ARM: davinci: da850: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-da850-evm.c

@@ -1340,6 +1340,8 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	da850_register_clocks();
+
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);

arch/arm/mach-davinci/board-mityomapl138.c

@@ -503,6 +503,8 @@ static void __init mityomapl138_init(void)
 {
 	int ret;
 
+	da850_register_clocks();
+
 	/* for now, no special EDMA channels are reserved */
 	ret = da850_register_edma(NULL);
 	if (ret)

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -285,6 +285,8 @@ static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
+	da850_register_clocks();
+
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);

arch/arm/mach-davinci/da850.c

@@ -11,39 +11,45 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
 #include <linux/clkdev.h>
+#include <linux/cpufreq.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/regulator/consumer.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
+#include <linux/platform_data/clk-davinci-pll.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/mach/map.h>
 
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
 #include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
 #include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
 #include <mach/pm.h>
+#include <mach/time.h>
 
-#include "clock.h"
 #include "mux.h"
 
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
 #define DA850_PLL1_BASE		0x01e1a000
 #define DA850_TIMER64P2_BASE	0x01f0c000
 #define DA850_TIMER64P3_BASE	0x01f0d000
 
 #define DA850_REF_FREQ		24000000
 
-#define CFGCHIP3_ASYNC3_CLKSRC	BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK	BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK	BIT(4)
-
+#ifndef CONFIG_COMMON_CLK
 static int da850_set_armrate(struct clk *clk, unsigned long rate);
 static int da850_round_armrate(struct clk *clk, unsigned long rate);
 static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -583,6 +589,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("ecap.2",		"fck",		&ecap2_clk),
 	CLK(NULL,		NULL,		NULL),
 };
+#endif
 
 /*
  * Device specific mux setup
@@ -1170,6 +1177,7 @@ int da850_register_cpufreq(char *async_clk)
 	return platform_device_register(&da850_cpufreq_device);
 }
 
+#ifndef CONFIG_COMMON_CLK
 static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
 	int ret = 0, diff;
@@ -1232,12 +1240,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
+#endif /* CONFIG_COMMON_CLK */
 #else
 int __init da850_register_cpufreq(char *async_clk)
 {
 	return 0;
 }
 
+#ifndef CONFIG_COMMON_CLK
 static int da850_set_armrate(struct clk *clk, unsigned long rate)
 {
 	return -EINVAL;
@@ -1252,6 +1262,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
 	return clk->rate;
 }
+#endif /* CONFIG_COMMON_CLK */
 #endif
 
 /* VPIF resource, platform data */
@@ -1395,6 +1406,124 @@ void __init da850_init(void)
 
 void __init da850_init_time(void)
 {
+#ifdef CONFIG_COMMON_CLK
+	void __iomem *pll0;
+	struct regmap *cfgchip;
+	struct clk *clk;
+
+	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+
+	pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+	cfgchip = da8xx_get_cfgchip();
+
+	da850_pll0_init(NULL, pll0, cfgchip);
+
+	clk = clk_get(NULL, "timer0");
+
+	davinci_timer_init(clk);
+#else
 	davinci_clk_init(da850_clks);
 	davinci_timer_init(&timerp64_0_clk);
+#endif
+}
+
+static struct resource da850_pll1_resources[] = {
+	{
+		.start	= DA850_PLL1_BASE,
+		.end	= DA850_PLL1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct davinci_pll_platform_data da850_pll1_pdata;
+
+static struct platform_device da850_pll1_device = {
+	.name		= "da850-pll1",
+	.id		= -1,
+	.resource	= da850_pll1_resources,
+	.num_resources	= ARRAY_SIZE(da850_pll1_resources),
+	.dev		= {
+		.platform_data	= &da850_pll1_pdata,
+	},
+};
+
+static struct resource da850_psc0_resources[] = {
+	{
+		.start	= DA8XX_PSC0_BASE,
+		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_psc0_device = {
+	.name		= "da850-psc0",
+	.id		= -1,
+	.resource	= da850_psc0_resources,
+	.num_resources	= ARRAY_SIZE(da850_psc0_resources),
+};
+
+static struct resource da850_psc1_resources[] = {
+	{
+		.start	= DA8XX_PSC1_BASE,
+		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_psc1_device = {
+	.name		= "da850-psc1",
+	.id		= -1,
+	.resource	= da850_psc1_resources,
+	.num_resources	= ARRAY_SIZE(da850_psc1_resources),
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
+
+static struct platform_device da850_async1_clksrc_device = {
+	.name		= "da850-async1-clksrc",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &da850_async1_pdata,
+	},
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
+
+static struct platform_device da850_async3_clksrc_device = {
+	.name		= "da850-async3-clksrc",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &da850_async3_pdata,
+	},
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
+
+static struct platform_device da850_tbclksync_device = {
+	.name		= "da830-tbclksync",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &da850_tbclksync_pdata,
+	},
+};
+
+void __init da850_register_clocks(void)
+{
+	/* PLL0 is registered in da850_init_time() */
+
+	da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
+	platform_device_register(&da850_pll1_device);
+
+	da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
+	platform_device_register(&da850_async1_clksrc_device);
+
+	da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
+	platform_device_register(&da850_async3_clksrc_device);
+
+	platform_device_register(&da850_psc0_device);
+
+	platform_device_register(&da850_psc1_device);
+
+	da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
+	platform_device_register(&da850_tbclksync_device);
 }

arch/arm/mach-davinci/da8xx-dt.c

@@ -67,6 +67,8 @@ static void __init da850_init_machine(void)
 
 	int ret;
 
+	da850_register_clocks();
+
 	ret = da8xx_register_usb20_phy_clk(false);
 	if (ret)
 		pr_warn("%s: registering USB 2.0 PHY clock failed: %d",

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -93,6 +93,7 @@ void da830_register_clocks(void);
 
 void da850_init(void);
 void da850_init_time(void);
+void da850_register_clocks(void);
 
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);