diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ed7b01c4bd41..3e91fa33c7a0 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1035,62 +1035,6 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 	  Say N if unsure.
 
-# Both the "perf" and "buddy" hardlockup detectors count hrtimer
-# interrupts. This config enables functions managing this common code.
-config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-	bool
-	select SOFTLOCKUP_DETECTOR
-
-config HARDLOCKUP_DETECTOR_PERF
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-config HARDLOCKUP_DETECTOR_BUDDY
-	bool
-	depends on SMP
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-# For hardlockup detectors you can have one directly provided by the arch
-# or use a "non-arch" one. If you're using a "non-arch" one that is
-# further divided the perf hardlockup detector (which, confusingly, needs
-# arch-provided perf support) and the buddy hardlockup detector (which just
-# needs SMP). In either case, using the "non-arch" code conflicts with
-# the NMI watchdog code (which is sometimes used directly and sometimes used
-# by the arch-provided hardlockup detector).
-config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
-	default y
-
-config HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	bool "Prefer the buddy CPU hardlockup detector"
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
-	help
-	  Say Y here to prefer the buddy hardlockup detector over the perf one.
-
-	  With the buddy detector, each CPU uses its softlockup hrtimer
-	  to check that the next CPU is processing hrtimer interrupts by
-	  verifying that a counter is increasing.
-
-	  This hardlockup detector is useful on systems that don't have
-	  an arch-specific hardlockup detector or if resources needed
-	  for the hardlockup detector are better used for other things.
-
-# This will select the appropriate non-arch hardlockdup detector
-config HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-
-#
-# Enables a timestamp based low pass filter to compensate for perf based
-# hard lockup detection which runs too fast due to turbo modes.
-#
-config HARDLOCKUP_CHECK_TIMESTAMP
-	bool
-
 #
 # arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
 # lockup detector rather than the perf based detector.
@@ -1111,6 +1055,62 @@ config HARDLOCKUP_DETECTOR
 	  chance to run.  The current stack trace is displayed upon detection
 	  and the system will stay locked up.
 
+config HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	bool "Prefer the buddy CPU hardlockup detector"
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
+	help
+	  Say Y here to prefer the buddy hardlockup detector over the perf one.
+
+	  With the buddy detector, each CPU uses its softlockup hrtimer
+	  to check that the next CPU is processing hrtimer interrupts by
+	  verifying that a counter is increasing.
+
+	  This hardlockup detector is useful on systems that don't have
+	  an arch-specific hardlockup detector or if resources needed
+	  for the hardlockup detector are better used for other things.
+
+config HARDLOCKUP_DETECTOR_PERF
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+config HARDLOCKUP_DETECTOR_BUDDY
+	bool
+	depends on SMP
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+# Both the "perf" and "buddy" hardlockup detectors count hrtimer
+# interrupts. This config enables functions managing this common code.
+config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+	bool
+	select SOFTLOCKUP_DETECTOR
+
+# For hardlockup detectors you can have one directly provided by the arch
+# or use a "non-arch" one. If you're using a "non-arch" one that is
+# further divided the perf hardlockup detector (which, confusingly, needs
+# arch-provided perf support) and the buddy hardlockup detector (which just
+# needs SMP). In either case, using the "non-arch" code conflicts with
+# the NMI watchdog code (which is sometimes used directly and sometimes used
+# by the arch-provided hardlockup detector).
+config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
+	default y
+
+# This will select the appropriate non-arch hardlockdup detector
+config HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
+
+#
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+	bool
+
 config BOOTPARAM_HARDLOCKUP_PANIC
 	bool "Panic (Reboot) On Hard Lockups"
 	depends on HARDLOCKUP_DETECTOR