From 4b445d47897d97166d2d3063fbe72b496a84dbd0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 27 Sep 2018 16:58:54 -0700 Subject: [PATCH] nvme: call nvme_complete_rq when nvmf_check_ready fails for mpath I/O [ Upstream commit 783f4a4408e1251d17f333ad56abac24dde988b9 ] When an io is rejected by nvmf_check_ready() due to validation of the controller state, the nvmf_fail_nonready_command() will normally return BLK_STS_RESOURCE to requeue and retry. However, if the controller is dying or the I/O is marked for NVMe multipath, the I/O is failed so that the controller can terminate or so that the io can be issued on a different path. Unfortunately, as this reject point is before the transport has accepted the command, blk-mq ends up completing the I/O and never calls nvme_complete_rq(), which is where multipath may preserve or re-route the I/O. The end result is, the device user ends up seeing an EIO error. Example: single path connectivity, controller is under load, and a reset is induced. An I/O is received: a) while the reset state has been set but the queues have yet to be stopped; or b) after queues are started (at end of reset) but before the reconnect has completed. The I/O finishes with an EIO status. This patch makes the following changes: - Adds the HOST_PATH_ERROR pathing status from TP4028 - Modifies the reject point such that it appears to queue successfully, but actually completes the io with the new pathing status and calls nvme_complete_rq(). - nvme_complete_rq() recognizes the new status, avoids resetting the controller (likely was already done in order to get this new status), and calls the multipather to clear the current path that errored. This allows the next command (retry or new command) to select a new path if there is one. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/nvme/host/fabrics.c | 7 +++++-- drivers/nvme/host/multipath.c | 7 +++++++ include/linux/nvme.h | 1 + 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 206d63cb1afc..bcd09d3a44da 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -552,8 +552,11 @@ blk_status_t nvmf_fail_nonready_command(struct nvme_ctrl *ctrl, ctrl->state != NVME_CTRL_DEAD && !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) return BLK_STS_RESOURCE; - nvme_req(rq)->status = NVME_SC_ABORT_REQ; - return BLK_STS_IOERR; + + nvme_req(rq)->status = NVME_SC_HOST_PATH_ERROR; + blk_mq_start_request(rq); + nvme_complete_rq(rq); + return BLK_STS_OK; } EXPORT_SYMBOL_GPL(nvmf_fail_nonready_command); diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 9fe3fff818b8..b71c9ad1bf45 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -77,6 +77,13 @@ void nvme_failover_req(struct request *req) queue_work(nvme_wq, &ns->ctrl->ana_work); } break; + case NVME_SC_HOST_PATH_ERROR: + /* + * Temporary transport disruption in talking to the controller. + * Try to send on a new path. + */ + nvme_mpath_clear_current_path(ns); + break; default: /* * Reset the controller for any non-ANA error as we don't know diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 68e91ef5494c..818dbe9331be 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -1241,6 +1241,7 @@ enum { NVME_SC_ANA_PERSISTENT_LOSS = 0x301, NVME_SC_ANA_INACCESSIBLE = 0x302, NVME_SC_ANA_TRANSITION = 0x303, + NVME_SC_HOST_PATH_ERROR = 0x370, NVME_SC_DNR = 0x4000, };