pwm: sifive: Simplify offset calculation for PWMCMP registers

[ Upstream commit 20550a6188 ]

Instead of explicitly using PWM_SIFIVE_PWMCMP0 + pwm->hwpwm *
PWM_SIFIVE_SIZE_PWMCMP for each access to one of the PWMCMP registers,
introduce a macro that takes the hwpwm id as parameter.

For the register definition using a plain 4 instead of the cpp constant
PWM_SIFIVE_SIZE_PWMCMP is easier to read, so define the offset macro
without the constant. The latter can then be dropped as there are no
users left.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Uwe Kleine-König 2022-07-21 12:31:23 +02:00 committed by Greg Kroah-Hartman
parent 6d7f7ffbcd
commit 47902de24a

View file

@ -23,7 +23,7 @@
#define PWM_SIFIVE_PWMCFG 0x0
#define PWM_SIFIVE_PWMCOUNT 0x8
#define PWM_SIFIVE_PWMS 0x10
#define PWM_SIFIVE_PWMCMP0 0x20
#define PWM_SIFIVE_PWMCMP(i) (0x20 + 4 * (i))
/* PWMCFG fields */
#define PWM_SIFIVE_PWMCFG_SCALE GENMASK(3, 0)
@ -36,8 +36,6 @@
#define PWM_SIFIVE_PWMCFG_GANG BIT(24)
#define PWM_SIFIVE_PWMCFG_IP BIT(28)
/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */
#define PWM_SIFIVE_SIZE_PWMCMP 4
#define PWM_SIFIVE_CMPWIDTH 16
#define PWM_SIFIVE_DEFAULT_PERIOD 10000000
@ -112,8 +110,7 @@ static void pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
u32 duty, val;
duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP0 +
pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
state->enabled = duty > 0;
@ -194,8 +191,7 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
pwm_sifive_update_clock(ddata, clk_get_rate(ddata->clk));
}
writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP0 +
pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
if (state->enabled != enabled)
pwm_sifive_enable(chip, state->enabled);