diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9605db70e671..4cf30e4de653 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -796,6 +796,26 @@ unsigned int sysctl_sched_uclamp_util_max = SCHED_CAPACITY_SCALE; /* All clamps are required to be less or equal than these values */ static struct uclamp_se uclamp_default[UCLAMP_CNT]; +/* + * This static key is used to reduce the uclamp overhead in the fast path. It + * primarily disables the call to uclamp_rq_{inc, dec}() in + * enqueue/dequeue_task(). + * + * This allows users to continue to enable uclamp in their kernel config with + * minimum uclamp overhead in the fast path. + * + * As soon as userspace modifies any of the uclamp knobs, the static key is + * enabled, since we have an actual users that make use of uclamp + * functionality. + * + * The knobs that would enable this static key are: + * + * * A task modifying its uclamp value with sched_setattr(). + * * An admin modifying the sysctl_sched_uclamp_{min, max} via procfs. + * * An admin modifying the cgroup cpu.uclamp.{min, max} + */ +DEFINE_STATIC_KEY_FALSE(sched_uclamp_used); + /* Integer rounded range for each bucket */ #define UCLAMP_BUCKET_DELTA DIV_ROUND_CLOSEST(SCHED_CAPACITY_SCALE, UCLAMP_BUCKETS) @@ -992,10 +1012,38 @@ static inline void uclamp_rq_dec_id(struct rq *rq, struct task_struct *p, lockdep_assert_held(&rq->lock); + /* + * If sched_uclamp_used was enabled after task @p was enqueued, + * we could end up with unbalanced call to uclamp_rq_dec_id(). + * + * In this case the uc_se->active flag should be false since no uclamp + * accounting was performed at enqueue time and we can just return + * here. + * + * Need to be careful of the following enqeueue/dequeue ordering + * problem too + * + * enqueue(taskA) + * // sched_uclamp_used gets enabled + * enqueue(taskB) + * dequeue(taskA) + * // Must not decrement bukcet->tasks here + * dequeue(taskB) + * + * where we could end up with stale data in uc_se and + * bucket[uc_se->bucket_id]. + * + * The following check here eliminates the possibility of such race. + */ + if (unlikely(!uc_se->active)) + return; + bucket = &uc_rq->bucket[uc_se->bucket_id]; + SCHED_WARN_ON(!bucket->tasks); if (likely(bucket->tasks)) bucket->tasks--; + uc_se->active = false; /* @@ -1023,6 +1071,15 @@ static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p) { enum uclamp_id clamp_id; + /* + * Avoid any overhead until uclamp is actually used by the userspace. + * + * The condition is constructed such that a NOP is generated when + * sched_uclamp_used is disabled. + */ + if (!static_branch_unlikely(&sched_uclamp_used)) + return; + if (unlikely(!p->sched_class->uclamp_enabled)) return; @@ -1038,6 +1095,15 @@ static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p) { enum uclamp_id clamp_id; + /* + * Avoid any overhead until uclamp is actually used by the userspace. + * + * The condition is constructed such that a NOP is generated when + * sched_uclamp_used is disabled. + */ + if (!static_branch_unlikely(&sched_uclamp_used)) + return; + if (unlikely(!p->sched_class->uclamp_enabled)) return; @@ -1146,8 +1212,10 @@ int sysctl_sched_uclamp_handler(struct ctl_table *table, int write, update_root_tg = true; } - if (update_root_tg) + if (update_root_tg) { + static_branch_enable(&sched_uclamp_used); uclamp_update_root_tg(); + } /* * We update all RUNNABLE tasks only when task groups are in use. @@ -1212,6 +1280,8 @@ static void __setscheduler_uclamp(struct task_struct *p, if (likely(!(attr->sched_flags & SCHED_FLAG_UTIL_CLAMP))) return; + static_branch_enable(&sched_uclamp_used); + if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN) { uclamp_se_set(&p->uclamp_req[UCLAMP_MIN], attr->sched_util_min, true); @@ -7436,6 +7506,8 @@ static ssize_t cpu_uclamp_write(struct kernfs_open_file *of, char *buf, if (req.ret) return req.ret; + static_branch_enable(&sched_uclamp_used); + mutex_lock(&uclamp_mutex); rcu_read_lock(); diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 7fbaee24c824..dc6835bc6490 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -210,7 +210,7 @@ unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, unsigned long dl_util, util, irq; struct rq *rq = cpu_rq(cpu); - if (!IS_BUILTIN(CONFIG_UCLAMP_TASK) && + if (!uclamp_is_used() && type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { return max; } diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 9bef2dd01247..b1432f608061 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -878,6 +878,8 @@ struct uclamp_rq { unsigned int value; struct uclamp_bucket bucket[UCLAMP_BUCKETS]; }; + +DECLARE_STATIC_KEY_FALSE(sched_uclamp_used); #endif /* CONFIG_UCLAMP_TASK */ /* @@ -2365,12 +2367,35 @@ static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {} #ifdef CONFIG_UCLAMP_TASK unsigned long uclamp_eff_value(struct task_struct *p, enum uclamp_id clamp_id); +/** + * uclamp_rq_util_with - clamp @util with @rq and @p effective uclamp values. + * @rq: The rq to clamp against. Must not be NULL. + * @util: The util value to clamp. + * @p: The task to clamp against. Can be NULL if you want to clamp + * against @rq only. + * + * Clamps the passed @util to the max(@rq, @p) effective uclamp values. + * + * If sched_uclamp_used static key is disabled, then just return the util + * without any clamping since uclamp aggregation at the rq level in the fast + * path is disabled, rendering this operation a NOP. + * + * Use uclamp_eff_value() if you don't care about uclamp values at rq level. It + * will return the correct effective uclamp value of the task even if the + * static key is disabled. + */ static __always_inline unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util, struct task_struct *p) { - unsigned long min_util = READ_ONCE(rq->uclamp[UCLAMP_MIN].value); - unsigned long max_util = READ_ONCE(rq->uclamp[UCLAMP_MAX].value); + unsigned long min_util; + unsigned long max_util; + + if (!static_branch_likely(&sched_uclamp_used)) + return util; + + min_util = READ_ONCE(rq->uclamp[UCLAMP_MIN].value); + max_util = READ_ONCE(rq->uclamp[UCLAMP_MAX].value); if (p) { min_util = max(min_util, uclamp_eff_value(p, UCLAMP_MIN)); @@ -2387,6 +2412,19 @@ unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util, return clamp(util, min_util, max_util); } + +/* + * When uclamp is compiled in, the aggregation at rq level is 'turned off' + * by default in the fast path and only gets turned on once userspace performs + * an operation that requires it. + * + * Returns true if userspace opted-in to use uclamp and aggregation at rq level + * hence is active. + */ +static inline bool uclamp_is_used(void) +{ + return static_branch_likely(&sched_uclamp_used); +} #else /* CONFIG_UCLAMP_TASK */ static inline unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util, @@ -2394,6 +2432,11 @@ unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util, { return util; } + +static inline bool uclamp_is_used(void) +{ + return false; +} #endif /* CONFIG_UCLAMP_TASK */ #ifdef arch_scale_freq_capacity