_BLOB_ID

View File

@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
requesting a special-purpose interrupt. It causes suspend_device_irqs() to
leave the corresponding IRQ enabled so as to allow the interrupt to work all
the time as expected.
leave the corresponding IRQ enabled so as to allow the interrupt to work as
expected during the suspend-resume cycle, but does not guarantee that the
interrupt will wake the system from a suspended state -- for such cases it is
necessary to use enable_irq_wake().
Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed
@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
IRQF_NO_SUSPEND and enable_irq_wake()
-------------------------------------
There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
flag on the same IRQ.
There are very few valid reasons to use both enable_irq_wake() and the
IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
same device.
First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
to individual interrupt handlers, so sharing an IRQ between a system wakeup
interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
make sense.
In rare cases an IRQ can be shared between a wakeup device driver and an
IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
must be able to discern spurious IRQs from genuine wakeup events (signalling
the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
ensure that the IRQ will function as a wakeup source, and must request the IRQ
with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.

View File

@ -637,8 +637,7 @@ F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
AMD MICROCODE UPDATE SUPPORT
M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: amd64-microcode@amd64.org
M: Borislav Petkov <bp@alien8.de>
S: Maintained
F: arch/x86/kernel/cpu/microcode/amd*
@ -1030,6 +1029,16 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE VYBRID ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/*vf610*
F: arch/arm/boot/dts/vf*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1176,7 +1185,7 @@ M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mvebu/
F: drivers/rtc/armada38x-rtc
F: drivers/rtc/rtc-armada38x.c
ARM/Marvell Berlin SoC support
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
@ -1188,6 +1197,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
@ -1351,6 +1361,7 @@ F: drivers/i2c/busses/i2c-rk3x.c
F: drivers/*/*rockchip*
F: drivers/*/*/*rockchip*
F: sound/soc/rockchip/
N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
@ -1664,8 +1675,8 @@ F: drivers/misc/eeprom/at24.c
F: include/linux/platform_data/at24.h
ATA OVER ETHERNET (AOE) DRIVER
M: "Ed L. Cashin" <ecashin@coraid.com>
W: http://support.coraid.com/support/linux
M: "Ed L. Cashin" <ed.cashin@acm.org>
W: http://www.openaoe.org/
S: Supported
F: Documentation/aoe/
F: drivers/block/aoe/
@ -1730,7 +1741,7 @@ S: Maintained
F: drivers/net/ethernet/atheros/
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
M: Chas Williams <3chas3@gmail.com>
L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
@ -2065,7 +2076,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <j.vosburgh@gmail.com>
M: Veaceslav Falico <vfalico@gmail.com>
M: Andy Gospodarek <andy@greyhouse.net>
M: Andy Gospodarek <gospo@cumulusnetworks.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
@ -2107,7 +2118,6 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
@ -2369,8 +2379,9 @@ F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
@ -2386,7 +2397,7 @@ CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
@ -3241,6 +3252,13 @@ S: Maintained
F: Documentation/hwmon/dme1737
F: drivers/hwmon/dme1737.c
DMI/SMBIOS SUPPORT
M: Jean Delvare <jdelvare@suse.de>
S: Maintained
F: drivers/firmware/dmi-id.c
F: drivers/firmware/dmi_scan.c
F: include/linux/dmi.h
DOCKING STATION DRIVER
M: Shaohua Li <shaohua.li@intel.com>
L: linux-acpi@vger.kernel.org
@ -5076,7 +5094,7 @@ S: Supported
F: drivers/platform/x86/intel_menlow.c
INTEL IA32 MICROCODE UPDATE SUPPORT
M: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
M: Borislav Petkov <bp@alien8.de>
S: Maintained
F: arch/x86/kernel/cpu/microcode/core*
F: arch/x86/kernel/cpu/microcode/intel*
@ -5117,22 +5135,21 @@ M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/fm10k/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e/i40evf)
INTEL ETHERNET DRIVERS
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: Matthew Vick <matthew.vick@intel.com>
M: John Ronciak <john.ronciak@intel.com>
M: Mitch Williams <mitch.a.williams@intel.com>
M: Linux NICS <linux.nics@intel.com>
L: e1000-devel@lists.sourceforge.net
R: Jesse Brandeburg <jesse.brandeburg@intel.com>
R: Shannon Nelson <shannon.nelson@intel.com>
R: Carolyn Wyborny <carolyn.wyborny@intel.com>
R: Don Skidmore <donald.c.skidmore@intel.com>
R: Matthew Vick <matthew.vick@intel.com>
R: John Ronciak <john.ronciak@intel.com>
R: Mitch Williams <mitch.a.williams@intel.com>
L: intel-wired-lan@lists.osuosl.org
W: http://www.intel.com/support/feedback.htm
W: http://e1000.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
Q: http://patchwork.ozlabs.org/project/intel-wired-lan/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
@ -8480,6 +8497,14 @@ S: Supported
L: netdev@vger.kernel.org
F: drivers/net/ethernet/samsung/sxgbe/
SAMSUNG THERMAL DRIVER
M: Lukasz Majewski <l.majewski@samsung.com>
L: linux-pm@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
T: https://github.com/lmajewski/linux-samsung-thermal.git
F: drivers/thermal/samsung/
SAMSUNG USB2 PHY DRIVER
M: Kamil Debski <k.debski@samsung.com>
L: linux-kernel@vger.kernel.org
@ -10188,6 +10213,13 @@ S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OTG FSM (Finite State Machine)
M: Peter Chen <Peter.Chen@freescale.com>
T: git git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/common/usb-otg-fsm.c
USB OVER IP DRIVER
M: Valentina Manea <valentina.manea.m@gmail.com>
M: Shuah Khan <shuah.kh@samsung.com>

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc7
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

View File

@ -47,9 +47,6 @@ struct thread_struct {
/* Forward declaration, a strange C thing */
struct task_struct;
/* Return saved PC of a blocked thread */
unsigned long thread_saved_pc(struct task_struct *t);
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
@ -72,18 +69,21 @@ unsigned long thread_saved_pc(struct task_struct *t);
#define release_segments(mm) do { } while (0)
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
/*
* Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
* Look in process.c for details of kernel stack layout
*/
#define KSTK_ESP(tsk) (tsk->thread.ksp)
#define TSK_K_ESP(tsk) (tsk->thread.ksp)
#define KSTK_REG(tsk, off) (*((unsigned int *)(KSTK_ESP(tsk) + \
#define TSK_K_REG(tsk, off) (*((unsigned int *)(TSK_K_ESP(tsk) + \
sizeof(struct callee_regs) + off)))
#define KSTK_BLINK(tsk) KSTK_REG(tsk, 4)
#define KSTK_FP(tsk) KSTK_REG(tsk, 0)
#define TSK_K_BLINK(tsk) TSK_K_REG(tsk, 4)
#define TSK_K_FP(tsk) TSK_K_REG(tsk, 0)
#define thread_saved_pc(tsk) TSK_K_BLINK(tsk)
extern void start_thread(struct pt_regs * regs, unsigned long pc,
unsigned long usp);

View File

@ -0,0 +1,37 @@
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_STACKTRACE_H
#define __ASM_STACKTRACE_H
#include <linux/sched.h>
/**
* arc_unwind_core - Unwind the kernel mode stack for an execution context
* @tsk: NULL for current task, specific task otherwise
* @regs: pt_regs used to seed the unwinder {SP, FP, BLINK, PC}
* If NULL, use pt_regs of @tsk (if !NULL) otherwise
* use the current values of {SP, FP, BLINK, PC}
* @consumer_fn: Callback invoked for each frame unwound
* Returns 0 to continue unwinding, -1 to stop
* @arg: Arg to callback
*
* Returns the address of first function in stack
*
* Semantics:
* - synchronous unwinding (e.g. dump_stack): @tsk NULL, @regs NULL
* - Asynchronous unwinding of sleeping task: @tsk !NULL, @regs NULL
* - Asynchronous unwinding of intr/excp etc: @tsk !NULL, @regs !NULL
*/
notrace noinline unsigned int arc_unwind_core(
struct task_struct *tsk, struct pt_regs *regs,
int (*consumer_fn) (unsigned int, void *),
void *arg);
#endif /* __ASM_STACKTRACE_H */

View File

@ -192,29 +192,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
return 0;
}
/*
* API: expected by schedular Code: If thread is sleeping where is that.
* What is this good for? it will be always the scheduler or ret_from_fork.
* So we hard code that anyways.
*/
unsigned long thread_saved_pc(struct task_struct *t)
{
struct pt_regs *regs = task_pt_regs(t);
unsigned long blink = 0;
/*
* If the thread being queried for in not itself calling this, then it
* implies it is not executing, which in turn implies it is sleeping,
* which in turn implies it got switched OUT by the schedular.
* In that case, it's kernel mode blink can reliably retrieved as per
* the picture above (right above pt_regs).
*/
if (t != current && t->state != TASK_RUNNING)
blink = *((unsigned int *)regs - 1);
return blink;
}
int elf_check_arch(const struct elf32_hdr *x)
{
unsigned int eflags;

View File

@ -67,7 +67,7 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
sigset_t *set)
{
int err;
err = __copy_to_user(&(sf->uc.uc_mcontext.regs), regs,
err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), regs,
sizeof(sf->uc.uc_mcontext.regs.scratch));
err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
@ -83,7 +83,7 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
if (!err)
set_current_blocked(&set);
err |= __copy_from_user(regs, &(sf->uc.uc_mcontext.regs),
err |= __copy_from_user(regs, &(sf->uc.uc_mcontext.regs.scratch),
sizeof(sf->uc.uc_mcontext.regs.scratch));
return err;
@ -131,6 +131,15 @@ SYSCALL_DEFINE0(rt_sigreturn)
/* Don't restart from sigreturn */
syscall_wont_restart(regs);
/*
* Ensure that sigreturn always returns to user mode (in case the
* regs saved on user stack got fudged between save and sigreturn)
* Otherwise it is easy to panic the kernel with a custom
* signal handler and/or restorer which clobberes the status32/ret
* to return to a bogus location in kernel mode.
*/
regs->status32 |= STATUS_U_MASK;
return regs->r0;
badframe:
@ -229,8 +238,11 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
/*
* handler returns using sigreturn stub provided already by userpsace
* If not, nuke the process right away
*/
BUG_ON(!(ksig->ka.sa.sa_flags & SA_RESTORER));
if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
return 1;
regs->blink = (unsigned long)ksig->ka.sa.sa_restorer;
/* User Stack for signal handler will be above the frame just carved */
@ -296,12 +308,12 @@ static void
handle_signal(struct ksignal *ksig, struct pt_regs *regs)
{
sigset_t *oldset = sigmask_to_save();
int ret;
int failed;
/* Set up the stack frame */
ret = setup_rt_frame(ksig, oldset, regs);
failed = setup_rt_frame(ksig, oldset, regs);
signal_setup_done(ret, ksig, 0);
signal_setup_done(failed, ksig, 0);
}
void do_signal(struct pt_regs *regs)

View File

@ -43,6 +43,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
struct pt_regs *regs,
struct unwind_frame_info *frame_info)
{
/*
* synchronous unwinding (e.g. dump_stack)
* - uses current values of SP and friends
*/
if (tsk == NULL && regs == NULL) {
unsigned long fp, sp, blink, ret;
frame_info->task = current;
@ -61,12 +65,17 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->regs.r63 = ret;
frame_info->call_frame = 0;
} else if (regs == NULL) {
/*
* Asynchronous unwinding of sleeping task
* - Gets SP etc from task's pt_regs (saved bottom of kernel
* mode stack of task)
*/
frame_info->task = tsk;
frame_info->regs.r27 = KSTK_FP(tsk);
frame_info->regs.r28 = KSTK_ESP(tsk);
frame_info->regs.r31 = KSTK_BLINK(tsk);
frame_info->regs.r27 = TSK_K_FP(tsk);
frame_info->regs.r28 = TSK_K_ESP(tsk);
frame_info->regs.r31 = TSK_K_BLINK(tsk);
frame_info->regs.r63 = (unsigned int)__switch_to;
/* In the prologue of __switch_to, first FP is saved on stack
@ -83,6 +92,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->call_frame = 0;
} else {
/*
* Asynchronous unwinding of intr/exception
* - Just uses the pt_regs passed
*/
frame_info->task = tsk;
frame_info->regs.r27 = regs->fp;
@ -95,7 +108,7 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
#endif
static noinline unsigned int
notrace noinline unsigned int
arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
int (*consumer_fn) (unsigned int, void *), void *arg)
{

View File

@ -12,6 +12,7 @@
*/
#include <linux/types.h>
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <asm/disasm.h>
@ -253,6 +254,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
}
}
perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
return 0;
fault:

View File

@ -14,6 +14,7 @@
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/perf_event.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
@ -139,13 +140,20 @@ good_area:
return;
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (likely(!(fault & VM_FAULT_ERROR))) {
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/* To avoid updating stats twice for retry case */
if (fault & VM_FAULT_MAJOR)
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
else
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;

View File

@ -619,6 +619,7 @@ config ARCH_PXA
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select PLAT_PXA
select SPARSE_IRQ

View File

@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32

View File

@ -301,3 +301,11 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
};
&aes {
status = "okay";
};
&sham {
status = "okay";
};

View File

@ -24,11 +24,3 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};

View File

@ -328,6 +328,10 @@
dual_emac_res_vlan = <3>;
};
&phy_sel {
rmii-clock-ext;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;

View File

@ -99,7 +99,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -107,7 +107,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};

View File

@ -107,7 +107,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -123,7 +123,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
@ -131,7 +131,7 @@
ehrpwm3_tbclk: ehrpwm3_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
@ -139,7 +139,7 @@
ehrpwm4_tbclk: ehrpwm4_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
@ -147,7 +147,7 @@
ehrpwm5_tbclk: ehrpwm5_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};

View File

@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
@ -853,7 +853,7 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

View File

@ -124,11 +124,12 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
@ -262,7 +263,7 @@
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};

View File

@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
@ -856,7 +856,7 @@
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

View File

@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1301,7 +1300,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};

View File

@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

View File

@ -1066,7 +1066,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1186,7 +1185,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

View File

@ -36,6 +36,20 @@
>;
};
mmc_pins: pinmux_mmc_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
>;
};
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
@ -137,7 +151,12 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc_pins>;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */

View File

@ -150,17 +150,27 @@
};
gpio1: gpio@48032000 {
compatible = "ti,omap3-gpio";
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
ti,gpio-always-on;
reg = <0x48032000 0x1000>;
interrupts = <97>;
interrupts = <96>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@4804c000 {
compatible = "ti,omap3-gpio";
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
ti,gpio-always-on;
reg = <0x4804c000 0x1000>;
interrupts = <99>;
interrupts = <98>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {

View File

@ -263,17 +263,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
};

View File

@ -1111,7 +1111,6 @@
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie1-phy";
};
pcie2_phy: pciephy@4a095000 {
@ -1130,7 +1129,6 @@
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie2-phy";
status = "disabled";
};
};

View File

@ -119,17 +119,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};

View File

@ -243,10 +243,18 @@
ti,invert-autoidle-bit;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -309,10 +317,18 @@
clock-div = <1>;
};
dpll_dsp_byp_mux: dpll_dsp_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0240>;
};
dpll_dsp_ck: dpll_dsp_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
};
@ -335,10 +351,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -361,10 +385,18 @@
clock-div = <1>;
};
dpll_gpu_byp_mux: dpll_gpu_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02e4>;
};
dpll_gpu_ck: dpll_gpu_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
};
@ -398,10 +430,18 @@
clock-div = <1>;
};
dpll_ddr_byp_mux: dpll_ddr_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x021c>;
};
dpll_ddr_ck: dpll_ddr_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
};
@ -416,10 +456,18 @@
ti,invert-autoidle-bit;
};
dpll_gmac_byp_mux: dpll_gmac_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02b4>;
};
dpll_gmac_ck: dpll_gmac_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
};
@ -482,10 +530,18 @@
clock-div = <1>;
};
dpll_eve_byp_mux: dpll_eve_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0290>;
};
dpll_eve_ck: dpll_eve_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
};
@ -1249,10 +1305,18 @@
clock-div = <1>;
};
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -1275,10 +1339,18 @@
clock-div = <1>;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

View File

@ -18,6 +18,7 @@
*/
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@ -193,6 +194,7 @@
interrupts = <0 216 0>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
status = "disabled";
};

View File

@ -0,0 +1,52 @@
/*
* Device tree sources for Exynos4 thermal zone
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert1: cpu-alert-1 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
};
map1 {
trip = <&cpu_alert1>;
};
};
};
};
};

View File

@ -38,6 +38,7 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
csis0 = &csis_0;
csis1 = &csis_1;
fimc0 = &fimc_0;
@ -104,6 +105,7 @@
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
#power-domain-cells = <0>;
power-domains = <&pd_lcd0>;
};
pd_cam: cam-power-domain@10023C00 {
@ -554,6 +556,22 @@
status = "disabled";
};
i2c_8: i2c@138E0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
interrupts = <0 93 0>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
compatible = "exynos4210-hdmiphy";
reg = <0x38>;
};
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
@ -663,6 +681,33 @@
status = "disabled";
};
tmu: tmu@100C0000 {
#include "exynos4412-tmu-sensor-conf.dtsi"
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <0 92 0>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
phy = <&hdmi_i2c_phy>;
power-domains = <&pd_tv>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
interrupts = <0 91 0>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
status = "disabled";
};
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;

View File

@ -426,6 +426,25 @@
status = "okay";
};
tmu@100C0000 {
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 4 4>;
};
};
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;

View File

@ -505,6 +505,63 @@
assigned-clock-rates = <0>, <160000000>;
};
};
hdmi_en: voltage-regulator-hdmi-5v {
compatible = "regulator-fixed";
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpe0 1 0>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
gpios = <&gpe4 2 0 &gpe4 3 0>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&i2c_ddc_bus>;
pinctrl-names = "default";
status = "okay";
};
mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
vdd-supply = <&ldo3_reg>;
vdd_osc-supply = <&ldo4_reg>;
vdd_pll-supply = <&ldo3_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <0>;
};
};
&pinctrl_0 {
i2c_ddc_bus: i2c-ddc-bus {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&mdma1 {

View File

@ -21,6 +21,7 @@
#include "exynos4.dtsi"
#include "exynos4210-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
@ -35,10 +36,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@900 {
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
cooling-min-level = <4>;
cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@901 {
@ -153,16 +157,38 @@
reg = <0x03860000 0x1000>;
};
tmu@100C0000 {
tmu: tmu@100C0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
status = "disabled";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
};
};
};
};
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
@ -203,6 +229,14 @@
};
};
mixer: mixer@12C10000 {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
ppmu_lcd1: ppmu_lcd1@12240000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12240000 0x2000>;

View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

View File

@ -249,6 +249,20 @@
regulator-always-on;
};
ldo8_reg: ldo@8 {
regulator-compatible = "LDO8";
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: ldo@10 {
regulator-compatible = "LDO10";
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <1800000>;
@ -411,6 +425,51 @@
ehci: ehci@12580000 {
status = "okay";
};
tmu@100C0000 {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
mixer: mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
hdmi_ddc: i2c@13880000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
@ -425,4 +484,9 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <1>;
};
};

View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos4412 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <55>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <100>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

View File

@ -927,6 +927,21 @@
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
};
&pmu_system_controller {

View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

View File

@ -19,6 +19,7 @@
#include "exynos4.dtsi"
#include "exynos4x12-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
aliases {
@ -297,4 +298,15 @@
clock-names = "tmu_apbif";
status = "disabled";
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4212-hdmi";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4212-mixer";
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
};
};

View File

@ -20,7 +20,7 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
@ -58,11 +58,14 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
@ -102,6 +105,12 @@
#power-domain-cells = <0>;
};
pd_disp1: disp1-power-domain@100440A0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
@ -235,12 +244,32 @@
status = "disabled";
};
tmu@10060000 {
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
serial@12C00000 {
@ -719,6 +748,7 @@
hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@ -731,9 +761,11 @@
mixer {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
};
dp_phy: video-phy@10040720 {
@ -743,6 +775,7 @@
};
dp: dp-controller@145B0000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
@ -750,6 +783,7 @@
};
fimd: fimd@14400000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};

View File

@ -0,0 +1,35 @@
/*
* Device tree sources for default Exynos5420 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-1 {
temperature = <103000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1200000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

View File

@ -740,8 +740,9 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
};
@ -782,6 +783,7 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@ -790,6 +792,7 @@
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@ -798,6 +801,7 @@
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@ -806,6 +810,7 @@
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@ -814,6 +819,30 @@
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
watchdog: watchdog@101D0000 {

View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos5440 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <5>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <0x5d2d>;
samsung,tmu_min_efuse_value = <16>;
samsung,tmu_max_efuse_value = <76>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <70>;
samsung,tmu_default_temp_offset = <25>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

View File

@ -0,0 +1,25 @@
/*
* Device tree sources for default Exynos5440 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <100000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1050000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

View File

@ -219,6 +219,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_1: tmuctrl@16011C {
@ -227,6 +228,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_2: tmuctrl@160120 {
@ -235,6 +237,22 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmuctrl_0>;
#include "exynos5440-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmuctrl_1>;
#include "exynos5440-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmuctrl_2>;
#include "exynos5440-trip-points.dtsi"
};
};
sata@210000 {

View File

@ -35,6 +35,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_h1_vbus: regulator@1 {
@ -45,6 +46,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 29 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_audio: regulator@2 {

View File

@ -52,6 +52,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 0 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_otg2_vbus: regulator@1 {
@ -62,6 +63,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_aud3v: regulator@2 {

View File

@ -92,6 +92,8 @@
ti,hwmods = "aes";
reg = <0x480c5000 0x50>;
interrupts = <0>;
dmas = <&sdma 65 &sdma 66>;
dma-names = "tx", "rx";
};
prm: prm@48306000 {
@ -550,6 +552,8 @@
ti,hwmods = "sham";
reg = <0x480c3000 0x64>;
interrupts = <49>;
dmas = <&sdma 69>;
dma-names = "rx";
};
smartreflex_core: smartreflex@480cb000 {

View File

@ -13,7 +13,7 @@
core_thermal: core_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 2>;

View File

@ -13,7 +13,7 @@
gpu_thermal: gpu_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 1>;

View File

@ -1079,4 +1079,8 @@
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
};
/include/ "omap54xx-clocks.dtsi"

View File

@ -167,10 +167,18 @@
ti,index-starts-at-one;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -294,10 +302,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -599,10 +615,19 @@
};
};
&cm_core_clocks {
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -714,10 +739,18 @@
ti,index-starts-at-one;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

View File

@ -411,6 +411,7 @@
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
status = "disabled";
};
usb_host0_ehci: usb@ff500000 {

View File

@ -1248,7 +1248,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1416,7 +1415,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

View File

@ -66,6 +66,7 @@
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
@ -259,7 +260,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
@ -461,8 +462,8 @@
lcdck: lcdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
@ -770,7 +771,7 @@
reg = <50>;
};
lcd_clk: lcd_clk {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};

View File

@ -660,7 +660,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff01000 0x1000>;
interrupts = <0 156 4>;
interrupts = <0 155 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
status = "disabled";
@ -713,6 +713,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
};
uart1: serial1@ffc03000 {
@ -722,6 +725,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
};
rst: rstmgr@ffd05000 {

View File

@ -56,6 +56,22 @@
model = "Olimex A10-OLinuXino-LIME";
compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
cpus {
cpu0: cpu@0 {
/*
* The A10-Lime is known to be unstable
* when running at 1008 MHz
*/
operating-points = <
/* kHz uV */
912000 1350000
864000 1300000
624000 1250000
>;
cooling-max-level = <2>;
};
};
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";

View File

@ -75,7 +75,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1056000 1500000
1008000 1400000
912000 1350000
864000 1300000
@ -83,7 +82,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <4>;
cooling-max-level = <3>;
};
};

View File

@ -47,7 +47,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1104000 1500000
1008000 1400000
912000 1350000
864000 1300000
@ -57,7 +56,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <6>;
cooling-max-level = <5>;
};
};

View File

@ -105,7 +105,6 @@
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
1008000 1450000
960000 1400000
912000 1400000
864000 1300000
@ -116,7 +115,7 @@
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <7>;
cooling-max-level = <6>;
};
cpu@1 {

View File

@ -70,6 +70,7 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y

View File

@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
CONFIG_CMA=y
CONFIG_ARM_APPENDED_DTB=y

View File

@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set

View File

@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y

View File

@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y

View File

@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1760=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y

View File

@ -58,14 +58,18 @@
# define VFP_ABI_FRAME 0
# define BSAES_ASM_EXTENDED_KEY
# define XTS_CHAIN_TWEAK
# define __ARM_ARCH__ 7
# define __ARM_ARCH__ __LINUX_ARM_ARCH__
# define __ARM_MAX_ARCH__ 7
#endif
#ifdef __thumb__
# define adrl adr
#endif
#if __ARM_ARCH__>=7
#if __ARM_MAX_ARCH__>=7
.arch armv7-a
.fpu neon
.text
.syntax unified @ ARMv7-capable assembler is expected to handle this
#ifdef __thumb2__
@ -74,8 +78,6 @@
.code 32
#endif
.fpu neon
.type _bsaes_decrypt8,%function
.align 4
_bsaes_decrypt8:
@ -2095,9 +2097,11 @@ bsaes_xts_decrypt:
vld1.8 {q8}, [r0] @ initial tweak
adr r2, .Lxts_magic
#ifndef XTS_CHAIN_TWEAK
tst r9, #0xf @ if not multiple of 16
it ne @ Thumb2 thing, sanity check in ARM
subne r9, #0x10 @ subtract another 16 bytes
#endif
subs r9, #0x80
blo .Lxts_dec_short

View File

@ -701,14 +701,18 @@ $code.=<<___;
# define VFP_ABI_FRAME 0
# define BSAES_ASM_EXTENDED_KEY
# define XTS_CHAIN_TWEAK
# define __ARM_ARCH__ 7
# define __ARM_ARCH__ __LINUX_ARM_ARCH__
# define __ARM_MAX_ARCH__ 7
#endif
#ifdef __thumb__
# define adrl adr
#endif
#if __ARM_ARCH__>=7
#if __ARM_MAX_ARCH__>=7
.arch armv7-a
.fpu neon
.text
.syntax unified @ ARMv7-capable assembler is expected to handle this
#ifdef __thumb2__
@ -717,8 +721,6 @@ $code.=<<___;
.code 32
#endif
.fpu neon
.type _bsaes_decrypt8,%function
.align 4
_bsaes_decrypt8:
@ -2076,9 +2078,11 @@ bsaes_xts_decrypt:
vld1.8 {@XMM[8]}, [r0] @ initial tweak
adr $magic, .Lxts_magic
#ifndef XTS_CHAIN_TWEAK
tst $len, #0xf @ if not multiple of 16
it ne @ Thumb2 thing, sanity check in ARM
subne $len, #0x10 @ subtract another 16 bytes
#endif
subs $len, #0x80
blo .Lxts_dec_short

View File

@ -149,31 +149,30 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
(__boundary - 1 < (end) - 1)? __boundary: (end); \
})
#define kvm_pgd_index(addr) pgd_index(addr)
static inline bool kvm_page_empty(void *ptr)
{
struct page *ptr_page = virt_to_page(ptr);
return page_count(ptr_page) == 1;
}
#define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep)
#define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp)
#define kvm_pud_table_empty(kvm, pudp) (0)
#define KVM_PREALLOC_LEVEL 0
static inline int kvm_prealloc_hwpgd(struct kvm *kvm, pgd_t *pgd)
{
return 0;
}
static inline void kvm_free_hwpgd(struct kvm *kvm) { }
static inline void *kvm_get_hwpgd(struct kvm *kvm)
{
return kvm->arch.pgd;
}
static inline unsigned int kvm_get_hwpgd_size(void)
{
return PTRS_PER_S2_PGD * sizeof(pgd_t);
}
struct kvm;
#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l))
@ -207,7 +206,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
VM_BUG_ON(size & PAGE_MASK);
VM_BUG_ON(size & ~PAGE_MASK);
if (!need_flush && !icache_is_pipt())
goto vipt_cache;

View File

@ -18,8 +18,11 @@
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
/* Keep in sync with mach-at91/include/mach/hardware.h */
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */

View File

@ -246,12 +246,9 @@ static int __get_cpu_architecture(void)
if (cpu_arch)
cpu_arch += CPU_ARCH_ARMv3;
} else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
unsigned int mmfr0;
/* Revised CPUID format. Read the Memory Model Feature
* Register 0 and check for VMSAv7 or PMSAv7 */
asm("mrc p15, 0, %0, c0, c1, 4"
: "=r" (mmfr0));
unsigned int mmfr0 = read_cpuid_ext(CPUID_EXT_MMFR0);
if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
(mmfr0 & 0x000000f0) >= 0x00000030)
cpu_arch = CPU_ARCH_ARMv7;

View File

@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
vcpu->mode = OUTSIDE_GUEST_MODE;
kvm_guest_exit();
trace_kvm_exit(*vcpu_pc(vcpu));
trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still

View File

@ -290,7 +290,7 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
phys_addr_t addr = start, end = start + size;
phys_addr_t next;
pgd = pgdp + pgd_index(addr);
pgd = pgdp + kvm_pgd_index(addr);
do {
next = kvm_pgd_addr_end(addr, end);
if (!pgd_none(*pgd))
@ -355,7 +355,7 @@ static void stage2_flush_memslot(struct kvm *kvm,
phys_addr_t next;
pgd_t *pgd;
pgd = kvm->arch.pgd + pgd_index(addr);
pgd = kvm->arch.pgd + kvm_pgd_index(addr);
do {
next = kvm_pgd_addr_end(addr, end);
stage2_flush_puds(kvm, pgd, addr, next);
@ -632,6 +632,20 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
__phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
}
/* Free the HW pgd, one page at a time */
static void kvm_free_hwpgd(void *hwpgd)
{
free_pages_exact(hwpgd, kvm_get_hwpgd_size());
}
/* Allocate the HW PGD, making sure that each page gets its own refcount */
static void *kvm_alloc_hwpgd(void)
{
unsigned int size = kvm_get_hwpgd_size();
return alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
}
/**
* kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation.
* @kvm: The KVM struct pointer for the VM.
@ -645,15 +659,31 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
*/
int kvm_alloc_stage2_pgd(struct kvm *kvm)
{
int ret;
pgd_t *pgd;
void *hwpgd;
if (kvm->arch.pgd != NULL) {
kvm_err("kvm_arch already initialized?\n");
return -EINVAL;
}
hwpgd = kvm_alloc_hwpgd();
if (!hwpgd)
return -ENOMEM;
/* When the kernel uses more levels of page tables than the
* guest, we allocate a fake PGD and pre-populate it to point
* to the next-level page table, which will be the real
* initial page table pointed to by the VTTBR.
*
* When KVM_PREALLOC_LEVEL==2, we allocate a single page for
* the PMD and the kernel will use folded pud.
* When KVM_PREALLOC_LEVEL==1, we allocate 2 consecutive PUD
* pages.
*/
if (KVM_PREALLOC_LEVEL > 0) {
int i;
/*
* Allocate fake pgd for the page table manipulation macros to
* work. This is not used by the hardware and we have no
@ -661,30 +691,32 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
*/
pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t),
GFP_KERNEL | __GFP_ZERO);
if (!pgd) {
kvm_free_hwpgd(hwpgd);
return -ENOMEM;
}
/* Plug the HW PGD into the fake one. */
for (i = 0; i < PTRS_PER_S2_PGD; i++) {
if (KVM_PREALLOC_LEVEL == 1)
pgd_populate(NULL, pgd + i,
(pud_t *)hwpgd + i * PTRS_PER_PUD);
else if (KVM_PREALLOC_LEVEL == 2)
pud_populate(NULL, pud_offset(pgd, 0) + i,
(pmd_t *)hwpgd + i * PTRS_PER_PMD);
}
} else {
/*
* Allocate actual first-level Stage-2 page table used by the
* hardware for Stage-2 page table walks.
*/
pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, S2_PGD_ORDER);
pgd = (pgd_t *)hwpgd;
}
if (!pgd)
return -ENOMEM;
ret = kvm_prealloc_hwpgd(kvm, pgd);
if (ret)
goto out_err;
kvm_clean_pgd(pgd);
kvm->arch.pgd = pgd;
return 0;
out_err:
if (KVM_PREALLOC_LEVEL > 0)
kfree(pgd);
else
free_pages((unsigned long)pgd, S2_PGD_ORDER);
return ret;
}
/**
@ -785,11 +817,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
return;
unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
kvm_free_hwpgd(kvm);
kvm_free_hwpgd(kvm_get_hwpgd(kvm));
if (KVM_PREALLOC_LEVEL > 0)
kfree(kvm->arch.pgd);
else
free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER);
kvm->arch.pgd = NULL;
}
@ -799,7 +830,7 @@ static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache
pgd_t *pgd;
pud_t *pud;
pgd = kvm->arch.pgd + pgd_index(addr);
pgd = kvm->arch.pgd + kvm_pgd_index(addr);
if (WARN_ON(pgd_none(*pgd))) {
if (!cache)
return NULL;
@ -1089,7 +1120,7 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
pgd_t *pgd;
phys_addr_t next;
pgd = kvm->arch.pgd + pgd_index(addr);
pgd = kvm->arch.pgd + kvm_pgd_index(addr);
do {
/*
* Release kvm_mmu_lock periodically if the memory region is

View File

@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
);
TRACE_EVENT(kvm_exit,
TP_PROTO(unsigned long vcpu_pc),
TP_ARGS(vcpu_pc),
TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
TP_ARGS(exit_reason, vcpu_pc),
TP_STRUCT__entry(
__field( unsigned int, exit_reason )
__field( unsigned long, vcpu_pc )
),
TP_fast_assign(
__entry->exit_reason = exit_reason;
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
__entry->exit_reason,
__entry->vcpu_pc)
);
TRACE_EVENT(kvm_guest_fault,

View File

@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void)
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
struct platform_device *pdev;
struct platform_device *pdev = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find sram node!\n", __func__);
return;
for_each_compatible_node(node, NULL, "mmio-sram") {
pdev = of_find_device_by_node(node);
if (pdev) {
of_node_put(node);
break;
}
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
goto put_node;
return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
goto put_node;
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
goto put_node;
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
put_node:
of_node_put(node);
}
#endif

View File

@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}

View File

@ -25,11 +25,6 @@
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
pmc .req r0
sdramc .req r1
ramc1 .req r2
@ -41,60 +36,42 @@ tmp2 .req r5
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov tmp2, #MCKRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov tmp2, #MOSCRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov tmp2, #PLLALOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov tmp2, #PLLBLOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
.arm
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
@ -134,6 +111,16 @@ ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
str tmp1, .saved_sam9_mdr
bic tmp1, tmp1, #~AT91_DDRSDRC_MD
cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
biceq tmp1, tmp1, #AT91_DDRSDRC_MD
orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
@ -142,14 +129,26 @@ ddr_sr_enable:
/* figure out if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
strne tmp2, .saved_sam9_lpr1
bicne tmp2, #AT91_DDRSDRC_LPCB
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
beq ddr_no_2nd_ctrl
ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
str tmp2, .saved_sam9_mdr1
bic tmp2, tmp2, #~AT91_DDRSDRC_MD
cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
biceq tmp2, tmp2, #AT91_DDRSDRC_MD
orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
str tmp2, .saved_sam9_lpr1
bic tmp2, #AT91_DDRSDRC_LPCB
orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
@ -208,6 +207,7 @@ sdr_sr_done:
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
@ -216,6 +216,7 @@ sdr_sr_done:
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
@ -280,12 +281,17 @@ sdr_sr_done:
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore MDR in case of LPDDR1 */
ldr tmp1, .saved_sam9_mdr
str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_mdr1
strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
@ -319,5 +325,11 @@ ram_restored:
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock

View File

@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*/
void exynos_cpu_power_down(int cpu)
{
if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
of_machine_is_compatible("samsung,exynos5800"))) {
if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
/*
* Bypass power down for CPU0 during suspend. Check for
* the SYS_PWR_REG value to decide if we are suspending

View File

@ -161,6 +161,34 @@ no_clk:
of_genpd_add_provider_simple(np, &pd->pd);
}
/* Assign the child power domains to their parents */
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct generic_pm_domain *child_domain, *parent_domain;
struct of_phandle_args args;
args.np = np;
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (!child_domain)
continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
continue;
parent_domain = of_genpd_get_from_provider(&args);
if (!parent_domain)
continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
parent_domain->name, child_domain->name);
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
of_node_put(np);
}
return 0;
}
arch_initcall(exynos4_pm_init_power_domain);

View File

@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
{ 73, BIT(1) }, /* RTC alarm */
{ 74, BIT(2) }, /* RTC tick */
{ 105, BIT(1) }, /* RTC alarm */
{ 106, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};

View File

@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
* (external OSC), and we need to clear the bit.
*/
clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
clksel = clk_is_match(ptp_clk, enet_ref) ?
IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1,

Some files were not shown because too many files have changed in this diff Show More