From ece9528e5f88cee11303fceefe39382f1030cd4e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 12 Jul 2011 08:18:15 -0700 Subject: [PATCH 001/692] gpio/omap: replace MOD_REG_BIT macro with static inline This macro is ugly and confusing, especially since it passes in most arguments, but uses an implied 'base' from the caller. Replace it with an equivalent static inline. Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 54 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0599854e2217..34a7110d9bc8 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -148,13 +148,17 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; } -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) +static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) +{ + int l = __raw_readl(base + reg); + + if (set) + l |= mask; + else + l &= ~mask; + + __raw_writel(l, base + reg); +} /** * _set_gpio_debounce - low level gpio debounce time @@ -210,28 +214,28 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); + _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge From 832337490f22987a1b739ba840e105c0c9af01bc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Mon, 18 Jul 2011 07:43:14 -0700 Subject: [PATCH 002/692] gpio/omap: check return value from irq_alloc_generic_chip Ensure return value of irq_alloc_generic_chip() is checked before continuing on to use it. Signed-off-by: Todd Poynor Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 34a7110d9bc8..f0208a958185 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1090,6 +1090,11 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, handle_simple_irq); + if (!gc) { + dev_err(bank->dev, "Memory alloc failed for gc\n"); + return; + } + ct = gc->chip_types; /* NOTE: No ack required, reading IRQ status clears it. */ From a78f6787a3dd7223bf185895fdcea661b408dc0a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:18:08 +0000 Subject: [PATCH 003/692] DocBook/drm: Eradicate inappropriate uses of the future tense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 50 +++++++++++++++++----------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c27915893974..0527ff2be37e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -57,10 +57,10 @@ existing drivers. - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. @@ -74,7 +74,7 @@ The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. @@ -155,7 +155,7 @@ In the example above, taken from the i915 DRM driver, the driver sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + We go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -315,7 +315,7 @@ Configuring the device - Obviously, device configuration will be device specific. + Obviously, device configuration is device specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -326,7 +326,7 @@ drm_get_resource_len() can be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note you probably want a drm_local_map_t in your driver private structure to track any mappings you create. @@ -357,7 +357,7 @@ - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -389,7 +389,7 @@ should support a memory manager. - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize it depends on which memory manager you're using, TTM or GEM. @@ -430,13 +430,13 @@ have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and - release routines, which will probably eventually call + release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release respectively. Once your global TTM accounting structure is set up and initialized (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + just created), you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, @@ -455,8 +455,8 @@ than TTM, but has no VRAM management capability. Core GEM initialization is comprised of a basic drm_mm_init call to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following basic GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the @@ -464,16 +464,16 @@ be initialized separately into its own DRM MM object. - Initialization will be driver specific, and will depend on + Initialization is driver specific, and depends on the architecture of the device. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -616,7 +616,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, + vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). @@ -632,8 +632,8 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. @@ -699,14 +699,14 @@ void intel_crt_init(struct drm_device *dev) performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + blocks the client and waits for rendering to complete before performing any necessary flushing operations). Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + and submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding @@ -767,7 +767,7 @@ void intel_crt_init(struct drm_device *dev) In order to set a mode on a given CRTC, encoder and connector configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) + provides a source of pixels for the CRTC to deliver to the encoder(s) and ultimately the connector(s) in the configuration. A framebuffer is fundamentally a driver specific memory object, made into an opaque handle by the DRM addfb function. Once an fb has been created this @@ -789,7 +789,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -823,7 +823,7 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + level info, since man pages should cover the rest. From f11aca045c165b9d4c9c4fce29f51ec24bcf64d3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:21:31 +0000 Subject: [PATCH 004/692] DocBook/drm: can -> may Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0527ff2be37e..b9079386040d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. @@ -293,12 +293,12 @@ can be used for tracking various device specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv + driver may simply allocate one and set drm_device.dev_priv appropriately; at unload the driver can free it and set drm_device.dev_priv to NULL. - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -323,7 +323,7 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len() may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new mapping for the BAR in question. Note you probably want a @@ -335,12 +335,12 @@ if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for @@ -440,7 +440,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, + driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and ttm_bo_global_release, respectively. Also like the previous object, ttm_global_item_ref is used to create an initial reference @@ -483,7 +483,7 @@ - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). @@ -572,7 +572,7 @@ void intel_crt_init(struct drm_device *dev) devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. @@ -637,7 +637,7 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register can simply use an + Devices that don't provide a count register may simply use an internal atomic counter incremented on every vertical blank interrupt, and can make their enable and disable vblank functions into no-ops. From 0c54781bc5aaec1e23bc50a4ef757b8e8bfc693b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:55:54 +0000 Subject: [PATCH 005/692] DocBook/drm: Clean up code comment Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b9079386040d..4ddc99928668 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -88,8 +88,8 @@ static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ce045a8cf82c..acf4ea84c801 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -785,8 +785,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ From 2c267e9e016da3e19a95261875a5f3b19dd6e9f6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:10:12 +0000 Subject: [PATCH 006/692] DocBook/drm: Use a semicolon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 4ddc99928668..aa13e0883510 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -154,8 +154,8 @@ In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -647,8 +647,8 @@ void intel_crt_init(struct drm_device *dev) Memory management - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL pbuffers. The DRM currently contains two memory managers, TTM and GEM. From 02391f1fe7b4e5434e4c558dcae99b9368c84bf3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:20:54 +0000 Subject: [PATCH 007/692] DocBook/drm: a -> an Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index aa13e0883510..5b815b83c30b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -203,7 +203,7 @@ DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler, DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). From b1f95bdc1eb10e3d3c8a85b2f0bc08fa6c08ae5d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:21:29 +0000 Subject: [PATCH 008/692] DocBook/drm: , -> . Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 5b815b83c30b..a0f0f984f04f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -204,7 +204,7 @@ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). From 80c84e6f3c2c707ccb5d7b500e25bda69f0e1895 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:23:21 +0000 Subject: [PATCH 009/692] DocBook/drm: Move `should be set' to the beginning of the sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a0f0f984f04f..42368f4f7bab 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -214,8 +214,8 @@ DRIVER_DMA_QUEUE - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. From 58f1d652def02db0bdcdf03d01f3483fc18ec392 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:31:42 +0000 Subject: [PATCH 010/692] DocBook/drm: Clean up `pre-memory management aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 42368f4f7bab..e9242c09ac54 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -273,7 +273,7 @@ conflict with DRM client requirements. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to be omitted. These requirements are driver specific, and care needs to be taken to keep both old and new applications and From 75aa9df5a2bf2ae90a1f0f6f283278f634ca4233 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:34:49 +0000 Subject: [PATCH 011/692] DocBook/drm: Rearrange wording to make more sense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index e9242c09ac54..eb28cc02d41b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -281,9 +281,9 @@ module parameter to control whether advanced features are enabled at load time or in legacy fashion. If compatibility is a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + from the old ones), care must be taken to prevent device + initialization and control that is incompatible with + currently active userspace drivers. From 6e375f44b6073dd320895753ff05cbfd3f410f66 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:37:05 +0000 Subject: [PATCH 012/692] DocBook/drm: Replace the paragraph's first sentence with its last sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index eb28cc02d41b..9eda9b6df51d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -269,8 +269,10 @@ initial output configuration. - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are @@ -279,11 +281,7 @@ needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent device - initialization and control that is incompatible with - currently active userspace drivers. + enabled at load time or in legacy fashion. From 06fa7b8066d4dc3f6c9d4c4bf34f385d5a823f13 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:40:55 +0000 Subject: [PATCH 013/692] DocBook/drm: Better wording Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9eda9b6df51d..b4196c1a239d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -292,8 +292,8 @@ information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. The DRM supports several counters which may be used for rough From 57a15fd663d6680dc100a537f0ed328993c33af2 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:42:36 +0000 Subject: [PATCH 014/692] DocBook/drm: Clearer wording with `for consumption by' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4196c1a239d..33290e3e3ffa 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -305,8 +305,8 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. From 8814630f0b59421e558f4403b79f5dc3a025a386 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:46:10 +0000 Subject: [PATCH 015/692] DocBook/drm: Insert missing `that' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 33290e3e3ffa..25e0f460a973 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -321,10 +321,10 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() may be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. From f07faf693c59b449b6637ea056e5826c85dcd265 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:48:15 +0000 Subject: [PATCH 016/692] DocBook/drm: Insert missing `an' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 25e0f460a973..1b2e3c37e377 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -342,7 +342,7 @@ DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for - example). + an example). If your device supports interrupt generation, you may want to From 5b658bf2bf9e47f9a67cd26b1c69e4441eaf04fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:49:11 +0000 Subject: [PATCH 017/692] DocBook/drm: `setup' is the noun; `to set up' is the verb Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1b2e3c37e377..d2f1ddaa3ca0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler at driver load time as well. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before From bb49a6a1f3303f9cf23a19f403c9b90cdff0e7da Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:50:14 +0000 Subject: [PATCH 018/692] DocBook/drm: `at driver load time' -> `when the driver is loaded' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2f1ddaa3ca0..7001937f6b7d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - set up an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before From 9c2416adac986d7d90814d7985a0ea80ebea416f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:56:12 +0000 Subject: [PATCH 019/692] DocBook/drm: Use the passive voice Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7001937f6b7d..03321ebaf4a7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -369,9 +369,9 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. From 118bdd70bdd73b08dcc3920fa30a21be5bbbffae Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:04 +0000 Subject: [PATCH 020/692] DocBook/drm: Offset modifiers with commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 03321ebaf4a7..ce145babef6e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -371,7 +371,7 @@ shadowed into memory (typically at address 0xc0000) or exists on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices the ROM address decoder is + it should be unmapped; on many devices, the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. @@ -440,7 +440,7 @@ and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous + ttm_bo_global_release, respectively. Also, like the previous object, ttm_global_item_ref is used to create an initial reference count for the TTM, which will call your initialization function. @@ -613,7 +613,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the + drivers before and after mode setting, since on many devices, the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go @@ -696,7 +696,7 @@ void intel_crt_init(struct drm_device *dev) set domain function, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function + i.e. an active render target; in that case, the set domain function blocks the client and waits for rendering to complete before performing any necessary flushing operations). From 8d36ffae67d89a86e37e7745503743fec1ac695c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:37 +0000 Subject: [PATCH 021/692] DocBook/drm: can -> could Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ce145babef6e..60ddf4be11c7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -372,7 +372,7 @@ on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. From eb2b8d4273fb8b73821ca8dbc9c0de10e9879833 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:58:42 +0000 Subject: [PATCH 022/692] DocBook/drm: , -> : Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 60ddf4be11c7..953c4cb726bb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -389,7 +389,7 @@ If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. TTM initialization @@ -647,7 +647,7 @@ void intel_crt_init(struct drm_device *dev) The memory manager lies at the heart of many DRM operations; it is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + pbuffers. The DRM currently contains two memory managers: TTM and GEM. From 005d7f4a01d3c755c3abab38b7e380f0bbff475d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:02:52 +0000 Subject: [PATCH 023/692] DocBook/drm: Insert missing comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 953c4cb726bb..230c738c22f0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -429,7 +429,7 @@ object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and release routines, which probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + ttm_mem_global_init and ttm_mem_global_release, respectively. Once your global TTM accounting structure is set up and initialized @@ -499,8 +499,8 @@ Output discovery and initialization - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. @@ -578,7 +578,7 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC and connector, several functions must + For each encoder, CRTC, and connector, several functions must be provided, depending on the object type. Encoder objects need to provide a DPMS (basically on/off) function, mode fixup (for converting requested modes into native hardware timings), @@ -727,7 +727,7 @@ void intel_crt_init(struct drm_device *dev) Output management At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. A CRTC is an abstraction representing a part of the chip that From 1c86de2216f678bfb6e2472af6e5c25b0df8d91f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:14:26 +0000 Subject: [PATCH 024/692] DocBook/drm: Remove parentheses and unnecessary repetition Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 230c738c22f0..6b2a80369f6b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,8 +433,8 @@ Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you need to create a buffer object TTM to + by calling ttm_global_item_ref on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, From ae63d793a43888eeb1c16422252d987aa37ab96c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:19:18 +0000 Subject: [PATCH 025/692] DocBook/drm: Insert `()' after function name Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6b2a80369f6b..6977cd91779c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,15 +433,15 @@ Once your global TTM accounting structure is set up and initialized - by calling ttm_global_item_ref on it, + by calling ttm_global_item_ref() on it, you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also, like the previous - object, ttm_global_item_ref is used to create an initial reference + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. From 049cc903e714a27805eae0c34a4c34902a385032 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:21:17 +0000 Subject: [PATCH 026/692] DocBook/drm: Streamline wording of GEM initialization Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6977cd91779c..7c11d790f749 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -451,7 +451,7 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following From 482b2ad8e488e609bb3bb408a8e9ca17b73b17c6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:37:24 +0000 Subject: [PATCH 027/692] DocBook/drm: basic -> core Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7c11d790f749..d385e902f5ff 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + core GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must From 54f2cb8fc930e08fd6156519b28c45d576615f82 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:41:37 +0000 Subject: [PATCH 028/692] DocBook/drm: Use a singular subject for grammatical cleanliness Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d385e902f5ff..3470c6b2f843 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. Most UMA devices have a so-called + core GEM initialization. A UMA device usually has a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must @@ -635,10 +635,10 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register may simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). From 9029bd7a42e3c32783866630ee3eb6b82e273544 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:42:20 +0000 Subject: [PATCH 029/692] DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes From Webster's Revised Unabridged Dictionary (1913) [web1913]: So-called \So"-called`\, a. So named; called by such a name (but perhaps called thus with doubtful propriety). From WordNet (r) 2.0 [wn]: so-called adj : doubtful or suspect; "these so-called experts are no help" [syn: {alleged(a)}, {supposed}] My strong conviction is that widespread use of 'so gennant' or 'sogennant' in German has led to the creeping misuse of 'so-called' in English (especially through technical writings). In English, it would be better to use: what is called or a better translation of 'so gennant': so named Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 3470c6b2f843..66a114a05c6f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has a so-called + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must From 1dbd39c3ea3967c41a09e81c826499f7ae9c8180 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:48:32 +0000 Subject: [PATCH 030/692] DocBook/drm: Insert `it' for smooth reading Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 66a114a05c6f..15541b1fc052 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -458,7 +458,7 @@ core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. From 3bf7df615612671271512aada7d83285f3fa731b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:49:10 +0000 Subject: [PATCH 031/692] DocBook/drm: Remove redundancy Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 15541b1fc052..c24f50ce7862 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -462,8 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific, and depends on - the architecture of the device. In the case of Intel + Initialization is driver specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device From 327d6fb962f227a31d4b03869774287efca49c50 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:18:14 +0000 Subject: [PATCH 032/692] DocBook/drm: Clarify `final initialization' via better formatting Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c24f50ce7862..1bbeea72a01f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -490,10 +490,19 @@ Output configuration - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + + + Finding and initializing the CRTCs, encoders, and connectors + for the device. + + + Creating an initial configuration. + + + Registering a framebuffer console driver. + + Output discovery and initialization From 8a9ba910ac3962e5adb4ce1f086adf1e21fa04d1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:21:22 +0000 Subject: [PATCH 033/692] DocBook/drm: Use a colon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1bbeea72a01f..790e634e5635 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -508,7 +508,7 @@ Output discovery and initialization Several core functions exist to create CRTCs, encoders, and - connectors, namely drm_crtc_init(), drm_connector_init(), and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. From 896ee65fb646f9a98243a9f69e5904dff394c78a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:26:17 +0000 Subject: [PATCH 034/692] DocBook/drm: Remove extraneous commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 790e634e5635..d2aee84f18af 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -562,9 +562,9 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + specific i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. From 4dc0152d5780f04573046b06a3fb7c7ad9b81afa Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:29:32 +0000 Subject: [PATCH 035/692] DocBook/drm: Insert `the' for readability, and change `set' to `setting' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2aee84f18af..09e02f7c668c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -573,8 +573,8 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing From 65ffef508f23d5e67940cadc8eca2ae34738018a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:55:58 +0000 Subject: [PATCH 036/692] DocBook/drm: Use an itemizedlist for what an encoder needs to provide Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 09e02f7c668c..da011f2af9cb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -586,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC, and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + + + A DPMS (basically on/off) function. + + + A mode-fixup function (for converting requested modes into + native hardware timings). + + + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + + + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. From 51b9500de28a1e5e7a2090de5d345d6d98581617 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:11:30 +0000 Subject: [PATCH 037/692] DocBook/drm: Use a for vblank ioctls Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 39 ++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 14 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index da011f2af9cb..457d56a1a966 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -619,22 +619,33 @@ void intel_crt_init(struct drm_device *dev) VBlank event handling The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + - - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - - - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices, the - vertical blank counter is reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and From f877bd4ad5508e2f0653c31d05ffe0ad4e2bfe11 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:16:15 +0000 Subject: [PATCH 038/692] DocBook/drm: Insert a comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 457d56a1a966..0387970234b3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -638,7 +638,7 @@ void intel_crt_init(struct drm_device *dev) after mode setting, since on many devices the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command so that the counter won't go backwards + _DRM_PRE_MODESET command, so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). From 0c2d91a80a156208d2f9f3dfb01871ebcf4a9338 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 15:59:56 +0000 Subject: [PATCH 039/692] DocBook/drm: Use an for fundamental GEM operations Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0387970234b3..c358367f9f85 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -709,9 +709,13 @@ void intel_crt_init(struct drm_device *dev) read & write, mapping, and domain ownership transfers. - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are From 2d43f5d667273ba4975cb79782a46aa374dd8607 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 16:00:55 +0000 Subject: [PATCH 040/692] DocBook/drm: Improve flow of GPU/CPU coherence sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c358367f9f85..ba20f9fbb62b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -720,8 +720,9 @@ void intel_crt_init(struct drm_device *dev) provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. This core CPU<->GPU coherency management is provided by the GEM set domain function, which evaluates an object's current domain and From b8c6e0fe46fcd60f58089365dd96dcf04f95263b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:34:00 +0000 Subject: [PATCH 041/692] DocBook/drm: Refer to the domain-setting function as a device-specific ioctl Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ba20f9fbb62b..9ae328aa1dd3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -724,11 +724,11 @@ void intel_crt_init(struct drm_device *dev) has finished rendering to the object, then the object must be made coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, the set domain function + i.e. an active render target; in that case, setting the domain blocks the client and waits for rendering to complete before performing any necessary flushing operations). From e355b2014da06458385902c47edf193a997895fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:38:48 +0000 Subject: [PATCH 042/692] DocBook/drm: Better flow with `, and then' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9ae328aa1dd3..0b6c59d6aa5f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -735,8 +735,8 @@ void intel_crt_init(struct drm_device *dev) Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM takes care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding From 964d32dcbefcfda015bc33dc76414b05c6f512de Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:41:31 +0000 Subject: [PATCH 043/692] DocBook/drm: Use `; otherwise,' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0b6c59d6aa5f..606a989d8895 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -743,7 +743,7 @@ void intel_crt_init(struct drm_device *dev) others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence From 5a462d58c84a2f5ed161daced2c7df34357c6d3d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:58:46 +0000 Subject: [PATCH 044/692] DocBook/drm: Clean up the paragraph on framebuffer objects Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 606a989d8895..a39e76bae03d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -795,14 +795,12 @@ void intel_crt_init(struct drm_device *dev) Framebuffer management - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - provides a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. From a5294e01f2777649834d218583e7a32b2dacb699 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:05:52 +0000 Subject: [PATCH 045/692] DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a39e76bae03d..65e14f96f943 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -277,7 +277,7 @@ to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are @@ -288,7 +288,7 @@ Driver private & performance counters The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv @@ -313,7 +313,7 @@ Configuring the device - Obviously, device configuration is device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -340,8 +340,8 @@ Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for an example). @@ -399,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. @@ -427,7 +427,7 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and + release hooks should point at your driver-specific init and release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release, respectively. @@ -438,7 +438,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions may be provided, + driver-specific init and release functions may be provided, likely eventually calling ttm_bo_global_init() and ttm_bo_global_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference @@ -462,7 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device @@ -561,8 +561,8 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, the new connector is registered with sysfs to make its properties available to applications. @@ -704,8 +704,8 @@ void intel_crt_init(struct drm_device *dev) GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. @@ -797,7 +797,7 @@ void intel_crt_init(struct drm_device *dev) Clients need to provide a framebuffer object which provides a source of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver specific memory + connector(s). A framebuffer is fundamentally a driver-specific memory object, made into an opaque handle by the DRM's addfb() function. Once a framebuffer has been created this way, it may be passed to the KMS mode setting routines for use in a completed configuration. @@ -807,7 +807,7 @@ void intel_crt_init(struct drm_device *dev) Command submission & fencing - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. @@ -840,7 +840,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific + wrapper functions. In addition, drivers export device-specific interfaces for use by userspace drivers & device aware applications through ioctls and sysfs files. From 7f0925aca586b4a0cce81b06af7383d6aec59cc1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:07:13 +0000 Subject: [PATCH 046/692] DocBook/drm: `device aware' -> `device-aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 65e14f96f943..9da9b2831370 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -841,7 +841,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm wrapper functions. In addition, drivers export device-specific - interfaces for use by userspace drivers & device aware + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. From bcd3cfc1213894ff955771508d46fa18d66e9328 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 19:29:16 +0000 Subject: [PATCH 047/692] DocBook/drm: Clean up a todo-note Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9da9b2831370..196b8b9dba11 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -850,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages should cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. From 2cafbb37a135945ecc07d17f3484ed0dea1aa8b1 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 2 May 2011 16:30:52 -0600 Subject: [PATCH 048/692] powerpc/5200: add support for charon board Signed-off-by: Heiko Schocher Acked-by: Benjamin Herrenschmidt Acked-by: Wolfram Sang [squashed with patch to add sm501 node] Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/charon.dts | 236 +++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 237 insertions(+) create mode 100644 arch/powerpc/boot/dts/charon.dts diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000000..0e00e508eaa6 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,236 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index e36d6e232ae6..846b789fb195 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101", From 6ecc07b966977bb0855db1fa52d233c39fb3cafb Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 22 Mar 2011 09:27:32 +0100 Subject: [PATCH 049/692] powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. added: CONFIG_MTD_OF_PARTS CONFIG_MTD_PLATRAM CONFIG_FIXED_PHY CONFIG_SENSORS_LM80 CONFIG_MFD_SM501 CONFIG_FB CONFIG_FB_FOREIGN_ENDIAN CONFIG_FB_SM501 CONFIG_FRAMEBUFFER_CONSOLE CONFIG_RTC_DRV_DS1374 Signed-off-by: Heiko Schocher Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/configs/52xx/tqm5200_defconfig | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 959cd2cfc275..716a37be16e3 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,9 +1,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y +CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set # CONFIG_EPOLL is not set @@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_BESTCOMM=y -CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -38,17 +38,18 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_MISC_DEVICES is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_ATA=y @@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_LXT_PHY=y +CONFIG_FIXED_PHY=y CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 @@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SENSORS_LM80=y CONFIG_WATCHDOG=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y @@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set From dc9c0beecfeb4866fdbc245c295cf30d340b702c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 11 Oct 2011 15:19:43 -0400 Subject: [PATCH 050/692] piix: ICH7 MWDMA1 errata Based on libata commit c611bed7. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/piix.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index b59d04c72051..1892e81fb00f 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -331,7 +331,7 @@ static const struct ide_port_ops ich_port_ops = { .udma_mask = udma, \ } -#define DECLARE_ICH_DEV(udma) \ +#define DECLARE_ICH_DEV(mwdma, udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ @@ -340,7 +340,7 @@ static const struct ide_port_ops ich_port_ops = { .port_ops = &ich_port_ops, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ + .mwdma_mask = mwdma, \ .udma_mask = udma, \ } @@ -362,13 +362,15 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { /* 2: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA2), /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2), /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4), /* 5: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), + /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5), + /* 7: ICH7/7-R, no MWDMA1 */ + DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5), }; /** @@ -438,9 +440,9 @@ static const struct pci_device_id piix_pci_tbl[] = { #endif { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, { 0, }, }; From 839e7306e5d1ebd57cf12e83d9910b8b2dbe79ba Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 12 Oct 2011 04:31:51 +0000 Subject: [PATCH 051/692] IDE: Don't powerdown Compaq Triflex IDE device on suspend Don't powerdown Compaq Triflex IDE device on suspend This fixes APM suspend on Compaq Armada 7400. APM BIOS doesn't suspend if IDE is powered down when suspending. The Triflex controller is found only on old Compaq boards, so this patch will hopefully have no side effects. This patch fixes a suspend regression introduced in feb22b7f8e62b1b987a3a1dbad95af767a1df832 ("ide: add proper PCI PM support (v2)"). Signed-off-by: Mikulas Patocka [bart: add commit's summary in parens] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/triflex.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index e53a1b78378b..281c91426345 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -113,12 +113,26 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); +#ifdef CONFIG_PM +static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(dev); + return 0; +} +#else +#define triflex_ide_pci_suspend NULL +#endif + static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, - .suspend = ide_pci_suspend, + .suspend = triflex_ide_pci_suspend, .resume = ide_pci_resume, }; From acc8dbe7f44f1bab6fcf21f2d5efb32ea92e19fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Oct 2011 04:45:34 +0000 Subject: [PATCH 052/692] icside: DMA support fix Fix problem introduced by commit 5e37bdc ("ide: add struct ide_dma_ops (take 3)"): d.dma_ops shouldn't be cleared if we are going to use DMA. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/icside.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4a697a238e28..8716066a2f2b 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -521,8 +521,8 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; + } else d.dma_ops = NULL; - } ret = ide_host_register(host, &d, hws); if (ret) From 0ab3d8b3213c8bb55370b11fcc5321ee4f2c5e92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 13 Oct 2011 00:28:54 +0000 Subject: [PATCH 053/692] cy82c693: fix PCI device selection Wrong PCI device may be selected by cy82c693_set_pio_mode() if modular IDE host drivers are used and there are additional IDE PCI devices installed in the system. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/cy82c693.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 67cbcfa35122..847553fd8b96 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick , Integrator - * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * @@ -90,7 +90,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -141,7 +141,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } - if (hwif->index > 0) + if (drive->dn > 1) pci_dev_put(dev); } From cd8e368f475251c0e3c42203f21e68fa25afbb3d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 18 Aug 2011 16:35:44 -0400 Subject: [PATCH 054/692] ktest: Add TEST_TYPE install option In testing one of my boxes, I found that I only wanted to build and install the kernel. I wanted to manually reboot the box and test it. Adding a TEST_TYPE option "install" allows this to happen. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 7 +++++++ tools/testing/ktest/sample.conf | 7 ++++--- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8d02ccb10c59..e087cb411c9b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2929,6 +2929,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { build $build_type or next; } + if ($test_type eq "install") { + get_version; + install; + success $i; + next; + } + if ($test_type ne "build") { my $failed = 0; start_monitor_and_boot or $failed = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b8bcd14b5a4d..eadca3eb6f5a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -253,9 +253,10 @@ # The default test type (default test) # The test types may be: -# build - only build the kernel, do nothing else -# boot - build and boot the kernel -# test - build, boot and if TEST is set, run the test script +# build - only build the kernel, do nothing else +# install - build and install, but do nothing else (does not reboot) +# boot - build, install, and boot the kernel +# test - build, boot and if TEST is set, run the test script # (If TEST is not set, it defaults back to boot) # bisect - Perform a bisect on the kernel (see BISECT_TYPE below) # patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) From a908a6659ba3e7eb52ea74a78e2f342978aa5f5b Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:03 +0200 Subject: [PATCH 055/692] ktest: Create outputdir if it does not exist Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-2-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index e087cb411c9b..253e9a2cfbd5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2850,9 +2850,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { chdir $builddir || die "can't change directory to $builddir"; - if (!-d $tmpdir) { - mkpath($tmpdir) or - die "can't create $tmpdir"; + foreach my $dir ($tmpdir, $outputdir) { + if (!-d $dir) { + mkpath($dir) or + die "can't create $dir"; + } } $ENV{"SSH_USER"} = $ssh_user; From 134882311cb9c2dca2ffadeabc5f8f9faa0fca81 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:04 +0200 Subject: [PATCH 056/692] ktest: Only need to save .config when doing mrproper Only save the .config file if we're doing mrproper Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 253e9a2cfbd5..20b0e736b98b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1272,16 +1272,16 @@ sub build { # allow for empty configs run_command "touch $output_config"; - run_command "mv $output_config $outputdir/config_temp" or - dodie "moving .config"; + if (!$noclean) { + run_command "mv $output_config $outputdir/config_temp" or + dodie "moving .config"; - if (!$noclean && !run_command "$make mrproper") { - dodie "make mrproper"; + run_command "$make mrproper" or dodie "make mrproper"; + + run_command "mv $outputdir/config_temp $output_config" or + dodie "moving config_temp"; } - run_command "mv $outputdir/config_temp $output_config" or - dodie "moving config_temp"; - } elsif (!$noclean) { unlink "$output_config"; run_command "$make mrproper" or From 2728be418db65aa873ee354168b56f028845e956 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:05 +0200 Subject: [PATCH 057/692] ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 20b0e736b98b..debc6898e60b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -603,8 +603,13 @@ sub doprint { } sub run_command; +sub start_monitor; +sub end_monitor; +sub wait_for_monitor; sub reboot { + my ($time) = @_; + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -615,6 +620,12 @@ sub reboot { # nope? power cycle it. run_command "$power_cycle"; } + + if (defined($time)) { + start_monitor; + wait_for_monitor $time; + end_monitor; + } } sub do_not_reboot { @@ -719,10 +730,7 @@ sub fail { # no need to reboot for just building. if (!do_not_reboot) { doprint "REBOOTING\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } my $name = ""; @@ -1356,10 +1364,7 @@ sub success { if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } } @@ -1500,10 +1505,7 @@ sub run_git_bisect { sub bisect_reboot { doprint "Reboot and sleep $bisect_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $bisect_sleep_time; - end_monitor; + reboot $bisect_sleep_time; } # returns 1 on success, 0 on failure, -1 on skip @@ -2066,10 +2068,7 @@ sub config_bisect { sub patchcheck_reboot { doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $patchcheck_sleep_time; - end_monitor; + reboot $patchcheck_sleep_time; } sub patchcheck { @@ -2659,10 +2658,7 @@ sub make_min_config { } doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } success $i; From eaa1fe25ea79e94c6727a67baaca3da0791da5de Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 Sep 2011 17:20:39 -0400 Subject: [PATCH 058/692] ktest: Fail when grub menu not found Currently if the grub menu that is supplied is not found, it will just boot into the last grub menu in menu.lst. Fail instead of confusing the user why their kernel is not booting. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index debc6898e60b..ca6ff99ab1a5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -862,9 +862,12 @@ sub get_grub_index { open(IN, "$ssh_grub |") or die "unable to get menu.lst"; + my $found = 0; + while () { if (/^\s*title\s+$grub_menu\s*$/) { $grub_number++; + $found = 1; last; } elsif (/^\s*title\s/) { $grub_number++; @@ -873,7 +876,7 @@ sub get_grub_index { close(IN); die "Could not find '$grub_menu' in /boot/grub/menu on $machine" - if ($grub_number < 0); + if (!$found); doprint "$grub_number\n"; } From e0a8742e3d4b7649be2ca6f22e7d45153505fc81 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 17:50:48 -0400 Subject: [PATCH 059/692] ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 10 +++++++++- tools/testing/ktest/sample.conf | 7 +++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index ca6ff99ab1a5..74fb2acae18d 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -42,6 +42,7 @@ $default{"BISECT_MANUAL"} = 0; $default{"BISECT_SKIP"} = 1; $default{"SUCCESS_LINE"} = "login:"; $default{"DETECT_TRIPLE_FAULT"} = 1; +$default{"NO_INSTALL"} = 0; $default{"BOOTED_TIMEOUT"} = 1; $default{"DIE_ON_FAILURE"} = 1; $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; @@ -84,6 +85,7 @@ my $grub_number; my $target; my $make; my $post_install; +my $no_install; my $noclean; my $minconfig; my $start_minconfig; @@ -1094,6 +1096,8 @@ sub do_post_install { sub install { + return if ($no_install); + run_scp "$outputdir/$build_target", "$target_image" or dodie "failed to copy image"; @@ -2810,6 +2814,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $reboot_type = set_test_option("REBOOT_TYPE", $i); $grub_menu = set_test_option("GRUB_MENU", $i); $post_install = set_test_option("POST_INSTALL", $i); + $no_install = set_test_option("NO_INSTALL", $i); $reboot_script = set_test_option("REBOOT_SCRIPT", $i); $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i); $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i); @@ -2890,8 +2895,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = "ERROR"; } + my $installme = ""; + $installme = " no_install" if ($no_install); + doprint "\n\n"; - doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n"; + doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; unlink $dmesg; unlink $buildlog; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index eadca3eb6f5a..b3e0dc11fc8a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -294,6 +294,13 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If for some reason you just want to boot the kernel and you do not +# want the test to install anything new. For example, you may just want +# to boot test the same kernel over and over and do not want to go through +# the hassle of installing anything, you can set this option to 1 +# (default 0) +#NO_INSTALL = 1 + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # From 2b803365a6fa177ea7e1f64f645be1cb5dd39d55 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 18:00:23 -0400 Subject: [PATCH 060/692] ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 33 +++++++++++++++++++++++++++------ tools/testing/ktest/sample.conf | 10 ++++++++++ 2 files changed, 37 insertions(+), 6 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 74fb2acae18d..51ddaa5ed556 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -117,6 +117,7 @@ my $timeout; my $booted_timeout; my $detect_triplefault; my $console; +my $reboot_success_line; my $success_line; my $stop_after_success; my $stop_after_failure; @@ -612,6 +613,13 @@ sub wait_for_monitor; sub reboot { my ($time) = @_; + if (defined($time)) { + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + } + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -624,8 +632,7 @@ sub reboot { } if (defined($time)) { - start_monitor; - wait_for_monitor $time; + wait_for_monitor($time, $reboot_success_line); end_monitor; } } @@ -706,16 +713,29 @@ sub end_monitor { } sub wait_for_monitor { - my ($time) = @_; + my ($time, $stop) = @_; + my $full_line = ""; my $line; + my $booted = 0; doprint "** Wait for monitor to settle down **\n"; # read the monitor and wait for the system to calm down - do { + while (!$booted) { $line = wait_for_input($monitor_fp, $time); - print "$line" if (defined($line)); - } while (defined($line)); + last if (!defined($line)); + print "$line"; + $full_line .= $line; + + if (defined($stop) && $full_line =~ /$stop/) { + doprint "wait for monitor detected $stop\n"; + $booted = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + } print "** Monitor flushed **\n"; } @@ -2836,6 +2856,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $console = set_test_option("CONSOLE", $i); $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); $success_line = set_test_option("SUCCESS_LINE", $i); + $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i); $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); $stop_test_after = set_test_option("STOP_TEST_AFTER", $i); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b3e0dc11fc8a..67bc4e06922c 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -423,6 +423,14 @@ # (default "login:") #SUCCESS_LINE = login: +# To speed up between reboots, defining a line that the +# default kernel produces that represents that the default +# kernel has successfully booted and can be used to pass +# a new test kernel to it. Otherwise ktest.pl will wait till +# SLEEP_TIME to continue. +# (default undefined) +#REBOOT_SUCCESS_LINE = login: + # In case the console constantly fills the screen, having # a specified time to stop the test after success is recommended. # (in seconds) @@ -488,6 +496,8 @@ # another test. If a reboot to the reliable kernel happens, # we wait SLEEP_TIME for the console to stop producing output # before starting the next test. +# +# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE. # (default 60) #SLEEP_TIME = 60 From 4ab1cce5bdd87948b75ed4fe4a8629c0f76267ae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 18:12:20 -0400 Subject: [PATCH 061/692] ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 51ddaa5ed556..057676a8e785 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -133,6 +133,9 @@ my %config_help; my %variable; my %force_config; +# do not force reboots on config problems +my $no_reboot = 1; + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF @@ -640,7 +643,7 @@ sub reboot { sub do_not_reboot { my $i = $iteration; - return $test_type eq "build" || + return $test_type eq "build" || $no_reboot || ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build"); } @@ -1285,6 +1288,10 @@ sub build { unlink $buildlog; + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + if (defined($pre_build)) { my $ret = run_command $pre_build; if (!$ret && defined($pre_build_die) && @@ -1353,10 +1360,15 @@ sub build { if (!$build_ret) { # bisect may need this to pass - return 0 if ($in_bisect); + if ($in_bisect) { + $no_reboot = $save_no_reboot; + return 0; + } fail "failed build" and return 0; } + $no_reboot = $save_no_reboot; + return 1; } @@ -2806,6 +2818,9 @@ sub set_test_option { # First we need to do is the builds for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { + # Do not reboot on failing test options + $no_reboot = 1; + $iteration = $i; my $makecmd = set_test_option("MAKE_CMD", $i); @@ -2941,6 +2956,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + + if ($test_type eq "bisect") { bisect $i; next; From 45d73a5d8a98dbabcdf37e2da5ef5b0412244643 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 19:44:53 -0400 Subject: [PATCH 062/692] ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 64 ++++++++++++++++++++++++++++++--- tools/testing/ktest/sample.conf | 38 ++++++++++++++++++++ 2 files changed, 98 insertions(+), 4 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 057676a8e785..c76e18f00c44 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -361,6 +361,21 @@ sub set_variable { } } +sub process_if { + my ($name, $value) = @_; + + my $val = process_variables($value); + + if ($val =~ /^\s*0\s*$/) { + return 0; + } elsif ($val =~ /^\s*\d+\s*$/) { + return 1; + } + + die ("$name: $.: Undefined variable $val in if statement\n"); + return 1; +} + sub read_config { my ($config) = @_; @@ -376,6 +391,8 @@ sub read_config { my $skip = 0; my $rest; my $test_case = 0; + my $if = 0; + my $if_set = 0; while () { @@ -397,7 +414,7 @@ sub read_config { $default = 0; $repeat = 1; - if ($rest =~ /\s+SKIP(.*)/) { + if ($rest =~ /\s+SKIP\b(.*)/) { $rest = $1; $skip = 1; } else { @@ -411,9 +428,16 @@ sub read_config { $repeat_tests{"$test_num"} = $repeat; } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + $rest = $2; + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $if = 1; + } else { + $if = 0; } if ($rest !~ /^\s*$/) { @@ -437,10 +461,42 @@ sub read_config { $skip = 0; } + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + $if = 1; + $rest = $2; + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + } else { + $if = 0; + } + if ($rest !~ /^\s*$/) { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*ELSE(.*)$/) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $rest = $1; + if ($if_set) { + $skip = 1; + } else { + $skip = 0; + + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + # May be a ELSE IF section. + if (!process_if($name, $1)) { + $skip = 1; + } + } else { + $if = 0; + } + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 67bc4e06922c..6a0a0ba59975 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,44 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# Both TEST_START and DEFAULTS sections can also have the IF keyword +# The value after the IF must evaluate into a 0 or non 0 positive +# integer, and can use the config variables (explained below). +# +# DEFAULTS IF ${IS_X86_32} +# +# The above will process the DEFAULTS section if the config +# variable IS_X86_32 evaluates to a non zero positive integer +# otherwise if it evaluates to zero, it will act the same +# as if the SKIP keyword was used. +# +# The ELSE keyword can be used directly after a section with +# a IF statement. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE +# +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal +# +# +# The ELSE keyword can also contain an IF statement to allow multiple +# if then else sections. But all the sections must be either +# DEFAULT or TEST_START, they can not be a mixture. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE IF ${RUN_DISK_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests +# +# ELSE IF ${RUN_CPU_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu +# +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# #### Config variables #### # From ab7a3f52cef5ff1c784de7adfbda3421b10754a4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 20:24:07 -0400 Subject: [PATCH 063/692] ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 54 +++++++++++++++++++++++++++++---- tools/testing/ktest/sample.conf | 14 +++++++++ 2 files changed, 62 insertions(+), 6 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index c76e18f00c44..ed20d6881ec9 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -361,11 +361,47 @@ sub set_variable { } } +sub process_compare { + my ($lval, $cmp, $rval) = @_; + + # remove whitespace + + $lval =~ s/^\s*//; + $lval =~ s/\s*$//; + + $rval =~ s/^\s*//; + $rval =~ s/\s*$//; + + if ($cmp eq "==") { + return $lval eq $rval; + } elsif ($cmp eq "!=") { + return $lval ne $rval; + } + + my $statement = "$lval $cmp $rval"; + my $ret = eval $statement; + + # $@ stores error of eval + if ($@) { + return -1; + } + + return $ret; +} + sub process_if { my ($name, $value) = @_; my $val = process_variables($value); + if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + my $ret = process_compare($1, $2, $3); + if ($ret < 0) { + die "$name: $.: Unable to process comparison\n"; + } + return $ret; + } + if ($val =~ /^\s*0\s*$/) { return 0; } elsif ($val =~ /^\s*\d+\s*$/) { @@ -428,8 +464,8 @@ sub read_config { $repeat_tests{"$test_num"} = $repeat; } - if ($rest =~ /\sIF\s+(\S*)(.*)/) { - $rest = $2; + if ($rest =~ /\sIF\s+(.*)/) { + $rest = ""; if (process_if($name, $1)) { $if_set = 1; } else { @@ -461,14 +497,14 @@ sub read_config { $skip = 0; } - if ($rest =~ /\sIF\s+(\S*)(.*)/) { + if ($rest =~ /\sIF\s+(.*)/) { $if = 1; - $rest = $2; if (process_if($name, $1)) { $if_set = 1; } else { $skip = 1; } + $rest = ""; } else { $if = 0; } @@ -477,26 +513,32 @@ sub read_config { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } - } elsif (/^\s*ELSE(.*)$/) { + } elsif (/^\s*ELSE\b(.*)$/) { if (!$if) { die "$name: $.: ELSE found with out matching IF section\n$_"; } $rest = $1; if ($if_set) { $skip = 1; + $rest = ""; } else { $skip = 0; - if ($rest =~ /\sIF\s+(\S*)(.*)/) { + if ($rest =~ /\sIF\s+(.*)/) { # May be a ELSE IF section. if (!process_if($name, $1)) { $skip = 1; } + $rest = ""; } else { $if = 0; } } + if ($rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after DEFAULTS\n$_"; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 6a0a0ba59975..4e8fb91fd517 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,8 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# +# # Both TEST_START and DEFAULTS sections can also have the IF keyword # The value after the IF must evaluate into a 0 or non 0 positive # integer, and can use the config variables (explained below). @@ -110,6 +112,18 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network # +# The if statement may also have comparisons that will and for +# == and !=, strings may be used for both sides. +# +# BOX_TYPE := x86_32 +# +# DEFAULTS IF ${BOX_TYPE} == x86_32 +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32 +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 +# + + #### Config variables #### # From 2ed3b16128e93309758e62937e7f137ac9844227 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 21:00:00 -0400 Subject: [PATCH 064/692] ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 55 ++++++++++++++++++++++++++++----- tools/testing/ktest/sample.conf | 32 +++++++++++++++++-- 2 files changed, 78 insertions(+), 9 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index ed20d6881ec9..62de47de2b04 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -412,15 +412,16 @@ sub process_if { return 1; } -sub read_config { - my ($config) = @_; +sub __read_config { + my ($config, $current_test_num) = @_; - open(IN, $config) || die "can't read file $config"; + my $in; + open($in, $config) || die "can't read file $config"; my $name = $config; $name =~ s,.*/(.*),$1,; - my $test_num = 0; + my $test_num = $$current_test_num; my $default = 1; my $repeat = 1; my $num_tests_set = 0; @@ -430,7 +431,7 @@ sub read_config { my $if = 0; my $if_set = 0; - while () { + while (<$in>) { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); @@ -539,6 +540,33 @@ sub read_config { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*INCLUDE\s+(\S+)/) { + + next if ($skip); + + if (!$default) { + die "$name: $.: INCLUDE can only be done in default sections\n$_"; + } + + my $file = process_variables($1); + + if ($file !~ m,^/,) { + # check the path of the config file first + if ($config =~ m,(.*)/,) { + if (-f "$1/$file") { + $file = "$1/$file"; + } + } + } + + if ( ! -r $file ) { + die "$name: $.: Can't read file $file\n$_"; + } + + if (__read_config($file, \$test_num)) { + $test_case = 1; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); @@ -594,13 +622,26 @@ sub read_config { } } - close(IN); - if ($test_num) { $test_num += $repeat - 1; $opt{"NUM_TESTS"} = $test_num; } + close($in); + + $$current_test_num = $test_num; + + return $test_case; +} + +sub read_config { + my ($config) = @_; + + my $test_case; + my $test_num = 0; + + $test_case = __read_config $config, \$test_num; + # make sure we have all mandatory configs get_ktest_configs; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 4e8fb91fd517..ae2a93c732ac 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -122,8 +122,36 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 # - - +# +# INCLUDE file +# +# The INCLUDE keyword may be used in DEFAULT sections. This will +# read another config file and process that file as well. The included +# file can include other files, add new test cases or default +# statements. Config variables will be passed to these files and changes +# to config variables will be seen by top level config files. Including +# a file is processed just like the contents of the file was cut and pasted +# into the top level file, except, that include files that end with +# TEST_START sections will have that section ended at the end of +# the include file. That is, an included file is included followed +# by another DEFAULT keyword. +# +# Unlike other files referenced in this config, the file path does not need +# to be absolute. If the file does not start with '/', then the directory +# that the current config file was located in is used. If no config by the +# given name is found there, then the current directory is searched. +# +# INCLUDE myfile +# DEFAULT +# +# is the same as: +# +# INCLUDE myfile +# +# Note, if the include file does not contain a full path, the file is +# searched first by the location of the original include file, and then +# by the location that ktest.pl was executed in. +# #### Config variables #### # From 0050b6bbef01d871a34a77685047190aa428b210 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 21:10:30 -0400 Subject: [PATCH 065/692] ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 63 +++++++++++++----------------------- 1 file changed, 22 insertions(+), 41 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 62de47de2b04..b4f32e734745 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -436,21 +436,30 @@ sub __read_config { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); - if (/^\s*TEST_START(.*)/) { + if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) { - $rest = $1; + my $type = $1; + $rest = $2; - if ($num_tests_set) { - die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + my $old_test_num; + my $old_repeat; + + if ($type eq "TEST_START") { + + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } + + $old_test_num = $test_num; + $old_repeat = $repeat; + + $test_num += $repeat; + $default = 0; + $repeat = 1; + } else { + $default = 1; } - my $old_test_num = $test_num; - my $old_repeat = $repeat; - - $test_num += $repeat; - $default = 0; - $repeat = 1; - if ($rest =~ /\s+SKIP\b(.*)/) { $rest = $1; $skip = 1; @@ -478,42 +487,14 @@ sub __read_config { } if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after TEST_START\n$_"; + die "$name: $.: Gargbage found after $type\n$_"; } - if ($skip) { + if ($skip && $type eq "TEST_START") { $test_num = $old_test_num; $repeat = $old_repeat; } - } elsif (/^\s*DEFAULTS(.*)$/) { - $default = 1; - - $rest = $1; - - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; - } else { - $skip = 0; - } - - if ($rest =~ /\sIF\s+(.*)/) { - $if = 1; - if (process_if($name, $1)) { - $if_set = 1; - } else { - $skip = 1; - } - $rest = ""; - } else { - $if = 0; - } - - if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after DEFAULTS\n$_"; - } - } elsif (/^\s*ELSE\b(.*)$/) { if (!$if) { die "$name: $.: ELSE found with out matching IF section\n$_"; From 3d1cc41432b0491a39a3185b52bfa1d0411bba10 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 22:14:21 -0400 Subject: [PATCH 066/692] ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 37 ++++++++++++++++++++++++++------- tools/testing/ktest/sample.conf | 15 +++++++++++++ 2 files changed, 44 insertions(+), 8 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index b4f32e734745..7bce412bbdcc 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -337,10 +337,17 @@ sub process_variables { } sub set_value { - my ($lvalue, $rvalue) = @_; + my ($lvalue, $rvalue, $override, $overrides, $name) = @_; if (defined($opt{$lvalue})) { - die "Error: Option $lvalue defined more than once!\n"; + if (!$override || defined(${$overrides}{$lvalue})) { + my $extra = ""; + if ($override) { + $extra = "In the same override section!\n"; + } + die "$name: $.: Option $lvalue defined more than once!\n$extra"; + } + ${$overrides}{$lvalue} = $rvalue; } if ($rvalue =~ /^\s*$/) { delete $opt{$lvalue}; @@ -430,6 +437,9 @@ sub __read_config { my $test_case = 0; my $if = 0; my $if_set = 0; + my $override = 0; + + my %overrides; while (<$in>) { @@ -443,6 +453,7 @@ sub __read_config { my $old_test_num; my $old_repeat; + $override = 0; if ($type eq "TEST_START") { @@ -468,10 +479,20 @@ sub __read_config { $skip = 0; } - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { + $repeat = $1; + $rest = $2; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ /\sOVERRIDE\b(.*)/) { + # DEFAULT only + $rest = $1; + $override = 1; + # Clear previous overrides + %overrides = (); + } } if ($rest =~ /\sIF\s+(.*)/) { @@ -573,10 +594,10 @@ sub __read_config { } if ($default || $lvalue =~ /\[\d+\]$/) { - set_value($lvalue, $rvalue); + set_value($lvalue, $rvalue, $override, \%overrides, $name); } else { my $val = "$lvalue\[$test_num\]"; - set_value($val, $rvalue); + set_value($val, $rvalue, $override, \%overrides, $name); if ($repeat > 1) { $repeats{$val} = $repeat; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index ae2a93c732ac..0fd3ca30ad0c 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,21 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# DEFAULTS OVERRIDE +# +# Options defined in the DEFAULTS section can not be duplicated +# even if they are defined in two different DEFAULT sections. +# This is done to catch mistakes where an option is added but +# the previous option was forgotten about and not commented. +# +# The OVERRIDE keyword can be added to a section to allow this +# section to override other DEFAULT sections values that have +# been defined previously. It will only override options that +# have been defined before its use. Options defined later +# in a non override section will still error. The same option +# can not be defined in the same section even if that section +# is marked OVERRIDE. +# # # # Both TEST_START and DEFAULTS sections can also have the IF keyword From 9900b5dc067551fcdcaec63d013b1d95b36835ae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 22:41:14 -0400 Subject: [PATCH 067/692] ktest: Add DEFINED keyword for IF statements Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 17 ++++++++++++++++- tools/testing/ktest/sample.conf | 17 +++++++++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 7bce412bbdcc..76a5964595da 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -396,6 +396,13 @@ sub process_compare { return $ret; } +sub value_defined { + my ($val) = @_; + + return defined($variable{$2}) || + defined($opt{$2}); +} + sub process_if { my ($name, $value) = @_; @@ -409,13 +416,21 @@ sub process_if { return $ret; } + if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) { + if (defined $1) { + return !value_defined($2); + } else { + return value_defined($2); + } + } + if ($val =~ /^\s*0\s*$/) { return 0; } elsif ($val =~ /^\s*\d+\s*$/) { return 1; } - die ("$name: $.: Undefined variable $val in if statement\n"); + die ("$name: $.: Undefined content $val in if statement\n"); return 1; } diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 0fd3ca30ad0c..7b49f07b6423 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -137,6 +137,23 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 # +# The DEFINED keyword can be used by the IF statements too. +# It returns true if the given config variable or option has been defined +# or false otherwise. +# +# +# DEFAULTS IF DEFINED USE_CC +# CC := ${USE_CC} +# ELSE +# CC := gcc +# +# +# As well as NOT DEFINED. +# +# DEFAULTS IF NOT DEFINED MAKE_CMD +# MAKE_CMD := make ARCH=x86 +# +# # # INCLUDE file # From ac6974c76e66c2f9b8b8a23b974c5f3d94302e81 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 4 Oct 2011 09:40:17 -0400 Subject: [PATCH 068/692] ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 71 +++++++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 22 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 76a5964595da..2a9d04207174 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2372,12 +2372,31 @@ sub patchcheck { } my %depends; +my %depcount; my $iflevel = 0; my @ifdeps; # prevent recursion my %read_kconfigs; +sub add_dep { + # $config depends on $dep + my ($config, $dep) = @_; + + if (defined($depends{$config})) { + $depends{$config} .= " " . $dep; + } else { + $depends{$config} = $dep; + } + + # record the number of configs depending on $dep + if (defined $depcount{$dep}) { + $depcount{$dep}++; + } else { + $depcount{$dep} = 1; + } +} + # taken from streamline_config.pl sub read_kconfig { my ($kconfig) = @_; @@ -2424,30 +2443,19 @@ sub read_kconfig { $config = $2; for (my $i = 0; $i < $iflevel; $i++) { - if ($i) { - $depends{$config} .= " " . $ifdeps[$i]; - } else { - $depends{$config} = $ifdeps[$i]; - } - $state = "DEP"; + add_dep $config, $ifdeps[$i]; } # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { - if (defined($depends{$1})) { - $depends{$config} .= " " . $1; - } else { - $depends{$config} = $1; - } + add_dep $config, $1; # Get the configs that select this config - } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - if (defined($depends{$1})) { - $depends{$1} .= " " . $config; - } else { - $depends{$1} = $config; - } + } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) { + + # selected by depends on config + add_dep $1, $config; # Check for if statements } elsif (/^if\s+(.*\S)\s*$/) { @@ -2559,11 +2567,18 @@ sub make_new_config { close OUT; } +sub chomp_config { + my ($config) = @_; + + $config =~ s/CONFIG_//; + + return $config; +} + sub get_depends { my ($dep) = @_; - my $kconfig = $dep; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $dep; $dep = $depends{"$kconfig"}; @@ -2613,8 +2628,7 @@ sub test_this_config { return undef; } - my $kconfig = $config; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $config; # Test dependencies first if (defined($depends{"$kconfig"})) { @@ -2704,6 +2718,14 @@ sub make_min_config { my @config_keys = keys %min_configs; + # All configs need a depcount + foreach my $config (@config_keys) { + my $kconfig = chomp_config $config; + if (!defined $depcount{$kconfig}) { + $depcount{$kconfig} = 0; + } + } + # Remove anything that was set by the make allnoconfig # we shouldn't need them as they get set for us anyway. foreach my $config (@config_keys) { @@ -2742,8 +2764,13 @@ sub make_min_config { # Now disable each config one by one and do a make oldconfig # till we find a config that changes our list. - # Put configs that did not modify the config at the end. my @test_configs = keys %min_configs; + + # Sort keys by who is most dependent on + @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} } + @test_configs ; + + # Put configs that did not modify the config at the end. my $reset = 1; for (my $i = 0; $i < $#test_configs; $i++) { if (!defined($nochange_config{$test_configs[0]})) { From a9f84424be8d12e8a84b9eac112cd1152587d437 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 17 Oct 2011 11:06:29 -0400 Subject: [PATCH 069/692] ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 49 +++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 2a9d04207174..d292c2d8dfe9 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -449,6 +449,7 @@ sub __read_config { my $num_tests_set = 0; my $skip = 0; my $rest; + my $line; my $test_case = 0; my $if = 0; my $if_set = 0; @@ -465,6 +466,7 @@ sub __read_config { my $type = $1; $rest = $2; + $line = $2; my $old_test_num; my $old_repeat; @@ -486,32 +488,28 @@ sub __read_config { $default = 1; } - if ($rest =~ /\s+SKIP\b(.*)/) { - $rest = $1; + # If SKIP is anywhere in the line, the command will be skipped + if ($rest =~ s/\s+SKIP\b//) { $skip = 1; } else { $test_case = 1; $skip = 0; } - if (!$skip) { - if ($type eq "TEST_START") { - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; - } - } elsif ($rest =~ /\sOVERRIDE\b(.*)/) { - # DEFAULT only - $rest = $1; - $override = 1; - # Clear previous overrides - %overrides = (); + if ($rest =~ s/\sELSE\b//) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $if = 0; + + if ($if_set) { + $skip = 1; + } else { + $skip = 0; } } - if ($rest =~ /\sIF\s+(.*)/) { - $rest = ""; + if ($rest =~ s/\sIF\s+(.*)//) { if (process_if($name, $1)) { $if_set = 1; } else { @@ -520,9 +518,24 @@ sub __read_config { $if = 1; } else { $if = 0; + $if_set = 0; } - if ($rest !~ /^\s*$/) { + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ s/\s+ITERATE\s+(\d+)//) { + $repeat = $1; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ s/\sOVERRIDE\b//) { + # DEFAULT only + $override = 1; + # Clear previous overrides + %overrides = (); + } + } + + if (!$skip && $rest !~ /^\s*$/) { die "$name: $.: Gargbage found after $type\n$_"; } From 8d735212e441af855afd28ccc402fcaf12999f8d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 17 Oct 2011 11:36:44 -0400 Subject: [PATCH 070/692] ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 53 +++++++++++++++++++++++++++++---- tools/testing/ktest/sample.conf | 10 +++++++ 2 files changed, 58 insertions(+), 5 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index d292c2d8dfe9..1bda07f6d673 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -304,7 +304,7 @@ sub get_ktest_configs { } sub process_variables { - my ($value) = @_; + my ($value, $remove_undef) = @_; my $retval = ""; # We want to check for '\', and it is just easier @@ -322,6 +322,10 @@ sub process_variables { $retval = "$retval$begin"; if (defined($variable{$var})) { $retval = "$retval$variable{$var}"; + } elsif (defined($remove_undef) && $remove_undef) { + # for if statements, any variable that is not defined, + # we simple convert to 0 + $retval = "${retval}0"; } else { # put back the origin piece. $retval = "$retval\$\{$var\}"; @@ -403,10 +407,40 @@ sub value_defined { defined($opt{$2}); } -sub process_if { - my ($name, $value) = @_; +my $d = 0; +sub process_expression { + my ($name, $val) = @_; - my $val = process_variables($value); + my $c = $d++; + + while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) { + my $express = $1; + + if (process_expression($name, $express)) { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /; + } else { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /; + } + } + + $d--; + my $OR = "\\|\\|"; + my $AND = "\\&\\&"; + + while ($val =~ s/^(.*?)($OR|$AND)//) { + my $express = $1; + my $op = $2; + + if (process_expression($name, $express)) { + if ($op eq "||") { + return 1; + } + } else { + if ($op eq "&&") { + return 0; + } + } + } if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { my $ret = process_compare($1, $2, $3); @@ -431,7 +465,16 @@ sub process_if { } die ("$name: $.: Undefined content $val in if statement\n"); - return 1; +} + +sub process_if { + my ($name, $value) = @_; + + # Convert variables and replace undefined ones with 0 + my $val = process_variables($value, 1); + my $ret = process_expression $name, $val; + + return $ret; } sub __read_config { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 7b49f07b6423..dbedfa196727 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -154,6 +154,16 @@ # MAKE_CMD := make ARCH=x86 # # +# And/or ops (&&,||) may also be used to make complex conditionals. +# +# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf +# +# Notice the use of paranthesis. Without any paranthesis the above would be +# processed the same as: +# +# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf) +# +# # # INCLUDE file # From c54367f9d6be8e19c6e98ae7038438f0377ee138 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 20 Oct 2011 09:56:41 -0400 Subject: [PATCH 071/692] ktest: Do not opencode reboot in grub setting When setting the next kernel to boot to with grub, do not opencode the reboot operation. The normal reboot operation can be modified by config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect all reboots. Remove the opencoded reboot to make sure that any changes to the reboot code also affect all reboots. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 1bda07f6d673..d60c496fb514 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1150,7 +1150,8 @@ sub wait_for_input sub reboot_to { if ($reboot_type eq "grub") { - run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'"; + run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + reboot; return; } From 9f7424cc86adf55c3fccaa1160b6cf5c6cfc4c02 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 22 Oct 2011 08:58:19 -0400 Subject: [PATCH 072/692] ktest: Add another monitor flush before installing kernel On some tests that do multiple boots (patchcheck, bisect, etc), the build of the next kernel to run may finish before the stable kernel has finished booting. Then the install of the new kernel will fail when it tries to connect as the machine has not finished the boot process. Do one more monitor flush to make sure the machine is up and running before trying to connect to it again. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index d60c496fb514..652446dd9e79 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1391,6 +1391,11 @@ sub get_version { } sub start_monitor_and_boot { + # Make sure the stable kernel has finished booting + start_monitor; + wait_for_monitor 5; + end_monitor; + get_grub_index; get_version; install; From 7bf5107347d94bb056c5a0cf78f09e499c3d8f48 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 22 Oct 2011 09:07:03 -0400 Subject: [PATCH 073/692] ktest: Add variable ${PWD} Adding the variable ${PWD} that equals `pwd` makes the config files much simpler. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 652446dd9e79..9d9ee321a3dc 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -136,6 +136,9 @@ my %force_config; # do not force reboots on config problems my $no_reboot = 1; +# default variables that can be used +chomp ($variable{"PWD"} = `pwd`); + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF From 815e2bd7d609da9c7615ea28a3990064a394312f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 28 Oct 2011 07:01:40 -0400 Subject: [PATCH 074/692] ktest: Evaluate variables entered on the command line When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 9d9ee321a3dc..30e2befd6f2a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -250,6 +250,7 @@ sub read_yn { sub get_ktest_config { my ($config) = @_; + my $ans; return if (defined($opt{$config})); @@ -263,16 +264,17 @@ sub get_ktest_config { if (defined($default{$config})) { print "\[$default{$config}\] "; } - $entered_configs{$config} = ; - $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/; - if ($entered_configs{$config} =~ /^\s*$/) { + $ans = ; + $ans =~ s/^\s*(.*\S)\s*$/$1/; + if ($ans =~ /^\s*$/) { if ($default{$config}) { - $entered_configs{$config} = $default{$config}; + $ans = $default{$config}; } else { print "Your answer can not be blank\n"; next; } } + $entered_configs{$config} = process_variables($ans); last; } } From f74974c763c872d65da4062a14f4e73c77a0b577 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 17:27:51 +0200 Subject: [PATCH 075/692] drm/i915: disable temporal dithering on the internal panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i'm getting tempted to just disable temporal Approved. apparently it makes the screen look pulse-y which is worse than the disease. References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.html Tested-by: Олег Герман Reviewed-by: Adam Jackson Signed-off-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 981b1f1c04d8..b75bd93cf59b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5671,7 +5671,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); From 80a2901d2a59946d098c4479d650d0c3c82c3d85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 10:59:05 +0200 Subject: [PATCH 076/692] drm/i915: only match on PCI_BASE_CLASS_DISPLAY ... not DISPLAY_VGA, because we ignore the VGA subclass with our class_mask. It confused me until Chris Wilson clued me up. Signed-off-by: Daniel Vetter Reviewed-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4c8d681c2151..548e04bade3c 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -106,7 +106,7 @@ static struct drm_driver driver; extern int intel_agp_enabled; #define INTEL_VGA_DEVICE(id, info) { \ - .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class = PCI_BASE_CLASS_DISPLAY << 16, \ .class_mask = 0xff0000, \ .vendor = 0x8086, \ .device = id, \ From 828204903945002be837d938401e242978b7b505 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 10 Oct 2011 16:33:34 -0400 Subject: [PATCH 077/692] drm/i915: intel_choose_pipe_bpp_dither messages should be DRM_DEBUG_KMS Shouldn't hide these behind _DRIVER, they're all KMS-related. Signed-off-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b75bd93cf59b..9fa342e89454 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4711,7 +4711,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4722,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4737,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,10 +4748,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } @@ -4789,8 +4789,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; From 3fca806cf343155d0bb0dfbdbc2e51ef47b65750 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: [PATCH 078/692] drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8096ca..3a8d44886010 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); From c5e62bdd73da80e1017058c923336a5a150af9f2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: [PATCH 079/692] agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky --- drivers/char/agp/intel-gtt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d44886010..c92424ca1a55 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } From f0eb824beee3f596b9799e667a6fdac3116e9f7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:31:59 +0200 Subject: [PATCH 080/692] gpio: pca953x: remove unneeded check for chip type We can assume our own device_id table is correct, so remove checking if the chip type is valid. (The check was bogus anyway: If it found an invalid entry, it returned with 0!) This is in preparation for further cleanups. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index c43b8ff626a7..45de6a4ac632 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -673,10 +673,8 @@ static int __devinit pca953x_probe(struct i2c_client *client, if (chip->chip_type == PCA953X_TYPE) device_pca953x_init(chip, invert); - else if (chip->chip_type == PCA957X_TYPE) - device_pca957x_init(chip, invert); else - goto out_failed; + device_pca957x_init(chip, invert); ret = pca953x_irq_setup(chip, id, irq_base); if (ret) From 7ea2aa2046a15af1c048115e7c05f1ba1566899d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:32:00 +0200 Subject: [PATCH 081/692] gpio: pca953x: propagate the errno from the chip_init functions Initializing the chips may return with an error, but this error gets dropped in probe(). Propagate this further to the driver core. Also, simplify returning the error in one of the init functions. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 45de6a4ac632..a3fef0c94ba6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -595,9 +595,6 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert) /* set platform specific polarity inversion */ ret = pca953x_write_reg(chip, PCA953X_INVERT, invert); - if (ret) - goto out; - return 0; out: return ret; } @@ -639,7 +636,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, struct pca953x_platform_data *pdata; struct pca953x_chip *chip; int irq_base=0, invert=0; - int ret = 0; + int ret; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); if (chip == NULL) @@ -672,9 +669,11 @@ static int __devinit pca953x_probe(struct i2c_client *client, pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) - device_pca953x_init(chip, invert); + ret = device_pca953x_init(chip, invert); else - device_pca957x_init(chip, invert); + ret = device_pca957x_init(chip, invert); + if (ret) + goto out_failed; ret = pca953x_irq_setup(chip, id, irq_base); if (ret) From 0d52f54e2ef64c189dedc332e680b2eb4a34590a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 22 Oct 2011 00:43:38 +0200 Subject: [PATCH 082/692] PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 596172b4ae95..fce1c54a0c8d 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -459,8 +459,17 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; + struct acpi_pci_root *root; acpi_handle dummy_handle; + /* + * We shouldn't use this bridge if PCIe native hotplug control has been + * granted by the BIOS for it. + */ + root = acpi_pci_find_root(handle); + if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return -ENODEV; + /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1376,13 +1385,23 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { + struct acpi_pci_root *root; int *count = (int *)context; - if (acpi_is_root_bridge(handle)) { - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - handle_hotplug_event_bridge, NULL); - (*count)++; - } + if (!acpi_is_root_bridge(handle)) + return AE_OK; + + root = acpi_pci_find_root(handle); + if (!root) + return AE_OK; + + if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) + return AE_OK; + + (*count)++; + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge, NULL); + return AE_OK ; } From 466b3ddfbcf4f5ce402a77397630a0fa9ea9ce6b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:08 +0100 Subject: [PATCH 083/692] PCI: Fix compile errors with PCI_ATS and !PCI_IOV The ats and sroiv members of 'struct pci_dev' are required for the ATS code already, even without IOV support compiled in. So depend on ATS here. This is fine with PCI_IOV too because it selects PCI_ATS. Also the prototypes for ATS need to be available for PCI_ATS. Reported-by: Randy Dunlap Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes --- include/linux/pci-ats.h | 6 +++--- include/linux/pci.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index e3d0b3890249..7ef68724f0f0 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -12,7 +12,7 @@ struct pci_ats { unsigned int is_enabled:1; /* Enable bit is set */ }; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); @@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return dev->ats && dev->ats->is_enabled; } -#else /* CONFIG_PCI_IOV */ +#else /* CONFIG_PCI_ATS */ static inline int pci_enable_ats(struct pci_dev *dev, int ps) { @@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return 0; } -#endif /* CONFIG_PCI_IOV */ +#endif /* CONFIG_PCI_ATS */ #ifdef CONFIG_PCI_PRI diff --git a/include/linux/pci.h b/include/linux/pci.h index 337df0d5d5f7..7cda65b5f798 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_dev { struct list_head msi_list; #endif struct pci_vpd *vpd; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* SR-IOV capability related */ struct pci_dev *physfn; /* the PF this VF is associated with */ From c54420d3302d30999060e2669d0800b85e5b5a20 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:07 +0100 Subject: [PATCH 084/692] PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes --- drivers/pci/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index cec66064ee4b..8252fc3430bd 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -87,6 +87,7 @@ config PCI_IOV config PCI_PRI bool "PCI PRI support" + depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are From 51ce185af0f71b65c23ed719f72d0241895a61da Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 1 Nov 2011 00:51:30 -0700 Subject: [PATCH 085/692] sparc: Hook up process_vm_{readv,writev} syscalls. Signed-off-by: David S. Miller --- arch/sparc/include/asm/unistd.h | 4 +++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 6260d5deeabc..c7cb0af0eb59 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -406,8 +406,10 @@ #define __NR_syncfs 335 #define __NR_sendmmsg 336 #define __NR_setns 337 +#define __NR_process_vm_readv 338 +#define __NR_process_vm_writev 339 -#define NR_syscalls 338 +#define NR_syscalls 340 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 09d8ec454450..63402f9e9f51 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index edbec45d4688..db86b1a0e9a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg, sys_setns + .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg, sys_setns + .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev From 627f7675f0f530ea555d76543dc4e469d70a1532 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 31 Oct 2011 11:30:10 -0700 Subject: [PATCH 086/692] drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work Use of the struct_mutex is not correct for locking in mode setting paths. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc1a0832af4f..7259034b33d1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -971,9 +971,9 @@ static void ironlake_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp->base.base.dev; - mutex_lock(&dev->struct_mutex); + mutex_lock(&dev->mode_config.mutex); ironlake_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); } static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) From ff56b0bc84c01fb2c5d2ec6438becfe0f5f2f78f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: [PATCH 087/692] drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36b6e8a..d18b07adcffa 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { From fb223c32b4d3ee593c8dce07e983680d06abe387 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Wed, 2 Nov 2011 09:15:16 +1100 Subject: [PATCH 088/692] crypto: user - Fix rwsem leak in crypto_user The list_empty case in crypto_alg_match() will return without calling up_read() on crypto_alg_sem. We could do the "goto out" routine, but the function will clearly do the right thing with that test simply removed. Signed-off-by: Jonathan Corbet Signed-off-by: Herbert Xu --- crypto/crypto_user.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c index 2abca780312d..0605a2bbba75 100644 --- a/crypto/crypto_user.c +++ b/crypto/crypto_user.c @@ -44,9 +44,6 @@ static struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact) down_read(&crypto_alg_sem); - if (list_empty(&crypto_alg_list)) - return NULL; - list_for_each_entry(q, &crypto_alg_list, cra_list) { int match = 0; From 47a6770ac6cd0d28f14dd9e1b17705abe6f05e41 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 09:35:19 -0700 Subject: [PATCH 089/692] msm: boards: Fix fallout from removal of machine_desc in fixup After 0744a3ee (ARM: platform fixups: remove mdesc argument to fixup function, 2010-12-20) the fixup functions introduced in 9e775ad (ARM: 7012/1: Set proper TEXT_OFFSET for newer MSMs, 2011-08-12) cause warnings like: arch/arm/mach-msm/board-msm8x60.c:85: warning: initialization from incompatible pointer type Fix them by removing the machine_desc argument from the fixup functions. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm7x30.c | 4 ++-- arch/arm/mach-msm/board-msm8960.c | 4 ++-- arch/arm/mach-msm/board-msm8x60.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 71de5062c71e..db81ed531031 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -42,8 +42,8 @@ extern struct sys_timer msm_timer; -static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm7x30_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index b04468e7d00e..6dc1cbd2a595 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -32,8 +32,8 @@ #include "devices.h" -static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8960_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 106170fb1844..eed73e2609ed 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -30,8 +30,8 @@ #include #include -static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8x60_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && From f43d623164022dcbf6750ef220b7a1133a1183eb Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 20 Oct 2011 23:52:14 -0400 Subject: [PATCH 090/692] usb, xhci: fix lockdep warning on endpoint timeout While debugging a usb3 problem, I stumbled upon this lockdep warning. Oct 18 21:41:17 dhcp47-74 kernel: ================================= Oct 18 21:41:17 dhcp47-74 kernel: [ INFO: inconsistent lock state ] Oct 18 21:41:17 dhcp47-74 kernel: 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: --------------------------------- Oct 18 21:41:17 dhcp47-74 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Oct 18 21:41:17 dhcp47-74 kernel: swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: Oct 18 21:41:17 dhcp47-74 kernel: (&(&xhci->lock)->rlock){?.-...}, at: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: {IN-HARDIRQ-W} state was registered at: Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x781/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_irq+0x3a/0x1960 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_msi_irq+0x31/0x40 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event_percpu+0x85/0x320 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event+0x48/0x70 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_edge_irq+0x6d/0x130 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq+0x49/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] do_IRQ+0x5d/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] ret_from_intr+0x0/0x13 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_set_device_state+0x8a/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_add_hcd+0x2b8/0x730 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_pci_probe+0x9e/0xd4 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] local_pci_probe+0x5f/0xd0 Oct 18 21:41:17 dhcp47-74 kernel: [] pci_device_probe+0x119/0x120 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_probe_device+0xa3/0x2c0 Oct 18 21:41:17 dhcp47-74 kernel: [] __driver_attach+0xab/0xb0 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_for_each_dev+0x6c/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_attach+0x1e/0x20 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_add_driver+0x1f8/0x2b0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_register+0x76/0x140 Oct 18 21:41:17 dhcp47-74 kernel: [] __pci_register_driver+0x66/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0x4a/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0xe/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] do_one_initcall+0x43/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] sys_init_module+0x92/0x1f0 Oct 18 21:41:17 dhcp47-74 kernel: [] system_call_fastpath+0x16/0x1b Oct 18 21:41:17 dhcp47-74 kernel: irq event stamp: 631984 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last enabled at (631984): [] _raw_spin_unlock_irq+0x30/0x50 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last disabled at (631983): [] _raw_spin_lock_irq+0x19/0x90 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last enabled at (631980): [] _local_bh_enable+0x13/0x20 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last disabled at (631981): [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: other info that might help us debug this: Oct 18 21:41:17 dhcp47-74 kernel: Possible unsafe locking scenario: Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: CPU0 Oct 18 21:41:17 dhcp47-74 kernel: ---- Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: *** DEADLOCK *** Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: 1 lock held by swapper/0: Oct 18 21:41:17 dhcp47-74 kernel: #0: (&ep->stop_cmd_timer){+.-...}, at: [] run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: stack backtrace: Oct 18 21:41:17 dhcp47-74 kernel: Pid: 0, comm: swapper Tainted: G W 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: Call Trace: Oct 18 21:41:17 dhcp47-74 kernel: [] print_usage_bug+0x227/0x270 Oct 18 21:41:17 dhcp47-74 kernel: [] mark_lock+0x346/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x61e/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] ? mark_lock+0x213/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] run_timer_softirq+0x20d/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_queue_isoc_tx_prepare+0x8e0/0x8e0 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] __do_softirq+0xf2/0x3f0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? lapic_next_event+0x1d/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] ? clockevents_program_event+0x5e/0x90 Oct 18 21:41:17 dhcp47-74 kernel: [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] do_softirq+0x8d/0xc0 Oct 18 21:41:17 dhcp47-74 kernel: [] irq_exit+0xe5/0x100 Oct 18 21:41:17 dhcp47-74 kernel: [] smp_apic_timer_interrupt+0x6e/0x99 Oct 18 21:41:17 dhcp47-74 kernel: [] apic_timer_interrupt+0x70/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? trace_hardirqs_off+0xd/0x10 Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x227/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x222/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] cpuidle_idle_call+0x103/0x290 Oct 18 21:41:17 dhcp47-74 kernel: [] cpu_idle+0xe5/0x160 Oct 18 21:41:17 dhcp47-74 kernel: [] rest_init+0xe0/0xf0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? csum_partial_copy_generic+0x170/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] start_kernel+0x3fc/0x407 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_reservations+0x131/0x135 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_kernel+0xed/0xf4 Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: HC died; cleaning up Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -110 Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -22 Oct 18 21:41:17 dhcp47-74 kernel: hub 3-0:1.0: cannot disable port 4 (err = -19) Basically what is happening is in xhci_stop_endpoint_command_watchdog() the xhci->lock is grabbed with just spin_lock. What lockdep deduces is that if an interrupt occurred while in this function it would deadlock with xhci_irq because that function also grabs the xhci->lock. Fixing it is trivial by using spin_lock_irqsave instead. This should be queued to stable kernels as far back as 2.6.33. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 940321b3ec68..9f1d4b15d818 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) struct xhci_ring *ring; struct xhci_td *cur_td; int ret, i, j; + unsigned long flags; ep = (struct xhci_virt_ep *) arg; xhci = ep->xhci; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg(xhci, "Stop EP timer ran, but another timer marked " "xHCI as DYING, exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg(xhci, "Stop EP timer ran, but no command pending, " "exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) xhci->xhc_state |= XHCI_STATE_DYING; /* Disable interrupts from the host controller and start halting it */ xhci_quiesce(xhci); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); ret = xhci_halt(xhci); - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are @@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } } - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Calling usb_hc_died()\n"); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); From 86f14df8ed1ecec5cefe7d002b4d297e298238c2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 2 Nov 2011 21:36:32 +0000 Subject: [PATCH 091/692] ASoC: Update git repository URL Remove the -2.6 from the name. Signed-off-by: Mark Brown --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index bbf42cd74e2a..63b58dd1561e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6001,7 +6001,7 @@ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood M: Mark Brown -T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported From c75d720fca8a91ce99196d33adea383621027bf2 Mon Sep 17 00:00:00 2001 From: Edward Donovan Date: Tue, 1 Nov 2011 15:29:44 -0400 Subject: [PATCH 092/692] genirq: Fix irqfixup, irqpoll regression commit d05c65fff0 ("genirq: spurious: Run only one poller at a time") introduced a regression, leaving the boot options 'irqfixup' and 'irqpoll' non-functional. The patch placed tests in each function, to exit if the function is already running. The test in 'misrouted_irq' exited when it should have proceeded, effectively disabling 'misrouted_irq' and 'poll_spurious_irqs'. The check for an already running poller needs to be "!= 1" not "== 1" as "1" is the value when the first poller starts running. Signed-off-by: Edward Donovan Cc: maciej.rutecki@gmail.com Link: http://lkml.kernel.org/r/1320175784-6745-1-git-send-email-edward.donovan@numble.net Cc: stable@vger.kernel.org # >= 2.6.39 Signed-off-by: Thomas Gleixner --- kernel/irq/spurious.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index aa57d5da18c1..b5f4742693c0 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -115,7 +115,7 @@ static int misrouted_irq(int irq) struct irq_desc *desc; int i, ok = 0; - if (atomic_inc_return(&irq_poll_active) == 1) + if (atomic_inc_return(&irq_poll_active) != 1) goto out; irq_poll_cpu = smp_processor_id(); From 616fdb5afb12b4d5bb9e36df40d039e86aaaefc2 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 5 Oct 2011 11:44:54 -0700 Subject: [PATCH 093/692] drm/i915: forcewake warning fixes in debugfs Some more unsafe debugfs access are fixed with this patch. I tested all reads, but didn't thoroughly test the writes. Cc: "Nicolas Kalkhof" Signed-off-by: Ben Widawsky Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 57 ++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 8e95d66800b0..f2e02075d510 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -635,11 +635,16 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; + int ret; ring = &dev_priv->ring[(uintptr_t)node->info_ent->data]; if (ring->size == 0) return 0; + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + seq_printf(m, "Ring %s:\n", ring->name); seq_printf(m, " Head : %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR); seq_printf(m, " Tail : %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR); @@ -653,6 +658,8 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Control : %08x\n", I915_READ_CTL(ring)); seq_printf(m, " Start : %08x\n", I915_READ_START(ring)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -841,7 +848,16 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u16 crstanddelay = I915_READ16(CRSTANDVID); + u16 crstanddelay; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + crstanddelay = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f)); @@ -939,7 +955,11 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 delayfreq; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 0; i < 16; i++) { delayfreq = I915_READ(PXVFREQ_BASE + i * 4); @@ -947,6 +967,8 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -961,13 +983,19 @@ static int i915_inttoext_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 inttoext; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 1; i <= 32; i++) { inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4); seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -976,9 +1004,19 @@ static int i915_drpc_info(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u32 rgvmodectl = I915_READ(MEMMODECTL); - u32 rstdbyctl = I915_READ(RSTDBYCTL); - u16 crstandvid = I915_READ16(CRSTANDVID); + u32 rgvmodectl, rstdbyctl; + u16 crstandvid; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + rgvmodectl = I915_READ(MEMMODECTL); + rstdbyctl = I915_READ(RSTDBYCTL); + crstandvid = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ? "yes" : "no"); @@ -1166,9 +1204,16 @@ static int i915_gfxec(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4)); + mutex_unlock(&dev->struct_mutex); + return 0; } From 775d17b6ca4357048f36c22151335addfe15db4b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:01 +0200 Subject: [PATCH 094/692] drm/i915: Ivybridge still has fences! So don't forget to restore them on resume and dump them into the error state. Cc: stable@kernel.org Signed-off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_irq.c | 1 + drivers/gpu/drm/i915/i915_suspend.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9ee2729fe5c6..b40004b55977 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -824,6 +824,7 @@ static void i915_gem_record_fences(struct drm_device *dev, /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index f8f602d76650..7886e4fb60e3 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -370,6 +370,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); @@ -404,6 +405,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]); From 4b9de737fad5bd8993e6070530802de22f32744d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:02 +0200 Subject: [PATCH 095/692] drm/i915: add constants to size fence arrays and fields In preparation of to support 32 fences on Ivybdrigde. Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.h | 15 ++++++++------- drivers/gpu/drm/i915/i915_gem.c | 4 ++-- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 06a37f4fd74b..d2da91f90252 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -126,6 +126,9 @@ struct drm_i915_master_private { struct _drm_i915_sarea *sarea_priv; }; #define I915_FENCE_REG_NONE -1 +#define I915_MAX_NUM_FENCES 16 +/* 16 fences + sign bit for FENCE_REG_NONE */ +#define I915_MAX_NUM_FENCE_BITS 5 struct drm_i915_fence_reg { struct list_head lru_list; @@ -168,7 +171,7 @@ struct drm_i915_error_state { u32 instdone1; u32 seqno; u64 bbaddr; - u64 fence[16]; + u64 fence[I915_MAX_NUM_FENCES]; struct timeval time; struct drm_i915_error_object { int page_count; @@ -182,7 +185,7 @@ struct drm_i915_error_state { u32 gtt_offset; u32 read_domains; u32 write_domain; - s32 fence_reg:5; + s32 fence_reg:I915_MAX_NUM_FENCE_BITS; s32 pinned:2; u32 tiling:2; u32 dirty:1; @@ -375,7 +378,7 @@ typedef struct drm_i915_private { struct notifier_block lid_notifier; int crt_ddc_pin; - struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ + struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ @@ -506,7 +509,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; - uint64_t saveFENCE[16]; + uint64_t saveFENCE[I915_MAX_NUM_FENCES]; u32 saveCURACNTR; u32 saveCURAPOS; u32 saveCURABASE; @@ -777,10 +780,8 @@ struct drm_i915_gem_object { * Fence register bits (if any) for this object. Will be set * as needed when mapped into the GTT. * Protected by dev->struct_mutex. - * - * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE) */ - signed int fence_reg:5; + signed int fence_reg:I915_MAX_NUM_FENCE_BITS; /** * Advice: are the backing pages purgeable? diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d18b07adcffa..a83859767d48 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1745,7 +1745,7 @@ static void i915_gem_reset_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - for (i = 0; i < 16; i++) { + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct drm_i915_gem_object *obj = reg->obj; @@ -3877,7 +3877,7 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.gtt_list); for (i = 0; i < I915_NUM_RINGS; i++) init_ring_lists(&dev_priv->ring[i]); - for (i = 0; i < 16; i++) + for (i = 0; i < I915_MAX_NUM_FENCES; i++) INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); From a918feef334090692ea65e77a8b0cca5e682e666 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 2 Nov 2011 17:30:49 +0000 Subject: [PATCH 096/692] ARM: mxc: fix local timer interrupt handling As local timer interrupts are now handled as normal interrupts, remove the special case in the GIC handler. Cc: Shawn Guo Cc: Sascha Hauer Signed-off-by: Marc Zyngier Tested-and-Acked-by: Shawn Guo --- arch/arm/plat-mxc/gic.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c index b3b8eed263b8..12f8f8109010 100644 --- a/arch/arm/plat-mxc/gic.c +++ b/arch/arm/plat-mxc/gic.c @@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) if (irqnr == 1023) break; - if (irqnr > 29 && irqnr < 1021) + if (irqnr > 15 && irqnr < 1021) handle_IRQ(irqnr, regs); #ifdef CONFIG_SMP - else if (irqnr < 16) { + else { writel_relaxed(irqstat, gic_cpu_base_addr + GIC_CPU_EOI); handle_IPI(irqnr, regs); } -#endif -#ifdef CONFIG_LOCAL_TIMERS - else if (irqnr == 29) { - writel_relaxed(irqstat, gic_cpu_base_addr + - GIC_CPU_EOI); - handle_local_timer(regs); - } #endif } while (1); } From 98de0cbbe2e7157fd87d04386621be3eadd4d6ab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:26 +0800 Subject: [PATCH 097/692] ARM:i.MX: fix build error in tzic/avic.c arch/arm/plat-mxc/tzic.c:105: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'tzic_handle_irq' Signed-off-by: Jason Liu --- arch/arm/plat-mxc/avic.c | 1 + arch/arm/plat-mxc/tzic.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 8875fb415f68..55f15699a383 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "irq-common.h" diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index e993a184189a..a3c164c7ba82 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include From 188d7c6b0cfee134cc7fbc61d36223b1d7dfffab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:27 +0800 Subject: [PATCH 098/692] ARM:i.MX: fix build error in clock-mx51-mx53.c arch/arm/mach-mx5/clock-mx51-mx53.c: In function 'clk_get_freq_dt': arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: implicit declaration of function 'for_each_compatible_node' arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: expected ';' before '{' token Signed-off-by: Jason Liu --- arch/arm/mach-mx5/clock-mx51-mx53.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 2aacf41c48e7..6312425c0056 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, return 0; } +#ifdef CONFIG_OF static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc, unsigned long *ckih1, unsigned long *ckih2) { @@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void) clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); return mx53_clocks_init(ckil, osc, ckih1, ckih2); } +#endif From 680da876f44a644aee891e1d0df5a560cfa4720e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 3 Nov 2011 14:15:13 -0700 Subject: [PATCH 099/692] drm/i915: enable cacheable objects on Ivybridge IVB supports these bits as well. Signed-off-by: Jesse Barnes Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a83859767d48..ed0b68fdb970 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3613,7 +3613,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, obj->base.write_domain = I915_GEM_DOMAIN_CPU; obj->base.read_domains = I915_GEM_DOMAIN_CPU; - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* On Gen6, we can have the GPU use the LLC (the CPU * cache) for about a 10% performance improvement * compared to uncached. Graphics requests other than From 15394cad2747ea2d98fc88ccb464973e173cd2f8 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Fri, 4 Nov 2011 20:30:18 +0800 Subject: [PATCH 100/692] ARM: mxc: Remove test_for_ltirq The patch "ARM: gic: consolidate PPI handling" removes the usage of test_for_ltirq. After the merge of imx6q remove this there, too. Cc: Sascha Hauer Signed-off-by: Dirk Behme Acked-by: Shawn Guo Acked-by: Marc Zyngier --- arch/arm/plat-mxc/include/mach/entry-macro.S | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 9fe0dfcf4e7e..ca5cf26a04b1 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -25,6 +25,3 @@ .macro test_for_ipi, irqnr, irqstat, base, tmp .endm - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm From dfd3b596fbbfa48b8e7966ef996d587157554b69 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 4 Nov 2011 22:13:50 +0900 Subject: [PATCH 101/692] sh: Fix cached/uncaced address calculation in 29bit mode In the case of 29bit mode, CAC/UNCAC_ADDR does not return a right address. This revises this problem by using P1SEGADDR and P2SEGADDR in 29bit mode. Reported-by: Yutaro Ebihara Signed-off-by: Nobuhiro Iwamatsu Tested-by: Kuninori Morimoto Tested-by: Simon Horman Cc: stable@kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/page.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index 0dca9a5c6be6..15d970328f71 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -151,8 +151,13 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_UNCACHED_MAPPING +#if defined(CONFIG_29BIT) +#define UNCAC_ADDR(addr) P2SEGADDR(addr) +#define CAC_ADDR(addr) P1SEGADDR(addr) +#else #define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start) #define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET) +#endif #else #define UNCAC_ADDR(addr) ((addr)) #define CAC_ADDR(addr) ((addr)) From 3af1f8a41feab47b232b0c3d3b2322426672480d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 3 Oct 2011 15:16:47 +0100 Subject: [PATCH 102/692] serial: sh-sci: Fix up SH-2A SCIF support. This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy Tested-by: Federico Fuga Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 16 ++++++++++++---- drivers/tty/serial/sh-sci.c | 19 +++++++++++++++++++ include/linux/serial_sci.h | 1 + 3 files changed, 32 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index a43124e608c3..0bd744f9a3b7 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -176,10 +176,12 @@ static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 192, 192, 192, 192 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -193,10 +195,12 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 196, 196, 196, 196 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -210,10 +214,12 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 200, 200, 200, 200 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -227,10 +233,12 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 204, 204, 204, 204 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9871c57b348e..1b6ec568f32a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -206,6 +206,25 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCLSR] = sci_reg_invalid, }, + /* + * Common SH-2(A) SCIF definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + /* * Common SH-3 SCIF definitions. */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 8bffe9ae2ca0..5f3939c67dd8 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -67,6 +67,7 @@ enum { SCIx_IRDA_REGTYPE, SCIx_SCIFA_REGTYPE, SCIx_SCIFB_REGTYPE, + SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, From dd2c0ca1b153b555c09fd8e08f6842e12cf8e87b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 19 Sep 2011 18:51:13 -0700 Subject: [PATCH 103/692] sh: clkfwk: add clk_rate_mult_range_round() This provides a clk_rate_mult_range_round() helper for use by some of the CPG PLL ranged multipliers, following the same approach as used by the div ranges. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/core.c | 20 ++++++++++++++++++++ include/linux/sh_clk.h | 3 +++ 2 files changed, 23 insertions(+) diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index dc8d022c07a1..352036b1f9a2 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -173,6 +173,26 @@ long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, return clk_rate_round_helper(&div_range_round); } +static long clk_rate_mult_range_iter(unsigned int pos, + struct clk_rate_round_data *rounder) +{ + return clk_get_rate(rounder->arg) * pos; +} + +long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min, + unsigned int mult_max, unsigned long rate) +{ + struct clk_rate_round_data mult_range_round = { + .min = mult_min, + .max = mult_max, + .func = clk_rate_mult_range_iter, + .arg = clk_get_parent(clk), + .rate = rate, + }; + + return clk_rate_round_helper(&mult_range_round); +} + int clk_rate_table_find(struct clk *clk, struct cpufreq_frequency_table *freq_table, unsigned long rate) diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 3ccf18648d0a..9237c299641c 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -94,6 +94,9 @@ int clk_rate_table_find(struct clk *clk, long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, unsigned int div_max, unsigned long rate); +long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min, + unsigned int mult_max, unsigned long rate); + long clk_round_parent(struct clk *clk, unsigned long target, unsigned long *best_freq, unsigned long *parent_freq, unsigned int div_min, unsigned int div_max); From d31c285b3a71cf9056e6a060de41f37780b0af86 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 3 Nov 2011 13:06:08 -0700 Subject: [PATCH 104/692] xhci: Set slot and ep0 flags for address command. Matt's AsMedia xHCI host controller was responding with a Context Error to an address device command after a configured device reset. Some sequence of events leads both the slot and endpoint zero add flags cleared to zero, which the AsMedia host doesn't like: [ 223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags [ 223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags [ 223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0] [ 223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1] [ 223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2] [ 223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3] [ 223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4] [ 223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5] [ 223.701858] xhci_hcd 0000:03:00.0: Slot Context: [ 223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info [ 223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2 [ 223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info [ 223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state [ 223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0] [ 223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1] [ 223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2] [ 223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3] [ 223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context: [ 223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info [ 223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2 [ 223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq [ 223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info [ 223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0] [ 223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1] [ 223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2] ... [ 223.701927] xhci_hcd 0000:03:00.0: // Ding dong! [ 223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1. The xHCI spec says that both flags must be set to one for the Address Device command. When the device is first enumerated, xhci_setup_addressable_virt_dev() does set those flags. However, when the device is addressed after it has been reset in the configured state, xhci_setup_addressable_virt_dev() is not called, and xhci_copy_ep0_dequeue_into_input_ctx() is called instead. That function relies on the flags being set up by previous commands, which apparently isn't a good assumption. Move the setting of the flags into the common parent function. This should be queued for stable kernels as old as 2.6.35, since that was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx. Signed-off-by: Sarah Sharp Tested-by: Matt Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 5 ----- drivers/usb/host/xhci.c | 5 ++++- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 42a22b8e6922..0e4b25fa3bcd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - struct xhci_input_control_ctx *ctrl_ctx; u32 port_num; struct usb_device *top_dev; @@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return -EINVAL; } ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); - ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); - /* 2) New slot context and endpoint 0 context are valid*/ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); - /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1ff95a0df576..747c5ead922b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3504,6 +3504,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* Otherwise, update the control endpoint ring enqueue pointer. */ else xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); @@ -3585,7 +3589,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; From 79c3dd8150fd5236d95766a9e662e3e932b462c9 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 3 Nov 2011 09:07:18 -0400 Subject: [PATCH 105/692] usb, xhci: Clear warm reset change event during init I noticed on my Panther Point system that I wasn't getting hotplug events for my usb3.0 disk on a usb3 port. I tracked it down to the fact that the system had the warm reset change bit still set. This seemed to block future events from being received, including a hotplug event. Clearing this bit during initialization allowed the hotplug event to be received and the disk to be recognized correctly. This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 96f05b29c9ad..79781461eec9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_PORT_LINK_STATE); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. */ From 1788ea6e3b2a58cf4fb00206e362d9caff8d86a7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:21 -0400 Subject: [PATCH 106/692] nfs: when attempting to open a directory, fall back on normal lookup (try #5) commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return from an OPEN call. Prior to that patch, that caused the client to fall back to doing a normal lookup. When that patch went in, the code began returning that error to userspace. The d_revalidate codepath however never had the corresponding change, so it was still possible to end up with a NULL ctx->state pointer after that. That patch caused a regression. When we attempt to open a directory that does not have a cached dentry, that open now errors out with EISDIR. If you attempt the same open with a cached dentry, it will succeed. Fix this by reverting the change in nfs_atomic_lookup and allowing attempts to open directories to fall back to a normal lookup Also, add a NFSv4-specific f_ops->open routine that just returns -ENOTDIR. This should never be called if things are working properly, but if it ever is, then the dprintk may help in debugging. To facilitate this, a new file_operations field is also added to the nfs_rpc_ops struct. Cc: stable@kernel.org Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 +- fs/nfs/file.c | 32 ++++++++++++++++++++++++++++++++ fs/nfs/inode.c | 2 +- fs/nfs/nfs3proc.c | 1 + fs/nfs/nfs4proc.c | 1 + fs/nfs/proc.c | 1 + include/linux/nfs_fs.h | 3 +++ include/linux/nfs_xdr.h | 1 + 8 files changed, 41 insertions(+), 2 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index b238d95ac48c..ac2899098147 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1468,12 +1468,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry res = NULL; goto out; /* This turned out not to be a regular file */ + case -EISDIR: case -ENOTDIR: goto no_open; case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) goto no_open; - /* case -EISDIR: */ /* case -EINVAL: */ default: res = ERR_CAST(inode); diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 0a1f8312b4dc..6d93e0754b5e 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -886,3 +886,35 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) file->f_path.dentry->d_name.name, arg); return -EINVAL; } + +#ifdef CONFIG_NFS_V4 +static int +nfs4_file_open(struct inode *inode, struct file *filp) +{ + /* + * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to + * this point, then something is very wrong + */ + dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp); + return -ENOTDIR; +} + +const struct file_operations nfs4_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs4_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; +#endif /* CONFIG_NFS_V4 */ diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index c07a55aec838..50a15fa8cf98 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -291,7 +291,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) */ inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops; if (S_ISREG(inode->i_mode)) { - inode->i_fop = &nfs_file_operations; + inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops; inode->i_data.a_ops = &nfs_file_aops; inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info; } else if (S_ISDIR(inode->i_mode)) { diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 85f1690ca08c..d4bc9ed91748 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -853,6 +853,7 @@ const struct nfs_rpc_ops nfs_v3_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs3_dir_inode_operations, .file_inode_ops = &nfs3_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs3_proc_get_root, .getattr = nfs3_proc_getattr, .setattr = nfs3_proc_setattr, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index b60fddf606f7..069cb8094d43 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6253,6 +6253,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = { .dentry_ops = &nfs4_dentry_operations, .dir_inode_ops = &nfs4_dir_inode_operations, .file_inode_ops = &nfs4_file_inode_operations, + .file_ops = &nfs4_file_operations, .getroot = nfs4_proc_get_root, .getattr = nfs4_proc_getattr, .setattr = nfs4_proc_setattr, diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index ac40b8535d7e..f48125da198a 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -710,6 +710,7 @@ const struct nfs_rpc_ops nfs_v2_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs_dir_inode_operations, .file_inode_ops = &nfs_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs_proc_get_root, .getattr = nfs_proc_getattr, .setattr = nfs_proc_setattr, diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index ab2c6343361a..92ecf5585fac 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations; extern const struct inode_operations nfs3_file_inode_operations; #endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_file_operations; +#ifdef CONFIG_NFS_V4 +extern const struct file_operations nfs4_file_operations; +#endif /* CONFIG_NFS_V4 */ extern const struct address_space_operations nfs_file_aops; extern const struct address_space_operations nfs_dir_aops; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index c74595ba7094..2a7c533be5dd 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1192,6 +1192,7 @@ struct nfs_rpc_ops { const struct dentry_operations *dentry_ops; const struct inode_operations *dir_inode_ops; const struct inode_operations *file_inode_ops; + const struct file_operations *file_ops; int (*getroot) (struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); From 0486958f57a496212e3c1e3d9194deebba3dc3d4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:22 -0400 Subject: [PATCH 107/692] nfs: move nfs_file_operations declaration to bottom of file.c (try #2) ...a remove a set of forward declarations. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/file.c | 59 +++++++++++++++++---------------------------------- 1 file changed, 19 insertions(+), 40 deletions(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6d93e0754b5e..eca56d4b39c0 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -40,48 +40,8 @@ #define NFSDBG_FACILITY NFSDBG_FILE -static int nfs_file_open(struct inode *, struct file *); -static int nfs_file_release(struct inode *, struct file *); -static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin); -static int nfs_file_mmap(struct file *, struct vm_area_struct *); -static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos, - struct pipe_inode_info *pipe, - size_t count, unsigned int flags); -static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe, - struct file *filp, loff_t *ppos, - size_t count, unsigned int flags); -static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static int nfs_file_flush(struct file *, fl_owner_t id); -static int nfs_file_fsync(struct file *, loff_t, loff_t, int datasync); -static int nfs_check_flags(int flags); -static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_setlease(struct file *file, long arg, struct file_lock **fl); - static const struct vm_operations_struct nfs_file_vm_ops; -const struct file_operations nfs_file_operations = { - .llseek = nfs_file_llseek, - .read = do_sync_read, - .write = do_sync_write, - .aio_read = nfs_file_read, - .aio_write = nfs_file_write, - .mmap = nfs_file_mmap, - .open = nfs_file_open, - .flush = nfs_file_flush, - .release = nfs_file_release, - .fsync = nfs_file_fsync, - .lock = nfs_lock, - .flock = nfs_flock, - .splice_read = nfs_file_splice_read, - .splice_write = nfs_file_splice_write, - .check_flags = nfs_check_flags, - .setlease = nfs_setlease, -}; - const struct inode_operations nfs_file_inode_operations = { .permission = nfs_permission, .getattr = nfs_getattr, @@ -887,6 +847,25 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) return -EINVAL; } +const struct file_operations nfs_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; + #ifdef CONFIG_NFS_V4 static int nfs4_file_open(struct inode *inode, struct file *filp) From 8eeea521d9d0fa6afd62df8c6e6566ee946117fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Nov 2011 15:52:31 +0000 Subject: [PATCH 108/692] ASoC: Don't use wm8994->control_data in wm8994_readable_register() The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6b73efd26991..3d2c3d4711d0 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = { static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = wm8994->control_data; + struct wm8994 *control = codec->control_data; switch (reg) { case WM8994_GPIO_1: From 5a3ad6bd6ae0687cb0ecb424d74221920fbc7f38 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Nov 2011 15:53:48 +0000 Subject: [PATCH 109/692] ASoC: Don't use wm8994->control_data when requesting IRQs The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 3d2c3d4711d0..9cb16cc853b3 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3180,9 +3180,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, wm8994_fifo_error, "FIFO error", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, wm8994_temp_warn, "Thermal warning", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, wm8994_temp_shut, "Thermal shutdown", codec); ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE, From 19940b3d55c87d8089a8cb0fa8e5a9918a3846bd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 19 Aug 2011 18:05:05 +0900 Subject: [PATCH 110/692] ASoC: Ensure we get an impedence reported for WM8958 jack detect Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/registers.h | 15 +++++++++++ sound/soc/codecs/wm8994.c | 37 +++++++++++++++++++--------- 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index fae295048a8b..83a9caec0e43 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -1962,6 +1962,21 @@ #define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */ #define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ +/* + * R210 (0xD2) - Mic Detect 3 + */ +#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8958_MICD_STS 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */ + /* * R76 (0x4C) - Charge Pump (1) */ diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 9cb16cc853b3..9c982e47eb99 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; - int reg; + int reg, count; - reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); - if (reg < 0) { - dev_err(codec->dev, "Failed to read mic detect status: %d\n", - reg); - return IRQ_NONE; - } + /* We may occasionally read a detection without an impedence + * range being provided - if that happens loop again. + */ + count = 10; + do { + reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); + if (reg < 0) { + dev_err(codec->dev, + "Failed to read mic detect status: %d\n", + reg); + return IRQ_NONE; + } - if (!(reg & WM8958_MICD_VALID)) { - dev_dbg(codec->dev, "Mic detect data not valid\n"); - goto out; - } + if (!(reg & WM8958_MICD_VALID)) { + dev_dbg(codec->dev, "Mic detect data not valid\n"); + goto out; + } + + if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK)) + break; + + msleep(1); + } while (count--); + + if (count == 0) + dev_warn(codec->dev, "No impedence range reported for jack\n"); #ifndef CONFIG_SND_SOC_WM8994_MODULE trace_snd_soc_jack_irq(dev_name(codec->dev)); From b42c909743595208f7987e331f0921b73af2ce25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomas=20Miljenovi=C4=87?= Date: Fri, 4 Nov 2011 23:59:49 -0700 Subject: [PATCH 111/692] Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index bb9f5d31f0d0..b4cfc6c8be89 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -431,6 +431,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; @@ -560,6 +567,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; From 15a2015fbc692e1c97d7ce12d96e077f5ae7ea6d Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sat, 5 Nov 2011 22:06:31 -0700 Subject: [PATCH 112/692] ceph: fix iput race when queueing inode work If we queue a work item that calls iput(), make sure we ihold() before attempting to queue work. Otherwise our queued work might miraculously run before we notice the queue_work() succeeded and call ihold(), allowing the inode to be destroyed. That is, instead of if (queue_work(...)) ihold(); we need to do ihold(); if (!queue_work(...)) iput(); Reported-by: Amon Ott Signed-off-by: Sage Weil --- fs/ceph/inode.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index e392bfce84a3..116f36502f17 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1328,12 +1328,13 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) */ void ceph_queue_writeback(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->wb_wq, &ceph_inode(inode)->i_wb_work)) { dout("ceph_queue_writeback %p\n", inode); - ihold(inode); } else { dout("ceph_queue_writeback %p failed\n", inode); + iput(inode); } } @@ -1353,12 +1354,13 @@ static void ceph_writeback_work(struct work_struct *work) */ void ceph_queue_invalidate(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq, &ceph_inode(inode)->i_pg_inv_work)) { dout("ceph_queue_invalidate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_invalidate %p failed\n", inode); + iput(inode); } } @@ -1434,13 +1436,14 @@ void ceph_queue_vmtruncate(struct inode *inode) { struct ceph_inode_info *ci = ceph_inode(inode); + ihold(inode); if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq, &ci->i_vmtruncate_work)) { dout("ceph_queue_vmtruncate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_vmtruncate %p failed, pending=%d\n", inode, ci->i_truncate_pending); + iput(inode); } } From 241fa6e42f5462a82f00ddf5169628a8c3976548 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 11 Oct 2011 11:54:26 -0300 Subject: [PATCH 113/692] [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls Currently it is also being checked for non BITMAP type menu controls, breaking the logitech LED control menu added by uvcdynctrl, as well as potentially breaking the powerline frequency menu. Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 10c2364f3e8a..254d32688843 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1016,7 +1016,8 @@ int uvc_query_v4l2_menu(struct uvc_video_chain *chain, menu_info = &mapping->menu_info[query_menu->index]; - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { s32 bitmap; if (!ctrl->cached) { @@ -1225,7 +1226,8 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, /* Valid menu indices are reported by the GET_RES request for * UVC controls that support it. */ - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { if (!ctrl->cached) { ret = uvc_ctrl_populate_cache(chain, ctrl); if (ret < 0) From a9380ba11fc384a52bcee0884ca6dd069deb6b1b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:20:41 -0300 Subject: [PATCH 114/692] [media] mxl111sf: fix return value of mxl111sf_idac_config mxl111sf_idac_config was incorrectly returning val instead of ret Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 91dc1fc2825b..ae8c2f839fcf 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -332,7 +332,7 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); - return val; + return ret; } /* From 2f4133de28edafcaac3ce6b57faf8f40ed2ff1b9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:29:17 -0300 Subject: [PATCH 115/692] [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index ae8c2f839fcf..09787be576ac 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -328,9 +328,11 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, /* set hysteresis value reg: 0x0B<5:0> */ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, (hysteresis_value & 0x3F)); + mxl_fail(ret); } ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); + mxl_fail(ret); return ret; } From cd834fa693160914029fee128f52e87a79d3e480 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:31:04 -0300 Subject: [PATCH 116/692] [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 09787be576ac..b741b3a7a325 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -296,8 +296,7 @@ int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) goto fail; ret = mxl111sf_write_reg(state, 0x00, 0x00); - if (mxl_fail(ret)) - goto fail; + mxl_fail(ret); fail: return ret; } From e836a1c078e230dd5a94bb086b186c2be3ec6a84 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:46:46 -0300 Subject: [PATCH 117/692] [media] mxl111sf: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix build warning: variable ‘ret’ set but not used in function ‘mxl111sf_i2c_readagain’ Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-i2c.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c index 2e8c288258a9..34434557ef65 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c @@ -398,7 +398,6 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, u8 i2c_r_data[24]; u8 i = 0; u8 fifo_status = 0; - int ret; int status = 0; mxl_i2c("read %d bytes", count); @@ -418,7 +417,7 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, i2c_w_data[4+(i*3)] = 0x00; } - ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); + mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); /* Check for I2C NACK status */ if (mxl111sf_i2c_check_status(state) == 1) { From eb513689c97e3e73bb9b4459d490a8e894b4a546 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 7 Nov 2011 10:47:42 -0500 Subject: [PATCH 118/692] ext4: ignore journalled data options on remount if fs has no journal This avoids a confusing failure in the init scripts when the /etc/fstab has data=writeback or data=journal but the file system does not have a journal. So check for this case explicitly, and warn the user that we are ignoring the (pointless, since they have no journal) data=* mount option. Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9953d80145ad..0435013dbd46 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1683,7 +1683,9 @@ static int parse_options(char *options, struct super_block *sb, data_opt = EXT4_MOUNT_WRITEBACK_DATA; datacheck: if (is_remount) { - if (test_opt(sb, DATA_FLAGS) != data_opt) { + if (!sbi->s_journal) + ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option"); + else if (test_opt(sb, DATA_FLAGS) != data_opt) { ext4_msg(sb, KERN_ERR, "Cannot change data mode on remount"); return 0; From 2397256d6218e7bf5147a3b01dcc6aec20fd3916 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 7 Nov 2011 10:50:09 -0500 Subject: [PATCH 119/692] ext4: Remove kernel_lock annotations The BKL is gone, these annotations are useless. Signed-off-by: Richard Weinberger Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0435013dbd46..3858767ec672 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3101,8 +3101,6 @@ static void ext4_destroy_lazyinit_thread(void) } static int ext4_fill_super(struct super_block *sb, void *data, int silent) - __releases(kernel_lock) - __acquires(kernel_lock) { char *orig_data = kstrdup(data, GFP_KERNEL); struct buffer_head *bh; From 3c1fcb2c24519febd7ca9cf292fa5bdf513b601f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 7 Nov 2011 11:01:13 -0500 Subject: [PATCH 120/692] ext4: add blk_finish_plug in error case of writepages. blk_finish_plug is needed in error case of writepages. Signed-off-by: Namjae Jeon Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cc5a6da030a1..18b262bb6a4a 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2270,6 +2270,7 @@ static int ext4_da_writepages(struct address_space *mapping, ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " "%ld pages, ino %lu; err %d", __func__, wbc->nr_to_write, inode->i_ino, ret); + blk_finish_plug(&plug); goto out_writepages; } From fdbd3ce9efb3a045266f2f6b2f1b6047882ff092 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 7 Nov 2011 07:53:23 -0800 Subject: [PATCH 121/692] PCI: pciehp: Retrieve link speed after link is trained During hot plug, board_added will call pciehp_power_on_slot(). But link speed is updated in pciehp_power_on_slot(). We should not update link speed there, because that is too early. So move the link speed update to pciehp_check_link_status() after making sure the link has been trained. -v2: fix compile warning that Kenji found. Signed-off-by: Yinghai Lu Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 96dc4734e4af..6692832c9c81 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -294,6 +294,8 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -484,7 +486,6 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; - u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -516,14 +517,6 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", - __func__); - return retval; - } - pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); - return retval; } From 694718d8ad2f0b11d7376f8aa32b1befff6e5966 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 17 Oct 2011 16:59:25 +0200 Subject: [PATCH 122/692] b43: fill ctl1 word on all newer PHYs, fix PHY errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 58ea0e5fabfd..b62d4a15c534 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -175,6 +175,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, } } +/* TODO: verify if needed for SSLPN or LCN */ static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate) { const struct b43_phy *phy = &dev->phy; @@ -256,6 +257,9 @@ int b43_generate_txhdr(struct b43_wldev *dev, unsigned int plcp_fragment_len; u32 mac_ctl = 0; u16 phy_ctl = 0; + bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP || + phy->type == B43_PHYTYPE_N || + phy->type == B43_PHYTYPE_HT); u8 extra_ft = 0; struct ieee80211_rate *txrate; struct ieee80211_tx_rate *rates; @@ -531,7 +535,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, extra_ft |= B43_TXH_EFT_RTSFB_CCK; if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS && - phy->type == B43_PHYTYPE_N) { + fill_phy_ctl1) { txhdr->phy_ctl1_rts = cpu_to_le16( b43_generate_tx_phy_ctl1(dev, rts_rate)); txhdr->phy_ctl1_rts_fb = cpu_to_le16( @@ -552,7 +556,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, break; } - if (phy->type == B43_PHYTYPE_N) { + if (fill_phy_ctl1) { txhdr->phy_ctl1 = cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate)); txhdr->phy_ctl1_fb = From 73d51f38c736ae286372e90056a7f31519f555ac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 17 Oct 2011 17:15:44 +0200 Subject: [PATCH 123/692] b43: HT-PHY: report signal to mac80211 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 7 +++++++ drivers/net/wireless/b43/xmit.h | 16 +++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index b62d4a15c534..5f77cbe0b6aa 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -740,7 +740,14 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) /* Link quality statistics */ switch (chanstat & B43_RX_CHAN_PHYTYPE) { + case B43_PHYTYPE_HT: + /* TODO: is max the right choice? */ + status.signal = max_t(__s8, + max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1), + rxhdr->phy_ht_power2); + break; case B43_PHYTYPE_N: + /* Broadcom has code for min and avg, but always uses max */ if (rxhdr->power0 == 16 || rxhdr->power0 == 32) status.signal = max(rxhdr->power1, rxhdr->power2); else diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 16c514d54afa..98d90747836a 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -249,6 +249,12 @@ struct b43_rxhdr_fw4 { } __packed; } __packed; union { + /* HT-PHY */ + struct { + PAD_BYTES(1); + __s8 phy_ht_power0; + } __packed; + /* RSSI for N-PHYs */ struct { __s8 power2; @@ -257,7 +263,15 @@ struct b43_rxhdr_fw4 { __le16 phy_status2; /* PHY RX Status 2 */ } __packed; - __le16 phy_status3; /* PHY RX Status 3 */ + union { + /* HT-PHY */ + struct { + __s8 phy_ht_power1; + __s8 phy_ht_power2; + } __packed; + + __le16 phy_status3; /* PHY RX Status 3 */ + } __packed; union { /* Tested with 598.314, 644.1001 and 666.2 */ struct { From ae8e46723f803057daff392bdc93332be2f0ec98 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 29 Oct 2011 11:30:15 +0200 Subject: [PATCH 124/692] brcm80211: smac: eliminate a null pointer dereference in dma.c Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall Acked-by: Arend van Spriel Signed-off-by: Julian Calaby Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/dma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c index b56a30297c26..6ebec8f42846 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c @@ -358,13 +358,14 @@ static uint nrxdactive(struct dma_info *di, uint h, uint t) static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags) { - uint dmactrlflags = di->dma.dmactrlflags; + uint dmactrlflags; if (di == NULL) { - DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name)); + DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n")); return 0; } + dmactrlflags = di->dma.dmactrlflags; dmactrlflags &= ~mask; dmactrlflags |= flags; From 3432f9233704a66e6067944339a311744243707d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 30 Oct 2011 15:41:59 +0200 Subject: [PATCH 125/692] mac80211: use min rate as basic rate for buggy APs Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 17258feaab9b..d3b408cda08d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1485,6 +1485,7 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, int i, j, err; bool have_higher_than_11mbit = false; u16 ap_ht_cap_flags; + int min_rate = INT_MAX, min_rate_index = -1; /* AssocResp and ReassocResp have identical structure */ @@ -1551,6 +1552,10 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } @@ -1568,11 +1573,25 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } } + /* + * some buggy APs don't advertise basic_rates. use the lowest + * supported rate instead. + */ + if (unlikely(!basic_rates) && min_rate_index >= 0) { + printk(KERN_DEBUG "%s: No basic rates in AssocResp. " + "Using min supported rate instead.\n", sdata->name); + basic_rates = BIT(min_rate_index); + } + sta->sta.supp_rates[wk->chan->band] = rates; sdata->vif.bss_conf.basic_rates = basic_rates; From 6c7394197af90f6a332180e33f5d025d3037d883 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 09:27:01 +0100 Subject: [PATCH 126/692] nl80211: fix HT capability attribute validation Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 48260c2d092a..b587857a9d7d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -132,8 +132,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED }, [NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG }, - [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY, - .len = NL80211_HT_CAPABILITY_LEN }, + [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN }, [NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 }, [NL80211_ATTR_IE] = { .type = NLA_BINARY, From 133a3ff2c934223a8143bfa52401bba962a97165 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 14:50:13 +0100 Subject: [PATCH 127/692] cfg80211: allow setting TXQ parameters only in AP mode In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b587857a9d7d..b3a476fe8272 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1252,6 +1252,12 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) goto bad_res; } + if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) { + result = -EINVAL; + goto bad_res; + } + nla_for_each_nested(nl_txq_params, info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS], rem_txq_params) { From 3b6ef6334febb05d3050a96546e635f038dbcb15 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:01:46 +0100 Subject: [PATCH 128/692] cfg80211: fix cmp_ies When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 0fb142410404..dc23b31594e0 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -259,17 +259,20 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2) { const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); - int r; + /* equal if both missing */ if (!ie1 && !ie2) return 0; - if (!ie1 || !ie2) + /* sort missing IE before (left of) present IE */ + if (!ie1) return -1; + if (!ie2) + return 1; - r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1])); - if (r == 0 && ie1[1] != ie2[1]) + /* sort by length first, then by contents */ + if (ie1[1] != ie2[1]) return ie2[1] - ie1[1]; - return r; + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); } static bool is_bss(struct cfg80211_bss *a, From db652e4b36e5f1e5f49a4a49caf3aa365fe851c4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 6 Nov 2011 22:58:31 +0100 Subject: [PATCH 129/692] net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params() If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl Reviewed-by: Srivatsa S. Bhat Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index dae8dbb24a03..8a3f9598ad33 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1469,7 +1469,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, s32 rssi, const u8 *ie_buf, size_t ie_len, u16 beacon_period, u16 cap_info_bitmap, u8 band) { - struct mwifiex_bssdescriptor *bss_desc = NULL; + struct mwifiex_bssdescriptor *bss_desc; int ret; unsigned long flags; u8 *beacon_ie; @@ -1484,6 +1484,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL); if (!beacon_ie) { + kfree(bss_desc); dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n"); return -ENOMEM; } From 24b9c373ab787ccacfa2c46736153708796f5cd6 Mon Sep 17 00:00:00 2001 From: "Janusz.Dziedzic@tieto.com" Date: Mon, 7 Nov 2011 09:47:47 +0200 Subject: [PATCH 130/692] mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/sta_info.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ce962d2c8782..8eaa746ec7a2 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1354,12 +1354,12 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta, * Use MoreData flag to indicate whether there are * more buffered frames for this STA */ - if (!more_data) - hdr->frame_control &= - cpu_to_le16(~IEEE80211_FCTL_MOREDATA); - else + if (more_data || !skb_queue_empty(&frames)) hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control &= + cpu_to_le16(~IEEE80211_FCTL_MOREDATA); if (ieee80211_is_data_qos(hdr->frame_control) || ieee80211_is_qos_nullfunc(hdr->frame_control)) From 4dff523a913197e3314c7b0d08734ab037709093 Mon Sep 17 00:00:00 2001 From: Arek Lichwa Date: Wed, 26 Oct 2011 11:23:22 +0200 Subject: [PATCH 131/692] Bluetooth: Revert: Fix L2CAP connection establishment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_conn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index c1c597e3e198..e0af7237cd92 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) goto encrypt; auth: - if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; if (!hci_conn_auth(conn, sec_level, auth_type)) From abf015f04614a3a7da43d35b55edc90189af4e6a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Nov 2011 19:04:36 +0000 Subject: [PATCH 132/692] Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage" This reverts commit 2b034922af2caa19df86f0c502e76cb6f6e910f9. Will Deacon reports: This is causing kexec to fail. The symptoms are that the .init.text section is not loaded as part of the new kernel image, so when we try to do the SMP/UP fixups we hit a whole sea of poison left there by the previous kernel. So my guess is that machine_kexec_prepare *is* too early for preparing the reboot_code_buffer and, unless anybody has a good reason not to, I'd like to revert the patch causing these problems. Reported-by: Will Deacon --- arch/arm/kernel/machine_kexec.c | 35 ++++++++++++++++----------------- 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index c1b4463dcc83..e59bbd496c39 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { - unsigned long page_list; - void *reboot_code_buffer; - page_list = image->head & PAGE_MASK; - - reboot_code_buffer = page_address(image->control_code_page); - - /* Prepare parameters for reboot_code_buffer*/ - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; - - /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); return 0; } @@ -100,14 +82,31 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { + unsigned long page_list; unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + + page_list = image->head & PAGE_MASK; + /* we need both effective and real address here */ reboot_code_buffer_phys = page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); + /* Prepare parameters for reboot_code_buffer*/ + kexec_start_address = image->start; + kexec_indirection_page = page_list; + kexec_mach_type = machine_arch_type; + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + + /* copy our kernel relocation code to the control code page */ + memcpy(reboot_code_buffer, + relocate_new_kernel, relocate_new_kernel_size); + + + flush_icache_range((unsigned long) reboot_code_buffer, + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) From f3f668b0ef4399b67e60e4c10a30099d630a6206 Mon Sep 17 00:00:00 2001 From: Andrzej Kaczmarek Date: Mon, 7 Nov 2011 17:19:04 -0200 Subject: [PATCH 133/692] Bluetooth: Use miliseconds for L2CAP channel timeouts Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek Signed-off-by: Gustavo F. Padovan --- include/net/bluetooth/l2cap.h | 7 +++++-- net/bluetooth/l2cap_core.c | 16 ++++++++-------- 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index ab90ae0970a6..6cc18f371675 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -39,8 +39,11 @@ #define L2CAP_DEFAULT_ACK_TO 200 #define L2CAP_LE_DEFAULT_MTU 23 -#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ -#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ +#define L2CAP_DISC_TIMEOUT (100) +#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ +#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ /* L2CAP socket address */ struct sockaddr_l2 { diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 8cd12917733b..5ea94a1eecf2 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -251,7 +251,7 @@ static void l2cap_chan_timeout(unsigned long arg) if (sock_owned_by_user(sk)) { /* sk is owned by user. Try again later */ - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); chan_put(chan); return; @@ -2488,7 +2488,7 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); break; } @@ -2661,7 +2661,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr default: sk->sk_err = ECONNRESET; - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT); l2cap_send_disconn_req(conn, chan, ECONNRESET); goto done; } @@ -2718,7 +2718,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -2752,7 +2752,7 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan,BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -3998,7 +3998,7 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt) if (encrypt == 0x00) { if (chan->sec_level == BT_SECURITY_MEDIUM) { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_ENC_TIMEOUT); } else if (chan->sec_level == BT_SECURITY_HIGH) l2cap_chan_close(chan, ECONNREFUSED); } else { @@ -4066,7 +4066,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) L2CAP_CONN_REQ, sizeof(req), &req); } else { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); } } else if (chan->state == BT_CONNECT2) { struct l2cap_conn_rsp rsp; @@ -4086,7 +4086,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) } } else { l2cap_state_change(chan, BT_DISCONN); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); res = L2CAP_CR_SEC_BLOCK; stat = L2CAP_CS_NO_INFO; } From 45ea6095c8f0d6caad5658306416a5d254f1205e Mon Sep 17 00:00:00 2001 From: "slyich@gmail.com" Date: Mon, 7 Nov 2011 16:08:01 -0500 Subject: [PATCH 134/692] btrfs: fix double-free 'tree_root' in 'btrfs_mount()' On error path 'tree_root' is treed in 'free_fs_info()'. No need to free it explicitely. Noticed by SLUB in debug mode: Complete reproducer under usermode linux (discovered on real machine): bdev=/dev/ubda btr_root=/btr /mkfs.btrfs $bdev mount $bdev $btr_root mkdir $btr_root/subvols/ cd $btr_root/subvols/ /btrfs su cr foo /btrfs su cr bar mount $bdev -osubvol=subvols/foo $btr_root/subvols/bar umount $btr_root/subvols/bar which gives device fsid 4d55aa28-45b1-474b-b4ec-da912322195e devid 1 transid 7 /dev/ubda ============================================================================= BUG kmalloc-2048: Object already free ----------------------------------------------------------------------------- INFO: Allocated in btrfs_mount+0x389/0x7f0 age=0 cpu=0 pid=277 INFO: Freed in btrfs_mount+0x51c/0x7f0 age=0 cpu=0 pid=277 INFO: Slab 0x0000000062886200 objects=15 used=9 fp=0x0000000070b4d2d0 flags=0x4081 INFO: Object 0x0000000070b4d2d0 @offset=21200 fp=0x0000000070b4a968 ... Call Trace: 70b31948: [<6008c522>] print_trailer+0xe2/0x130 70b31978: [<6008c5aa>] object_err+0x3a/0x50 70b319a8: [<6008e242>] free_debug_processing+0x142/0x2a0 70b319e0: [<600ebf6f>] btrfs_mount+0x55f/0x7f0 70b319f8: [<6008e5c1>] __slab_free+0x221/0x2d0 Signed-off-by: Sergei Trofimovich Cc: Arne Jansen Cc: Chris Mason Cc: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/super.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 57080dffdfc6..dcd5aef6b614 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -933,8 +933,12 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, * then open_ctree will properly initialize everything later. */ fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS); + if (!fs_info) { + error = -ENOMEM; + goto error_close_devices; + } tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); - if (!fs_info || !tree_root) { + if (!tree_root) { error = -ENOMEM; goto error_close_devices; } @@ -964,7 +968,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, btrfs_close_devices(fs_devices); free_fs_info(fs_info); - kfree(tree_root); } else { char b[BDEVNAME_SIZE]; @@ -992,7 +995,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, error_close_devices: btrfs_close_devices(fs_devices); free_fs_info(fs_info); - kfree(tree_root); return ERR_PTR(error); } From a6f498a891c730327645a7afa10c5ae977de6fd8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 7 Nov 2011 15:50:32 -0500 Subject: [PATCH 135/692] NFS: Fix a regression in the referral code Fix a regression that was introduced by commit 0c2e53f11a6dae9e3af5f50f5ad0382e7c3e0cfa (NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()). In the case where the lookup gets an NFS4ERR_MOVED, we want to return the result of nfs4_get_referral(). Instead, that value is getting clobbered by the call to nfs4_handle_exception()... Reported-by: Tigran Mkrtchyan Tested-by: Tigran Mkrtchyan Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 069cb8094d43..be2bbac13817 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2464,8 +2464,7 @@ static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qst case -NFS4ERR_BADNAME: return -ENOENT; case -NFS4ERR_MOVED: - err = nfs4_get_referral(dir, name, fattr, fhandle); - break; + return nfs4_get_referral(dir, name, fattr, fhandle); case -NFS4ERR_WRONGSEC: nfs_fixup_secinfo_attributes(fattr, fhandle); } From a6f05b97d1ba87326bd96f3da9fef994830d6994 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 6 Nov 2011 21:54:12 +0100 Subject: [PATCH 136/692] PM / QoS: Set cpu_dma_pm_qos->name Since commit 4a31a334, the name of this misc device is not initialized, which leads to a funny device named /dev/(null) being created and /proc/misc containing an entry with just a number but no name. The latter leads to complaints by cryptsetup, which caused me to investigate this matter. Signed-off-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki --- kernel/power/qos.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 56db75147186..995e3bd3417b 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -70,6 +70,7 @@ static struct pm_qos_constraints cpu_dma_constraints = { }; static struct pm_qos_object cpu_dma_pm_qos = { .constraints = &cpu_dma_constraints, + .name = "cpu_dma_latency", }; static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); From 5f11161675be1351cadb96c83850e20bf5bcdc48 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 6 Nov 2011 22:00:20 +0100 Subject: [PATCH 137/692] Documentation: Fix typo in freezer-subsystem.txt Fix a typo in Documentation/cgroups/freezer-subsystem.txt. Signed-off-by: Rafael J. Wysocki Reviewed-by: Srivatsa S. Bhat Acked-by: Randy Dunlap --- Documentation/cgroups/freezer-subsystem.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c21d77742a07..7e62de1e59ff 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells: From a second, unrelated bash shell: $ kill -SIGSTOP 16690 - $ kill -SIGCONT 16990 + $ kill -SIGCONT 16690 - + This happens because bash can observe both signals and choose how it responds to them. From 1a51cfdc4516a6e1f2c1f8a579630a027c30331a Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Mon, 7 Nov 2011 23:54:53 +0100 Subject: [PATCH 138/692] PM / devfreq: fix private_data The "private_date" field in struct devfreq_dev_status almost certainly wants to be "private_data"; since there are no in-tree users of this functionality, now seems like an easy time to make the fix. Signed-off-by: Jonathan Corbet Signed-off-by: Rafael J. Wysocki --- include/linux/devfreq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index afb94583960c..98ce8124b1cc 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -41,7 +41,7 @@ struct devfreq_dev_status { unsigned long total_time; unsigned long busy_time; unsigned long current_frequency; - void *private_date; + void *private_data; }; /** From 4e549d6d4a32d1a610ad081841d575f64087744a Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 6 Nov 2011 12:57:31 +0100 Subject: [PATCH 139/692] MTD: MAPS: bcm963xx-flash.c: explicitly include module.h module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski Signed-off-by: Paul Gortmaker --- drivers/mtd/maps/bcm963xx-flash.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 608967fe74c6..736ca10ca9f1 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include From 8f7346bdea64f2e3d02b0bcaf456e391c4cba134 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:16:51 +0800 Subject: [PATCH 140/692] hwspinlock/u8500: include linux/module.h Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/hwspinlock/u8500_hsem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..0156af510032 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -21,6 +21,7 @@ * General Public License for more details. */ +#include #include #include #include From 3b8ce3aed986090d9249629f97c53b4dfb8c9783 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 7 Nov 2011 11:17:04 -0500 Subject: [PATCH 141/692] mfd: fix build failures in recently added ab5500 code These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/mfd/ab5500-core.c | 1 + drivers/mfd/ab5500-debugfs.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index 4175544b491b..ec10629a0b0b 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -13,6 +13,7 @@ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. */ +#include #include #include #include diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 6be1fe6b5f9a..43c0ebb81956 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,6 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ +#include #include #include #include From 406478dc911e16677fbd9c84d1d50cdffbc031ab Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:04 -0800 Subject: [PATCH 142/692] drm/i915: Turn on a required 3D clock gating bit on Sandybridge. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5a09416e611f..b807275ea739 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3444,6 +3444,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL2 0x9404 +# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) + #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9fa342e89454..2b2a7645cd0c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8148,6 +8148,15 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: From 9ca1d10d748e56964de95e3ed80211b192f56cf4 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:05 -0800 Subject: [PATCH 143/692] drm/i915: Turn on another required clock gating bit on gen6. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b807275ea739..a34e86630f26 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3446,6 +3446,7 @@ #define GEN6_UCGCTL2 0x9404 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) +# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2b2a7645cd0c..591eb0ed3110 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8154,8 +8154,13 @@ static void gen6_init_clock_gating(struct drm_device *dev) * some amount of runtime in the Mesa "fire" demo, and Unigine * Sanctuary and Tropics, and apparently anything else with * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. */ - I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* * According to the spec the following bits should be From ad61d64e263228a418fe25809a23d5107cf778a0 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2011 13:36:56 +0000 Subject: [PATCH 144/692] powerpc/kvm: Fix build with older toolchains Fix KVM build for older toolchains (found with .powerpc64-unknown-linux-gnu-gcc (crosstool-NG-1.8.1) 4.3.2): AS arch/powerpc/kvm/book3s_hv_rmhandlers.o arch/powerpc/kvm/book3s_hv_rmhandlers.S: Assembler messages: arch/powerpc/kvm/book3s_hv_rmhandlers.S:1388: Error: Unrecognized opcode: `popcntw' make[1]: *** [arch/powerpc/kvm/book3s_hv_rmhandlers.o] Error 1 make: *** [_module_arch/powerpc/kvm] Error 2 Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index f422231d9235..44d8829334ab 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1263,7 +1263,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) addi r6,r5,VCORE_NAPPING_THREADS 31: lwarx r4,0,r6 or r4,r4,r0 - popcntw r7,r4 + PPC_POPCNTW(r7,r4) cmpw r7,r8 bge 2f stwcx. r4,0,r6 From 88cf11b4cca8ee0044d0a10ce100d8c0012b2c5e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 7 Nov 2011 14:49:13 +0000 Subject: [PATCH 145/692] powerpc: Add KVM as module to defconfigs Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 4 ++++ arch/powerpc/configs/pseries_defconfig | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 84a685a505fe..535711fcb13c 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -485,3 +485,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 96a58b709705..a72f2415a647 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -362,3 +362,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m From c40dd2f76644016ca7677545fc846ec2470d70a1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 2 Nov 2011 14:56:12 +0000 Subject: [PATCH 146/692] powerpc: Add System RAM to /proc/iomem We've resisted adding System RAM to /proc/iomem because it is the wrong place for it. Unfortunately we continue to find tools that rely on this behaviour so give up and add it in. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mem.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 16da595ff402..2dd6bdd31fe1 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -555,3 +556,32 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, book3e_hugetlb_preload(vma->vm_mm, address, *ptep); #endif } + +/* + * System memory should not be in /proc/iomem but various tools expect it + * (eg kdump). + */ +static int add_system_ram_resources(void) +{ + struct memblock_region *reg; + + for_each_memblock(memory, reg) { + struct resource *res; + unsigned long base = reg->base; + unsigned long size = reg->size; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + WARN_ON(!res); + + if (res) { + res->name = "System RAM"; + res->start = base; + res->end = base + size - 1; + res->flags = IORESOURCE_MEM; + WARN_ON(request_resource(&iomem_resource, res) < 0); + } + } + + return 0; +} +subsys_initcall(add_system_ram_resources); From 1c8ee73395af762726e9eb628636d3b763618c60 Mon Sep 17 00:00:00 2001 From: Dipankar Sarma Date: Fri, 28 Oct 2011 04:25:32 +0000 Subject: [PATCH 147/692] powerpc/numa: NUMA topology support for PowerNV This patch adds support for numa topology on powernv platforms running OPAL formware. It checks for the type of platform at run time and sets the affinity form correctly so that NUMA topology can be discovered correctly. Signed-off-by: Dipankar Sarma Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index c7dd4dec4df8..b22a83a91cb8 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -315,7 +315,10 @@ static int __init find_min_common_depth(void) struct device_node *root; const char *vec5; - root = of_find_node_by_path("/rtas"); + if (firmware_has_feature(FW_FEATURE_OPAL)) + root = of_find_node_by_path("/ibm,opal"); + else + root = of_find_node_by_path("/rtas"); if (!root) root = of_find_node_by_path("/"); @@ -344,12 +347,19 @@ static int __init find_min_common_depth(void) #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 - chosen = of_find_node_by_path("/chosen"); - if (chosen) { - vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); - if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { - dbg("Using form 1 affinity\n"); - form1_affinity = 1; + + if (firmware_has_feature(FW_FEATURE_OPAL)) + form1_affinity = 1; + else { + chosen = of_find_node_by_path("/chosen"); + if (chosen) { + vec5 = of_get_property(chosen, + "ibm,architecture-vec-5", NULL); + if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & + VEC5_AFFINITY)) { + dbg("Using form 1 affinity\n"); + form1_affinity = 1; + } } } From a3a9f3b47d12b5f6dfc9c7ed9d7b193d77812195 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:27 +0000 Subject: [PATCH 148/692] powerpc/irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Arnd Bergmann Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/floppy.h | 4 ++-- arch/powerpc/include/asm/xics.h | 4 ++-- arch/powerpc/kernel/smp.c | 2 +- arch/powerpc/platforms/cell/beat.c | 2 +- arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- arch/powerpc/platforms/cell/iommu.c | 3 +-- arch/powerpc/platforms/cell/pmu.c | 2 +- arch/powerpc/platforms/cell/spu_base.c | 9 +++------ arch/powerpc/platforms/powermac/pic.c | 1 - arch/powerpc/platforms/powermac/smp.c | 4 ++-- arch/powerpc/platforms/ps3/device-init.c | 2 +- arch/powerpc/sysdev/mpic.c | 2 -- arch/powerpc/sysdev/ppc4xx_soc.c | 2 +- arch/powerpc/sysdev/xics/xics-common.c | 5 ++--- 14 files changed, 18 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h index 24bd34c57e9d..936a904ae78c 100644 --- a/arch/powerpc/include/asm/floppy.h +++ b/arch/powerpc/include/asm/floppy.h @@ -108,10 +108,10 @@ static int fd_request_irq(void) { if (can_use_virtual_dma) return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); else return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index bd6c401c0ee5..c48de98ba94e 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -15,8 +15,8 @@ #define DEFAULT_PRIORITY 5 /* - * Mark IPIs as higher priority so we can take them inside interrupts that - * arent marked IRQF_DISABLED + * Mark IPIs as higher priority so we can take them inside interrupts + * FIXME: still true now? */ #define IPI_PRIORITY 4 diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 25ddbfc7dd36..6df70907d60a 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -187,7 +187,7 @@ int smp_request_message_ipi(int virq, int msg) return 1; } #endif - err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU, + err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU, smp_ipi_name[msg], 0); WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n", virq, smp_ipi_name[msg], err); diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c index 232fc384e855..852592b2b712 100644 --- a/arch/powerpc/platforms/cell/beat.c +++ b/arch/powerpc/platforms/cell/beat.c @@ -230,7 +230,7 @@ static int __init beat_register_event(void) } ev->virq = virq; - rc = request_irq(virq, ev->handler, IRQF_DISABLED, + rc = request_irq(virq, ev->handler, 0, ev->typecode, NULL); if (rc != 0) { printk(KERN_ERR "Beat: failed to request virtual IRQ" diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index ae790ac4a589..14be2bd358b8 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -514,7 +514,7 @@ static __init int celleb_setup_pciex(struct device_node *node, virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); if (request_irq(virq, pciex_handle_internal_irq, - IRQF_DISABLED, "pciex", (void *)phb)) { + 0, "pciex", (void *)phb)) { pr_err("PCIEXC:Failed to request irq\n"); goto error; } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index fc46fcac3921..592c3d51b817 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -412,8 +412,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); BUG_ON(virq == NO_IRQ); - ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED, - iommu->name, iommu); + ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); BUG_ON(ret); /* set the IOC segment table origin register (and turn on the iommu) */ diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 1acf36010423..59c1a1694104 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -392,7 +392,7 @@ static int __init cbe_init_pm_irq(void) } rc = request_irq(irq, cbe_pm_irq, - IRQF_DISABLED, "cbe-pmu-0", NULL); + 0, "cbe-pmu-0", NULL); if (rc) { printk("ERROR: Request for irq on node %d failed\n", node); diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3675da73623f..e94d3ecdd8bb 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -442,8 +442,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(spu->irqs[0], spu_irq_class_0, - IRQF_DISABLED, - spu->irq_c0, spu); + 0, spu->irq_c0, spu); if (ret) goto bail0; } @@ -451,8 +450,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(spu->irqs[1], spu_irq_class_1, - IRQF_DISABLED, - spu->irq_c1, spu); + 0, spu->irq_c1, spu); if (ret) goto bail1; } @@ -460,8 +458,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(spu->irqs[2], spu_irq_class_2, - IRQF_DISABLED, - spu->irq_c2, spu); + 0, spu->irq_c2, spu); if (ret) goto bail2; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index cb40e921a565..901bfbddc3dd 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -272,7 +272,6 @@ static struct irqaction xmon_action = { static struct irqaction gatwick_cascade_action = { .handler = gatwick_action, - .flags = IRQF_DISABLED, .name = "cascade", }; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 9a521dc8e485..9b6a820bdd7d 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void) if (psurge_secondary_virq) rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL); + IRQF_PERCPU, "IPI", NULL); if (rc) pr_err("Failed to setup secondary cpu IPI\n"); @@ -408,7 +408,7 @@ static int __init smp_psurge_kick_cpu(int nr) static struct irqaction psurge_irqaction = { .handler = psurge_ipi_intr, - .flags = IRQF_DISABLED|IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "primary IPI", }; diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 6c4b5837fc8a..3f175e8aedb4 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -825,7 +825,7 @@ static int ps3_probe_thread(void *data) spin_lock_init(&dev.lock); - res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED, + res = request_irq(irq, ps3_notification_interrupt, 0, "ps3_notification", &dev); if (res) { pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__, diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0842c6f8a3e6..8c7e8528e7c4 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -800,8 +800,6 @@ static void mpic_end_ipi(struct irq_data *d) * IPIs are marked IRQ_PER_CPU. This has the side effect of * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from * applying to them. We EOI them late to avoid re-entering. - * We mark IPI's with IRQF_DISABLED as they must run with - * irqs disabled. */ mpic_eoi(mpic); } diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c index d3d6ce3c33b4..0debcc31ad70 100644 --- a/arch/powerpc/sysdev/ppc4xx_soc.c +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -115,7 +115,7 @@ static int __init ppc4xx_l2c_probe(void) } /* Install error handler */ - if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { + if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) { printk(KERN_ERR "Cannot install L2C error handler" ", cache is not enabled\n"); of_node_put(np); diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 3d93a8ded0f8..63762c672a03 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -134,11 +134,10 @@ static void xics_request_ipi(void) BUG_ON(ipi == NO_IRQ); /* - * IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled, and PERCPU. The handler was set in map. + * IPIs are marked IRQF_PERCPU. The handler was set in map. */ BUG_ON(request_irq(ipi, icp_ops->ipi_action, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL)); + IRQF_PERCPU, "IPI", NULL)); } int __init xics_smp_probe(void) From 6ea741a13690da9dbbac76175db8e313b0c4b817 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:53 +0000 Subject: [PATCH 149/692] powerpc/ps3: irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- drivers/ps3/ps3-vuart.c | 2 +- drivers/ps3/ps3stor_lib.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c index d9fb729535a1..fb7300837fee 100644 --- a/drivers/ps3/ps3-vuart.c +++ b/drivers/ps3/ps3-vuart.c @@ -952,7 +952,7 @@ static int ps3_vuart_bus_interrupt_get(void) } result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler, - IRQF_DISABLED, "vuart", &vuart_bus_priv); + 0, "vuart", &vuart_bus_priv); if (result) { pr_debug("%s:%d: request_irq failed (%d)\n", diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c index cc328dec946b..8c3f5adf1bc6 100644 --- a/drivers/ps3/ps3stor_lib.c +++ b/drivers/ps3/ps3stor_lib.c @@ -167,7 +167,7 @@ int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler) goto fail_close_device; } - error = request_irq(dev->irq, handler, IRQF_DISABLED, + error = request_irq(dev->irq, handler, 0, dev->sbd.core.driver->name, dev); if (error) { dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n", From 5233e26ebb90242e3691c185ddda02dc83649e7d Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:39:15 +0000 Subject: [PATCH 150/692] powerpc/ps3: Fix PS3 repository build warnings Fix uninitialized variable warnings in build of repository.c Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/repository.c | 32 ++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 5e304c292f68..ca40f6afd35d 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -184,7 +184,7 @@ int ps3_repository_read_bus_type(unsigned int bus_index, enum ps3_bus_type *bus_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -199,7 +199,7 @@ int ps3_repository_read_bus_num_dev(unsigned int bus_index, unsigned int *num_dev) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -239,7 +239,7 @@ int ps3_repository_read_dev_type(unsigned int bus_index, unsigned int dev_index, enum ps3_dev_type *dev_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -256,8 +256,8 @@ int ps3_repository_read_dev_intr(unsigned int bus_index, enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -275,7 +275,7 @@ int ps3_repository_read_dev_reg_type(unsigned int bus_index, enum ps3_reg_type *reg_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -615,7 +615,7 @@ int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, unsigned int dev_index, unsigned int *num_regions) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -631,7 +631,7 @@ int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, unsigned int *region_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -786,7 +786,7 @@ int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total) int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -805,7 +805,7 @@ int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -827,8 +827,8 @@ int ps3_repository_read_spu_resource_id(unsigned int res_index, enum ps3_spu_resource_type *resource_type, unsigned int *resource_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -854,7 +854,7 @@ static int ps3_repository_read_boot_dat_address(u64 *address) int ps3_repository_read_boot_dat_size(unsigned int *size) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -869,7 +869,7 @@ int ps3_repository_read_boot_dat_size(unsigned int *size) int ps3_repository_read_vuart_av_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -884,7 +884,7 @@ int ps3_repository_read_vuart_av_port(unsigned int *port) int ps3_repository_read_vuart_sysmgr_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -919,7 +919,7 @@ int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size) int ps3_repository_read_num_be(unsigned int *num_be) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("ben", 0), From 9fce85f7ff94f1a877c15ad3d6ffbaed4b5cd1a6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:42:13 +0000 Subject: [PATCH 151/692] powerpc/ps3: Fix lv1_gpu_attribute hcall The lv1_gpu_attribute hcall takes three, not five input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by: Geoff Levand CC: Takashi Iwai Acked-by: Takashi Iwai Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/lv1call.h | 2 +- sound/ppc/snd_ps3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h index 9cd5fc828a37..f77c708c67a0 100644 --- a/arch/powerpc/include/asm/lv1call.h +++ b/arch/powerpc/include/asm/lv1call.h @@ -316,7 +316,7 @@ LV1_CALL(gpu_context_free, 1, 0, 218 ) LV1_CALL(gpu_context_iomap, 5, 0, 221 ) LV1_CALL(gpu_context_attribute, 6, 0, 225 ) LV1_CALL(gpu_context_intr, 1, 1, 227 ) -LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(gpu_attribute, 3, 0, 228 ) LV1_CALL(get_rtc, 0, 2, 232 ) LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index a3ce1b22620d..1aa52eff526a 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -876,7 +876,7 @@ static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) (0x0fUL << 12) | (PS3_AUDIO_IOID); - ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0); + ret = lv1_gpu_attribute(0x100, 0x007, val); if (ret) pr_info("%s: gpu_attribute failed %d\n", __func__, ret); From 5ccf55dd8177295813b68780f0a3c85e47306be1 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Tue, 13 Sep 2011 04:15:31 +0000 Subject: [PATCH 152/692] powerpc/kvm: Fix build failure with HV KVM and CBE When running with HV KVM and CBE config options enabled, I get build failures like the following: arch/powerpc/kernel/head_64.o: In function `cbe_system_error_hv': (.text+0x1228): undefined reference to `do_kvm_0x1202' arch/powerpc/kernel/head_64.o: In function `cbe_maintenance_hv': (.text+0x1628): undefined reference to `do_kvm_0x1602' arch/powerpc/kernel/head_64.o: In function `cbe_thermal_hv': (.text+0x1828): undefined reference to `do_kvm_0x1802' This is because we jump to a KVM handler when HV is enabled, but we only generate the handler with PR KVM mode. Signed-off-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index a54d92fec612..cf9c69b9189c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -267,7 +267,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint) @@ -275,7 +275,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist) @@ -283,7 +283,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802) #endif /* CONFIG_CBE_RAS */ . = 0x3000 From 9a3f530f39f4490eaa18b02719fb74ce5f4d2d86 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 8 Nov 2011 16:22:01 +1100 Subject: [PATCH 153/692] md/raid5: abort any pending parity operations when array fails. When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 in 2.6.29. Reported-by: Manish Katiyar Tested-by: Manish Katiyar Acked-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 472aedfb07cf..318bdae9b56c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3159,10 +3159,14 @@ static void handle_stripe(struct stripe_head *sh) /* check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. */ - if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); - if (s.failed > conf->max_degraded && s.syncing) - handle_failed_sync(conf, sh, &s); + if (s.failed > conf->max_degraded) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); + if (s.syncing) + handle_failed_sync(conf, sh, &s); + } /* * might be able to return some write requests if the parity blocks From 257a4b42af7586fab4eaec7f04e6896b86551843 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Nov 2011 16:22:06 +1100 Subject: [PATCH 154/692] md/raid5: STRIPE_ACTIVE has lock semantics, add barriers All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 318bdae9b56c..297e26092178 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3110,7 +3110,7 @@ static void handle_stripe(struct stripe_head *sh) struct r5dev *pdev, *qdev; clear_bit(STRIPE_HANDLE, &sh->state); - if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) { + if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) { /* already being handled, ensure it gets handled * again when current action finishes */ set_bit(STRIPE_HANDLE, &sh->state); @@ -3375,7 +3375,7 @@ static void handle_stripe(struct stripe_head *sh) return_io(s.return_bi); - clear_bit(STRIPE_ACTIVE, &sh->state); + clear_bit_unlock(STRIPE_ACTIVE, &sh->state); } static void raid5_activate_delayed(struct r5conf *conf) From 5a9a51799b23142d2fc3ef94894d3b5ac00d05a5 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Mon, 7 Nov 2011 20:33:25 +0400 Subject: [PATCH 155/692] ALSA: intel8x0: Improve comments for VM optimization The recently merged 228cf79376f1 looks a bit hackish while it is not. The change was quite simple. In a virtualized environment the patch unhacks old kludge introduced for old broken AC97 hardware. This patch adds proper comment to "unkludge" code. Signed-off-by: Denis V. Lunev Signed-off-by: Konstantin Ozerkov Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 29e312597f20..c3b9bd0e188e 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1077,6 +1077,13 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs } if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV)) continue; + + /* IO read operation is very expensive inside virtual machine + * as it is emulated. The probability that subsequent PICB read + * will return different result is high enough to loop till + * timeout here. + * Same CIV is strict enough condition to be sure that PICB + * is valid inside VM on emulated card. */ if (chip->inside_vm) break; if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) From dccc1810f41b42773a2e359907f05a7fd10910bd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Nov 2011 07:52:19 +0100 Subject: [PATCH 156/692] ALSA: hda - Mute unused capture sources for Realtek codecs When a Realtek codec has a matrix-style capture-source selection, we need to scan all connections instead of only imux items. Otherwise some input might be kept unmuted. Although the corresponding input must be dead so there should be no input from it, it's still safer to mute the route completely. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a24e068a021b..308bb575bc06 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -284,7 +284,7 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux; unsigned int mux_idx; - int i, type; + int i, type, num_conns; hda_nid_t nid; mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx; @@ -307,16 +307,17 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx]; /* no selection? */ - if (snd_hda_get_conn_list(codec, nid, NULL) <= 1) + num_conns = snd_hda_get_conn_list(codec, nid, NULL); + if (num_conns <= 1) return 1; type = get_wcaps_type(get_wcaps(codec, nid)); if (type == AC_WID_AUD_MIX) { /* Matrix-mixer style (e.g. ALC882) */ - for (i = 0; i < imux->num_items; i++) { - unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE; - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, - imux->items[i].index, + int active = imux->items[idx].index; + for (i = 0; i < num_conns; i++) { + unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE; + snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i, HDA_AMP_MUTE, v); } } else { From 816af3bb5022c1468b3d826c645ddc2cac45bc97 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Nov 2011 14:45:48 +0800 Subject: [PATCH 157/692] hwspinlock: Don't return a value in __hwspin_unlock Fix below build warning: CC arch/arm/mach-omap2/hwspinlock.o In file included from arch/arm/mach-omap2/hwspinlock.c:22: include/linux/hwspinlock.h: In function '__hwspin_unlock': include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void Signed-off-by: Axel Lin Signed-off-by: Ohad Ben-Cohen --- include/linux/hwspinlock.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 08a2fee40659..aad6bd4b3efd 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags) static inline void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { - return 0; } static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) From fdcb23634c9b6649bb02c681033d4973491b0e35 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:14:16 +0800 Subject: [PATCH 158/692] hwspinlock/u8500: fix build error due to undefined label Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin Signed-off-by: Ohad Ben-Cohen --- drivers/hwspinlock/u8500_hsem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..a120f14814f9 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -108,10 +108,8 @@ static int __devinit u8500_hsem_probe(struct platform_device *pdev) return -ENODEV; io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - ret = -ENOMEM; - goto free_state; - } + if (!io_base) + return -ENOMEM; /* make sure protocol 1 is selected */ val = readl(io_base + HSEM_CTRL_REG); From 35b09c9bf619c4fc6040c52dcea6bd5bd6af7679 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: [PATCH 159/692] drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8096ca..3a8d44886010 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); From a08185a3eb658854b29c05bcbfac0f85038ffe9f Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: [PATCH 160/692] agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky --- drivers/char/agp/intel-gtt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d44886010..c92424ca1a55 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } From 14660ccd599dc7bd6ecef17408bd76dc853f9b77 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: [PATCH 161/692] drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36b6e8a..d18b07adcffa 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { From 2c2dd6ac738d8a22def46e073fb7383cac8fa180 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 12 Oct 2011 13:09:53 -0300 Subject: [PATCH 162/692] [media] media: vb2: add a check for uninitialized buffer __buffer_in_use() might be called for empty/uninitialized buffer in the following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes kernel ops in such case. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 979e544388cb..9bb92145ad5a 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -296,14 +296,14 @@ static bool __buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb) { unsigned int plane; for (plane = 0; plane < vb->num_planes; ++plane) { + void *mem_priv = vb->planes[plane].mem_priv; /* * If num_users() has not been provided, call_memop * will return 0, apparently nobody cares about this * case anyway. If num_users() returns more than 1, * we are not the only user of the plane's memory. */ - if (call_memop(q, plane, num_users, - vb->planes[plane].mem_priv) > 1) + if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1) return true; } return false; From 4907602f85d454c127d20ac943ead13e2919898d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 13 Oct 2011 07:07:24 -0300 Subject: [PATCH 163/692] [media] media: vb2: set buffer length correctly for all buffer types v4l2_planes[plane].length field was not initialized for userptr buffers. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 9bb92145ad5a..e7c52ff3c761 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -131,6 +131,7 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) continue; for (plane = 0; plane < vb->num_planes; ++plane) { + vb->v4l2_planes[plane].length = q->plane_sizes[plane]; vb->v4l2_planes[plane].m.mem_offset = off; dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", From bd50d999d4d4f311fda9b777d1e567433cc0f142 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 25 Oct 2011 03:07:59 -0300 Subject: [PATCH 164/692] [media] media: vb2: reset queued list on REQBUFS(0) call Queued list was not reset on REQBUFS(0) call. This caused to enqueue a freed buffer to the driver. Reported-by: Angela Wan Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index e7c52ff3c761..95a3f5e82aef 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -265,6 +265,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) q->num_buffers -= buffers; if (!q->num_buffers) q->memory = 0; + INIT_LIST_HEAD(&q->queued_list); } /** From 43defb118247b9c72d53328aa366bdb154d5ee98 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Thu, 6 Oct 2011 11:34:05 -0300 Subject: [PATCH 165/692] [media] v4l: s5p-mfc: fix reported capabilities MFC uses the multi-plane API, but it reported single-plane when querying capabilities. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-mfc/s5p_mfc_dec.c | 4 ++-- drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c index 725634d9736d..844a4d7797bc 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -220,8 +220,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT - | V4L2_CAP_STREAMING; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE | + V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index ecef127dbc66..1e8cdb77d4b8 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -785,8 +785,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE - | V4L2_CAP_VIDEO_OUTPUT + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } From 60659dd49509f255ad9748411cd4eb3c74a8d8a9 Mon Sep 17 00:00:00 2001 From: Jeongtae Park Date: Fri, 14 Oct 2011 00:03:23 -0300 Subject: [PATCH 166/692] [media] MAINTAINERS: add a maintainer for s5p-mfc driver Add a maintainer for s5p-mfc driver. Signed-off-by: Jeongtae Park Acked-by: Marek Szyprowski Acked-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5e587fcaf4dc..e839b95b2723 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1088,6 +1088,7 @@ F: drivers/media/video/s5p-fimc/ ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT M: Kyungmin Park M: Kamil Debski +M: Jeongtae Park L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained From b36b505965e374b284166c2e6b9c1d369d663ea9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Oct 2011 05:03:27 -0300 Subject: [PATCH 167/692] [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 53b190cf225e..9f56f18d509f 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -215,6 +215,9 @@ int v4l2_event_subscribe(struct v4l2_fh *fh, unsigned long flags; unsigned i; + if (sub->type == V4L2_EVENT_ALL) + return -EINVAL; + if (elems < 1) elems = 1; if (sub->type == V4L2_EVENT_CTRL) { From 78c87e863bb3350426fecd14912fd0a546c58ec0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:40:27 -0300 Subject: [PATCH 168/692] [media] v4l2-event: Remove pending events from fh event queue when unsubscribing The kev pointers inside the pending events queue (the available queue) of the fh point to data inside the sev, unsubscribing frees the sev, thus making these pointers point to freed memory! This patch fixes these dangling pointers in the available queue by removing all matching pending events on unsubscription. Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 9f56f18d509f..4d01f17497f6 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -285,6 +285,7 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, { struct v4l2_subscribed_event *sev; unsigned long flags; + int i; if (sub->type == V4L2_EVENT_ALL) { v4l2_event_unsubscribe_all(fh); @@ -295,6 +296,11 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, sev = v4l2_event_subscribed(fh, sub->type, sub->id); if (sev != NULL) { + /* Remove any pending events for this subscription */ + for (i = 0; i < sev->in_use; i++) { + list_del(&sev->events[sev_pos(sev, i)].list); + fh->navailable--; + } list_del(&sev->list); sev->fh = NULL; } From e3e72f39b68ec2563d8ef22f9704a66b7f71b638 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:52:47 -0300 Subject: [PATCH 169/692] [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe Setting sev->fh to NULL causes problems for the del op added in the next patch of this series, since this op needs a way to get to its own data structures, and typically this will be done by using container_of on an embedded v4l2_fh struct. The reason the original code is setting sev->fh to NULL is to signal to users of the event framework that the unsubscription has happened, but since their is no shared lock between the event framework and users of it, this is inherently racy, and it also turns out to be unnecessary as long as both the event framework and the user of the framework do their own locking properly and the user guarantees that it holds no references to the subcribed_event structure after its del operation has been called. This is best explained by looking at the only code currently checking for sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event function. Here is the relevant code from v4l2-ctrls: send_event(): if (sev->fh && (sev->fh != fh || (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) v4l2_event_queue_fh(sev->fh, &ev); Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race on the same sev, then the following could happens: 1) send_event checks sev->fh, finds it is not NULL 2) v4l2_event_unsubscribe sets sev->fh NULL 3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent to calling: v4l2_event_queue_fh(NULL, &ev) 5) oops, NULL pointer deref. Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and without the (now senseless since always true) sev->fh != NULL check in 1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev) 2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list 3) send_event calls v4l2_event_queue_fh(sev->fh, &ev) 4) v4l2_event_queue_fh blocks on the fh_lock spinlock 5) v4l2_event_unsubscribe unlocks the fh_lock spinlock 6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 8) v4l2_event_queue_fh takes the fh_lock 7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since sev->list has been removed from fh->subscribed already -> does nothing 9) v4l2_event_queue_fh releases the fh_lock 10) the caller of send_event releases the ctrl lock (mutex) 11) v4l2_ctrls del_event takes the ctrl lock 12) v4l2_ctrls del_event removes sev->node from the ev_subs list 13) v4l2_ctrls del_event releases the ctrl lock 14) v4l2_event_unsubscribe frees the sev, to which no references are being held anymore Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 4 ++-- drivers/media/video/v4l2-event.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 5552f8137571..c58c91bbcfbd 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -820,8 +820,8 @@ static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes) fill_event(&ev, ctrl, changes); list_for_each_entry(sev, &ctrl->ev_subs, node) - if (sev->fh && (sev->fh != fh || - (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) + if (sev->fh != fh || + (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)) v4l2_event_queue_fh(sev->fh, &ev); } diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 4d01f17497f6..3d93251f292e 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -302,7 +302,6 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, fh->navailable--; } list_del(&sev->list); - sev->fh = NULL; } spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); From 1249a3a82d08d73ece65ae79e0553cd0f3407a15 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 31 Oct 2011 11:16:44 -0300 Subject: [PATCH 170/692] [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls Otherwise the fh changing the master control won't get the inactive state change event for the slave controls. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index c58c91bbcfbd..2ece7093b513 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -946,6 +946,7 @@ static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, if (ctrl->cluster[0]->has_volatiles) ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; } + fh = NULL; } if (changed || update_inactive) { /* If a control was changed that was not one of the controls From 617d1017545c27a56229483cc1d689eff6c38561 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Sat, 29 Oct 2011 15:45:56 +0200 Subject: [PATCH 171/692] MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check Cause is a misplaced bracket. The code strlen(buf+1) will be two bytes less than strlen(buf)+1 The +1 is in this code to reserve space for an additional space character. [ralf@linux-mips.org: Thomas' original patch fixed the issue only for Yosemite but the same bug exists also in Emma.] Signed-off-by: Thomas Jarosch Patchwork: https://patchwork.linux-mips.org/patch/2861/ Signed-off-by: Ralf Baechle --- arch/mips/emma/common/prom.c | 2 +- arch/mips/pmc-sierra/yosemite/prom.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c index 708f08761406..cae42259d6da 100644 --- a/arch/mips/emma/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -50,7 +50,7 @@ void __init prom_init(void) /* arg[0] is "g", the rest is boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; strcat(arcs_cmdline, arg[i]); diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index cf4c868715ac..dcc926e06fce 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -102,7 +102,7 @@ void __init prom_init(void) /* Get the boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >= + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; From 798580815126c899616146f286d5cc259abb5e16 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Nov 2011 10:45:57 +0000 Subject: [PATCH 172/692] MIPS: NXP: Remove unused source files. The NXP code was moved for 2.6.36 but two files survived unused in the old location. Signed-off-by: Ralf Baechle --- arch/mips/nxp/pnx8550/common/pci.c | 134 ------------------------- arch/mips/nxp/pnx8550/common/setup.c | 143 --------------------------- 2 files changed, 277 deletions(-) delete mode 100644 arch/mips/nxp/pnx8550/common/pci.c delete mode 100644 arch/mips/nxp/pnx8550/common/setup.c diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c deleted file mode 100644 index 98e86ddb86cc..000000000000 --- a/arch/mips/nxp/pnx8550/common/pci.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - -static struct resource pci_io_resource = { - .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ - .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PNX8550_PCIMEM, - .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops pnx8550_pci_ops; - -static struct pci_controller pnx8550_controller = { - .pci_ops = &pnx8550_pci_ops, - .io_map_base = PNX8550_PORT_BASE, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -static inline unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -static int __init pnx8550_pci_setup(void) -{ - int pci_mem_code; - int mem_size = get_system_mem_size() >> 20; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* Calc the PCI mem size code */ - if (mem_size >= 128) - pci_mem_code = SIZE_128M; - else if (mem_size >= 64) - pci_mem_code = SIZE_64M; - else if (mem_size >= 32) - pci_mem_code = SIZE_32M; - else - pci_mem_code = SIZE_16M; - - /* Set PCI_XIO registers */ - outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); - outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); - outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); - outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); - - /* Send memory transaction via PCI_BASE2 */ - outl(0x00000001, PCI_BASE | PCI_IO); - - /* Unlock the setup register */ - outl(0xca, PCI_BASE | PCI_UNLOCKREG); - - /* - * BAR0 of PNX8550 (pci base 10) must be zero in order for ide - * to work, and in order for bus_to_baddr to work without any - * hacks. - */ - outl(0x00000000, PCI_BASE | PCI_BASE10); - - /* - *These two bars are set by default or the boot code. - * However, it's safer to set them here so we're not boot - * code dependent. - */ - outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ - outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ - - outl(PCI_EN_TA | - PCI_EN_PCI2MMI | - PCI_EN_XIO | - PCI_SETUP_BASE18_SIZE(SIZE_32M) | - PCI_SETUP_BASE18_EN | - PCI_SETUP_BASE14_EN | - PCI_SETUP_BASE10_PREF | - PCI_SETUP_BASE10_SIZE(pci_mem_code) | - PCI_SETUP_CFGMANAGE_EN | - PCI_SETUP_PCIARB_EN, - PCI_BASE | - PCI_SETUP); /* PCI_SETUP */ - outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ - - register_pci_controller(&pnx8550_controller); - - return 0; -} - -arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c deleted file mode 100644 index 71adac323323..000000000000 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(PNX8550_PORT_BASE); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } -} From df55a66addf87bc21ef5678bea238f2c1b2db48a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 4 Nov 2011 11:17:46 +0100 Subject: [PATCH 173/692] MIPS: BCM47xx: fix build with GENERIC_GPIO configuration Since eb9ae7f2 (gpio: fix build error in include/asm-generic/gpio.h) the generic version of gpio.h calls __gpio_{set,get}_value which we do not define. Get rid of asm-generic/gpio.h and define the missing stubs directly for BCM47xx to build. Reported-by: Ralf Baechle To: linux-mips@linux-mips.org CC: Hauke Mehrtens Signed-off-by: Florian Fainelli Patchwork: https://patchwork.linux-mips.org/patch/2885/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-bcm47xx/gpio.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h index 76961cabeedf..2ef17e8df403 100644 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio) return -EINVAL; } +#define gpio_get_value_cansleep gpio_get_value + static inline void gpio_set_value(unsigned gpio, int value) { switch (bcm47xx_bus_type) { @@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value) } } +#define gpio_set_value_cansleep gpio_set_value + +static inline int gpio_cansleep(unsigned gpio) +{ + return 0; +} + +static inline int gpio_is_valid(unsigned gpio) +{ + return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES); +} + + static inline int gpio_direction_input(unsigned gpio) { switch (bcm47xx_bus_type) { @@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value) } -/* cansleep wrappers */ -#include - #endif /* __BCM47XX_GPIO_H */ From e63fb7a9dae820b3ff6754f794fd713f83e32fff Mon Sep 17 00:00:00 2001 From: Venkat Subbiah Date: Mon, 3 Oct 2011 13:31:10 -0700 Subject: [PATCH 174/692] MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD This is to exclude it from force threading to allow RT patch set to work. And while on this line * Remove IRQF_DISABLED as as this flag is NOOP * Add IRQF_PERCPU as this is a per cpu interrupt. Signed-off-by: Venkat Subbiah Acked-by: David Daney To: linux-mips@linux-mips.org To: linux-rt-users@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2817/ Acked-by: Thomas Gleixner Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/smp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 8b606423bbd7..efcfff4d4627 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus) * the other bits alone. */ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); - if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, - "SMP-IPI", mailbox_interrupt)) { + if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI", + mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } } From e94e05eae9a56e4fad93f18a63ae90e7ff02b576 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 8 Nov 2011 21:57:59 +0800 Subject: [PATCH 175/692] arm/mxs: fix mmc device adding for mach-mx28evk The merge commit "526b264 Merge branch 'imx/cleanup' into imx/devel" left a duplicated mx28_add_mxs_mmc() call, which causes the problem below during boot. kobject_add_internal failed for mxs-mmc.1 with -EEXIST, don't try to register things with the same name in the same directory. The patch removes this leftover and also change mmc0 adding to align with mmc1. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index ac2316d53d3c..064ec5abaa55 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -471,7 +471,8 @@ static void __init mx28evk_init(void) "mmc0-slot-power"); if (ret) pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + else + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power"); @@ -480,7 +481,6 @@ static void __init mx28evk_init(void) else mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); gpio_led_register_device(0, &mx28evk_led_data); From d13431ca3eb2a2c14314f04813cdc11cd869f150 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Tue, 8 Nov 2011 14:30:22 +0800 Subject: [PATCH 176/692] Bluetooth: Add support for Broadcom BCM20702A0 Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f9b726091ad0..fe4ebc375b3d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -100,6 +100,9 @@ static struct usb_device_id btusb_table[] = { /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, + /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x413c, 0x8197) }, + { } /* Terminating entry */ }; From 66f5ddf30a59f811818656cb2833c80da0340cfa Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Thu, 3 Nov 2011 11:46:47 -0700 Subject: [PATCH 177/692] x86/mce: Make mce_chrdev_ops 'static const' Arjan would like to make struct file_operations const, but mce-inject directly writes to the mce_chrdev_ops to install its write handler. In an ideal world mce-inject would have its own character device, but we have a sizable legacy of test scripts that hardwire "/dev/mcelog", so it would be painful to switch to a separate device now. Instead, this patch switches to a stub function in the mce code, with a registration helper that mce-inject can call when it is loaded. Note that this would also allow for a sane process to allow mce-inject to be unloaded again (with an unregister function, and appropriate module_{get,put}() calls), but that is left for potential future patches. Reported-by: Arjan van de Ven Signed-off-by: Tony Luck Link: http://lkml.kernel.org/r/4eb2e1971326651a3b@agluck-desktop.sc.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mce.h | 5 ++++- arch/x86/kernel/cpu/mcheck/mce-inject.c | 2 +- arch/x86/kernel/cpu/mcheck/mce.c | 25 ++++++++++++++++++++++--- 3 files changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index c9321f34e55b..0e8ae57d3656 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -201,7 +201,10 @@ int mce_notify_irq(void); void mce_notify_process(void); DECLARE_PER_CPU(struct mce, injectm); -extern struct file_operations mce_chrdev_ops; + +extern void register_mce_write_callback(ssize_t (*)(struct file *filp, + const char __user *ubuf, + size_t usize, loff_t *off)); /* * Exception handler diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index 6199232161cf..319882ef848d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -208,7 +208,7 @@ static int inject_init(void) if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL)) return -ENOMEM; printk(KERN_INFO "Machine check injector initialized\n"); - mce_chrdev_ops.write = mce_write; + register_mce_write_callback(mce_write); register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0, "mce_notify"); return 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 362056aefeb4..2af127d4c3d1 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1634,16 +1634,35 @@ static long mce_chrdev_ioctl(struct file *f, unsigned int cmd, } } -/* Modified in mce-inject.c, so not static or const */ -struct file_operations mce_chrdev_ops = { +static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf, + size_t usize, loff_t *off); + +void register_mce_write_callback(ssize_t (*fn)(struct file *filp, + const char __user *ubuf, + size_t usize, loff_t *off)) +{ + mce_write = fn; +} +EXPORT_SYMBOL_GPL(register_mce_write_callback); + +ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf, + size_t usize, loff_t *off) +{ + if (mce_write) + return mce_write(filp, ubuf, usize, off); + else + return -EINVAL; +} + +static const struct file_operations mce_chrdev_ops = { .open = mce_chrdev_open, .release = mce_chrdev_release, .read = mce_chrdev_read, + .write = mce_chrdev_write, .poll = mce_chrdev_poll, .unlocked_ioctl = mce_chrdev_ioctl, .llseek = no_llseek, }; -EXPORT_SYMBOL_GPL(mce_chrdev_ops); static struct miscdevice mce_chrdev_device = { MISC_MCELOG_MINOR, From 08f2e6312c67fed80df9342e06ad36daf11eb80b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 8 Nov 2011 18:29:15 +0800 Subject: [PATCH 178/692] iommu: omap: Fix compile failure Fix compile failure in drivers/iommu/omap-iommu-debug.c because of missing module.h include. Signed-off-by: Ming Lei Signed-off-by: Joerg Roedel --- drivers/iommu/omap-iommu-debug.c | 1 + drivers/iommu/omap-iovmm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 9c192e79f806..288da5c1499d 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c index e8fdb8830f69..46be456fcc00 100644 --- a/drivers/iommu/omap-iovmm.c +++ b/drivers/iommu/omap-iovmm.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include From b52a360b2aa1c59ba9970fb0f52bbb093fcc7a24 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Mon, 7 Nov 2011 16:10:24 +0000 Subject: [PATCH 179/692] xfs: Fix possible memory corruption in xfs_readlink Fixes a possible memory corruption when the link is larger than MAXPATHLEN and XFS_DEBUG is not enabled. This also remove the S_ISLNK assert, since the inode mode is checked previously in xfs_readlink_by_handle() and via VFS. Updated to address concerns raised by Ben Hutchings about the loose attention paid to 32- vs 64-bit values, and the lack of handling a potentially negative pathlen value: - Changed type of "pathlen" to be xfs_fsize_t, to match that of ip->i_d.di_size - Added checking for a negative pathlen to the too-long pathlen test, and generalized the message that gets reported in that case to reflect the change As a result, if a negative pathlen were encountered, this function would return EFSCORRUPTED (and would fail an assertion for a debug build)--just as would a too-long pathlen. Signed-off-by: Alex Elder Signed-off-by: Carlos Maiolino Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_vnodeops.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 4ecf2a549060..ce9268a2f56b 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -112,7 +112,7 @@ xfs_readlink( char *link) { xfs_mount_t *mp = ip->i_mount; - int pathlen; + xfs_fsize_t pathlen; int error = 0; trace_xfs_readlink(ip); @@ -122,13 +122,19 @@ xfs_readlink( xfs_ilock(ip, XFS_ILOCK_SHARED); - ASSERT(S_ISLNK(ip->i_d.di_mode)); - ASSERT(ip->i_d.di_size <= MAXPATHLEN); - pathlen = ip->i_d.di_size; if (!pathlen) goto out; + if (pathlen < 0 || pathlen > MAXPATHLEN) { + xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)", + __func__, (unsigned long long) ip->i_ino, + (long long) pathlen); + ASSERT(0); + return XFS_ERROR(EFSCORRUPTED); + } + + if (ip->i_df.if_flags & XFS_IFINLINE) { memcpy(link, ip->i_df.if_u1.if_data, pathlen); link[pathlen] = '\0'; From 272e42b215c52d32e06bf035c1f6b70baa6716bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 28 Oct 2011 09:54:24 +0000 Subject: [PATCH 180/692] xfs: constify xfs_item_ops The log item ops aren't nessecarily the biggest exploit vector, but marking them const is easy enough. Also remove the unused xfs_item_ops_t typedef while we're at it. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner Reviewed-by: Alex Elder --- fs/xfs/xfs_buf_item.c | 2 +- fs/xfs/xfs_dquot_item.c | 6 +++--- fs/xfs/xfs_extfree_item.c | 4 ++-- fs/xfs/xfs_inode_item.c | 2 +- fs/xfs/xfs_log.c | 2 +- fs/xfs/xfs_log.h | 2 +- fs/xfs/xfs_trans.h | 6 +++--- 7 files changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 1a3513881bce..eac97ef81e2a 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -656,7 +656,7 @@ xfs_buf_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_buf_item_ops = { +static const struct xfs_item_ops xfs_buf_item_ops = { .iop_size = xfs_buf_item_size, .iop_format = xfs_buf_item_format, .iop_pin = xfs_buf_item_pin, diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c index bb3f71d236d2..0dee0b71029d 100644 --- a/fs/xfs/xfs_dquot_item.c +++ b/fs/xfs/xfs_dquot_item.c @@ -295,7 +295,7 @@ xfs_qm_dquot_logitem_committing( /* * This is the ops vector for dquots */ -static struct xfs_item_ops xfs_dquot_item_ops = { +static const struct xfs_item_ops xfs_dquot_item_ops = { .iop_size = xfs_qm_dquot_logitem_size, .iop_format = xfs_qm_dquot_logitem_format, .iop_pin = xfs_qm_dquot_logitem_pin, @@ -483,7 +483,7 @@ xfs_qm_qoff_logitem_committing( { } -static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, @@ -498,7 +498,7 @@ static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { /* * This is the ops vector shared by all quotaoff-start log items. */ -static struct xfs_item_ops xfs_qm_qoff_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index d22e62623437..35c2aff38b20 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -217,7 +217,7 @@ xfs_efi_item_committing( /* * This is the ops vector shared by all efi log items. */ -static struct xfs_item_ops xfs_efi_item_ops = { +static const struct xfs_item_ops xfs_efi_item_ops = { .iop_size = xfs_efi_item_size, .iop_format = xfs_efi_item_format, .iop_pin = xfs_efi_item_pin, @@ -477,7 +477,7 @@ xfs_efd_item_committing( /* * This is the ops vector shared by all efd log items. */ -static struct xfs_item_ops xfs_efd_item_ops = { +static const struct xfs_item_ops xfs_efd_item_ops = { .iop_size = xfs_efd_item_size, .iop_format = xfs_efd_item_format, .iop_pin = xfs_efd_item_pin, diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index b7cf21ba240f..abaafdbb3e65 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -795,7 +795,7 @@ xfs_inode_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_inode_item_ops = { +static const struct xfs_item_ops xfs_inode_item_ops = { .iop_size = xfs_inode_item_size, .iop_format = xfs_inode_item_format, .iop_pin = xfs_inode_item_pin, diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 2758a6277c52..a14cd89fe465 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -626,7 +626,7 @@ xfs_log_item_init( struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops) + const struct xfs_item_ops *ops) { item->li_mountp = mp; item->li_ailp = mp->m_ail; diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h index 78c9039994af..3f7bf451c034 100644 --- a/fs/xfs/xfs_log.h +++ b/fs/xfs/xfs_log.h @@ -137,7 +137,7 @@ struct xfs_trans; void xfs_log_item_init(struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops); + const struct xfs_item_ops *ops); xfs_lsn_t xfs_log_done(struct xfs_mount *mp, struct xlog_ticket *ticket, diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h index 603f3eb52041..3ae713c0abd9 100644 --- a/fs/xfs/xfs_trans.h +++ b/fs/xfs/xfs_trans.h @@ -326,7 +326,7 @@ typedef struct xfs_log_item { struct xfs_log_item *); /* buffer item iodone */ /* callback func */ - struct xfs_item_ops *li_ops; /* function list */ + const struct xfs_item_ops *li_ops; /* function list */ /* delayed logging */ struct list_head li_cil; /* CIL pointers */ @@ -341,7 +341,7 @@ typedef struct xfs_log_item { { XFS_LI_IN_AIL, "IN_AIL" }, \ { XFS_LI_ABORTED, "ABORTED" } -typedef struct xfs_item_ops { +struct xfs_item_ops { uint (*iop_size)(xfs_log_item_t *); void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *); void (*iop_pin)(xfs_log_item_t *); @@ -352,7 +352,7 @@ typedef struct xfs_item_ops { void (*iop_push)(xfs_log_item_t *); bool (*iop_pushbuf)(xfs_log_item_t *); void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t); -} xfs_item_ops_t; +}; #define IOP_SIZE(ip) (*(ip)->li_ops->iop_size)(ip) #define IOP_FORMAT(ip,vp) (*(ip)->li_ops->iop_format)(ip, vp) From 810627d9a6d0e8820c798001875bc4e1b7754ebf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 8 Nov 2011 08:56:15 +0000 Subject: [PATCH 181/692] xfs: fix force shutdown handling in xfs_end_io Ensure ioend->io_error gets propagated back to e.g. AIO completions. Signed-off-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_aops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 33b13310ee0c..574d4ee9b625 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -189,7 +189,7 @@ xfs_end_io( int error = 0; if (XFS_FORCED_SHUTDOWN(ip->i_mount)) { - error = -EIO; + ioend->io_error = -EIO; goto done; } if (ioend->io_error) From dcaaf9f2c16b56f8bb316881fcd3f15c18fc71e7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Nov 2011 17:50:27 +0100 Subject: [PATCH 182/692] ALSA: usb-audio - Fix the missing volume quirks at delayed init In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: Alexey Fisher Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 109 +++++++++++++++++++++++++--------------------- 1 file changed, 59 insertions(+), 50 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 60f65ace7474..c5444e00f0c6 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -765,10 +765,60 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl) * interface to ALSA control for feature/mixer units */ +/* volume control quirks */ +static void volume_control_quirks(struct usb_mixer_elem_info *cval, + struct snd_kcontrol *kctl) +{ + switch (cval->mixer->chip->usb_id) { + case USB_ID(0x0471, 0x0101): + case USB_ID(0x0471, 0x0104): + case USB_ID(0x0471, 0x0105): + case USB_ID(0x0672, 0x1041): + /* quirk for UDA1321/N101. + * note that detection between firmware 2.1.1.7 (N101) + * and later 2.1.1.21 is not very clear from datasheets. + * I hope that the min value is -15360 for newer firmware --jk + */ + if (!strcmp(kctl->id.name, "PCM Playback Volume") && + cval->min == -15616) { + snd_printk(KERN_INFO + "set volume quirk for UDA1321/N101 chip\n"); + cval->max = -256; + } + break; + + case USB_ID(0x046d, 0x09a4): + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set volume quirk for QuickCam E3500\n"); + cval->min = 6080; + cval->max = 8768; + cval->res = 192; + } + break; + + case USB_ID(0x046d, 0x0808): + case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x0991): + /* Most audio usb devices lie about volume resolution. + * Most Logitech webcams have res = 384. + * Proboly there is some logitech magic behind this number --fishor + */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set resolution quirk: cval->res = 384\n"); + cval->res = 384; + } + break; + + } +} + /* * retrieve the minimum and maximum values for the specified control */ -static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) +static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval, + int default_min, struct snd_kcontrol *kctl) { /* for failsafe */ cval->min = default_min; @@ -844,6 +894,9 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) cval->initialized = 1; } + if (kctl) + volume_control_quirks(cval, kctl); + /* USB descriptions contain the dB scale in 1/256 dB unit * while ALSA TLV contains in 1/100 dB unit */ @@ -864,6 +917,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) return 0; } +#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL) /* get a feature/mixer unit info */ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -882,7 +936,7 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_ uinfo->value.integer.max = 1; } else { if (!cval->initialized) { - get_min_max(cval, 0); + get_min_max_with_quirks(cval, 0, kcontrol); if (cval->initialized && cval->dBmin >= cval->dBmax) { kcontrol->vd[0].access &= ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ | @@ -1045,9 +1099,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, cval->ch_readonly = readonly_mask; } - /* get min/max values */ - get_min_max(cval, 0); - /* if all channels in the mask are marked read-only, make the control * read-only. set_cur_mix_value() will check the mask again and won't * issue write commands to read-only channels. */ @@ -1069,6 +1120,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); + /* get min/max values */ + get_min_max_with_quirks(cval, 0, kctl); + switch (control) { case UAC_FU_MUTE: case UAC_FU_VOLUME: @@ -1118,51 +1172,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, break; } - /* volume control quirks */ - switch (state->chip->usb_id) { - case USB_ID(0x0471, 0x0101): - case USB_ID(0x0471, 0x0104): - case USB_ID(0x0471, 0x0105): - case USB_ID(0x0672, 0x1041): - /* quirk for UDA1321/N101. - * note that detection between firmware 2.1.1.7 (N101) - * and later 2.1.1.21 is not very clear from datasheets. - * I hope that the min value is -15360 for newer firmware --jk - */ - if (!strcmp(kctl->id.name, "PCM Playback Volume") && - cval->min == -15616) { - snd_printk(KERN_INFO - "set volume quirk for UDA1321/N101 chip\n"); - cval->max = -256; - } - break; - - case USB_ID(0x046d, 0x09a4): - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set volume quirk for QuickCam E3500\n"); - cval->min = 6080; - cval->max = 8768; - cval->res = 192; - } - break; - - case USB_ID(0x046d, 0x0808): - case USB_ID(0x046d, 0x0809): - case USB_ID(0x046d, 0x0991): - /* Most audio usb devices lie about volume resolution. - * Most Logitech webcams have res = 384. - * Proboly there is some logitech magic behind this number --fishor - */ - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set resolution quirk: cval->res = 384\n"); - cval->res = 384; - } - break; - - } - range = (cval->max - cval->min) / cval->res; /* Are there devices with volume range more than 255? I use a bit more * to be sure. 384 is a resolution magic number found on Logitech From eca55f4d9c1d918c2aa95fb8a73a34e2ba8a1b11 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 8 Nov 2011 13:07:36 +0000 Subject: [PATCH 183/692] ARM: msm: fix compilation flags for MSM_SCM CONFIG_MSM_SCM uses the smc instruction, which with some toolchains requires a ".arch_extension" directive. Cc: David Brown Signed-off-by: Marc Zyngier Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 ++ arch/arm/mach-msm/scm.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4285dfd80b6f..4ad3969b9881 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) + obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index 232f97a04504..bafabb502580 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr) __asmeq("%1", "r0") __asmeq("%2", "r1") __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif "smc #0 @ switch to secure world\n" : "=r" (r0) : "r" (r0), "r" (r1), "r" (r2) From 10953db8e1a278742ef7e64a3d1491802bcfa98b Mon Sep 17 00:00:00 2001 From: hayeswang Date: Mon, 7 Nov 2011 20:44:37 +0000 Subject: [PATCH 184/692] r8169: increase the delay parameter of pm_schedule_suspend The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 92b45f08858f..6f06aa10f0d7 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1292,7 +1292,7 @@ static void __rtl8169_check_link_status(struct net_device *dev, netif_carrier_off(dev); netif_info(tp, ifdown, dev, "link down\n"); if (pm) - pm_schedule_suspend(&tp->pci_dev->dev, 100); + pm_schedule_suspend(&tp->pci_dev->dev, 5000); } spin_unlock_irqrestore(&tp->lock, flags); } From c457338d7acd3823e765b684a62294cfda9d2f55 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Tue, 8 Nov 2011 04:41:42 +0000 Subject: [PATCH 185/692] ipv6: drop packets when source address is multicast RFC 4291 Section 2.7 says Multicast addresses must not be used as source addresses in IPv6 packets - drop them on input so we don't process the packet further. Signed-off-by: Brian Haley Reported-and-Tested-by: Kumar Sanghvi Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 027c7ff6f1e5..a46c64eb0a66 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -111,6 +111,14 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt ipv6_addr_loopback(&hdr->daddr)) goto err; + /* + * RFC4291 2.7 + * Multicast addresses must not be used as source addresses in IPv6 + * packets or appear in any Routing header. + */ + if (ipv6_addr_is_multicast(&hdr->saddr)) + goto err; + skb->transport_header = skb->network_header + sizeof(*hdr); IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr); From ea1649dea95fb270af94f75e842402c4cfbfc15f Mon Sep 17 00:00:00 2001 From: Nico Erfurth Date: Tue, 8 Nov 2011 07:30:40 +0000 Subject: [PATCH 186/692] Fix incorrect usage of NET_IP_ALIGN The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth Tested-by: Phil Sutter Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 22a7cf951e72..a5b9b12ef268 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -51,6 +51,7 @@ #define USB_VENDOR_ID_SMSC (0x0424) #define USB_PRODUCT_ID_LAN7500 (0x7500) #define USB_PRODUCT_ID_LAN7505 (0x7505) +#define RXW_PADDING 2 #define check_warn(ret, fmt, args...) \ ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); }) @@ -1088,13 +1089,13 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); le32_to_cpus(&rx_cmd_b); - skb_pull(skb, 4 + NET_IP_ALIGN); + skb_pull(skb, 4 + RXW_PADDING); packet = skb->data; /* get the packet length */ - size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN; - align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; + size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING; + align_count = (4 - ((size + RXW_PADDING) % 4)) % 4; if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { netif_dbg(dev, rx_err, dev->net, From 4f1a1eb530071c39fb239fd26c912a64284b1408 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Tue, 8 Nov 2011 09:59:01 -0500 Subject: [PATCH 187/692] MIPS: Kernel hangs occasionally during boot. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. Signed-off-by: Al Cooper Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2911/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-r4k.c | 38 ++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 98c5a9737c14..e2d8e199be32 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) /* * Compare interrupt can be routed and latched outside the core, - * so a single execution hazard barrier may not be enough to give - * it time to clear as seen in the Cause register. 4 time the - * pipeline depth seems reasonably conservative, and empirically - * works better in configurations with high CPU/bus clock ratios. + * so wait up to worst case number of cycle counter ticks for timer interrupt + * changes to propagate to the cause register. */ - -#define compare_change_hazard() \ - do { \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - } while (0) +#define COMPARE_INT_SEEN_TICKS 50 int c0_compare_int_usable(void) { @@ -126,8 +117,12 @@ int c0_compare_int_usable(void) * IP7 already pending? Try to clear it by acking the timer. */ if (c0_compare_int_pending()) { - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; } @@ -136,7 +131,7 @@ int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - compare_change_hazard(); + back_to_back_c0_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -145,12 +140,17 @@ int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ - compare_change_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (c0_compare_int_pending()) + break; if (!c0_compare_int_pending()) return 0; - - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; From a8d12007c795f3d69ee0b2d29f0abfefd55c6120 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 8 Nov 2011 18:02:10 +0000 Subject: [PATCH 188/692] n_gsm: Fix timings Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/tty/n_gsm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4cb0d0a3e57b..fc7bbba585ce 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -66,14 +66,16 @@ static int debug; module_param(debug, int, 0600); -#define T1 (HZ/10) -#define T2 (HZ/3) -#define N2 3 +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ /* Use long timers for testing at low speed with debug on */ #ifdef DEBUG_TIMING -#define T1 HZ -#define T2 (2 * HZ) +#define T1 100 +#define T2 200 #endif /* From 71e63e748ee6f4bad482b8021386eeb74f6e47f1 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 4 Nov 2011 08:10:09 +0100 Subject: [PATCH 189/692] ARM: 7149/1: spi/pl022: Enable clock in probe Make sure we enable the clock before leaving probe. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/spi/spi-pl022.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index f103e470cb63..5559b2299198 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2184,6 +2184,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) goto err_clk_prep; } + status = clk_enable(pl022->clk); + if (status) { + dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n"); + goto err_no_clk_en; + } + /* Disable SSP */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); @@ -2237,6 +2243,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) free_irq(adev->irq[0], pl022); err_no_irq: + clk_disable(pl022->clk); + err_no_clk_en: clk_unprepare(pl022->clk); err_clk_prep: clk_put(pl022->clk); From 8428e84d42179c2a00f5f6450866e70d802d1d05 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 7 Nov 2011 18:05:53 +0100 Subject: [PATCH 190/692] ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors Recent gcc versions generate unaligned accesses by default on ARMv6 and later processors. This patch ensures that the SCTLR.A bit is always cleared on such processors to avoid kernel traping before alignment_init() is called. Signed-off-by: Catalin Marinas Tested-by: John Linn Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 566c54c2a1fe..08c82fd844a8 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -360,7 +360,7 @@ __secondary_data: * r13 = *virtual* address to jump to upon completion */ __enable_mmu: -#ifdef CONFIG_ALIGNMENT_TRAP +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else bic r0, r0, #CR_A From 5f300acd8ae9f3d4585154370012ffc5c665330f Mon Sep 17 00:00:00 2001 From: Dirk B Date: Tue, 8 Nov 2011 18:16:39 +0100 Subject: [PATCH 191/692] ARM: 7152/1: distclean: Remove generated .dtb files The patch 'arm/dt: Add dtb make rule' adds support to create a .dtb file. But this is never removed afterwards. Remove the generated .dtb file if 'distclean' is called. Signed-off-by: Dirk Behme Acked-by: Rob Herring Acked-by: Grant Likely Cc: Shawn Guo Cc: Jason Liu Signed-off-by: Russell King --- arch/arm/boot/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 176062ac7f07..5df26a9976a2 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) +clean-files := *.dtb + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ From e50e705ca71db82a78a3e13fb7abf6b2171ac9c7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Nov 2011 13:59:44 -0500 Subject: [PATCH 192/692] l2tp: fix l2tp_udp_recv_core() pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index bf8d50c67931..cf0f308abf5e 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -756,9 +756,6 @@ static int l2tp_udp_recv_core(struct l2tp_tunnel *tunnel, struct sk_buff *skb, goto error; } - /* Point to L2TP header */ - optr = ptr = skb->data; - /* Trace packet contents, if enabled */ if (tunnel->debug & L2TP_MSG_DATA) { length = min(32u, skb->len); @@ -769,12 +766,15 @@ static int l2tp_udp_recv_core(struct l2tp_tunnel *tunnel, struct sk_buff *skb, offset = 0; do { - printk(" %02X", ptr[offset]); + printk(" %02X", skb->data[offset]); } while (++offset < length); printk("\n"); } + /* Point to L2TP header */ + optr = ptr = skb->data; + /* Get L2TP header flags */ hdrflags = ntohs(*(__be16 *) ptr); From 59caa5612ce916c4902c753aa61429eb76ac2b21 Mon Sep 17 00:00:00 2001 From: oftedal Date: Mon, 7 Nov 2011 11:47:53 +0000 Subject: [PATCH 193/692] sunhme: Allow usage on SBI based SBus systems To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunhme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index c517dac02ae1..cf14ab9db576 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2637,7 +2637,7 @@ static int __devinit happy_meal_sbus_probe_one(struct platform_device *op, int i sbus_dp = op->dev.parent->of_node; /* We can match PCI devices too, do not accept those here. */ - if (strcmp(sbus_dp->name, "sbus")) + if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi")) return err; if (is_qfe) { From 6d67e9beb68bc6712b042c9723cecc87dc8e3f4c Mon Sep 17 00:00:00 2001 From: Feng King Date: Sat, 5 Nov 2011 04:23:23 +0000 Subject: [PATCH 194/692] tcp: Fix comments for Nagle algorithm TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small segments will always pass Nagle test regardless of TCP_NODELAY option. Signed-off-by: Feng King Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 980b98f6288c..63170e297540 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1382,7 +1382,7 @@ static inline int tcp_minshall_check(const struct tcp_sock *tp) /* Return 0, if packet can be sent now without violation Nagle's rules: * 1. It is full sized. * 2. Or it contains FIN. (already checked by caller) - * 3. Or TCP_NODELAY was set. + * 3. Or TCP_CORK is not set, and TCP_NODELAY is set. * 4. Or TCP_CORK is not set, and all sent packets are ACKed. * With Minshall's modification: all sent small packets are ACKed. */ From 20db93c34095553a01a9c31136658917bf1fa5d5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Nov 2011 14:21:44 -0500 Subject: [PATCH 195/692] net: min_pmtu default is 552 Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index cb7f3148035d..f049a1ca186f 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN default FALSE min_pmtu - INTEGER - default 562 - minimum discovered Path MTU + default 552 - minimum discovered Path MTU route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase From 2bc8ca40f951163b3bb75949479e2755c12c1b96 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 11 Oct 2011 01:12:02 +0000 Subject: [PATCH 196/692] ipv4: Fix inetpeer expire time information As we update the learned pmtu informations on demand, we might report a nagative expiration time value to userspace if the pmtu informations are already expired and we have not send a packet to that inetpeer after expiration. With this patch we send a expire time of null to userspace after expiration until the next packet is send to that inetpeer. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 155138d8ec8b..511f4a75149c 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2845,7 +2845,7 @@ static int rt_fill_info(struct net *net, struct rtable *rt = skb_rtable(skb); struct rtmsg *r; struct nlmsghdr *nlh; - long expires = 0; + unsigned long expires = 0; const struct inet_peer *peer = rt->peer; u32 id = 0, ts = 0, tsage = 0, error; @@ -2902,8 +2902,12 @@ static int rt_fill_info(struct net *net, tsage = get_seconds() - peer->tcp_ts_stamp; } expires = ACCESS_ONCE(peer->pmtu_expires); - if (expires) - expires -= jiffies; + if (expires) { + if (time_before(jiffies, expires)) + expires -= jiffies; + else + expires = 0; + } } if (rt_is_input_route(rt)) { From 917c16b2b69fc2eeb432eabca73258f08c58361e Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 8 Nov 2011 14:49:59 -0500 Subject: [PATCH 197/692] Btrfs: fix oops on NULL trans handle in btrfs_truncate If we fail to reserve space in the transaction during truncate, we can error out with a NULL trans handle. The cleanup code needs an extra check to make sure we aren't trying to use the bad handle. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 9d0eaa57d4ee..f60e2490bd0d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6529,14 +6529,16 @@ static int btrfs_truncate(struct inode *inode) ret = btrfs_orphan_del(NULL, inode); } - trans->block_rsv = &root->fs_info->trans_block_rsv; - ret = btrfs_update_inode(trans, root, inode); - if (ret && !err) - err = ret; + if (trans) { + trans->block_rsv = &root->fs_info->trans_block_rsv; + ret = btrfs_update_inode(trans, root, inode); + if (ret && !err) + err = ret; - nr = trans->blocks_used; - ret = btrfs_end_transaction_throttle(trans, root); - btrfs_btree_balance_dirty(root, nr); + nr = trans->blocks_used; + ret = btrfs_end_transaction_throttle(trans, root); + btrfs_btree_balance_dirty(root, nr); + } out: btrfs_free_block_rsv(root, rsv); From 6aec187a90aeb883533c9180e2acac1e54c87f7d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 8 Nov 2011 14:56:50 -0500 Subject: [PATCH 198/692] drivers/media: video/a5k6aa is a module and so needs module.h This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: Paul Gortmaker --- drivers/media/video/s5k6aa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 2446736b7871..0df7f2a41814 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include From c26887d2a48600bfa87a27ce41ff78828bd7243c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Nov 2011 09:20:07 +0100 Subject: [PATCH 199/692] cfg80211: fix missing kernel-doc Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 92cf1c2c30c9..95852e36713b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -456,6 +456,9 @@ enum station_parameters_apply_mask { * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the * QoS info field (but already shifted down) + * @sta_modify_mask: bitmap indicating which parameters changed + * (for those that don't have a natural "no change" value), + * see &enum station_parameters_apply_mask */ struct station_parameters { u8 *supported_rates; @@ -615,6 +618,7 @@ struct sta_bss_parameters { * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. + * @sta_flags: station flags mask & values */ struct station_info { u32 filled; From a59be0811c322f80aaa886b144239393efece42d Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Tue, 8 Nov 2011 14:01:13 +0100 Subject: [PATCH 200/692] ath: Fix NULL ptr dereference in ath_reg_apply_world_flags This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/ath/regd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 028310f263c8..f1be57f0f5bb 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -253,6 +253,8 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; /* * If no country IE has been received always enable active scan From cc438fccd5783c9f7b4c4858358ac897dcf8a58d Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Tue, 8 Nov 2011 15:54:46 +0200 Subject: [PATCH 201/692] wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira Acked-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 128ccb79318c..fc29c671cf3b 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -559,7 +559,7 @@ wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, break; } /* Fail if SSID isn't present in the filters */ - if (j == req->n_ssids) { + if (j == cmd->n_ssids) { ret = -EINVAL; goto out_free; } From b9c913f327ccc5cf422b6dc9b5acfbc9b86e7b62 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:17:25 -0800 Subject: [PATCH 202/692] x86 platform drivers: make Dell laptop driver select needed LED support Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: Alessandro Suardi Acked-by: Matthew Garrett Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f4e3d82379d7..598d5b82a6bc 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -85,6 +85,8 @@ config DELL_LAPTOP depends on RFKILL || RFKILL = n depends on POWER_SUPPLY depends on SERIO_I8042 + select LEDS_CLASS + select NEW_LEDS default n ---help--- This driver adds support for rfkill and backlight control to Dell From 7fd2ae21a42d178982679b86086661292b4afe4a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 8 Nov 2011 15:47:34 -0500 Subject: [PATCH 203/692] Btrfs: fix our reservations for updating an inode when completing io People have been reporting ENOSPC crashes in finish_ordered_io. This is because we try to steal from the delalloc block rsv to satisfy a reservation to update the inode. The problem with this is we don't explicitly save space for updating the inode when doing delalloc. This is kind of a problem and we've gotten away with this because way back when we just stole from the delalloc reserve without any questions, and this worked out fine because generally speaking the leaf had been modified either by the mtime update when we did the original write or because we just updated the leaf when we inserted the file extent item, only on rare occasions had the leaf not actually been modified, and that was still ok because we'd just use a block or two out of the over-reservation that is delalloc. Then came the delayed inode stuff. This is amazing, except it wants a full reservation for updating the inode since it may do it at some point down the road after we've written the blocks and we have to recow everything again. This worked out because the delayed inode stuff just stole from the global reserve, that is until recently when I changed that because it caused other problems. So here we are, we're doing everything right and being screwed for it. So take an extra reservation for the inode at delalloc reservation time and carry it through the life of the delalloc reservation. If we need it we can steal it in the delayed inode stuff. If we have already stolen it try and do a normal metadata reservation. If that fails try to steal from the delalloc reservation. If _that_ fails we'll get a WARN_ON() so I can start thinking of a better way to solve this and in the meantime we'll steal from the global reserve. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't see any problems. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/btrfs_inode.h | 4 +-- fs/btrfs/delayed-inode.c | 65 ++++++++++++++++++++++++++++++++++++++-- fs/btrfs/extent-tree.c | 24 ++++++++++++--- fs/btrfs/inode.c | 1 + 4 files changed, 84 insertions(+), 10 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 5a5d325a3935..634608d2a6d0 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -147,14 +147,12 @@ struct btrfs_inode { * the btrfs file release call will add this inode to the * ordered operations list so that we make sure to flush out any * new data the application may have written before commit. - * - * yes, its silly to have a single bitflag, but we might grow more - * of these. */ unsigned ordered_data_close:1; unsigned orphan_meta_reserved:1; unsigned dummy_inode:1; unsigned in_defrag:1; + unsigned delalloc_meta_reserved:1; /* * always compress this one file diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index bbe8496d5339..313ee14cf3b7 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -617,12 +617,14 @@ static void btrfs_delayed_item_release_metadata(struct btrfs_root *root, static int btrfs_delayed_inode_reserve_metadata( struct btrfs_trans_handle *trans, struct btrfs_root *root, + struct inode *inode, struct btrfs_delayed_node *node) { struct btrfs_block_rsv *src_rsv; struct btrfs_block_rsv *dst_rsv; u64 num_bytes; int ret; + int release = false; src_rsv = trans->block_rsv; dst_rsv = &root->fs_info->delayed_block_rsv; @@ -652,11 +654,67 @@ static int btrfs_delayed_inode_reserve_metadata( if (!ret) node->bytes_reserved = num_bytes; return ret; + } else if (src_rsv == &root->fs_info->delalloc_block_rsv) { + spin_lock(&BTRFS_I(inode)->lock); + if (BTRFS_I(inode)->delalloc_meta_reserved) { + BTRFS_I(inode)->delalloc_meta_reserved = 0; + spin_unlock(&BTRFS_I(inode)->lock); + release = true; + goto migrate; + } + spin_unlock(&BTRFS_I(inode)->lock); + + /* Ok we didn't have space pre-reserved. This shouldn't happen + * too often but it can happen if we do delalloc to an existing + * inode which gets dirtied because of the time update, and then + * isn't touched again until after the transaction commits and + * then we try to write out the data. First try to be nice and + * reserve something strictly for us. If not be a pain and try + * to steal from the delalloc block rsv. + */ + ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes); + if (!ret) + goto out; + + ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + if (!ret) + goto out; + + /* + * Ok this is a problem, let's just steal from the global rsv + * since this really shouldn't happen that often. + */ + WARN_ON(1); + ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv, + dst_rsv, num_bytes); + goto out; } +migrate: ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); - if (!ret) - node->bytes_reserved = num_bytes; + if (unlikely(ret)) { + /* This shouldn't happen */ + BUG_ON(release); + return ret; + } + +out: + /* + * Migrate only takes a reservation, it doesn't touch the size of the + * block_rsv. This is to simplify people who don't normally have things + * migrated from their block rsv. If they go to release their + * reservation, that will decrease the size as well, so if migrate + * reduced size we'd end up with a negative size. But for the + * delalloc_meta_reserved stuff we will only know to drop 1 reservation, + * but we could in fact do this reserve/migrate dance several times + * between the time we did the original reservation and we'd clean it + * up. So to take care of this, release the space for the meta + * reservation here. I think it may be time for a documentation page on + * how block rsvs. work. + */ + if (release) + btrfs_block_rsv_release(root, src_rsv, num_bytes); + node->bytes_reserved = num_bytes; return ret; } @@ -1708,7 +1766,8 @@ int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, goto release_node; } - ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node); + ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode, + delayed_node); if (ret) goto release_node; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 18ea90c8943b..0b044e509e9f 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4063,23 +4063,30 @@ int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans, */ static unsigned drop_outstanding_extent(struct inode *inode) { + unsigned drop_inode_space = 0; unsigned dropped_extents = 0; BUG_ON(!BTRFS_I(inode)->outstanding_extents); BTRFS_I(inode)->outstanding_extents--; + if (BTRFS_I(inode)->outstanding_extents == 0 && + BTRFS_I(inode)->delalloc_meta_reserved) { + drop_inode_space = 1; + BTRFS_I(inode)->delalloc_meta_reserved = 0; + } + /* * If we have more or the same amount of outsanding extents than we have * reserved then we need to leave the reserved extents count alone. */ if (BTRFS_I(inode)->outstanding_extents >= BTRFS_I(inode)->reserved_extents) - return 0; + return drop_inode_space; dropped_extents = BTRFS_I(inode)->reserved_extents - BTRFS_I(inode)->outstanding_extents; BTRFS_I(inode)->reserved_extents -= dropped_extents; - return dropped_extents; + return dropped_extents + drop_inode_space; } /** @@ -4165,9 +4172,18 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) nr_extents = BTRFS_I(inode)->outstanding_extents - BTRFS_I(inode)->reserved_extents; BTRFS_I(inode)->reserved_extents += nr_extents; - - to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); } + + /* + * Add an item to reserve for updating the inode when we complete the + * delalloc io. + */ + if (!BTRFS_I(inode)->delalloc_meta_reserved) { + nr_extents++; + BTRFS_I(inode)->delalloc_meta_reserved = 1; + } + + to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); to_reserve += calc_csum_metadata_size(inode, num_bytes, 1); spin_unlock(&BTRFS_I(inode)->lock); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f60e2490bd0d..2b920596c126 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6607,6 +6607,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->orphan_meta_reserved = 0; ei->dummy_inode = 0; ei->in_defrag = 0; + ei->delalloc_meta_reserved = 0; ei->force_compress = BTRFS_COMPRESS_NONE; ei->delayed_node = NULL; From dccefb3729c8c2b17e45c68cdc0d575f2473a5f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:49:29 -0800 Subject: [PATCH 204/692] x86 platform drivers: add POWER_SUPPLY to selected drivers for Dell The Kconfig loop detection goes crazy without this. Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 598d5b82a6bc..7f43cf86d776 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -83,8 +83,8 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n - depends on POWER_SUPPLY depends on SERIO_I8042 + select POWER_SUPPLY select LEDS_CLASS select NEW_LEDS default n From 156acb166ea9a43d7fcdf9b8051694ce4e91dbfc Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 8 Nov 2011 22:34:00 +0100 Subject: [PATCH 205/692] PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: Thomas Meyer Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 434a6c011675..95706fa24c73 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -669,7 +669,7 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) struct device_opp *dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) - return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */ + return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->head; } From 24ed6ddd9cbf084f1a2dfa3ef66287e5277002e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 25 Oct 2011 21:14:10 +0200 Subject: [PATCH 206/692] m68k: Revive lost ARAnyM config options commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the ARAnyM config options. Re-add them to the "Platform devices" section. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.devices | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index d214034be6a6..6033f5d4e67e 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -24,6 +24,37 @@ config PROC_HARDWARE including the model, CPU, MMU, clock speed, BogoMIPS rating, and memory size. +config NATFEAT + bool "ARAnyM emulator support" + depends on ATARI + help + This option enables support for ARAnyM native features, such as + access to a disk image as /dev/hda. + +config NFBLOCK + tristate "NatFeat block device support" + depends on BLOCK && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat block device + which allows direct access to the hard drives without using + the hardware emulation. + +config NFCON + tristate "NatFeat console driver" + depends on NATFEAT + help + Say Y to include support for the ARAnyM NatFeat console driver + which allows the console output to be redirected to the stderr + output of ARAnyM. + +config NFETH + tristate "NatFeat Ethernet support" + depends on ETHERNET && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat network device + which will emulate a regular ethernet device while presenting an + ethertap device to the host system. + endmenu menu "Character devices" From 59433a59b073b88cb32efd03af8ac9b13d56f4cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Oct 2011 22:37:21 +0200 Subject: [PATCH 207/692] m68k: Revive lost DIO bus config option commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the DIO bus config option. Re-add it to the "Bus support" section. Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig.bus | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index 8294f0c1785e..3adb499584fb 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -2,6 +2,15 @@ if MMU comment "Bus Support" +config DIO + bool "DIO bus support" + depends on HP300 + default y + help + Say Y here to enable support for the "DIO" expansion bus used in + HP300 machines. If you are using such a system you almost certainly + want this. + config NUBUS bool depends on MAC From 3ec7215e5d1a714ef65069a1d0999a31e4930bb7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 25 May 2011 21:40:59 +0200 Subject: [PATCH 208/692] ide-{cd,floppy,tape}: Do not include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The top of has this comment: * Please do not include this file in generic code. There is currently * no requirement for any architecture to implement anything held * within this file. * * Thanks. --rmk Remove inclusion of , to prevent the following compile error from happening soon: | include/linux/irq.h:132: error: redefinition of ‘struct irq_data’ | include/linux/irq.h:286: error: redefinition of ‘struct irq_chip’ Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner Acked-by: Borislav Petkov Cc: linux-ide@vger.kernel.org --- drivers/ide/ide-cd.c | 1 - drivers/ide/ide-floppy.c | 1 - drivers/ide/ide-tape.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 04b09564bfa9..8126824daccb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -43,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include -#include #include #include #include diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 61fdf544fbd6..3d42043fec51 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7ecb1ade8874..ce8237d36159 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include From c288bf2533e57174b90b07860c4391bcd1ea269c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2011 22:31:28 +0200 Subject: [PATCH 209/692] m68k/irq: Rename irq_controller to irq_chip Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 9 ++-- arch/m68k/amiga/cia.c | 18 ++++---- arch/m68k/apollo/dn_ints.c | 11 +++-- arch/m68k/atari/ataints.c | 15 +++---- arch/m68k/include/asm/irq.h | 15 +++---- arch/m68k/kernel/ints.c | 86 ++++++++++++++++++------------------- arch/m68k/mac/macints.c | 9 ++-- arch/m68k/q40/q40ints.c | 17 ++++---- arch/m68k/sun3/sun3ints.c | 13 +++--- 9 files changed, 91 insertions(+), 102 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c5b5212cc3f9..320c5d048dc7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -52,11 +52,10 @@ static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); static irqreturn_t ami_int5(int irq, void *dev_id); -static struct irq_controller amiga_irq_controller = { +static struct irq_chip amiga_irq_chip = { .name = "amiga", - .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock), - .enable = amiga_enable_irq, - .disable = amiga_disable_irq, + .irq_enable = amiga_enable_irq, + .irq_disable = amiga_disable_irq, }; /* @@ -81,7 +80,7 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index ecd0f7ca6f0e..637ef53112b6 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -121,11 +121,10 @@ static void cia_disable_irq(unsigned int irq) cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA)); } -static struct irq_controller cia_irq_controller = { +static struct irq_chip cia_irq_chip = { .name = "cia", - .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock), - .enable = cia_enable_irq, - .disable = cia_disable_irq, + .irq_enable = cia_enable_irq, + .irq_disable = cia_disable_irq, }; /* @@ -158,23 +157,22 @@ static void auto_disable_irq(unsigned int irq) } } -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .enable = auto_enable_irq, - .disable = auto_disable_irq, + .irq_enable = auto_enable_irq, + .irq_disable = auto_disable_irq, }; void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS); + m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1); + m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); m68k_irq_startup(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 5d47f3aa3810..d6e8f33466be 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,7 +12,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(unsigned int irq) { if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); @@ -29,16 +29,15 @@ void apollo_irq_shutdown(unsigned int irq) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -static struct irq_controller apollo_irq_controller = { +static struct irq_chip apollo_irq_chip = { .name = "apollo", - .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock), - .startup = apollo_irq_startup, - .shutdown = apollo_irq_shutdown, + .irq_startup = apollo_irq_startup, + .irq_shutdown = apollo_irq_shutdown, }; void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16); + m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 26a804e67bce..ac0ebdf6ca72 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,7 +320,7 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static int atari_startup_irq(unsigned int irq) +static unsigned int atari_startup_irq(unsigned int irq) { m68k_irq_startup(irq); atari_turnon_irq(irq); @@ -338,13 +338,12 @@ static void atari_shutdown_irq(unsigned int irq) vectors[VEC_INT4] = falcon_hblhandler; } -static struct irq_controller atari_irq_controller = { +static struct irq_chip atari_irq_chip = { .name = "atari", - .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock), - .startup = atari_startup_irq, - .shutdown = atari_shutdown_irq, - .enable = atari_enable_irq, - .disable = atari_disable_irq, + .irq_startup = atari_startup_irq, + .irq_shutdown = atari_shutdown_irq, + .irq_enable = atari_enable_irq, + .irq_disable = atari_disable_irq, }; /* @@ -361,7 +360,7 @@ static struct irq_controller atari_irq_controller = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 69ed0d74d532..d8c6f68b7a78 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -93,16 +93,15 @@ struct irq_handler { const char *devname; }; -struct irq_controller { +struct irq_chip { const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); + unsigned int (*irq_startup)(unsigned int irq); + void (*irq_shutdown)(unsigned int irq); + void (*irq_enable)(unsigned int irq); + void (*irq_disable)(unsigned int irq); }; -extern int m68k_irq_startup(unsigned int); +extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* @@ -113,7 +112,7 @@ extern irq_node_t *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); +extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 761ee0440c99..f43ad7b93ab6 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -52,23 +52,21 @@ extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ static struct irq_node *irq_list[NR_IRQS]; -static struct irq_controller *irq_controller[NR_IRQS]; +static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; static int m68k_first_user_vec; -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; -static struct irq_controller user_irq_controller = { +static struct irq_chip user_irq_chip = { .name = "user", - .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; #define NUM_IRQ_NODES 100 @@ -96,7 +94,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_controller[i] = &auto_irq_controller; + irq_chip[i] = &auto_irq_chip; mach_init_IRQ(); } @@ -136,7 +134,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_controller[IRQ_USER + i] = &user_irq_controller; + irq_chip[IRQ_USER + i] = &user_irq_chip; *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -144,7 +142,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, } /** - * m68k_setup_irq_controller + * m68k_setup_irq_chip * @contr: irq controller which controls specified irq * @irq: first irq to be managed by the controller * @@ -153,13 +151,13 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, * be changed as well, but the controller probably should use m68k_irq_startup/ * m68k_irq_shutdown. */ -void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq, +void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, unsigned int cnt) { int i; for (i = 0; i < cnt; i++) - irq_controller[irq + i] = contr; + irq_chip[irq + i] = contr; } irq_node_t *new_irq_node(void) @@ -180,23 +178,23 @@ irq_node_t *new_irq_node(void) int setup_irq(unsigned int irq, struct irq_node *node) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **prev; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d from %s\n", __func__, irq, node->devname); return -ENXIO; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); prev = irq_list + irq; if (*prev) { /* Can't share interrupts unless both agree to */ if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return -EBUSY; } while (*prev) @@ -204,15 +202,15 @@ int setup_irq(unsigned int irq, struct irq_node *node) } if (!irq_list[irq]) { - if (contr->startup) - contr->startup(irq); + if (contr->irq_startup) + contr->irq_startup(irq); else - contr->enable(irq); + contr->irq_enable(irq); } node->next = NULL; *prev = node; - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return 0; } @@ -244,16 +242,16 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **p, *node; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); p = irq_list + irq; while ((node = *p)) { @@ -270,58 +268,58 @@ void free_irq(unsigned int irq, void *dev_id) __func__, irq); if (!irq_list[irq]) { - if (contr->shutdown) - contr->shutdown(irq); + if (contr->irq_shutdown) + contr->irq_shutdown(irq); else - contr->disable(irq); + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(free_irq); void enable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (irq_depth[irq]) { if (!--irq_depth[irq]) { - if (contr->enable) - contr->enable(irq); + if (contr->irq_enable) + contr->irq_enable(irq); } } else WARN_ON(1); - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(enable_irq); void disable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (!irq_depth[irq]++) { - if (contr->disable) - contr->disable(irq); + if (contr->irq_disable) + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(disable_irq); @@ -330,7 +328,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -413,13 +411,13 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node *node; int i = *(loff_t *) v; /* autovector interrupts */ if (irq_list[i]) { - contr = irq_controller[i]; + contr = irq_chip[i]; node = irq_list[i]; seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); while ((node = node->next)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index f92190c159b4..ffa1b3f7e2b7 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,11 +193,10 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); -static struct irq_controller mac_irq_controller = { +static struct irq_chip mac_irq_chip = { .name = "mac", - .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock), - .enable = mac_enable_irq, - .disable = mac_disable_irq, + .irq_enable = mac_enable_irq, + .irq_disable = mac_disable_irq, }; void __init mac_init_IRQ(void) @@ -205,7 +204,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER, + m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index 9f0e3d59bf92..fa05a03f8dfe 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -41,14 +41,14 @@ static void q40_disable_irq(unsigned int); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(unsigned int irq) { /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: case 11: case 12: case 13: printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq); - return -ENXIO; + /* FIXME return -ENXIO; */ } return 0; } @@ -57,13 +57,12 @@ static void q40_irq_shutdown(unsigned int irq) { } -static struct irq_controller q40_irq_controller = { +static struct irq_chip q40_irq_chip = { .name = "q40", - .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock), - .startup = q40_irq_startup, - .shutdown = q40_irq_shutdown, - .enable = q40_enable_irq, - .disable = q40_disable_irq, + .irq_startup = q40_irq_startup, + .irq_shutdown = q40_irq_shutdown, + .irq_enable = q40_enable_irq, + .irq_disable = q40_disable_irq, }; /* @@ -81,7 +80,7 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX); + m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 6464ad3ae3e6..97fa9edc5a9d 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,13 +86,12 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } -static struct irq_controller sun3_irq_controller = { +static struct irq_chip sun3_irq_chip = { .name = "sun3", - .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, - .enable = sun3_enable_irq, - .disable = sun3_disable_irq, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, + .irq_enable = sun3_enable_irq, + .irq_disable = sun3_disable_irq, }; void __init sun3_init_IRQ(void) @@ -100,7 +99,7 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7); + m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) From 0dde595be678c06e7de27c98f45403088f1b126a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:39:08 +0200 Subject: [PATCH 210/692] m68k/irq: Kill irq_node_t typedef, always use struct irq_node Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 8 ++++---- arch/m68k/kernel/ints.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d8c6f68b7a78..bfc521f35bdf 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,13 +75,13 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -typedef struct irq_node { +struct irq_node { irqreturn_t (*handler)(int, void *); void *dev_id; struct irq_node *next; unsigned long flags; const char *devname; -} irq_node_t; +}; /* * This structure has only 4 elements for speed reasons @@ -105,9 +105,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new irq_node_t + * This function returns a new struct irq_node */ -extern irq_node_t *new_irq_node(void); +extern struct irq_node *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f43ad7b93ab6..9de8eb4eaefb 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static irq_node_t nodes[NUM_IRQ_NODES]; +static struct irq_node nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -irq_node_t *new_irq_node(void) +struct irq_node *new_irq_node(void) { - irq_node_t *node; + struct irq_node *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { From 6549d537922da6a6893e9bc1be9c2b89db663719 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:59:23 +0200 Subject: [PATCH 211/692] m68k/irq: Rename irq_node to irq_data Make it more similar to the genirq version: - Add an irq field Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 9 +++++---- arch/m68k/kernel/ints.c | 21 +++++++++++---------- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index bfc521f35bdf..3cb037c36d10 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,10 +75,11 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -struct irq_node { +struct irq_data { + unsigned int irq; irqreturn_t (*handler)(int, void *); void *dev_id; - struct irq_node *next; + struct irq_data *next; unsigned long flags; const char *devname; }; @@ -105,9 +106,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new struct irq_node + * This function returns a new struct irq_data */ -extern struct irq_node *new_irq_node(void); +extern struct irq_data *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 9de8eb4eaefb..88779320d406 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -51,7 +51,7 @@ extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ -static struct irq_node *irq_list[NR_IRQS]; +static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static struct irq_node nodes[NUM_IRQ_NODES]; +static struct irq_data nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -struct irq_node *new_irq_node(void) +struct irq_data *new_irq_node(void) { - struct irq_node *node; + struct irq_data *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { @@ -176,10 +176,10 @@ struct irq_node *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_node *node) +int setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; - struct irq_node **prev; + struct irq_data **prev; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -219,13 +219,14 @@ int request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *devname, void *dev_id) { - struct irq_node *node; + struct irq_data *node; int res; node = new_irq_node(); if (!node) return -ENOMEM; + node->irq = irq; node->handler = handler; node->flags = flags; node->dev_id = dev_id; @@ -243,7 +244,7 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { struct irq_chip *contr; - struct irq_node **p, *node; + struct irq_data **p, *node; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -386,7 +387,7 @@ EXPORT_SYMBOL(irq_canonicalize); asmlinkage void m68k_handle_int(unsigned int irq) { - struct irq_node *node; + struct irq_data *node; kstat_cpu(0).irqs[irq]++; node = irq_list[irq]; do { @@ -412,7 +413,7 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { struct irq_chip *contr; - struct irq_node *node; + struct irq_data *node; int i = *(loff_t *) v; /* autovector interrupts */ From e8abf5e73cdb6c034d35ccba1f63a4801cd3dec5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 22:53:04 +0200 Subject: [PATCH 212/692] m68k/irq: Switch irq_chip methods to "struct irq_data *data" Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 16 ++++++++-------- arch/m68k/amiga/cia.c | 25 ++++++++++++++----------- arch/m68k/apollo/dn_ints.c | 8 ++++++-- arch/m68k/atari/ataints.c | 30 ++++++++++++++++++++++-------- arch/m68k/include/asm/irq.h | 13 +++++++------ arch/m68k/kernel/ints.c | 23 +++++++++++++++-------- arch/m68k/mac/macints.c | 14 ++++++++++++-- arch/m68k/q40/q40ints.c | 28 +++++++++++++++++----------- arch/m68k/sun3/sun3ints.c | 14 ++++++++++++-- 9 files changed, 113 insertions(+), 58 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 320c5d048dc7..09a695babfe9 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -45,8 +45,8 @@ #include #include -static void amiga_enable_irq(unsigned int irq); -static void amiga_disable_irq(unsigned int irq); +static void amiga_irq_enable(struct irq_data *data); +static void amiga_irq_disable(struct irq_data *data); static irqreturn_t ami_int1(int irq, void *dev_id); static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); @@ -54,8 +54,8 @@ static irqreturn_t ami_int5(int irq, void *dev_id); static struct irq_chip amiga_irq_chip = { .name = "amiga", - .irq_enable = amiga_enable_irq, - .irq_disable = amiga_disable_irq, + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, }; /* @@ -102,14 +102,14 @@ void __init amiga_init_IRQ(void) * internal data, that may not be changed by the interrupt at the same time. */ -static void amiga_enable_irq(unsigned int irq) +static void amiga_irq_enable(struct irq_data *data) { - amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER)); + amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER)); } -static void amiga_disable_irq(unsigned int irq) +static void amiga_irq_disable(struct irq_data *data) { - amiga_custom.intena = 1 << (irq - IRQ_USER); + amiga_custom.intena = 1 << (data->irq - IRQ_USER); } /* diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 637ef53112b6..b04b453718d9 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -98,8 +98,9 @@ static irqreturn_t cia_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static void cia_enable_irq(unsigned int irq) +static void cia_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; unsigned char mask; if (irq >= IRQ_AMIGA_CIAB) { @@ -113,8 +114,10 @@ static void cia_enable_irq(unsigned int irq) } } -static void cia_disable_irq(unsigned int irq) +static void cia_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= IRQ_AMIGA_CIAB) cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB)); else @@ -123,8 +126,8 @@ static void cia_disable_irq(unsigned int irq) static struct irq_chip cia_irq_chip = { .name = "cia", - .irq_enable = cia_enable_irq, - .irq_disable = cia_disable_irq, + .irq_enable = cia_irq_enable, + .irq_disable = cia_irq_disable, }; /* @@ -133,9 +136,9 @@ static struct irq_chip cia_irq_chip = { * into this chain. */ -static void auto_enable_irq(unsigned int irq) +static void auto_irq_enable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_SETCLR | IF_PORTS; break; @@ -145,9 +148,9 @@ static void auto_enable_irq(unsigned int irq) } } -static void auto_disable_irq(unsigned int irq) +static void auto_irq_disable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_PORTS; break; @@ -159,8 +162,8 @@ static void auto_disable_irq(unsigned int irq) static struct irq_chip auto_irq_chip = { .name = "auto", - .irq_enable = auto_enable_irq, - .irq_disable = auto_disable_irq, + .irq_enable = auto_irq_enable, + .irq_disable = auto_irq_disable, }; void __init cia_init_IRQ(struct ciabase *base) @@ -173,7 +176,7 @@ void __init cia_init_IRQ(struct ciabase *base) /* override auto int and install CIA handler */ m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); - m68k_irq_startup(base->handler_irq); + m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) pr_err("Couldn't register %s interrupt\n", base->name); diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index d6e8f33466be..2bdab498b6c1 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,8 +12,10 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -unsigned int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); else @@ -21,8 +23,10 @@ unsigned int apollo_irq_startup(unsigned int irq) return 0; } -void apollo_irq_shutdown(unsigned int irq) +void apollo_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) |= (1 << irq); else diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index ac0ebdf6ca72..7f4e5a9b77c5 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,30 +320,44 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static unsigned int atari_startup_irq(unsigned int irq) +static unsigned int atari_irq_startup(struct irq_data *data) { - m68k_irq_startup(irq); + unsigned int irq = data->irq; + + m68k_irq_startup(data); atari_turnon_irq(irq); atari_enable_irq(irq); return 0; } -static void atari_shutdown_irq(unsigned int irq) +static void atari_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + atari_disable_irq(irq); atari_turnoff_irq(irq); - m68k_irq_shutdown(irq); + m68k_irq_shutdown(data); if (irq == IRQ_AUTO_4) vectors[VEC_INT4] = falcon_hblhandler; } +static void atari_irq_enable(struct irq_data *data) +{ + atari_enable_irq(data->irq); +} + +static void atari_irq_disable(struct irq_data *data) +{ + atari_disable_irq(data->irq); +} + static struct irq_chip atari_irq_chip = { .name = "atari", - .irq_startup = atari_startup_irq, - .irq_shutdown = atari_shutdown_irq, - .irq_enable = atari_enable_irq, - .irq_disable = atari_disable_irq, + .irq_startup = atari_irq_startup, + .irq_shutdown = atari_irq_shutdown, + .irq_enable = atari_irq_enable, + .irq_disable = atari_irq_disable, }; /* diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 3cb037c36d10..423f064955f2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -96,14 +96,15 @@ struct irq_handler { struct irq_chip { const char *name; - unsigned int (*irq_startup)(unsigned int irq); - void (*irq_shutdown)(unsigned int irq); - void (*irq_enable)(unsigned int irq); - void (*irq_disable)(unsigned int irq); + unsigned int (*irq_startup)(struct irq_data *data); + void (*irq_shutdown)(struct irq_data *data); + void (*irq_enable)(struct irq_data *data); + void (*irq_disable)(struct irq_data *data); }; -extern unsigned int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); /* * This function returns a new struct irq_data diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 88779320d406..404d832f5d35 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -203,9 +203,9 @@ int setup_irq(unsigned int irq, struct irq_data *node) if (!irq_list[irq]) { if (contr->irq_startup) - contr->irq_startup(irq); + contr->irq_startup(node); else - contr->irq_enable(irq); + contr->irq_enable(node); } node->next = NULL; *prev = node; @@ -270,9 +270,9 @@ void free_irq(unsigned int irq, void *dev_id) if (!irq_list[irq]) { if (contr->irq_shutdown) - contr->irq_shutdown(irq); + contr->irq_shutdown(node); else - contr->irq_disable(irq); + contr->irq_disable(node); } local_irq_restore(flags); @@ -295,7 +295,7 @@ void enable_irq(unsigned int irq) if (irq_depth[irq]) { if (!--irq_depth[irq]) { if (contr->irq_enable) - contr->irq_enable(irq); + contr->irq_enable(irq_list[irq]); } } else WARN_ON(1); @@ -318,7 +318,7 @@ void disable_irq(unsigned int irq) local_irq_save(flags); if (!irq_depth[irq]++) { if (contr->irq_disable) - contr->irq_disable(irq); + contr->irq_disable(irq_list[irq]); } local_irq_restore(flags); } @@ -329,7 +329,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -unsigned int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -338,8 +338,15 @@ unsigned int m68k_irq_startup(unsigned int irq) return 0; } -void m68k_irq_shutdown(unsigned int irq) +unsigned int m68k_irq_startup(struct irq_data *data) { + return m68k_irq_startup_irq(data->irq); +} + +void m68k_irq_shutdown(struct irq_data *data) +{ + unsigned int irq = data->irq; + if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = bad_inthandler; else diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ffa1b3f7e2b7..3cee6d29cc5d 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,10 +193,20 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); +static void mac_irq_enable(struct irq_data *data) +{ + mac_enable_irq(data->irq); +} + +static void mac_irq_disable(struct irq_data *data) +{ + mac_disable_irq(data->irq); +} + static struct irq_chip mac_irq_chip = { .name = "mac", - .irq_enable = mac_enable_irq, - .irq_disable = mac_disable_irq, + .irq_enable = mac_irq_enable, + .irq_disable = mac_irq_disable, }; void __init mac_init_IRQ(void) diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index fa05a03f8dfe..cb245f972e1a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -35,14 +35,16 @@ */ static void q40_irq_handler(unsigned int, struct pt_regs *fp); -static void q40_enable_irq(unsigned int); -static void q40_disable_irq(unsigned int); +static void q40_irq_enable(struct irq_data *data); +static void q40_irq_disable(struct irq_data *data); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static unsigned int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: @@ -53,7 +55,7 @@ static unsigned int q40_irq_startup(unsigned int irq) return 0; } -static void q40_irq_shutdown(unsigned int irq) +static void q40_irq_shutdown(struct irq_data *data) { } @@ -61,8 +63,8 @@ static struct irq_chip q40_irq_chip = { .name = "q40", .irq_startup = q40_irq_startup, .irq_shutdown = q40_irq_shutdown, - .irq_enable = q40_enable_irq, - .irq_disable = q40_disable_irq, + .irq_enable = q40_irq_enable, + .irq_disable = q40_irq_disable, }; /* @@ -85,8 +87,8 @@ void __init q40_init_IRQ(void) /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); - m68k_irq_startup(IRQ_AUTO_2); - m68k_irq_startup(IRQ_AUTO_4); + m68k_irq_startup_irq(IRQ_AUTO_2); + m68k_irq_startup_irq(IRQ_AUTO_4); /* now enable some ints.. */ master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */ @@ -292,20 +294,24 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) return; } -void q40_enable_irq(unsigned int irq) +void q40_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= 5 && irq <= 15) { mext_disabled--; if (mext_disabled > 0) - printk("q40_enable_irq : nested disable/enable\n"); + printk("q40_irq_enable : nested disable/enable\n"); if (mext_disabled == 0) master_outb(1, EXT_ENABLE_REG); } } -void q40_disable_irq(unsigned int irq) +void q40_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + /* disable ISA iqs : only do something if the driver has been * verified to be Q40 "compatible" - right now IDE, NE2K * Any driver should not attempt to sleep across disable_irq !! diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 97fa9edc5a9d..5d45e0065d2e 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,12 +86,22 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } +static void sun3_irq_enable(struct irq_data *data) +{ + sun3_enable_irq(data->irq); +}; + +static void sun3_irq_disable(struct irq_data *data) +{ + sun3_disable_irq(data->irq); +}; + static struct irq_chip sun3_irq_chip = { .name = "sun3", .irq_startup = m68k_irq_startup, .irq_shutdown = m68k_irq_shutdown, - .irq_enable = sun3_enable_irq, - .irq_disable = sun3_disable_irq, + .irq_enable = sun3_irq_enable, + .irq_disable = sun3_irq_disable, }; void __init sun3_init_IRQ(void) From 13d6da35813babaa1bc8c6799b2666191911100e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Apr 2011 20:10:53 +0200 Subject: [PATCH 213/692] m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static It has nothing to do with the standard one in Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 404d832f5d35..e68a3bd5de6e 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -176,7 +176,7 @@ struct irq_data *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_data *node) +static int m68k_setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; struct irq_data **prev; @@ -232,7 +232,7 @@ int request_irq(unsigned int irq, node->dev_id = dev_id; node->devname = devname; - res = setup_irq(irq, node); + res = m68k_setup_irq(irq, node); if (res) node->handler = NULL; From 40a72c8f711bdf8ae3e4f945261ced5432dcac4d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 May 2011 22:33:41 +0200 Subject: [PATCH 214/692] m68k/irq: Extract irq_set_chip() Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e68a3bd5de6e..4f9868e160bd 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -55,6 +55,12 @@ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; +static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) +{ + irq_chip[irq] = chip; + return 0; +} + static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -94,7 +100,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_chip[i] = &auto_irq_chip; + irq_set_chip(i, &auto_irq_chip); mach_init_IRQ(); } @@ -134,7 +140,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_chip[IRQ_USER + i] = &user_irq_chip; + irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -157,7 +163,7 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, int i; for (i = 0; i < cnt; i++) - irq_chip[irq + i] = contr; + irq_set_chip(irq + i, contr); } struct irq_data *new_irq_node(void) From edb347256c44366888debb4f9e8477ac700a9026 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:15:21 +0200 Subject: [PATCH 215/692] m68k/irq: Add m68k_setup_irq_controller() This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 3 ++- arch/m68k/amiga/cia.c | 6 ++++-- arch/m68k/apollo/dn_ints.c | 3 ++- arch/m68k/atari/ataints.c | 3 ++- arch/m68k/include/asm/irq.h | 2 ++ arch/m68k/mac/macints.c | 2 +- arch/m68k/q40/q40ints.c | 3 ++- arch/m68k/sun3/sun3ints.c | 3 ++- 8 files changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 09a695babfe9..8af5ea3eea67 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -80,7 +80,8 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index b04b453718d9..84663ae824ef 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -168,14 +168,16 @@ static struct irq_chip auto_irq_chip = { void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); + m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq, + base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); + m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq, + base->handler_irq, 1); m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 2bdab498b6c1..bdc44282fdba 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -43,5 +43,6 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); + m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, + IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 7f4e5a9b77c5..6149ff994641 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -374,7 +374,8 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, + NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 423f064955f2..d0b7efd1f1e2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -115,6 +115,8 @@ extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); +#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ + m68k_setup_irq_chip((chip), (irq), (cnt)) asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 3cee6d29cc5d..98497d288a9b 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -214,7 +214,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, + m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index cb245f972e1a..a8a5ce8b18fc 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -82,7 +82,8 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); + m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1, + Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 5d45e0065d2e..20461278e535 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,8 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); + m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, + IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) From 1425df87c25b15400c9f26d57821bcfe01286b2a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 1 Jul 2011 20:39:19 +0200 Subject: [PATCH 216/692] m68k/irq: Rename {,__}m68k_handle_int() - Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 24 ++++++++++++------------ arch/m68k/amiga/cia.c | 2 +- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/include/asm/irq.h | 4 ++-- arch/m68k/kernel/entry_mm.S | 4 ++-- arch/m68k/kernel/ints.c | 10 +++++----- arch/m68k/mac/baboon.c | 2 +- arch/m68k/mac/oss.c | 4 ++-- arch/m68k/mac/psc.c | 2 +- arch/m68k/mac/via.c | 6 +++--- arch/m68k/q40/q40ints.c | 8 ++++---- arch/m68k/sun3/sun3ints.c | 2 +- 12 files changed, 35 insertions(+), 35 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 8af5ea3eea67..0daa7fce9df1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -124,19 +124,19 @@ static irqreturn_t ami_int1(int irq, void *dev_id) /* if serial transmit buffer empty, interrupt */ if (ints & IF_TBE) { amiga_custom.intreq = IF_TBE; - m68k_handle_int(IRQ_AMIGA_TBE); + generic_handle_irq(IRQ_AMIGA_TBE); } /* if floppy disk transfer complete, interrupt */ if (ints & IF_DSKBLK) { amiga_custom.intreq = IF_DSKBLK; - m68k_handle_int(IRQ_AMIGA_DSKBLK); + generic_handle_irq(IRQ_AMIGA_DSKBLK); } /* if software interrupt set, interrupt */ if (ints & IF_SOFT) { amiga_custom.intreq = IF_SOFT; - m68k_handle_int(IRQ_AMIGA_SOFT); + generic_handle_irq(IRQ_AMIGA_SOFT); } return IRQ_HANDLED; } @@ -148,19 +148,19 @@ static irqreturn_t ami_int3(int irq, void *dev_id) /* if a blitter interrupt */ if (ints & IF_BLIT) { amiga_custom.intreq = IF_BLIT; - m68k_handle_int(IRQ_AMIGA_BLIT); + generic_handle_irq(IRQ_AMIGA_BLIT); } /* if a copper interrupt */ if (ints & IF_COPER) { amiga_custom.intreq = IF_COPER; - m68k_handle_int(IRQ_AMIGA_COPPER); + generic_handle_irq(IRQ_AMIGA_COPPER); } /* if a vertical blank interrupt */ if (ints & IF_VERTB) { amiga_custom.intreq = IF_VERTB; - m68k_handle_int(IRQ_AMIGA_VERTB); + generic_handle_irq(IRQ_AMIGA_VERTB); } return IRQ_HANDLED; } @@ -172,25 +172,25 @@ static irqreturn_t ami_int4(int irq, void *dev_id) /* if audio 0 interrupt */ if (ints & IF_AUD0) { amiga_custom.intreq = IF_AUD0; - m68k_handle_int(IRQ_AMIGA_AUD0); + generic_handle_irq(IRQ_AMIGA_AUD0); } /* if audio 1 interrupt */ if (ints & IF_AUD1) { amiga_custom.intreq = IF_AUD1; - m68k_handle_int(IRQ_AMIGA_AUD1); + generic_handle_irq(IRQ_AMIGA_AUD1); } /* if audio 2 interrupt */ if (ints & IF_AUD2) { amiga_custom.intreq = IF_AUD2; - m68k_handle_int(IRQ_AMIGA_AUD2); + generic_handle_irq(IRQ_AMIGA_AUD2); } /* if audio 3 interrupt */ if (ints & IF_AUD3) { amiga_custom.intreq = IF_AUD3; - m68k_handle_int(IRQ_AMIGA_AUD3); + generic_handle_irq(IRQ_AMIGA_AUD3); } return IRQ_HANDLED; } @@ -202,13 +202,13 @@ static irqreturn_t ami_int5(int irq, void *dev_id) /* if serial receive buffer full interrupt */ if (ints & IF_RBF) { /* acknowledge of IF_RBF must be done by the serial interrupt */ - m68k_handle_int(IRQ_AMIGA_RBF); + generic_handle_irq(IRQ_AMIGA_RBF); } /* if a disk sync interrupt */ if (ints & IF_DSKSYN) { amiga_custom.intreq = IF_DSKSYN; - m68k_handle_int(IRQ_AMIGA_DSKSYN); + generic_handle_irq(IRQ_AMIGA_DSKSYN); } return IRQ_HANDLED; } diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 84663ae824ef..18c0e29976e3 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -93,7 +93,7 @@ static irqreturn_t cia_handler(int irq, void *dev_id) amiga_custom.intreq = base->int_mask; for (; ints; mach_irq++, ints >>= 1) { if (ints & 1) - m68k_handle_int(mach_irq); + generic_handle_irq(mach_irq); } return IRQ_HANDLED; } diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index bdc44282fdba..4b764312aed0 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -6,7 +6,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) { - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d0b7efd1f1e2..9a2bae8ef5b7 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -118,8 +118,8 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); #define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ m68k_setup_irq_chip((chip), (irq), (cnt)) -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); +extern void generic_handle_irq(unsigned int); +asmlinkage void do_IRQ(int irq, struct pt_regs *regs); #else #define irq_canonicalize(irq) (irq) diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index bd0ec05263b2..f5927d0927b4 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -207,7 +207,7 @@ ENTRY(auto_inthandler) movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack auto_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack ret_from_interrupt: @@ -241,7 +241,7 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack user_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 4f9868e160bd..15dbbe297334 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -110,7 +110,7 @@ void __init init_IRQ(void) * @handler: called from auto vector interrupts * * setup the handler to be called from auto vector interrupts instead of the - * standard __m68k_handle_int(), it will be called with irq numbers in the range + * standard do_IRQ(), it will be called with irq numbers in the range * from IRQ_AUTO_1 - IRQ_AUTO_7. */ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)) @@ -129,7 +129,7 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default __m68k_handle_int(), it will be called + * to be called instead of the default do_IRQ(), it will be called * with irq numbers starting from IRQ_USER. */ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, @@ -398,7 +398,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -asmlinkage void m68k_handle_int(unsigned int irq) +void generic_handle_irq(unsigned int irq) { struct irq_data *node; kstat_cpu(0).irqs[irq]++; @@ -409,11 +409,11 @@ asmlinkage void m68k_handle_int(unsigned int irq) } while (node); } -asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs) +asmlinkage void do_IRQ(int irq, struct pt_regs *regs) { struct pt_regs *old_regs; old_regs = set_irq_regs(regs); - m68k_handle_int(irq); + generic_handle_irq(irq); set_irq_regs(old_regs); } diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 2a96bebd8969..f264791b8694 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -72,7 +72,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) do { if (events & irq_bit) { baboon->mb_ifr &= ~irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_bit <<= 1; irq_num++; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a9c0f5ab4cc0..ad512419affc 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -113,7 +113,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) /* FIXME: call sound handler */ } else if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; - m68k_handle_int(IRQ_MAC_SCSI); + generic_handle_irq(IRQ_MAC_SCSI); } else { /* FIXME: error check here? */ } @@ -148,7 +148,7 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) irq_bit >>= 1; if (events & irq_bit) { oss->irq_pending &= ~irq_bit; - m68k_handle_int(NUBUS_SOURCE_BASE + i); + generic_handle_irq(NUBUS_SOURCE_BASE + i); } } while(events & (irq_bit - 1)); return IRQ_HANDLED; diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index a4c3eb60706e..26c2b6595808 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -152,7 +152,7 @@ irqreturn_t psc_irq(int irq, void *dev_id) do { if (events & irq_bit) { psc_write_byte(pIFR, irq_bit); - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_num++; irq_bit <<= 1; diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index e71166daec6a..067857046137 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -460,7 +460,7 @@ irqreturn_t via1_irq(int irq, void *dev_id) do { if (events & irq_bit) { via1[vIFR] = irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -482,7 +482,7 @@ irqreturn_t via2_irq(int irq, void *dev_id) do { if (events & irq_bit) { via2[gIFR] = irq_bit | rbv_clear; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -514,7 +514,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) do { if (events & slot_bit) { events &= ~slot_bit; - m68k_handle_int(slot_irq); + generic_handle_irq(slot_irq); } --slot_irq; slot_bit >>= 1; diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index a8a5ce8b18fc..afe600c03659 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -220,11 +220,11 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) switch (irq) { case 4: case 6: - __m68k_handle_int(Q40_IRQ_SAMPLE, fp); + do_IRQ(Q40_IRQ_SAMPLE, fp); return; } if (mir & Q40_IRQ_FRAME_MASK) { - __m68k_handle_int(Q40_IRQ_FRAME, fp); + do_IRQ(Q40_IRQ_FRAME, fp); master_outb(-1, FRAME_CLEAR_REG); } if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) { @@ -259,7 +259,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) goto iirq; } q40_state[irq] |= IRQ_INPROGRESS; - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); q40_state[irq] &= ~IRQ_INPROGRESS; /* naively enable everything, if that fails than */ @@ -290,7 +290,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) mir = master_inb(IIRQ_REG); /* should test whether keyboard irq is really enabled, doing it in defhand */ if (mir & Q40_IRQ_KEYB_MASK) - __m68k_handle_int(Q40_IRQ_KEYBOARD, fp); + do_IRQ(Q40_IRQ_KEYBOARD, fp); return; } diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20461278e535..20ffee7dc319 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -83,7 +83,7 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); } static void sun3_irq_enable(struct irq_data *data) From 5a2394534b160ce18f9a705cf9de40e77648f8a2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: [PATCH 217/692] m68k/irq: Remove obsolete IRQ_FLG_* users The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 29 ----------------------------- arch/m68k/hp300/time.c | 2 +- arch/m68k/kernel/ints.c | 19 ------------------- arch/m68k/mac/iop.c | 10 ++++------ arch/m68k/mac/oss.c | 13 +++++-------- arch/m68k/mac/via.c | 22 ++++++++-------------- arch/m68k/mvme147/config.c | 3 +-- drivers/macintosh/via-macii.c | 2 +- drivers/macintosh/via-maciisi.c | 4 ++-- 9 files changed, 22 insertions(+), 82 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 0daa7fce9df1..e5f3033499e7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -4,35 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 11/07/96: rewritten interrupt handling, irq lists are exists now only for - * this sources where it makes sense (VERTB/PORTS/EXTER) and you must - * be careful that dev_id for this sources is unique since this the - * only possibility to distinguish between different handlers for - * free_irq. irq lists also have different irq flags: - * - IRQ_FLG_FAST: handler is inserted at top of list (after other - * fast handlers) - * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before - * they're executed irq level is set to the previous - * one, but handlers don't need to be reentrant, if - * reentrance occurred, slow handlers will be just - * called again. - * The whole interrupt handling for CIAs is moved to cia.c - * /Roman Zippel - * - * 07/08/99: rewamp of the interrupt handling - we now have two types of - * interrupts, normal and fast handlers, fast handlers being - * marked with IRQF_DISABLED and runs with all other interrupts - * disabled. Normal interrupts disable their own source but - * run with all other interrupt sources enabled. - * PORTS and EXTER interrupts are always shared even if the - * drivers do not explicitly mark this when calling - * request_irq which they really should do. - * This is similar to the way interrupts are handled on all - * other architectures and makes a ton of sense besides - * having the advantage of making it easier to share - * drivers. - * /Jes */ #include diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c index f6312c7d8727..c87fe69b0728 100644 --- a/arch/m68k/hp300/time.c +++ b/arch/m68k/hp300/time.c @@ -70,7 +70,7 @@ void __init hp300_sched_init(irq_handler_t vector) asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE)); - if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector)) + if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector)) pr_err("Couldn't register timer interrupt\n"); out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */ diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 15dbbe297334..f6a469865125 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -4,25 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 07/03/96: Timer initialization, and thus mach_sched_init(), - * removed from request_irq() and moved to init_time(). - * We should therefore consider renaming our add_isr() and - * remove_isr() to request_irq() and free_irq() - * respectively, so they are compliant with the other - * architectures. /Jes - * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls. - * Removed irq list support, if any machine needs an irq server - * it must implement this itself (as it's already done), instead - * only default handler are used with mach_default_handler. - * request_irq got some flags different from other architectures: - * - IRQ_FLG_REPLACE : Replace an existing handler (the default one - * can be replaced without this flag) - * - IRQ_FLG_LOCK : handler can't be replaced - * There are other machine depending flags, see there - * If you want to replace a default handler you should know what - * you're doing, since it might handle different other irq sources - * which must be served /Roman Zippel */ #include diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 1ad4e9d80eba..a5462cc0bfd6 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -305,15 +305,13 @@ void __init iop_register_interrupts(void) { if (iop_ism_present) { if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, - IRQ_FLG_LOCK, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); oss_irq_enable(IRQ_MAC_ADB); } else { - if (request_irq(IRQ_VIA2_0, iop_ism_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", + (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); } if (!iop_alive(iop_base[IOP_NUM_ISM])) { diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ad512419affc..1eb60f071007 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -65,17 +65,14 @@ void __init oss_init(void) void __init oss_register_interrupts(void) { - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK, - "scsi", (void *) oss)) + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK, - "nubus", (void *) oss)) + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK, - "sound", (void *) oss)) + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK, - "via1", (void *) via1)) + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index 067857046137..af9ed33bec14 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -281,7 +281,7 @@ void __init via_init_clock(irq_handler_t func) via1[vT1CL] = MAC_CLOCK_LOW; via1[vT1CH] = MAC_CLOCK_HIGH; - if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func)) + if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func)) pr_err("Couldn't register %s interrupt\n", "timer"); } @@ -292,25 +292,19 @@ void __init via_init_clock(irq_handler_t func) void __init via_register_interrupts(void) { if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "software", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } else { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } - if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST, - "via2", (void *) via2)) + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2)) + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) pr_err("Couldn't register %s interrupt\n", "nubus"); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 6cb9c3a9b6c9..01f2adf3f19f 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -114,8 +114,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id) void mvme147_sched_init (irq_handler_t timer_routine) { tick_handler = timer_routine; - if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE, - "timer 1", NULL)) + if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL)) pr_err("Couldn't register timer interrupt\n"); /* Init the clock with a value */ diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 817f37a875c9..c9570fcf1cce 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -159,7 +159,7 @@ int macii_init(void) err = macii_init_via(); if (err) goto out; - err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB", + err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB", macii_interrupt); if (err) goto out; diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 9ab5b0c34f0d..34d02a91b29f 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -122,8 +122,8 @@ maciisi_init(void) return err; } - if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, - "ADB", maciisi_interrupt)) { + if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB", + maciisi_interrupt)) { printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB); return -EAGAIN; } From 4936f63cb790e265eb30a1e1630bb90bd6af0e7a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 21 Apr 2011 22:50:52 +0200 Subject: [PATCH 218/692] m68k/irq: Add genirq support Disabled on all platforms for now Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 17 +++++++++++ arch/m68k/include/asm/hardirq.h | 5 ++++ arch/m68k/include/asm/irq.h | 41 ++++++++++++++++++++------ arch/m68k/kernel/Makefile | 9 ++++-- arch/m68k/kernel/ints.c | 52 ++++++++++++++++++++++++++++++++- 5 files changed, 112 insertions(+), 12 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6c28582fb98f..a7597e119ab0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -84,6 +84,23 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA +config USE_GENERIC_HARDIRQS + bool "Use genirq" + depends on MMU + depends on !AMIGA + depends on !ATARI + depends on !MAC + depends on !APOLLO + depends on !MVME147 + depends on !MVME16x + depends on !BVME6000 + depends on !HP300 + depends on !SUN3X + depends on !Q40 + depends on !SUN3 + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW + menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h index 870e5347155b..db30ed276878 100644 --- a/arch/m68k/include/asm/hardirq.h +++ b/arch/m68k/include/asm/hardirq.h @@ -18,6 +18,11 @@ #ifdef CONFIG_MMU +static inline void ack_bad_irq(unsigned int irq) +{ + pr_crit("unexpected IRQ trap at vector %02x\n", irq); +} + /* entry.S is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 9a2bae8ef5b7..518e61f2fccb 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -27,11 +27,6 @@ #ifdef CONFIG_MMU -#include -#include -#include -#include - /* * Interrupt source definitions * General interrupt sources are the level 1-7. @@ -54,10 +49,6 @@ #define IRQ_USER 8 -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - /* * various flags for request_irq() - the Amiga now uses the standard * mechanism like all other architectures - IRQF_DISABLED and @@ -71,6 +62,15 @@ struct pt_regs; #define IRQ_FLG_STD (0x8000) /* internally used */ #endif +#ifndef CONFIG_GENERIC_HARDIRQS + +#include +#include +#include +#include + +struct pt_regs; + /* * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). @@ -121,10 +121,33 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); extern void generic_handle_irq(unsigned int); asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +#else /* CONFIG_GENERIC_HARDIRQS */ + +struct irq_data; +struct irq_chip; +struct irq_desc; +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_chip *, + void (*handle)(unsigned int irq, + struct irq_desc *desc), + unsigned int irq, unsigned int cnt); + +#endif /* CONFIG_GENERIC_HARDIRQS */ + +extern unsigned int irq_canonicalize(unsigned int irq); + #else #define irq_canonicalize(irq) (irq) #endif /* CONFIG_MMU */ asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +extern atomic_t irq_err_count; #endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index e7f0f2e5ad44..141425785c4e 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -9,13 +9,18 @@ extra-y += vmlinux.lds obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ sys_m68k.o syscalltable.o time.o traps.o -obj-$(CONFIG_MMU) += ints.o devres.o vectors.o +obj-$(CONFIG_MMU) += ints.o vectors.o devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o endif ifndef CONFIG_MMU -obj-y += init_task.o irq.o +obj-y += init_task.o +endif +ifdef CONFIG_GENERIC_HARDIRQS +obj-y += irq.o +else +obj-y += devres.o endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f6a469865125..cea439f9819b 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,6 +31,7 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; +#ifndef CONFIG_GENERIC_HARDIRQS /* table for system interrupt handlers */ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; @@ -41,6 +42,8 @@ static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) irq_chip[irq] = chip; return 0; } +#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) +#endif /* !CONFIG_GENERIC_HARDIRQS */ static int m68k_first_user_vec; @@ -56,8 +59,10 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; +#ifndef CONFIG_GENERIC_HARDIRQS #define NUM_IRQ_NODES 100 static struct irq_data nodes[NUM_IRQ_NODES]; +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* * void init_IRQ(void) @@ -81,7 +86,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_set_chip(i, &auto_irq_chip); + irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq); mach_init_IRQ(); } @@ -128,6 +133,35 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } +#ifdef CONFIG_GENERIC_HARDIRQS + +/** + * m68k_setup_irq_controller + * @chip: irq chip which controls specified irq + * @handle: flow handler which handles specified irq + * @irq: first irq to be managed by the controller + * @cnt: number of irqs to be managed by the controller + * + * Change the controller for the specified range of irq, which will be used to + * manage these irq. auto/user irq already have a default controller, which can + * be changed as well, but the controller probably should use m68k_irq_startup/ + * m68k_irq_shutdown. + */ +void m68k_setup_irq_controller(struct irq_chip *chip, + irq_flow_handler_t handle, unsigned int irq, + unsigned int cnt) +{ + int i; + + for (i = 0; i < cnt; i++) { + irq_set_chip(irq + i, chip); + if (handle) + irq_set_handler(irq + i, handle); + } +} + +#else /* !CONFIG_GENERIC_HARDIRQS */ + /** * m68k_setup_irq_chip * @contr: irq controller which controls specified irq @@ -316,6 +350,8 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); +#endif /* !CONFIG_GENERIC_HARDIRQS */ + unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -341,6 +377,8 @@ void m68k_irq_shutdown(struct irq_data *data) } +#ifndef CONFIG_GENERIC_HARDIRQS + /* * Do we need these probe functions on the m68k? * @@ -367,6 +405,7 @@ int probe_irq_off (unsigned long irqs) } EXPORT_SYMBOL(probe_irq_off); +#endif /* CONFIG_GENERIC_HARDIRQS */ unsigned int irq_canonicalize(unsigned int irq) { @@ -379,6 +418,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); +#ifndef CONFIG_GENERIC_HARDIRQS void generic_handle_irq(unsigned int irq) { struct irq_data *node; @@ -428,3 +468,13 @@ void init_irq_proc(void) /* Insert /proc/irq driver here */ } #endif + +#else /* CONFIG_GENERIC_HARDIRQS */ + +asmlinkage void handle_badint(struct pt_regs *regs) +{ + atomic_inc(&irq_err_count); + pr_warn("unexpected interrupt from %u\n", regs->vector); +} + +#endif /* CONFIG_GENERIC_HARDIRQS */ From e59629ddc6eddbd00e81b4afb814583cfcc4706d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Apr 2011 23:35:21 +0200 Subject: [PATCH 219/692] m68k/atari: Convert Atari to genirq Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index a7597e119ab0..9d60f4004076 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,7 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !AMIGA - depends on !ATARI depends on !MAC depends on !APOLLO depends on !MVME147 From 34971bad3a1511db7b76eeb2337819967a135075 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 19:36:30 +0200 Subject: [PATCH 220/692] m68k/atari: Remove code and comments about different irq types This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/atari/ataints.c | 236 -------------------------------------- 1 file changed, 236 deletions(-) diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 6149ff994641..af544557dd1d 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -60,244 +60,8 @@ * ): Autovector interrupts are 1..7, then follow ST-MFP, * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can * be allocated by atari_register_vme_int(). - * - * Each interrupt can be of three types: - * - * - SLOW: The handler runs with all interrupts enabled, except the one it - * was called by (to avoid reentering). This should be the usual method. - * But it is currently possible only for MFP ints, since only the MFP - * offers an easy way to mask interrupts. - * - * - FAST: The handler runs with all interrupts disabled. This should be used - * only for really fast handlers, that just do actions immediately - * necessary, and let the rest do a bottom half or task queue. - * - * - PRIORITIZED: The handler can be interrupted by higher-level ints - * (greater IPL, no MFP priorities!). This is the method of choice for ints - * which should be slow, but are not from a MFP. - * - * The feature of more than one handler for one int source is still there, but - * only applicable if all handers are of the same type. To not slow down - * processing of ints with only one handler by the chaining feature, the list - * calling function atari_call_irq_list() is only plugged in at the time the - * second handler is registered. - * - * Implementation notes: For fast-as-possible int handling, there are separate - * entry points for each type (slow/fast/prio). The assembler handler calls - * the irq directly in the usual case, no C wrapper is involved. In case of - * multiple handlers, atari_call_irq_list() is registered as handler and calls - * in turn the real irq's. To ease access from assembler level to the irq - * function pointer and accompanying data, these two are stored in a separate - * array, irq_handler[]. The rest of data (type, name) are put into a second - * array, irq_param, that is accessed from C only. For each slow interrupt (32 - * in all) there are separate handler functions, which makes it possible to - * hard-code the MFP register address and value, are necessary to mask the - * int. If there'd be only one generic function, lots of calculations would be - * needed to determine MFP register and int mask from the vector number :-( - * - * Furthermore, slow ints may not lower the IPL below its previous value - * (before the int happened). This is needed so that an int of class PRIO, on - * that this int may be stacked, cannot be reentered. This feature is - * implemented as follows: If the stack frame format is 1 (throwaway), the int - * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level - * 2, which still blocks the HSYNC, but no interrupts of interest. If the - * frame format is 0, the int is nested, and the old IPL value can be found in - * the sr copy in the frame. */ -#if 0 - -#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES) - -typedef void (*asm_irq_handler)(void); - -struct irqhandler { - irqreturn_t (*handler)(int, void *, struct pt_regs *); - void *dev_id; -}; - -struct irqparam { - unsigned long flags; - const char *devname; -}; - -/* - * Array with irq's and their parameter data. This array is accessed from low - * level assembler code, so an element size of 8 allows usage of index scaling - * addressing mode. - */ -static struct irqhandler irq_handler[NUM_INT_SOURCES]; - -/* - * This array hold the rest of parameters of int handlers: type - * (slow,fast,prio) and the name of the handler. These values are only - * accessed from C - */ -static struct irqparam irq_param[NUM_INT_SOURCES]; - -/* check for valid int number (complex, sigh...) */ -#define IS_VALID_INTNO(n) \ - ((n) > 0 && \ - /* autovec and ST-MFP ok anyway */ \ - (((n) < TTMFP_SOURCE_BASE) || \ - /* TT-MFP ok if present */ \ - ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \ - ATARIHW_PRESENT(TT_MFP)) || \ - /* SCC ok if present and number even */ \ - ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \ - !((n) & 1) && ATARIHW_PRESENT(SCC)) || \ - /* greater numbers ok if they are registered VME vectors */ \ - ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \ - free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE))))) - - -/* - * Here start the assembler entry points for interrupts - */ - -#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void) - -#define BUILD_SLOW_IRQ(n) \ -asmlinkage void IRQ_NAME(n); \ -/* Dummy function to allow asm with operands. */ \ -void atari_slow_irq_##n##_dummy (void) { \ -__asm__ (__ALIGN_STR "\n" \ -"atari_slow_irq_" #n "_handler:\t" \ -" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \ - SAVE_ALL_INT "\n" \ - GET_CURRENT(%%d0) "\n" \ -" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \ - /* get old IPL from stack frame */ \ -" bfextu %%sp@(%c2){#5,#3},%%d0\n" \ -" movew %%sr,%%d1\n" \ -" bfins %%d0,%%d1{#21,#3}\n" \ -" movew %%d1,%%sr\n" /* set IPL = previous value */ \ -" addql #1,%a0\n" \ -" lea %a1,%%a0\n" \ -" pea %%sp@\n" /* push addr of frame */ \ -" movel %%a0@(4),%%sp@-\n" /* push handler data */ \ -" pea (%c3+8)\n" /* push int number */ \ -" movel %%a0@,%%a0\n" \ -" jbsr %%a0@\n" /* call the handler */ \ -" addql #8,%%sp\n" \ -" addql #4,%%sp\n" \ -" orw #0x0600,%%sr\n" \ -" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \ -" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \ -" jbra ret_from_interrupt\n" \ - : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \ - "n" (PT_OFF_SR), "n" (n), \ - "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \ - : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \ - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \ -); \ - for (;;); /* fake noreturn */ \ -} - -BUILD_SLOW_IRQ(0); -BUILD_SLOW_IRQ(1); -BUILD_SLOW_IRQ(2); -BUILD_SLOW_IRQ(3); -BUILD_SLOW_IRQ(4); -BUILD_SLOW_IRQ(5); -BUILD_SLOW_IRQ(6); -BUILD_SLOW_IRQ(7); -BUILD_SLOW_IRQ(8); -BUILD_SLOW_IRQ(9); -BUILD_SLOW_IRQ(10); -BUILD_SLOW_IRQ(11); -BUILD_SLOW_IRQ(12); -BUILD_SLOW_IRQ(13); -BUILD_SLOW_IRQ(14); -BUILD_SLOW_IRQ(15); -BUILD_SLOW_IRQ(16); -BUILD_SLOW_IRQ(17); -BUILD_SLOW_IRQ(18); -BUILD_SLOW_IRQ(19); -BUILD_SLOW_IRQ(20); -BUILD_SLOW_IRQ(21); -BUILD_SLOW_IRQ(22); -BUILD_SLOW_IRQ(23); -BUILD_SLOW_IRQ(24); -BUILD_SLOW_IRQ(25); -BUILD_SLOW_IRQ(26); -BUILD_SLOW_IRQ(27); -BUILD_SLOW_IRQ(28); -BUILD_SLOW_IRQ(29); -BUILD_SLOW_IRQ(30); -BUILD_SLOW_IRQ(31); - -asm_irq_handler slow_handlers[32] = { - [0] = atari_slow_irq_0_handler, - [1] = atari_slow_irq_1_handler, - [2] = atari_slow_irq_2_handler, - [3] = atari_slow_irq_3_handler, - [4] = atari_slow_irq_4_handler, - [5] = atari_slow_irq_5_handler, - [6] = atari_slow_irq_6_handler, - [7] = atari_slow_irq_7_handler, - [8] = atari_slow_irq_8_handler, - [9] = atari_slow_irq_9_handler, - [10] = atari_slow_irq_10_handler, - [11] = atari_slow_irq_11_handler, - [12] = atari_slow_irq_12_handler, - [13] = atari_slow_irq_13_handler, - [14] = atari_slow_irq_14_handler, - [15] = atari_slow_irq_15_handler, - [16] = atari_slow_irq_16_handler, - [17] = atari_slow_irq_17_handler, - [18] = atari_slow_irq_18_handler, - [19] = atari_slow_irq_19_handler, - [20] = atari_slow_irq_20_handler, - [21] = atari_slow_irq_21_handler, - [22] = atari_slow_irq_22_handler, - [23] = atari_slow_irq_23_handler, - [24] = atari_slow_irq_24_handler, - [25] = atari_slow_irq_25_handler, - [26] = atari_slow_irq_26_handler, - [27] = atari_slow_irq_27_handler, - [28] = atari_slow_irq_28_handler, - [29] = atari_slow_irq_29_handler, - [30] = atari_slow_irq_30_handler, - [31] = atari_slow_irq_31_handler -}; - -asmlinkage void atari_fast_irq_handler( void ); -asmlinkage void atari_prio_irq_handler( void ); - -/* Dummy function to allow asm with operands. */ -void atari_fast_prio_irq_dummy (void) { -__asm__ (__ALIGN_STR "\n" -"atari_fast_irq_handler:\n\t" - "orw #0x700,%%sr\n" /* disable all interrupts */ -"atari_prio_irq_handler:\n\t" - "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */ - SAVE_ALL_INT "\n\t" - GET_CURRENT(%%d0) "\n\t" - /* get vector number from stack frame and convert to source */ - "bfextu %%sp@(%c1){#4,#10},%%d0\n\t" - "subw #(0x40-8),%%d0\n\t" - "jpl 1f\n\t" - "addw #(0x40-8-0x18),%%d0\n" - "1:\tlea %a0,%%a0\n\t" - "addql #1,%%a0@(%%d0:l:4)\n\t" - "lea irq_handler,%%a0\n\t" - "lea %%a0@(%%d0:l:8),%%a0\n\t" - "pea %%sp@\n\t" /* push frame address */ - "movel %%a0@(4),%%sp@-\n\t" /* push handler data */ - "movel %%d0,%%sp@-\n\t" /* push int number */ - "movel %%a0@,%%a0\n\t" - "jsr %%a0@\n\t" /* and call the handler */ - "addql #8,%%sp\n\t" - "addql #4,%%sp\n\t" - "jbra ret_from_interrupt" - : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC), - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) -); - for (;;); -} -#endif - /* * Bitmap for free interrupt vector numbers * (new vectors starting from 0x70 can be allocated by From 92b1bd5f1aa88ce4760c02814bfcbb58ad521984 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 11:11:01 +0200 Subject: [PATCH 221/692] m68k/amiga: Refactor amiints.c - Remove filename in comments, - Reorder functions so we no longer need forward declarations. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 98 +++++++++++++++++++-------------------- 1 file changed, 47 insertions(+), 51 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index e5f3033499e7..c8f9eac121a1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -1,5 +1,5 @@ /* - * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code + * Amiga Linux interrupt handling code * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -16,56 +16,6 @@ #include #include -static void amiga_irq_enable(struct irq_data *data); -static void amiga_irq_disable(struct irq_data *data); -static irqreturn_t ami_int1(int irq, void *dev_id); -static irqreturn_t ami_int3(int irq, void *dev_id); -static irqreturn_t ami_int4(int irq, void *dev_id); -static irqreturn_t ami_int5(int irq, void *dev_id); - -static struct irq_chip amiga_irq_chip = { - .name = "amiga", - .irq_enable = amiga_irq_enable, - .irq_disable = amiga_irq_disable, -}; - -/* - * void amiga_init_IRQ(void) - * - * Parameters: None - * - * Returns: Nothing - * - * This function should be called during kernel startup to initialize - * the amiga IRQ handling routines. - */ - -void __init amiga_init_IRQ(void) -{ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); - - /* turn off PCMCIA interrupts */ - if (AMIGAHW_PRESENT(PCMCIA)) - gayle.inten = GAYLE_IRQ_IDE; - - /* turn off all interrupts and enable the master interrupt bit */ - amiga_custom.intena = 0x7fff; - amiga_custom.intreq = 0x7fff; - amiga_custom.intena = IF_SETCLR | IF_INTEN; - - cia_init_IRQ(&ciaa_base); - cia_init_IRQ(&ciab_base); -} /* * Enable/disable a particular machine specific interrupt source. @@ -84,6 +34,13 @@ static void amiga_irq_disable(struct irq_data *data) amiga_custom.intena = 1 << (data->irq - IRQ_USER); } +static struct irq_chip amiga_irq_chip = { + .name = "amiga", + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, +}; + + /* * The builtin Amiga hardware interrupt handlers. */ @@ -183,3 +140,42 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } + + +/* + * void amiga_init_IRQ(void) + * + * Parameters: None + * + * Returns: Nothing + * + * This function should be called during kernel startup to initialize + * the amiga IRQ handling routines. + */ + +void __init amiga_init_IRQ(void) +{ + if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) + pr_err("Couldn't register int%d\n", 1); + if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) + pr_err("Couldn't register int%d\n", 3); + if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) + pr_err("Couldn't register int%d\n", 4); + if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) + pr_err("Couldn't register int%d\n", 5); + + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + /* turn off PCMCIA interrupts */ + if (AMIGAHW_PRESENT(PCMCIA)) + gayle.inten = GAYLE_IRQ_IDE; + + /* turn off all interrupts and enable the master interrupt bit */ + amiga_custom.intena = 0x7fff; + amiga_custom.intreq = 0x7fff; + amiga_custom.intena = IF_SETCLR | IF_INTEN; + + cia_init_IRQ(&ciaa_base); + cia_init_IRQ(&ciab_base); +} From 978ef7e6d0e02083e4a62ab4411922bdeffa36a4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 22:08:28 +0200 Subject: [PATCH 222/692] m68k/amiga: Convert Amiga to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/amiga/amiints.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9d60f4004076..9000921385aa 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !AMIGA depends on !MAC depends on !APOLLO depends on !MVME147 diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c8f9eac121a1..c3da5342f495 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,6 +9,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include From fb1b646aa3bcae2f8211136a6b40228c7c9d236c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:49:18 +0200 Subject: [PATCH 223/692] m68k/amiga: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 104 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c3da5342f495..a8da47126584 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -48,6 +48,99 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void ami_int1(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial transmit buffer empty, interrupt */ + if (ints & IF_TBE) { + amiga_custom.intreq = IF_TBE; + generic_handle_irq(IRQ_AMIGA_TBE); + } + + /* if floppy disk transfer complete, interrupt */ + if (ints & IF_DSKBLK) { + amiga_custom.intreq = IF_DSKBLK; + generic_handle_irq(IRQ_AMIGA_DSKBLK); + } + + /* if software interrupt set, interrupt */ + if (ints & IF_SOFT) { + amiga_custom.intreq = IF_SOFT; + generic_handle_irq(IRQ_AMIGA_SOFT); + } +} + +static void ami_int3(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if a blitter interrupt */ + if (ints & IF_BLIT) { + amiga_custom.intreq = IF_BLIT; + generic_handle_irq(IRQ_AMIGA_BLIT); + } + + /* if a copper interrupt */ + if (ints & IF_COPER) { + amiga_custom.intreq = IF_COPER; + generic_handle_irq(IRQ_AMIGA_COPPER); + } + + /* if a vertical blank interrupt */ + if (ints & IF_VERTB) { + amiga_custom.intreq = IF_VERTB; + generic_handle_irq(IRQ_AMIGA_VERTB); + } +} + +static void ami_int4(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if audio 0 interrupt */ + if (ints & IF_AUD0) { + amiga_custom.intreq = IF_AUD0; + generic_handle_irq(IRQ_AMIGA_AUD0); + } + + /* if audio 1 interrupt */ + if (ints & IF_AUD1) { + amiga_custom.intreq = IF_AUD1; + generic_handle_irq(IRQ_AMIGA_AUD1); + } + + /* if audio 2 interrupt */ + if (ints & IF_AUD2) { + amiga_custom.intreq = IF_AUD2; + generic_handle_irq(IRQ_AMIGA_AUD2); + } + + /* if audio 3 interrupt */ + if (ints & IF_AUD3) { + amiga_custom.intreq = IF_AUD3; + generic_handle_irq(IRQ_AMIGA_AUD3); + } +} + +static void ami_int5(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial receive buffer full interrupt */ + if (ints & IF_RBF) { + /* acknowledge of IF_RBF must be done by the serial interrupt */ + generic_handle_irq(IRQ_AMIGA_RBF); + } + + /* if a disk sync interrupt */ + if (ints & IF_DSKSYN) { + amiga_custom.intreq = IF_DSKSYN; + generic_handle_irq(IRQ_AMIGA_DSKSYN); + } +} +#else /* !CONFIG_GENERIC_HARDIRQS */ static irqreturn_t ami_int1(int irq, void *dev_id) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -143,6 +236,7 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -158,6 +252,15 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + irq_set_chained_handler(IRQ_AUTO_1, ami_int1); + irq_set_chained_handler(IRQ_AUTO_3, ami_int3); + irq_set_chained_handler(IRQ_AUTO_4, ami_int4); + irq_set_chained_handler(IRQ_AUTO_5, ami_int5); +#else /* !CONFIG_GENERIC_HARDIRQS */ if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) pr_err("Couldn't register int%d\n", 1); if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) @@ -169,6 +272,7 @@ void __init amiga_init_IRQ(void) m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) From ddc7fd25d09678f8252c0321ef4b66e8451abe7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 21:48:30 +0200 Subject: [PATCH 224/692] m68k/mac: Convert Mac to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/mac/baboon.c | 3 +++ arch/m68k/mac/oss.c | 3 +++ arch/m68k/mac/psc.c | 3 +++ arch/m68k/mac/via.c | 3 +++ 5 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9000921385aa..9ba1a89e0032 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !MAC depends on !APOLLO depends on !MVME147 depends on !MVME16x diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index f264791b8694..ff11746b0621 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,6 +11,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index 1eb60f071007..ed952704e6ee 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,6 +19,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 26c2b6595808..0a34b7afc376 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,6 +18,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index af9ed33bec14..bde156caa46d 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,6 +28,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include From 9145db564eae98134de8eb8d64b47d7177eccfdd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Aug 2011 12:48:29 +0200 Subject: [PATCH 225/692] m68k/mac: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/mac/baboon.c | 38 +++++++++++ arch/m68k/mac/oss.c | 106 ++++++++++++++++++++++++------ arch/m68k/mac/psc.c | 78 ++++++++++++++++------ arch/m68k/mac/via.c | 143 +++++++++++++++++++++++++++++++++-------- 4 files changed, 300 insertions(+), 65 deletions(-) diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index ff11746b0621..425144cbfa7d 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -56,6 +56,39 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void baboon_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_bit, irq_num; + unsigned char events; + +#ifdef DEBUG_IRQS + printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", + (uint) baboon->mb_control, (uint) baboon->mb_ifr, + (uint) baboon->mb_status); +#endif + + events = baboon->mb_ifr & 0x07; + if (!events) + return; + + irq_num = IRQ_BABOON_0; + irq_bit = 1; + do { + if (events & irq_bit) { + baboon->mb_ifr &= ~irq_bit; + generic_handle_irq(irq_num); + } + irq_bit <<= 1; + irq_num++; + } while(events >= irq_bit); +#if 0 + if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); + /* for now we need to smash all interrupts */ + baboon->mb_ifr &= ~events; +#endif +} +#else static irqreturn_t baboon_irq(int irq, void *dev_id) { int irq_bit, irq_num; @@ -87,6 +120,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) #endif return IRQ_HANDLED; } +#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -95,8 +129,12 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); +#else if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) pr_err("Couldn't register baboon interrupt\n"); +#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ed952704e6ee..cc784c2ff6e8 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -32,10 +32,11 @@ int oss_present; volatile struct mac_oss *oss; -static irqreturn_t oss_irq(int, void *); -static irqreturn_t oss_nubus_irq(int, void *); - +#ifdef CONFIG_GENERIC_HARDIRQS +extern void via1_irq(unsigned int irq, struct irq_desc *desc); +#else extern irqreturn_t via1_irq(int, void *); +#endif /* * Initialize the OSS @@ -62,23 +63,6 @@ void __init oss_init(void) oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } -/* - * Register the OSS and NuBus interrupt dispatchers. - */ - -void __init oss_register_interrupts(void) -{ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -} - /* * Initialize OSS for Nubus access */ @@ -92,6 +76,34 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_irq(unsigned int irq, struct irq_desc *desc) +{ + int events; + + events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); + if (!events) + return; + +#ifdef DEBUG_IRQS + if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { + printk("oss_irq: irq %u events = 0x%04X\n", irq, + (int) oss->irq_pending); + } +#endif + /* FIXME: how do you clear a pending IRQ? */ + + if (events & OSS_IP_SOUND) { + oss->irq_pending &= ~OSS_IP_SOUND; + /* FIXME: call sound handler */ + } else if (events & OSS_IP_SCSI) { + oss->irq_pending &= ~OSS_IP_SCSI; + generic_handle_irq(IRQ_MAC_SCSI); + } else { + /* FIXME: error check here? */ + } +} +#else static irqreturn_t oss_irq(int irq, void *dev_id) { int events; @@ -119,6 +131,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* * Nubus IRQ handler, OSS style @@ -126,6 +139,34 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int events, irq_bit, i; + + events = oss->irq_pending & OSS_IP_NUBUS; + if (!events) + return; + +#ifdef DEBUG_NUBUS_INT + if (console_loglevel > 7) { + printk("oss_nubus_irq: events = 0x%04X\n", events); + } +#endif + /* There are only six slots on the OSS, not seven */ + + i = 6; + irq_bit = 0x40; + do { + --i; + irq_bit >>= 1; + if (events & irq_bit) { + oss->irq_pending &= ~irq_bit; + generic_handle_irq(NUBUS_SOURCE_BASE + i); + } + } while(events & (irq_bit - 1)); +} +#else static irqreturn_t oss_nubus_irq(int irq, void *dev_id) { int events, irq_bit, i; @@ -153,6 +194,31 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) } while(events & (irq_bit - 1)); return IRQ_HANDLED; } +#endif + +/* + * Register the OSS and NuBus interrupt dispatchers. + */ + +void __init oss_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "scsi"); + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "nubus"); + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "sound"); + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} /* * Enable an OSS interrupt diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 0a34b7afc376..52840b8c03b8 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -33,8 +33,6 @@ int psc_present; volatile __u8 *psc; -irqreturn_t psc_irq(int, void *); - /* * Debugging dump, used in various places to see what's going on. */ @@ -114,27 +112,41 @@ void __init psc_init(void) } } -/* - * Register the PSC interrupt dispatchers for autovector interrupts 3-6. - */ - -void __init psc_register_interrupts(void) -{ - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -} - /* * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -irqreturn_t psc_irq(int irq, void *dev_id) +#ifdef CONFIG_GENERIC_HARDIRQS +static void psc_irq(unsigned int irq, struct irq_desc *desc) +{ + unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); + int pIFR = pIFRbase + offset; + int pIER = pIERbase + offset; + int irq_num; + unsigned char irq_bit, events; + +#ifdef DEBUG_IRQS + printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n", + irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); +#endif + + events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; + if (!events) + return; + + irq_num = irq << 3; + irq_bit = 1; + do { + if (events & irq_bit) { + psc_write_byte(pIFR, irq_bit); + generic_handle_irq(irq_num); + } + irq_num++; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else +static irqreturn_t psc_irq(int irq, void *dev_id) { int pIFR = pIFRbase + ((int) dev_id); int pIER = pIERbase + ((int) dev_id); @@ -162,6 +174,34 @@ irqreturn_t psc_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif + +/* + * Register the PSC interrupt dispatchers for autovector interrupts 3-6. + */ + +void __init psc_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_AUTO_3, psc_irq); + irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); + irq_set_chained_handler(IRQ_AUTO_4, psc_irq); + irq_set_handler_data(IRQ_AUTO_4, (void *)0x40); + irq_set_chained_handler(IRQ_AUTO_5, psc_irq); + irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); + irq_set_chained_handler(IRQ_AUTO_6, psc_irq); + irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) + pr_err("Couldn't register psc%d interrupt\n", 3); + if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) + pr_err("Couldn't register psc%d interrupt\n", 4); + if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) + pr_err("Couldn't register psc%d interrupt\n", 5); + if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) + pr_err("Couldn't register psc%d interrupt\n", 6); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} void psc_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index bde156caa46d..b8156ac496a0 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -80,9 +80,6 @@ static int gIER,gIFR,gBufA,gBufB; static u8 nubus_disabled; void via_debug_dump(void); -irqreturn_t via1_irq(int, void *); -irqreturn_t via2_irq(int, void *); -irqreturn_t via_nubus_irq(int, void *); void via_irq_enable(int irq); void via_irq_disable(int irq); void via_irq_clear(int irq); @@ -288,29 +285,6 @@ void __init via_init_clock(irq_handler_t func) pr_err("Couldn't register %s interrupt\n", "timer"); } -/* - * Register the interrupt dispatchers for VIA or RBV machines only. - */ - -void __init via_register_interrupts(void) -{ - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -} - /* * Debugging dump, used in various places to see what's going on. */ @@ -443,6 +417,49 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via1_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via1[vIFR] & via1[vIER] & 0x7F; + if (!events) + return; + + irq_num = VIA1_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via1[vIFR] = irq_bit; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} + +static void via2_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via2[gIFR] & via2[gIER] & 0x7F; + if (!events) + return; + + irq_num = VIA2_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via2[gIFR] = irq_bit | rbv_clear; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else irqreturn_t via1_irq(int irq, void *dev_id) { int irq_num; @@ -486,12 +503,49 @@ irqreturn_t via2_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int slot_irq; + unsigned char slot_bit, events; + + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + if (!events) + return; + + do { + slot_irq = IRQ_NUBUS_F; + slot_bit = 0x40; + do { + if (events & slot_bit) { + events &= ~slot_bit; + generic_handle_irq(slot_irq); + } + --slot_irq; + slot_bit >>= 1; + } while (events); + + /* clear the CA1 interrupt and make certain there's no more. */ + via2[gIFR] = 0x02 | rbv_clear; + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + } while (events); +} +#else irqreturn_t via_nubus_irq(int irq, void *dev_id) { int slot_irq; @@ -527,6 +581,43 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) } while (events); return IRQ_HANDLED; } +#endif + +/* + * Register the interrupt dispatchers for VIA or RBV machines only. + */ + +void __init via_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + if (via_alt_mapping) { + /* software interrupt */ + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + /* via1 interrupt */ + irq_set_chained_handler(IRQ_AUTO_6, via1_irq); + } else { + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + } + irq_set_chained_handler(IRQ_AUTO_2, via2_irq); + irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); +#else + if (via_alt_mapping) { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "software"); + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } else { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "via2"); + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "nubus"); +#endif +} void via_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); From efaf6d28fc768bfa373f7377c4b0484cbdf9f67e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:02:22 +0200 Subject: [PATCH 226/692] m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq Signed-off-by: Geert Uytterhoeven Cc: Philip Blundell --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9ba1a89e0032..e4bd0c974643 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -91,7 +91,6 @@ config USE_GENERIC_HARDIRQS depends on !MVME147 depends on !MVME16x depends on !BVME6000 - depends on !HP300 depends on !SUN3X depends on !Q40 depends on !SUN3 From 6c490c4da4642ec9e7569c8b50a98a22c71ad184 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:11:00 +0200 Subject: [PATCH 227/692] m68k/vme: Convert VME to genirq Signed-off-by: Geert Uytterhoeven Cc: Richard Hirst --- arch/m68k/Kconfig | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index e4bd0c974643..8ae37a8fba40 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,9 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !APOLLO - depends on !MVME147 - depends on !MVME16x - depends on !BVME6000 depends on !SUN3X depends on !Q40 depends on !SUN3 From bc7485acd09405d9544783d773ee040af4a5c861 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:45:57 +0200 Subject: [PATCH 228/692] m68k/apollo: Convert Apollo to genirq Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven Cc: Peter De Schrijver --- arch/m68k/Kconfig | 1 - arch/m68k/apollo/dn_ints.c | 25 +++++++++++++++++++++++-- 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 8ae37a8fba40..f2dc708d3da9 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !APOLLO depends on !SUN3X depends on !Q40 depends on !SUN3 diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 4b764312aed0..fc190b34b621 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,9 +1,14 @@ #include - +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else #include +#endif + #include #include +#ifndef CONFIG_GENERIC_HARDIRQS void dn_process_int(unsigned int irq, struct pt_regs *fp) { do_IRQ(irq, fp); @@ -11,6 +16,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; } +#endif unsigned int apollo_irq_startup(struct irq_data *data) { @@ -33,16 +39,31 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } +#ifdef CONFIG_GENERIC_HARDIRQS +void apollo_irq_eoi(struct irq_data *data) +{ + *(volatile unsigned char *)(pica) = 0x20; + *(volatile unsigned char *)(picb) = 0x20; +} +#endif + static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_eoi = apollo_irq_eoi, +#endif }; void __init dn_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); +#else m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, +#endif + m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } From 4045513286462a3c12140fac0559f09bcb5e7f10 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 22:46:01 +0200 Subject: [PATCH 229/692] m68k/sun3: Use the kstat_irqs_cpu() wrapper Signed-off-by: Geert Uytterhoeven Acked-by: Sam Creasey --- arch/m68k/sun3/sun3ints.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20ffee7dc319..1273eb879a15 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -51,14 +51,19 @@ void sun3_disable_irq(unsigned int irq) static irqreturn_t sun3_int7(int irq, void *dev_id) { + unsigned int cnt; + *sun3_intreg |= (1 << irq); - if (!(kstat_cpu(0).irqs[irq] % 2000)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 2000)) + sun3_leds(led_pattern[cnt % 16000 / 2000]); return IRQ_HANDLED; } static irqreturn_t sun3_int5(int irq, void *dev_id) { + unsigned int cnt; + #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -68,8 +73,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #endif xtime_update(1); update_process_times(user_mode(get_irq_regs())); - if (!(kstat_cpu(0).irqs[irq] % 20)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 20)) + sun3_leds(led_pattern[cnt % 160 / 20]); return IRQ_HANDLED; } From dda7535912255015ecf7264c1d6691a09f8ba487 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:46:46 +0200 Subject: [PATCH 230/692] m68k/sun3: Convert Sun3/3x to genirq Replace the custom irq handler that masks the irq and calls do_IRQ(), and the unmasking in the individual handlers, by handle_level_irq(). Signed-off-by: Geert Uytterhoeven Cc: Sam Creasey --- arch/m68k/Kconfig | 2 -- arch/m68k/sun3/sun3ints.c | 16 ++++++++++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index f2dc708d3da9..290f9c838b35 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,9 +87,7 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !SUN3X depends on !Q40 - depends on !SUN3 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 1273eb879a15..626b601931e9 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,7 +53,9 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -67,7 +69,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -85,12 +89,14 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } +#ifndef CONFIG_GENERIC_HARDIRQS static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); do_IRQ(irq, fp); } +#endif static void sun3_irq_enable(struct irq_data *data) { @@ -108,15 +114,21 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_mask = sun3_irq_disable, + .irq_unmask = sun3_irq_enable, +#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; +#ifndef CONFIG_GENERIC_HARDIRQS m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, - IRQ_AUTO_1, 7); +#endif + m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, + 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) From a03010ed9b399fdbc28ac8836e0a6d4b15403f9f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:47:16 +0200 Subject: [PATCH 231/692] m68k/q40: Convert Q40/Q60 to genirq q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15. q40_probe_irq_o{ff,n}() become unused. Signed-off-by: Geert Uytterhoeven Cc: Richard Zidlicky --- arch/m68k/Kconfig | 1 - arch/m68k/include/asm/q40ints.h | 2 ++ arch/m68k/q40/q40ints.c | 8 +++++++- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 290f9c838b35..06198ced2245 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !Q40 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 3d970afb708f..01cdbb4da465 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -25,5 +25,7 @@ #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) +#ifndef CONFIG_GENERIC_HARDIRQS extern unsigned long q40_probe_irq_on (void); extern int q40_probe_irq_off (unsigned long irqs); +#endif diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index afe600c03659..f1e5288f043f 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,10 +15,14 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else +#include +#endif #include #include -#include #include #include @@ -326,6 +330,7 @@ void q40_irq_disable(struct irq_data *data) } } +#ifndef CONFIG_GENERIC_HARDIRQS unsigned long q40_probe_irq_on(void) { printk("irq probing not working - reconfigure the driver to avoid this\n"); @@ -335,3 +340,4 @@ int q40_probe_irq_off(unsigned long irqs) { return -1; } +#endif From d890d73995257b4e10cdd7d55bad80e34a71ba22 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:28:04 +0200 Subject: [PATCH 232/692] m68k/irq: Remove obsolete m68k irq framework Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 10 +- arch/m68k/amiga/amiints.c | 114 ------------ arch/m68k/apollo/dn_ints.c | 22 --- arch/m68k/include/asm/irq.h | 63 ------- arch/m68k/include/asm/q40ints.h | 5 - arch/m68k/kernel/Makefile | 10 +- arch/m68k/kernel/ints.c | 297 -------------------------------- arch/m68k/mac/baboon.c | 41 ----- arch/m68k/mac/oss.c | 78 --------- arch/m68k/mac/psc.c | 44 ----- arch/m68k/mac/via.c | 104 ----------- arch/m68k/q40/q40ints.c | 16 -- arch/m68k/sun3/sun3ints.c | 20 --- 13 files changed, 4 insertions(+), 820 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 06198ced2245..361d54019bb0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -4,8 +4,8 @@ config M68K select HAVE_IDE select HAVE_AOUT if MMU select GENERIC_ATOMIC64 if MMU - select HAVE_GENERIC_HARDIRQS if !MMU - select GENERIC_IRQ_SHOW if !MMU + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS config RWSEM_GENERIC_SPINLOCK @@ -84,12 +84,6 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA -config USE_GENERIC_HARDIRQS - bool "Use genirq" - depends on MMU - select HAVE_GENERIC_HARDIRQS - select GENERIC_IRQ_SHOW - menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index a8da47126584..47b5f90002ab 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,9 +9,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -48,7 +46,6 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void ami_int1(unsigned int irq, struct irq_desc *desc) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -140,103 +137,6 @@ static void ami_int5(unsigned int irq, struct irq_desc *desc) generic_handle_irq(IRQ_AMIGA_DSKSYN); } } -#else /* !CONFIG_GENERIC_HARDIRQS */ -static irqreturn_t ami_int1(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial transmit buffer empty, interrupt */ - if (ints & IF_TBE) { - amiga_custom.intreq = IF_TBE; - generic_handle_irq(IRQ_AMIGA_TBE); - } - - /* if floppy disk transfer complete, interrupt */ - if (ints & IF_DSKBLK) { - amiga_custom.intreq = IF_DSKBLK; - generic_handle_irq(IRQ_AMIGA_DSKBLK); - } - - /* if software interrupt set, interrupt */ - if (ints & IF_SOFT) { - amiga_custom.intreq = IF_SOFT; - generic_handle_irq(IRQ_AMIGA_SOFT); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int3(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if a blitter interrupt */ - if (ints & IF_BLIT) { - amiga_custom.intreq = IF_BLIT; - generic_handle_irq(IRQ_AMIGA_BLIT); - } - - /* if a copper interrupt */ - if (ints & IF_COPER) { - amiga_custom.intreq = IF_COPER; - generic_handle_irq(IRQ_AMIGA_COPPER); - } - - /* if a vertical blank interrupt */ - if (ints & IF_VERTB) { - amiga_custom.intreq = IF_VERTB; - generic_handle_irq(IRQ_AMIGA_VERTB); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int4(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if audio 0 interrupt */ - if (ints & IF_AUD0) { - amiga_custom.intreq = IF_AUD0; - generic_handle_irq(IRQ_AMIGA_AUD0); - } - - /* if audio 1 interrupt */ - if (ints & IF_AUD1) { - amiga_custom.intreq = IF_AUD1; - generic_handle_irq(IRQ_AMIGA_AUD1); - } - - /* if audio 2 interrupt */ - if (ints & IF_AUD2) { - amiga_custom.intreq = IF_AUD2; - generic_handle_irq(IRQ_AMIGA_AUD2); - } - - /* if audio 3 interrupt */ - if (ints & IF_AUD3) { - amiga_custom.intreq = IF_AUD3; - generic_handle_irq(IRQ_AMIGA_AUD3); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int5(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial receive buffer full interrupt */ - if (ints & IF_RBF) { - /* acknowledge of IF_RBF must be done by the serial interrupt */ - generic_handle_irq(IRQ_AMIGA_RBF); - } - - /* if a disk sync interrupt */ - if (ints & IF_DSKSYN) { - amiga_custom.intreq = IF_DSKSYN; - generic_handle_irq(IRQ_AMIGA_DSKSYN); - } - return IRQ_HANDLED; -} -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -252,7 +152,6 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); @@ -260,19 +159,6 @@ void __init amiga_init_IRQ(void) irq_set_chained_handler(IRQ_AUTO_3, ami_int3); irq_set_chained_handler(IRQ_AUTO_4, ami_int4); irq_set_chained_handler(IRQ_AUTO_5, ami_int5); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index fc190b34b621..b7d0aa37d199 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,23 +1,9 @@ #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include -#ifndef CONFIG_GENERIC_HARDIRQS -void dn_process_int(unsigned int irq, struct pt_regs *fp) -{ - do_IRQ(irq, fp); - - *(volatile unsigned char *)(pica)=0x20; - *(volatile unsigned char *)(picb)=0x20; -} -#endif - unsigned int apollo_irq_startup(struct irq_data *data) { unsigned int irq = data->irq; @@ -39,31 +25,23 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -#ifdef CONFIG_GENERIC_HARDIRQS void apollo_irq_eoi(struct irq_data *data) { *(volatile unsigned char *)(pica) = 0x20; *(volatile unsigned char *)(picb) = 0x20; } -#endif static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_eoi = apollo_irq_eoi, -#endif }; void __init dn_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); -#else - m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); -#endif m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 518e61f2fccb..94349a525bc2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -62,67 +62,6 @@ #define IRQ_FLG_STD (0x8000) /* internally used */ #endif -#ifndef CONFIG_GENERIC_HARDIRQS - -#include -#include -#include -#include - -struct pt_regs; - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -struct irq_data { - unsigned int irq; - irqreturn_t (*handler)(int, void *); - void *dev_id; - struct irq_data *next; - unsigned long flags; - const char *devname; -}; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_chip { - const char *name; - unsigned int (*irq_startup)(struct irq_data *data); - void (*irq_shutdown)(struct irq_data *data); - void (*irq_enable)(struct irq_data *data); - void (*irq_disable)(struct irq_data *data); -}; - -extern unsigned int m68k_irq_startup(struct irq_data *data); -extern unsigned int m68k_irq_startup_irq(unsigned int irq); -extern void m68k_irq_shutdown(struct irq_data *data); - -/* - * This function returns a new struct irq_data - */ -extern struct irq_data *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); -#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ - m68k_setup_irq_chip((chip), (irq), (cnt)) - -extern void generic_handle_irq(unsigned int); -asmlinkage void do_IRQ(int irq, struct pt_regs *regs); - -#else /* CONFIG_GENERIC_HARDIRQS */ - struct irq_data; struct irq_chip; struct irq_desc; @@ -139,8 +78,6 @@ extern void m68k_setup_irq_controller(struct irq_chip *, struct irq_desc *desc), unsigned int irq, unsigned int cnt); -#endif /* CONFIG_GENERIC_HARDIRQS */ - extern unsigned int irq_canonicalize(unsigned int irq); #else diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 01cdbb4da465..22f12c9eb910 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -24,8 +24,3 @@ #define Q40_IRQ10_MASK (1<<5) #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) - -#ifndef CONFIG_GENERIC_HARDIRQS -extern unsigned long q40_probe_irq_on (void); -extern int q40_probe_irq_off (unsigned long irqs); -#endif diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 141425785c4e..c5696193281a 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -6,11 +6,10 @@ extra-$(CONFIG_MMU) := head.o extra-$(CONFIG_SUN3) := sun3-head.o extra-y += vmlinux.lds -obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ - sys_m68k.o syscalltable.o time.o traps.o +obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \ + signal.o sys_m68k.o syscalltable.o time.o traps.o obj-$(CONFIG_MMU) += ints.o vectors.o -devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o @@ -18,9 +17,4 @@ endif ifndef CONFIG_MMU obj-y += init_task.o endif -ifdef CONFIG_GENERIC_HARDIRQS -obj-y += irq.o -else -obj-y += devres.o -endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index cea439f9819b..e2b056b3a314 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,20 +31,6 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; -#ifndef CONFIG_GENERIC_HARDIRQS -/* table for system interrupt handlers */ -static struct irq_data *irq_list[NR_IRQS]; -static struct irq_chip *irq_chip[NR_IRQS]; -static int irq_depth[NR_IRQS]; - -static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) -{ - irq_chip[irq] = chip; - return 0; -} -#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) -#endif /* !CONFIG_GENERIC_HARDIRQS */ - static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -59,11 +45,6 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; -#ifndef CONFIG_GENERIC_HARDIRQS -#define NUM_IRQ_NODES 100 -static struct irq_data nodes[NUM_IRQ_NODES]; -#endif /* !CONFIG_GENERIC_HARDIRQS */ - /* * void init_IRQ(void) * @@ -133,8 +114,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } -#ifdef CONFIG_GENERIC_HARDIRQS - /** * m68k_setup_irq_controller * @chip: irq chip which controls specified irq @@ -160,198 +139,6 @@ void m68k_setup_irq_controller(struct irq_chip *chip, } } -#else /* !CONFIG_GENERIC_HARDIRQS */ - -/** - * m68k_setup_irq_chip - * @contr: irq controller which controls specified irq - * @irq: first irq to be managed by the controller - * - * Change the controller for the specified range of irq, which will be used to - * manage these irq. auto/user irq already have a default controller, which can - * be changed as well, but the controller probably should use m68k_irq_startup/ - * m68k_irq_shutdown. - */ -void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, - unsigned int cnt) -{ - int i; - - for (i = 0; i < cnt; i++) - irq_set_chip(irq + i, contr); -} - -struct irq_data *new_irq_node(void) -{ - struct irq_data *node; - short i; - - for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { - if (!node->handler) { - memset(node, 0, sizeof(*node)); - return node; - } - } - - printk ("new_irq_node: out of nodes\n"); - return NULL; -} - -static int m68k_setup_irq(unsigned int irq, struct irq_data *node) -{ - struct irq_chip *contr; - struct irq_data **prev; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d from %s\n", - __func__, irq, node->devname); - return -ENXIO; - } - - local_irq_save(flags); - - prev = irq_list + irq; - if (*prev) { - /* Can't share interrupts unless both agree to */ - if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - local_irq_restore(flags); - return -EBUSY; - } - while (*prev) - prev = &(*prev)->next; - } - - if (!irq_list[irq]) { - if (contr->irq_startup) - contr->irq_startup(node); - else - contr->irq_enable(node); - } - node->next = NULL; - *prev = node; - - local_irq_restore(flags); - - return 0; -} - -int request_irq(unsigned int irq, - irq_handler_t handler, - unsigned long flags, const char *devname, void *dev_id) -{ - struct irq_data *node; - int res; - - node = new_irq_node(); - if (!node) - return -ENOMEM; - - node->irq = irq; - node->handler = handler; - node->flags = flags; - node->dev_id = dev_id; - node->devname = devname; - - res = m68k_setup_irq(irq, node); - if (res) - node->handler = NULL; - - return res; -} - -EXPORT_SYMBOL(request_irq); - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irq_chip *contr; - struct irq_data **p, *node; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", __func__, irq); - return; - } - - local_irq_save(flags); - - p = irq_list + irq; - while ((node = *p)) { - if (node->dev_id == dev_id) - break; - p = &node->next; - } - - if (node) { - *p = node->next; - node->handler = NULL; - } else - printk("%s: Removing probably wrong IRQ %d\n", - __func__, irq); - - if (!irq_list[irq]) { - if (contr->irq_shutdown) - contr->irq_shutdown(node); - else - contr->irq_disable(node); - } - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(free_irq); - -void enable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (irq_depth[irq]) { - if (!--irq_depth[irq]) { - if (contr->irq_enable) - contr->irq_enable(irq_list[irq]); - } - } else - WARN_ON(1); - local_irq_restore(flags); -} - -EXPORT_SYMBOL(enable_irq); - -void disable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (!irq_depth[irq]++) { - if (contr->irq_disable) - contr->irq_disable(irq_list[irq]); - } - local_irq_restore(flags); -} - -EXPORT_SYMBOL(disable_irq); - -void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); - -EXPORT_SYMBOL(disable_irq_nosync); - -#endif /* !CONFIG_GENERIC_HARDIRQS */ - unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -377,36 +164,6 @@ void m68k_irq_shutdown(struct irq_data *data) } -#ifndef CONFIG_GENERIC_HARDIRQS - -/* - * Do we need these probe functions on the m68k? - * - * ... may be useful with ISA devices - */ -unsigned long probe_irq_on (void) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_on(); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_on); - -int probe_irq_off (unsigned long irqs) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_off(irqs); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_off); -#endif /* CONFIG_GENERIC_HARDIRQS */ - unsigned int irq_canonicalize(unsigned int irq) { #ifdef CONFIG_Q40 @@ -418,63 +175,9 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -#ifndef CONFIG_GENERIC_HARDIRQS -void generic_handle_irq(unsigned int irq) -{ - struct irq_data *node; - kstat_cpu(0).irqs[irq]++; - node = irq_list[irq]; - do { - node->handler(irq, node->dev_id); - node = node->next; - } while (node); -} - -asmlinkage void do_IRQ(int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - generic_handle_irq(irq); - set_irq_regs(old_regs); -} - -asmlinkage void handle_badint(struct pt_regs *regs) -{ - kstat_cpu(0).irqs[0]++; - printk("unexpected interrupt from %u\n", regs->vector); -} - -int show_interrupts(struct seq_file *p, void *v) -{ - struct irq_chip *contr; - struct irq_data *node; - int i = *(loff_t *) v; - - /* autovector interrupts */ - if (irq_list[i]) { - contr = irq_chip[i]; - node = irq_list[i]; - seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); - while ((node = node->next)) - seq_printf(p, ", %s", node->devname); - seq_puts(p, "\n"); - } - return 0; -} - -#ifdef CONFIG_PROC_FS -void init_irq_proc(void) -{ - /* Insert /proc/irq driver here */ -} -#endif - -#else /* CONFIG_GENERIC_HARDIRQS */ asmlinkage void handle_badint(struct pt_regs *regs) { atomic_inc(&irq_err_count); pr_warn("unexpected interrupt from %u\n", regs->vector); } - -#endif /* CONFIG_GENERIC_HARDIRQS */ diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 425144cbfa7d..b55ead284971 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,9 +11,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -56,7 +54,6 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void baboon_irq(unsigned int irq, struct irq_desc *desc) { int irq_bit, irq_num; @@ -88,39 +85,6 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) baboon->mb_ifr &= ~events; #endif } -#else -static irqreturn_t baboon_irq(int irq, void *dev_id) -{ - int irq_bit, irq_num; - unsigned char events; - -#ifdef DEBUG_IRQS - printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", - (uint) baboon->mb_control, (uint) baboon->mb_ifr, - (uint) baboon->mb_status); -#endif - - if (!(events = baboon->mb_ifr & 0x07)) - return IRQ_NONE; - - irq_num = IRQ_BABOON_0; - irq_bit = 1; - do { - if (events & irq_bit) { - baboon->mb_ifr &= ~irq_bit; - generic_handle_irq(irq_num); - } - irq_bit <<= 1; - irq_num++; - } while(events >= irq_bit); -#if 0 - if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); - /* for now we need to smash all interrupts */ - baboon->mb_ifr &= ~events; -#endif - return IRQ_HANDLED; -} -#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -129,12 +93,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); -#else - if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) - pr_err("Couldn't register baboon interrupt\n"); -#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index cc784c2ff6e8..a4c82dab9ff1 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,9 +19,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -32,11 +30,7 @@ int oss_present; volatile struct mac_oss *oss; -#ifdef CONFIG_GENERIC_HARDIRQS extern void via1_irq(unsigned int irq, struct irq_desc *desc); -#else -extern irqreturn_t via1_irq(int, void *); -#endif /* * Initialize the OSS @@ -76,7 +70,6 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_irq(unsigned int irq, struct irq_desc *desc) { int events; @@ -103,35 +96,6 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) /* FIXME: error check here? */ } } -#else -static irqreturn_t oss_irq(int irq, void *dev_id) -{ - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_IRQS - if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { - printk("oss_irq: irq %d events = 0x%04X\n", irq, - (int) oss->irq_pending); - } -#endif - /* FIXME: how do you clear a pending IRQ? */ - - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { - oss->irq_pending &= ~OSS_IP_SCSI; - generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ - } - return IRQ_HANDLED; -} -#endif /* * Nubus IRQ handler, OSS style @@ -139,7 +103,6 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) { int events, irq_bit, i; @@ -166,35 +129,6 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) } } while(events & (irq_bit - 1)); } -#else -static irqreturn_t oss_nubus_irq(int irq, void *dev_id) -{ - int events, irq_bit, i; - - events = oss->irq_pending & OSS_IP_NUBUS; - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_NUBUS_INT - if (console_loglevel > 7) { - printk("oss_nubus_irq: events = 0x%04X\n", events); - } -#endif - /* There are only six slots on the OSS, not seven */ - - i = 6; - irq_bit = 0x40; - do { - --i; - irq_bit >>= 1; - if (events & irq_bit) { - oss->irq_pending &= ~irq_bit; - generic_handle_irq(NUBUS_SOURCE_BASE + i); - } - } while(events & (irq_bit - 1)); - return IRQ_HANDLED; -} -#endif /* * Register the OSS and NuBus interrupt dispatchers. @@ -202,22 +136,10 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) void __init oss_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } /* diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 52840b8c03b8..e6c2d20f328d 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,9 +18,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -116,7 +114,6 @@ void __init psc_init(void) * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void psc_irq(unsigned int irq, struct irq_desc *desc) { unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); @@ -145,36 +142,6 @@ static void psc_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -static irqreturn_t psc_irq(int irq, void *dev_id) -{ - int pIFR = pIFRbase + ((int) dev_id); - int pIER = pIERbase + ((int) dev_id); - int irq_num; - unsigned char irq_bit, events; - -#ifdef DEBUG_IRQS - printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n", - irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); -#endif - - events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; - if (!events) - return IRQ_NONE; - - irq_num = irq << 3; - irq_bit = 1; - do { - if (events & irq_bit) { - psc_write_byte(pIFR, irq_bit); - generic_handle_irq(irq_num); - } - irq_num++; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Register the PSC interrupt dispatchers for autovector interrupts 3-6. @@ -182,7 +149,6 @@ static irqreturn_t psc_irq(int irq, void *dev_id) void __init psc_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_AUTO_3, psc_irq); irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); irq_set_chained_handler(IRQ_AUTO_4, psc_irq); @@ -191,16 +157,6 @@ void __init psc_register_interrupts(void) irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); irq_set_chained_handler(IRQ_AUTO_6, psc_irq); irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } void psc_irq_enable(int irq) { diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index b8156ac496a0..f1600ad26621 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,9 +28,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -417,7 +415,6 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via1_irq(unsigned int irq, struct irq_desc *desc) { int irq_num; @@ -459,58 +456,12 @@ static void via2_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -irqreturn_t via1_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via1[vIFR] & via1[vIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA1_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via1[vIFR] = irq_bit; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} - -irqreturn_t via2_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via2[gIFR] & via2[gIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA2_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via2[gIFR] = irq_bit | rbv_clear; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via_nubus_irq(unsigned int irq, struct irq_desc *desc) { int slot_irq; @@ -545,43 +496,6 @@ void via_nubus_irq(unsigned int irq, struct irq_desc *desc) events &= ~via2[vDirA]; } while (events); } -#else -irqreturn_t via_nubus_irq(int irq, void *dev_id) -{ - int slot_irq; - unsigned char slot_bit, events; - - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - if (!events) - return IRQ_NONE; - - do { - slot_irq = IRQ_NUBUS_F; - slot_bit = 0x40; - do { - if (events & slot_bit) { - events &= ~slot_bit; - generic_handle_irq(slot_irq); - } - --slot_irq; - slot_bit >>= 1; - } while (events); - - /* clear the CA1 interrupt and make certain there's no more. */ - via2[gIFR] = 0x02 | rbv_clear; - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - } while (events); - return IRQ_HANDLED; -} -#endif /* * Register the interrupt dispatchers for VIA or RBV machines only. @@ -589,7 +503,6 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) void __init via_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS if (via_alt_mapping) { /* software interrupt */ irq_set_chained_handler(IRQ_AUTO_1, via1_irq); @@ -600,23 +513,6 @@ void __init via_register_interrupts(void) } irq_set_chained_handler(IRQ_AUTO_2, via2_irq); irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); -#else - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -#endif } void via_irq_enable(int irq) { diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index f1e5288f043f..2b888491f29a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,11 +15,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include @@ -329,15 +325,3 @@ void q40_irq_disable(struct irq_data *data) printk("disable_irq nesting count %d\n",mext_disabled); } } - -#ifndef CONFIG_GENERIC_HARDIRQS -unsigned long q40_probe_irq_on(void) -{ - printk("irq probing not working - reconfigure the driver to avoid this\n"); - return -1; -} -int q40_probe_irq_off(unsigned long irqs) -{ - return -1; -} -#endif diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 626b601931e9..7eb378195cf7 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,9 +53,6 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -69,9 +66,6 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -89,15 +83,6 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } -#ifndef CONFIG_GENERIC_HARDIRQS -static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) -{ - *sun3_intreg &= ~(1 << irq); - - do_IRQ(irq, fp); -} -#endif - static void sun3_irq_enable(struct irq_data *data) { sun3_enable_irq(data->irq); @@ -114,19 +99,14 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_mask = sun3_irq_disable, .irq_unmask = sun3_irq_enable, -#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; -#ifndef CONFIG_GENERIC_HARDIRQS - m68k_setup_auto_interrupt(sun3_inthandle); -#endif m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); From f30a6484f1bcb410d0af0c24f34b8e3d92682a05 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:54:50 +0200 Subject: [PATCH 233/692] m68k/irq: Remove obsolete support for user vector interrupt fixups It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/atari/ataints.c | 2 +- arch/m68k/bvme6000/config.c | 2 +- arch/m68k/include/asm/irq.h | 4 +--- arch/m68k/kernel/entry_mm.S | 3 +-- arch/m68k/kernel/ints.c | 11 ++--------- arch/m68k/mvme147/config.c | 2 +- arch/m68k/mvme16x/config.c | 2 +- arch/m68k/sun3/sun3ints.c | 2 +- 9 files changed, 10 insertions(+), 20 deletions(-) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index b7d0aa37d199..17be1e7e2df2 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -41,7 +41,7 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); + m68k_setup_user_interrupt(VEC_USER + 96, 16); m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index af544557dd1d..6d196dadfdbc 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -137,7 +137,7 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); + m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER); m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, NUM_ATARI_SOURCES - 1); diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 1edd95095cb4..81286476f740 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -86,7 +86,7 @@ static void bvme6000_get_model(char *model) */ static void __init bvme6000_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_bvme6000(void) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 94349a525bc2..6198df5ff245 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -70,9 +70,7 @@ extern unsigned int m68k_irq_startup_irq(unsigned int irq); extern void m68k_irq_shutdown(struct irq_data *data); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, - struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt); extern void m68k_setup_irq_controller(struct irq_chip *, void (*handle)(unsigned int irq, struct irq_desc *desc), diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index f5927d0927b4..c713f514843d 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -48,7 +48,7 @@ .globl sys_fork, sys_clone, sys_vfork .globl ret_from_interrupt, bad_interrupt .globl auto_irqhandler_fixup -.globl user_irqvec_fixup, user_irqhandler_fixup +.globl user_irqvec_fixup .text ENTRY(buserr) @@ -240,7 +240,6 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack -user_irqhandler_fixup = . + 2 jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e2b056b3a314..74fefac00899 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -28,7 +28,6 @@ #endif extern u32 auto_irqhandler_fixup[]; -extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; static int m68k_first_user_vec; @@ -91,16 +90,12 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * m68k_setup_user_interrupt * @vec: first user vector interrupt to handle * @cnt: number of active user vector interrupts - * @handler: called from user vector interrupts * * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is - * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default do_IRQ(), it will be called - * with irq numbers starting from IRQ_USER. + * different from auto vector interrupts). */ -void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)) +void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt) { int i; @@ -109,8 +104,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, for (i = 0; i < cnt; i++) irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; - if (handler) - *user_irqhandler_fixup = (u32)handler; flush_icache(); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 01f2adf3f19f..5de924ef42ed 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -81,7 +81,7 @@ static void mvme147_get_model(char *model) void __init mvme147_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_mvme147(void) diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 0b28e2621653..31a66d99cbca 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -117,7 +117,7 @@ static void mvme16x_get_hardware_list(struct seq_file *m) static void __init mvme16x_init_IRQ (void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } #define pcc2chip ((volatile u_char *)0xfff42000) diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 7eb378195cf7..78b60f53e90a 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,7 @@ void __init sun3_init_IRQ(void) m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); - m68k_setup_user_interrupt(VEC_USER, 128, NULL); + m68k_setup_user_interrupt(VEC_USER, 128); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) pr_err("Couldn't register %s interrupt\n", "int5"); From 2690e2148b730c53acb8797821468d0ea1673f25 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 11 Sep 2011 23:40:50 +1000 Subject: [PATCH 234/692] m68k/mac: Remove mac_irq_{en,dis}able() wrappers Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/macintosh.h | 2 ++ arch/m68k/mac/baboon.c | 7 ++----- arch/m68k/mac/macints.c | 25 +++++++------------------ 3 files changed, 11 insertions(+), 23 deletions(-) diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index c2a1c5eac1a6..12ebe43b008b 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -12,6 +12,8 @@ extern void mac_reset(void); extern void mac_poweroff(void); extern void mac_init_IRQ(void); extern int mac_irq_pending(unsigned int); +extern void mac_irq_enable(struct irq_data *data); +extern void mac_irq_disable(struct irq_data *data); /* * Floppy driver magic hook - probably shouldn't be here diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b55ead284971..b403924a1cad 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -21,9 +21,6 @@ /* #define DEBUG_IRQS */ -extern void mac_enable_irq(unsigned int); -extern void mac_disable_irq(unsigned int); - int baboon_present; static volatile struct baboon *baboon; static unsigned char baboon_disabled; @@ -111,7 +108,7 @@ void baboon_irq_enable(int irq) baboon_disabled &= ~(1 << irq_idx); if (!baboon_disabled) - mac_enable_irq(IRQ_NUBUS_C); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) @@ -124,7 +121,7 @@ void baboon_irq_disable(int irq) baboon_disabled |= 1 << irq_idx; if (baboon_disabled) - mac_disable_irq(IRQ_NUBUS_C); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_clear(int irq) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 98497d288a9b..ba220b70ab8c 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -190,19 +190,6 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ -void mac_enable_irq(unsigned int irq); -void mac_disable_irq(unsigned int irq); - -static void mac_irq_enable(struct irq_data *data) -{ - mac_enable_irq(data->irq); -} - -static void mac_irq_disable(struct irq_data *data) -{ - mac_disable_irq(data->irq); -} - static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, @@ -250,16 +237,17 @@ void __init mac_init_IRQ(void) } /* - * mac_enable_irq - enable an interrupt source - * mac_disable_irq - disable an interrupt source + * mac_irq_enable - enable an interrupt source + * mac_irq_disable - disable an interrupt source * mac_clear_irq - clears a pending interrupt - * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending) + * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ -void mac_enable_irq(unsigned int irq) +void mac_irq_enable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { @@ -292,8 +280,9 @@ void mac_enable_irq(unsigned int irq) } } -void mac_disable_irq(unsigned int irq) +void mac_irq_disable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { From 8ff8584e51d4d3fbe08ede413c4a221223766323 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 8 Nov 2011 14:54:55 -0800 Subject: [PATCH 235/692] MIPS: Hook up process_vm_readv and process_vm_writev system calls. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2918/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/unistd.h | 18 ++++++++++++------ arch/mips/kernel/scall32-o32.S | 2 ++ arch/mips/kernel/scall64-64.S | 2 ++ arch/mips/kernel/scall64-n32.S | 2 ++ arch/mips/kernel/scall64-o32.S | 2 ++ 5 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index ecea7871dec2..d8dad5340ea3 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -365,16 +365,18 @@ #define __NR_syncfs (__NR_Linux + 342) #define __NR_sendmmsg (__NR_Linux + 343) #define __NR_setns (__NR_Linux + 344) +#define __NR_process_vm_readv (__NR_Linux + 345) +#define __NR_process_vm_writev (__NR_Linux + 346) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 344 +#define __NR_Linux_syscalls 346 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 344 +#define __NR_O32_Linux_syscalls 346 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -686,16 +688,18 @@ #define __NR_syncfs (__NR_Linux + 301) #define __NR_sendmmsg (__NR_Linux + 302) #define __NR_setns (__NR_Linux + 303) +#define __NR_process_vm_readv (__NR_Linux + 304) +#define __NR_process_vm_writev (__NR_Linux + 305) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 303 +#define __NR_Linux_syscalls 305 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 303 +#define __NR_64_Linux_syscalls 305 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1012,16 +1016,18 @@ #define __NR_syncfs (__NR_Linux + 306) #define __NR_sendmmsg (__NR_Linux + 307) #define __NR_setns (__NR_Linux + 308) +#define __NR_process_vm_readv (__NR_Linux + 309) +#define __NR_process_vm_writev (__NR_Linux + 310) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 308 +#define __NR_Linux_syscalls 310 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 308 +#define __NR_N32_Linux_syscalls 310 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 47920657968d..a632bc144efa 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -591,6 +591,8 @@ einval: li v0, -ENOSYS sys sys_syncfs 1 sys sys_sendmmsg 4 sys sys_setns 2 + sys sys_process_vm_readv 6 /* 4345 */ + sys sys_process_vm_writev 6 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index fb7334bea731..3b5a5e9ae49c 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -430,4 +430,6 @@ sys_call_table: PTR sys_syncfs PTR sys_sendmmsg PTR sys_setns + PTR sys_process_vm_readv + PTR sys_process_vm_writev /* 5305 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 6de1f598346e..6be6f7020923 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -430,4 +430,6 @@ EXPORT(sysn32_call_table) PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv + PTR compat_sys_process_vm_writev /* 6310 */ .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 1d813169e453..54228553691d 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -548,4 +548,6 @@ sys_call_table: PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv /* 4345 */ + PTR compat_sys_process_vm_writev .size sys_call_table,.-sys_call_table From 6d2dd054295e26dad0a84e2fe2029a1428242f8b Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Mon, 31 Oct 2011 23:50:16 -0200 Subject: [PATCH 236/692] [libata] libata-scsi.c: Add function parameter documentation Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs Signed-off-by: Marcos paulo de Souza Acked-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 72a9770ac42f..2a5412e7e9c1 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1217,6 +1217,10 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev) /** * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth + * @ap: ATA port to which the device change the queue depth + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * @reason: calling context * * libsas and libata have different approaches for associating a sdev to * its ata_port. From 003456145f0d23b73f080abd1fd7981788438693 Mon Sep 17 00:00:00 2001 From: JiSheng Zhang Date: Mon, 31 Oct 2011 21:20:10 +0800 Subject: [PATCH 237/692] ahci_platform: use dev_get_platdata() Use dev_get_platdata() to retrieve the struct ahci_platform_data data from the platform. Signed-off-by: JiSheng Zhang Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 004f2ce3dc73..ec555951176e 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -65,7 +65,7 @@ static struct scsi_host_template ahci_platform_sht = { static int __init ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); struct ata_port_info pi = ahci_port_info[id->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -191,7 +191,7 @@ static int __init ahci_probe(struct platform_device *pdev) static int __devexit ahci_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); From 142924cf402f9c0568004f0e2a27988fe3556c61 Mon Sep 17 00:00:00 2001 From: Chris Dunlop Date: Mon, 24 Oct 2011 10:38:18 +1100 Subject: [PATCH 238/692] sata_sis.c: trivial spelling fix Trivial spelling fix. Signed-off-by: Chris Dunlop Signed-off-by: Jeff Garzik --- drivers/ata/sata_sis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 447d9c05fb5a..95ec435f0eb4 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -104,7 +104,7 @@ static const struct ata_port_info sis_port_info = { }; MODULE_AUTHOR("Uwe Koziolek"); -MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); +MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); From 7a46c0780babea7d0b3f277a33ea243be38eb942 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Wed, 19 Oct 2011 17:17:02 -0700 Subject: [PATCH 239/692] [libata] Issue SRST to Sil3726 PMP Reenable sending SRST to devices connected behind a Sil3726 PMP. This allow staggered spinups and handles drives that spins up slowly. While the drives spin up, the PMP will not accept SRST. Most controller reissues the reset until the drive is ready, while some [Sil3124] returns an error. In ata_eh_error, wait 10s before reset the ATA port and try again. Signed-off-by: Gwendal Grignou Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 12 +++++++++++- drivers/ata/libata-pmp.c | 7 ++----- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f22957c2769a..a9b282038000 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2883,7 +2883,7 @@ int ata_eh_reset(struct ata_link *link, int classify, sata_scr_read(link, SCR_STATUS, &sstatus)) rc = -ERESTART; - if (rc == -ERESTART || try >= max_tries) { + if (try >= max_tries) { /* * Thaw host port even if reset failed, so that the port * can be retried on the next phy event. This risks @@ -2909,6 +2909,16 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_acquire(ap); } + /* + * While disks spinup behind PMP, some controllers fail sending SRST. + * They need to be reset - as well as the PMP - before retrying. + */ + if (rc == -ERESTART) { + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + goto out; + } + if (try == max_tries - 1) { sata_down_spd_limit(link, 0); if (slave) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 104462dbc524..21b80c555c60 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -389,12 +389,9 @@ static void sata_pmp_quirks(struct ata_port *ap) /* link reports offline after LPM */ link->flags |= ATA_LFLAG_NO_LPM; - /* Class code report is unreliable and SRST - * times out under certain configurations. - */ + /* Class code report is unreliable. */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_NO_SRST | - ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) From c9703765f3d5ab27909011dee4a05affe48e4442 Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Wed, 9 Nov 2011 01:47:36 -0500 Subject: [PATCH 240/692] [libata] ahci: Add ASMedia ASM1061 support Signed-off-by: Keng-Yu Lin Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 3 +++ include/linux/pci_ids.h | 2 ++ 2 files changed, 5 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fb7b90b05922..cf26222a93c5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -390,6 +390,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Asmedia */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3fdf251389de..172ba70306d1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2405,6 +2405,8 @@ #define PCI_VENDOR_ID_AZWAVE 0x1a3b +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 From 8d1c963a2e0c57dfe7f9c356389902e500cf1cfd Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 8 Nov 2011 20:37:26 +0100 Subject: [PATCH 241/692] ALSA: HDA: Remove quirk for Toshiba T110 According to the bug reporter, model=auto is needed to make the internal microphone work. BugLink: https://bugs.launchpad.net/bugs/819699 Reported-by: Andrej (agno01) Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 5e706e4d1737..0de21193a2b0 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3062,7 +3062,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), - SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5066_LAPTOP), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), From 0836b5cdd23d573bf7ec57f73ff774b3ad660bf4 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 4 Nov 2011 01:13:20 +0000 Subject: [PATCH 242/692] ARM: picoxcell: add extra temp register to addruart 639da5ee3 (ARM: add an extra temp register to the low level debugging addruart macro) didn't include picoxcell as it hadn't been merged at the time. Fix up the compile breakage by adding the extra temp parameter. Signed-off-by: Jamie Iles --- arch/arm/mach-picoxcell/include/mach/debug-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S index 8f2c234ed9d9..58d4ee3ae949 100644 --- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S +++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #define UART_SHIFT 2 - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE) ldr \rp, =PICOXCELL_UART1_BASE .endm From f7f9bdfadfda07afb904a9767468e38c2d1a6033 Mon Sep 17 00:00:00 2001 From: Julian Wollrath Date: Wed, 9 Nov 2011 10:02:40 +0100 Subject: [PATCH 243/692] ALSA: hda - fix internal mic on Dell Vostro 3500 laptop Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by: Julian Wollrath Cc: Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_sigmatel.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 4f3443230d89..edad99abec21 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -349,6 +349,7 @@ STAC92HD83* ref Reference board mic-ref Reference board with power management for ports dell-s14 Dell laptop + dell-vostro-3500 Dell Vostro 3500 laptop hp HP laptops with (inverted) mute-LED hp-dv7-4000 HP dv-7 4000 auto BIOS setup (default) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4e715fefebef..edc2b7bc177c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -95,6 +95,7 @@ enum { STAC_92HD83XXX_REF, STAC_92HD83XXX_PWR_REF, STAC_DELL_S14, + STAC_DELL_VOSTRO_3500, STAC_92HD83XXX_HP, STAC_92HD83XXX_HP_cNB11_INTQUAD, STAC_HP_DV7_4000, @@ -1659,6 +1660,12 @@ static const unsigned int dell_s14_pin_configs[10] = { 0x40f000f0, 0x40f000f0, }; +static const unsigned int dell_vostro_3500_pin_configs[10] = { + 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110, + 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160, + 0x400000f4, 0x400000f5, +}; + static const unsigned int hp_dv7_4000_pin_configs[10] = { 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110, 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140, @@ -1675,6 +1682,7 @@ static const unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, [STAC_DELL_S14] = dell_s14_pin_configs, + [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs, [STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs, [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs, }; @@ -1684,6 +1692,7 @@ static const char * const stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", + [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500", [STAC_92HD83XXX_HP] = "hp", [STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad", [STAC_HP_DV7_4000] = "hp-dv7-4000", @@ -1697,6 +1706,8 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD83XXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba, "unknown Dell", STAC_DELL_S14), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028, + "Dell Vostro 3500", STAC_DELL_VOSTRO_3500), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600, "HP", STAC_92HD83XXX_HP), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656, From 55c0008be67a27944b6705251d9a8d4c56c67701 Mon Sep 17 00:00:00 2001 From: Alexey Fisher Date: Wed, 9 Nov 2011 11:39:24 +0100 Subject: [PATCH 244/692] ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384 Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: Alexey Fisher Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c5444e00f0c6..ab23869c01bb 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -799,6 +799,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ case USB_ID(0x046d, 0x0991): /* Most audio usb devices lie about volume resolution. * Most Logitech webcams have res = 384. From 44656fa03926e7363ab41c565619800a4b3b1322 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 8 Nov 2011 10:20:10 -0800 Subject: [PATCH 245/692] kbuild: Fix missing system calls check on mips. Commit 5f7efb4 (Kbuild: append missing-syscalls to the default target list) broke MIPS build. Reported-tested-and-acked-by: Ralf Baechle Signed-off-by: David Daney Signed-off-by: Michal Marek --- Kbuild | 2 +- arch/mips/Makefile | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Kbuild b/Kbuild index 4caab4f6cba7..b8b708ad6dc3 100644 --- a/Kbuild +++ b/Kbuild @@ -92,7 +92,7 @@ always += missing-syscalls targets += missing-syscalls quiet_cmd_syscalls = CALL $< - cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) + cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags) missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE $(call cmd,syscalls) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9b4cb00407d7..0be318609fc6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -286,11 +286,11 @@ CLEAN_FILES += vmlinux.32 vmlinux.64 archprepare: ifdef CONFIG_MIPS32_N32 @echo ' Checking missing-syscalls for N32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32" endif ifdef CONFIG_MIPS32_O32 @echo ' Checking missing-syscalls for O32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32" endif install: From e0e20753c15fc418d94fee826af394907df856d8 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 27 Oct 2011 20:38:24 -0700 Subject: [PATCH 246/692] pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list" when pinctl subsystem is not selected, when compiling drivers including the include/linux/pinctrl/pinctrl.h, we will get the warning as below: In file included from include/linux/pinctrl/pinmux.h:17, from drivers/tty/serial/sirfsoc_uart.c:25: include/linux/pinctrl/pinctrl.h:126: warning: 'struct pinctrl_dev' declared inside parameter list include/linux/pinctrl/pinctrl.h:126: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Barry Song Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinctrl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 3605e947fa90..04c011038f32 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else +struct pinctrl_dev; /* Sufficiently stupid default function when pinctrl is not in use */ static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) From b3c41f4c18de9aa90315dd0d197f8485b00e3cc5 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 18 Sep 2011 09:56:35 +0800 Subject: [PATCH 247/692] ARM: at91: usart: drop static map regs for dbgu In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91cap9_devices.c | 5 ++--- arch/arm/mach-at91/at91rm9200_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9260_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9261_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9263_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9g45_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9rl_devices.c | 5 ++--- 7 files changed, 14 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index a4401d6b5b07..b9739baa21e4 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01d8bbd1468b..66591fa53e05 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 24b6f8c0440d..25e3464fb07f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3b70b3897d95..ae78f4d03b73 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 3faa1fde9ad9..ad017eb1f8df 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 000b5e1da965..ad00953a7f4f 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 305a851b5bff..429b6d7e9492 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); From 30458edf667b77012573e649fced3cf5c01efe82 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 2 Nov 2011 15:02:43 +0800 Subject: [PATCH 248/692] at91: vmalloc fix missing AT91_VIRT_BASE define VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Jamie Iles --- arch/arm/mach-at91/include/mach/vmalloc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h index 8eb459f3f5b7..8e4a1bd0ab1d 100644 --- a/arch/arm/mach-at91/include/mach/vmalloc.h +++ b/arch/arm/mach-at91/include/mach/vmalloc.h @@ -21,6 +21,8 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H +#include + #define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) #endif From b2eb5309fbc680406d6bf3b182178f0cfaf951fb Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 19 Sep 2011 19:26:52 +0800 Subject: [PATCH 249/692] at91/yl-9200: Fix section mismatch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/mach-at91/board-yl-9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 649b052231f5..12a3f955162b 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = { #include + +const char *name: Optional. Set this to help identify +the memory region, it will show up in the corresponding sysfs node. + + int memtype: Required if the mapping is used. Set this to UIO_MEM_PHYS if you you have physical memory on your @@ -553,7 +558,7 @@ instead to remember such an address. -Please do not touch the kobj element of +Please do not touch the map element of struct uio_mem! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. From b872a37437e93df9d112ce674752b3b3a0a17020 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 09:33:56 -0500 Subject: [PATCH 496/692] drm/radeon: add some missing FireMV pci ids Noticed by Egbert. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Egbert Eich Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 3d53efd25ab9..f81676f1b310 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -4,6 +4,7 @@ */ #define radeon_PCI_IDS \ {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ + {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -55,6 +56,7 @@ {0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ + {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \ {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ From 6c47e5c23aa2a7c54ad7ac13af4bd56cd9e703bf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 14:32:01 -0500 Subject: [PATCH 497/692] drm/radeon/kms: fix up gpio i2c mask bits for r4xx Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index d2d179267af3..0a4ec1ed02c0 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -85,6 +85,18 @@ static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rd for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + /* some evergreen boards have bad data for this entry */ if (ASIC_IS_DCE4(rdev)) { if ((i == 7) && From 6991b8f2a3193397461104a27be417addb8d032b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 17:52:51 -0500 Subject: [PATCH 498/692] drm/radeon/kms: fix segfault in pm rework Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 0a4ec1ed02c0..fecd705a1a5f 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2008,14 +2008,14 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) return state_index; /* last mode is usually default, array is low to high */ for (i = 0; i < num_modes; i++) { + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; + rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; switch (frev) { case 1: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = @@ -2051,11 +2051,6 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 2: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = @@ -2092,11 +2087,6 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 3: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = From 52b3bfc69efc44447ed2db25dd999aef64b3c970 Mon Sep 17 00:00:00 2001 From: Lucas Kannebley Tavares Date: Fri, 28 Oct 2011 13:52:08 -0200 Subject: [PATCH 499/692] jsm: Change maintainership Breno Leitao has passed the maintainership on to me. Signed-off-by: Lucas Kannebley Tavares Acked-by: Breno Leitao Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256446f2..cc6a46645432 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3710,7 +3710,7 @@ F: fs/jbd2/ F: include/linux/jbd2.h JSM Neo PCI based serial card -M: Breno Leitao +M: Lucas Tavares L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/jsm/ From c2a3e84f950e7ddba1f3914b005861d46ae60359 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 19:19:43 -0700 Subject: [PATCH 500/692] tty: hvc_dcc: Fix duplicate character inputs Reading from the DCC grabs a character from the buffer and clears the status bit. Since this is a context-changing operation, instructions following the character read that rely on the status bit being accurate need to be synchronized with an ISB. In this case, the status bit check needs to execute after the character read otherwise we run the risk of reading the character and checking the status bit before the read can clear the status bit in the first place. When this happens, the user will see the same character they typed twice, instead of once. Add an ISB after the read and the write, so that the status check is synchronized with the read/write operations. Signed-off-by: Stephen Boyd Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_dcc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 435f6facbc23..44fbebab5075 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -46,6 +46,7 @@ static inline char __dcc_getchar(void) asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); + isb(); return __c; } @@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c) asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); + isb(); } static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) From a1d7cfe29f13cf45f8094929864b9c66bf0cd91b Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 27 Oct 2011 15:45:18 +0900 Subject: [PATCH 501/692] pch_uart: Fix hw-flow control issue Using hardware flow control, currently, register of the control-bit(AFE) is not set. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 21febef926aa..2f07a6702eab 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1280,6 +1280,7 @@ static void pch_uart_set_termios(struct uart_port *port, if (rtn) goto out; + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); From 8249f743f732ccbc3056428945ab1d9bd36d46bf Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:49 +0900 Subject: [PATCH 502/692] pch_uart: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 14 +++++++------- drivers/tty/serial/pch_uart.c | 8 ++++++++ 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5f479dada6f2..925a1e547a83 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1560,7 +1560,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI select SERIAL_CORE help @@ -1568,12 +1568,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2f07a6702eab..2ef0e7d02991 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -258,6 +258,8 @@ enum pch_uart_num_t { pch_ml7213_uart2, pch_ml7223_uart0, pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, }; static struct pch_uart_driver_data drv_dat[] = { @@ -270,6 +272,8 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; static unsigned int default_baud = 9600; @@ -1553,6 +1557,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = pch_ml7223_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, {0,}, }; From eca9dfa846a3d0eeb865e290851f4bfe4fb34fdd Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:50 +0900 Subject: [PATCH 503/692] pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2ef0e7d02991..ac852b5a8f93 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1,5 +1,5 @@ /* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * *This program is free software; you can redistribute it and/or modify *it under the terms of the GNU General Public License as published by @@ -46,8 +46,8 @@ enum { /* Set the max number of UART port * Intel EG20T PCH: 4 port - * OKI SEMICONDUCTOR ML7213 IOH: 3 port - * OKI SEMICONDUCTOR ML7223 IOH: 2 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port */ #define PCH_UART_NR 4 From 9636b755da7b498094bdf15b4ce9f6fd16995e4e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 11 Oct 2011 17:05:43 -0700 Subject: [PATCH 504/692] tty/serial: Prevent drop of DCD on suspend for Tegra UARTs On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not externally accessible. Instead, the DTR line internally appears to be looped back to be the input to the DCD and DSR lines. The net effect of this is that when we drop DTR (like when we suspend), we'll see DCD drop too. ...and when we see DCD drop, we treat that as a hangup. In order to prevent this hangup from occurring at every sleep, we need to force DTR to remain high on Tegra UARTs. This patch uses the mcr_mask / mcr_force fields, which were originally added for the kludge ALPHA_KLUDGE_MCR. Using these fields does not prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if" tests I have added and always init mcr_mask / mcr_force from the serial8250_config. NOTE: If we have people that are using UARTA on a Tegra and need to control DTR, we'll need to either add a separate port type for UARTA or we'll need to add some tegra-specific code to detect whether the DTR needs to be left high. Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 14 ++++++++++++++ drivers/tty/serial/8250.h | 2 ++ 2 files changed, 16 insertions(+) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index eeadf1b8e093..2b0a4b63c5f7 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,6 +308,8 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + .mcr_mask = ~UART_MCR_DTR, + .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1229,6 +1231,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1987,6 +1993,10 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2793,6 +2803,10 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[type].mcr_mask; + up->mcr_force = uart_config[type].mcr_force; + } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 6edf4a6a22d4..1f7510051707 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,6 +35,8 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; + unsigned char mcr_mask; + unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ From 604fdb75094a7367e1794fd0f62183380364ce13 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Nov 2011 13:17:55 +0000 Subject: [PATCH 505/692] serial,mfd: Fix CMSPAR setup This is referenced the wrong way. Mika Westerberg added some checks to the tty to support multiple console, but the real problem is simply referencing the termios object via the wrong path. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mfd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 286c386d9c46..e272d3919c67 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -884,7 +884,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, { struct uart_hsu_port *up = container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -907,8 +906,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, } /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; + termios->c_cflag &= ~CMSPAR; if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; From 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:55:27 +0900 Subject: [PATCH 506/692] pch_uart: Fix DMA resource leak issue Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get DMA channel resource. setserial /dev/ttyPCH0 ^low_latency setserial /dev/ttyPCH0 low_latency CAUSE: Changing mode using setserial command, ".startup" function which gets DMA channel is called before ".verify_port" function which sets dma-flag(use_dma/use_dma_flag) as 1. PIO->DMA .startup: Since dma-flag is 0, DMA channel is not requested. .verify_port: dma-flag is set as 1. .shutdown: N/A DMA->PIO .startup: Since dma-flag is 1, DMA channel is requested. .verify_port: dma-flag is set as 0. .shutdown: Since dma-flag is 0, DMA channel is not released. This means DMA channel resource leak occurs. Next time, this driver can't get DMA channel resource forever. MODIFICATION: Currently, when release DMA channel resource, this driver checks dma-flag. However, this specification occurs the above issue. This driver must check whether dma_request_channel is executed or not. The values are saved in private data variable "chan_tx/chan_tx". These variables mean if the value is NULL, DMA channel is not requested, if not NULL, DMA channel is requested. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index ac852b5a8f93..d6aba8c087e4 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -632,6 +632,7 @@ static void pch_request_dma(struct uart_port *port) dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", __func__); dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; return; } @@ -1219,8 +1220,7 @@ static void pch_uart_shutdown(struct uart_port *port) dev_err(priv->port.dev, "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - if (priv->use_dma_flag) - pch_free_dma(port); + pch_free_dma(port); free_irq(priv->port.irq, priv); } From 93f3350c46fa5dfcc9650eb19b186e71ffc924c3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Wed, 9 Nov 2011 15:51:49 +0100 Subject: [PATCH 507/692] RS485: fix inconsistencies in the meaning of some variables The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the serial_rs485 structure in a different way. In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead, uses these values to know if a delay must be set before and after sending. This patch makes the usage of these variables consistent across all drivers and fixes the Documentation as well. From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be understood by looking only at the value of delay_rts_before_send and delay_rts_after_send. Signed-off-by: Claudio Scordino Signed-off-by: Darron Black Acked-by: Jesper Nilsson Acked-by: Nicolas Ferre Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/serial-rs485.txt | 14 +++++++++++--- drivers/tty/serial/atmel_serial.c | 16 +++------------- drivers/tty/serial/crisv10.c | 10 ++-------- include/linux/serial.h | 14 ++++++++------ 4 files changed, 24 insertions(+), 30 deletions(-) diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 079cb3df62cf..41c8378c0b2f 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -97,15 +97,23 @@ struct serial_rs485 rs485conf; - /* Set RS485 mode: */ + /* Enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + /* Set rts delay before send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; rs485conf.delay_rts_before_send = ...; /* Set rts delay after send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; rs485conf.delay_rts_after_send = ...; /* Set this flag if you want to receive data even whilst sending data */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4a0f86fa1e90..4c823f341d98 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + if ((rs485conf->delay_rts_after_send) > 0) UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { @@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; - if (rs485conf->delay_rts_before_send == 0 && - rs485conf->delay_rts_after_send == 0) { - rs485conf->flags |= SER_RS485_RTS_ON_SEND; - } else { - if (rs485conf->delay_rts_before_send) - rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND; - if (rs485conf->delay_rts_after_send) - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b7435043f2fe..1dfba7b779c8 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty, e100_disable_rx(info); e100_enable_rx_irq(info); #endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); } #endif /* CONFIG_ETRAX_RS485 */ @@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty, rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); if (rs485ctrl.enabled) rs485data.flags |= SER_RS485_ENABLED; @@ -4531,7 +4526,6 @@ static int __init rs_init(void) /* Set sane defaults */ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); info->rs485.delay_rts_before_send = 0; info->rs485.flags &= ~(SER_RS485_ENABLED); #endif diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e27a6cc..3d86517fe7d5 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; From db3e74b582915d66e10b0c73a62763418f54c340 Mon Sep 17 00:00:00 2001 From: Mitsuo Hayasaka Date: Thu, 10 Nov 2011 01:33:10 +0000 Subject: [PATCH 508/692] xfs: use doalloc flag in xfs_qm_dqattach_one() The doalloc arg in xfs_qm_dqattach_one() is a flag that indicates whether a new area to handle quota information will be allocated if needed. Originally, it was passed to xfs_qm_dqget(), but has been removed by the following commit (probably by mistake): commit 8e9b6e7fa4544ea8a0e030c8987b918509c8ff47 Author: Christoph Hellwig Date: Sun Feb 8 21:51:42 2009 +0100 xfs: remove the unused XFS_QMOPT_DQLOCK flag As the result, xfs_qm_dqget() called from xfs_qm_dqattach_one() never allocates the new area even if it is needed. This patch gives the doalloc arg to xfs_qm_dqget() in xfs_qm_dqattach_one() to fix this problem. Signed-off-by: Mitsuo Hayasaka Cc: Alex Elder Cc: Christoph Hellwig Reviewed-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_qm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index 5cff443f6cdb..0bbb1a41998b 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -674,7 +674,8 @@ xfs_qm_dqattach_one( * disk and we didn't ask it to allocate; * ESRCH if quotas got turned off suddenly. */ - error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp); + error = xfs_qm_dqget(ip->i_mount, ip, id, type, + doalloc | XFS_QMOPT_DOWARN, &dqp); if (error) return error; From af8db1508f2c9f3b6e633e2d2d906c6557c617f9 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 15 Nov 2011 21:52:29 +0100 Subject: [PATCH 509/692] PM / driver core: disable device's runtime PM during shutdown There may be an issue when the user issue "reboot/shutdown" command, then the device has shut down its hardware, after that, this runtime-pm featured device's driver will probably be scheduled to do its suspend routine, and at its suspend routine, it may access hardware, but the device has already shutdown physically, then the system hang may be occurred. I ran out this issue using an auto-suspend supported USB devices, like 3G modem, keyboard. The usb runtime suspend routine may be scheduled after the usb controller has been shut down, and the usb runtime suspend routine will try to suspend its roothub(controller), it will access register, then the system hang occurs as the controller is shutdown. Signed-off-by: Peter Chen Acked-by: Ming Lei Acked-by: Greg Kroah-Hartman Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki --- drivers/base/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 82c865452c70..d8b3d89db043 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "base.h" #include "power/power.h" @@ -1742,6 +1743,8 @@ void device_shutdown(void) */ list_del_init(&dev->kobj.entry); spin_unlock(&devices_kset->list_lock); + /* Disable all device's runtime power management */ + pm_runtime_disable(dev); if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); From e88d2468718b0789b4c33da2f7e1cef2a1eee279 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Nov 2011 12:57:00 -0800 Subject: [PATCH 510/692] sparc: Stash orig_i0 into %g6 instead of %g2 As per the comments added by this commit, %g2 turns out to not be a usable place to save away orig_i0 for syscall restart handling. In fact all of %g2, %g3, %g4, and %g5 are assumed to be saved across a system call by various bits of code in glibc. %g1 can't be used because that holds the syscall number, which would need to be saved and restored for syscall restart handling too, and that would only compound our problems :-) This leaves us with %g6 and %g7 which are for "system use". %g7 is used as the "thread register" by glibc, but %g6 is used as a compiler and assembler temporary scratch register. And in no instance is %g6 used to hold a value across a system call. Therefore %g6 is safe for storing away orig_i0, at least for now. Signed-off-by: David S. Miller --- arch/sparc/kernel/signal32.c | 2 +- arch/sparc/kernel/signal_32.c | 20 +++++++++++++++----- arch/sparc/kernel/signal_64.c | 20 +++++++++++++++----- 3 files changed, 31 insertions(+), 11 deletions(-) diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 2e86fd1ddc7b..023b8860dc97 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -837,7 +837,7 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs) if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } if (signr > 0) { diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 7dfaff64cd6b..d54c6e53aba0 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -523,12 +523,22 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * register for GDB to save and restore in order to get * orig_i0 correct for syscall restarts when debugging. * - * However, we luckily can use the fact that several registers - * are volatile across system calls. One such register is - * %g2, so use that as a place to save away orig_i0. + * Although it should be the case that most of the global + * registers are volatile across a system call, glibc already + * depends upon that fact that we preserve them. So we can't + * just use any global register to save away the orig_i0 value. + * + * In particular %g2, %g3, %g4, and %g5 are all assumed to be + * preserved across a system call trap by various pieces of + * code in glibc. + * + * %g7 is used as the "thread register". %g6 is not used in + * any fixed manner. %g6 is used as a scratch register and + * a compiler temporary, but it's value is never used across + * a system call. Therefore %g6 is usable for orig_i0 storage. */ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) - regs->u_regs[UREG_G2] = orig_i0; + regs->u_regs[UREG_G6] = orig_i0; if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; @@ -544,7 +554,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) restart_syscall = 0; if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 1ddf0dedb929..f0836cd0e2f2 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -533,13 +533,23 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * register for GDB to save and restore in order to get * orig_i0 correct for syscall restarts when debugging. * - * However, we luckily can use the fact that several registers - * are volatile across system calls. One such register is - * %g2, so use that as a place to save away orig_i0. + * Although it should be the case that most of the global + * registers are volatile across a system call, glibc already + * depends upon that fact that we preserve them. So we can't + * just use any global register to save away the orig_i0 value. + * + * In particular %g2, %g3, %g4, and %g5 are all assumed to be + * preserved across a system call trap by various pieces of + * code in glibc. + * + * %g7 is used as the "thread register". %g6 is not used in + * any fixed manner. %g6 is used as a scratch register and + * a compiler temporary, but it's value is never used across + * a system call. Therefore %g6 is usable for orig_i0 storage. */ if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) - regs->u_regs[UREG_G2] = orig_i0; + regs->u_regs[UREG_G6] = orig_i0; if (current_thread_info()->status & TS_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; @@ -560,7 +570,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } if (signr > 0) { From 3486140e30fcc16c0b8cd9545fbe5e2e66bf6941 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:39 +0000 Subject: [PATCH 511/692] net-next:asix:PHY_MODE_RTL8211CL should be 0xC Use correct value for rtl phy support. (rtl phy are in AX88178 devices like NWU220G and USB2-ET1000). Signed-off-by: Allan Chou Tested-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e81e22e3d1d2..873860d46e9e 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -163,7 +163,7 @@ #define MARVELL_CTRL_TXDELAY 0x0002 #define MARVELL_CTRL_RXDELAY 0x0080 -#define PHY_MODE_RTL8211CL 0x0004 +#define PHY_MODE_RTL8211CL 0x000C /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct asix_data { From a77929a278651d4451c872178d4d7aac8908aa8e Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:40 +0000 Subject: [PATCH 512/692] net-next:asix:poll in asix_get_phyid in case phy not ready Sometimes the phy isn't ready after reset...poll and pray it will be soon. Signed-off-by: Freddy Xin Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 873860d46e9e..b4675e89e42c 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -652,9 +652,17 @@ static u32 asix_get_phyid(struct usbnet *dev) { int phy_reg; u32 phy_id; + int i; - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); - if (phy_reg < 0) + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) return 0; phy_id = (phy_reg & 0xffff) << 16; From d3665188a79254c0698aa161e2c36dcda4e9ef55 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:41 +0000 Subject: [PATCH 513/692] net-next:asix: reduce AX88772 init time by about 2 seconds ax88772_reset takes about 2 seconds and is called twice. Once from ax88772_bind() directly and again indirectly from usbnet_open(). Reset the USB FW/Phy enough to blink the LEDs when inserted. Signed-off-by: Allan Chou Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index b4675e89e42c..8462be589558 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1083,7 +1083,7 @@ static const struct net_device_ops ax88772_netdev_ops = { static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { - int ret; + int ret, embd_phy; struct asix_data *data = (struct asix_data *)&dev->data; u8 buf[ETH_ALEN]; u32 phyid; @@ -1108,16 +1108,36 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.reg_num_mask = 0x1f; dev->mii.phy_id = asix_get_phy_addr(dev); - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - dev->net->netdev_ops = &ax88772_netdev_ops; dev->net->ethtool_ops = &ax88772_ethtool_ops; - ret = ax88772_reset(dev); + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + + /* Reset the PHY to normal operation mode */ + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + return ret; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); if (ret < 0) return ret; + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { /* hard_mtu is still the default - the device does not support From b2d3ad291fab1783cc12eef3dd91c5fa98c2e5d5 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:42 +0000 Subject: [PATCH 514/692] net-next:asix: V2 more fixes for ax88178 phy init sequence Now works on Samsung Series 5 (chromebook) Two fixes here: o use 0x7F mask for phymode o read phyid *AFTER* phy is powered up (via GPIOs) Signed-off-by: Allan Chou Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 8462be589558..f870ab964e3a 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1248,6 +1248,7 @@ static int ax88178_reset(struct usbnet *dev) __le16 eeprom; u8 status; int gpio0 = 0; + u32 phyid; asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); dbg("GPIO Status: 0x%04x", status); @@ -1263,12 +1264,13 @@ static int ax88178_reset(struct usbnet *dev) data->ledmode = 0; gpio0 = 1; } else { - data->phymode = le16_to_cpu(eeprom) & 7; + data->phymode = le16_to_cpu(eeprom) & 0x7F; data->ledmode = le16_to_cpu(eeprom) >> 8; gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; } dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); + /* Power up external GigaPHY through AX88178 GPIO pin */ asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); if ((le16_to_cpu(eeprom) >> 8) != 1) { asix_write_gpio(dev, 0x003c, 30); @@ -1280,6 +1282,13 @@ static int ax88178_reset(struct usbnet *dev) asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); } + /* Read PHYID register *AFTER* powering up PHY */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ + asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); + asix_sw_reset(dev, 0); msleep(150); @@ -1424,7 +1433,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; u8 buf[ETH_ALEN]; - u32 phyid; struct asix_data *data = (struct asix_data *)&dev->data; data->eeprom_len = AX88772_EEPROM_LEN; @@ -1451,12 +1459,12 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->netdev_ops = &ax88178_netdev_ops; dev->net->ethtool_ops = &ax88178_ethtool_ops; - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); + /* Blink LEDS so users know driver saw dongle */ + asix_sw_reset(dev, 0); + msleep(150); - ret = ax88178_reset(dev); - if (ret < 0) - return ret; + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { From 46993f02d88ae9fc6dfb4e8625d80a1630e7863b Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:43 +0000 Subject: [PATCH 515/692] net-next:asix: V2 Update VERSION Only update VERSION to reflect previous changes. Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index f870ab964e3a..e6fed4d4cb77 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -36,7 +36,7 @@ #include #include -#define DRIVER_VERSION "26-Sep-2011" +#define DRIVER_VERSION "08-Nov-2011" #define DRIVER_NAME "asix" /* ASIX AX8817X based USB 2.0 Ethernet Devices */ From 6edf0c9b1c26d047370cf2f35ff6bb3082243ec3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 15 Nov 2011 16:01:09 -0800 Subject: [PATCH 516/692] Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" This reverts commit 9636b755da7b498094bdf15b4ce9f6fd16995e4e. It wasn't supposed to be applied, thanks to Doug for letting me know. Cc: Doug Anderson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 14 -------------- drivers/tty/serial/8250.h | 2 -- 2 files changed, 16 deletions(-) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 2b0a4b63c5f7..eeadf1b8e093 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,8 +308,6 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, - .mcr_mask = ~UART_MCR_DTR, - .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1231,10 +1229,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1993,10 +1987,6 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2803,10 +2793,6 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[type].mcr_mask; - up->mcr_force = uart_config[type].mcr_force; - } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 1f7510051707..6edf4a6a22d4 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,8 +35,6 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; - unsigned char mcr_mask; - unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ From 9f35a33b8d06263a165efe3541d9aa0cdbd70b3b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 15 Nov 2011 22:09:45 +0000 Subject: [PATCH 517/692] KEYS: Fix a NULL pointer deref in the user-defined key type Fix a NULL pointer deref in the user-defined key type whereby updating a negative key into a fully instantiated key will cause an oops to occur when the code attempts to free the non-existent old payload. This results in an oops that looks something like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] __call_rcu+0x11/0x13e PGD 3391d067 PUD 3894a067 PMD 0 Oops: 0002 [#1] SMP CPU 1 Pid: 4354, comm: keyctl Not tainted 3.1.0-fsdevel+ #1140 /DG965RY RIP: 0010:[] [] __call_rcu+0x11/0x13e RSP: 0018:ffff88003d591df8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000006e RDX: ffffffff8161d0c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003d591e18 R08: 0000000000000000 R09: ffffffff8152fa6c R10: 0000000000000000 R11: 0000000000000300 R12: ffff88003b8f9538 R13: ffffffff8161d0c0 R14: ffff88003b8f9d50 R15: ffff88003c69f908 FS: 00007f97eb18c720(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000003d47a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process keyctl (pid: 4354, threadinfo ffff88003d590000, task ffff88003c78a040) Stack: ffff88003e0ffde0 ffff88003b8f9538 0000000000000001 ffff88003b8f9d50 ffff88003d591e28 ffffffff810860f0 ffff88003d591e68 ffffffff8117bfea ffff88003d591e68 ffffffff00000000 ffff88003e0ffde1 ffff88003e0ffde0 Call Trace: [] call_rcu_sched+0x10/0x12 [] user_update+0x8d/0xa2 [] key_create_or_update+0x236/0x270 [] sys_add_key+0x123/0x17e [] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells Acked-by: Jeff Layton Acked-by: Neil Horman Acked-by: Steve Dickson Acked-by: James Morris Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- security/keys/user_defined.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c index 5b366d7af3c4..69ff52c08e97 100644 --- a/security/keys/user_defined.c +++ b/security/keys/user_defined.c @@ -102,7 +102,8 @@ int user_update(struct key *key, const void *data, size_t datalen) key->expiry = 0; } - kfree_rcu(zap, rcu); + if (zap) + kfree_rcu(zap, rcu); error: return ret; From cb871513f656bdfc48b185b55f37857b5c750c40 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 15 Nov 2011 14:35:52 -0800 Subject: [PATCH 518/692] Revert "leds: save the delay values after a successful call to blink_set()" Revert commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d. The problem this patch intends to solve has alreadqy been fixed by commit 7a5caabd090b ("drivers/leds/ledtrig-timer.c: fix broken sysfs delay handling"). Signed-off-by: Johan Hovold Cc: Antonio Ospite Cc: Johannes Berg Cc: Richard Purdie Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/led-class.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 661b692573e7..6d5628bb0601 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -270,11 +270,8 @@ void led_blink_set(struct led_classdev *led_cdev, del_timer_sync(&led_cdev->blink_timer); if (led_cdev->blink_set && - !led_cdev->blink_set(led_cdev, delay_on, delay_off)) { - led_cdev->blink_delay_on = *delay_on; - led_cdev->blink_delay_off = *delay_off; + !led_cdev->blink_set(led_cdev, delay_on, delay_off)) return; - } /* blink with 1 Hz as default if nothing specified */ if (!*delay_on && !*delay_off) From 12340313cf940e61beb52b996a5845ffa290626d Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 15 Nov 2011 14:35:59 -0800 Subject: [PATCH 519/692] MAINTAINERS: add new cgroup list to CC notice As discussed at Kernel Summit(2011), new cgroups mailing list is opened by James. This list is for discussing general cgroup design and patches including all subsystems and for getting more attentions to cgroups/namespaces related issues by developpers. Signed-off-by: KAMEZAWA Hiroyuki Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 071a99674347..aca136b84508 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1930,6 +1930,7 @@ CONTROL GROUPS (CGROUPS) M: Paul Menage M: Li Zefan L: containers@lists.linux-foundation.org +L: cgroups@vger.kernel.org S: Maintained F: include/linux/cgroup* F: kernel/cgroup* @@ -4304,6 +4305,7 @@ MEMORY RESOURCE CONTROLLER M: Balbir Singh M: Daisuke Nishimura M: KAMEZAWA Hiroyuki +L: cgroups@vger.kernel.org L: linux-mm@kvack.org S: Maintained F: mm/memcontrol.c From 001ef5e4554b851cf50fe03bc4c266c28ed8e62d Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 15 Nov 2011 14:36:02 -0800 Subject: [PATCH 520/692] drivers/misc/eeprom: fix dependecy on 'PPC_MPC5200_GPIO' The driver for the DigsyMTC display configuration EEPROMs device got added by commit 469dded183 ("misc/eeprom: add eeprom access driver for digsy_mtc board"). Its Kconfig symbol depends on PPC_MPC5200_GPIO. But at the time that driver got added PPC_MPC5200_GPIO was already renamed to GPIO_MPC5200, by commit 6eae1ace68 ("gpio: Move mpc5200 gpio driver to drivers/gpio"). So make this driver depend on GPIO_MPC5200. And since GPIO_MPC5200 itself implies that GPIOLIB is set, that dependency can be dropped. Signed-off-by: Paul Bolle Acked-by: Anatolij Gustschin Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/eeprom/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 26cf12ca7f50..701edf658970 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -85,7 +85,7 @@ config EEPROM_93XX46 config EEPROM_DIGSY_MTC_CFG bool "DigsyMTC display configuration EEPROMs device" - depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO + depends on GPIO_MPC5200 && SPI_GPIO help This option enables access to display configuration EEPROMs on digsy_mtc board. You have to additionally select Microwire From 5aecc85abdb9ac2b0e6548d13652a34142e7ae89 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 15 Nov 2011 14:36:07 -0800 Subject: [PATCH 521/692] oom: do not kill tasks with oom_score_adj OOM_SCORE_ADJ_MIN Commit c9f01245 ("oom: remove oom_disable_count") has removed the oom_disable_count counter which has been used for early break out from oom_badness so we could never select a task with oom_score_adj set to OOM_SCORE_ADJ_MIN (oom disabled). Now that the counter is gone we are always going through heuristics calculation and we always return a non zero positive value. This means that we can end up killing a task with OOM disabled because it is indistinguishable from regular tasks with 1% resp. CAP_SYS_ADMIN tasks with 3% usage of memory or tasks with oom_score_adj set but OOM enabled. Let's break out early if the task should have OOM disabled. Signed-off-by: Michal Hocko Acked-by: David Rientjes Acked-by: KOSAKI Motohiro Cc: Oleg Nesterov Cc: Ying Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 471dedb463ab..76f2c5ae908e 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -185,6 +185,11 @@ unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem, if (!p) return 0; + if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) { + task_unlock(p); + return 0; + } + /* * The memory controller may have a limit of 0 bytes, so avoid a divide * by zero, if necessary. From 66e13e66b6c4e5b2ecd6225e1f8437640cfb6498 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 15 Nov 2011 14:36:09 -0800 Subject: [PATCH 522/692] drivers/firmware/dmi_scan.c: make dmi_name_in_vendors more focused The current implementation of dmi_name_in_vendors() is an invitation to lazy coding and false positives [1]. Searching for a string in 8 know what you're looking for, so you should know where to look. strstr isn't fast, especially when it fails, so we should avoid calling it when it just can't succeed. Looking at the current users of the function, it seems clear to me that they are looking for a system or board vendor name, so let's limit dmi_name_in_vendors to these two DMI fields. This much better matches the function name, BTW. [1] We currently have code looking for short names in DMI data, such as "IBM", "ASUS" or "Acer". I let you guess what will happen the day other vendors ship products named, for example, "SCHREIBMEISTER", "PEGASUS" or "Acerola". Signed-off-by: Jean Delvare Cc: Andi Kleen Cc: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/dmi_scan.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index bcb1126e3d00..153980be4ee6 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -585,14 +585,12 @@ int dmi_name_in_serial(const char *str) } /** - * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information. + * dmi_name_in_vendors - Check if string is in the DMI system or board vendor name * @str: Case sensitive Name */ int dmi_name_in_vendors(const char *str) { - static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR, - DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR, - DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE }; + static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE }; int i; for (i = 0; fields[i] != DMI_NONE; i++) { int f = fields[i]; From ea4039a34c4c206d015d34a49d0b00868e37db1d Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Tue, 15 Nov 2011 14:36:12 -0800 Subject: [PATCH 523/692] hugetlb: release pages in the error path of hugetlb_cow() If we fail to prepare an anon_vma, the {new, old}_page should be released, or they will leak. Signed-off-by: Hillf Danton Reviewed-by: Andrea Arcangeli Cc: Hugh Dickins Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index dae27ba3be2c..bb28a5f9db8d 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2422,6 +2422,8 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma, * anon_vma prepared. */ if (unlikely(anon_vma_prepare(vma))) { + page_cache_release(new_page); + page_cache_release(old_page); /* Caller expects lock to be held */ spin_lock(&mm->page_table_lock); return VM_FAULT_OOM; From 8889023a4ab5f32325b568e7626fd2233cf64fa5 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 01:43:23 +0100 Subject: [PATCH 524/692] unicore32: Fix typo 'PUV3_I2C' Signed-off-by: Paul Bolle Acked-by: Guan Xuetao --- arch/unicore32/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index e57dcce9bfda..942ed6174f1d 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -237,13 +237,13 @@ menu "PKUnity NetBook-0916 Features" config I2C_BATTERY_BQ27200 tristate "I2C Battery BQ27200 Support" - select PUV3_I2C + select I2C_PUV3 select POWER_SUPPLY select BATTERY_BQ27x00 config I2C_EEPROM_AT24 tristate "I2C EEPROMs AT24 support" - select PUV3_I2C + select I2C_PUV3 select MISC_DEVICES select EEPROM_AT24 From ed96dfbcfea92233d27db9d3c77fc91a58c959bf Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Nov 2011 14:54:51 -0800 Subject: [PATCH 525/692] unicore32, exec: remove redundant set_fs(USER_DS) The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause Cc: Guan Xuetao Signed-off-by: Andrew Morton Acked-by: Guan Xuetao --- arch/unicore32/include/asm/processor.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h index e11cb0786578..f0d780a51f9b 100644 --- a/arch/unicore32/include/asm/processor.h +++ b/arch/unicore32/include/asm/processor.h @@ -53,7 +53,6 @@ struct thread_struct { #define start_thread(regs, pc, sp) \ ({ \ unsigned long *stack = (unsigned long *)sp; \ - set_fs(USER_DS); \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ regs->UCreg_asr = USER_MODE; \ regs->UCreg_pc = pc & ~1; /* pc */ \ From 9c8b39077b0a5b0990bb707fcd7b5913d7b322b8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:56:05 -0500 Subject: [PATCH 526/692] powerpc: Fix build breakage in jump_label.c Should do what other architectures do and wrap all that code into the appropriate ifdef Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/jump_label.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/jump_label.c b/arch/powerpc/kernel/jump_label.c index 368d158d665d..a1ed8a8c7cb4 100644 --- a/arch/powerpc/kernel/jump_label.c +++ b/arch/powerpc/kernel/jump_label.c @@ -11,6 +11,7 @@ #include #include +#ifdef HAVE_JUMP_LABEL void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type) { @@ -21,3 +22,4 @@ void arch_jump_label_transform(struct jump_entry *entry, else patch_instruction(addr, PPC_INST_NOP); } +#endif From 4933402075d4f38a82c491a4afca6ca7661aa0a8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:57:05 -0500 Subject: [PATCH 527/692] carma-fpga: Missed switch from of_register_platform_driver() ... by 6 months Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt --- drivers/misc/carma/carma-fpga-program.c | 9 ++++----- drivers/misc/carma/carma-fpga.c | 9 ++++----- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c index 7ce6065dc20e..eb5cd28bc6d8 100644 --- a/drivers/misc/carma/carma-fpga-program.c +++ b/drivers/misc/carma/carma-fpga-program.c @@ -945,8 +945,7 @@ static int fpga_of_remove(struct platform_device *op) /* CTL-CPLD Version Register */ #define CTL_CPLD_VERSION 0x2000 -static int fpga_of_probe(struct platform_device *op, - const struct of_device_id *match) +static int fpga_of_probe(struct platform_device *op) { struct device_node *of_node = op->dev.of_node; struct device *this_device; @@ -1107,7 +1106,7 @@ static struct of_device_id fpga_of_match[] = { {}, }; -static struct of_platform_driver fpga_of_driver = { +static struct platform_driver fpga_of_driver = { .probe = fpga_of_probe, .remove = fpga_of_remove, .driver = { @@ -1124,12 +1123,12 @@ static struct of_platform_driver fpga_of_driver = { static int __init fpga_init(void) { led_trigger_register_simple("fpga", &ledtrig_fpga); - return of_register_platform_driver(&fpga_of_driver); + return platform_driver_register(&fpga_of_driver); } static void __exit fpga_exit(void) { - of_unregister_platform_driver(&fpga_of_driver); + platform_driver_unregister(&fpga_of_driver); led_trigger_unregister_simple(ledtrig_fpga); } diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c index 3965821fef17..14e974b2a781 100644 --- a/drivers/misc/carma/carma-fpga.c +++ b/drivers/misc/carma/carma-fpga.c @@ -1249,8 +1249,7 @@ static bool dma_filter(struct dma_chan *chan, void *data) return true; } -static int data_of_probe(struct platform_device *op, - const struct of_device_id *match) +static int data_of_probe(struct platform_device *op) { struct device_node *of_node = op->dev.of_node; struct device *this_device; @@ -1401,7 +1400,7 @@ static struct of_device_id data_of_match[] = { {}, }; -static struct of_platform_driver data_of_driver = { +static struct platform_driver data_of_driver = { .probe = data_of_probe, .remove = data_of_remove, .driver = { @@ -1417,12 +1416,12 @@ static struct of_platform_driver data_of_driver = { static int __init data_init(void) { - return of_register_platform_driver(&data_of_driver); + return platform_driver_register(&data_of_driver); } static void __exit data_exit(void) { - of_unregister_platform_driver(&data_of_driver); + platform_driver_unregister(&data_of_driver); } MODULE_AUTHOR("Ira W. Snyder "); From 5f861ed40200c5c61b698f8d795349112579bcdb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:58:17 -0500 Subject: [PATCH 528/692] powerpc/fsl_udc_core: Fix dumb typo Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt --- drivers/usb/gadget/fsl_udc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b2c44e1d5813..d786ba31fc07 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1717,7 +1717,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) static inline enum usb_device_speed portscx_device_speed(u32 reg) { - switch (speed & PORTSCX_PORT_SPEED_MASK) { + switch (reg & PORTSCX_PORT_SPEED_MASK) { case PORTSCX_PORT_SPEED_HIGH: return USB_SPEED_HIGH; case PORTSCX_PORT_SPEED_FULL: From 82640a6b9166c993104e255b414298cbec6ecd45 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 21:10:29 -0500 Subject: [PATCH 529/692] powerpc/fsl: MCU_MPC8349EMITX wants I2C built-in, modular won't do... Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index e4588721ef34..3fe6d927ad70 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -347,7 +347,7 @@ config SIMPLE_GPIO config MCU_MPC8349EMITX bool "MPC8349E-mITX MCU driver" - depends on I2C && PPC_83xx + depends on I2C=y && PPC_83xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help From bbc24a25e29136a56cf5015ef23eb2c2e8828023 Mon Sep 17 00:00:00 2001 From: Suzuki Poulose Date: Mon, 14 Nov 2011 16:43:50 +0000 Subject: [PATCH 530/692] powerpc/4xx: Fix typos in kexec config dependencies Kexec is not supported on 47x. 47x is a variant of 44x with slightly different MMU and SMP support. There was a typo in the config dependency for kexec. This patch fixes the same. Signed-off-by: Suzuki K. Poulose Signed-off-by: Paul Bolle Cc: Kumar Gala Cc: Josh Boyer Cc: linux ppc dev Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/misc_32.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b177caa56d95..951e18f5335b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f7d760ab5ca1..7cd07b42ca1a 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -738,7 +738,7 @@ relocate_new_kernel: mr r5, r31 li r0, 0 -#elif defined(CONFIG_44x) && !defined(CONFIG_47x) +#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x) /* * Code for setting up 1:1 mapping for PPC440x for KEXEC From 6d1e2c6c1a0b800473db4df8595c95745be548ea Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 14 Nov 2011 12:55:47 +0000 Subject: [PATCH 531/692] powerpc: panic if we can't instantiate RTAS I had to debug a strange situation where all manner of things were failing. SMT threads, storage and network were all completely broken. The root cause was we couldn't find enough memory to instantiate RTAS - this was a network install so the initrd was huge. Instead of limping along and failing in mysterious ways we should just panic up front if RTAS exists and we can't allocate space for it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index b4fa66127495..cc584865b3df 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1579,10 +1579,8 @@ static void __init prom_instantiate_rtas(void) return; base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } + if (base == 0) + prom_panic("Could not allocate memory for RTAS\n"); rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); if (!IHANDLE_VALID(rtas_inst)) { From d715e433b7ad19c02fc4becf0d5e9a59f97925de Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 14 Nov 2011 12:54:47 +0000 Subject: [PATCH 532/692] powerpc: Copy down exception vectors after feature fixups kdump fails because we try to execute an HV only instruction. Feature fixups are being applied after we copy the exception vectors down to 0 so they miss out on any updates. We have always had this issue but it only became critical in v3.0 when we added CFAR support (breaks POWER5) and v3.1 when we added POWERNV (breaks everyone). Signed-off-by: Anton Blanchard Cc: [v3.0+] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/sections.h | 2 +- arch/powerpc/include/asm/synch.h | 1 + arch/powerpc/kernel/kvm.c | 1 - arch/powerpc/kernel/setup_32.c | 2 ++ arch/powerpc/kernel/setup_64.c | 1 + arch/powerpc/lib/feature-fixups.c | 23 +++++++++++++++++++++++ 6 files changed, 28 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 6fbce725c710..a0f358d4a00c 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -8,7 +8,7 @@ #ifdef __powerpc64__ -extern char _end[]; +extern char __end_interrupts[]; static inline int in_kernel_text(unsigned long addr) { diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h index d7cab44643c5..87878c68d1c2 100644 --- a/arch/powerpc/include/asm/synch.h +++ b/arch/powerpc/include/asm/synch.h @@ -13,6 +13,7 @@ extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; extern void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end); +extern void do_final_fixups(void); static inline void eieio(void) { diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 35f27646c4ff..2985338d0e10 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -132,7 +132,6 @@ static void kvm_patch_ins_b(u32 *inst, int addr) /* On relocatable kernels interrupts handlers and our code can be in different regions, so we don't patch them */ - extern u32 __end_interrupts; if ((ulong)inst < (ulong)&__end_interrupts) return; #endif diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c1ce86357ecb..ac7610815113 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -107,6 +107,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) PTRRELOC(&__start___lwsync_fixup), PTRRELOC(&__stop___lwsync_fixup)); + do_final_fixups(); + return KERNELBASE + offset; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1a9dea80a69b..fb9bb46e7e88 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -359,6 +359,7 @@ void __init setup_system(void) &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); do_lwsync_fixups(cur_cpu_spec->cpu_features, &__start___lwsync_fixup, &__stop___lwsync_fixup); + do_final_fixups(); /* * Unflatten the device-tree passed by prom_init or kexec diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 0d08d0171392..7a8a7487cee8 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include struct fixup_entry { @@ -128,6 +130,27 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end) } } +void do_final_fixups(void) +{ +#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE) + int *src, *dest; + unsigned long length; + + if (PHYSICAL_START == 0) + return; + + src = (int *)(KERNELBASE + PHYSICAL_START); + dest = (int *)KERNELBASE; + length = (__end_interrupts - _stext) / sizeof(int); + + while (length--) { + patch_instruction(dest, *src); + src++; + dest++; + } +#endif +} + #ifdef CONFIG_FTR_FIXUP_SELFTEST #define check(x) \ From 2cd76629f6c40f7b227ba7b3885ce10e6ec0face Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 10 Nov 2011 16:04:17 +0000 Subject: [PATCH 533/692] powerpc/trace: Add a dummy stack frame for trace_hardirqs_off The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. If an exception occurs in user mode, there is only one stack frame on the stack and accessing the CALLER_ADDR1 will causes the following call trace. So we create a dummy stack frame to make trace_hardirqs_off happy. WARNING: at kernel/smp.c:459 Modules linked in: NIP: c0093280 LR: c00930a0 CTR: c0010780 REGS: edb87ae0 TRAP: 0700 Not tainted (3.1.0) MSR: 00021002 CR: 28002888 XER: 00000000 TASK = edce2ac0[17658] 'mthread-lock-on' THREAD: edb86000 CPU: 5 GPR00: 00000001 edb87b90 edce2ac0 00000005 c0019594 edb87bd8 00000001 00000fe3 GPR08: 00041000 c084138c 4e20120d edb87b90 48002888 1001aa7c 00000000 00000000 GPR16: 48830000 10012a8c 00000000 10000af4 00000001 c0810000 00000000 00000000 GPR24: ee9aa920 c0816a18 00000000 00000005 c0019594 edb87bd8 ee20178c edb87b90 NIP [c0093280] smp_call_function_many+0x214/0x2b4 LR [c00930a0] smp_call_function_many+0x34/0x2b4 Call Trace: [edb87b90] [c00930a0] smp_call_function_many+0x34/0x2b4 (unreliable) [edb87bd0] [c00194ec] __flush_tlb_page+0xac/0x100 [edb87c00] [c001957c] flush_tlb_page+0x3c/0x54 [edb87c10] [c00180ac] ptep_set_access_flags+0x74/0x12c [edb87c40] [c0128068] handle_pte_fault+0x2f0/0x9ac [edb87cb0] [c0128c3c] handle_mm_fault+0x104/0x1dc [edb87ce0] [c05f40f4] do_page_fault+0x2dc/0x630 [edb87e50] [c001078c] handle_page_fault+0xc/0x80 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 56212bc0ab08..4f80cf1ce77b 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -215,7 +215,22 @@ reenable_mmu: /* re-enable mmu so we can */ stw r9,8(r1) stw r11,12(r1) stw r3,ORIG_GPR3(r1) + /* + * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. + * If from user mode there is only one stack frame on the stack, and + * accessing CALLER_ADDR1 will cause oops. So we need create a dummy + * stack frame to make trace_hardirqs_off happy. + */ + andi. r12,r12,MSR_PR + beq 11f + stwu r1,-16(r1) bl trace_hardirqs_off + addi r1,r1,16 + b 12f + +11: + bl trace_hardirqs_off +12: lwz r0,GPR0(r1) lwz r3,ORIG_GPR3(r1) lwz r4,GPR4(r1) From de1d9248eadd27539eba449b4d09428252e80c04 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 9 Nov 2011 20:39:49 +0000 Subject: [PATCH 534/692] powerpc: Add hvcall.h include to book3s_hv.c If you build with KVM and UP it fails with the following due to a missing include. /arch/powerpc/kvm/book3s_hv.c: In function 'do_h_register_vpa': arch/powerpc/kvm/book3s_hv.c:156:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:156:10: note: each undeclared identifier is reported only once for each function it appears in arch/powerpc/kvm/book3s_hv.c:192:12: error: 'H_RESOURCE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:222:9: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c: In function 'kvmppc_pseries_do_hcall': arch/powerpc/kvm/book3s_hv.c:228:30: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:232:7: error: 'H_CEDE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:234:7: error: 'H_PROD' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:238:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:250:7: error: 'H_CONFER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:252:7: error: 'H_REGISTER_VPA' undeclared (first use in this function) make[2]: *** [arch/powerpc/kvm/book3s_hv.o] Error 1 Signed-off-by: Michael Neuling cc: stable@kernel.org (3.1 only) Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 0cdbc07cec14..0cb137a9b038 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include From 72f3bea075287785ed32b777b6dd2636aa7002e8 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 8 Nov 2011 12:37:26 +0000 Subject: [PATCH 535/692] powerpc/ps3: Fix lost SMP IPIs Fixes the PS3 bootup hang introduced in 3.0-rc1 by: commit 317f394160e9beb97d19a84c39b7e5eb3d7815a sched: Move the second half of ttwu() to the remote cpu Move the PS3's LV1 EOI call lv1_end_of_interrupt_ext() from ps3_chip_eoi() to ps3_get_irq() for IPI messages. If lv1_send_event_locally() is called between a previous call to lv1_send_event_locally() and the coresponding call to lv1_end_of_interrupt_ext() the second event will not be delivered to the target cpu. The PS3's SMP IPIs are implemented using lv1_send_event_locally(), so if two IPI messages of the same type are sent to the same target in a relatively short period of time the second IPI event can become lost when lv1_end_of_interrupt_ext() is called from ps3_chip_eoi(). CC: stable@kernel.org Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/interrupt.c | 23 ++++++++++++++++++++++- arch/powerpc/platforms/ps3/platform.h | 1 + arch/powerpc/platforms/ps3/smp.c | 2 ++ 3 files changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 404bc52b7806..1d6f4f478fe2 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -88,6 +88,7 @@ struct ps3_private { struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN))); u64 ppe_id; u64 thread_id; + unsigned long ipi_mask; }; static DEFINE_PER_CPU(struct ps3_private, ps3_private); @@ -144,7 +145,11 @@ static void ps3_chip_unmask(struct irq_data *d) static void ps3_chip_eoi(struct irq_data *d) { const struct ps3_private *pd = irq_data_get_irq_chip_data(d); - lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq); + + /* non-IPIs are EOIed here. */ + + if (!test_bit(63 - d->irq, &pd->ipi_mask)) + lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq); } /** @@ -691,6 +696,16 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) cpu, virq, pd->bmp.ipi_debug_brk_mask); } +void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq) +{ + struct ps3_private *pd = &per_cpu(ps3_private, cpu); + + set_bit(63 - virq, &pd->ipi_mask); + + DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__, + cpu, virq, pd->ipi_mask); +} + static unsigned int ps3_get_irq(void) { struct ps3_private *pd = &__get_cpu_var(ps3_private); @@ -720,6 +735,12 @@ static unsigned int ps3_get_irq(void) BUG(); } #endif + + /* IPIs are EOIed here. */ + + if (test_bit(63 - plug, &pd->ipi_mask)) + lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug); + return plug; } diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index 9a196a88eda7..1a633ed0fe98 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -43,6 +43,7 @@ void ps3_mm_shutdown(void); void ps3_init_IRQ(void); void ps3_shutdown_IRQ(int cpu); void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq); +void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq); /* smp */ diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index 4c44794faac0..f609345b6c3a 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -94,6 +94,8 @@ static void __init ps3_smp_setup_cpu(int cpu) if (result) virqs[i] = NO_IRQ; + else + ps3_register_ipi_irq(cpu, virqs[i]); } ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); From 7eaf09eefe5b98a530bc5f7b317b9aba1628cf61 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 8 Nov 2011 12:38:21 +0000 Subject: [PATCH 536/692] powerpc/ps3: Fix SMP lockdep boot warning Move the PS3 IPI message setup from ps3_smp_setup_cpu() to ps3_smp_probe(). Fixes startup warnings like these: ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2649 Modules linked in: ... ---[ end trace 31fd0ba7d8756001 ]--- Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/smp.c | 64 ++++++++++++++++---------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index f609345b6c3a..efc1cd8c034a 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -59,48 +59,49 @@ static void ps3_smp_message_pass(int cpu, int msg) static int ps3_smp_probe(void) { - return 2; -} + int cpu; -static void __init ps3_smp_setup_cpu(int cpu) -{ - int result; - unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu); - int i; + for (cpu = 0; cpu < 2; cpu++) { + int result; + unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu); + int i; - DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); + DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); - /* - * Check assumptions on ps3_ipi_virqs[] indexing. If this - * check fails, then a different mapping of PPC_MSG_ - * to index needs to be setup. - */ + /* + * Check assumptions on ps3_ipi_virqs[] indexing. If this + * check fails, then a different mapping of PPC_MSG_ + * to index needs to be setup. + */ - BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0); - BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1); - BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2); - BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); + BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0); + BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1); + BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2); + BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); - for (i = 0; i < MSG_COUNT; i++) { - result = ps3_event_receive_port_setup(cpu, &virqs[i]); + for (i = 0; i < MSG_COUNT; i++) { + result = ps3_event_receive_port_setup(cpu, &virqs[i]); - if (result) - continue; + if (result) + continue; - DBG("%s:%d: (%d, %d) => virq %u\n", - __func__, __LINE__, cpu, i, virqs[i]); + DBG("%s:%d: (%d, %d) => virq %u\n", + __func__, __LINE__, cpu, i, virqs[i]); - result = smp_request_message_ipi(virqs[i], i); + result = smp_request_message_ipi(virqs[i], i); - if (result) - virqs[i] = NO_IRQ; - else - ps3_register_ipi_irq(cpu, virqs[i]); + if (result) + virqs[i] = NO_IRQ; + else + ps3_register_ipi_irq(cpu, virqs[i]); + } + + ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); + + DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); } - ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); - - DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); + return 2; } void ps3_smp_cleanup_cpu(int cpu) @@ -123,7 +124,6 @@ static struct smp_ops_t ps3_smp_ops = { .probe = ps3_smp_probe, .message_pass = ps3_smp_message_pass, .kick_cpu = smp_generic_kick_cpu, - .setup_cpu = ps3_smp_setup_cpu, }; void smp_init_ps3(void) From 3bb9068278ea524581237abadd41377a14717e7d Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 16 Nov 2011 09:21:48 +0100 Subject: [PATCH 537/692] loop: prevent information leak after failed read If read was not fully successful we have to fail whole bio to prevent information leak of old pages ##Testcase_begin dd if=/dev/zero of=./file bs=1M count=1 losetup /dev/loop0 ./file -o 4096 truncate -s 0 ./file # OOps loop offset is now beyond i_size, so read will silently fail. # So bio's pages would not be cleared, may which result in information leak. hexdump -C /dev/loop0 ##testcase_end Signed-off-by: Dmitry Monakhov Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/loop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3d806820280e..0d567397c254 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -372,7 +372,8 @@ do_lo_receive(struct loop_device *lo, if (retval < 0) return retval; - + if (retval != bvec->bv_len) + return -EIO; return 0; } From 0c614e2d3e6ee6ff13c6181f380787cea1d82d1d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 16 Nov 2011 09:21:48 +0100 Subject: [PATCH 538/692] include/linux/bio.h: use a static inline function for bio_integrity_clone() When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings: drivers/md/dm.c: In function 'split_bvec': drivers/md/dm.c:1061:3: warning: statement with no effect drivers/md/dm.c: In function 'clone_bio': drivers/md/dm.c:1088:3: warning: statement with no effect Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- include/linux/bio.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/bio.h b/include/linux/bio.h index a3c071c9e189..d2a3cc23d828 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -519,7 +519,11 @@ extern void bio_integrity_init(void); #define bioset_integrity_create(a, b) (0) #define bio_integrity_prep(a) (0) #define bio_integrity_enabled(a) (0) -#define bio_integrity_clone(a, b, c, d) (0) +static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src, + gfp_t gfp_mask, struct bio_set *bs) +{ + return 0; +} #define bioset_integrity_free(a) do { } while (0) #define bio_integrity_free(a, b) do { } while (0) #define bio_integrity_endio(a, b) do { } while (0) From 7035b5df3c071ccaf2f1694b96bd8958b0eb37ca Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 16 Nov 2011 09:21:49 +0100 Subject: [PATCH 539/692] loop: cleanup set_status interface 1) Anyone who has read access to loopdev has permission to call set_status and may change important parameters such as lo_offset, lo_sizelimit and so on, which contradicts to read access pattern and definitely equals to write access pattern. 2) Add lo_offset over i_size check to prevent blkdev_size overflow. ##Testcase_bagin #dd if=/dev/zero of=./file bs=1k count=1 #losetup /dev/loop0 ./file /* userspace_application */ struct loop_info64 loinf; fd = open("/dev/loop0", O_RDONLY); ioctl(fd, LOOP_GET_STATUS64, &loinf); /* Set offset to any value which is bigger than i_size, and sizelimit * to nonzero value*/ loinf.lo_offset = 4096*1024; loinf.lo_sizelimit = 1024; ioctl(fd, LOOP_SET_STATUS64, &loinf); /* After this loop device will have size similar to 0x7fffffffffxxxx */ #blockdev --getsz /dev/loop0 ##OUTPUT: 36028797018955968 ##Testcase_end [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dmitry Monakhov Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/loop.c | 46 +++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 16 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 0d567397c254..68b205a9338f 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -161,17 +161,19 @@ static struct loop_func_table *xfer_funcs[MAX_LO_CRYPT] = { &xor_funcs }; -static loff_t get_loop_size(struct loop_device *lo, struct file *file) +static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file) { - loff_t size, offset, loopsize; + loff_t size, loopsize; /* Compute loopsize in bytes */ size = i_size_read(file->f_mapping->host); - offset = lo->lo_offset; loopsize = size - offset; - if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize) - loopsize = lo->lo_sizelimit; + /* offset is beyond i_size, wierd but possible */ + if (loopsize < 0) + return 0; + if (sizelimit > 0 && sizelimit < loopsize) + loopsize = sizelimit; /* * Unfortunately, if we want to do I/O on the device, * the number of 512-byte sectors has to fit into a sector_t. @@ -179,17 +181,25 @@ static loff_t get_loop_size(struct loop_device *lo, struct file *file) return loopsize >> 9; } -static int -figure_loop_size(struct loop_device *lo) +static loff_t get_loop_size(struct loop_device *lo, struct file *file) { - loff_t size = get_loop_size(lo, lo->lo_backing_file); + return get_size(lo->lo_offset, lo->lo_sizelimit, file); +} + +static int +figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit) +{ + loff_t size = get_size(offset, sizelimit, lo->lo_backing_file); sector_t x = (sector_t)size; if (unlikely((loff_t)x != size)) return -EFBIG; - + if (lo->lo_offset != offset) + lo->lo_offset = offset; + if (lo->lo_sizelimit != sizelimit) + lo->lo_sizelimit = sizelimit; set_capacity(lo->lo_disk, x); - return 0; + return 0; } static inline int @@ -1059,9 +1069,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) if (lo->lo_offset != info->lo_offset || lo->lo_sizelimit != info->lo_sizelimit) { - lo->lo_offset = info->lo_offset; - lo->lo_sizelimit = info->lo_sizelimit; - if (figure_loop_size(lo)) + if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit)) return -EFBIG; } loop_config_discard(lo); @@ -1247,7 +1255,7 @@ static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev) err = -ENXIO; if (unlikely(lo->lo_state != Lo_bound)) goto out; - err = figure_loop_size(lo); + err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit); if (unlikely(err)) goto out; sec = get_capacity(lo->lo_disk); @@ -1285,13 +1293,19 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode, goto out_unlocked; break; case LOOP_SET_STATUS: - err = loop_set_status_old(lo, (struct loop_info __user *) arg); + err = -EPERM; + if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) + err = loop_set_status_old(lo, + (struct loop_info __user *)arg); break; case LOOP_GET_STATUS: err = loop_get_status_old(lo, (struct loop_info __user *) arg); break; case LOOP_SET_STATUS64: - err = loop_set_status64(lo, (struct loop_info64 __user *) arg); + err = -EPERM; + if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) + err = loop_set_status64(lo, + (struct loop_info64 __user *) arg); break; case LOOP_GET_STATUS64: err = loop_get_status64(lo, (struct loop_info64 __user *) arg); From 0007a4c90a11a5371c8b3f80b220fa402a399189 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 16 Nov 2011 09:21:49 +0100 Subject: [PATCH 540/692] cciss: auto engage SCSI mid layer at driver load time A long time ago, probably in 2002, one of the distros, or maybe more than one, loaded block drivers prior to loading the SCSI mid layer. This meant that the cciss driver, being a block driver, could not engage the SCSI mid layer at init time without panicking, and relied on being poked by a userland program after the system was up (and the SCSI mid layer was therefore present) to engage the SCSI mid layer. This is no longer the case, and cciss can safely rely on the SCSI mid layer being present at init time and engage the SCSI mid layer straight away. This means that users will see their tape drives and medium changers at driver load time without need for a script in /etc/rc.d that does this: for x in /proc/driver/cciss/cciss* do echo "engage scsi" > $x done However, if no tape drives or medium changers are detected, the SCSI mid layer will not be engaged. If a tape drive or medium change is later hot-added to the system it will then be necessary to use the above script or similar for the device(s) to be acceesible. Signed-off-by: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- Documentation/blockdev/cciss.txt | 14 ++++++-------- drivers/block/cciss.c | 1 + drivers/block/cciss_scsi.c | 1 + 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt index 71464e09ec18..b79d0a13e7cd 100644 --- a/Documentation/blockdev/cciss.txt +++ b/Documentation/blockdev/cciss.txt @@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and "SCSI support" in your kernel configuration to be able to use SCSI tape drives with your Smart Array 5xxx controller. -Additionally, note that the driver will not engage the SCSI core at init -time. The driver must be directed to dynamically engage the SCSI core via -the /proc filesystem entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distribution). +Additionally, note that the driver will engage the SCSI core at init +time if any tape drives or medium changers are detected. The driver may +also be directed to dynamically engage the SCSI core via the /proc filesystem +entry which the "block" side of the driver creates as +/proc/driver/cciss/cciss* at runtime. This is best done via a script. + For example: for x in /proc/driver/cciss/cciss[0-9]* diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5b690194dd99..8004ac30a7a8 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -5163,6 +5163,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, h->cciss_max_sectors = 8192; rebuild_lun_table(h, 1, 0); + cciss_engage_scsi(h); h->busy_initializing = 0; return 1; diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 951a4e33b92b..e820b68d2f6c 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1720,5 +1720,6 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) /* If no tape support, then these become defined out of existence */ #define cciss_scsi_setup(cntl_num) +#define cciss_engage_scsi(h) #endif /* CONFIG_CISS_SCSI_TAPE */ From 3540d5e89b2ac268fcfc9b07a50a9ba4acc2e5e5 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: [PATCH 541/692] block: avoid unnecessary plug list flush get_request_wait() could sleep and flush the plug list. If the list is already flushed, don't flush again. Signed-off-by: Shaohua Li Reviewed-by: Namhyung Kim Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index f43c8a5840ae..6403c12f8aad 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1379,15 +1379,17 @@ void blk_queue_bio(struct request_queue *q, struct bio *bio) */ if (list_empty(&plug->list)) trace_block_plug(q); - else if (!plug->should_sort) { - struct request *__rq; + else { + if (!plug->should_sort) { + struct request *__rq; - __rq = list_entry_rq(plug->list.prev); - if (__rq->q != q) - plug->should_sort = 1; + __rq = list_entry_rq(plug->list.prev); + if (__rq->q != q) + plug->should_sort = 1; + } + if (request_count >= BLK_MAX_REQUEST_COUNT) + blk_flush_plug_list(plug, false); } - if (request_count >= BLK_MAX_REQUEST_COUNT) - blk_flush_plug_list(plug, false); list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); } else { From 121f099412bd6576dfb3d94222e89d9341362177 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: [PATCH 542/692] bio: change some signed vars to unsigned This is just a cleanup patch to silence a static checker warning. The problem is that we cap "nr_iovecs" so it can't be larger than "UIO_MAXIOV" but we don't check for negative values. It turns out this is prevented at other layers, but logically it doesn't make sense to have negative nr_iovecs so making it unsigned is nicer. Signed-off-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/bio.c | 7 ++++--- include/linux/bio.h | 4 ++-- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 41c93c722244..b1fe82cf88cf 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -337,7 +337,7 @@ static void bio_fs_destructor(struct bio *bio) * RETURNS: * Pointer to new bio on success, NULL on failure. */ -struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) +struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); @@ -365,7 +365,7 @@ static void bio_kmalloc_destructor(struct bio *bio) * %__GFP_WAIT, the allocation is guaranteed to succeed. * **/ -struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) +struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs) { struct bio *bio; @@ -696,7 +696,8 @@ static void bio_free_map_data(struct bio_map_data *bmd) kfree(bmd); } -static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count, +static struct bio_map_data *bio_alloc_map_data(int nr_segs, + unsigned int iov_count, gfp_t gfp_mask) { struct bio_map_data *bmd; diff --git a/include/linux/bio.h b/include/linux/bio.h index d2a3cc23d828..847994aef0e9 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -211,8 +211,8 @@ extern void bio_pair_release(struct bio_pair *dbio); extern struct bio_set *bioset_create(unsigned int, unsigned int); extern void bioset_free(struct bio_set *); -extern struct bio *bio_alloc(gfp_t, int); -extern struct bio *bio_kmalloc(gfp_t, int); +extern struct bio *bio_alloc(gfp_t, unsigned int); +extern struct bio *bio_kmalloc(gfp_t, unsigned int); extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *); extern void bio_put(struct bio *); extern void bio_free(struct bio *, struct bio_set *); From a2c2a0e668e26e020731ce2a40e6474d1d37210a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: [PATCH 543/692] paride: fix potential information leak in pg_read() Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. i In this case, the pg_write_hdr struct has a hole in it. struct pg_write_hdr { char magic; /* 0 1 */ char func; /* 1 1 */ /* XXX 2 bytes hole, try to pack */ int dlen; /* 4 4 */ Signed-off-by: Dan Carpenter Cc: Tim Waugh Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/paride/pg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 6b9a2000d56a..a79fb4f7ff62 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -630,6 +630,7 @@ static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t if (dev->status & 0x10) return -ETIME; + memset(&hdr, 0, sizeof(hdr)); hdr.magic = PG_MAGIC; hdr.dlen = dev->dlen; copy = 0; From 019ceb7d5d252ce71001a157cf29f4ac28501b72 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: [PATCH 544/692] block: add missed trace_block_plug After flush plug list, the list has no request, so we need to add a trace_block_plug(). Signed-off-by: Shaohua Li Reviewed-by: Namhyung Kim Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index 6403c12f8aad..ea70e6c80cd3 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1387,8 +1387,10 @@ void blk_queue_bio(struct request_queue *q, struct bio *bio) if (__rq->q != q) plug->should_sort = 1; } - if (request_count >= BLK_MAX_REQUEST_COUNT) + if (request_count >= BLK_MAX_REQUEST_COUNT) { blk_flush_plug_list(plug, false); + trace_block_plug(q); + } } list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); From b95d68b8179764e29558b75cec35ef4a6a98925b Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:46 +0800 Subject: [PATCH 545/692] ALSA: hda - fix ELD memory leak memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: Cc: Pierre-louis Bossart Acked-by: Stephen Warren Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 5 +---- sound/pci/hda/hda_local.h | 3 +++ sound/pci/hda/patch_hdmi.c | 11 +++++------ 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 1c8ddf547a2d..a065d6d2d6ff 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -297,10 +297,10 @@ static int hdmi_update_eld(struct hdmi_eld *e, buf + ELD_FIXED_BYTES + mnl + 3 * i); } + e->eld_valid = true; return 0; out_fail: - e->eld_ver = 0; return -EINVAL; } @@ -323,9 +323,6 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld, * ELD is valid, actual eld_size is assigned in hdmi_update_eld() */ - if (!eld->eld_valid) - return -ENOENT; - size = snd_hdmi_get_eld_size(codec, nid); if (size == 0) { /* wfg: workaround for ASUS P5E-VM HDMI board */ diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 6579e0f2bb57..618ddad17236 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -653,6 +653,9 @@ struct hdmi_eld { int spk_alloc; int sad_count; struct cea_sad sad[ELD_MAX_SAD]; + /* + * all fields above eld_buffer will be cleared before updating ELD + */ char eld_buffer[ELD_MAX_SIZE]; #ifdef CONFIG_PROC_FS struct snd_info_entry *proc_entry; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 81b7b791b3c3..aebfee50bd88 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -980,20 +980,19 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, * the unsolicited response to avoid custom WARs. */ int present = snd_hda_pin_sense(codec, pin_nid); + bool eld_valid = false; - memset(eld, 0, sizeof(*eld)); + memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer)); eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); if (eld->monitor_present) - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); - else - eld->eld_valid = 0; + eld_valid = !!(present & AC_PINSENSE_ELDV); printk(KERN_INFO "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, eld->monitor_present, eld->eld_valid); + codec->addr, pin_nid, eld->monitor_present, eld_valid); - if (eld->eld_valid) + if (eld_valid) if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); From 744626dada90cb1231a65b08874aa7a9f11c2ea8 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:47 +0800 Subject: [PATCH 546/692] ALSA: hda - delayed ELD repoll The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index aebfee50bd88..a76139b60154 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -65,7 +65,10 @@ struct hdmi_spec_per_pin { hda_nid_t pin_nid; int num_mux_nids; hda_nid_t mux_nids[HDA_MAX_CONNECTIONS]; + + struct hda_codec *codec; struct hdmi_eld sink_eld; + struct delayed_work work; }; struct hdmi_spec { @@ -745,8 +748,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx, * Unsolicited events */ -static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, - struct hdmi_eld *eld); +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry); static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) { @@ -766,7 +768,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) return; eld = &spec->pins[pin_idx].sink_eld; - hdmi_present_sense(codec, pin_nid, eld); + hdmi_present_sense(&spec->pins[pin_idx], true); /* * HDMI sink's ELD info cannot always be retrieved for now, e.g. @@ -968,9 +970,11 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) return 0; } -static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, - struct hdmi_eld *eld) +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) { + struct hda_codec *codec = per_pin->codec; + struct hdmi_eld *eld = &per_pin->sink_eld; + hda_nid_t pin_nid = per_pin->pin_nid; /* * Always execute a GetPinSense verb here, even when called from * hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited @@ -992,13 +996,27 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", codec->addr, pin_nid, eld->monitor_present, eld_valid); - if (eld_valid) + if (eld_valid) { if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); + else if (retry) { + queue_delayed_work(codec->bus->workq, + &per_pin->work, + msecs_to_jiffies(300)); + } + } snd_hda_input_jack_report(codec, pin_nid); } +static void hdmi_repoll_eld(struct work_struct *work) +{ + struct hdmi_spec_per_pin *per_pin = + container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); + + hdmi_present_sense(per_pin, false); +} + static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) { struct hdmi_spec *spec = codec->spec; @@ -1227,7 +1245,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx) if (err < 0) return err; - hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld); + hdmi_present_sense(per_pin, false); return 0; } @@ -1278,6 +1296,8 @@ static int generic_hdmi_init(struct hda_codec *codec) AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | pin_nid); + per_pin->codec = codec; + INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); snd_hda_eld_proc_new(codec, eld, pin_idx); } return 0; @@ -1292,10 +1312,12 @@ static void generic_hdmi_free(struct hda_codec *codec) struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx]; struct hdmi_eld *eld = &per_pin->sink_eld; + cancel_delayed_work(&per_pin->work); snd_hda_eld_proc_free(codec, eld); } snd_hda_input_jack_free(codec); + flush_workqueue(codec->bus->workq); kfree(spec); } From 2d1b439bdb3cee0ae5ccbd7f65e1e5852b1c2718 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:48 +0800 Subject: [PATCH 547/692] ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld() It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 8 ++++++++ sound/pci/hda/patch_hdmi.c | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index a065d6d2d6ff..7ae7578bdcc0 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -297,6 +297,14 @@ static int hdmi_update_eld(struct hdmi_eld *e, buf + ELD_FIXED_BYTES + mnl + 3 * i); } + /* + * HDMI sink's ELD info cannot always be retrieved for now, e.g. + * in console or for audio devices. Assume the highest speakers + * configuration, to _not_ prohibit multi-channel audio playback. + */ + if (!e->spk_alloc) + e->spk_alloc = 0xffff; + e->eld_valid = true; return 0; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index a76139b60154..9850c5b481ea 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -757,7 +757,6 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) int pd = !!(res & AC_UNSOL_RES_PD); int eldv = !!(res & AC_UNSOL_RES_ELDV); int pin_idx; - struct hdmi_eld *eld; printk(KERN_INFO "HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", @@ -766,17 +765,8 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) pin_idx = pin_nid_to_pin_index(spec, pin_nid); if (pin_idx < 0) return; - eld = &spec->pins[pin_idx].sink_eld; hdmi_present_sense(&spec->pins[pin_idx], true); - - /* - * HDMI sink's ELD info cannot always be retrieved for now, e.g. - * in console or for audio devices. Assume the highest speakers - * configuration, to _not_ prohibit multi-channel audio playback. - */ - if (!eld->spk_alloc) - eld->spk_alloc = 0xffff; } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) From 25d7d59d1f7321be85bda175c9a1bb85ca1b5881 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:52:01 +0100 Subject: [PATCH 548/692] ALSA: hda - Update URLs in document Some stuff was moved from kernel.org to other places. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 03e2771ddeef..91fee3b45fb8 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -579,7 +579,7 @@ Development Tree ~~~~~~~~~~~~~~~~ The latest development codes for HD-audio are found on sound git tree: -- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git The master branch or for-next branches can be used as the main development branches in general while the HD-audio specific patches @@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make install(-modules). See INSTALL in the package. The snapshot tarballs are found at: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ +- ftp://ftp.suse.com/pub/people/tiwai/snapshot/ Sending a Bug Report @@ -696,7 +696,7 @@ via hda-verb won't change the mixer value. The hda-verb program is found in the ftp directory: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ +- ftp://ftp.suse.com/pub/people/tiwai/misc/ Also a git repository is available: @@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc. The package is found in: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ +- ftp://ftp.suse.com/pub/people/tiwai/misc/ A git repository is available: From 499d05ecf990a7a7bbf9e0a273f9969f8ec69efc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 16 Nov 2011 19:34:48 +0800 Subject: [PATCH 549/692] mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Reviewed-by: Neil Brown Reviewed-by: KOSAKI Motohiro Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index a3278f005230..79c34419fadd 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1133,7 +1133,7 @@ static void balance_dirty_pages(struct address_space *mapping, pages_dirtied, pause, start_time); - __set_current_state(TASK_UNINTERRUPTIBLE); + __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); dirty_thresh = hard_dirty_limit(dirty_thresh); @@ -1145,6 +1145,9 @@ static void balance_dirty_pages(struct address_space *mapping, */ if (nr_dirty < dirty_thresh) break; + + if (fatal_signal_pending(current)) + break; } if (!dirty_exceeded && bdi->dirty_exceeded) From 05ee7964a470d29889ac48cc8274c1b5a1904a11 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 18:05:11 +0100 Subject: [PATCH 550/692] ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_cirrus.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 2a2d8645ba09..2fbab8e29576 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -237,6 +237,15 @@ static int cs_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); } +static void cs_update_input_select(struct hda_codec *codec) +{ + struct cs_spec *spec = codec->spec; + if (spec->cur_adc) + snd_hda_codec_write(codec, spec->cur_adc, 0, + AC_VERB_SET_CONNECT_SEL, + spec->adc_idx[spec->cur_input]); +} + /* * Analog capture */ @@ -250,6 +259,7 @@ static int cs_capture_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_adc = spec->adc_nid[spec->cur_input]; spec->cur_adc_stream_tag = stream_tag; spec->cur_adc_format = format; + cs_update_input_select(codec); snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format); return 0; } @@ -689,10 +699,8 @@ static int change_cur_input(struct hda_codec *codec, unsigned int idx, spec->cur_adc_stream_tag, 0, spec->cur_adc_format); } - snd_hda_codec_write(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[idx]); spec->cur_input = idx; + cs_update_input_select(codec); return 1; } @@ -973,10 +981,7 @@ static void cs_automic(struct hda_codec *codec) } else { spec->cur_input = spec->last_input; } - - snd_hda_codec_write_cache(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[spec->cur_input]); + cs_update_input_select(codec); } else { if (present) change_cur_input(codec, spec->automic_idx, 0); @@ -1073,9 +1078,7 @@ static void init_input(struct hda_codec *codec) cs_automic(codec); else { spec->cur_adc = spec->adc_nid[spec->cur_input]; - snd_hda_codec_write(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[spec->cur_input]); + cs_update_input_select(codec); } } else { change_cur_input(codec, spec->cur_input, 1); From cd12909cb576d37311fe35868780e82d5007d0c8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 29 Sep 2011 16:53:32 +0100 Subject: [PATCH 551/692] xen: map foreign pages for shared rings by updating the PTEs directly When mapping a foreign page with xenbus_map_ring_valloc() with the GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and pass a pointer to the PTE (in init_mm). After the page is mapped, the usual fault mechanism can be used to update additional MMs. This allows the vmalloc_sync_all() to be removed from alloc_vm_area(). Signed-off-by: David Vrabel Acked-by: Andrew Morton [v1: Squashed fix by Michal for no-mmu case] Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Michal Simek --- arch/x86/xen/grant-table.c | 2 +- drivers/xen/xenbus/xenbus_client.c | 11 ++++++++--- include/linux/vmalloc.h | 2 +- mm/nommu.c | 2 +- mm/vmalloc.c | 27 +++++++++++++-------------- 5 files changed, 24 insertions(+), 20 deletions(-) diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c index 6bbfd7ac5e81..5a40d24ba331 100644 --- a/arch/x86/xen/grant-table.c +++ b/arch/x86/xen/grant-table.c @@ -71,7 +71,7 @@ int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, if (shared == NULL) { struct vm_struct *area = - alloc_vm_area(PAGE_SIZE * max_nr_gframes); + alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL); BUG_ON(area == NULL); shared = area->addr; *__shared = shared; diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 81c3ce6b8bbe..1906125eab49 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -436,19 +437,20 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn); int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr) { struct gnttab_map_grant_ref op = { - .flags = GNTMAP_host_map, + .flags = GNTMAP_host_map | GNTMAP_contains_pte, .ref = gnt_ref, .dom = dev->otherend_id, }; struct vm_struct *area; + pte_t *pte; *vaddr = NULL; - area = alloc_vm_area(PAGE_SIZE); + area = alloc_vm_area(PAGE_SIZE, &pte); if (!area) return -ENOMEM; - op.host_addr = (unsigned long)area->addr; + op.host_addr = arbitrary_virt_to_machine(pte).maddr; if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1)) BUG(); @@ -527,6 +529,7 @@ int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr) struct gnttab_unmap_grant_ref op = { .host_addr = (unsigned long)vaddr, }; + unsigned int level; /* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr) * method so that we don't have to muck with vmalloc internals here. @@ -548,6 +551,8 @@ int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr) } op.handle = (grant_handle_t)area->phys_addr; + op.host_addr = arbitrary_virt_to_machine( + lookup_address((unsigned long)vaddr, &level)).maddr; if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1)) BUG(); diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 687fb11e2010..4bde182fcf93 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -119,7 +119,7 @@ unmap_kernel_range(unsigned long addr, unsigned long size) #endif /* Allocate/destroy a 'vmalloc' VM area. */ -extern struct vm_struct *alloc_vm_area(size_t size); +extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes); extern void free_vm_area(struct vm_struct *area); /* for /dev/kmem */ diff --git a/mm/nommu.c b/mm/nommu.c index 73419c55eda6..b982290fd962 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -454,7 +454,7 @@ void __attribute__((weak)) vmalloc_sync_all(void) * between processes, it syncs the pagetable across all * processes. */ -struct vm_struct *alloc_vm_area(size_t size) +struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes) { BUG(); return NULL; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index b669aa6f6caf..3231bf332878 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -2141,23 +2141,30 @@ void __attribute__((weak)) vmalloc_sync_all(void) static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data) { - /* apply_to_page_range() does all the hard work. */ + pte_t ***p = data; + + if (p) { + *(*p) = pte; + (*p)++; + } return 0; } /** * alloc_vm_area - allocate a range of kernel address space * @size: size of the area + * @ptes: returns the PTEs for the address space * * Returns: NULL on failure, vm_struct on success * * This function reserves a range of kernel address space, and * allocates pagetables to map that range. No actual mappings - * are created. If the kernel address space is not shared - * between processes, it syncs the pagetable across all - * processes. + * are created. + * + * If @ptes is non-NULL, pointers to the PTEs (in init_mm) + * allocated for the VM area are returned. */ -struct vm_struct *alloc_vm_area(size_t size) +struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes) { struct vm_struct *area; @@ -2171,19 +2178,11 @@ struct vm_struct *alloc_vm_area(size_t size) * of kernel virtual address space and mapped into init_mm. */ if (apply_to_page_range(&init_mm, (unsigned long)area->addr, - area->size, f, NULL)) { + size, f, ptes ? &ptes : NULL)) { free_vm_area(area); return NULL; } - /* - * If the allocated address space is passed to a hypercall - * before being used then we cannot rely on a page fault to - * trigger an update of the page tables. So sync all the page - * tables here. - */ - vmalloc_sync_all(); - return area; } EXPORT_SYMBOL_GPL(alloc_vm_area); From 5f76d7078ce784916d55fc4e1bb0a42985f085a6 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 19 Oct 2011 18:05:27 -0400 Subject: [PATCH 552/692] xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI In 5fbdc10395cd500d6ff844825a918c4e6f38de37 the XEN_PLATFORM_PCI config option was removed, but references in header files remained. Clean up those references. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- include/xen/platform_pci.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h index a785a3b0c8c7..438c256c274b 100644 --- a/include/xen/platform_pci.h +++ b/include/xen/platform_pci.h @@ -29,8 +29,7 @@ static inline int xen_must_unplug_nics(void) { #if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \ defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \ - (defined(CONFIG_XEN_PLATFORM_PCI) || \ - defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + defined(CONFIG_XEN_PVHVM) return 1; #else return 0; @@ -40,8 +39,7 @@ static inline int xen_must_unplug_nics(void) { static inline int xen_must_unplug_disks(void) { #if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \ defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \ - (defined(CONFIG_XEN_PLATFORM_PCI) || \ - defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + defined(CONFIG_XEN_PVHVM) return 1; #else return 0; From 72e9cf2ab12ef3e050577ffebdb0c88a28df821d Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 19 Oct 2011 17:59:37 -0400 Subject: [PATCH 553/692] xen/balloon: Avoid OOM when requesting highmem If highmem pages are requested from the balloon on a system without highmem, the implementation of alloc_xenballooned_pages will allocate all available memory trying to find highmem pages to return. Allow low memory to be returned when highmem pages are requested to avoid this loop. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/balloon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a767884a6c7a..31ab82fda38a 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -501,7 +501,7 @@ EXPORT_SYMBOL_GPL(balloon_set_new_target); * alloc_xenballooned_pages - get pages that have been ballooned out * @nr_pages: Number of pages to get * @pages: pages returned - * @highmem: highmem or lowmem pages + * @highmem: allow highmem pages * @return 0 on success, error otherwise */ int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem) @@ -511,7 +511,7 @@ int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem) mutex_lock(&balloon_mutex); while (pgno < nr_pages) { page = balloon_retrieve(highmem); - if (page && PageHighMem(page) == highmem) { + if (page && (highmem || !PageHighMem(page))) { pages[pgno++] = page; } else { enum bp_state st; From 90d4f5534d14815bd94c10e8ceccc57287657ecc Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Thu, 27 Oct 2011 22:28:59 -0700 Subject: [PATCH 554/692] xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs. PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled need VCPU placement to work, or else it will softlockup. CC: stable@kernel.org Acked-by: Stefano Stabellini Signed-off-by: Zhenzhong Duan Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index da8afd576a6b..1f928659c338 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1356,7 +1356,7 @@ static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self, int cpu = (long)hcpu; switch (action) { case CPU_UP_PREPARE: - per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; + xen_vcpu_setup(cpu); if (xen_have_vector_callback) xen_init_lock_cpu(cpu); break; @@ -1386,7 +1386,6 @@ static void __init xen_hvm_guest_init(void) xen_hvm_smp_init(); register_cpu_notifier(&xen_hvm_cpu_notifier); xen_unplug_emulated_devices(); - have_vcpu_info_placement = 0; x86_init.irqs.intr_init = xen_init_IRQ; xen_hvm_init_time_ops(); xen_hvm_init_mmu_ops(); From fc6e0c3b909157748ce1c0c0f2a9935a5ee3c812 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:23:32 +0300 Subject: [PATCH 555/692] xen-gntdev: integer overflow in gntdev_alloc_map() The multiplications here can overflow resulting in smaller buffer sizes than expected. "count" comes from a copy_from_user(). Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 39871326afa2..afca14d9042e 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -114,11 +114,11 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) if (NULL == add) return NULL; - add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL); - add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL); - add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL); - add->kmap_ops = kzalloc(sizeof(add->kmap_ops[0]) * count, GFP_KERNEL); - add->pages = kzalloc(sizeof(add->pages[0]) * count, GFP_KERNEL); + add->grants = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL); + add->map_ops = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL); + add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL); + add->kmap_ops = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL); + add->pages = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL); if (NULL == add->grants || NULL == add->map_ops || NULL == add->unmap_ops || From 21643e69a4c06f7ef155fbc70e3fba13fba4a756 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:24:08 +0300 Subject: [PATCH 556/692] xen-gntalloc: integer overflow in gntalloc_ioctl_alloc() On 32 bit systems a high value of op.count could lead to an integer overflow in the kzalloc() and gref_ids would be smaller than expected. If the you triggered another integer overflow in "if (gref_size + op.count > limit)" then you'd probably get memory corruption inside add_grefs(). CC: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c index f6832f46aea4..23c60cf4313e 100644 --- a/drivers/xen/gntalloc.c +++ b/drivers/xen/gntalloc.c @@ -280,7 +280,7 @@ static long gntalloc_ioctl_alloc(struct gntalloc_file_private_data *priv, goto out; } - gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY); + gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY); if (!gref_ids) { rc = -ENOMEM; goto out; From 99cb2ddcc617f43917e94a4147aa3ccdb2bcd77e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:24:36 +0300 Subject: [PATCH 557/692] xen-gntalloc: signedness bug in add_grefs() gref->gref_id is unsigned so the error handling didn't work. gnttab_grant_foreign_access() returns an int type, so we can add a cast here, and it doesn't cause any problems. gnttab_grant_foreign_access() can return a variety of errors including -ENOSPC, -ENOSYS and -ENOMEM. CC: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c index 23c60cf4313e..e1c4c6e5b469 100644 --- a/drivers/xen/gntalloc.c +++ b/drivers/xen/gntalloc.c @@ -135,7 +135,7 @@ static int add_grefs(struct ioctl_gntalloc_alloc_gref *op, /* Grant foreign access to the page. */ gref->gref_id = gnttab_grant_foreign_access(op->domid, pfn_to_mfn(page_to_pfn(gref->page)), readonly); - if (gref->gref_id < 0) { + if ((int)gref->gref_id < 0) { rc = gref->gref_id; goto undo; } From f4a0d5abef14562c37dee5a1d49180f494106230 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Mon, 24 Oct 2011 08:17:42 -0400 Subject: [PATCH 558/692] encrypted-keys: fix error return code Fix request_master_key() error return code. Signed-off-by: Mimi Zohar --- security/keys/encrypted-keys/encrypted.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index dcc843cb0f80..41144f71d615 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -444,7 +444,7 @@ static struct key *request_master_key(struct encrypted_key_payload *epayload, goto out; if (IS_ERR(mkey)) { - int ret = PTR_ERR(epayload); + int ret = PTR_ERR(mkey); if (ret == -ENOTSUPP) pr_info("encrypted_key: key %s not supported", From 9c69898783a0121399ec078d40d4ccc00e3cb0df Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Sun, 16 Oct 2011 19:17:48 -0400 Subject: [PATCH 559/692] encrypted-keys: module build fixes Encrypted keys are encrypted/decrypted using either a trusted or user-defined key type, which is referred to as the 'master' key. The master key may be of type trusted iff the trusted key is builtin or both the trusted key and encrypted keys are built as modules. This patch resolves the build dependency problem. - Use "masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS)" construct to encapsulate the above logic. (Suggested by Dimtry Kasatkin.) - Fixing the encrypted-keys Makefile, results in a module name change from encrypted.ko to encrypted-keys.ko. - Add module dependency for request_trusted_key() definition Signed-off-by: Mimi Zohar --- security/keys/encrypted-keys/Makefile | 8 ++++++-- security/keys/encrypted-keys/encrypted.h | 3 ++- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/security/keys/encrypted-keys/Makefile b/security/keys/encrypted-keys/Makefile index 6bc7a86d1027..d6f8433250a5 100644 --- a/security/keys/encrypted-keys/Makefile +++ b/security/keys/encrypted-keys/Makefile @@ -2,5 +2,9 @@ # Makefile for encrypted keys # -obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o -obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o +obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o + +encrypted-keys-y := encrypted.o ecryptfs_format.o +masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o +masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o +encrypted-keys-y += $(masterkey-y) $(masterkey-m-m) diff --git a/security/keys/encrypted-keys/encrypted.h b/security/keys/encrypted-keys/encrypted.h index b6ade8945250..8136a2d44c63 100644 --- a/security/keys/encrypted-keys/encrypted.h +++ b/security/keys/encrypted-keys/encrypted.h @@ -2,7 +2,8 @@ #define __ENCRYPTED_KEY_H #define ENCRYPTED_DEBUG 0 -#ifdef CONFIG_TRUSTED_KEYS +#if defined(CONFIG_TRUSTED_KEYS) || \ + (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE)) extern struct key *request_trusted_key(const char *trusted_desc, u8 **master_key, size_t *master_keylen); #else From f9849100851b28c8ad83e86d68d5110497a4e9d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 16 Nov 2011 11:52:12 +0000 Subject: [PATCH 560/692] watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() Reported-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wm831x_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 7be38556aed0..e789a47db41f 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -150,7 +150,7 @@ static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev, if (wm831x_wdt_cfgs[i].time == timeout) break; if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) - ret = -EINVAL; + return -EINVAL; ret = wm831x_reg_unlock(wm831x); if (ret == 0) { From 20403e845f9988446c5b48024ff4d0c3a5929f7d Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Wed, 16 Nov 2011 12:46:13 +0400 Subject: [PATCH 561/692] watchdog: fix initialisation printout in s3c2410_wdt Looks like a typo creeped in, and driver prints s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled instead of s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled Also it may completely disinform about irq status, as it prints "irq enabled" when S3C2410_WTCON_INTEN is in fact 0. Fix it. Signed-off-by: Dmitry Artamonow Tested-by: Thomas Abraham Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 5de7e4fa5b8a..a79e3840782a 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -401,8 +401,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n", (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", - (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", - (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); + (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis", + (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis"); return 0; From 8d514bbf37eecf0a3e309284728637816a36764b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 16:06:09 -0500 Subject: [PATCH 562/692] btrfs: fix double mntput() in mount_subvol() Signed-off-by: Al Viro --- fs/btrfs/super.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 8bd9d6d0e07a..969a7747e889 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -861,7 +861,6 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, if (!is_subvolume_inode(path.dentry->d_inode)) { path_put(&path); - mntput(mnt); error = -EINVAL; printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n", subvol_name); From c13344958780b4046305ee6235d686c846535529 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 16:12:14 -0500 Subject: [PATCH 563/692] switch create_mnt_ns() to saner calling conventions, fix double mntput() in nfs Life is much saner if create_mnt_ns(mnt) drops mnt in case of error... Switch it to such calling conventions, switch callers, fix double mntput() in fs/nfs/super.c one. Signed-off-by: Al Viro --- fs/btrfs/super.c | 4 +--- fs/namespace.c | 2 ++ fs/nfs/super.c | 23 ++++++++--------------- 3 files changed, 11 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 969a7747e889..cfbedd7755b0 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -843,10 +843,8 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, return ERR_CAST(mnt); ns_private = create_mnt_ns(mnt); - if (IS_ERR(ns_private)) { - mntput(mnt); + if (IS_ERR(ns_private)) return ERR_CAST(ns_private); - } /* * This will trigger the automount of the subvol so we can just diff --git a/fs/namespace.c b/fs/namespace.c index e5e1c7d1839b..aea4b7689840 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2483,6 +2483,8 @@ struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) __mnt_make_longterm(mnt); new_ns->root = mnt; list_add(&new_ns->list, &new_ns->root->mnt_list); + } else { + mntput(mnt); } return new_ns; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 480b3b6bf71e..46d69f38fd55 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2794,22 +2794,21 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, int ret; ns_private = create_mnt_ns(root_mnt); - ret = PTR_ERR(ns_private); if (IS_ERR(ns_private)) - goto out_mntput; + return ERR_CAST(ns_private); ret = nfs_referral_loop_protect(); - if (ret != 0) - goto out_put_mnt_ns; + if (ret == 0) { + ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, + export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, + &path); + nfs_referral_loop_unprotect(); + } - ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); - - nfs_referral_loop_unprotect(); put_mnt_ns(ns_private); if (ret != 0) - goto out_err; + return ERR_PTR(ret); s = path.mnt->mnt_sb; atomic_inc(&s->s_active); @@ -2818,12 +2817,6 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, path_put(&path); down_write(&s->s_umount); return dentry; -out_put_mnt_ns: - put_mnt_ns(ns_private); -out_mntput: - mntput(root_mnt); -out_err: - return ERR_PTR(ret); } static struct dentry *nfs4_try_mount(int flags, const char *dev_name, From 709e8697af1c86772c1a6fccda6d4b0e2e226547 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 14 Nov 2011 10:56:56 +0000 Subject: [PATCH 564/692] tcp: clear xmit timers in tcp_v4_syn_recv_sock() Simon Kirby reported divides by zero errors in __tcp_select_window() This happens when inet_csk_route_child_sock() returns a NULL pointer : We free new socket while we eventually armed keepalive timer in tcp_create_openreq_child() Fix this by a call to tcp_clear_xmit_timers() [ This is a followup to commit 918eb39962dff (net: add missing bh_unlock_sock() calls) ] Reported-by: Simon Kirby Signed-off-by: Eric Dumazet Tested-by: Simon Kirby Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a7443159c400..a9db4b1a2215 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1510,6 +1510,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb, NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS); return NULL; put_and_exit: + tcp_clear_xmit_timers(newsk); bh_unlock_sock(newsk); sock_put(newsk); goto exit; From 6cc31d09bedeb6f25951b18c23b6aee5df0a242c Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 15 Nov 2011 02:31:12 +0000 Subject: [PATCH 565/692] qeth: return with -EPERM if sniffing is not enabled Without appropriate configuration at the SE, a HiperSockets device cannot be used for sniffing. Setting the sniffer attribute is rejected with -EPERM. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_sys.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 0ea2fbfe0e99..d979bb26522f 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -335,10 +335,10 @@ static ssize_t qeth_l3_dev_sniffer_store(struct device *dev, QETH_IN_BUF_COUNT_MAX) qeth_realloc_buffer_pool(card, QETH_IN_BUF_COUNT_MAX); - break; } else rc = -EPERM; - default: /* fall through */ + break; + default: rc = -EINVAL; } out: From 7c01a8e56bf8a03b9b50a770de36abfee03c4fc5 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 15 Nov 2011 02:31:13 +0000 Subject: [PATCH 566/692] qeth: remove WARN_ON leftover The patch "qeth: exploit asynchronous delivery of storage blocks" added a WARN_ON in qeth_schedule_recovery. A device recovery should not cause a kernel warning. This is obviously a debugging left-over that we forgot to remove. Signed-off-by: Christian Borntraeger Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 81534437373a..fff57de78943 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -881,7 +881,6 @@ EXPORT_SYMBOL_GPL(qeth_do_run_thread); void qeth_schedule_recovery(struct qeth_card *card) { QETH_CARD_TEXT(card, 2, "startrec"); - WARN_ON(1); if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0) schedule_work(&card->kernel_thread_starter); } From 1d503563f7601a249d015d3fad40b08e8d6a394b Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 15 Nov 2011 02:31:14 +0000 Subject: [PATCH 567/692] netiucv: reinsert dev_alloc_name for device naming Invocation of dev_alloc_name() is re-inserted, because the created net_device name is used to create the device name for the iucv bus. This device is created before the register_netdev call. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/netiucv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 3251333a23df..b6a6356d09b3 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -1994,6 +1994,8 @@ static struct net_device *netiucv_init_netdevice(char *username) netiucv_setup_netdevice); if (!dev) return NULL; + if (dev_alloc_name(dev, dev->name) < 0) + goto out_netdev; privptr = netdev_priv(dev); privptr->fsm = init_fsm("netiucvdev", dev_state_names, From 1d36cb479f204a0fedc1a3e7ce7b32c0a2c48769 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Tue, 15 Nov 2011 02:31:15 +0000 Subject: [PATCH 568/692] qeth: l3 fix rcu splat in xmit when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index e4c1176ee25b..4d5307ddbe55 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2756,11 +2756,13 @@ int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb) struct neighbour *n = NULL; struct dst_entry *dst; + rcu_read_lock(); dst = skb_dst(skb); if (dst) n = dst_get_neighbour(dst); if (n) { cast_type = n->type; + rcu_read_unlock(); if ((cast_type == RTN_BROADCAST) || (cast_type == RTN_MULTICAST) || (cast_type == RTN_ANYCAST)) @@ -2768,6 +2770,8 @@ int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb) else return RTN_UNSPEC; } + rcu_read_unlock(); + /* try something else */ if (skb->protocol == ETH_P_IPV6) return (skb_network_header(skb)[24] == 0xff) ? @@ -2847,6 +2851,8 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, } hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr); + + rcu_read_lock(); dst = skb_dst(skb); if (dst) n = dst_get_neighbour(dst); @@ -2893,6 +2899,7 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, QETH_CAST_UNICAST | QETH_HDR_PASSTHRU; } } + rcu_read_unlock(); } static inline void qeth_l3_hdr_csum(struct qeth_card *card, From 0284a0fdf3def1beb4de509f87472520b23883c9 Mon Sep 17 00:00:00 2001 From: Einar Lueck Date: Tue, 15 Nov 2011 02:31:16 +0000 Subject: [PATCH 569/692] qeth: Reduce CPU consumption through less SIGA-r calls Patch avoids SIGA-r calls in case of SIGA-r required. It only calls SIGA-r if a threshold of free buffer is reached. CPU consumption is reduced as a consequence. Signed-off-by: Einar Lueck Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index b77c65ed1381..4abc79d3963f 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -236,8 +236,7 @@ static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, #define QETH_IN_BUF_COUNT_MAX 128 #define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12) #define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \ - ((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \ - ((card)->qdio.in_buf_pool.buf_count / 2)) + ((card)->qdio.in_buf_pool.buf_count / 2) /* buffers we have to be behind before we get a PCI */ #define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1) From fa2da8cdae1dd64f78fc915ca1d1a4a93c71e7cb Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Tue, 15 Nov 2011 08:09:14 +0000 Subject: [PATCH 570/692] bridge: correct IPv6 checksum after pull Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. When bytes are removed from skb, the computed checksum needs to be adjusted. Signed-off-by: Stephen Hemminger Tested-by: Martin Volf Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 2eefe275b338..a5f4e5769809 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1501,6 +1501,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, __skb_pull(skb2, offset); skb_reset_transport_header(skb2); + skb_postpull_rcsum(skb2, skb_network_header(skb2), + skb_network_header_len(skb2)); icmp6_type = icmp6_hdr(skb2)->icmp6_type; From eccab1ec87d093d5104e6aade674223b5b625d39 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 15 Nov 2011 09:36:30 +0000 Subject: [PATCH 571/692] net/cadence: enable by default NET_ATMEL so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 98849a1fc749..b48378a41e49 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -7,6 +7,7 @@ config HAVE_NET_MACB config NET_ATMEL bool "Atmel devices" + default y depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200) ---help--- If you have a network (Ethernet) card belonging to this class, say Y. From eb2afd4a622985eaccfa8c7fc83e890b8930e0ab Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 15 Nov 2011 12:07:33 +0000 Subject: [PATCH 572/692] bnx2x: cache-in compressed fw image Re-request fw from fs may fail for different reasons, once the fw was loaded we won't release it until driver is removed. This also resolves the boot problem when initial fw is located on initrd, but rootfs is still unavailable, in this case device reset will fail due to absence of fw files. Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 50 +++++++++++-------- .../net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 15 +++--- 2 files changed, 35 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6486ab8c8fc8..2f6361e949f0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10548,33 +10548,38 @@ do { \ int bnx2x_init_firmware(struct bnx2x *bp) { - const char *fw_file_name; struct bnx2x_fw_file_hdr *fw_hdr; int rc; - if (CHIP_IS_E1(bp)) - fw_file_name = FW_FILE_NAME_E1; - else if (CHIP_IS_E1H(bp)) - fw_file_name = FW_FILE_NAME_E1H; - else if (!CHIP_IS_E1x(bp)) - fw_file_name = FW_FILE_NAME_E2; - else { - BNX2X_ERR("Unsupported chip revision\n"); - return -EINVAL; - } - BNX2X_DEV_INFO("Loading %s\n", fw_file_name); + if (!bp->firmware) { + const char *fw_file_name; - rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); - if (rc) { - BNX2X_ERR("Can't load firmware file %s\n", fw_file_name); - goto request_firmware_exit; - } + if (CHIP_IS_E1(bp)) + fw_file_name = FW_FILE_NAME_E1; + else if (CHIP_IS_E1H(bp)) + fw_file_name = FW_FILE_NAME_E1H; + else if (!CHIP_IS_E1x(bp)) + fw_file_name = FW_FILE_NAME_E2; + else { + BNX2X_ERR("Unsupported chip revision\n"); + return -EINVAL; + } + BNX2X_DEV_INFO("Loading %s\n", fw_file_name); - rc = bnx2x_check_firmware(bp); - if (rc) { - BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); - goto request_firmware_exit; + rc = request_firmware(&bp->firmware, fw_file_name, + &bp->pdev->dev); + if (rc) { + BNX2X_ERR("Can't load firmware file %s\n", + fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } } fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; @@ -10630,6 +10635,7 @@ static void bnx2x_release_firmware(struct bnx2x *bp) kfree(bp->init_ops); kfree(bp->init_data); release_firmware(bp->firmware); + bp->firmware = NULL; } @@ -10925,6 +10931,8 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) if (bp->doorbells) iounmap(bp->doorbells); + bnx2x_release_firmware(bp); + bnx2x_free_mem_bp(bp); free_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 0440425c83d6..14517691f8db 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -5380,7 +5380,7 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, rc = drv->init_fw(bp); if (rc) { BNX2X_ERR("Error loading firmware\n"); - goto fw_init_err; + goto init_err; } /* Handle the beginning of COMMON_XXX pases separatelly... */ @@ -5388,25 +5388,25 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: rc = bnx2x_func_init_cmn_chip(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_COMMON: rc = bnx2x_func_init_cmn(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_PORT: rc = bnx2x_func_init_port(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_FUNCTION: rc = bnx2x_func_init_func(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; default: @@ -5414,10 +5414,7 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, rc = -EINVAL; } -init_hw_err: - drv->release_fw(bp); - -fw_init_err: +init_err: drv->gunzip_end(bp); /* In case of success, complete the comand immediatelly: no ramrods From 5e773fdc535cf3f4fa8023fe2ce20dcf774dae8a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 15 Nov 2011 13:56:14 +0000 Subject: [PATCH 573/692] pch_gbe: Move #include of module.h The first #include must be pch_gbe.h as it does a #define of pr_fmt. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 9c075ea2682e..9cb5f912e489 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -18,8 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ -#include /* for __MODULE_STRING */ #include "pch_gbe.h" +#include /* for __MODULE_STRING */ #define OPTION_UNSET -1 #define OPTION_DISABLED 0 From 377a4673147d0144cf4951bf91f4c867a2c18e5e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 16 Nov 2011 17:58:46 -0500 Subject: [PATCH 574/692] MAINTAINERS: change email address for shemminger My old email account at linux-foundation is no longer usable after the LF breakin. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256446f2..aa11a574e74e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2576,7 +2576,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4462,7 +4462,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c @@ -5977,7 +5977,7 @@ S: Maintained F: drivers/usb/misc/sisusbvga/ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* From 0d2f096b8785b67c38afcf6e1fbb9674af2e05ca Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Wed, 16 Nov 2011 10:50:56 -0800 Subject: [PATCH 575/692] random: Fix handing of arch_get_random_long in get_random_bytes() If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by: Tony Luck Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/4ec4061010261a4cb0@agluck-desktop.sc.intel.com Signed-off-by: H. Peter Anvin --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 63e19ba56bbe..6035ab8d5ef7 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -941,7 +941,7 @@ void get_random_bytes(void *buf, int nbytes) if (!arch_get_random_long(&v)) break; - memcpy(buf, &v, chunk); + memcpy(p, &v, chunk); p += chunk; nbytes -= chunk; } From bbc13ab9d26f4ff675775dd7dc24d5cae17b85d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 16 Nov 2011 06:00:08 +0000 Subject: [PATCH 576/692] r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list We are checking whether the MCR0_HASHEN bit is set using a logical and instead of bitwise and, fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/rdc/r6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index 1fc01ca72b46..4bf68cfef390 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -940,7 +940,7 @@ static void r6040_multicast_list(struct net_device *dev) iowrite16(lp->mcr0, ioaddr + MCR0); /* Fill the MAC hash tables with their values */ - if (lp->mcr0 && MCR0_HASH_EN) { + if (lp->mcr0 & MCR0_HASH_EN) { iowrite16(hash_table[0], ioaddr + MAR0); iowrite16(hash_table[1], ioaddr + MAR1); iowrite16(hash_table[2], ioaddr + MAR2); From 1401a8008a09e079236261be37e98847c799760a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:55 +0000 Subject: [PATCH 577/692] sky2: fix hang on shutdown (and other irq issues) There are several problems with recent change to how IRQ's are setup. * synchronize_irq in sky2_shutdown would hang because there was no IRQ setup. * when device was set to down, some IRQ bits left enabled so a hardware error would produce IRQ with no handler * quick link on Optima chip set was enabled without handler * suspend/resume would leave IRQ on with no handler if device was down Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 45 +++++++++++++++++------------ 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index fdc6c394c683..f9c4529299bd 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1747,6 +1747,11 @@ static int sky2_up(struct net_device *dev) sky2_hw_up(sky2); + if (hw->chip_id == CHIP_ID_YUKON_OPT || + hw->chip_id == CHIP_ID_YUKON_PRM || + hw->chip_id == CHIP_ID_YUKON_OP_2) + imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */ + /* Enable interrupts from phy/mac for port */ imask = sky2_read32(hw, B0_IMSK); imask |= portirq_msk[port]; @@ -2101,15 +2106,21 @@ static int sky2_down(struct net_device *dev) netif_info(sky2, ifdown, dev, "disabling interface\n"); - /* Disable port IRQ */ - sky2_write32(hw, B0_IMSK, - sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]); - sky2_read32(hw, B0_IMSK); - if (hw->ports == 1) { + sky2_write32(hw, B0_IMSK, 0); + sky2_read32(hw, B0_IMSK); + napi_disable(&hw->napi); free_irq(hw->pdev->irq, hw); } else { + u32 imask; + + /* Disable port IRQ */ + imask = sky2_read32(hw, B0_IMSK); + imask &= ~portirq_msk[sky2->port]; + sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); + synchronize_irq(hw->pdev->irq); napi_synchronize(&hw->napi); } @@ -3258,7 +3269,6 @@ static void sky2_reset(struct sky2_hw *hw) hw->chip_id == CHIP_ID_YUKON_PRM || hw->chip_id == CHIP_ID_YUKON_OP_2) { u16 reg; - u32 msk; if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */ @@ -3281,11 +3291,6 @@ static void sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); - /* enable PHY Quick Link */ - msk = sky2_read32(hw, B0_IMSK); - msk |= Y2_IS_PHY_QLNK; - sky2_write32(hw, B0_IMSK, msk); - /* check if PSMv2 was running before */ reg = sky2_pci_read16(hw, PSM_CONFIG_REG3); if (reg & PCI_EXP_LNKCTL_ASPMC) @@ -3412,7 +3417,9 @@ static void sky2_all_down(struct sky2_hw *hw) sky2_read32(hw, B0_IMSK); sky2_write32(hw, B0_IMSK, 0); - synchronize_irq(hw->pdev->irq); + + if (hw->ports > 1 || netif_running(hw->dev[0])) + synchronize_irq(hw->pdev->irq); napi_disable(&hw->napi); for (i = 0; i < hw->ports; i++) { @@ -3430,7 +3437,7 @@ static void sky2_all_down(struct sky2_hw *hw) static void sky2_all_up(struct sky2_hw *hw) { - u32 imask = Y2_IS_BASE; + u32 imask = 0; int i; for (i = 0; i < hw->ports; i++) { @@ -3446,11 +3453,13 @@ static void sky2_all_up(struct sky2_hw *hw) netif_wake_queue(dev); } - sky2_write32(hw, B0_IMSK, imask); - sky2_read32(hw, B0_IMSK); - - sky2_read32(hw, B0_Y2_SP_LISR); - napi_enable(&hw->napi); + if (imask || hw->ports > 1) { + imask |= Y2_IS_BASE; + sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); + sky2_read32(hw, B0_Y2_SP_LISR); + napi_enable(&hw->napi); + } } static void sky2_restart(struct work_struct *work) From f9687c44d322ca1bcbc362c8a54084425fda3ab8 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:56 +0000 Subject: [PATCH 578/692] sky2: pci posting issues A couple of the reset and setup paths have possible PCI posting issues. When setting registers, a read is necessary to force the writes to complete. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index f9c4529299bd..98ad38a5588f 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -869,6 +869,7 @@ static void sky2_wol_init(struct sky2_port *sky2) /* block receiver */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + sky2_read32(hw, B0_CTST); } static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) @@ -2045,6 +2046,8 @@ static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + + sky2_read32(hw, B0_CTST); } static void sky2_hw_down(struct sky2_port *sky2) From 926d0977b28793533a99ec66484385b5f602e9c8 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:57 +0000 Subject: [PATCH 579/692] sky2: rename up/down functions The code is clearer if the up/down functions are renamed to open/close like other drivers. Purely syntax change. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 98ad38a5588f..98d435a187b1 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1728,7 +1728,7 @@ static int sky2_setup_irq(struct sky2_hw *hw, const char *name) /* Bring up network interface. */ -static int sky2_up(struct net_device *dev) +static int sky2_open(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; @@ -2098,7 +2098,7 @@ static void sky2_hw_down(struct sky2_port *sky2) } /* Network shutdown */ -static int sky2_down(struct net_device *dev) +static int sky2_close(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; @@ -2601,7 +2601,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) if (netif_running(dev)) { sky2_tx_complete(sky2, last); - /* Wake unless it's detached, and called e.g. from sky2_down() */ + /* Wake unless it's detached, and called e.g. from sky2_close() */ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } @@ -3391,7 +3391,7 @@ static void sky2_detach(struct net_device *dev) netif_tx_lock(dev); netif_device_detach(dev); /* stop txq */ netif_tx_unlock(dev); - sky2_down(dev); + sky2_close(dev); } } @@ -3401,7 +3401,7 @@ static int sky2_reattach(struct net_device *dev) int err = 0; if (netif_running(dev)) { - err = sky2_up(dev); + err = sky2_open(dev); if (err) { netdev_info(dev, "could not restart %d\n", err); dev_close(dev); @@ -4568,7 +4568,7 @@ static int sky2_device_event(struct notifier_block *unused, struct net_device *dev = ptr; struct sky2_port *sky2 = netdev_priv(dev); - if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug) + if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug) return NOTIFY_DONE; switch (event) { @@ -4633,8 +4633,8 @@ static __exit void sky2_debug_cleanup(void) not allowing netpoll on second port */ static const struct net_device_ops sky2_netdev_ops[2] = { { - .ndo_open = sky2_up, - .ndo_stop = sky2_down, + .ndo_open = sky2_open, + .ndo_stop = sky2_close, .ndo_start_xmit = sky2_xmit_frame, .ndo_do_ioctl = sky2_ioctl, .ndo_validate_addr = eth_validate_addr, @@ -4650,8 +4650,8 @@ static const struct net_device_ops sky2_netdev_ops[2] = { #endif }, { - .ndo_open = sky2_up, - .ndo_stop = sky2_down, + .ndo_open = sky2_open, + .ndo_stop = sky2_close, .ndo_start_xmit = sky2_xmit_frame, .ndo_do_ioctl = sky2_ioctl, .ndo_validate_addr = eth_validate_addr, From b1cb82566242fbb54d5c655e23995a8f7bd37ecf Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:58 +0000 Subject: [PATCH 580/692] sky2: reduce default Tx ring size The default Tx ring size for the sky2 driver is quite large and could cause excess buffer bloat for many users. The minimum ring size possible and still allow handling the worst case packet on 64bit platforms is 38 which gets rounded up to a power of 2. But most packets only require a couple of ring elements. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 98d435a187b1..3777fb348b86 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -68,7 +68,7 @@ #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1)) #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) #define TX_MAX_PENDING 1024 -#define TX_DEF_PENDING 127 +#define TX_DEF_PENDING 63 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 From 00427a7387a1c91ddb6b69e50916173d8aca66e0 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:59 +0000 Subject: [PATCH 581/692] sky2: used fixed RSS key Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 3777fb348b86..48c9e1281c7e 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1275,6 +1275,14 @@ static void rx_set_checksum(struct sky2_port *sky2) ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } +/* + * Fixed initial key as seed to RSS. + */ +static const uint32_t rss_init_key[10] = { + 0x7c3351da, 0x51c5cf4e, 0x44adbdd1, 0xe8d38d18, 0x48897c43, + 0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30 +}; + /* Enable/disable receive hash calculation (RSS) */ static void rx_set_rss(struct net_device *dev, u32 features) { @@ -1290,12 +1298,9 @@ static void rx_set_rss(struct net_device *dev, u32 features) /* Program RSS initial values */ if (features & NETIF_F_RXHASH) { - u32 key[nkeys]; - - get_random_bytes(key, nkeys * sizeof(u32)); for (i = 0; i < nkeys; i++) sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4), - key[i]); + rss_init_key[i]); /* Need to turn on (undocumented) flag to make hashing work */ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), From d9fa7c86f1fca60693beea187c963cfda4a54a06 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:43:00 +0000 Subject: [PATCH 582/692] sky2: version 1.30 Update version number. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 48c9e1281c7e..539de09cffc9 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.29" +#define DRV_VERSION "1.30" /* * The Yukon II chipset takes 64 bit command blocks (called list elements) From ea441d1104cf1efb471fa81bc91e9fd1e6ae29fd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 21:43:59 -0500 Subject: [PATCH 583/692] new helper: mount_subtree() takes vfsmount and relative path, does lookup within that vfsmount (possibly triggering automounts) and returns the result as root of subtree suitable for return by ->mount() (i.e. a reference to dentry and an active reference to its superblock grabbed, superblock locked exclusive). btrfs and nfs switched to it instead of open-coding the sucker. Signed-off-by: Al Viro --- fs/btrfs/super.c | 35 ++++++----------------------------- fs/namespace.c | 28 ++++++++++++++++++++++++++++ fs/nfs/super.c | 30 ++++++------------------------ include/linux/fs.h | 1 + 4 files changed, 41 insertions(+), 53 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index cfbedd7755b0..17ee7fc5e64e 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -825,13 +825,9 @@ static char *setup_root_args(char *args) static struct dentry *mount_subvol(const char *subvol_name, int flags, const char *device_name, char *data) { - struct super_block *s; struct dentry *root; struct vfsmount *mnt; - struct mnt_namespace *ns_private; char *newargs; - struct path path; - int error; newargs = setup_root_args(data); if (!newargs) @@ -842,36 +838,17 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, if (IS_ERR(mnt)) return ERR_CAST(mnt); - ns_private = create_mnt_ns(mnt); - if (IS_ERR(ns_private)) - return ERR_CAST(ns_private); + root = mount_subtree(mnt, subvol_name); - /* - * This will trigger the automount of the subvol so we can just - * drop the mnt we have here and return the dentry that we - * found. - */ - error = vfs_path_lookup(mnt->mnt_root, mnt, subvol_name, - LOOKUP_FOLLOW, &path); - put_mnt_ns(ns_private); - if (error) - return ERR_PTR(error); - - if (!is_subvolume_inode(path.dentry->d_inode)) { - path_put(&path); - error = -EINVAL; + if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) { + struct super_block *s = root->d_sb; + dput(root); + root = ERR_PTR(-EINVAL); + deactivate_locked_super(s); printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n", subvol_name); - return ERR_PTR(-EINVAL); } - /* Get a ref to the sb and the dentry we found and return it */ - s = path.mnt->mnt_sb; - atomic_inc(&s->s_active); - root = dget(path.dentry); - path_put(&path); - down_write(&s->s_umount); - return root; } diff --git a/fs/namespace.c b/fs/namespace.c index aea4b7689840..50ee30345b4f 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2490,6 +2490,34 @@ struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) } EXPORT_SYMBOL(create_mnt_ns); +struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) +{ + struct mnt_namespace *ns; + struct path path; + int err; + + ns = create_mnt_ns(mnt); + if (IS_ERR(ns)) + return ERR_CAST(ns); + + err = vfs_path_lookup(mnt->mnt_root, mnt, + name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); + + put_mnt_ns(ns); + + if (err) + return ERR_PTR(err); + + /* trade a vfsmount reference for active sb one */ + atomic_inc(&path.mnt->mnt_sb->s_active); + mntput(path.mnt); + /* lock the sucker */ + down_write(&path.mnt->mnt_sb->s_umount); + /* ... and return the root of (sub)tree on it */ + return path.dentry; +} +EXPORT_SYMBOL(mount_subtree); + SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name, char __user *, type, unsigned long, flags, void __user *, data) { diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 46d69f38fd55..134777406ee3 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2787,35 +2787,17 @@ static void nfs_referral_loop_unprotect(void) static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, const char *export_path) { - struct mnt_namespace *ns_private; - struct super_block *s; struct dentry *dentry; - struct path path; - int ret; + int ret = nfs_referral_loop_protect(); - ns_private = create_mnt_ns(root_mnt); - if (IS_ERR(ns_private)) - return ERR_CAST(ns_private); - - ret = nfs_referral_loop_protect(); - if (ret == 0) { - ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, - &path); - nfs_referral_loop_unprotect(); + if (ret) { + mntput(root_mnt); + return ERR_PTR(ret); } - put_mnt_ns(ns_private); + dentry = mount_subtree(root_mnt, export_path); + nfs_referral_loop_unprotect(); - if (ret != 0) - return ERR_PTR(ret); - - s = path.mnt->mnt_sb; - atomic_inc(&s->s_active); - dentry = dget(path.dentry); - - path_put(&path); - down_write(&s->s_umount); return dentry; } diff --git a/include/linux/fs.h b/include/linux/fs.h index 0c4df261af7e..e3130220ce3e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1886,6 +1886,7 @@ extern struct dentry *mount_single(struct file_system_type *fs_type, extern struct dentry *mount_nodev(struct file_system_type *fs_type, int flags, void *data, int (*fill_super)(struct super_block *, void *, int)); +extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path); void generic_shutdown_super(struct super_block *sb); void kill_block_super(struct super_block *sb); void kill_anon_super(struct super_block *sb); From 832dd3c17f7829fe8e4c257531d6c5c9e19bd7ac Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:34:06 -0700 Subject: [PATCH 584/692] drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control Every usage of PCH_PP_CONTROL sets the PANEL_UNLOCK_REGS value to ensure that writes will be respected, move this to a common function to make the driver cleaner. No functional changes. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 37 +++++++++++++++++---------------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7259034b33d1..efe5f9e0de9e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -906,6 +906,19 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp) msleep(delay); } +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv) +{ + u32 control = I915_READ(PCH_PP_CONTROL); + + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; @@ -926,9 +939,7 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) } ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -951,9 +962,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1012,9 +1021,7 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) return; ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1049,9 +1056,7 @@ static void ironlake_edp_panel_off(struct drm_encoder *encoder) if (!is_edp(intel_dp)) return; - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1098,9 +1103,7 @@ static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) * allowing it to appear. */ msleep(intel_dp->backlight_on_delay); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1116,9 +1119,7 @@ static void ironlake_edp_backlight_off(struct intel_dp *intel_dp) return; DRM_DEBUG_KMS("\n"); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); From 93f62dad5ffe0962d83772fd16c0c1a9dd69767d Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:45:03 -0700 Subject: [PATCH 585/692] drm/i915: Remove link_status field from intel_dp structure No persistent data was ever stored here, so link_status is instead allocated on the stack as needed. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 65 ++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index efe5f9e0de9e..2c0c482222e1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -58,7 +58,6 @@ struct intel_dp { struct i2c_algo_dp_aux_data algo; bool is_pch_edp; uint8_t train_set[4]; - uint8_t link_status[DP_LINK_STATUS_SIZE]; int panel_power_up_delay; int panel_power_down_delay; int panel_power_cycle_delay; @@ -1285,11 +1284,11 @@ intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, * link status information */ static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { return intel_dp_aux_native_read_retry(intel_dp, DP_LANE0_1_STATUS, - intel_dp->link_status, + link_status, DP_LINK_STATUS_SIZE); } @@ -1301,27 +1300,25 @@ intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], } static uint8_t -intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_voltage(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; } static uint8_t -intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; } @@ -1362,15 +1359,18 @@ intel_dp_pre_emphasis_max(uint8_t voltage_swing) } static void -intel_get_adjust_train(struct intel_dp *intel_dp) +intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { + struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; + uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); + int voltage_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { - uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane); - uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane); if (this_v > v) v = this_v; @@ -1389,7 +1389,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(uint8_t train_set, int lane_count) +intel_dp_signal_levels(uint8_t train_set) { uint32_t signal_levels = 0; @@ -1458,9 +1458,8 @@ static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) { - int i = DP_LANE0_1_STATUS + (lane >> 1); int s = (lane & 1) * 4; - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = link_status[lane>>1]; return (l >> s) & 0xf; } @@ -1485,18 +1484,18 @@ intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count DP_LANE_CHANNEL_EQ_DONE|\ DP_LANE_SYMBOL_LOCKED) static bool -intel_channel_eq_ok(struct intel_dp *intel_dp) +intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { uint8_t lane_align; uint8_t lane_status; int lane; - lane_align = intel_dp_link_status(intel_dp->link_status, + lane_align = intel_dp_link_status(link_status, DP_LANE_ALIGN_STATUS_UPDATED); if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) return false; for (lane = 0; lane < intel_dp->lane_count; lane++) { - lane_status = intel_get_lane_status(intel_dp->link_status, lane); + lane_status = intel_get_lane_status(link_status, lane); if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) return false; } @@ -1569,12 +1568,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; if (IS_GEN6(dev) && is_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1590,10 +1591,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Set training pattern 1 */ udelay(100); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; + } - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("clock recovery OK\n"); clock_recovery = true; break; } @@ -1615,7 +1619,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); } intel_dp->DP = DP; @@ -1638,6 +1642,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; if (cr_tries > 5) { DRM_ERROR("failed to train DP, aborting\n"); @@ -1649,7 +1654,8 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1665,17 +1671,17 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; udelay(400); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) break; /* Make sure clock is still ok */ - if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { intel_dp_start_link_train(intel_dp); cr_tries++; continue; } - if (intel_channel_eq_ok(intel_dp)) { + if (intel_channel_eq_ok(intel_dp, link_status)) { channel_eq = true; break; } @@ -1690,7 +1696,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) } /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); ++tries; } @@ -1822,6 +1828,7 @@ static void intel_dp_check_link_status(struct intel_dp *intel_dp) { u8 sink_irq_vector; + u8 link_status[DP_LINK_STATUS_SIZE]; if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1830,7 +1837,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp)) { + if (!intel_dp_get_link_status(intel_dp, link_status)) { intel_dp_link_down(intel_dp); return; } @@ -1855,7 +1862,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } - if (!intel_channel_eq_ok(intel_dp)) { + if (!intel_channel_eq_ok(intel_dp, link_status)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", drm_get_encoder_name(&intel_dp->base.base)); intel_dp_start_link_train(intel_dp); From 417e822deee1d2bcd8a8a60660c40a0903713f2b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:54:11 -0700 Subject: [PATCH 586/692] drm/i915: Treat PCH eDP like DP in most places PCH eDP has many of the same needs as regular PCH DP connections, including the DP_CTl bit settings, the TRANS_DP_CTL register. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_display.c | 3 +- drivers/gpu/drm/i915/intel_dp.c | 103 ++++++++++++++++++--------- 2 files changed, 72 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 591eb0ed3110..e77a863a3833 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c0c482222e1..d1eabd4165c4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { lane_count = intel_dp->lane_count; break; - } else if (is_edp(intel_dp)) { + } else if (is_cpu_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; break; } @@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, ironlake_edp_pll_off(encoder); } - intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - intel_dp->DP |= intel_dp->color_range; + /* + * There are three kinds of DP registers: + * + * IBX PCH + * CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; + /* Handle DP bits in common between all three register formats */ + + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; switch (intel_dp->lane_count) { case 1: @@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); intel_dp->link_configuration[0] = intel_dp->link_bw; intel_dp->link_configuration[1] = intel_dp->lane_count; intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; - /* * Check for DPCD version > 1.1 and enhanced framing support */ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; + if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } @@ -1341,6 +1368,7 @@ static char *link_train_names[] = { * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ #define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 +#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t intel_dp_pre_emphasis_max(uint8_t voltage_swing) @@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + voltage_max = I830_DP_VOLTAGE_MAX_CPT; + else + voltage_max = I830_DP_VOLTAGE_MAX; + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; if (p >= intel_dp_pre_emphasis_max(v)) p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; @@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { + + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_edp(intel_dp)) { + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + if (is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } if (!HAS_PCH_CPT(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; } From 99ea7127a30bda29354e1ed3a75d80d5f9cfc2a7 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:57:50 -0700 Subject: [PATCH 587/692] drm/i915: Let panel power sequencing hardware do its job The panel power sequencing hardware tracks the stages of panel power sequencing and signals when the panel is completely on or off. Instead of blindly assuming the panel timings will work, poll the panel power status register until it shows the correct values. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 17 +++- drivers/gpu/drm/i915/intel_dp.c | 145 +++++++++++++++++--------------- 2 files changed, 89 insertions(+), 73 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index a34e86630f26..b080cc824001 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1553,12 +1553,21 @@ */ #define PP_READY (1 << 30) #define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 +#define PP_SEQUENCE_POWER_UP (1 << 28) +#define PP_SEQUENCE_POWER_DOWN (2 << 28) +#define PP_SEQUENCE_MASK (3 << 28) +#define PP_SEQUENCE_SHIFT 28 #define PP_CYCLE_DELAY_ACTIVE (1 << 27) -#define PP_SEQUENCE_STATE_ON_IDLE (1 << 3) #define PP_SEQUENCE_STATE_MASK 0x0000000f +#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) +#define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) +#define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) +#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) +#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) +#define PP_SEQUENCE_STATE_RESET (0xf << 0) #define PP_CONTROL 0x61204 #define POWER_TARGET_ON (1 << 0) #define PP_ON_DELAYS 0x61208 diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d1eabd4165c4..56106101d3f8 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -66,7 +66,6 @@ struct intel_dp { struct drm_display_mode *panel_fixed_mode; /* for eDP */ struct delayed_work panel_vdd_work; bool want_panel_vdd; - unsigned long panel_off_jiffies; }; /** @@ -906,32 +905,53 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void ironlake_wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) +{ + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", + mask, value, + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); + + if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) { + DRM_ERROR("Panel status timeout: status %08x control %08x\n", + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); + } +} + +static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power on\n"); + ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); +} + static void ironlake_wait_panel_off(struct intel_dp *intel_dp) { - unsigned long off_time; - unsigned long delay; - DRM_DEBUG_KMS("Wait for panel power off time\n"); - - if (ironlake_edp_have_panel_power(intel_dp) || - ironlake_edp_have_panel_vdd(intel_dp)) - { - DRM_DEBUG_KMS("Panel still on, no delay needed\n"); - return; - } - - off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay); - if (time_after(jiffies, off_time)) { - DRM_DEBUG_KMS("Time already passed"); - return; - } - delay = jiffies_to_msecs(off_time - jiffies); - if (delay > intel_dp->panel_power_down_delay) - delay = intel_dp->panel_power_down_delay; - DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay); - msleep(delay); + ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); } +static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power cycle\n"); + ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + + /* Read the current pp_control value, unlocking the register if it * is locked */ @@ -959,12 +979,15 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) "eDP VDD already requested on\n"); intel_dp->want_panel_vdd = true; + if (ironlake_edp_have_panel_vdd(intel_dp)) { DRM_DEBUG_KMS("eDP VDD already on\n"); return; } - ironlake_wait_panel_off(intel_dp); + if (!ironlake_edp_have_panel_power(intel_dp)) + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); @@ -996,7 +1019,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) /* Make sure sequencer is idle before allowing subsequent activity */ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n", I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL)); - intel_dp->panel_off_jiffies = jiffies; + + msleep(intel_dp->panel_power_down_delay); } } @@ -1034,21 +1058,25 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) } } -/* Returns true if the panel was already on when called */ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; + u32 pp; if (!is_edp(intel_dp)) return; - if (ironlake_edp_have_panel_power(intel_dp)) + + DRM_DEBUG_KMS("Turn eDP power on\n"); + + if (ironlake_edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP power already on\n"); return; + } + + ironlake_wait_panel_power_cycle(intel_dp); - ironlake_wait_panel_off(intel_dp); pp = ironlake_get_pp_control(dev_priv); - if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ pp &= ~PANEL_POWER_RESET; @@ -1057,13 +1085,13 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } pp |= POWER_TARGET_ON; + if (!IS_GEN5(dev)) + pp |= PANEL_POWER_RESET; + I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, - 5000)) - DRM_ERROR("panel on wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + ironlake_wait_panel_on(intel_dp); if (IS_GEN5(dev)) { pp |= PANEL_POWER_RESET; /* restore panel reset bit */ @@ -1072,44 +1100,25 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } } -static void ironlake_edp_panel_off(struct drm_encoder *encoder) +static void ironlake_edp_panel_off(struct intel_dp *intel_dp) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK | - PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK; + u32 pp; if (!is_edp(intel_dp)) return; + + DRM_DEBUG_KMS("Turn eDP power off\n"); + + WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n"); + pp = ironlake_get_pp_control(dev_priv); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); + I915_WRITE(PCH_PP_CONTROL, pp); + POSTING_READ(PCH_PP_CONTROL); - if (IS_GEN5(dev)) { - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } - - intel_dp->panel_off_jiffies = jiffies; - - if (IS_GEN5(dev)) { - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - msleep(intel_dp->panel_power_cycle_delay); - - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000)) - DRM_ERROR("panel off wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); - - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } + ironlake_wait_panel_off(intel_dp); } static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) @@ -1223,7 +1232,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder) */ ironlake_edp_backlight_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1237,7 +1246,6 @@ static void intel_dp_commit(struct drm_encoder *encoder) intel_dp_start_link_train(intel_dp); ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); @@ -1261,7 +1269,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); @@ -2398,11 +2406,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay; - ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); + if (ret) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) dev_priv->no_aux_handshake = From 21264c638b4f9179655a39436d0340bd0d4ab1de Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:25:21 -0700 Subject: [PATCH 588/692] drm/i915: Make DP prepare/commit consistent with DP dpms Make sure the sequence of operations in all three functions makes sense: 1) The backlight must be off unless the screen is running 2) The link must be running to turn the eDP panel on/off 3) The CPU eDP PLL must be running until everything is off Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 56106101d3f8..8e37fdd1fa2f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1222,17 +1222,18 @@ static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + /* Wake up the sink first */ ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_link_down(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); /* Make sure the panel is off before trying to * change the mode */ - ironlake_edp_backlight_off(intel_dp); - intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1264,16 +1265,20 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) uint32_t dp_reg = I915_READ(intel_dp->output_reg); if (mode != DRM_MODE_DPMS_ON) { + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + ironlake_edp_panel_vdd_on(intel_dp); - if (is_edp(intel_dp)) - ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) - ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); + + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_off(encoder); } else { + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_on(encoder); + ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { @@ -1281,7 +1286,6 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); - ironlake_edp_backlight_on(intel_dp); } else ironlake_edp_panel_vdd_off(intel_dp, false); ironlake_edp_backlight_on(intel_dp); From cdb0e95bf571dccc1f75fef9bdad21b167ef0b37 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:00:06 -0700 Subject: [PATCH 589/692] drm/i915: Try harder during dp pattern 1 link training Instead of going through the sequence just once, run through the whole set up to 5 times to see if something can work. This isn't part of the DP spec, but the BIOS seems to do it, and given that link training failure is so bad, it seems reasonable to follow suit. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8e37fdd1fa2f..7101b8b4f8b4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1581,7 +1581,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int i; uint8_t voltage; bool clock_recovery = false; - int tries; + int voltage_tries, loop_tries; u32 reg; uint32_t DP = intel_dp->DP; @@ -1608,7 +1608,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP &= ~DP_LINK_TRAIN_MASK; memset(intel_dp->train_set, 0, 4); voltage = 0xff; - tries = 0; + voltage_tries = 0; + loop_tries = 0; clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ @@ -1651,16 +1652,26 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; - if (i == intel_dp->lane_count) - break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_DEBUG_KMS("too many full retries, give up\n"); + break; + } + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } /* Check to see if we've tried the same voltage 5 times */ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) + ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); break; + } } else - tries = 0; + voltage_tries = 0; voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ From f2e8b18af95358cf5407bf263cba04fc4c379123 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:01:35 -0700 Subject: [PATCH 590/692] drm/i915: Remove trailing white space Found a couple of bare tabs in intel_dp.c Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7101b8b4f8b4..7bdf77e79798 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1042,7 +1042,7 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd); WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); - + intel_dp->want_panel_vdd = false; if (sync) { @@ -2388,7 +2388,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> PANEL_LIGHT_ON_DELAY_SHIFT; - + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> PANEL_LIGHT_OFF_DELAY_SHIFT; From b34f1f0931575bf1e1483472a5202b8247fa9b10 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 10:17:59 -0700 Subject: [PATCH 591/692] drm/i915: Initiate DP link training only on the lanes we'll be using Limit the link training setting command to the lanes needed for the current mode. It seems vaguely possible that a monitor will try to train the other lanes and fail in some way, so this seems like the safer plan. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7bdf77e79798..8c3819b02a7f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1564,8 +1564,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count) return false; return true; From 9a10f401a401ca69c6537641c8fc0d6b57b5aee8 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 13:03:47 -0700 Subject: [PATCH 592/692] drm/i915: Use DPCD value for max DP lanes. The BIOS VBT value for an eDP panel has been shown to be incorrect on one machine, and we haven't found any machines where the DPCD value was wrong, so we'll use the DPCD value everywhere. Signed-off-by: Keith Packard Reviewed-by: Adam Jackson Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_dp.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8c3819b02a7f..ec28aebf5147 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -154,16 +154,12 @@ intel_edp_link_config(struct intel_encoder *intel_encoder, static int intel_dp_max_lane_count(struct intel_dp *intel_dp) { - int max_lane_count = 4; - - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { - max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; - switch (max_lane_count) { - case 1: case 2: case 4: - break; - default: - max_lane_count = 4; - } + int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; } return max_lane_count; } @@ -765,12 +761,11 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) + { lane_count = intel_dp->lane_count; break; - } else if (is_cpu_edp(intel_dp)) { - lane_count = dev_priv->edp.lanes; - break; } } From ba28c9aae26ef7f3651eef6835fae30a979f88ba Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:38 +0000 Subject: [PATCH 593/692] powerpc: Revert show_regs() define for readability We had an existing ifdef for 4xx & BOOKE processors that got changed to CONFIG_PPC_ADV_DEBUG_REGS. The define has nothing to do with CONFIG_PPC_ADV_DEBUG_REGS. The define really should be: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) and not #ifdef CONFIG_PPC_ADV_DEBUG_REGS Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 9054ca9ab4f9..ad3612af0a04 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -657,7 +657,7 @@ void show_regs(struct pt_regs * regs) if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) printk("CFAR: "REG"\n", regs->orig_gpr3); if (trap == 0x300 || trap == 0x600) -#ifdef CONFIG_PPC_ADV_DEBUG_REGS +#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr); #else printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr); From b95bc2191412f5ecf2781c966110a13fa82a80d3 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:39 +0000 Subject: [PATCH 594/692] powerpc: Remove extraneous CONFIG_PPC_ADV_DEBUG_REGS define All of DebugException is already protected by CONFIG_PPC_ADV_DEBUG_REGS there is no need to have another such ifdef inside the function. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/traps.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 4e5908264d1a..5459d148a0f6 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1298,14 +1298,12 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) if (user_mode(regs)) { current->thread.dbcr0 &= ~DBCR0_IC; -#ifdef CONFIG_PPC_ADV_DEBUG_REGS if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM bit is off */ current->thread.dbcr0 &= ~DBCR0_IDM; -#endif } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); From 187b9f2aa769198daa7cf8054abb65a08b8d8b47 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:40 +0000 Subject: [PATCH 595/692] powerpc/book3e-64: Fix debug support for userspace With the introduction of CONFIG_PPC_ADV_DEBUG_REGS user space debug is broken on Book-E 64-bit parts that support delayed debug events. When switch_booke_debug_regs() sets DBCR0 we'll start getting debug events as MSR_DE is also set and we aren't able to handle debug events from kernel space. We can remove the hack that always enables MSR_DE and loads up DBCR0 and just utilize switch_booke_debug_regs() to get user space debug working again. We still need to handle critical/debug exception stacks & proper save/restore of state for those exception levles to support debug events from kernel space like we have on 32-bit. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg_booke.h | 2 +- arch/powerpc/kernel/process.c | 22 ---------------------- 2 files changed, 1 insertion(+), 23 deletions(-) diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 28cdbd9f399c..03c48e819c8e 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -31,7 +31,7 @@ #define MSR_ MSR_ME | MSR_CE #define MSR_KERNEL MSR_ | MSR_64BIT -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE #define MSR_USER64 MSR_USER32 | MSR_64BIT #elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ad3612af0a04..6457574c0b2f 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -486,28 +486,6 @@ struct task_struct *__switch_to(struct task_struct *prev, new_thread = &new->thread; old_thread = ¤t->thread; -#if defined(CONFIG_PPC_BOOK3E_64) - /* XXX Current Book3E code doesn't deal with kernel side DBCR0, - * we always hold the user values, so we set it now. - * - * However, we ensure the kernel MSR:DE is appropriately cleared too - * to avoid spurrious single step exceptions in the kernel. - * - * This will have to change to merge with the ppc32 code at some point, - * but I don't like much what ppc32 is doing today so there's some - * thinking needed there - */ - if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) { - u32 dbcr0; - - mtmsr(mfmsr() & ~MSR_DE); - isync(); - dbcr0 = mfspr(SPRN_DBCR0); - dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0; - mtspr(SPRN_DBCR0, dbcr0); - } -#endif /* CONFIG_PPC64_BOOK3E */ - #ifdef CONFIG_PPC64 /* * Collect processor utilization data per process From a9a8f77ac72d6dd3c92ea268291678836f77681c Mon Sep 17 00:00:00 2001 From: Kyle Moffett Date: Mon, 7 Nov 2011 13:30:43 +0000 Subject: [PATCH 596/692] powerpc: Remove buggy 9-year-old test for binutils < 2.12.1 Recent binutils refuses to assemble AltiVec opcodes when in e500/SPE mode, as some of those opcodes alias the "SPE" instructions. This triggers an ancient binutils version check even when building a kernel with CONFIG_ALTIVEC disabled. In theory, the check could be conditionalized on CONFIG_ALTIVEC, but in practice it has long outlived its utility. It is virtually impossible to find binutils older than 2.12.1 (released 2002) in the wild anymore. Even ancient RedHat Enterprise Linux 4 has binutils-2.14. To fix the kernel build when done natively on e500 systems with this new binutils, the test is simply removed. Signed-off-by: Kyle Moffett Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Makefile | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 57af16edc192..70ba0c0a1223 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -255,12 +255,6 @@ checkbin: echo 'disable kernel modules' ; \ false ; \ fi - @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \ - echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \ - echo 'correctly with old versions of binutils.' ; \ - echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \ - false ; \ - fi CLEAN_FILES += $(TOUT) From b97021f85517552ea8a0d2c1680c1ee4beab6d14 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2011 17:11:27 +0000 Subject: [PATCH 597/692] powerpc: Fix atomic_xxx_return barrier semantics The Documentation/memory-barriers.txt document requires that atomic operations that return a value act as a memory barrier both before and after the actual atomic operation. Our current implementation doesn't guarantee this. More specifically, while a load following the isync can not be issued before stwcx. has completed, that completion doesn't architecturally means that the result of stwcx. is visible to other processors (or any previous stores for that matter) (typically, the other processors L1 caches can still hold the old value). This has caused an actual crash in RCU torture testing on Power 7 This fixes it by changing those atomic ops to use new macros instead of RELEASE/ACQUIRE barriers, called ATOMIC_ENTRY and ATMOIC_EXIT barriers, which are then defined respectively to lwsync and sync. I haven't had a chance to measure the performance impact (or rather what I measured with kernel compiles is in the noise, I yet have to find a more precise benchmark) Signed-off-by: Benjamin Herrenschmidt Acked-by: Paul E. McKenney --- arch/powerpc/include/asm/atomic.h | 48 +++++++++++++++---------------- arch/powerpc/include/asm/bitops.h | 12 ++++---- arch/powerpc/include/asm/futex.h | 7 +++-- arch/powerpc/include/asm/synch.h | 8 ++++-- 4 files changed, 40 insertions(+), 35 deletions(-) diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index e2a4c26ad377..02e41b53488d 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%2 # atomic_add_return\n\ add %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%2 # atomic_sub_return\n\ subf %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_inc_return\n\ addic %0,%0,1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_dec_return\n\ addic %0,%0,-1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -194,7 +194,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) int t; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # __atomic_add_unless\n\ cmpw 0,%0,%3 \n\ beq- 2f \n\ @@ -202,7 +202,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) PPC405_ERR77(0,%2) " stwcx. %0,0,%1 \n\ bne- 1b \n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) @@ -226,7 +226,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ cmpwi %0,1\n\ addi %0,%0,-1\n\ @@ -234,7 +234,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "\n\ 2:" : "=&b" (t) : "r" (&v->counter) @@ -285,12 +285,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%2 # atomic64_add_return\n\ add %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -319,12 +319,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%2 # atomic64_sub_return\n\ subf %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -351,12 +351,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_inc_return\n\ addic %0,%0,1\n\ stdcx. %0,0,%1 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -393,12 +393,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_return\n\ addic %0,%0,-1\n\ stdcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -418,13 +418,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ addic. %0,%0,-1\n\ blt- 2f\n\ stdcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "\n\ 2:" : "=&r" (t) : "r" (&v->counter) @@ -450,14 +450,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) long t; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # __atomic_add_unless\n\ cmpd 0,%0,%3 \n\ beq- 2f \n\ add %0,%2,%0 \n" " stdcx. %0,0,%1 \n\ bne- 1b \n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index e137afcc10fa..efdc92618b38 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -124,14 +124,14 @@ static __inline__ unsigned long fn( \ return (old & mask); \ } -DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) DEFINE_TESTOP(test_and_set_bits_lock, or, "", PPC_ACQUIRE_BARRIER, 1) -DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) -DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) +DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h index c94e4a3fe2ef..2a9cf845473b 100644 --- a/arch/powerpc/include/asm/futex.h +++ b/arch/powerpc/include/asm/futex.h @@ -11,12 +11,13 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ __asm__ __volatile ( \ - PPC_RELEASE_BARRIER \ + PPC_ATOMIC_ENTRY_BARRIER \ "1: lwarx %0,0,%2\n" \ insn \ PPC405_ERR77(0, %2) \ "2: stwcx. %1,0,%2\n" \ "bne- 1b\n" \ + PPC_ATOMIC_EXIT_BARRIER \ "li %1,0\n" \ "3: .section .fixup,\"ax\"\n" \ "4: li %1,%3\n" \ @@ -92,14 +93,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\ cmpw 0,%1,%4\n\ bne- 3f\n" PPC405_ERR77(0,%3) "2: stwcx. %5,0,%3\n\ bne- 1b\n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "3: .section .fixup,\"ax\"\n\ 4: li %0,%6\n\ b 3b\n\ diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h index 87878c68d1c2..e682a7143edb 100644 --- a/arch/powerpc/include/asm/synch.h +++ b/arch/powerpc/include/asm/synch.h @@ -42,11 +42,15 @@ static inline void isync(void) START_LWSYNC_SECTION(97); \ isync; \ MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup); -#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) -#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" +#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) +#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" +#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n" +#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n" #else #define PPC_ACQUIRE_BARRIER #define PPC_RELEASE_BARRIER +#define PPC_ATOMIC_ENTRY_BARRIER +#define PPC_ATOMIC_EXIT_BARRIER #endif #endif /* __KERNEL__ */ From a313f4c55d4952f2105fe33a4957ed858e998359 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 8 Nov 2011 04:51:19 +0000 Subject: [PATCH 598/692] powerpc/signal32: Fix sigset_t conversion when copying to user On PPC64, put_sigset_t converts a sigset_t to a compat_sigset_t before copying it to userspace. There is a typo in the case that we have 4 words to copy, meaning that we corrupt the compat_sigset_t. It appears that _NSIG_WORDS can't be greater than 2 at the moment so this code is probably always optimised away anyway. Signed-off-by: Will Deacon Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/signal_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 78b76dc54dfb..836a5a19eb2c 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -97,7 +97,7 @@ static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) compat_sigset_t cset; switch (_NSIG_WORDS) { - case 4: cset.sig[5] = set->sig[3] & 0xffffffffull; + case 4: cset.sig[6] = set->sig[3] & 0xffffffffull; cset.sig[7] = set->sig[3] >> 32; case 3: cset.sig[4] = set->sig[2] & 0xffffffffull; cset.sig[5] = set->sig[2] >> 32; From ff956135008bca99b5e38f48f0d10a2c04fef2d6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 15 Nov 2011 21:00:56 -0600 Subject: [PATCH 599/692] [libata] ahci_platform: fix DT probing The change in commit 904c04feaf13ed "ahci_platform: Add the board_ids..." doesn't work for the DT probing case as platform_get_device_id returns NULL. Pick the default ahci_port_info in this case. Signed-off-by: Rob Herring Acked-by: Anton Vorontsov Cc: Richard Zhu Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index ec555951176e..43b875810d1b 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -67,7 +67,7 @@ static int __init ahci_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); - struct ata_port_info pi = ahci_port_info[id->driver_data]; + struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ahci_host_priv *hpriv; struct ata_host *host; From aab9440453d19c1885fa391d4aafd7705f316247 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 13 Nov 2011 01:30:56 +0400 Subject: [PATCH 600/692] libata: fix build without BMDMA fix these errors: drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function 'ata_pci_bmdma_prepare_host' drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt' undeclared (first use in this function) Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 63d53277d6a9..4cadfa28f940 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2533,10 +2533,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, if (rc) goto out; +#ifdef CONFIG_ATA_BMDMA if (bmdma) /* prepare and activate BMDMA host */ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); else +#endif /* prepare and activate SFF host */ rc = ata_pci_sff_prepare_host(pdev, ppi, &host); if (rc) @@ -2544,10 +2546,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, host->private_data = host_priv; host->flags |= hflags; +#ifdef CONFIG_ATA_BMDMA if (bmdma) { pci_set_master(pdev); rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); } else +#endif rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) From bbc1754639f771cd2b515fed39b977549b373034 Mon Sep 17 00:00:00 2001 From: Francesco Virlinzi Date: Wed, 16 Nov 2011 21:57:58 +0000 Subject: [PATCH 601/692] stmmac: use mdelay on timeout of sw reset This patch uses an mdelay to manage the timeout on sw reset to be independant of cpu_clk. Signed-off-by: Francesco Virlinzi Reviewed-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 3 ++- drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index da66ac511c4c..4d5402a1d262 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -39,10 +39,11 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, /* DMA SW reset */ value |= DMA_BUS_MODE_SFT_RESET; writel(value, ioaddr + DMA_BUS_MODE); - limit = 15000; + limit = 10; while (limit--) { if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) break; + mdelay(10); } if (limit < 0) return -EBUSY; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c index 627f656b0f3c..bc17fd08b55d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c @@ -41,10 +41,11 @@ static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, /* DMA SW reset */ value |= DMA_BUS_MODE_SFT_RESET; writel(value, ioaddr + DMA_BUS_MODE); - limit = 15000; + limit = 10; while (limit--) { if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) break; + mdelay(10); } if (limit < 0) return -EBUSY; From c5b9b4e4b9076089fe7f9d4f5d1f2bba776646d2 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 16 Nov 2011 21:57:59 +0000 Subject: [PATCH 602/692] stmmac: fix advertising 1000Base capabilties for non GMII iface This patch fixes the way to stop the 1000Base advertising capabilties for non GMII interfaces. Signed-off-by: Srinivas Kandagatla Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 20546bbbb8db..e079762a796e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -321,12 +321,10 @@ static int stmmac_init_phy(struct net_device *dev) } /* Stop Advertising 1000BASE Capability if interface is not GMII */ - if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) || - (interface == PHY_INTERFACE_MODE_RMII))) { - phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - phydev->advertising = phydev->supported; - } + if ((interface == PHY_INTERFACE_MODE_MII) || + (interface == PHY_INTERFACE_MODE_RMII)) + phydev->advertising &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); /* * Broken HW is sometimes missing the pull-up resistor on the From 19e30c14371f7afd38d1d35a693b96423a4db144 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 16 Nov 2011 21:58:00 +0000 Subject: [PATCH 603/692] stmmac: parameters auto-tuning through HW cap reg New GMAC devices (newer than the databook 3.50a) have the HW capability register that provides which features are actually supported by the hardware. On old devices many information have to be passed through the platform, for example: enhanced descriptor structure, TX COE etc. These are mandatory to properly configure the driver. This remains still valid because the driver has to support old Synopsys devices but now it's also able to override them using the values from the HW capability register if supported. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +- .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 ++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 93 +++++++++++++------ 3 files changed, 72 insertions(+), 29 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 9bafa6cf9e8b..a140a8fbf051 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -72,7 +72,6 @@ struct stmmac_priv { spinlock_t lock; spinlock_t tx_lock; int wolopts; - int wolenabled; int wol_irq; #ifdef CONFIG_STMMAC_TIMER struct stmmac_timer *tm; @@ -80,6 +79,7 @@ struct stmmac_priv { struct plat_stmmacenet_data *plat; struct stmmac_counters mmc; struct dma_features dma_cap; + int hw_cap_support; }; extern int stmmac_mdio_unregister(struct net_device *ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index e8eff09bbbd7..0395f9eba801 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -430,6 +430,12 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct stmmac_priv *priv = netdev_priv(dev); u32 support = WAKE_MAGIC | WAKE_UCAST; + /* By default almost all GMAC devices support the WoL via + * magic frame but we can disable it if the HW capability + * register shows no support for pmt_magic_frame. */ + if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame)) + wol->wolopts &= ~WAKE_MAGIC; + if (!device_can_wakeup(priv->device)) return -EINVAL; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e079762a796e..7f3ffd3742d8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -805,8 +805,29 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) return 0; } -/* New GMAC chips support a new register to indicate the - * presence of the optional feature/functions. +/** + * stmmac_selec_desc_mode + * @dev : device pointer + * Description: select the Enhanced/Alternate or Normal descriptors */ +static void stmmac_selec_desc_mode(struct stmmac_priv *priv) +{ + if (priv->plat->enh_desc) { + pr_info(" Enhanced/Alternate descriptors\n"); + priv->hw->desc = &enh_desc_ops; + } else { + pr_info(" Normal descriptors\n"); + priv->hw->desc = &ndesc_ops; + } +} + +/** + * stmmac_get_hw_features + * @priv : private device pointer + * Description: + * new GMAC chip generations have a new register to indicate the + * presence of the optional feature/functions. + * This can be also used to override the value passed through the + * platform and necessary for old MAC10/100 and GMAC chips. */ static int stmmac_get_hw_features(struct stmmac_priv *priv) { @@ -827,7 +848,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; priv->dma_cap.pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; - /*MMC*/ + /* MMC */ priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11; /* IEEE 1588-2002*/ priv->dma_cap.time_stamp = @@ -855,8 +876,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) priv->dma_cap.enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; - } else - pr_debug("\tNo HW DMA feature register supported"); + } return hw_cap; } @@ -911,6 +931,44 @@ static int stmmac_open(struct net_device *dev) goto open_error; } + stmmac_get_synopsys_id(priv); + + priv->hw_cap_support = stmmac_get_hw_features(priv); + + if (priv->hw_cap_support) { + pr_info(" Support DMA HW capability register"); + + /* We can override some gmac/dma configuration fields: e.g. + * enh_desc, tx_coe (e.g. that are passed through the + * platform) with the values from the HW capability + * register (if supported). + */ + priv->plat->enh_desc = priv->dma_cap.enh_desc; + priv->plat->tx_coe = priv->dma_cap.tx_coe; + priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up; + + /* By default disable wol on magic frame if not supported */ + if (!priv->dma_cap.pmt_magic_frame) + priv->wolopts &= ~WAKE_MAGIC; + + } else + pr_info(" No HW DMA feature register supported"); + + /* Select the enhnaced/normal descriptor structures */ + stmmac_selec_desc_mode(priv); + + /* PMT module is not integrated in all the MAC devices. */ + if (priv->plat->pmt) { + pr_info(" Remote wake-up capable\n"); + device_set_wakeup_capable(priv->device, 1); + } + + priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); + if (priv->rx_coe) + pr_info(" Checksum Offload Engine supported\n"); + if (priv->plat->tx_coe) + pr_info(" Checksum insertion supported\n"); + /* Create and initialize the TX/RX descriptors chains. */ priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); @@ -933,15 +991,6 @@ static int stmmac_open(struct net_device *dev) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); - stmmac_get_synopsys_id(priv); - - stmmac_get_hw_features(priv); - - priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); - if (priv->rx_coe) - pr_info("stmmac: Rx Checksum Offload Engine supported\n"); - if (priv->plat->tx_coe) - pr_info("\tTX Checksum insertion supported\n"); netdev_update_features(dev); /* Request the IRQ lines */ @@ -1556,7 +1605,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v) struct net_device *dev = seq->private; struct stmmac_priv *priv = netdev_priv(dev); - if (!stmmac_get_hw_features(priv)) { + if (!priv->hw_cap_support) { seq_printf(seq, "DMA HW features not supported\n"); return 0; } @@ -1764,12 +1813,6 @@ static int stmmac_mac_device_setup(struct net_device *dev) if (!device) return -ENOMEM; - if (priv->plat->enh_desc) { - device->desc = &enh_desc_ops; - pr_info("\tEnhanced descriptor structure\n"); - } else - device->desc = &ndesc_ops; - priv->hw = device; priv->hw->ring = &ring_mode_ops; @@ -1843,11 +1886,6 @@ static int stmmac_dvr_probe(struct platform_device *pdev) priv->ioaddr = addr; - /* PMT module is not integrated in all the MAC devices. */ - if (plat_dat->pmt) { - pr_info("\tPMT module supported\n"); - device_set_wakeup_capable(&pdev->dev, 1); - } /* * On some platforms e.g. SPEAr the wake up irq differs from the mac irq * The external wake up irq can be passed through the platform code @@ -1860,7 +1898,6 @@ static int stmmac_dvr_probe(struct platform_device *pdev) if (priv->wol_irq == -ENXIO) priv->wol_irq = ndev->irq; - platform_set_drvdata(pdev, ndev); /* Set the I/O base addr */ @@ -1873,7 +1910,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev) goto out_free_ndev; } - /* MAC HW revice detection */ + /* MAC HW device detection */ ret = stmmac_mac_device_setup(ndev); if (ret < 0) goto out_plat_exit; From 989508ba60da6dce79f8aaee1be6c092fd4c67f8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 16 Nov 2011 21:58:01 +0000 Subject: [PATCH 604/692] stmmac: remove spin_lock in stmmac_ioctl. This patch removes un-needed spin_lock in stmmac_ioctl while reading and writing mdio registers. While holding spin_lock the code must be atomic, which is not true in this case as both mdiobus_read and writes have mutex locks. Without this patch reading mdio registers via mii-tool results in below BUG: mii-tool -vvv eth0" Using SIOCGMIIPHY=0x8947 BUG: sleeping function called from invalid context at kernel/mutex.c:287 in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool 2 locks held by mii-tool/614: #0: (rtnl_mutex){......}, at: [] dev_ioctl+0x550/0x674 #1: (&priv->lock){......}, at: [] stmmac_ioctl+0x4c/0x78 [] (unwind_backtrace+0x0/0xcc) from [] (mutex_lock_nested+0x24/0x35c) [] (mutex_lock_nested+0x24/0x35c) from [] (mdiobus_read+0x44/0x70) [] (mdiobus_read+0x44/0x70) from [] (phy_mii_ioctl+0x4c/0x138) [] (phy_mii_ioctl+0x4c/0x138) from [] (stmmac_ioctl+0x5c/0x78) [] (stmmac_ioctl+0x5c/0x78) from [] (dev_ifsioc+0x2a4/0x2c8) [] (dev_ifsioc+0x2a4/0x2c8) from [] (dev_ioctl+0x560/0x674) [] (dev_ioctl+0x560/0x674) from [] (vfs_ioctl+0x2c/0x8c) [] (vfs_ioctl+0x2c/0x8c) from [] (do_vfs_ioctl+0x530/0x578) [] (do_vfs_ioctl+0x530/0x578) from [] (sys_ioctl+0x34/0x54) [] (sys_ioctl+0x34/0x54) from [] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Srinivas Kandagatla Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 7f3ffd3742d8..29dd87c675dc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1536,9 +1536,7 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (!priv->phydev) return -EINVAL; - spin_lock(&priv->lock); ret = phy_mii_ioctl(priv->phydev, rq, cmd); - spin_unlock(&priv->lock); return ret; } From 102463b18d922dd55c29fbfa222e0355ecf3e42f Mon Sep 17 00:00:00 2001 From: Francesco Virlinzi Date: Wed, 16 Nov 2011 21:58:02 +0000 Subject: [PATCH 605/692] stmmac: fix pm functions avoiding sleep on spinlock This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 29dd87c675dc..8ea770a89f25 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2011,12 +2011,13 @@ static int stmmac_suspend(struct device *dev) if (!ndev || !netif_running(ndev)) return 0; + if (priv->phydev) + phy_stop(priv->phydev); + spin_lock(&priv->lock); netif_device_detach(ndev); netif_stop_queue(ndev); - if (priv->phydev) - phy_stop(priv->phydev); #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); @@ -2074,12 +2075,13 @@ static int stmmac_resume(struct device *dev) #endif napi_enable(&priv->napi); - if (priv->phydev) - phy_start(priv->phydev); - netif_start_queue(ndev); spin_unlock(&priv->lock); + + if (priv->phydev) + phy_start(priv->phydev); + return 0; } From 3627902377c4fbdeef4c689fb43b47a86a3ec859 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 17 Nov 2011 05:33:05 -0500 Subject: [PATCH 606/692] hwmon: (exynos4_tmu) Fix Kconfig dependency Rename dependency of EXYNOS4_TMU in Kconfig to the existing one. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 9ec854ae118b..91be41f60809 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -315,7 +315,7 @@ config SENSORS_DS1621 config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" - depends on EXYNOS4_DEV_TMU + depends on ARCH_EXYNOS4 help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS4 series of SoC. From d29387e8de8bdf64374874112b2b1540d3ada674 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Nov 2011 18:17:03 -0800 Subject: [PATCH 607/692] media/staging: fix allyesconfig build error Fix x86 allyesconfig builds. Builds fail due to a non-static variable named 'debug' in drivers/staging/media/as102: arch/x86/built-in.o:arch/x86/kernel/entry_32.S:1296: first defined here ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o Thou shalt have no non-static identifiers that are named 'debug'. Signed-off-by: Randy Dunlap Cc: Pierrick Hascoet Signed-off-by: Linus Torvalds --- drivers/staging/media/as102/as102_drv.c | 4 ++-- drivers/staging/media/as102/as102_drv.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c index d335c7d6fa0f..828526d4c289 100644 --- a/drivers/staging/media/as102/as102_drv.c +++ b/drivers/staging/media/as102/as102_drv.c @@ -32,8 +32,8 @@ #include "as102_fw.h" #include "dvbdev.h" -int debug; -module_param_named(debug, debug, int, 0644); +int as102_debug; +module_param_named(debug, as102_debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)"); int dual_tuner; diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h index bcda635b5a99..fd33f5a12dcc 100644 --- a/drivers/staging/media/as102/as102_drv.h +++ b/drivers/staging/media/as102/as102_drv.h @@ -37,7 +37,8 @@ extern struct spi_driver as102_spi_driver; #define DRIVER_FULL_NAME "Abilis Systems as10x usb driver" #define DRIVER_NAME "as10x_usb" -extern int debug; +extern int as102_debug; +#define debug as102_debug #define dprintk(debug, args...) \ do { if (debug) { \ From 869f8dfa52295e75e043af618e47305e4b109bc1 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Nov 2011 18:20:51 -0800 Subject: [PATCH 608/692] platform/x86: fix dell-laptop function prototypes Fix build warnings: drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype Signed-off-by: Randy Dunlap Cc: Matthew Garrett Signed-off-by: Linus Torvalds --- drivers/platform/x86/dell-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index a43cfd906c6d..d93e962f2610 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -589,14 +589,14 @@ static const struct backlight_ops dell_ops = { .update_status = dell_send_intensity, }; -static void touchpad_led_on() +static void touchpad_led_on(void) { int command = 0x97; char data = 1; i8042_command(&data, command | 1 << 12); } -static void touchpad_led_off() +static void touchpad_led_off(void) { int command = 0x97; char data = 2; From 1df647197c5b8aacaeb58592cba9a1df322c9000 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sun, 13 Nov 2011 19:47:32 -0600 Subject: [PATCH 609/692] writeback: hard throttle 1000+ dd on a slow USB stick The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 79c34419fadd..e7cb5ff6e53d 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1136,14 +1136,11 @@ static void balance_dirty_pages(struct address_space *mapping, __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); - dirty_thresh = hard_dirty_limit(dirty_thresh); /* - * max-pause area. If dirty exceeded but still within this - * area, no need to sleep for more than 200ms: (a) 8 pages per - * 200ms is typically more than enough to curb heavy dirtiers; - * (b) the pause time limit makes the dirtiers more responsive. + * This is typically equal to (nr_dirty < dirty_thresh) and can + * also keep "1000+ dd on a slow USB stick" under control. */ - if (nr_dirty < dirty_thresh) + if (task_ratelimit) break; if (fatal_signal_pending(current)) From 468e6a20afaccb67e2a7d7f60d301f90e1c6f301 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 7 Sep 2011 10:41:32 -0600 Subject: [PATCH 610/692] writeback: remove vm_dirties and task->dirties They are not used any more. Signed-off-by: Wu Fengguang --- include/linux/init_task.h | 1 - include/linux/sched.h | 1 - kernel/fork.c | 5 ----- mm/page-writeback.c | 9 --------- 4 files changed, 16 deletions(-) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab01e76c..94b1e356c02a 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -184,7 +184,6 @@ extern struct cred init_cred; [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ }, \ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \ - .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ INIT_IDS \ INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 68daf4f27e2c..1c4f3e9b9bc5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1521,7 +1521,6 @@ struct task_struct { #ifdef CONFIG_FAULT_INJECTION int make_it_fail; #endif - struct prop_local_single dirties; /* * when (nr_dirtied >= nr_dirtied_pause), it's time to call * balance_dirty_pages() for some dirty throttling pause diff --git a/kernel/fork.c b/kernel/fork.c index ba0d17261329..da4a6a10d088 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -162,7 +162,6 @@ static void account_kernel_stack(struct thread_info *ti, int account) void free_task(struct task_struct *tsk) { - prop_local_destroy_single(&tsk->dirties); account_kernel_stack(tsk->stack, -1); free_thread_info(tsk->stack); rt_mutex_debug_task_free(tsk); @@ -274,10 +273,6 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) tsk->stack = ti; - err = prop_local_init_single(&tsk->dirties); - if (err) - goto out; - setup_thread_stack(tsk, orig); clear_user_return_notifier(tsk); clear_tsk_need_resched(tsk); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index e7cb5ff6e53d..71252486bc6f 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -128,7 +128,6 @@ unsigned long global_dirty_limit; * */ static struct prop_descriptor vm_completions; -static struct prop_descriptor vm_dirties; /* * couple the period to the dirty_ratio: @@ -154,7 +153,6 @@ static void update_completion_period(void) { int shift = calc_period_shift(); prop_change_shift(&vm_completions, shift); - prop_change_shift(&vm_dirties, shift); writeback_set_ratelimit(); } @@ -235,11 +233,6 @@ void bdi_writeout_inc(struct backing_dev_info *bdi) } EXPORT_SYMBOL_GPL(bdi_writeout_inc); -void task_dirty_inc(struct task_struct *tsk) -{ - prop_inc_single(&vm_dirties, &tsk->dirties); -} - /* * Obtain an accurate fraction of the BDI's portion. */ @@ -1395,7 +1388,6 @@ void __init page_writeback_init(void) shift = calc_period_shift(); prop_descriptor_init(&vm_completions, shift); - prop_descriptor_init(&vm_dirties, shift); } /** @@ -1724,7 +1716,6 @@ void account_page_dirtied(struct page *page, struct address_space *mapping) __inc_zone_page_state(page, NR_DIRTIED); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); __inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED); - task_dirty_inc(current); task_io_account_write(PAGE_CACHE_SIZE); } } From bd29e568a4cb6465f6e5ec7c1c1f3ae7d99cbec1 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Wed, 16 Nov 2011 10:50:56 -0800 Subject: [PATCH 611/692] fix typo/thinko in get_random_bytes() If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by: Tony Luck Acked-by: H. Peter Anvin Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 63e19ba56bbe..6035ab8d5ef7 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -941,7 +941,7 @@ void get_random_bytes(void *buf, int nbytes) if (!arch_get_random_long(&v)) break; - memcpy(buf, &v, chunk); + memcpy(p, &v, chunk); p += chunk; nbytes -= chunk; } From 9e6dabeffd1d0ec2aa19aa076c4886067238d442 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Nov 2011 11:00:41 +0100 Subject: [PATCH 612/692] KVM: s390: Fix RUNNING flag misinterpretation CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Cc: stable@kernel.org Signed-off-by: Cornelia Huck Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity --- arch/s390/include/asm/kvm_host.h | 2 +- arch/s390/kvm/diag.c | 2 +- arch/s390/kvm/intercept.c | 3 ++- arch/s390/kvm/interrupt.c | 1 + arch/s390/kvm/kvm-s390.c | 10 +++++++--- arch/s390/kvm/sigp.c | 6 +++--- 6 files changed, 15 insertions(+), 9 deletions(-) diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 24e18473d926..20f9068cd6b5 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -47,7 +47,7 @@ struct sca_block { #define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1)) #define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE) -#define CPUSTAT_HOST 0x80000000 +#define CPUSTAT_STOPPED 0x80000000 #define CPUSTAT_WAIT 0x10000000 #define CPUSTAT_ECALL_PEND 0x08000000 #define CPUSTAT_STOP_INT 0x04000000 diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index 87cedd61be04..8943e82cd4d9 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -70,7 +70,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; } - atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); + atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM; vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL; vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT; diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index c7c51898984e..02434543eabb 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -132,7 +132,6 @@ static int handle_stop(struct kvm_vcpu *vcpu) int rc = 0; vcpu->stat.exit_stop_request++; - atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); spin_lock_bh(&vcpu->arch.local_int.lock); if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) { vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP; @@ -149,6 +148,8 @@ static int handle_stop(struct kvm_vcpu *vcpu) } if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) { + atomic_set_mask(CPUSTAT_STOPPED, + &vcpu->arch.sie_block->cpuflags); vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP; VCPU_EVENT(vcpu, 3, "%s", "cpu stopped"); rc = -EOPNOTSUPP; diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 87c16705b381..278ee009ce65 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -252,6 +252,7 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, offsetof(struct _lowcore, restart_psw), sizeof(psw_t)); if (rc == -EFAULT) exception = 1; + atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); break; case KVM_S390_PROGRAM_INT: diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0bd3bea1e4cd..630ab65b488b 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -270,10 +270,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) restore_fp_regs(&vcpu->arch.guest_fpregs); restore_access_regs(vcpu->arch.guest_acrs); gmap_enable(vcpu->arch.gmap); + atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); } void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); gmap_disable(vcpu->arch.gmap); save_fp_regs(&vcpu->arch.guest_fpregs); save_access_regs(vcpu->arch.guest_acrs); @@ -301,7 +303,9 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) { - atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM); + atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | + CPUSTAT_SM | + CPUSTAT_STOPPED); vcpu->arch.sie_block->ecb = 6; vcpu->arch.sie_block->eca = 0xC1002001U; vcpu->arch.sie_block->fac = (int) (long) facilities; @@ -428,7 +432,7 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw) { int rc = 0; - if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING) + if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED)) rc = -EBUSY; else { vcpu->run->psw_mask = psw.mask; @@ -501,7 +505,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); + atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL); diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index f815118835f3..4a488a98d7f8 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -57,8 +57,8 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, spin_lock(&fi->lock); if (fi->local_int[cpu_addr] == NULL) rc = 3; /* not operational */ - else if (atomic_read(fi->local_int[cpu_addr]->cpuflags) - & CPUSTAT_RUNNING) { + else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags) + & CPUSTAT_STOPPED)) { *reg &= 0xffffffff00000000UL; rc = 1; /* status stored */ } else { @@ -251,7 +251,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, spin_lock_bh(&li->lock); /* cpu must be in stopped state */ - if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) { + if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) { rc = 1; /* incorrect state */ *reg &= SIGP_STAT_INCORRECT_STATE; kfree(inti); From bd59d3a4444e5f941c863db1a7715edf7289e29a Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Nov 2011 11:00:42 +0100 Subject: [PATCH 613/692] KVM: s390: handle SIGP sense running intercepts SIGP sense running may cause an intercept on higher level virtualization, so handle it by checking the CPUSTAT_RUNNING flag. Signed-off-by: Cornelia Huck Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity --- arch/s390/include/asm/kvm_host.h | 1 + arch/s390/kvm/kvm-s390.c | 1 + arch/s390/kvm/sigp.c | 39 ++++++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+) diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 20f9068cd6b5..b0c235cb6ad5 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -139,6 +139,7 @@ struct kvm_vcpu_stat { u32 instruction_stfl; u32 instruction_tprot; u32 instruction_sigp_sense; + u32 instruction_sigp_sense_running; u32 instruction_sigp_external_call; u32 instruction_sigp_emergency; u32 instruction_sigp_stop; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 630ab65b488b..0891926ea953 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -65,6 +65,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "instruction_stfl", VCPU_STAT(instruction_stfl) }, { "instruction_tprot", VCPU_STAT(instruction_tprot) }, { "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) }, + { "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) }, { "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) }, { "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) }, { "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) }, diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 4a488a98d7f8..0a7941d74bc6 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -31,9 +31,11 @@ #define SIGP_SET_PREFIX 0x0d #define SIGP_STORE_STATUS_ADDR 0x0e #define SIGP_SET_ARCH 0x12 +#define SIGP_SENSE_RUNNING 0x15 /* cpu status bits */ #define SIGP_STAT_EQUIPMENT_CHECK 0x80000000UL +#define SIGP_STAT_NOT_RUNNING 0x00000400UL #define SIGP_STAT_INCORRECT_STATE 0x00000200UL #define SIGP_STAT_INVALID_PARAMETER 0x00000100UL #define SIGP_STAT_EXT_CALL_PENDING 0x00000080UL @@ -275,6 +277,38 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, return rc; } +static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr, + unsigned long *reg) +{ + int rc; + struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; + + if (cpu_addr >= KVM_MAX_VCPUS) + return 3; /* not operational */ + + spin_lock(&fi->lock); + if (fi->local_int[cpu_addr] == NULL) + rc = 3; /* not operational */ + else { + if (atomic_read(fi->local_int[cpu_addr]->cpuflags) + & CPUSTAT_RUNNING) { + /* running */ + rc = 1; + } else { + /* not running */ + *reg &= 0xffffffff00000000UL; + *reg |= SIGP_STAT_NOT_RUNNING; + rc = 0; + } + } + spin_unlock(&fi->lock); + + VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr, + rc); + + return rc; +} + int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) { int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; @@ -331,6 +365,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) rc = __sigp_set_prefix(vcpu, cpu_addr, parameter, &vcpu->arch.guest_gprs[r1]); break; + case SIGP_SENSE_RUNNING: + vcpu->stat.instruction_sigp_sense_running++; + rc = __sigp_sense_running(vcpu, cpu_addr, + &vcpu->arch.guest_gprs[r1]); + break; case SIGP_RESTART: vcpu->stat.instruction_sigp_restart++; /* user space must know about restart */ From 1eddb85f889a5a9fe59ec184e06844716a00aded Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 17 Nov 2011 11:00:43 +0100 Subject: [PATCH 614/692] KVM: s390: Fix tprot locking There is a potential host deadlock in the tprot intercept handling. We must not hold the mmap semaphore while resolving the guest address. If userspace is remapping, then the memory detection in the guest is broken anyway so we can safely separate the address translation from walking the vmas. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity --- arch/s390/kvm/priv.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 391626361084..d02638959922 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -336,6 +336,7 @@ static int handle_tprot(struct kvm_vcpu *vcpu) u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0; u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0; struct vm_area_struct *vma; + unsigned long user_address; vcpu->stat.instruction_tprot++; @@ -349,9 +350,14 @@ static int handle_tprot(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; + /* we must resolve the address without holding the mmap semaphore. + * This is ok since the userspace hypervisor is not supposed to change + * the mapping while the guest queries the memory. Otherwise the guest + * might crash or get wrong info anyway. */ + user_address = (unsigned long) __guestaddr_to_user(vcpu, address1); + down_read(¤t->mm->mmap_sem); - vma = find_vma(current->mm, - (unsigned long) __guestaddr_to_user(vcpu, address1)); + vma = find_vma(current->mm, user_address); if (!vma) { up_read(¤t->mm->mmap_sem); return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); From 52e16b185fdd0aeb0522c203e944873e38ac1575 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 17 Nov 2011 11:00:44 +0100 Subject: [PATCH 615/692] KVM: s390: announce SYNC_MMU KVM on s390 always had a sync mmu. Any mapping change in userspace mapping was always reflected immediately in the guest mapping. - In older code the guest mapping was just an offset - In newer code the last level page table is shared Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity --- arch/s390/kvm/kvm-s390.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0891926ea953..d1c445732451 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -128,6 +128,7 @@ int kvm_dev_ioctl_check_extension(long ext) switch (ext) { case KVM_CAP_S390_PSW: case KVM_CAP_S390_GMAP: + case KVM_CAP_SYNC_MMU: r = 1; break; default: From 8bf00a529967dafbbb210b377c38a15834d1e979 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:22 +0200 Subject: [PATCH 616/692] KVM: VMX: add support for switching of PERF_GLOBAL_CTRL Some cpus have special support for switching PERF_GLOBAL_CTRL msr. Add logic to detect if such support exists and works properly and extend msr switching code to use it if available. Also extend number of generic msr switching entries to 8. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 104 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 93 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index a0d6bd9ad442..55e849b52d9e 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -118,7 +118,7 @@ module_param(ple_gap, int, S_IRUGO); static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW; module_param(ple_window, int, S_IRUGO); -#define NR_AUTOLOAD_MSRS 1 +#define NR_AUTOLOAD_MSRS 8 #define VMCS02_POOL_SIZE 1 struct vmcs { @@ -622,6 +622,7 @@ static unsigned long *vmx_msr_bitmap_legacy; static unsigned long *vmx_msr_bitmap_longmode; static bool cpu_has_load_ia32_efer; +static bool cpu_has_load_perf_global_ctrl; static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS); static DEFINE_SPINLOCK(vmx_vpid_lock); @@ -1191,15 +1192,34 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu) vmcs_write32(EXCEPTION_BITMAP, eb); } +static void clear_atomic_switch_msr_special(unsigned long entry, + unsigned long exit) +{ + vmcs_clear_bits(VM_ENTRY_CONTROLS, entry); + vmcs_clear_bits(VM_EXIT_CONTROLS, exit); +} + static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr) { unsigned i; struct msr_autoload *m = &vmx->msr_autoload; - if (msr == MSR_EFER && cpu_has_load_ia32_efer) { - vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER); - vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER); - return; + switch (msr) { + case MSR_EFER: + if (cpu_has_load_ia32_efer) { + clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER, + VM_EXIT_LOAD_IA32_EFER); + return; + } + break; + case MSR_CORE_PERF_GLOBAL_CTRL: + if (cpu_has_load_perf_global_ctrl) { + clear_atomic_switch_msr_special( + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL); + return; + } + break; } for (i = 0; i < m->nr; ++i) @@ -1215,18 +1235,44 @@ static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr) vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr); } +static void add_atomic_switch_msr_special(unsigned long entry, + unsigned long exit, unsigned long guest_val_vmcs, + unsigned long host_val_vmcs, u64 guest_val, u64 host_val) +{ + vmcs_write64(guest_val_vmcs, guest_val); + vmcs_write64(host_val_vmcs, host_val); + vmcs_set_bits(VM_ENTRY_CONTROLS, entry); + vmcs_set_bits(VM_EXIT_CONTROLS, exit); +} + static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr, u64 guest_val, u64 host_val) { unsigned i; struct msr_autoload *m = &vmx->msr_autoload; - if (msr == MSR_EFER && cpu_has_load_ia32_efer) { - vmcs_write64(GUEST_IA32_EFER, guest_val); - vmcs_write64(HOST_IA32_EFER, host_val); - vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER); - vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER); - return; + switch (msr) { + case MSR_EFER: + if (cpu_has_load_ia32_efer) { + add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER, + VM_EXIT_LOAD_IA32_EFER, + GUEST_IA32_EFER, + HOST_IA32_EFER, + guest_val, host_val); + return; + } + break; + case MSR_CORE_PERF_GLOBAL_CTRL: + if (cpu_has_load_perf_global_ctrl) { + add_atomic_switch_msr_special( + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL, + GUEST_IA32_PERF_GLOBAL_CTRL, + HOST_IA32_PERF_GLOBAL_CTRL, + guest_val, host_val); + return; + } + break; } for (i = 0; i < m->nr; ++i) @@ -2455,6 +2501,42 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS, VM_EXIT_LOAD_IA32_EFER); + cpu_has_load_perf_global_ctrl = + allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS, + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL) + && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL); + + /* + * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL + * but due to arrata below it can't be used. Workaround is to use + * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL. + * + * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32] + * + * AAK155 (model 26) + * AAP115 (model 30) + * AAT100 (model 37) + * BC86,AAY89,BD102 (model 44) + * BA97 (model 46) + * + */ + if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) { + switch (boot_cpu_data.x86_model) { + case 26: + case 30: + case 37: + case 44: + case 46: + cpu_has_load_perf_global_ctrl = false; + printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL " + "does not work properly. Using workaround\n"); + break; + default: + break; + } + } + return 0; } From d7cd97964ba6d70c558348bd2c87290dce885583 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:23 +0200 Subject: [PATCH 617/692] KVM: VMX: Add support for guest/host-only profiling Support guest/host-only profiling by switch perf msrs on a guest entry if needed. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 55e849b52d9e..98f4b0bcc660 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "trace.h" @@ -6050,6 +6051,24 @@ static void vmx_cancel_injection(struct kvm_vcpu *vcpu) vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); } +static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx) +{ + int i, nr_msrs; + struct perf_guest_switch_msr *msrs; + + msrs = perf_guest_get_msrs(&nr_msrs); + + if (!msrs) + return; + + for (i = 0; i < nr_msrs; i++) + if (msrs[i].host == msrs[i].guest) + clear_atomic_switch_msr(vmx, msrs[i].msr); + else + add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest, + msrs[i].host); +} + #ifdef CONFIG_X86_64 #define R "r" #define Q "q" @@ -6099,6 +6118,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) vmx_set_interrupt_shadow(vcpu, 0); + atomic_switch_perf_msrs(vmx); + vmx->__launched = vmx->loaded_vmcs->launched; asm( /* Store host registers */ From e7fc6f93b4242b2b566f0070709e27257d6da8a2 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:24 +0200 Subject: [PATCH 618/692] KVM: VMX: Check for automatic switch msr table overflow Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 98f4b0bcc660..579a0b51696a 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1280,7 +1280,11 @@ static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr, if (m->guest[i].index == msr) break; - if (i == m->nr) { + if (i == NR_AUTOLOAD_MSRS) { + printk_once(KERN_WARNING"Not enough mst switch entries. " + "Can't add msr %x\n", msr); + return; + } else if (i == m->nr) { ++m->nr; vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr); vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr); From bb75c627fb0dfb8c0ab75d3033709ff928896e16 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Thu, 17 Nov 2011 15:26:35 +0100 Subject: [PATCH 619/692] Revert "KVM: PPC: Add support for explicit HIOR setting" This reverts commit a15bd354f083f20f257db450488db52ac27df439. It exceeded the padding on the SREGS struct, rendering the ABI backwards-incompatible. Conflicts: arch/powerpc/kvm/powerpc.c include/linux/kvm.h Signed-off-by: Avi Kivity --- arch/powerpc/include/asm/kvm.h | 8 -------- arch/powerpc/include/asm/kvm_book3s.h | 2 -- arch/powerpc/kvm/book3s_pr.c | 14 ++------------ arch/powerpc/kvm/powerpc.c | 1 - include/linux/kvm.h | 1 - 5 files changed, 2 insertions(+), 24 deletions(-) diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index 08fe69edcd10..0ad432bc81d6 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -148,12 +148,6 @@ struct kvm_regs { #define KVM_SREGS_E_UPDATE_DEC (1 << 2) #define KVM_SREGS_E_UPDATE_DBSR (1 << 3) -/* - * Book3S special bits to indicate contents in the struct by maintaining - * backwards compatibility with older structs. If adding a new field, - * please make sure to add a flag for that new field */ -#define KVM_SREGS_S_HIOR (1 << 0) - /* * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a * previous KVM_GET_REGS. @@ -179,8 +173,6 @@ struct kvm_sregs { __u64 ibat[8]; __u64 dbat[8]; } ppc32; - __u64 flags; /* KVM_SREGS_S_ */ - __u64 hior; } s; struct { union { diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index a384ffdf33de..d4df013ad779 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -90,8 +90,6 @@ struct kvmppc_vcpu_book3s { #endif int context_id[SID_CONTEXTS]; - bool hior_sregs; /* HIOR is set by SREGS, not PVR */ - struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE]; struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG]; struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE]; diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index bc4d50dec78b..3c791e1eb675 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -151,16 +151,14 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr) #ifdef CONFIG_PPC_BOOK3S_64 if ((pvr >= 0x330000) && (pvr < 0x70330000)) { kvmppc_mmu_book3s_64_init(vcpu); - if (!to_book3s(vcpu)->hior_sregs) - to_book3s(vcpu)->hior = 0xfff00000; + to_book3s(vcpu)->hior = 0xfff00000; to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_64; } else #endif { kvmppc_mmu_book3s_32_init(vcpu); - if (!to_book3s(vcpu)->hior_sregs) - to_book3s(vcpu)->hior = 0; + to_book3s(vcpu)->hior = 0; to_book3s(vcpu)->msr_mask = 0xffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_32; } @@ -797,9 +795,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, } } - if (sregs->u.s.flags & KVM_SREGS_S_HIOR) - sregs->u.s.hior = to_book3s(vcpu)->hior; - return 0; } @@ -836,11 +831,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, /* Flush the MMU after messing with the segments */ kvmppc_mmu_pte_flush(vcpu, 0, 0); - if (sregs->u.s.flags & KVM_SREGS_S_HIOR) { - to_book3s(vcpu)->hior_sregs = true; - to_book3s(vcpu)->hior = sregs->u.s.hior; - } - return 0; } diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index efbf9ad87203..607fbdf24b84 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -208,7 +208,6 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PPC_BOOKE_SREGS: #else case KVM_CAP_PPC_SEGSTATE: - case KVM_CAP_PPC_HIOR: case KVM_CAP_PPC_PAPR: #endif case KVM_CAP_PPC_UNSET_IRQ: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index f47fcd30273d..c3892fc1d538 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -555,7 +555,6 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ -#define KVM_CAP_PPC_HIOR 67 #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_S390_GMAP 71 From e5489847d6fc0ff176048b6e1cf5034507bf703a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 17 Nov 2011 16:58:00 +0000 Subject: [PATCH 620/692] ARM: wire up process_vm_writev and process_vm_readv syscalls These two syscalls were introduced during the last merge window. Add the entries into the ARM call tables for them. Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 2 ++ arch/arm/kernel/calls.S | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c60a2944f95b..4a1123783806 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -402,6 +402,8 @@ #define __NR_syncfs (__NR_SYSCALL_BASE+373) #define __NR_sendmmsg (__NR_SYSCALL_BASE+374) #define __NR_setns (__NR_SYSCALL_BASE+375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9943e9e74a1b..463ff4a0ec8a 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -385,6 +385,8 @@ CALL(sys_syncfs) CALL(sys_sendmmsg) /* 375 */ CALL(sys_setns) + CALL(sys_process_vm_readv) + CALL(sys_process_vm_writev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted From df92d0561de364de53c42abc5d43e04ab6f326a5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:07 +0100 Subject: [PATCH 621/692] TTY: ldisc, allow waiting for ldisc arbitrarily long To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely long for ldisc to be gone. So here we add a parameter to tty_ldisc_wait_idle to allow that. This is only a preparation for the real fix which is done in the following patches. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 512c49f98e85..534d176a78ed 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -547,15 +547,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) /** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for + * @timeout: for how long to wait at most * * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. */ -static int tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) { - int ret; + long ret; ret = wait_event_timeout(tty_ldisc_idle, - atomic_read(&tty->ldisc->users) == 1, 5 * HZ); + atomic_read(&tty->ldisc->users) == 1, timeout); if (ret < 0) return ret; return ret > 0 ? 0 : -EBUSY; @@ -665,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_flush_works(tty); - retval = tty_ldisc_wait_idle(tty); + retval = tty_ldisc_wait_idle(tty, 5 * HZ); tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -762,7 +763,7 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); From 300420722e0734a4254f3b634e0f82664495d210 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:08 +0100 Subject: [PATCH 622/692] TTY: ldisc, move wait idle to caller It is the only place where reinit is called from. And we really need to wait for the old ldisc to go once. Actually this is the place where the waiting originally was (before removed and re-added later). This will make the fix in the following patch easier to implement. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 534d176a78ed..a69a755035b6 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -763,8 +763,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); - tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; @@ -848,6 +846,8 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (reset == 0) { if (!tty_ldisc_reinit(tty, tty->termios->c_line)) From 0c73c08ec73dbe080b9ec56696ee21d32754d918 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:09 +0100 Subject: [PATCH 623/692] TTY: ldisc, wait for ldisc infinitely in hangup For /dev/console case, we do not kill all ldisc users. It's due to redirected_tty_write test in __tty_hangup. In that case there still might be a process waiting e.g. in n_tty_read for input. We wait for such processes to disappear. The problem is that we use a timeout. After this timeout, we continue closing the ldisc and start freeing tty resources. It obviously leads to crashes when the other process is woken. So to fix this, we wait infinitely before reiniting the ldisc. (The tiocsetd remains untouched -- times out after 5s.) This is nicely reproducible with this run from shell: exec 0<>/dev/console 1<>/dev/console 2<>/dev/console and stopping a getty like: systemctl stop serial-getty@ttyS0.service The crash proper may be produced only under load or with constified timing the same as for 92f6fa09b. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index a69a755035b6..8e0924f55446 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -36,6 +36,7 @@ #include #include +#include /* * This guards the refcounted line discipline lists. The lock @@ -837,7 +838,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) tty_unlock(); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - +retry: tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -846,7 +847,21 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (atomic_read(&tty->ldisc->users) != 1) { + char cur_n[TASK_COMM_LEN], tty_n[64]; + long timeout = 3 * HZ; + tty_unlock(); + + while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { + timeout = MAX_SCHEDULE_TIMEOUT; + printk_ratelimited(KERN_WARNING + "%s: waiting (%s) for %s took too long, but we keep waiting...\n", + __func__, get_task_comm(cur_n, current), + tty_name(tty, tty_n)); + } + mutex_unlock(&tty->ldisc_mutex); + goto retry; + } if (reset == 0) { From 8b258cc8ac229aa7d5dcb7cc34cb35d9124498ac Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 17 Nov 2011 21:39:33 +0100 Subject: [PATCH 624/692] PM Sleep: Do not extend wakeup paths to devices with ignore_children set Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman --- drivers/base/power/main.c | 3 ++- include/linux/device.h | 5 +++++ include/linux/pm.h | 2 +- include/linux/pm_runtime.h | 6 ------ 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 7fa098464dae..c3d2dfcf438d 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -920,7 +920,8 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) End: if (!error) { dev->power.is_suspended = true; - if (dev->power.wakeup_path && dev->parent) + if (dev->power.wakeup_path + && dev->parent && !dev->parent->power.ignore_children) dev->parent->power.wakeup_path = true; } diff --git a/include/linux/device.h b/include/linux/device.h index ffbcf95cd97d..52b3a4111df9 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -682,6 +682,11 @@ static inline bool device_async_suspend_enabled(struct device *dev) return !!dev->power.async_suspend; } +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) +{ + dev->power.ignore_children = enable; +} + static inline void device_lock(struct device *dev) { mutex_lock(&dev->mutex); diff --git a/include/linux/pm.h b/include/linux/pm.h index f15acb646813..5c4c8b18c8b7 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -447,6 +447,7 @@ struct dev_pm_info { unsigned int async_suspend:1; bool is_prepared:1; /* Owned by the PM core */ bool is_suspended:1; /* Ditto */ + bool ignore_children:1; spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; @@ -464,7 +465,6 @@ struct dev_pm_info { atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; - unsigned int ignore_children:1; unsigned int idle_notification:1; unsigned int request_pending:1; unsigned int deferred_resume:1; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index d8d903619642..d3085e72a0ee 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -52,11 +52,6 @@ static inline bool pm_children_suspended(struct device *dev) || !atomic_read(&dev->power.child_count); } -static inline void pm_suspend_ignore_children(struct device *dev, bool enable) -{ - dev->power.ignore_children = enable; -} - static inline void pm_runtime_get_noresume(struct device *dev) { atomic_inc(&dev->power.usage_count); @@ -130,7 +125,6 @@ static inline void pm_runtime_allow(struct device *dev) {} static inline void pm_runtime_forbid(struct device *dev) {} static inline bool pm_children_suspended(struct device *dev) { return false; } -static inline void pm_suspend_ignore_children(struct device *dev, bool en) {} static inline void pm_runtime_get_noresume(struct device *dev) {} static inline void pm_runtime_put_noidle(struct device *dev) {} static inline bool device_run_wake(struct device *dev) { return false; } From 88995e809f8a8115f30db24696c9137aad93d570 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 17 Nov 2011 21:39:55 +0100 Subject: [PATCH 625/692] PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unset Fix build regression introduced by commit 056879d2f244001b2888cdc8cf (ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix) by moving the intialization of the A3SP domain to a separate function and providing an empty definition of it for CONFIG_PM unset. Reported-and-tested-by: Guennadi Liakhovetski Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/pm-sh7372.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 1ec35ebe2376..f15f07e15856 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -232,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = { .no_debug = true, }; +static void sh7372_a3sp_init(void) +{ + /* serial consoles make use of SCIF hardware located in A3SP, + * keep such power domain on if "no_console_suspend" is set. + */ + sh7372_a3sp.stay_on = !console_suspend_enabled; +} + struct sh7372_pm_domain sh7372_a3sg = { .bit_shift = 13, }; -#endif /* CONFIG_PM */ +#else /* !CONFIG_PM */ + +static inline void sh7372_a3sp_init(void) {} + +#endif /* !CONFIG_PM */ #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) static int sh7372_do_idle_core_standby(unsigned long unused) @@ -474,10 +486,7 @@ void __init sh7372_pm_init(void) /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ __raw_writel(0, PDNSEL); - /* serial consoles make use of SCIF hardware located in A3SP, - * keep such power domain on if "no_console_suspend" is set. - */ - sh7372_a3sp.stay_on = !console_suspend_enabled; + sh7372_a3sp_init(); sh7372_suspend_init(); sh7372_cpuidle_init(); From 457eafce618cf89125da9d79751d81241bd3fa34 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 16 Nov 2011 00:49:28 +0600 Subject: [PATCH 626/692] drm, i915: Fix memory leak in i915_gem_busy_ioctl(). A call to i915_add_request() has been made in function i915_gem_busy_ioctl(). i915_add_request can fail, so in it's exit path previously allocated memory needs to be freed. Signed-off-by: Rakib Mullick Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ed0b68fdb970..8359dc777041 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3512,9 +3512,11 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * so emit a request to do so. */ request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request) + if (request) { ret = i915_add_request(obj->ring, NULL, request); - else + if (ret) + kfree(request); + } else ret = -ENOMEM; } From 04b38670cf46c096705f24e92a8747d1ab89e53c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:58:03 +0100 Subject: [PATCH 627/692] drm/i915: Fix inconsistent backlight level during disabled When the brightness property is inquired while the backlight is disabled, the driver returns a wrong value (zero) because it probes the value after the backlight was turned off. This caused a black screen even after the backlight is enabled again. It should return the internal backlight_level instead, so that it won't be influenced by the backlight-enable state. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=41926 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/872652 Tested-by: Kamal Mostafa Cc: Alex Davis Cc: Signed-off-by: Takashi Iwai Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_panel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 499d4c0dbeeb..21f60b7d69a3 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -326,7 +326,8 @@ static int intel_panel_update_status(struct backlight_device *bd) static int intel_panel_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); - return intel_panel_get_backlight(dev); + struct drm_i915_private *dev_priv = dev->dev_private; + return dev_priv->backlight_level; } static const struct backlight_ops intel_panel_bl_ops = { From 38ff1edb52f737d490126728e3d5ba2b8d2f3ba0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Thu, 17 Nov 2011 02:58:55 +0000 Subject: [PATCH 628/692] f_phonet: fix page offset of first received fragment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We pull one byte (the MAC header) from the first fragment before the fragment is actually appended. So the socket buffer length is 1, not 0. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- drivers/usb/gadget/f_phonet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 349077033338..16a509ae517b 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -346,7 +346,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req) } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - skb->len == 0, req->actual); + skb->len <= 1, req->actual); page = NULL; if (req->actual < req->length) { /* Last fragment */ From 4a8bb7e27fbb68da888b55f26defd2855225b2d5 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 15 Nov 2011 06:44:42 +0000 Subject: [PATCH 629/692] bonding: Don't allow mode change via sysfs with slaves present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When changing mode via bonding's sysfs, the slaves are not initialized correctly. Forbid to change modes with slaves present to ensure that every slave is initialized correctly via bond_enslave(). Signed-off-by: Veaceslav Falico Signed-off-by: Andy Gospodarek Acked-by: Nicolas de Pesloüan Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 5a20804fdece..4ef7e2fd9fe6 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -319,6 +319,13 @@ static ssize_t bonding_store_mode(struct device *d, goto out; } + if (bond->slave_cnt > 0) { + pr_err("unable to update mode of %s because it has slaves.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + new_value = bond_parse_parm(buf, bond_mode_tbl); if (new_value < 0) { pr_err("%s: Ignoring invalid mode value %.*s.\n", From 3e37fd3153ac95088a74f5e7c569f7567e9f993a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2011 18:17:59 -0800 Subject: [PATCH 630/692] sparc: Kill custom io_remap_pfn_range(). To handle the large physical addresses, just make a simple wrapper around remap_pfn_range() like MIPS does. Signed-off-by: David S. Miller --- arch/sparc/include/asm/pgtable_32.h | 20 +++- arch/sparc/include/asm/pgtable_64.h | 20 +++- arch/sparc/mm/Makefile | 1 - arch/sparc/mm/generic_32.c | 99 ----------------- arch/sparc/mm/generic_64.c | 165 ---------------------------- 5 files changed, 32 insertions(+), 273 deletions(-) delete mode 100644 arch/sparc/mm/generic_32.c delete mode 100644 arch/sparc/mm/generic_64.c diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h index 5b31a8e89823..a790cc657476 100644 --- a/arch/sparc/include/asm/pgtable_32.h +++ b/arch/sparc/include/asm/pgtable_32.h @@ -431,10 +431,6 @@ extern unsigned long *sparc_valid_addr_bitmap; #define kern_addr_valid(addr) \ (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap)) -extern int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long from, unsigned long pfn, - unsigned long size, pgprot_t prot); - /* * For sparc32&64, the pfn in io_remap_pfn_range() carries in * its high 4 bits. These macros/functions put it there or get it from there. @@ -443,6 +439,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, #define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) #define GET_PFN(pfn) (pfn & 0x0fffffffUL) +extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long, + unsigned long, pgprot_t); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot) +{ + unsigned long long offset, space, phys_base; + + offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT; + space = GET_IOSPACE(pfn); + phys_base = offset | (space << 32ULL); + + return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot); +} + #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ ({ \ diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index adf89329af59..38ebb2c60137 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -757,10 +757,6 @@ static inline bool kern_addr_valid(unsigned long addr) extern int page_in_phys_avail(unsigned long paddr); -extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, - unsigned long size, pgprot_t prot); - /* * For sparc32&64, the pfn in io_remap_pfn_range() carries in * its high 4 bits. These macros/functions put it there or get it from there. @@ -769,6 +765,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, #define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) #define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL) +extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long, + unsigned long, pgprot_t); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot) +{ + unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; + int space = GET_IOSPACE(pfn); + unsigned long phys_base; + + phys_base = offset | (((unsigned long) space) << 32UL); + + return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot); +} + #include /* We provide our own get_unmapped_area to cope with VA holes and diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile index e3cda21b5ee9..301421c11291 100644 --- a/arch/sparc/mm/Makefile +++ b/arch/sparc/mm/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_SPARC64) += ultra.o tlb.o tsb.o gup.o obj-y += fault_$(BITS).o obj-y += init_$(BITS).o obj-$(CONFIG_SPARC32) += loadmmu.o -obj-y += generic_$(BITS).o obj-$(CONFIG_SPARC32) += extable.o btfixup.o srmmu.o iommu.o io-unit.o obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o obj-$(CONFIG_SPARC_LEON)+= leon_mm.o diff --git a/arch/sparc/mm/generic_32.c b/arch/sparc/mm/generic_32.c deleted file mode 100644 index 6ca39a60a196..000000000000 --- a/arch/sparc/mm/generic_32.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * generic.c: Generic Sparc mm routines that are not dependent upon - * MMU type but are Sparc specific. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* Remap IO memory, the same way as remap_pfn_range(), but use - * the obio memory space. - * - * They use a pgprot that sets PAGE_IO and does not check the - * mem_map table as this is independent of normal memory. - */ -static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - do { - set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space)); - address += PAGE_SIZE; - offset += PAGE_SIZE; - pte++; - } while (address < end); -} - -static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - offset -= address; - do { - pte_t *pte = pte_alloc_map(mm, NULL, pmd, address); - if (!pte) - return -ENOMEM; - io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address < end); - return 0; -} - -int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, unsigned long size, pgprot_t prot) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - int space = GET_IOSPACE(pfn); - unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; - - /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; - vma->vm_pgoff = (offset >> PAGE_SHIFT) | - ((unsigned long)space << 28UL); - - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - while (from < end) { - pmd_t *pmd = pmd_alloc(mm, dir, from); - error = -ENOMEM; - if (!pmd) - break; - error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - - flush_tlb_range(vma, beg, end); - return error; -} -EXPORT_SYMBOL(io_remap_pfn_range); diff --git a/arch/sparc/mm/generic_64.c b/arch/sparc/mm/generic_64.c deleted file mode 100644 index 9b357ddae39d..000000000000 --- a/arch/sparc/mm/generic_64.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * generic.c: Generic Sparc mm routines that are not dependent upon - * MMU type but are Sparc specific. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Remap IO memory, the same way as remap_pfn_range(), but use - * the obio memory space. - * - * They use a pgprot that sets PAGE_IO and does not check the - * mem_map table as this is independent of normal memory. - */ -static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, - unsigned long address, - unsigned long size, - unsigned long offset, pgprot_t prot, - int space) -{ - unsigned long end; - - /* clear hack bit that was used as a write_combine side-effect flag */ - offset &= ~0x1UL; - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - do { - pte_t entry; - unsigned long curend = address + PAGE_SIZE; - - entry = mk_pte_io(offset, prot, space, PAGE_SIZE); - if (!(address & 0xffff)) { - if (PAGE_SIZE < (4 * 1024 * 1024) && - !(address & 0x3fffff) && - !(offset & 0x3ffffe) && - end >= address + 0x400000) { - entry = mk_pte_io(offset, prot, space, - 4 * 1024 * 1024); - curend = address + 0x400000; - offset += 0x400000; - } else if (PAGE_SIZE < (512 * 1024) && - !(address & 0x7ffff) && - !(offset & 0x7fffe) && - end >= address + 0x80000) { - entry = mk_pte_io(offset, prot, space, - 512 * 1024 * 1024); - curend = address + 0x80000; - offset += 0x80000; - } else if (PAGE_SIZE < (64 * 1024) && - !(offset & 0xfffe) && - end >= address + 0x10000) { - entry = mk_pte_io(offset, prot, space, - 64 * 1024); - curend = address + 0x10000; - offset += 0x10000; - } else - offset += PAGE_SIZE; - } else - offset += PAGE_SIZE; - - if (pte_write(entry)) - entry = pte_mkdirty(entry); - do { - BUG_ON(!pte_none(*pte)); - set_pte_at(mm, address, pte, entry); - address += PAGE_SIZE; - pte_val(entry) += PAGE_SIZE; - pte++; - } while (address < curend); - } while (address < end); -} - -static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - offset -= address; - do { - pte_t *pte = pte_alloc_map(mm, NULL, pmd, address); - if (!pte) - return -ENOMEM; - io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space); - pte_unmap(pte); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address < end); - return 0; -} - -static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PUD_MASK; - end = address + size; - if (end > PUD_SIZE) - end = PUD_SIZE; - offset -= address; - do { - pmd_t *pmd = pmd_alloc(mm, pud, address); - if (!pud) - return -ENOMEM; - io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space); - address = (address + PUD_SIZE) & PUD_MASK; - pud++; - } while (address < end); - return 0; -} - -int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, unsigned long size, pgprot_t prot) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - int space = GET_IOSPACE(pfn); - unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; - unsigned long phys_base; - - phys_base = offset | (((unsigned long) space) << 32UL); - - /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; - vma->vm_pgoff = phys_base >> PAGE_SHIFT; - - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - while (from < end) { - pud_t *pud = pud_alloc(mm, dir, from); - error = -ENOMEM; - if (!pud) - break; - error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - - flush_tlb_range(vma, beg, end); - return error; -} -EXPORT_SYMBOL(io_remap_pfn_range); From 738a849c8eef4787a526d95763f985b8c1cb68e4 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 17 Nov 2011 14:37:23 +0000 Subject: [PATCH 631/692] sky2: enforce minimum ring size The hardware has a restriction that the minimum ring size possible is 128. The number of elements used is controlled by tx_pending and the overall number of elements in the ring tx_ring_size, therefore it is okay to limit the number of elements in use to a small value (63) but still provide a bigger ring. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 539de09cffc9..d99687177704 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4088,6 +4088,16 @@ static int sky2_set_coalesce(struct net_device *dev, return 0; } +/* + * Hardware is limited to min of 128 and max of 2048 for ring size + * and rounded up to next power of two + * to avoid division in modulus calclation + */ +static unsigned long roundup_ring_size(unsigned long pending) +{ + return max(128ul, roundup_pow_of_two(pending+1)); +} + static void sky2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { @@ -4115,7 +4125,7 @@ static int sky2_set_ringparam(struct net_device *dev, sky2->rx_pending = ering->rx_pending; sky2->tx_pending = ering->tx_pending; - sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1); + sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending); return sky2_reattach(dev); } @@ -4709,7 +4719,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; - sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1); + sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING); sky2->rx_pending = RX_DEF_PENDING; hw->dev[port] = dev; From 282edcece39e08d02c22492d593e4b9b94a65dff Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 17 Nov 2011 14:37:35 +0000 Subject: [PATCH 632/692] sky2: fix hang in napi_disable If IRQ was never initialized, then calling napi_disable() would hang. Add more bookkeeping to track whether IRQ was ever initialized. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 17 ++++++++++------- drivers/net/ethernet/marvell/sky2.h | 1 + 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index d99687177704..7803efa46eb2 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1723,6 +1723,8 @@ static int sky2_setup_irq(struct sky2_hw *hw, const char *name) if (err) dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); else { + hw->flags |= SKY2_HW_IRQ_SETUP; + napi_enable(&hw->napi); sky2_write32(hw, B0_IMSK, Y2_IS_BASE); sky2_read32(hw, B0_IMSK); @@ -2120,6 +2122,7 @@ static int sky2_close(struct net_device *dev) napi_disable(&hw->napi); free_irq(hw->pdev->irq, hw); + hw->flags &= ~SKY2_HW_IRQ_SETUP; } else { u32 imask; @@ -3423,12 +3426,13 @@ static void sky2_all_down(struct sky2_hw *hw) { int i; - sky2_read32(hw, B0_IMSK); - sky2_write32(hw, B0_IMSK, 0); + if (hw->flags & SKY2_HW_IRQ_SETUP) { + sky2_read32(hw, B0_IMSK); + sky2_write32(hw, B0_IMSK, 0); - if (hw->ports > 1 || netif_running(hw->dev[0])) synchronize_irq(hw->pdev->irq); - napi_disable(&hw->napi); + napi_disable(&hw->napi); + } for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; @@ -3445,7 +3449,7 @@ static void sky2_all_down(struct sky2_hw *hw) static void sky2_all_up(struct sky2_hw *hw) { - u32 imask = 0; + u32 imask = Y2_IS_BASE; int i; for (i = 0; i < hw->ports; i++) { @@ -3461,8 +3465,7 @@ static void sky2_all_up(struct sky2_hw *hw) netif_wake_queue(dev); } - if (imask || hw->ports > 1) { - imask |= Y2_IS_BASE; + if (hw->flags & SKY2_HW_IRQ_SETUP) { sky2_write32(hw, B0_IMSK, imask); sky2_read32(hw, B0_IMSK); sky2_read32(hw, B0_Y2_SP_LISR); diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index 0af31b8b5f10..ff6f58bf822a 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2287,6 +2287,7 @@ struct sky2_hw { #define SKY2_HW_RSS_BROKEN 0x00000100 #define SKY2_HW_VLAN_BROKEN 0x00000200 #define SKY2_HW_RSS_CHKSUM 0x00000400 /* RSS requires chksum */ +#define SKY2_HW_IRQ_SETUP 0x00000800 u8 chip_id; u8 chip_rev; From 0b64120cceb86e93cb1bda0dc055f13016646907 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2011 22:44:58 -0800 Subject: [PATCH 633/692] sparc64: Patch sun4v code sequences properly on module load. Some of the sun4v code patching occurs in inline functions visible to, and usable by, modules. Therefore we have to patch them up during module load. Signed-off-by: David S. Miller --- arch/sparc/kernel/entry.h | 7 ++++ arch/sparc/kernel/module.c | 27 ++++++++++++++++ arch/sparc/kernel/setup_64.c | 62 +++++++++++++++++++++--------------- 3 files changed, 70 insertions(+), 26 deletions(-) diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h index e27f8ea8656e..0c218e4c0881 100644 --- a/arch/sparc/kernel/entry.h +++ b/arch/sparc/kernel/entry.h @@ -42,6 +42,9 @@ extern void fpsave(unsigned long *fpregs, unsigned long *fsr, extern void fpload(unsigned long *fpregs, unsigned long *fsr); #else /* CONFIG_SPARC32 */ + +#include + struct popc_3insn_patch_entry { unsigned int addr; unsigned int insns[3]; @@ -57,6 +60,10 @@ extern struct popc_6insn_patch_entry __popc_6insn_patch, __popc_6insn_patch_end; extern void __init per_cpu_patch(void); +extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *, + struct sun4v_1insn_patch_entry *); +extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *, + struct sun4v_2insn_patch_entry *); extern void __init sun4v_patch(void); extern void __init boot_cpu_id_too_large(int cpu); extern unsigned int dcache_parity_tl1_occurred; diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index da0c6c70ccb2..e5519870c3d9 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -17,6 +17,8 @@ #include #include +#include "entry.h" + #ifdef CONFIG_SPARC64 #include @@ -203,6 +205,29 @@ int apply_relocate_add(Elf_Shdr *sechdrs, } #ifdef CONFIG_SPARC64 +static void do_patch_sections(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs) +{ + const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name)) + sun4v_1insn = s; + if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name)) + sun4v_2insn = s; + } + + if (sun4v_1insn && tlb_type == hypervisor) { + void *p = (void *) sun4v_1insn->sh_addr; + sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size); + } + if (sun4v_2insn && tlb_type == hypervisor) { + void *p = (void *) sun4v_2insn->sh_addr; + sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size); + } +} + int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) @@ -210,6 +235,8 @@ int module_finalize(const Elf_Ehdr *hdr, /* make jump label nops */ jump_label_apply_nops(me); + do_patch_sections(hdr, sechdrs); + /* Cheetah's I-cache is fully coherent. */ if (tlb_type == spitfire) { unsigned long va; diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index c965595aa7e9..a854a1c240ff 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -234,40 +234,50 @@ void __init per_cpu_patch(void) } } +void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start, + struct sun4v_1insn_patch_entry *end) +{ + while (start < end) { + unsigned long addr = start->addr; + + *(unsigned int *) (addr + 0) = start->insn; + wmb(); + __asm__ __volatile__("flush %0" : : "r" (addr + 0)); + + start++; + } +} + +void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start, + struct sun4v_2insn_patch_entry *end) +{ + while (start < end) { + unsigned long addr = start->addr; + + *(unsigned int *) (addr + 0) = start->insns[0]; + wmb(); + __asm__ __volatile__("flush %0" : : "r" (addr + 0)); + + *(unsigned int *) (addr + 4) = start->insns[1]; + wmb(); + __asm__ __volatile__("flush %0" : : "r" (addr + 4)); + + start++; + } +} + void __init sun4v_patch(void) { extern void sun4v_hvapi_init(void); - struct sun4v_1insn_patch_entry *p1; - struct sun4v_2insn_patch_entry *p2; if (tlb_type != hypervisor) return; - p1 = &__sun4v_1insn_patch; - while (p1 < &__sun4v_1insn_patch_end) { - unsigned long addr = p1->addr; + sun4v_patch_1insn_range(&__sun4v_1insn_patch, + &__sun4v_1insn_patch_end); - *(unsigned int *) (addr + 0) = p1->insn; - wmb(); - __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - - p1++; - } - - p2 = &__sun4v_2insn_patch; - while (p2 < &__sun4v_2insn_patch_end) { - unsigned long addr = p2->addr; - - *(unsigned int *) (addr + 0) = p2->insns[0]; - wmb(); - __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - - *(unsigned int *) (addr + 4) = p2->insns[1]; - wmb(); - __asm__ __volatile__("flush %0" : : "r" (addr + 4)); - - p2++; - } + sun4v_patch_2insn_range(&__sun4v_2insn_patch, + &__sun4v_2insn_patch_end); sun4v_hvapi_init(); } From f9dfb65b055c56678afa03e13e942761459ea53d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 18 Nov 2011 17:05:30 +0530 Subject: [PATCH 634/692] ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 30e2befd6f2a..8b4c2535b266 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -747,6 +747,18 @@ sub __eval_option { # Add space to evaluate the character before $ $option = " $option"; my $retval = ""; + my $repeated = 0; + my $parent = 0; + + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + + $repeated = 1; + $parent = $test; + last; + } + } while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { my $start = $1; @@ -760,10 +772,14 @@ sub __eval_option { # otherwise see if the default OPT (without [$i]) exists. my $o = "$var\[$i\]"; + my $parento = "$var\[$parent\]"; if (defined($opt{$o})) { $o = $opt{$o}; $retval = "$retval$o"; + } elsif ($repeated && defined($opt{$parento})) { + $o = $opt{$parento}; + $retval = "$retval$o"; } elsif (defined($opt{$var})) { $o = $opt{$var}; $retval = "$retval$o"; From 91a13c281d7d4648c0b32dede11a0144c4e7984c Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 17 Nov 2011 11:08:32 +0100 Subject: [PATCH 635/692] drivers/base/node.c: fix compilation error with older versions of gcc Patch to fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Acked-by: David Rientjes Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/node.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/base/node.c b/drivers/base/node.c index 793f796c4da3..5693ecee9a40 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_WRITEBACK)), nid, K(node_page_state(nid, NR_FILE_PAGES)), nid, K(node_page_state(nid, NR_FILE_MAPPED)), - nid, K(node_page_state(nid, NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_ANON_PAGES) + node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + nid, K(node_page_state(nid, NR_ANON_PAGES)), #endif - ), nid, K(node_page_state(nid, NR_SHMEM)), nid, node_page_state(nid, NR_KERNEL_STACK) * THREAD_SIZE / 1024, @@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) + node_page_state(nid, NR_SLAB_UNRECLAIMABLE)), nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)), - nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) , nid, K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR) + HPAGE_PMD_NR)); +#else + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))); #endif - ); n += hugetlb_report_node_meminfo(nid, buf + n); return n; } From 6ac2afb3f4601d74778a6ef76c50813a5b85b133 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 18 Nov 2011 11:05:10 +0100 Subject: [PATCH 636/692] misc: ad525x_dpot: Fix AD8400 spi transfer size. AD8400 type devices require 16-bit command transfers. Signed-off-by: Michael Hennerich Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ad525x_dpot.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h index a662f5987b68..82b2cb77ae19 100644 --- a/drivers/misc/ad525x_dpot.h +++ b/drivers/misc/ad525x_dpot.h @@ -100,7 +100,7 @@ enum dpot_devid { AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27), AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, BRDAC0, 7, 28), - AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, + AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0, 8, 29), AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0 | BRDAC1, 8, 30), From e253dec31b3ffc2bf19aa8c29865ab7254e90c29 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Fri, 18 Nov 2011 12:12:41 +0530 Subject: [PATCH 637/692] usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-xls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c index fe74bd676018..b4fb511d24bc 100644 --- a/drivers/usb/host/ehci-xls.c +++ b/drivers/usb/host/ehci-xls.c @@ -19,7 +19,7 @@ static int ehci_xls_setup(struct usb_hcd *hcd) ehci->caps = hcd->regs; ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); dbg_hcs_params(ehci, "reset"); dbg_hcc_params(ehci, "reset"); From 46b5a277ed90317a4d17e936c16037e76011b219 Mon Sep 17 00:00:00 2001 From: "zheng.zhijian@zte.com.cn" Date: Thu, 17 Nov 2011 19:23:25 +0800 Subject: [PATCH 638/692] USB: option: release new PID for ZTE 3G modem This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng Signed-off-by: wsalvin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b8da93b3615c..d59e37571d99 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -316,6 +316,9 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -504,6 +507,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -1047,6 +1062,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ From c61875977458637226ab093a35d200f2d5789787 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2011 16:41:45 -0500 Subject: [PATCH 639/692] OHCI: final fix for NVIDIA problems (I hope) Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern Tested-by: Andre "Osku" Schmidt Tested-by: Arno Augustin Cc: stable [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 15 ++++------ drivers/usb/host/ohci-pci.c | 26 ------------------ drivers/usb/host/ohci.h | 1 - drivers/usb/host/pci-quirks.c | 52 ++++++++++++++++------------------- 4 files changed, 29 insertions(+), 65 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34efd479e068..b2639191549e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd) struct ohci_hcd *ohci; ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); - /* If the SHUTDOWN quirk is set, don't put the controller in RESET */ - ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ? - OHCI_CTRL_RWC | OHCI_CTRL_HCFS : - OHCI_CTRL_RWC); - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); - /* flush the writes */ - (void) ohci_readl (ohci, &ohci->regs->control); + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); } static int check_ed(struct ohci_hcd *ohci, struct ed *ed) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index ad8166c681e2..bc01b064585a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } -/* nVidia controllers continue to drive Reset signalling on the bus - * even after system shutdown, wasting power. This flag tells the - * shutdown routine to leave the controller OPERATIONAL instead of RESET. - */ -static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) -{ - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - /* Evidently nVidia fixed their later hardware; this is a guess at - * the changeover point. - */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d - - if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) { - ohci->flags |= OHCI_QUIRK_SHUTDOWN; - ohci_dbg(ohci, "enabled nVidia shutdown quirk\n"); - } - - return 0; -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; @@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, - { - PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), - .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown, - }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 35e5fd640ce7..0795b934d00c 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -403,7 +403,6 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ -#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c7fd6ce11904..caf87428ca43 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -37,6 +37,7 @@ #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_FMINTERVAL 0x34 +#define OHCI_HCFS (3 << 6) /* hc functional state */ #define OHCI_HCR (1 << 0) /* host controller reset */ #define OHCI_OCR (1 << 3) /* ownership change request */ #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ @@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; + u32 fminterval; + int cnt; if (!mmio_resource_enabled(pdev, 0)) return; @@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) } #endif - /* reset controller, preserving RWC (and possibly IR) */ - writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); - readl(base + OHCI_CONTROL); + /* disable interrupts */ + writel((u32) ~0, base + OHCI_INTRDISABLE); - /* Some NVIDIA controllers stop working if kept in RESET for too long */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { - u32 fminterval; - int cnt; + /* Reset the USB bus, if the controller isn't already in RESET */ + if (control & OHCI_HCFS) { + /* Go into RESET, preserving RWC (and possibly IR) */ + writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); + readl(base + OHCI_CONTROL); - /* drive reset for at least 50 ms (7.1.7.5) */ + /* drive bus reset for at least 50 ms (7.1.7.5) */ msleep(50); - - /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); - writel(OHCI_HCR, base + OHCI_CMDSTATUS); - - /* reset requires max 10 us delay */ - for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ - if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) - break; - udelay(1); - } - writel(fminterval, base + OHCI_FMINTERVAL); - - /* Now we're in the SUSPEND state with all devices reset - * and wakeups and interrupts disabled - */ } - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); + /* software reset of the controller, preserving HcFmInterval */ + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); + /* reset requires max 10 us delay */ + for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ + if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) + break; + udelay(1); + } + writel(fminterval, base + OHCI_FMINTERVAL); + + /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); } From 4aa3648c719265bac9c2742c9ebb043e6dbdd790 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Thu, 17 Nov 2011 16:44:58 +0100 Subject: [PATCH 640/692] USB: option: add PID of Huawei E173s 3G modem Signed-off-by: Ferenc Wagner Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d59e37571d99..d865878c9f97 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 +#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -641,6 +642,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), From b1ffb4c851f185e9051ba837c16d9b84ef688d26 Mon Sep 17 00:00:00 2001 From: Andrew Worsley Date: Fri, 18 Nov 2011 23:13:33 +1100 Subject: [PATCH 641/692] USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley Cc: stable ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fe034d2d3e7..bd4298bb6750 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, From fb120c0a2775b0d2d095a99ea8432bfb5d444ab2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Nov 2011 04:40:20 +0000 Subject: [PATCH 642/692] ping: dont increment ICMP_MIB_INERRORS ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a frame not belonging to its own sockets. RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP messages which the entiry received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." Signed-off-by: Eric Dumazet CC: Vasiliy Kulikov Acked-by: Flavio Leitner Acked-by: Vasiliy Kulikov Signed-off-by: David S. Miller --- net/ipv4/ping.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index a06f73fdb3c0..43d4c3b22369 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -339,7 +339,6 @@ void ping_err(struct sk_buff *skb, u32 info) sk = ping_v4_lookup(net, iph->daddr, iph->saddr, ntohs(icmph->un.echo.id), skb->dev->ifindex); if (sk == NULL) { - ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS); pr_debug("no socket, dropping\n"); return; /* No socket for error */ } @@ -679,7 +678,6 @@ static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n", inet_sk(sk), inet_sk(sk)->inet_num, skb); if (sock_queue_rcv_skb(sk, skb) < 0) { - ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS); kfree_skb(skb); pr_debug("ping_queue_rcv_skb -> failed\n"); return -1; From c8891329131f791e0ddc422eaf6fc86e9a8cf8f5 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 18 Nov 2011 17:21:05 +0000 Subject: [PATCH 643/692] MAINTAINERS: update XFS maintainer entry I will no longer be maintaining XFS for SGI. Ben Myers (bpm@sgi.com) has agreed to be the primary maintainer for XFS in my place. I will continue to be able to push commits to the SGI XFS tree if required. As such I will continue to be a designated XFS maintainer, but plan to serve in more of a backup role. Signed-off-by: Alex Elder Signed-off-by: Ben Myers --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256446f2..227cd7ccf816 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7425,7 +7425,8 @@ F: drivers/xen/*swiotlb* XFS FILESYSTEM P: Silicon Graphics Inc -M: Alex Elder +M: Ben Myers +M: Alex Elder M: xfs-masters@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs From 9cc20b268a5a14f5e57b8ad405a83513ab0d78dc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 18 Nov 2011 15:24:32 -0500 Subject: [PATCH 644/692] ipv4: fix redirect handling commit f39925dbde77 (ipv4: Cache learned redirect information in inetpeer.) introduced a regression in ICMP redirect handling. It assumed ipv4_dst_check() would be called because all possible routes were attached to the inetpeer we modify in ip_rt_redirect(), but thats not true. commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix this but solution was not complete. (It fixed only one route) So we must lookup existing routes (including different TOS values) and call check_peer_redir() on them. Reported-by: Ivan Zahariev Signed-off-by: Eric Dumazet CC: Flavio Leitner Signed-off-by: David S. Miller --- net/ipv4/route.c | 112 +++++++++++++++++++++++++---------------------- 1 file changed, 60 insertions(+), 52 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 511f4a75149c..0c74da8a0473 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1304,16 +1304,42 @@ static void rt_del(unsigned hash, struct rtable *rt) spin_unlock_bh(rt_hash_lock_addr(hash)); } +static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) +{ + struct rtable *rt = (struct rtable *) dst; + __be32 orig_gw = rt->rt_gateway; + struct neighbour *n, *old_n; + + dst_confirm(&rt->dst); + + rt->rt_gateway = peer->redirect_learned.a4; + + n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); + if (IS_ERR(n)) + return PTR_ERR(n); + old_n = xchg(&rt->dst._neighbour, n); + if (old_n) + neigh_release(old_n); + if (!n || !(n->nud_state & NUD_VALID)) { + if (n) + neigh_event_send(n, NULL); + rt->rt_gateway = orig_gw; + return -EAGAIN; + } else { + rt->rt_flags |= RTCF_REDIRECTED; + call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); + } + return 0; +} + /* called in rcu_read_lock() section */ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, __be32 saddr, struct net_device *dev) { int s, i; struct in_device *in_dev = __in_dev_get_rcu(dev); - struct rtable *rt; __be32 skeys[2] = { saddr, 0 }; int ikeys[2] = { dev->ifindex, 0 }; - struct flowi4 fl4; struct inet_peer *peer; struct net *net; @@ -1336,33 +1362,42 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, goto reject_redirect; } - memset(&fl4, 0, sizeof(fl4)); - fl4.daddr = daddr; for (s = 0; s < 2; s++) { for (i = 0; i < 2; i++) { - fl4.flowi4_oif = ikeys[i]; - fl4.saddr = skeys[s]; - rt = __ip_route_output_key(net, &fl4); - if (IS_ERR(rt)) - continue; + unsigned int hash; + struct rtable __rcu **rthp; + struct rtable *rt; - if (rt->dst.error || rt->dst.dev != dev || - rt->rt_gateway != old_gw) { - ip_rt_put(rt); - continue; + hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net)); + + rthp = &rt_hash_table[hash].chain; + + while ((rt = rcu_dereference(*rthp)) != NULL) { + rthp = &rt->dst.rt_next; + + if (rt->rt_key_dst != daddr || + rt->rt_key_src != skeys[s] || + rt->rt_oif != ikeys[i] || + rt_is_input_route(rt) || + rt_is_expired(rt) || + !net_eq(dev_net(rt->dst.dev), net) || + rt->dst.error || + rt->dst.dev != dev || + rt->rt_gateway != old_gw) + continue; + + if (!rt->peer) + rt_bind_peer(rt, rt->rt_dst, 1); + + peer = rt->peer; + if (peer) { + if (peer->redirect_learned.a4 != new_gw) { + peer->redirect_learned.a4 = new_gw; + atomic_inc(&__rt_peer_genid); + } + check_peer_redir(&rt->dst, peer); + } } - - if (!rt->peer) - rt_bind_peer(rt, rt->rt_dst, 1); - - peer = rt->peer; - if (peer) { - peer->redirect_learned.a4 = new_gw; - atomic_inc(&__rt_peer_genid); - } - - ip_rt_put(rt); - return; } } return; @@ -1649,33 +1684,6 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } } -static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) -{ - struct rtable *rt = (struct rtable *) dst; - __be32 orig_gw = rt->rt_gateway; - struct neighbour *n, *old_n; - - dst_confirm(&rt->dst); - - rt->rt_gateway = peer->redirect_learned.a4; - - n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); - if (IS_ERR(n)) - return PTR_ERR(n); - old_n = xchg(&rt->dst._neighbour, n); - if (old_n) - neigh_release(old_n); - if (!n || !(n->nud_state & NUD_VALID)) { - if (n) - neigh_event_send(n, NULL); - rt->rt_gateway = orig_gw; - return -EAGAIN; - } else { - rt->rt_flags |= RTCF_REDIRECTED; - call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); - } - return 0; -} static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) { From aa9a7b11821e883a7b93ecce190881e0ea48648b Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Fri, 18 Nov 2011 23:02:42 +0100 Subject: [PATCH 645/692] PM / Hibernate: Fix the early termination of test modes Commit 2aede851ddf08666f68ffc17be446420e9d2a056 (PM / Hibernate: Freeze kernel threads after preallocating memory) postponed the freezing of kernel threads to after preallocating memory for hibernation. But while doing that, the hibernation test TEST_FREEZER and the test mode HIBERNATION_TESTPROC were not moved accordingly. As a result, when using these test modes, it only goes upto the freezing of userspace and exits, when in fact it should go till the complete end of task freezing stage, namely the freezing of kernel threads as well. So, move these points of exit to appropriate places so that freezing of kernel threads is also tested while using these test harnesses. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- kernel/power/hibernate.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index b4511b6d3ef9..196c01268ebd 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -55,6 +55,8 @@ enum { static int hibernation_mode = HIBERNATION_SHUTDOWN; +static bool freezer_test_done; + static const struct platform_hibernation_ops *hibernation_ops; /** @@ -347,6 +349,17 @@ int hibernation_snapshot(int platform_mode) if (error) goto Close; + if (hibernation_test(TEST_FREEZER) || + hibernation_testmode(HIBERNATION_TESTPROC)) { + + /* + * Indicate to the caller that we are returning due to a + * successful freezer test. + */ + freezer_test_done = true; + goto Close; + } + error = dpm_prepare(PMSG_FREEZE); if (error) goto Complete_devices; @@ -641,15 +654,13 @@ int hibernate(void) if (error) goto Finish; - if (hibernation_test(TEST_FREEZER)) - goto Thaw; - - if (hibernation_testmode(HIBERNATION_TESTPROC)) - goto Thaw; - error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM); if (error) goto Thaw; + if (freezer_test_done) { + freezer_test_done = false; + goto Thaw; + } if (in_suspend) { unsigned int flags = 0; From 860ca0e6f72d21ded33ce14be9a53eb103f88441 Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Fri, 18 Nov 2011 14:22:09 -0800 Subject: [PATCH 646/692] cgroup: Replace Paul Menage with Tejun Heo as cgroups maintainer As is probably painfully obvious, I don't have time to be a cgroups maintainer. Rather than have me continue to hope that I'll magically find more spare time, instead Tejun has kindly agreed to take over the role, along with Li Zefan. -tj: added cgroup tree URL to MAINTAINERS file Signed-off-by: Paul Menage Acked-by: Li Zefan Signed-off-by: Tejun Heo LKML-Reference: <1321320612-57855-1-git-send-email-paul@paulmenage.org> --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7f6bc290d455..78751bbfa91a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1927,10 +1927,11 @@ S: Maintained F: drivers/connector/ CONTROL GROUPS (CGROUPS) -M: Paul Menage +M: Tejun Heo M: Li Zefan L: containers@lists.linux-foundation.org L: cgroups@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained F: include/linux/cgroup* F: kernel/cgroup* From 2e9ff8d917af622785b5b9f46d849b7eee43b29c Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Fri, 4 Nov 2011 17:58:02 +0000 Subject: [PATCH 647/692] linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled Randy Dunlap reports that the ex131x driver doesn't build when CONFIG_PM_SLEEP is not enabled. This bug was introduced when moving code around to remove some forward declarations earlier, the #endif part of #ifdef CONFIG_PM_SLEEP was not moved at the same time. Now fixed by moving it to its proper place. Reported-by: Randy Dunlap Signed-off-by: Mark Einon Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et131x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index f5f44a02456f..0c1c6ca8c379 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -4469,6 +4469,12 @@ static int et131x_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); +#define ET131X_PM_OPS (&et131x_pm_ops) +#else +#define ET131X_PM_OPS NULL +#endif + /* ISR functions */ /** @@ -5470,12 +5476,6 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, return result; } -static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); -#define ET131X_PM_OPS (&et131x_pm_ops) -#else -#define ET131X_PM_OPS NULL -#endif - static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = { { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, From 07de7a5ecbd241507bf1d521e56692842a3e70d4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Nov 2011 14:43:09 -0700 Subject: [PATCH 648/692] staging: slicoss depends on NET The slicoss driver uses network interfaces so it should depend on NET. Fixes the following build errors: ERROR: "eth_change_mtu" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "register_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "netif_rx" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_put" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_pull" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__alloc_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "free_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "consume_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "dev_kfree_skb_irq" [drivers/staging/slicoss/slicoss.ko] undefined! Signed-off-by: Randy Dunlap Cc: Lior Dotan Cc: Christopher Harrer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/slicoss/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/slicoss/Kconfig b/drivers/staging/slicoss/Kconfig index 5cde96b2e6e1..5c2a15b42dfe 100644 --- a/drivers/staging/slicoss/Kconfig +++ b/drivers/staging/slicoss/Kconfig @@ -1,6 +1,6 @@ config SLICOSS tristate "Alacritech Gigabit IS-NIC support" - depends on PCI && X86 + depends on PCI && X86 && NET default n help This driver supports Alacritech's IS-NIC gigabit ethernet cards. From 0337510f7cef9d569811b058a33306943c685ef6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 3 Nov 2011 14:24:00 -0700 Subject: [PATCH 649/692] staging: et131x depends on NET ET131X uses netdev interfaces so it should depend on NET. Fixes these build errors: ERROR: "ethtool_op_get_link" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "register_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_detach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_attach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "free_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_alloc_skb" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_rx" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "skb_put" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 9e1864c6dfd0..98a165328e4e 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,6 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI + depends on PCI && NET default n ---help--- This driver supports Agere ET-1310 ethernet adapters. From c9fb041ff13c3b7b599fce6fb63cb903d69945d6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 15 Nov 2011 17:04:12 -0800 Subject: [PATCH 650/692] staging: fix more ET131X build errors ET131X is a network device, so it should depend on NETDEVICES. (This part won't be needed when the driver moves to drivers/net/.) It also uses PHYLIB interfaces, so it should select PHYLIB. Fixes these build errors: ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: : Mark Einon Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 98a165328e4e..8190f2aaf53b 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,7 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI && NET + depends on PCI && NET && NETDEVICES + select PHYLIB default n ---help--- This driver supports Agere ET-1310 ethernet adapters. From a5c86e986f0b2fe779f13cf53ce6e9f467b03950 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Sat, 19 Nov 2011 02:33:57 -0800 Subject: [PATCH 651/692] hugetlb: remove dummy definitions of HPAGE_MASK and HPAGE_SIZE Dummy, non-zero definitions for HPAGE_MASK and HPAGE_SIZE were added in 51c6f666fceb ("mm: ZAP_BLOCK causes redundant work") to avoid a divide by zero in generic kernel code. That code has since been removed, but probably should never have been added in the first place: we don't want HPAGE_SIZE to act like PAGE_SIZE for code that is working with hugepages, for example, when the dependency on CONFIG_HUGETLB_PAGE has not been fulfilled. Because hugepage size can differ from architecture to architecture, each is required to have their own definitions for both HPAGE_MASK and HPAGE_SIZE. This is always done in arch/*/include/asm/page.h. So, just remove the dummy and dangerous definitions since they are no longer needed and reveals the correct dependencies. Tested on architectures using the definitions with allyesconfig: x86 (even with thp), hppa, mips, powerpc, s390, sh3, sh4, sparc, and sparc64, and with defconfig on ia64. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 19644e0016bd..d9d6c868b86b 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -110,11 +110,6 @@ static inline void copy_huge_page(struct page *dst, struct page *src) #define hugetlb_change_protection(vma, address, end, newprot) -#ifndef HPAGE_MASK -#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */ -#define HPAGE_SIZE PAGE_SIZE -#endif - #endif /* !CONFIG_HUGETLB_PAGE */ #define HUGETLB_ANON_FILE "anon_hugepage" From d633180c20271d3b7c1fabbccbc7c5b30ad12be4 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 18 Nov 2011 15:56:06 -0800 Subject: [PATCH 652/692] Xen: update MAINTAINER info No longer at Citrix, still interested in Xen. Signed-off-by: Jeremy Fitzhardinge Cc: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 48fe11cc2306..1e7cc42a69ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4950,7 +4950,7 @@ F: drivers/char/ppdev.c F: include/linux/ppdev.h PARAVIRT_OPS INTERFACE -M: Jeremy Fitzhardinge +M: Jeremy Fitzhardinge M: Chris Wright M: Alok Kataria M: Rusty Russell @@ -7402,8 +7402,8 @@ S: Maintained F: arch/x86/kernel/cpu/mcheck/* XEN HYPERVISOR INTERFACE -M: Jeremy Fitzhardinge M: Konrad Rzeszutek Wilk +M: Jeremy Fitzhardinge L: xen-devel@lists.xensource.com (moderated for non-subscribers) L: virtualization@lists.linux-foundation.org S: Supported From 501a708f18ef911328ffd39f39738b8a7862aa8e Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Sat, 19 Nov 2011 14:37:57 +0100 Subject: [PATCH 653/692] PM / Suspend: Fix bug in suspend statistics update After commit 2a77c46de1e3dace73745015635ebbc648eca69c (PM / Suspend: Add statistics debugfs file for suspend to RAM) a missing pair of braces inside the state_store() function causes even invalid arguments to suspend to be wrongly treated as failed suspend attempts. Fix this. [rjw: Put the hash/subject of the buggy commit into the changelog.] Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- kernel/power/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/power/main.c b/kernel/power/main.c index 71f49fe4377e..36e0f0903c32 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -290,13 +290,14 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) break; } - if (state < PM_SUSPEND_MAX && *s) + if (state < PM_SUSPEND_MAX && *s) { error = enter_state(state); if (error) { suspend_stats.fail++; dpm_save_failed_errno(error); } else suspend_stats.success++; + } #endif Exit: From 016e8d44bc06dd3322f26712bdd3f3a6973592d0 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 19 Aug 2011 14:50:26 -0400 Subject: [PATCH 654/692] fs/minix: Verify bitmap block counts before mounting Newer versions of MINIX can create filesystems that allocate an extra bitmap block. Mounting of this succeeds, but doing a statfs call will result in an oops in count_free because of a negative number being used for the bh index. Avoid this by verifying the number of allocated blocks at mount time, erroring out if there are not enough and make statfs ignore the extras if there are too many. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=18792 Signed-off-by: Josh Boyer Signed-off-by: Al Viro --- fs/minix/bitmap.c | 18 ++++++++++++------ fs/minix/inode.c | 25 +++++++++++++++++++++++-- fs/minix/minix.h | 9 +++++++-- 3 files changed, 42 insertions(+), 10 deletions(-) diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 3f32bcb0d9bd..7c82c29429d7 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -20,10 +20,11 @@ static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits) +static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { unsigned i, j, sum = 0; struct buffer_head *bh; + unsigned numblocks = minix_blocks_needed(numbits, blocksize); for (i=0; is_zmap, sbi->s_zmap_blocks, - sbi->s_nzones - sbi->s_firstdatazone + 1) + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1); + + return (count_free(sbi->s_zmap, sb->s_blocksize, bits) << sbi->s_log_zone_size); } @@ -273,7 +276,10 @@ struct inode *minix_new_inode(const struct inode *dir, int mode, int *error) return inode; } -unsigned long minix_count_free_inodes(struct minix_sb_info *sbi) +unsigned long minix_count_free_inodes(struct super_block *sb) { - return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1); + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_ninodes + 1; + + return count_free(sbi->s_imap, sb->s_blocksize, bits); } diff --git a/fs/minix/inode.c b/fs/minix/inode.c index 64cdcd662ffc..1d9e33966db0 100644 --- a/fs/minix/inode.c +++ b/fs/minix/inode.c @@ -279,6 +279,27 @@ static int minix_fill_super(struct super_block *s, void *data, int silent) else if (sbi->s_mount_state & MINIX_ERROR_FS) printk("MINIX-fs: mounting file system with errors, " "running fsck is recommended\n"); + + /* Apparently minix can create filesystems that allocate more blocks for + * the bitmaps than needed. We simply ignore that, but verify it didn't + * create one with not enough blocks and bail out if so. + */ + block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize); + if (sbi->s_imap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "imap blocks allocated. Refusing to mount\n"); + goto out_iput; + } + + block = minix_blocks_needed( + (sbi->s_nzones - (sbi->s_firstdatazone + 1)), + s->s_blocksize); + if (sbi->s_zmap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "zmap blocks allocated. Refusing to mount.\n"); + goto out_iput; + } + return 0; out_iput: @@ -339,10 +360,10 @@ static int minix_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_type = sb->s_magic; buf->f_bsize = sb->s_blocksize; buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size; - buf->f_bfree = minix_count_free_blocks(sbi); + buf->f_bfree = minix_count_free_blocks(sb); buf->f_bavail = buf->f_bfree; buf->f_files = sbi->s_ninodes; - buf->f_ffree = minix_count_free_inodes(sbi); + buf->f_ffree = minix_count_free_inodes(sb); buf->f_namelen = sbi->s_namelen; buf->f_fsid.val[0] = (u32)id; buf->f_fsid.val[1] = (u32)(id >> 32); diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 341e2122879a..6415fe0d2385 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -48,10 +48,10 @@ extern struct minix_inode * minix_V1_raw_inode(struct super_block *, ino_t, stru extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **); extern struct inode * minix_new_inode(const struct inode *, int, int *); extern void minix_free_inode(struct inode * inode); -extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_inodes(struct super_block *sb); extern int minix_new_block(struct inode * inode); extern void minix_free_block(struct inode *inode, unsigned long block); -extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_blocks(struct super_block *sb); extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *); extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len); @@ -88,6 +88,11 @@ static inline struct minix_inode_info *minix_i(struct inode *inode) return list_entry(inode, struct minix_inode_info, vfs_inode); } +static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize) +{ + return DIV_ROUND_UP(bits, blocksize * 8); +} + #if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \ defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED) From f1fd306a91f875e65af0e04855b23adda6831ac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 26 Aug 2011 22:38:50 -0400 Subject: [PATCH 655/692] minixfs: kill manual hweight(), simplify Signed-off-by: Al Viro --- fs/minix/bitmap.c | 43 +++++++++++++++---------------------------- fs/minix/minix.h | 2 +- 2 files changed, 16 insertions(+), 29 deletions(-) diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 7c82c29429d7..ef175cb8cfd8 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -16,39 +16,26 @@ #include #include -static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; - static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) +/* + * bitmap consists of blocks filled with 16bit words + * bit set == busy, bit clear == free + * endianness is a mess, but for counting zero bits it really doesn't matter... + */ +static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { - unsigned i, j, sum = 0; - struct buffer_head *bh; - unsigned numblocks = minix_blocks_needed(numbits, blocksize); - - for (i=0; ib_size; j++) - sum += nibblemap[bh->b_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; + __u32 sum = 0; + unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8); + + while (blocks--) { + unsigned words = blocksize / 2; + __u16 *p = (__u16 *)(*map++)->b_data; + while (words--) + sum += 16 - hweight16(*p++); } - if (numblocks==0 || !(bh=map[numblocks-1])) - return(0); - i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2; - for (j=0; jb_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; - } - - i = numbits%16; - if (i!=0) { - i = *(__u16 *)(&bh->b_data[j]) | ~((1<>4) & 0xf]; - sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf]; - } - return(sum); + return sum; } void minix_free_block(struct inode *inode, unsigned long block) diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 6415fe0d2385..26bbd55e82ea 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -130,7 +130,7 @@ static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) if (!size) return 0; - size = (size >> 4) + ((size & 15) > 0); + size >>= 4; while (*p++ == 0xffff) { if (--size == 0) return (p - addr) << 4; From e70f224c1938af208b64b02c5cec27889fefcaec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Tue, 25 Oct 2011 01:38:45 +0200 Subject: [PATCH 656/692] drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds a new optional chunk to the CS ioctl that specifies optional flags to the CS parser. Why this is useful is explained below. Note that some regs no longer need the NOP relocation packet if this feature is enabled. Tested on r300g and r600g with this flag disabled and enabled. Assume there are two contexts sharing the same mipmapped tiled texture. One context wants to render into the first mipmap and the other one wants to render into the last mipmap. As you probably know, the hardware has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps, but that only applies to samplers. (at least on r300-r500, though later hardware likely behaves the same) So we want to just re-set the tiling flags before rendering (writing packets), right? ... No. The contexts run in parallel, so they may set the tiling flags simultaneously and then fire their command streams also simultaneously. The last one setting the flags wins, the other one loses. Another problem is when one context wants to render into the first and the last mipmap in one CS. Impossible. It must flush before changing tiling flags and do the rendering into the smaller mipmaps in another CS. Yet another problem is that writing copy_blit in userspace would be a mess involving re-setting tiling flags to please the kernel, and causing races with other contexts at the same time. The only way out of this is to send tiling flags with each CS, ideally with each relocation. But we already do that through the registers. So let's just use what we have in the registers. Signed-off-by: Marek Olšák Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_cs.c | 92 +++++++++++++------------ drivers/gpu/drm/radeon/r300.c | 96 +++++++++++++++------------ drivers/gpu/drm/radeon/r600_cs.c | 26 +++++--- drivers/gpu/drm/radeon/radeon.h | 3 +- drivers/gpu/drm/radeon/radeon_cs.c | 11 ++- drivers/gpu/drm/radeon/radeon_drv.c | 3 +- include/drm/radeon_drm.h | 4 ++ 7 files changed, 136 insertions(+), 99 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 7fdfa8ea7570..38e1bda73d33 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -480,21 +480,23 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } break; case DB_Z_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } track->db_z_info = radeon_get_ib_value(p, idx); - ib[idx] &= ~Z_ARRAY_MODE(0xf); - track->db_z_info &= ~Z_ARRAY_MODE(0xf); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx] &= ~Z_ARRAY_MODE(0xf); + track->db_z_info &= ~Z_ARRAY_MODE(0xf); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else { + ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case DB_STENCIL_INFO: @@ -607,40 +609,44 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR5_INFO: case CB_COLOR6_INFO: case CB_COLOR7_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = (reg - CB_COLOR0_INFO) / 0x3c; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR8_INFO: case CB_COLOR9_INFO: case CB_COLOR10_INFO: case CB_COLOR11_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR0_PITCH: @@ -1311,10 +1317,12 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = evergreen_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 400b26df652a..c93bc64707e1 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -701,16 +701,21 @@ static int r300_packet0_check(struct radeon_cs_parser *p, return r; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_TXO_MACRO_TILE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_TXO_MICRO_TILE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_TXO_MICRO_TILE_SQUARE; + if (p->keep_tiling_flags) { + ib[idx] = (idx_value & 31) | /* keep the 1st 5 bits */ + ((idx_value & ~31) + (u32)reloc->lobj.gpu_offset); + } else { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_TXO_MACRO_TILE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_TXO_MICRO_TILE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_TXO_MICRO_TILE_SQUARE; - tmp = idx_value + ((u32)reloc->lobj.gpu_offset); - tmp |= tile_flags; - ib[idx] = tmp; + tmp = idx_value + ((u32)reloc->lobj.gpu_offset); + tmp |= tile_flags; + ib[idx] = tmp; + } track->textures[i].robj = reloc->robj; track->tex_dirty = true; break; @@ -760,24 +765,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, /* RB3D_COLORPITCH1 */ /* RB3D_COLORPITCH2 */ /* RB3D_COLORPITCH3 */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_COLOR_TILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_COLOR_MICROTILE_ENABLE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; + + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; } - - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_COLOR_TILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_COLOR_MICROTILE_ENABLE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; - - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; i = (reg - 0x4E38) >> 2; track->cb[i].pitch = idx_value & 0x3FFE; switch (((idx_value >> 21) & 0xF)) { @@ -843,25 +850,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4F24: /* ZB_DEPTHPITCH */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_DEPTHMACROTILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_DEPTHMICROTILE_TILED; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; + + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; } - - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_DEPTHMACROTILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_DEPTHMICROTILE_TILED; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; - - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; - track->zb.pitch = idx_value & 0x3FFC; track->zb_dirty = true; break; diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0a2e023c1557..cb1acffd2430 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -941,7 +941,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->db_depth_control = radeon_get_ib_value(p, idx); break; case R_028010_DB_DEPTH_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_warn(p->dev, "bad SET_CONTEXT_REG " @@ -992,7 +993,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case R_0280B4_CB_COLOR5_INFO: case R_0280B8_CB_COLOR6_INFO: case R_0280BC_CB_COLOR7_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); @@ -1291,10 +1293,12 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, mip_offset <<= 8; word0 = radeon_get_ib_value(p, idx + 0); - if (tiling_flags & RADEON_TILING_MACRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (tiling_flags & RADEON_TILING_MACRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (tiling_flags & RADEON_TILING_MICRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } word1 = radeon_get_ib_value(p, idx + 1); w0 = G_038000_TEX_WIDTH(word0) + 1; h0 = G_038004_TEX_HEIGHT(word1) + 1; @@ -1621,10 +1625,12 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = r600_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index fc5a1d642cb5..8227e76b5c70 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -611,7 +611,8 @@ struct radeon_cs_parser { struct radeon_ib *ib; void *track; unsigned family; - int parser_error; + int parser_error; + bool keep_tiling_flags; }; extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx); diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index ccaa243c1442..29afd71e0840 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -93,7 +93,7 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) { struct drm_radeon_cs *cs = data; uint64_t *chunk_array_ptr; - unsigned size, i; + unsigned size, i, flags = 0; if (!cs->num_chunks) { return 0; @@ -140,6 +140,10 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) if (p->chunks[i].length_dw == 0) return -EINVAL; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS && + !p->chunks[i].length_dw) { + return -EINVAL; + } p->chunks[i].length_dw = user_chunk.length_dw; p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data; @@ -155,6 +159,9 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[i].user_ptr, size)) { return -EFAULT; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS) { + flags = p->chunks[i].kdata[0]; + } } else { p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL); p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); @@ -174,6 +181,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].length_dw); return -EINVAL; } + + p->keep_tiling_flags = (flags & RADEON_CS_KEEP_TILING_FLAGS) != 0; return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index a0b35e909489..71499fc3daf5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -53,9 +53,10 @@ * 2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query * 2.10.0 - fusion 2D tiling * 2.11.0 - backend map, initial compute support for the CS checker + * 2.12.0 - RADEON_CS_KEEP_TILING_FLAGS */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 11 +#define KMS_DRIVER_MINOR 12 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index b65be6054a18..be94be6d6f17 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -874,6 +874,10 @@ struct drm_radeon_gem_pwrite { #define RADEON_CHUNK_ID_RELOCS 0x01 #define RADEON_CHUNK_ID_IB 0x02 +#define RADEON_CHUNK_ID_FLAGS 0x03 + +/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */ +#define RADEON_CS_KEEP_TILING_FLAGS 0x01 struct drm_radeon_cs_chunk { uint32_t chunk_id; From 95ef1e52922cf75b1ea2eae54ef886f2cc47eecb Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 15 Nov 2011 14:59:07 +0200 Subject: [PATCH 657/692] KVM guest: prevent tracing recursion with kvmclock Prevent tracing of preempt_disable() in get_cpu_var() in kvm_clock_read(). When CONFIG_DEBUG_PREEMPT is enabled, preempt_disable/enable() are traced and this causes the function_graph tracer to go into an infinite recursion. By open coding the preempt_disable() around the get_cpu_var(), we can use the notrace version which prevents preempt_disable/enable() from being traced and prevents the recursion. Based on a similar patch for Xen from Jeremy Fitzhardinge. Tested-by: Gleb Natapov Acked-by: Steven Rostedt Signed-off-by: Avi Kivity --- arch/x86/kernel/kvmclock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index c1a0188e29ae..44842d756b29 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -74,9 +74,10 @@ static cycle_t kvm_clock_read(void) struct pvclock_vcpu_time_info *src; cycle_t ret; - src = &get_cpu_var(hv_clock); + preempt_disable_notrace(); + src = &__get_cpu_var(hv_clock); ret = pvclock_clocksource_read(src); - put_cpu_var(hv_clock); + preempt_enable_notrace(); return ret; } From 387125fc722a8ed432066b85a552917343bdafca Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 18 Nov 2011 15:07:51 -0500 Subject: [PATCH 658/692] Btrfs: fix barrier flushes When btrfs is writing the super blocks, it send barrier flushes to make sure writeback caching drives get all the metadata on disk in the right order. But, we have two bugs in the way these are sent down. When doing full commits (not via the tree log), we are sending the barrier down before the last super when it should be going down before the first. In multi-device setups, we should be waiting for the barriers to complete on all devices before writing any of the supers. Both of these bugs can cause corruptions on power failures. We fix it with some new code to send down empty barriers to all devices before writing the first super. Alexandre Oliva found the multi-device bug. Arne Jansen did the async barrier loop. Signed-off-by: Chris Mason Reported-by: Alexandre Oliva --- fs/btrfs/disk-io.c | 145 +++++++++++++++++++++++++++++++++++++++------ fs/btrfs/volumes.h | 6 ++ 2 files changed, 134 insertions(+), 17 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b6a5c0dd0dd8..48d30138237f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2573,22 +2573,10 @@ static int write_dev_supers(struct btrfs_device *device, int errors = 0; u32 crc; u64 bytenr; - int last_barrier = 0; if (max_mirrors == 0) max_mirrors = BTRFS_SUPER_MIRROR_MAX; - /* make sure only the last submit_bh does a barrier */ - if (do_barriers) { - for (i = 0; i < max_mirrors; i++) { - bytenr = btrfs_sb_offset(i); - if (bytenr + BTRFS_SUPER_INFO_SIZE >= - device->total_bytes) - break; - last_barrier = i; - } - } - for (i = 0; i < max_mirrors; i++) { bytenr = btrfs_sb_offset(i); if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes) @@ -2634,17 +2622,136 @@ static int write_dev_supers(struct btrfs_device *device, bh->b_end_io = btrfs_end_buffer_write_sync; } - if (i == last_barrier && do_barriers) - ret = submit_bh(WRITE_FLUSH_FUA, bh); - else - ret = submit_bh(WRITE_SYNC, bh); - + /* + * we fua the first super. The others we allow + * to go down lazy. + */ + ret = submit_bh(WRITE_FUA, bh); if (ret) errors++; } return errors < i ? 0 : -1; } +/* + * endio for the write_dev_flush, this will wake anyone waiting + * for the barrier when it is done + */ +static void btrfs_end_empty_barrier(struct bio *bio, int err) +{ + if (err) { + if (err == -EOPNOTSUPP) + set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); + clear_bit(BIO_UPTODATE, &bio->bi_flags); + } + if (bio->bi_private) + complete(bio->bi_private); + bio_put(bio); +} + +/* + * trigger flushes for one the devices. If you pass wait == 0, the flushes are + * sent down. With wait == 1, it waits for the previous flush. + * + * any device where the flush fails with eopnotsupp are flagged as not-barrier + * capable + */ +static int write_dev_flush(struct btrfs_device *device, int wait) +{ + struct bio *bio; + int ret = 0; + + if (device->nobarriers) + return 0; + + if (wait) { + bio = device->flush_bio; + if (!bio) + return 0; + + wait_for_completion(&device->flush_wait); + + if (bio_flagged(bio, BIO_EOPNOTSUPP)) { + printk("btrfs: disabling barriers on dev %s\n", + device->name); + device->nobarriers = 1; + } + if (!bio_flagged(bio, BIO_UPTODATE)) { + ret = -EIO; + } + + /* drop the reference from the wait == 0 run */ + bio_put(bio); + device->flush_bio = NULL; + + return ret; + } + + /* + * one reference for us, and we leave it for the + * caller + */ + device->flush_bio = NULL;; + bio = bio_alloc(GFP_NOFS, 0); + if (!bio) + return -ENOMEM; + + bio->bi_end_io = btrfs_end_empty_barrier; + bio->bi_bdev = device->bdev; + init_completion(&device->flush_wait); + bio->bi_private = &device->flush_wait; + device->flush_bio = bio; + + bio_get(bio); + submit_bio(WRITE_FLUSH, bio); + + return 0; +} + +/* + * send an empty flush down to each device in parallel, + * then wait for them + */ +static int barrier_all_devices(struct btrfs_fs_info *info) +{ + struct list_head *head; + struct btrfs_device *dev; + int errors = 0; + int ret; + + /* send down all the barriers */ + head = &info->fs_devices->devices; + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 0); + if (ret) + errors++; + } + + /* wait for all the barriers */ + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 1); + if (ret) + errors++; + } + if (errors) + return -EIO; + return 0; +} + int write_all_supers(struct btrfs_root *root, int max_mirrors) { struct list_head *head; @@ -2666,6 +2773,10 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) mutex_lock(&root->fs_info->fs_devices->device_list_mutex); head = &root->fs_info->fs_devices->devices; + + if (do_barriers) + barrier_all_devices(root->fs_info); + list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) { total_errors++; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index ab5b1c49f352..78f2d4d4f37f 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -100,6 +100,12 @@ struct btrfs_device { struct reada_zone *reada_curr_zone; struct radix_tree_root reada_zones; struct radix_tree_root reada_extents; + + /* for sending down flush barriers */ + struct bio *flush_bio; + struct completion flush_wait; + int nobarriers; + }; struct btrfs_fs_devices { From 745c4d8e160afaf6c75e887c27ea4b75c8142b26 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 20 Nov 2011 07:31:57 -0500 Subject: [PATCH 659/692] btrfs: Fix up 32/64-bit compatibility for new ioctls This patch casts to unsigned long before casting to a pointer and fixes the following warnings: fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Jeff Mahoney Signed-off-by: Chris Mason --- fs/btrfs/backref.c | 2 +- fs/btrfs/extent_io.c | 2 +- fs/btrfs/ioctl.c | 9 ++++++--- fs/btrfs/scrub.c | 2 +- 4 files changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 8855aad3929c..22c64fff1bd5 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -683,7 +683,7 @@ static int inode_to_path(u64 inum, struct btrfs_inode_ref *iref, return PTR_ERR(fspath); if (fspath > fspath_min) { - ipath->fspath->val[i] = (u64)fspath; + ipath->fspath->val[i] = (u64)(unsigned long)fspath; ++ipath->fspath->elem_cnt; ipath->fspath->bytes_left = fspath - fspath_min; } else { diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 1f87c4d0e7a0..47fdba7853c3 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2286,7 +2286,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } if (!uptodate) { u64 failed_mirror; - failed_mirror = (u64)bio->bi_bdev; + failed_mirror = (unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 4a34c472f126..bda53fcd1a09 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2930,11 +2930,13 @@ static long btrfs_ioctl_ino_to_path(struct btrfs_root *root, void __user *arg) goto out; for (i = 0; i < ipath->fspath->elem_cnt; ++i) { - rel_ptr = ipath->fspath->val[i] - (u64)ipath->fspath->val; + rel_ptr = ipath->fspath->val[i] - + (u64)(unsigned long)ipath->fspath->val; ipath->fspath->val[i] = rel_ptr; } - ret = copy_to_user((void *)ipa->fspath, (void *)ipath->fspath, size); + ret = copy_to_user((void *)(unsigned long)ipa->fspath, + (void *)(unsigned long)ipath->fspath, size); if (ret) { ret = -EFAULT; goto out; @@ -3017,7 +3019,8 @@ static long btrfs_ioctl_logical_to_ino(struct btrfs_root *root, if (ret < 0) goto out; - ret = copy_to_user((void *)loi->inodes, (void *)inodes, size); + ret = copy_to_user((void *)(unsigned long)loi->inodes, + (void *)(unsigned long)inodes, size); if (ret) ret = -EFAULT; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index f4190f22edfb..fab420db5121 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -272,7 +272,7 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx) swarn->logical, swarn->dev->name, (unsigned long long)swarn->sector, root, inum, offset, min(isize - offset, (u64)PAGE_SIZE), nlink, - (char *)ipath->fspath->val[i]); + (char *)(unsigned long)ipath->fspath->val[i]); free_ipath(ipath); return 0; From 32240a913d9f3a5aad42175d7696590ea1bfdb08 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: [PATCH 660/692] btrfs: mirror_num should be int, not u64 My previous patch introduced some u64 for failed_mirror variables, this one makes it consistent again. Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent_io.c | 4 ++-- fs/btrfs/extent_io.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 48d30138237f..94abc25392f6 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -620,7 +620,7 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, static int btree_io_failed_hook(struct bio *failed_bio, struct page *page, u64 start, u64 end, - u64 mirror_num, struct extent_state *state) + int mirror_num, struct extent_state *state) { struct extent_io_tree *tree; unsigned long len; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 47fdba7853c3..a877b8b212eb 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2285,8 +2285,8 @@ static void end_bio_extent_readpage(struct bio *bio, int err) clean_io_failure(start, page); } if (!uptodate) { - u64 failed_mirror; - failed_mirror = (unsigned long)bio->bi_bdev; + int failed_mirror; + failed_mirror = (int)(unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index feb9be0e23bc..7604c3001322 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -70,7 +70,7 @@ struct extent_io_ops { unsigned long bio_flags); int (*readpage_io_hook)(struct page *page, u64 start, u64 end); int (*readpage_io_failed_hook)(struct bio *bio, struct page *page, - u64 start, u64 end, u64 failed_mirror, + u64 start, u64 end, int failed_mirror, struct extent_state *state); int (*writepage_io_failed_hook)(struct bio *bio, struct page *page, u64 start, u64 end, From 0f0fbf1d0e188d129756e9508090af4bdbfde00b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: [PATCH 661/692] Btrfs: fix to search one more bitmap for cluster setup Suppose there are two bitmaps [0, 256], [256, 512] and one extent [100, 120] in the free space cache, and we want to setup a cluster with offset=100, bytes=50. In this case, there will be only one bitmap [256, 512] in the temporary bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256]. The cause is, the list is constructed in setup_cluster_no_bitmap(), and only bitmaps with bitmap_entry->offset >= offset will be added into the list, and the very bitmap that convers offset has bitmap_entry->offset <= offset. Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 181760f9d2ab..8f792f41feab 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2453,10 +2453,22 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *entry; struct rb_node *node; int ret = -ENOSPC; + u64 bitmap_offset = offset_to_bitmap(ctl, offset); if (ctl->total_bitmaps == 0) return -ENOSPC; + /* + * The bitmap that covers offset won't be in the list unless offset + * is just its start offset. + */ + entry = list_first_entry(bitmaps, struct btrfs_free_space, list); + if (entry->offset != bitmap_offset) { + entry = tree_search_offset(ctl, bitmap_offset, 1, 0); + if (entry && list_empty(&entry->list)) + list_add(&entry->list, bitmaps); + } + /* * First check our cached list of bitmaps and see if there is an entry * here that will work. From 52621cb6ed0e0e14358bb317bda7cd5fbd5c2a27 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: [PATCH 662/692] Btrfs: avoid unnecessary bitmap search for cluster setup setup_cluster_no_bitmap() searches all the extents and bitmaps starting from offset. Therefore if it returns -ENOSPC, all the bitmaps starting from offset are in the bitmaps list, so it's sufficient to search from this list in setup_cluser_bitmap(). Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 42 ++++--------------------------------- 1 file changed, 4 insertions(+), 38 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8f792f41feab..8c32434da2cb 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2451,7 +2451,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry; - struct rb_node *node; int ret = -ENOSPC; u64 bitmap_offset = offset_to_bitmap(ctl, offset); @@ -2469,10 +2468,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, list_add(&entry->list, bitmaps); } - /* - * First check our cached list of bitmaps and see if there is an entry - * here that will work. - */ list_for_each_entry(entry, bitmaps, list) { if (entry->bytes < min_bytes) continue; @@ -2483,38 +2478,10 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, } /* - * If we do have entries on our list and we are here then we didn't find - * anything, so go ahead and get the next entry after the last entry in - * this list and start the search from there. + * The bitmaps list has all the bitmaps that record free space + * starting after offset, so no more search is required. */ - if (!list_empty(bitmaps)) { - entry = list_entry(bitmaps->prev, struct btrfs_free_space, - list); - node = rb_next(&entry->offset_index); - if (!node) - return -ENOSPC; - entry = rb_entry(node, struct btrfs_free_space, offset_index); - goto search; - } - - entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1); - if (!entry) - return -ENOSPC; - -search: - node = &entry->offset_index; - do { - entry = rb_entry(node, struct btrfs_free_space, offset_index); - node = rb_next(&entry->offset_index); - if (!entry->bitmap) - continue; - if (entry->bytes < min_bytes) - continue; - ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset, - bytes, min_bytes); - } while (ret && node); - - return ret; + return -ENOSPC; } /* @@ -2532,8 +2499,8 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, u64 offset, u64 bytes, u64 empty_size) { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; - struct list_head bitmaps; struct btrfs_free_space *entry, *tmp; + LIST_HEAD(bitmaps); u64 min_bytes; int ret; @@ -2572,7 +2539,6 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, goto out; } - INIT_LIST_HEAD(&bitmaps); ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset, bytes, min_bytes); if (ret) From fadc0d8be4dfca80f6c568bc5874931893c6709b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: [PATCH 663/692] btrfs: fix stat blocks accounting Round inode bytes and delalloc bytes up to real blocksize before converting to sector size. Otherwise eg. files smaller than 512 are reported with zero blocks due to incorrect rounding. Signed-off-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e16215f480d0..8ad26b135a1c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6794,11 +6794,13 @@ static int btrfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct inode *inode = dentry->d_inode; + u32 blocksize = inode->i_sb->s_blocksize; + generic_fillattr(inode, stat); stat->dev = BTRFS_I(inode)->root->anon_dev; stat->blksize = PAGE_CACHE_SIZE; - stat->blocks = (inode_get_bytes(inode) + - BTRFS_I(inode)->delalloc_bytes) >> 9; + stat->blocks = (ALIGN(inode_get_bytes(inode), blocksize) + + ALIGN(BTRFS_I(inode)->delalloc_bytes, blocksize)) >> 9; return 0; } From 5bb1468238e20b15921909e9f9601e945f03bac7 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: [PATCH 664/692] Btrfs: prefix resize related printks with btrfs: For the user it is confusing to find something like: [10197.627710] new size for /dev/mapper/vg0-usr_share is 3221225472 in kernel log, because it doesn't point directly to btrfs. This patch prefixes those messages with "btrfs:" like other btrfs related printks. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index bda53fcd1a09..a90e749ed6d2 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1216,12 +1216,12 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, *devstr = '\0'; devstr = vol_args->name; devid = simple_strtoull(devstr, &end, 10); - printk(KERN_INFO "resizing devid %llu\n", + printk(KERN_INFO "btrfs: resizing devid %llu\n", (unsigned long long)devid); } device = btrfs_find_device(root, devid, NULL, NULL); if (!device) { - printk(KERN_INFO "resizer unable to find device %llu\n", + printk(KERN_INFO "btrfs: resizer unable to find device %llu\n", (unsigned long long)devid); ret = -EINVAL; goto out_unlock; @@ -1267,7 +1267,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, do_div(new_size, root->sectorsize); new_size *= root->sectorsize; - printk(KERN_INFO "new size for %s is %llu\n", + printk(KERN_INFO "btrfs: new size for %s is %llu\n", device->name, (unsigned long long)new_size); if (new_size > old_size) { From 291c7d2f577428f896daa5002e784959328a80aa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 14 Nov 2011 13:52:14 -0500 Subject: [PATCH 665/692] Btrfs: wait on caching if we're loading the free space cache We've been hitting panics when running xfstest 13 in a loop for long periods of time. And actually this problem has always existed so we've been hitting these things randomly for a while. Basically what happens is we get a thread coming into the allocator and reading the space cache off of disk and adding the entries to the free space cache as we go. Then we get another thread that comes in and tries to allocate from that block group. Since block_group->cached != BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because if we're doing the old slow way of caching we don't want to hold people up and wait for everything to finish. The problem with this is we could end up discarding the space cache at some arbitrary point in the future, which means we could very well end up allocating space that is either bad, or when the real caching happens it could end up thinking the space isn't in use when it really is and cause all sorts of other problems. The solution is to add a new flag to indicate we are loading the free space cache from disk, and always try to cache the block group if cache->cached != BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else who tries to allocate from the block group will have to wait until it's finished to make sure it completes successfully. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 3 +- fs/btrfs/extent-tree.c | 121 +++++++++++++++++++++++++++-------------- 2 files changed, 82 insertions(+), 42 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b1cb3c052484..04a5dfcee5a1 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -848,7 +848,8 @@ struct btrfs_free_cluster { enum btrfs_caching_type { BTRFS_CACHE_NO = 0, BTRFS_CACHE_STARTED = 1, - BTRFS_CACHE_FINISHED = 2, + BTRFS_CACHE_FAST = 2, + BTRFS_CACHE_FINISHED = 3, }; enum btrfs_disk_cache_state { diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0f47b3e2010e..5d86877f10e1 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -467,13 +467,59 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, struct btrfs_root *root, int load_cache_only) { + DEFINE_WAIT(wait); struct btrfs_fs_info *fs_info = cache->fs_info; struct btrfs_caching_control *caching_ctl; int ret = 0; - smp_mb(); - if (cache->cached != BTRFS_CACHE_NO) + caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); + BUG_ON(!caching_ctl); + + INIT_LIST_HEAD(&caching_ctl->list); + mutex_init(&caching_ctl->mutex); + init_waitqueue_head(&caching_ctl->wait); + caching_ctl->block_group = cache; + caching_ctl->progress = cache->key.objectid; + atomic_set(&caching_ctl->count, 1); + caching_ctl->work.func = caching_thread; + + spin_lock(&cache->lock); + /* + * This should be a rare occasion, but this could happen I think in the + * case where one thread starts to load the space cache info, and then + * some other thread starts a transaction commit which tries to do an + * allocation while the other thread is still loading the space cache + * info. The previous loop should have kept us from choosing this block + * group, but if we've moved to the state where we will wait on caching + * block groups we need to first check if we're doing a fast load here, + * so we can wait for it to finish, otherwise we could end up allocating + * from a block group who's cache gets evicted for one reason or + * another. + */ + while (cache->cached == BTRFS_CACHE_FAST) { + struct btrfs_caching_control *ctl; + + ctl = cache->caching_ctl; + atomic_inc(&ctl->count); + prepare_to_wait(&ctl->wait, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock(&cache->lock); + + schedule(); + + finish_wait(&ctl->wait, &wait); + put_caching_control(ctl); + spin_lock(&cache->lock); + } + + if (cache->cached != BTRFS_CACHE_NO) { + spin_unlock(&cache->lock); + kfree(caching_ctl); return 0; + } + WARN_ON(cache->caching_ctl); + cache->caching_ctl = caching_ctl; + cache->cached = BTRFS_CACHE_FAST; + spin_unlock(&cache->lock); /* * We can't do the read from on-disk cache during a commit since we need @@ -484,56 +530,51 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, if (trans && (!trans->transaction->in_commit) && (root && root != root->fs_info->tree_root) && btrfs_test_opt(root, SPACE_CACHE)) { - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { - spin_unlock(&cache->lock); - return 0; - } - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); - ret = load_free_space_cache(fs_info, cache); spin_lock(&cache->lock); if (ret == 1) { + cache->caching_ctl = NULL; cache->cached = BTRFS_CACHE_FINISHED; cache->last_byte_to_unpin = (u64)-1; } else { - cache->cached = BTRFS_CACHE_NO; + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } } spin_unlock(&cache->lock); + wake_up(&caching_ctl->wait); if (ret == 1) { + put_caching_control(caching_ctl); free_excluded_extents(fs_info->extent_root, cache); return 0; } - } - - if (load_cache_only) - return 0; - - caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); - BUG_ON(!caching_ctl); - - INIT_LIST_HEAD(&caching_ctl->list); - mutex_init(&caching_ctl->mutex); - init_waitqueue_head(&caching_ctl->wait); - caching_ctl->block_group = cache; - caching_ctl->progress = cache->key.objectid; - /* one for caching kthread, one for caching block group list */ - atomic_set(&caching_ctl->count, 2); - caching_ctl->work.func = caching_thread; - - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { + } else { + /* + * We are not going to do the fast caching, set cached to the + * appropriate value and wakeup any waiters. + */ + spin_lock(&cache->lock); + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } spin_unlock(&cache->lock); - kfree(caching_ctl); + wake_up(&caching_ctl->wait); + } + + if (load_cache_only) { + put_caching_control(caching_ctl); return 0; } - cache->caching_ctl = caching_ctl; - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); down_write(&fs_info->extent_commit_sem); + atomic_inc(&caching_ctl->count); list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups); up_write(&fs_info->extent_commit_sem); @@ -5177,13 +5218,15 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, } have_block_group: - if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) { u64 free_percent; + found_uncached_bg = true; ret = cache_block_group(block_group, trans, orig_root, 1); if (block_group->cached == BTRFS_CACHE_FINISHED) - goto have_block_group; + goto alloc; free_percent = btrfs_block_group_used(&block_group->item); free_percent *= 100; @@ -5205,7 +5248,6 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, orig_root, 0); BUG_ON(ret); } - found_uncached_bg = true; /* * If loop is set for cached only, try the next block @@ -5215,10 +5257,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, goto loop; } - cached = block_group_cache_done(block_group); - if (unlikely(!cached)) - found_uncached_bg = true; - +alloc: if (unlikely(block_group->ro)) goto loop; From f7d61dcd6873c49bcc42be2caa2af1c2511aa915 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 15 Nov 2011 09:31:24 -0500 Subject: [PATCH 666/692] Btrfs: clear pages dirty for io and set them extent mapped When doing the io_ctl helpers to clean up the free space cache stuff I stopped using our normal prepare_pages stuff, which means I of course forgot to do things like set the pages extent mapped, which will cause us all sorts of wonderful propblems. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/free-space-cache.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8c32434da2cb..aedacdbf77e2 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -351,6 +351,11 @@ static int io_ctl_prepare_pages(struct io_ctl *io_ctl, struct inode *inode, } } + for (i = 0; i < io_ctl->num_pages; i++) { + clear_page_dirty_for_io(io_ctl->pages[i]); + set_page_extent_mapped(io_ctl->pages[i]); + } + return 0; } From 4d479cf010d56ec9c54f3099992d039918f1296b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 17 Nov 2011 11:34:31 -0500 Subject: [PATCH 667/692] Btrfs: sectorsize align offsets in fiemap We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere else that calls btrfs_get_extent while running xfstests 13 in a loop. This is because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets, which will end up adding mappings that are not sectorsize aligned, which will cause problems in some cases for subsequent calls to btrfs_get_extent for similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't hit the problem that I could previously hit in at most 20 minutes. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent_io.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index a877b8b212eb..9472d3de5e52 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3366,6 +3366,9 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, return -ENOMEM; path->leave_spinning = 1; + start = ALIGN(start, BTRFS_I(inode)->root->sectorsize); + len = ALIGN(len, BTRFS_I(inode)->root->sectorsize); + /* * lookup the last file extent. We're not using i_size here * because there might be preallocation past i_size @@ -3413,7 +3416,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, &cached_state, GFP_NOFS); - em = get_extent_skip_holes(inode, off, last_for_get_extent, + em = get_extent_skip_holes(inode, start, last_for_get_extent, get_extent); if (!em) goto out; From dd179946db2493646955efc112d73c85b3cafcb1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Aug 2011 15:31:30 +0100 Subject: [PATCH 668/692] VFS: Log the fact that we've given ELOOP rather than creating a loop To prevent an NFS server from being used to create a directory loop in an NFS superblock on the client, the following patch was committed: commit 1836750115f20b774e55c032a3893e8c5bdf41ed Author: Al Viro Date: Tue Jul 12 21:42:24 2011 -0400 Subject: fix loop checks in d_materialise_unique() This causes ELOOP to be reported to anyone trying to access the dentry that would otherwise cause the kernel to complete the loop. However, no indication is given to the caller as to why an operation that ought to work doesn't. The fault is with the kernel, which doesn't want to try and solve the problem as it gets horrendously messy if there's another mountpoint somewhere in the trees being spliced that can't be moved[*]. [*] The real problem is that we don't handle the excision of a subtree that gets moved _out_ of what we can see. This can happen on the server where a directory is merely moved between two other dirs on the same filesystem, but where destination dir is not accessible by the client. So, given the choice to return ELOOP rather than trying to reconfigure the dentry tree, we should give the caller some indication of why they aren't being allowed to make what should be a legitimate request and log a message. Signed-off-by: David Howells Acked-by: Sachin Prabhu Signed-off-by: Al Viro --- fs/dcache.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/dcache.c b/fs/dcache.c index a901c6901bce..10ba92def3f6 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "internal.h" /* @@ -2383,8 +2384,16 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode) actual = __d_unalias(inode, dentry, alias); } write_sequnlock(&rename_lock); - if (IS_ERR(actual)) + if (IS_ERR(actual)) { + if (PTR_ERR(actual) == -ELOOP) + pr_warn_ratelimited( + "VFS: Lookup of '%s' in %s %s" + " would have caused loop\n", + dentry->d_name.name, + inode->i_sb->s_type->name, + inode->i_sb->s_id); dput(alias); + } goto out_nolock; } } From 6e58ad69efe9f4c91eb15f6bc365293414c397ce Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Mon, 21 Nov 2011 12:09:19 -0500 Subject: [PATCH 669/692] ext4: fix up a undefined error in ext4_free_blocks in debugging code sbi is not defined, so let ext4_free_blocks use EXT4_SB(sb) instead when EXT4FS_DEBUG is defined. Signed-off-by: Yongqiang Yang --- fs/ext4/balloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index f6dba4505f1c..12ccacda44e0 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -565,7 +565,7 @@ ext4_fsblk_t ext4_count_free_clusters(struct super_block *sb) brelse(bitmap_bh); printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu" ", computed = %llu, %llu\n", - EXT4_B2C(sbi, ext4_free_blocks_count(es)), + EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)), desc_count, bitmap_count); return bitmap_count; #else From 24a70313969fc3fc440216b40babdb42564acff3 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 21 Nov 2011 09:39:11 -0500 Subject: [PATCH 670/692] Btrfs: remove free-space-cache.c WARN during log replay The log replay code only partially loads block groups, since the block group caching code is able to detect and deal with extents the logging code has pinned down. While the logging code is pinning down block groups, there is a bogus WARN_ON we're hitting if the code wasn't able to find an extent in the cache. This commit removes the warning because it can happen any time there isn't a valid free space cache for that block group. Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index aedacdbf77e2..6e5b7e463698 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1849,7 +1849,13 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { - WARN_ON(1); + /* the tree logging code might be calling us before we + * have fully loaded the free space rbtree for this + * block group. So it is possible the entry won't + * be in the rbtree yet at all. The caching code + * will make sure not to put it in the rbtree if + * the logging code has pinned it. + */ goto out_lock; } } From cc11f9edd919002d8b3a03601a181a449150defd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 03:52:18 +0000 Subject: [PATCH 671/692] fix braino in um patchset (mea culpa) wrong register returned... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/um/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h index 118c143a9cb4..2c32df6fe231 100644 --- a/arch/x86/um/asm/processor.h +++ b/arch/x86/um/asm/processor.h @@ -11,7 +11,7 @@ #endif #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP) -#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP) +#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP) #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP) #define ARCH_IS_STACKGROW(address) \ From c332c10c01d8d31f2eba9abc04b0fc3d62610ed8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 16:48:28 -0500 Subject: [PATCH 672/692] microblaze: bury asm/namei.h altroot support has been gone for years, along with arch/*/asm/namei.h; looks like a dummy survivor that sat it out in microblaze tree... Signed-off-by: Al Viro --- arch/microblaze/include/asm/namei.h | 22 ---------------------- 1 file changed, 22 deletions(-) delete mode 100644 arch/microblaze/include/asm/namei.h diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h deleted file mode 100644 index 61d60b8a07d5..000000000000 --- a/arch/microblaze/include/asm/namei.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_NAMEI_H -#define _ASM_MICROBLAZE_NAMEI_H - -#ifdef __KERNEL__ - -/* This dummy routine maybe changed to something useful - * for /usr/gnemul/ emulation stuff. - * Look at asm-sparc/namei.h for details. - */ -#define __emul_prefix() NULL - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_NAMEI_H */ From b46413367961c2e8bd827e067a231be982aaeee2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 17:25:37 -0500 Subject: [PATCH 673/692] iio: fix a leak due to improper use of anon_inode_getfd() it can fail and in that case ->release() will *not* be called... Signed-off-by: Al Viro --- drivers/staging/iio/industrialio-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 326e967d54ef..26564094e33b 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -242,6 +242,8 @@ static const struct file_operations iio_event_chrdev_fileops = { static int iio_event_getfd(struct iio_dev *indio_dev) { + int fd; + if (indio_dev->event_interface == NULL) return -ENODEV; @@ -252,9 +254,15 @@ static int iio_event_getfd(struct iio_dev *indio_dev) return -EBUSY; } mutex_unlock(&indio_dev->event_interface->event_list_lock); - return anon_inode_getfd("iio:event", + fd = anon_inode_getfd("iio:event", &iio_event_chrdev_fileops, indio_dev->event_interface, O_RDONLY); + if (fd < 0) { + mutex_lock(&indio_dev->event_interface->event_list_lock); + clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags); + mutex_unlock(&indio_dev->event_interface->event_list_lock); + } + return fd; } static int __init iio_init(void) From d31da0f0ba3bc0a827a63879310818c22d9a95be Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 22 Nov 2011 12:31:21 -0500 Subject: [PATCH 674/692] mount_subtree() pointless use-after-free d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been overwritten by now... Signed-off-by: Al Viro --- fs/namespace.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 50ee30345b4f..6d3a1963879b 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2493,6 +2493,7 @@ EXPORT_SYMBOL(create_mnt_ns); struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) { struct mnt_namespace *ns; + struct super_block *s; struct path path; int err; @@ -2509,10 +2510,11 @@ struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) return ERR_PTR(err); /* trade a vfsmount reference for active sb one */ - atomic_inc(&path.mnt->mnt_sb->s_active); + s = path.mnt->mnt_sb; + atomic_inc(&s->s_active); mntput(path.mnt); /* lock the sucker */ - down_write(&path.mnt->mnt_sb->s_umount); + down_write(&s->s_umount); /* ... and return the root of (sub)tree on it */ return path.dentry; } From 26cc40a83384178bfaefbcfb4786591498f3e190 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 21 Nov 2011 13:05:02 +0100 Subject: [PATCH 675/692] ttm: Don't return the bo reserved on error path An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 617b64678fc6..0bb0f5f713e6 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -574,10 +574,16 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, return ret; spin_lock(&glob->lru_lock); + + if (unlikely(list_empty(&bo->ddestroy))) { + spin_unlock(&glob->lru_lock); + return 0; + } + ret = ttm_bo_reserve_locked(bo, interruptible, no_wait_reserve, false, 0); - if (unlikely(ret != 0) || list_empty(&bo->ddestroy)) { + if (unlikely(ret != 0)) { spin_unlock(&glob->lru_lock); return ret; } From d724502a9d7a46f4a56a1663b1f50d2dc9d1ef40 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:10:14 -0500 Subject: [PATCH 676/692] drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index fecd705a1a5f..933a2cd7bb55 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -181,6 +181,18 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) gpio = &i2c_info->asGPIO_Info[i]; i2c.valid = false; + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + /* some evergreen boards have bad data for this entry */ if (ASIC_IS_DCE4(rdev)) { if ((i == 7) && From 21240f9bc1b0ac925cd18b74618327a110022332 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:41:21 -0500 Subject: [PATCH 677/692] drm/radeon/kms/atom: unify i2c gpio table handling Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher Cc: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 214 +++++++++-------------- 1 file changed, 86 insertions(+), 128 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 933a2cd7bb55..d24baf30efcb 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -62,6 +62,87 @@ union atom_supported_devices { struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1; }; +static void radeon_lookup_i2c_gpio_quirks(struct radeon_device *rdev, + ATOM_GPIO_I2C_ASSIGMENT *gpio, + u8 index) +{ + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + + /* some evergreen boards have bad data for this entry */ + if (ASIC_IS_DCE4(rdev)) { + if ((index == 7) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && + (gpio->sucI2cId.ucAccess == 0)) { + gpio->sucI2cId.ucAccess = 0x97; + gpio->ucDataMaskShift = 8; + gpio->ucDataEnShift = 8; + gpio->ucDataY_Shift = 8; + gpio->ucDataA_Shift = 8; + } + } + + /* some DCE3 boards have bad data for this entry */ + if (ASIC_IS_DCE3(rdev)) { + if ((index == 4) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && + (gpio->sucI2cId.ucAccess == 0x94)) + gpio->sucI2cId.ucAccess = 0x14; + } +} + +static struct radeon_i2c_bus_rec radeon_get_bus_rec_for_i2c_gpio(ATOM_GPIO_I2C_ASSIGMENT *gpio) +{ + struct radeon_i2c_bus_rec i2c; + + memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); + + i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; + i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; + i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; + i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; + i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; + i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; + i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; + i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; + i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); + i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); + i2c.en_clk_mask = (1 << gpio->ucClkEnShift); + i2c.en_data_mask = (1 << gpio->ucDataEnShift); + i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); + i2c.y_data_mask = (1 << gpio->ucDataY_Shift); + i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); + i2c.a_data_mask = (1 << gpio->ucDataA_Shift); + + if (gpio->sucI2cId.sbfAccess.bfHW_Capable) + i2c.hw_capable = true; + else + i2c.hw_capable = false; + + if (gpio->sucI2cId.ucAccess == 0xa0) + i2c.mm_i2c = true; + else + i2c.mm_i2c = false; + + i2c.i2c_id = gpio->sucI2cId.ucAccess; + + if (i2c.mask_clk_reg) + i2c.valid = true; + else + i2c.valid = false; + + return i2c; +} + static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev, uint8_t id) { @@ -85,71 +166,10 @@ static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rd for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } - - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } - - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); if (gpio->sucI2cId.ucAccess == id) { - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; - - i2c.i2c_id = gpio->sucI2cId.ucAccess; - - if (i2c.mask_clk_reg) - i2c.valid = true; + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); break; } } @@ -169,8 +189,6 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) int i, num_indices; char stmp[32]; - memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); - if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) { i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset); @@ -179,72 +197,12 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - i2c.valid = false; - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } - - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; - - i2c.i2c_id = gpio->sucI2cId.ucAccess; - - if (i2c.mask_clk_reg) { - i2c.valid = true; + if (i2c.valid) { sprintf(stmp, "0x%x", i2c.i2c_id); rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp); } From c916874d60d9daf2e2d5f4f622b185ef57deb6a4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 15 Nov 2011 14:53:11 -0800 Subject: [PATCH 678/692] drivers/gpu/vga/vgaarb.c: add missing kfree kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall Cc: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/vga/vgaarb.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index bdde899af72e..111d956d8e7d 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -991,14 +991,20 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, uc = &priv->cards[i]; } - if (!uc) - return -EINVAL; + if (!uc) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) { + ret_val = -EINVAL; + goto done; + } vga_put(pdev, io_state); From b4bbb02934e4511d9083f15c23e90703482e84ad Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 22 Nov 2011 15:09:20 -0800 Subject: [PATCH 679/692] Revert "of/irq: of_irq_find_parent: check for parent equal to child" This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt Acked-by: Grant Likely Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev Cc: Tanmay Inamdar Signed-off-by: Linus Torvalds --- drivers/of/irq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 6d3dd3988d0f..791270b8bd1c 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -60,27 +60,27 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); */ struct device_node *of_irq_find_parent(struct device_node *child) { - struct device_node *p, *c = child; + struct device_node *p; const __be32 *parp; - if (!of_node_get(c)) + if (!of_node_get(child)) return NULL; do { - parp = of_get_property(c, "interrupt-parent", NULL); + parp = of_get_property(child, "interrupt-parent", NULL); if (parp == NULL) - p = of_get_parent(c); + p = of_get_parent(child); else { if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) p = of_node_get(of_irq_dflt_pic); else p = of_find_node_by_phandle(be32_to_cpup(parp)); } - of_node_put(c); - c = p; + of_node_put(child); + child = p; } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); - return (p == child) ? NULL : p; + return p; } /** From a5cd335165e31db9dbab636fd29895d41da55dd2 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Wed, 23 Nov 2011 01:12:01 -0500 Subject: [PATCH 680/692] drm: integer overflow in drm_mode_dirtyfb_ioctl() There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen Signed-off-by: Xi Wang Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 4 ++++ include/drm/drm_mode.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 405c63b9d539..8323fc389840 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1873,6 +1873,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, } if (num_clips && clips_ptr) { + if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) { + ret = -EINVAL; + goto out_err1; + } clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); if (!clips) { ret = -ENOMEM; diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index d30bedfeb7ef..ddd46db65b57 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -235,6 +235,8 @@ struct drm_mode_fb_cmd { #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02 #define DRM_MODE_FB_DIRTY_FLAGS 0x03 +#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256 + /* * Mark a region of a framebuffer as dirty. * From cc6bcf7d2ec2234e7b41770185e4dc826390185e Mon Sep 17 00:00:00 2001 From: "Jeffrey (Sheng-Hui) Chu" Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: [PATCH 681/692] i2c-algo-bit: Generate correct i2c address sequence for 10-bit target The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu Cc: stable@kernel.org Signed-off-by: Jean Delvare --- drivers/i2c/algos/i2c-algo-bit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 85584a547c25..525c7345fa0b 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -488,7 +488,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if (flags & I2C_M_TEN) { /* a ten bit address */ - addr = 0xf0 | ((msg->addr >> 7) & 0x03); + addr = 0xf0 | ((msg->addr >> 7) & 0x06); bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr); /* try extended address code...*/ ret = try_address(i2c_adap, addr, retries); @@ -498,7 +498,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return -ENXIO; } /* the remaining 8 bit address */ - ret = i2c_outb(i2c_adap, msg->addr & 0x7f); + ret = i2c_outb(i2c_adap, msg->addr & 0xff); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ dev_err(&i2c_adap->dev, "died at 2nd address code\n"); From cbb44514048a250647c6c6b3df27ff62cb71f7d5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: [PATCH 682/692] i2c: Fix device name for 10-bit slave address 10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang --- Documentation/i2c/ten-bit-addresses | 36 +++++++++++++++-------------- drivers/i2c/i2c-core.c | 4 +++- 2 files changed, 22 insertions(+), 18 deletions(-) diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses index e9890709c508..cdfe13901b99 100644 --- a/Documentation/i2c/ten-bit-addresses +++ b/Documentation/i2c/ten-bit-addresses @@ -1,22 +1,24 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit addresses, and an extended set of 10 bit addresses. The sets of addresses do not intersect: the 7 bit address 0x10 is not the same as the 10 bit -address 0x10 (though a single device could respond to both of them). You -select a 10 bit address by adding an extra byte after the address -byte: - S Addr7 Rd/Wr .... -becomes - S 11110 Addr10 Rd/Wr -S is the start bit, Rd/Wr the read/write bit, and if you count the number -of bits, you will see the there are 8 after the S bit for 7 bit addresses, -and 16 after the S bit for 10 bit addresses. +address 0x10 (though a single device could respond to both of them). -WARNING! The current 10 bit address support is EXPERIMENTAL. There are -several places in the code that will cause SEVERE PROBLEMS with 10 bit -addresses, even though there is some basic handling and hooks. Also, -almost no supported adapter handles the 10 bit addresses correctly. +I2C messages to and from 10-bit address devices have a different format. +See the I2C specification for the details. -As soon as a real 10 bit address device is spotted 'in the wild', we -can and will add proper support. Right now, 10 bit address devices -are defined by the I2C protocol, but we have never seen a single device -which supports them. +The current 10 bit address support is minimal. It should work, however +you can expect some problems along the way: +* Not all bus drivers support 10-bit addresses. Some don't because the + hardware doesn't support them (SMBus doesn't require 10-bit address + support for example), some don't because nobody bothered adding the + code (or it's there but not working properly.) Software implementation + (i2c-algo-bit) is known to work. +* Some optional features do not support 10-bit addresses. This is the + case of automatic detection and instantiation of devices by their, + drivers, for example. +* Many user-space packages (for example i2c-tools) lack support for + 10-bit addresses. + +Note that 10-bit address devices are still pretty rare, so the limitations +listed above could stay for a long time, maybe even forever if nobody +needs them to be fixed. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 131079a3e292..1e5606185b4f 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -539,8 +539,10 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.type = &i2c_client_type; client->dev.of_node = info->of_node; + /* For 10-bit clients, add an arbitrary offset to avoid collisions */ dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), - client->addr); + client->addr | ((client->flags & I2C_CLIENT_TEN) + ? 0xa000 : 0)); status = device_register(&client->dev); if (status) goto out_err; From 67820021dc9c8da37f773025190280f55f3626d4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: [PATCH 683/692] i2c: Delete ANY_I2C_BUS Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago, so ANY_I2C_BUS can go away as well. Signed-off-by: Jean Delvare --- include/linux/i2c.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a81bf6d23b3e..07d103a06d64 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *); /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -/* The numbers to use to set I2C bus address */ -#define ANY_I2C_BUS 0xffff - /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ #define I2C_ADDRS(addr, addrs...) \ ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) From eff245c82f115059648cdce95dd68bb940f2b006 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: [PATCH 684/692] i2c: Make i2cdev_notifier_call static The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index c90ce50b619f..57a45ce84b2d 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -579,7 +579,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy) return 0; } -int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, +static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; From 780dc9ba4eb682a89be48d5b814feae6722a19e0 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 8 Nov 2011 18:54:10 +0530 Subject: [PATCH 685/692] regulator: TPS65910: Fix VDD1/2 voltage selector count Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed Signed-off-by: Mark Brown --- drivers/regulator/tps65910-regulator.c | 14 ++++++++------ include/linux/mfd/tps65910.h | 3 ++- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 66d2d60b436a..b552aae55b41 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -664,10 +664,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD1, (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), @@ -675,10 +675,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); break; case TPS65910_REG_VDD2: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD2, (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), @@ -756,9 +756,9 @@ static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: case TPS65910_REG_VDD2: - mult = (selector / VDD1_2_NUM_VOLTS) + 1; + mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; volt = VDD1_2_MIN_VOLT + - (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + (selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET; break; case TPS65911_REG_VDDCTRL: volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET); @@ -947,6 +947,8 @@ static __devinit int tps65910_probe(struct platform_device *pdev) if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) { pmic->desc[i].ops = &tps65910_ops_dcdc; + pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE * + VDD1_2_NUM_VOLT_COARSE; } else if (i == TPS65910_REG_VDD3) { if (tps65910_chip_id(tps65910) == TPS65910) pmic->desc[i].ops = &tps65910_ops_vdd3; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 82b4c8801a4f..8bf2cb9502dd 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -243,7 +243,8 @@ /*Registers VDD1, VDD2 voltage values definitions */ -#define VDD1_2_NUM_VOLTS 73 +#define VDD1_2_NUM_VOLT_FINE 73 +#define VDD1_2_NUM_VOLT_COARSE 3 #define VDD1_2_MIN_VOLT 6000 #define VDD1_2_OFFSET 125 From b59db43ad4434519feb338eacb01d77eb50825c5 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:02 -0600 Subject: [PATCH 686/692] eCryptfs: Prevent file create race condition The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146 Signed-off-by: Tyler Hicks Cc: stable@kernel.org --- fs/ecryptfs/crypto.c | 22 ++++++++------- fs/ecryptfs/ecryptfs_kernel.h | 5 ++-- fs/ecryptfs/inode.c | 52 +++++++++++++++++++++-------------- 3 files changed, 46 insertions(+), 33 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 58609bde3b9f..203a1fdff666 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -967,7 +967,7 @@ static void ecryptfs_set_default_crypt_stat_vals( /** * ecryptfs_new_file_context - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_inode: The eCryptfs inode * * If the crypto context for the file has not yet been established, * this is where we do that. Establishing a new crypto context @@ -984,13 +984,13 @@ static void ecryptfs_set_default_crypt_stat_vals( * * Returns zero on success; non-zero otherwise */ -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry) +int ecryptfs_new_file_context(struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; struct ecryptfs_mount_crypt_stat *mount_crypt_stat = &ecryptfs_superblock_to_private( - ecryptfs_dentry->d_sb)->mount_crypt_stat; + ecryptfs_inode->i_sb)->mount_crypt_stat; int cipher_name_len; int rc = 0; @@ -1299,12 +1299,12 @@ static int ecryptfs_write_headers_virt(char *page_virt, size_t max, } static int -ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry, +ecryptfs_write_metadata_to_contents(struct inode *ecryptfs_inode, char *virt, size_t virt_len) { int rc; - rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt, + rc = ecryptfs_write_lower(ecryptfs_inode, virt, 0, virt_len); if (rc < 0) printk(KERN_ERR "%s: Error attempting to write header " @@ -1338,7 +1338,8 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, /** * ecryptfs_write_metadata - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_dentry: The eCryptfs dentry, which should be negative + * @ecryptfs_inode: The newly created eCryptfs inode * * Write the file headers out. This will likely involve a userspace * callout, in which the session key is encrypted with one or more @@ -1348,10 +1349,11 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, * * Returns zero on success; non-zero on error */ -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; unsigned int order; char *virt; size_t virt_len; @@ -1391,7 +1393,7 @@ int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt, size); else - rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt, + rc = ecryptfs_write_metadata_to_contents(ecryptfs_inode, virt, virt_len); if (rc) { printk(KERN_ERR "%s: Error writing metadata out to lower file; " diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 54481a3b2c79..a9f29b12fbf2 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -584,9 +584,10 @@ int ecryptfs_init_crypt_ctx(struct ecryptfs_crypt_stat *crypt_stat); int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode); int ecryptfs_encrypt_page(struct page *page); int ecryptfs_decrypt_page(struct page *page); -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry); +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode); int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry); -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry); +int ecryptfs_new_file_context(struct inode *ecryptfs_inode); void ecryptfs_write_crypt_stat_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat, size_t *written); diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index a36d327f1521..32f90a3ae63e 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -172,22 +172,23 @@ ecryptfs_create_underlying_file(struct inode *lower_dir_inode, * it. It will also update the eCryptfs directory inode to mimic the * stat of the lower directory inode. * - * Returns zero on success; non-zero on error condition + * Returns the new eCryptfs inode on success; an ERR_PTR on error condition */ -static int +static struct inode * ecryptfs_do_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode) { int rc; struct dentry *lower_dentry; struct dentry *lower_dir_dentry; + struct inode *inode; lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry); lower_dir_dentry = lock_parent(lower_dentry); if (IS_ERR(lower_dir_dentry)) { ecryptfs_printk(KERN_ERR, "Error locking directory of " "dentry\n"); - rc = PTR_ERR(lower_dir_dentry); + inode = ERR_CAST(lower_dir_dentry); goto out; } rc = ecryptfs_create_underlying_file(lower_dir_dentry->d_inode, @@ -195,20 +196,19 @@ ecryptfs_do_create(struct inode *directory_inode, if (rc) { printk(KERN_ERR "%s: Failure to create dentry in lower fs; " "rc = [%d]\n", __func__, rc); + inode = ERR_PTR(rc); goto out_lock; } - rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - directory_inode->i_sb); - if (rc) { - ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n"); + inode = __ecryptfs_get_inode(lower_dentry->d_inode, + directory_inode->i_sb); + if (IS_ERR(inode)) goto out_lock; - } fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode); fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode); out_lock: unlock_dir(lower_dir_dentry); out: - return rc; + return inode; } /** @@ -219,26 +219,26 @@ ecryptfs_do_create(struct inode *directory_inode, * * Returns zero on success */ -static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) +static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; int rc = 0; - if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) { + if (S_ISDIR(ecryptfs_inode->i_mode)) { ecryptfs_printk(KERN_DEBUG, "This is a directory\n"); crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED); goto out; } ecryptfs_printk(KERN_DEBUG, "Initializing crypto context\n"); - rc = ecryptfs_new_file_context(ecryptfs_dentry); + rc = ecryptfs_new_file_context(ecryptfs_inode); if (rc) { ecryptfs_printk(KERN_ERR, "Error creating new file " "context; rc = [%d]\n", rc); goto out; } - rc = ecryptfs_get_lower_file(ecryptfs_dentry, - ecryptfs_dentry->d_inode); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, ecryptfs_inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " @@ -246,10 +246,10 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) ecryptfs_dentry->d_name.name, rc); goto out; } - rc = ecryptfs_write_metadata(ecryptfs_dentry); + rc = ecryptfs_write_metadata(ecryptfs_dentry, ecryptfs_inode); if (rc) printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc); - ecryptfs_put_lower_file(ecryptfs_dentry->d_inode); + ecryptfs_put_lower_file(ecryptfs_inode); out: return rc; } @@ -269,18 +269,28 @@ static int ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode, struct nameidata *nd) { + struct inode *ecryptfs_inode; int rc; - /* ecryptfs_do_create() calls ecryptfs_interpose() */ - rc = ecryptfs_do_create(directory_inode, ecryptfs_dentry, mode); - if (unlikely(rc)) { + ecryptfs_inode = ecryptfs_do_create(directory_inode, ecryptfs_dentry, + mode); + if (unlikely(IS_ERR(ecryptfs_inode))) { ecryptfs_printk(KERN_WARNING, "Failed to create file in" "lower filesystem\n"); + rc = PTR_ERR(ecryptfs_inode); goto out; } /* At this point, a file exists on "disk"; we need to make sure * that this on disk file is prepared to be an ecryptfs file */ - rc = ecryptfs_initialize_file(ecryptfs_dentry); + rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode); + if (rc) { + drop_nlink(ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); + iput(ecryptfs_inode); + goto out; + } + d_instantiate(ecryptfs_dentry, ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); out: return rc; } From 32001d6fe9ac6b0423e674a3093aa56740849f3b Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:29 -0600 Subject: [PATCH 687/692] eCryptfs: Flush file in vma close Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326 Signed-off-by: Tyler Hicks Cc: stable@kernel.org [2.6.39+] --- fs/ecryptfs/file.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index c6ac98cf9baa..d3f95f941c47 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -139,6 +139,27 @@ static int ecryptfs_readdir(struct file *file, void *dirent, filldir_t filldir) return rc; } +static void ecryptfs_vma_close(struct vm_area_struct *vma) +{ + filemap_write_and_wait(vma->vm_file->f_mapping); +} + +static const struct vm_operations_struct ecryptfs_file_vm_ops = { + .close = ecryptfs_vma_close, + .fault = filemap_fault, +}; + +static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + int rc; + + rc = generic_file_mmap(file, vma); + if (!rc) + vma->vm_ops = &ecryptfs_file_vm_ops; + + return rc; +} + struct kmem_cache *ecryptfs_file_info_cache; /** @@ -349,7 +370,7 @@ const struct file_operations ecryptfs_main_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ecryptfs_compat_ioctl, #endif - .mmap = generic_file_mmap, + .mmap = ecryptfs_file_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, From 0f751e641a71157aa584c2a2e22fda52b52b8a56 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 23 Nov 2011 11:31:24 -0600 Subject: [PATCH 688/692] eCryptfs: Extend array bounds for all filename chars From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: Tyler Hicks Reported-by: Michael Halcrow Cc: stable@kernel.org --- fs/ecryptfs/crypto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 203a1fdff666..2a834255c75d 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1945,7 +1945,7 @@ static unsigned char *portable_filename_chars = ("-.0123456789ABCD" /* We could either offset on every reverse map or just pad some 0x00's * at the front here */ -static const unsigned char filename_rev_map[] = { +static const unsigned char filename_rev_map[256] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 15 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 23 */ @@ -1961,7 +1961,7 @@ static const unsigned char filename_rev_map[] = { 0x00, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, /* 103 */ 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, /* 111 */ 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, /* 119 */ - 0x3D, 0x3E, 0x3F + 0x3D, 0x3E, 0x3F /* 123 - 255 initialized to 0x00 */ }; /** From bd20817f733ceb0291e0449106307ffc939006ba Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 15 Nov 2011 10:13:24 +0100 Subject: [PATCH 689/692] virtio: add HAS_IOMEM dependency to MMIO platform bus driver Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger Signed-off-by: Heiko Carstens Acked-by: Pawel Moll Signed-off-by: Rusty Russell --- drivers/virtio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 816ed08e7cf3..1a61939b85fc 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -37,7 +37,7 @@ config VIRTIO_BALLOON config VIRTIO_MMIO tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on HAS_IOMEM && EXPERIMENTAL select VIRTIO select VIRTIO_RING ---help--- From fe1a7fe2c4456679b3402f04268bdfafca7b127a Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 15 Nov 2011 16:17:18 +0200 Subject: [PATCH 690/692] virtio-mmio: Correct the name of the guest features selector Guest features selector spelling mistake. Cc: Pawel Moll Cc: Rusty Russell Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_mmio.c | 2 +- include/linux/virtio_mmio.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index acc5e43c373e..7317dc2ec426 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -118,7 +118,7 @@ static void vm_finalize_features(struct virtio_device *vdev) vring_transport_features(vdev); for (i = 0; i < ARRAY_SIZE(vdev->features); i++) { - writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET); + writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SEL); writel(vdev->features[i], vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES); } diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h index 27c7edefbc86..5c7b6f0daef8 100644 --- a/include/linux/virtio_mmio.h +++ b/include/linux/virtio_mmio.h @@ -63,7 +63,7 @@ #define VIRTIO_MMIO_GUEST_FEATURES 0x020 /* Activated features set selector - Write Only */ -#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024 +#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 /* Guest's memory page size in bytes - Write Only */ #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 From e6af578c5305be693a1bc7f4dc7b51dd82d41425 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 17 Nov 2011 17:41:15 +0200 Subject: [PATCH 691/692] virtio-pci: make reset operation safer virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 18 ++++++++++++++++++ include/linux/virtio_config.h | 2 ++ 2 files changed, 20 insertions(+) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 3d1bf41e8892..03d1984bd363 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -169,11 +169,29 @@ static void vp_set_status(struct virtio_device *vdev, u8 status) iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS); } +/* wait for pending irq handlers */ +static void vp_synchronize_vectors(struct virtio_device *vdev) +{ + struct virtio_pci_device *vp_dev = to_vp_device(vdev); + int i; + + if (vp_dev->intx_enabled) + synchronize_irq(vp_dev->pci_dev->irq); + + for (i = 0; i < vp_dev->msix_vectors; ++i) + synchronize_irq(vp_dev->msix_entries[i].vector); +} + static void vp_reset(struct virtio_device *vdev) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* 0 status means a reset. */ iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush out the status write, and flush in device writes, + * including MSi-X interrupts, if any. */ + ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush pending VQ/configuration callbacks. */ + vp_synchronize_vectors(vdev); } /* the notify function used when creating a virt queue */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index add4790b21fe..e9e72bda1b72 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -85,6 +85,8 @@ * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again + * Device must not be reset from its vq/config callbacks, or in + * parallel with being added/removed. * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device * nvqs: the number of virtqueues to find From caca6a03d365883564885f2c1da3e88dcf65d139 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Nov 2011 20:20:28 -0800 Subject: [PATCH 692/692] Linux 3.2-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index dab8610c4d6f..3a8f0640cda0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION*