mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 00:40:03 +00:00
net: vrf: Documentation update, ip commands
Add ip commands with examples for creating VRF devics, enslaving interfaces and dumping VRF-focused data (address, neighbors, routes). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
c3643885aa
commit
4b418bff3d
1 changed files with 299 additions and 2 deletions
|
@ -90,7 +90,304 @@ or to specify the output device using cmsg and IP_PKTINFO.
|
|||
|
||||
Limitations
|
||||
-----------
|
||||
VRF device currently only works for IPv4. Support for IPv6 is under development.
|
||||
|
||||
Index of original ingress interface is not available via cmsg. Will address
|
||||
soon.
|
||||
|
||||
################################################################################
|
||||
|
||||
Using iproute2 for VRFs
|
||||
=======================
|
||||
VRF devices do *not* have to start with 'vrf-'. That is a convention used here
|
||||
for emphasis of the device type, similar to use of 'br' in bridge names.
|
||||
|
||||
1. Create a VRF
|
||||
|
||||
To instantiate a VRF device and associate it with a table:
|
||||
$ ip link add dev NAME type vrf table ID
|
||||
|
||||
Remember to add the ip rules as well:
|
||||
$ ip ru add oif NAME table 10
|
||||
$ ip ru add iif NAME table 10
|
||||
$ ip -6 ru add oif NAME table 10
|
||||
$ ip -6 ru add iif NAME table 10
|
||||
|
||||
Without the rules route lookups are not directed to the table.
|
||||
|
||||
For example:
|
||||
$ ip link add dev vrf-blue type vrf table 10
|
||||
$ ip ru add pref 200 oif vrf-blue table 10
|
||||
$ ip ru add pref 200 iif vrf-blue table 10
|
||||
$ ip -6 ru add pref 200 oif vrf-blue table 10
|
||||
$ ip -6 ru add pref 200 iif vrf-blue table 10
|
||||
|
||||
|
||||
2. List VRFs
|
||||
|
||||
To list VRFs that have been created:
|
||||
$ ip [-d] link show type vrf
|
||||
NOTE: The -d option is needed to show the table id
|
||||
|
||||
For example:
|
||||
$ ip -d link show type vrf
|
||||
11: vrf-mgmt: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
||||
link/ether 72:b3:ba:91:e2:24 brd ff:ff:ff:ff:ff:ff promiscuity 0
|
||||
vrf table 1 addrgenmode eui64
|
||||
12: vrf-red: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
||||
link/ether b6:6f:6e:f6:da:73 brd ff:ff:ff:ff:ff:ff promiscuity 0
|
||||
vrf table 10 addrgenmode eui64
|
||||
13: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
||||
link/ether 36:62:e8:7d:bb:8c brd ff:ff:ff:ff:ff:ff promiscuity 0
|
||||
vrf table 66 addrgenmode eui64
|
||||
14: vrf-green: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
||||
link/ether e6:28:b8:63:70:bb brd ff:ff:ff:ff:ff:ff promiscuity 0
|
||||
vrf table 81 addrgenmode eui64
|
||||
|
||||
|
||||
Or in brief output:
|
||||
|
||||
$ ip -br link show type vrf
|
||||
vrf-mgmt UP 72:b3:ba:91:e2:24 <NOARP,MASTER,UP,LOWER_UP>
|
||||
vrf-red UP b6:6f:6e:f6:da:73 <NOARP,MASTER,UP,LOWER_UP>
|
||||
vrf-blue UP 36:62:e8:7d:bb:8c <NOARP,MASTER,UP,LOWER_UP>
|
||||
vrf-green UP e6:28:b8:63:70:bb <NOARP,MASTER,UP,LOWER_UP>
|
||||
|
||||
|
||||
3. Assign a Network Interface to a VRF
|
||||
|
||||
Network interfaces are assigned to a VRF by enslaving the netdevice to a
|
||||
VRF device:
|
||||
$ ip link set dev NAME master VRF-NAME
|
||||
|
||||
On enslavement connected and local routes are automatically moved to the
|
||||
table associated with the VRF device.
|
||||
|
||||
For example:
|
||||
$ ip link set dev eth0 master vrf-mgmt
|
||||
|
||||
|
||||
4. Show Devices Assigned to a VRF
|
||||
|
||||
To show devices that have been assigned to a specific VRF add the master
|
||||
option to the ip command:
|
||||
$ ip link show master VRF-NAME
|
||||
|
||||
For example:
|
||||
$ ip link show master vrf-red
|
||||
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000
|
||||
link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff
|
||||
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000
|
||||
link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff
|
||||
7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN mode DEFAULT group default qlen 1000
|
||||
link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff
|
||||
|
||||
|
||||
Or using the brief output:
|
||||
$ ip -br link show master vrf-red
|
||||
eth1 UP 02:00:00:00:02:02 <BROADCAST,MULTICAST,UP,LOWER_UP>
|
||||
eth2 UP 02:00:00:00:02:03 <BROADCAST,MULTICAST,UP,LOWER_UP>
|
||||
eth5 DOWN 02:00:00:00:02:06 <BROADCAST,MULTICAST>
|
||||
|
||||
|
||||
5. Show Neighbor Entries for a VRF
|
||||
|
||||
To list neighbor entries associated with devices enslaved to a VRF device
|
||||
add the master option to the ip command:
|
||||
$ ip [-6] neigh show master VRF-NAME
|
||||
|
||||
For example:
|
||||
$ ip neigh show master vrf-red
|
||||
10.2.1.254 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE
|
||||
10.2.2.254 dev eth2 lladdr 5e:54:01:6a:ee:80 REACHABLE
|
||||
|
||||
$ ip -6 neigh show master vrf-red
|
||||
2002:1::64 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE
|
||||
|
||||
|
||||
6. Show Addresses for a VRF
|
||||
|
||||
To show addresses for interfaces associated with a VRF add the master
|
||||
option to the ip command:
|
||||
$ ip addr show master VRF-NAME
|
||||
|
||||
For example:
|
||||
$ ip addr show master vrf-red
|
||||
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000
|
||||
link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff
|
||||
inet 10.2.1.2/24 brd 10.2.1.255 scope global eth1
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 2002:1::2/120 scope global
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 fe80::ff:fe00:202/64 scope link
|
||||
valid_lft forever preferred_lft forever
|
||||
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000
|
||||
link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff
|
||||
inet 10.2.2.2/24 brd 10.2.2.255 scope global eth2
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 2002:2::2/120 scope global
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 fe80::ff:fe00:203/64 scope link
|
||||
valid_lft forever preferred_lft forever
|
||||
7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN group default qlen 1000
|
||||
link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff
|
||||
|
||||
Or in brief format:
|
||||
$ ip -br addr show master vrf-red
|
||||
eth1 UP 10.2.1.2/24 2002:1::2/120 fe80::ff:fe00:202/64
|
||||
eth2 UP 10.2.2.2/24 2002:2::2/120 fe80::ff:fe00:203/64
|
||||
eth5 DOWN
|
||||
|
||||
|
||||
7. Show Routes for a VRF
|
||||
|
||||
To show routes for a VRF use the ip command to display the table associated
|
||||
with the VRF device:
|
||||
$ ip [-6] route show table ID
|
||||
|
||||
For example:
|
||||
$ ip route show table vrf-red
|
||||
prohibit default
|
||||
broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2
|
||||
10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2
|
||||
local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2
|
||||
broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2
|
||||
broadcast 10.2.2.0 dev eth2 proto kernel scope link src 10.2.2.2
|
||||
10.2.2.0/24 dev eth2 proto kernel scope link src 10.2.2.2
|
||||
local 10.2.2.2 dev eth2 proto kernel scope host src 10.2.2.2
|
||||
broadcast 10.2.2.255 dev eth2 proto kernel scope link src 10.2.2.2
|
||||
|
||||
$ ip -6 route show table vrf-red
|
||||
local 2002:1:: dev lo proto none metric 0 pref medium
|
||||
local 2002:1::2 dev lo proto none metric 0 pref medium
|
||||
2002:1::/120 dev eth1 proto kernel metric 256 pref medium
|
||||
local 2002:2:: dev lo proto none metric 0 pref medium
|
||||
local 2002:2::2 dev lo proto none metric 0 pref medium
|
||||
2002:2::/120 dev eth2 proto kernel metric 256 pref medium
|
||||
local fe80:: dev lo proto none metric 0 pref medium
|
||||
local fe80:: dev lo proto none metric 0 pref medium
|
||||
local fe80::ff:fe00:202 dev lo proto none metric 0 pref medium
|
||||
local fe80::ff:fe00:203 dev lo proto none metric 0 pref medium
|
||||
fe80::/64 dev eth1 proto kernel metric 256 pref medium
|
||||
fe80::/64 dev eth2 proto kernel metric 256 pref medium
|
||||
ff00::/8 dev vrf-red metric 256 pref medium
|
||||
ff00::/8 dev eth1 metric 256 pref medium
|
||||
ff00::/8 dev eth2 metric 256 pref medium
|
||||
|
||||
|
||||
8. Route Lookup for a VRF
|
||||
|
||||
A test route lookup can be done for a VRF by adding the oif option to ip:
|
||||
$ ip [-6] route get oif VRF-NAME ADDRESS
|
||||
|
||||
For example:
|
||||
$ ip route get 10.2.1.40 oif vrf-red
|
||||
10.2.1.40 dev eth1 table vrf-red src 10.2.1.2
|
||||
cache
|
||||
|
||||
$ ip -6 route get 2002:1::32 oif vrf-red
|
||||
2002:1::32 from :: dev eth1 table vrf-red proto kernel src 2002:1::2 metric 256 pref medium
|
||||
|
||||
|
||||
9. Removing Network Interface from a VRF
|
||||
|
||||
Network interfaces are removed from a VRF by breaking the enslavement to
|
||||
the VRF device:
|
||||
$ ip link set dev NAME nomaster
|
||||
|
||||
Connected routes are moved back to the default table and local entries are
|
||||
moved to the local table.
|
||||
|
||||
For example:
|
||||
$ ip link set dev eth0 nomaster
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
Commands used in this example:
|
||||
|
||||
cat >> /etc/iproute2/rt_tables <<EOF
|
||||
1 vrf-mgmt
|
||||
10 vrf-red
|
||||
66 vrf-blue
|
||||
81 vrf-green
|
||||
EOF
|
||||
|
||||
function vrf_create
|
||||
{
|
||||
VRF=$1
|
||||
TBID=$2
|
||||
# create VRF device
|
||||
ip link add vrf-${VRF} type vrf table ${TBID}
|
||||
|
||||
# add rules that direct lookups to vrf table
|
||||
ip ru add pref 200 oif vrf-${VRF} table ${TBID}
|
||||
ip ru add pref 200 iif vrf-${VRF} table ${TBID}
|
||||
ip -6 ru add pref 200 oif vrf-${VRF} table ${TBID}
|
||||
ip -6 ru add pref 200 iif vrf-${VRF} table ${TBID}
|
||||
|
||||
if [ "${VRF}" != "mgmt" ]; then
|
||||
ip route add table ${TBID} prohibit default
|
||||
fi
|
||||
ip link set dev vrf-${VRF} up
|
||||
ip link set dev vrf-${VRF} state up
|
||||
}
|
||||
|
||||
vrf_create mgmt 1
|
||||
ip link set dev eth0 master vrf-mgmt
|
||||
|
||||
vrf_create red 10
|
||||
ip link set dev eth1 master vrf-red
|
||||
ip link set dev eth2 master vrf-red
|
||||
ip link set dev eth5 master vrf-red
|
||||
|
||||
vrf_create blue 66
|
||||
ip link set dev eth3 master vrf-blue
|
||||
|
||||
vrf_create green 81
|
||||
ip link set dev eth4 master vrf-green
|
||||
|
||||
|
||||
Interface addresses from /etc/network/interfaces:
|
||||
auto eth0
|
||||
iface eth0 inet static
|
||||
address 10.0.0.2
|
||||
netmask 255.255.255.0
|
||||
gateway 10.0.0.254
|
||||
|
||||
iface eth0 inet6 static
|
||||
address 2000:1::2
|
||||
netmask 120
|
||||
|
||||
auto eth1
|
||||
iface eth1 inet static
|
||||
address 10.2.1.2
|
||||
netmask 255.255.255.0
|
||||
|
||||
iface eth1 inet6 static
|
||||
address 2002:1::2
|
||||
netmask 120
|
||||
|
||||
auto eth2
|
||||
iface eth2 inet static
|
||||
address 10.2.2.2
|
||||
netmask 255.255.255.0
|
||||
|
||||
iface eth2 inet6 static
|
||||
address 2002:2::2
|
||||
netmask 120
|
||||
|
||||
auto eth3
|
||||
iface eth3 inet static
|
||||
address 10.2.3.2
|
||||
netmask 255.255.255.0
|
||||
|
||||
iface eth3 inet6 static
|
||||
address 2002:3::2
|
||||
netmask 120
|
||||
|
||||
auto eth4
|
||||
iface eth4 inet static
|
||||
address 10.2.4.2
|
||||
netmask 255.255.255.0
|
||||
|
||||
iface eth4 inet6 static
|
||||
address 2002:4::2
|
||||
netmask 120
|
||||
|
|
Loading…
Reference in a new issue