dt-bindings: power: supply: bq24735: Convert to DT schema format
Convert the binding to DT schema format. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Sebastian Reichel
Sebastian Reichel
parent
9c05cfaf3f
commit
464a748871
|
|
@ -0,0 +1,89 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: Binding for TI BQ24735 Li-Ion Battery Charger
|
||||
|
||||
maintainers:
|
||||
- Sebastian Reichel <sre@kernel.org>
|
||||
|
||||
allOf:
|
||||
- $ref: power-supply.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,bq24735
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
description: AC adapter plug event interrupt
|
||||
maxItems: 1
|
||||
|
||||
ti,ac-detect-gpios:
|
||||
maxItems: 1
|
||||
description: |
|
||||
This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
|
||||
that is configured as an input and connected to the ACOK pin on the bq24735.
|
||||
Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
|
||||
absence despite ACOK being active (high) on AC adapter presence.
|
||||
|
||||
ti,charge-current:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Used to control and set the charging current.
|
||||
This value must be between 128mA and 8.128A with a 64mA step resolution.
|
||||
The POR value is 0x0000h. This number is in mA (e.g. 8192).
|
||||
See spec for more information about the ChargeCurrent (0x14h) register.
|
||||
|
||||
ti,charge-voltage:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Used to control and set the charging voltage.
|
||||
This value must be between 1.024V and 19.2V with a 16mV step resolution.
|
||||
The POR value is 0x0000h. This number is in mV (e.g. 19200).
|
||||
See spec for more information about the ChargeVoltage (0x15h) register.
|
||||
|
||||
ti,input-current:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Used to control and set the charger input current.
|
||||
This value must be between 128mA and 8.064A with a 128mA step resolution.
|
||||
The POR value is 0x1000h. This number is in mA (e.g. 8064).
|
||||
See the spec for more information about the InputCurrent (0x3fh) register.
|
||||
|
||||
ti,external-control:
|
||||
type: boolean
|
||||
description: |
|
||||
Indicates that the charger is configured externally and that the host should not
|
||||
attempt to enable/disable charging or set the charge voltage/current.
|
||||
|
||||
poll-interval:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
charger@9 {
|
||||
compatible = "ti,bq24735";
|
||||
reg = <0x9>;
|
||||
ti,ac-detect-gpios = <&gpio 72 0x1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,39 +0,0 @@
|
|||
TI BQ24735 Charge Controller
|
||||
~~~~~~~~~~
|
||||
|
||||
Required properties :
|
||||
- compatible : "ti,bq24735"
|
||||
|
||||
Optional properties :
|
||||
- interrupts : Specify the interrupt to be used to trigger when the AC
|
||||
adapter is either plugged in or removed.
|
||||
- ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
|
||||
status. This is a Host GPIO that is configured as an input and connected
|
||||
to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
|
||||
the GPIO must be active on AC adapter absence despite ACOK being active
|
||||
(high) on AC adapter presence.
|
||||
- ti,charge-current : Used to control and set the charging current. This value
|
||||
must be between 128mA and 8.128A with a 64mA step resolution. The POR value
|
||||
is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
|
||||
about the ChargeCurrent (0x14h) register.
|
||||
- ti,charge-voltage : Used to control and set the charging voltage. This value
|
||||
must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
|
||||
is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
|
||||
about the ChargeVoltage (0x15h) register.
|
||||
- ti,input-current : Used to control and set the charger input current. This
|
||||
value must be between 128mA and 8.064A with a 128mA step resolution. The
|
||||
POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
|
||||
more information about the InputCurrent (0x3fh) register.
|
||||
- ti,external-control : Indicates that the charger is configured externally
|
||||
and that the host should not attempt to enable/disable charging or set the
|
||||
charge voltage/current.
|
||||
- poll-interval : In case 'interrupts' is not specified, poll AC adapter
|
||||
presence with this interval (milliseconds).
|
||||
|
||||
Example:
|
||||
|
||||
bq24735@9 {
|
||||
compatible = "ti,bq24735";
|
||||
reg = <0x9>;
|
||||
ti,ac-detect-gpios = <&gpio 72 0x1>;
|
||||
}
|
||||
Loading…
Reference in New Issue