This tag contains habanalabs driver changes for v5.15:

- Add a new uAPI (under the cs ioctl) to enable to user to reserve
   signals and signal them from within its workloads, while the driver
   performs the waiting. This allows finer granularity of pipelining
   between the different engines and resource utilization.
 
 - Add a new uAPI (under the wait_for_cs ioctl) to allow waiting
   on multiple command submissions (workloads) at the same time. This
   is an optimization for the user process so it won't need to call
   multiple times to the wait_for_cs ioctl.
 
 - Add new feature of "state dump", which can be triggered through new
   debugfs node. This is a similar concept to the kernel panic dump.
   This new mechanism retrieves information from the device in case
   one of the workloads that was sent by the user got stuck. This is
   very helpful for debugging the hang.
 
 - Add a new debugfs node to perform lookup of user pointers that are
   mapped to habana device's pmmu.
 
 - Fix to the tracking of user process when running inside a container.
 
 - Allow user to map more than 4GB of memory to the device MMU in single
   IOCTL call.
 
 - Minimize number of register reads done in GAUDI during user operation.
 
 - Allow user to retrieve the device's server type that the device is
   connected to.
 
 - Several fixes to the code of waiting on interrupts on behalf of the
   user.
 
 - Fixes and improvements to the hint mechanism in our VA allocation.
 
 - Update the firmware header files to the latest version while
   maintaining backward compatibility with older firmware versions.
 
 - Multiple fixes to various bugs.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmEvnt8ACgkQZR1NuKta
 54B6GwgAgDZE/watviT5VzS/Cb5wXitOjLfq9eEOVqwD7+sT0c6PDSpIMiFnz4BV
 yCPttVAWJPgcQFde/6WXHz8kAsG1dMDQ6ClXHWwNyhxdjVuRAeoHjChlkoW3E0SW
 ZiSoWcQy6bCPmy0mfy6reZsJzO1IOokW0QpYVbQKbxaxS9TdVKhBIMWkALUPqQCz
 JfA2LEn4ZMbQIGdcm7gb5NI2xlBok94IKv3D5i9Isy3IyT1+yIYoncHZHDwBK6oV
 uhVvQK4it8i+wfEbxE1CHavPmXQXlvziIZNQ0TqlAOzncN4tc6a3mSdnJKcpinmS
 Gy93ceWgXxJDZbpTIXHB18lMg4z5yg==
 =I/ND
 -----END PGP SIGNATURE-----

Merge tag 'misc-habanalabs-next-2021-09-01' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next

Oded writes:

This tag contains habanalabs driver changes for v5.15:

- Add a new uAPI (under the cs ioctl) to enable to user to reserve
  signals and signal them from within its workloads, while the driver
  performs the waiting. This allows finer granularity of pipelining
  between the different engines and resource utilization.

- Add a new uAPI (under the wait_for_cs ioctl) to allow waiting
  on multiple command submissions (workloads) at the same time. This
  is an optimization for the user process so it won't need to call
  multiple times to the wait_for_cs ioctl.

- Add new feature of "state dump", which can be triggered through new
  debugfs node. This is a similar concept to the kernel panic dump.
  This new mechanism retrieves information from the device in case
  one of the workloads that was sent by the user got stuck. This is
  very helpful for debugging the hang.

- Add a new debugfs node to perform lookup of user pointers that are
  mapped to habana device's pmmu.

- Fix to the tracking of user process when running inside a container.

- Allow user to map more than 4GB of memory to the device MMU in single
  IOCTL call.

- Minimize number of register reads done in GAUDI during user operation.

- Allow user to retrieve the device's server type that the device is
  connected to.

- Several fixes to the code of waiting on interrupts on behalf of the
  user.

- Fixes and improvements to the hint mechanism in our VA allocation.

- Update the firmware header files to the latest version while
  maintaining backward compatibility with older firmware versions.

- Multiple fixes to various bugs.

* tag 'misc-habanalabs-next-2021-09-01' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (61 commits)
  habanalabs/gaudi: hwmon default card name
  habanalabs: add support for f/w reset
  habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
  habanalabs: cannot sleep while holding spinlock
  habanalabs: never copy_from_user inside spinlock
  habanalabs: remove unnecessary device status check
  habanalabs: disable IRQ in user interrupts spinlock
  habanalabs: add "in device creation" status
  habanalabs/gaudi: invalidate PMMU mem cache on init
  habanalabs/gaudi: size should be printed in decimal
  habanalabs/gaudi: define DC POWER for secured PMC
  habanalabs/gaudi: unmask out of bounds SLM access interrupt
  habanalabs: add userptr_lookup node in debugfs
  habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
  habanalabs: modify multi-CS to wait on stream masters
  habanalabs/gaudi: add monitored SOBs to state dump
  habanalabs/gaudi: restore user registers when context opens
  habanalabs/gaudi: increase boot fit timeout
  habanalabs: update to latest firmware headers
  habanalabs/gaudi: minimize number of register reads
  ...
This commit is contained in:
Greg Kroah-Hartman 2021-09-01 20:13:05 +02:00
commit 4cd67adc44
28 changed files with 3880 additions and 796 deletions

View file

@ -215,6 +215,17 @@ Description: Sets the skip reset on timeout option for the device. Value of
"0" means device will be reset in case some CS has timed out,
otherwise it will not be reset.
What: /sys/kernel/debug/habanalabs/hl<n>/state_dump
Date: Oct 2021
KernelVersion: 5.15
Contact: ynudelman@habana.ai
Description: Gets the state dump occurring on a CS timeout or failure.
State dump is used for debug and is created each time in case of
a problem in a CS execution, before reset.
Reading from the node returns the newest state dump available.
Writing an integer X discards X state dumps, so that the
next read would return X+1-st newest state dump.
What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
Date: Mar 2020
KernelVersion: 5.6
@ -230,6 +241,14 @@ Description: Displays a list with information about the currently user
pointers (user virtual addresses) that are pinned and mapped
to DMA addresses
What: /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
Date: Aug 2021
KernelVersion: 5.15
Contact: ogabbay@kernel.org
Description: Allows to search for specific user pointers (user virtual
addresses) that are pinned and mapped to DMA addresses, and see
their resolution to the specific dma address.
What: /sys/kernel/debug/habanalabs/hl<n>/vm
Date: Jan 2019
KernelVersion: 5.1

View file

@ -10,4 +10,5 @@ HL_COMMON_FILES := common/habanalabs_drv.o common/device.o common/context.o \
common/asid.o common/habanalabs_ioctl.o \
common/command_buffer.o common/hw_queue.o common/irq.o \
common/sysfs.o common/hwmon.o common/memory.o \
common/command_submission.o common/firmware_if.o
common/command_submission.o common/firmware_if.o \
common/state_dump.o

View file

@ -314,8 +314,6 @@ int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
spin_lock(&mgr->cb_lock);
rc = idr_alloc(&mgr->cb_handles, cb, 1, 0, GFP_ATOMIC);
if (rc < 0)
rc = idr_alloc(&mgr->cb_handles, cb, 1, 0, GFP_KERNEL);
spin_unlock(&mgr->cb_lock);
if (rc < 0) {
@ -552,7 +550,7 @@ int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
vma->vm_private_data = cb;
rc = hdev->asic_funcs->cb_mmap(hdev, vma, cb->kernel_address,
rc = hdev->asic_funcs->mmap(hdev, vma, cb->kernel_address,
cb->bus_address, cb->size);
if (rc) {
spin_lock(&cb->lock);

File diff suppressed because it is too large Load diff

View file

@ -9,16 +9,70 @@
#include <linux/slab.h>
void hl_encaps_handle_do_release(struct kref *ref)
{
struct hl_cs_encaps_sig_handle *handle =
container_of(ref, struct hl_cs_encaps_sig_handle, refcount);
struct hl_ctx *ctx = handle->hdev->compute_ctx;
struct hl_encaps_signals_mgr *mgr = &ctx->sig_mgr;
spin_lock(&mgr->lock);
idr_remove(&mgr->handles, handle->id);
spin_unlock(&mgr->lock);
kfree(handle);
}
static void hl_encaps_handle_do_release_sob(struct kref *ref)
{
struct hl_cs_encaps_sig_handle *handle =
container_of(ref, struct hl_cs_encaps_sig_handle, refcount);
struct hl_ctx *ctx = handle->hdev->compute_ctx;
struct hl_encaps_signals_mgr *mgr = &ctx->sig_mgr;
/* if we're here, then there was a signals reservation but cs with
* encaps signals wasn't submitted, so need to put refcount
* to hw_sob taken at the reservation.
*/
hw_sob_put(handle->hw_sob);
spin_lock(&mgr->lock);
idr_remove(&mgr->handles, handle->id);
spin_unlock(&mgr->lock);
kfree(handle);
}
static void hl_encaps_sig_mgr_init(struct hl_encaps_signals_mgr *mgr)
{
spin_lock_init(&mgr->lock);
idr_init(&mgr->handles);
}
static void hl_encaps_sig_mgr_fini(struct hl_device *hdev,
struct hl_encaps_signals_mgr *mgr)
{
struct hl_cs_encaps_sig_handle *handle;
struct idr *idp;
u32 id;
idp = &mgr->handles;
if (!idr_is_empty(idp)) {
dev_warn(hdev->dev, "device released while some encaps signals handles are still allocated\n");
idr_for_each_entry(idp, handle, id)
kref_put(&handle->refcount,
hl_encaps_handle_do_release_sob);
}
idr_destroy(&mgr->handles);
}
static void hl_ctx_fini(struct hl_ctx *ctx)
{
struct hl_device *hdev = ctx->hdev;
int i;
/* Release all allocated pending cb's, those cb's were never
* scheduled so it is safe to release them here
*/
hl_pending_cb_list_flush(ctx);
/* Release all allocated HW block mapped list entries and destroy
* the mutex.
*/
@ -53,6 +107,7 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
hl_cb_va_pool_fini(ctx);
hl_vm_ctx_fini(ctx);
hl_asid_free(hdev, ctx->asid);
hl_encaps_sig_mgr_fini(hdev, &ctx->sig_mgr);
/* Scrub both SRAM and DRAM */
hdev->asic_funcs->scrub_device_mem(hdev, 0, 0);
@ -130,9 +185,6 @@ void hl_ctx_free(struct hl_device *hdev, struct hl_ctx *ctx)
{
if (kref_put(&ctx->refcount, hl_ctx_do_release) == 1)
return;
dev_warn(hdev->dev,
"user process released device but its command submissions are still executing\n");
}
int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
@ -144,11 +196,8 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
kref_init(&ctx->refcount);
ctx->cs_sequence = 1;
INIT_LIST_HEAD(&ctx->pending_cb_list);
spin_lock_init(&ctx->pending_cb_lock);
spin_lock_init(&ctx->cs_lock);
atomic_set(&ctx->thread_ctx_switch_token, 1);
atomic_set(&ctx->thread_pending_cb_token, 1);
ctx->thread_ctx_switch_wait_token = 0;
ctx->cs_pending = kcalloc(hdev->asic_prop.max_pending_cs,
sizeof(struct hl_fence *),
@ -200,6 +249,8 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
goto err_cb_va_pool_fini;
}
hl_encaps_sig_mgr_init(&ctx->sig_mgr);
dev_dbg(hdev->dev, "create user context %d\n", ctx->asid);
}
@ -229,31 +280,86 @@ int hl_ctx_put(struct hl_ctx *ctx)
return kref_put(&ctx->refcount, hl_ctx_do_release);
}
struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
/*
* hl_ctx_get_fence_locked - get CS fence under CS lock
*
* @ctx: pointer to the context structure.
* @seq: CS sequences number
*
* @return valid fence pointer on success, NULL if fence is gone, otherwise
* error pointer.
*
* NOTE: this function shall be called with cs_lock locked
*/
static struct hl_fence *hl_ctx_get_fence_locked(struct hl_ctx *ctx, u64 seq)
{
struct asic_fixed_properties *asic_prop = &ctx->hdev->asic_prop;
struct hl_fence *fence;
spin_lock(&ctx->cs_lock);
if (seq >= ctx->cs_sequence) {
spin_unlock(&ctx->cs_lock);
if (seq >= ctx->cs_sequence)
return ERR_PTR(-EINVAL);
}
if (seq + asic_prop->max_pending_cs < ctx->cs_sequence) {
spin_unlock(&ctx->cs_lock);
if (seq + asic_prop->max_pending_cs < ctx->cs_sequence)
return NULL;
}
fence = ctx->cs_pending[seq & (asic_prop->max_pending_cs - 1)];
hl_fence_get(fence);
return fence;
}
struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
{
struct hl_fence *fence;
spin_lock(&ctx->cs_lock);
fence = hl_ctx_get_fence_locked(ctx, seq);
spin_unlock(&ctx->cs_lock);
return fence;
}
/*
* hl_ctx_get_fences - get multiple CS fences under the same CS lock
*
* @ctx: pointer to the context structure.
* @seq_arr: array of CS sequences to wait for
* @fence: fence array to store the CS fences
* @arr_len: length of seq_arr and fence_arr
*
* @return 0 on success, otherwise non 0 error code
*/
int hl_ctx_get_fences(struct hl_ctx *ctx, u64 *seq_arr,
struct hl_fence **fence, u32 arr_len)
{
struct hl_fence **fence_arr_base = fence;
int i, rc = 0;
spin_lock(&ctx->cs_lock);
for (i = 0; i < arr_len; i++, fence++) {
u64 seq = seq_arr[i];
*fence = hl_ctx_get_fence_locked(ctx, seq);
if (IS_ERR(*fence)) {
dev_err(ctx->hdev->dev,
"Failed to get fence for CS with seq 0x%llx\n",
seq);
rc = PTR_ERR(*fence);
break;
}
}
spin_unlock(&ctx->cs_lock);
if (rc)
hl_fences_put(fence_arr_base, i);
return rc;
}
/*
* hl_ctx_mgr_init - initialize the context manager
*

View file

@ -209,12 +209,12 @@ static int userptr_show(struct seq_file *s, void *data)
if (first) {
first = false;
seq_puts(s, "\n");
seq_puts(s, " user virtual address size dma dir\n");
seq_puts(s, " pid user virtual address size dma dir\n");
seq_puts(s, "----------------------------------------------------------\n");
}
seq_printf(s,
" 0x%-14llx %-10u %-30s\n",
userptr->addr, userptr->size, dma_dir[userptr->dir]);
seq_printf(s, " %-7d 0x%-14llx %-10llu %-30s\n",
userptr->pid, userptr->addr, userptr->size,
dma_dir[userptr->dir]);
}
spin_unlock(&dev_entry->userptr_spinlock);
@ -235,7 +235,7 @@ static int vm_show(struct seq_file *s, void *data)
struct hl_vm_hash_node *hnode;
struct hl_userptr *userptr;
struct hl_vm_phys_pg_pack *phys_pg_pack = NULL;
enum vm_type_t *vm_type;
enum vm_type *vm_type;
bool once = true;
u64 j;
int i;
@ -261,7 +261,7 @@ static int vm_show(struct seq_file *s, void *data)
if (*vm_type == VM_TYPE_USERPTR) {
userptr = hnode->ptr;
seq_printf(s,
" 0x%-14llx %-10u\n",
" 0x%-14llx %-10llu\n",
hnode->vaddr, userptr->size);
} else {
phys_pg_pack = hnode->ptr;
@ -320,6 +320,77 @@ static int vm_show(struct seq_file *s, void *data)
return 0;
}
static int userptr_lookup_show(struct seq_file *s, void *data)
{
struct hl_debugfs_entry *entry = s->private;
struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
struct scatterlist *sg;
struct hl_userptr *userptr;
bool first = true;
u64 total_npages, npages, sg_start, sg_end;
dma_addr_t dma_addr;
int i;
spin_lock(&dev_entry->userptr_spinlock);
list_for_each_entry(userptr, &dev_entry->userptr_list, debugfs_list) {
if (dev_entry->userptr_lookup >= userptr->addr &&
dev_entry->userptr_lookup < userptr->addr + userptr->size) {
total_npages = 0;
for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents,
i) {
npages = hl_get_sg_info(sg, &dma_addr);
sg_start = userptr->addr +
total_npages * PAGE_SIZE;
sg_end = userptr->addr +
(total_npages + npages) * PAGE_SIZE;
if (dev_entry->userptr_lookup >= sg_start &&
dev_entry->userptr_lookup < sg_end) {
dma_addr += (dev_entry->userptr_lookup -
sg_start);
if (first) {
first = false;
seq_puts(s, "\n");
seq_puts(s, " user virtual address dma address pid region start region size\n");
seq_puts(s, "---------------------------------------------------------------------------------------\n");
}
seq_printf(s, " 0x%-18llx 0x%-16llx %-8u 0x%-16llx %-12llu\n",
dev_entry->userptr_lookup,
(u64)dma_addr, userptr->pid,
userptr->addr, userptr->size);
}
total_npages += npages;
}
}
}
spin_unlock(&dev_entry->userptr_spinlock);
if (!first)
seq_puts(s, "\n");
return 0;
}
static ssize_t userptr_lookup_write(struct file *file, const char __user *buf,
size_t count, loff_t *f_pos)
{
struct seq_file *s = file->private_data;
struct hl_debugfs_entry *entry = s->private;
struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
ssize_t rc;
u64 value;
rc = kstrtoull_from_user(buf, count, 16, &value);
if (rc)
return rc;
dev_entry->userptr_lookup = value;
return count;
}
static int mmu_show(struct seq_file *s, void *data)
{
struct hl_debugfs_entry *entry = s->private;
@ -349,7 +420,7 @@ static int mmu_show(struct seq_file *s, void *data)
return 0;
}
phys_addr = hops_info.hop_info[hops_info.used_hops - 1].hop_pte_val;
hl_mmu_va_to_pa(ctx, virt_addr, &phys_addr);
if (hops_info.scrambled_vaddr &&
(dev_entry->mmu_addr != hops_info.scrambled_vaddr))
@ -491,11 +562,10 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr, u32 size,
struct hl_vm_phys_pg_pack *phys_pg_pack;
struct hl_ctx *ctx = hdev->compute_ctx;
struct hl_vm_hash_node *hnode;
u64 end_address, range_size;
struct hl_userptr *userptr;
enum vm_type_t *vm_type;
enum vm_type *vm_type;
bool valid = false;
u64 end_address;
u32 range_size;
int i, rc = 0;
if (!ctx) {
@ -1043,6 +1113,60 @@ static ssize_t hl_security_violations_read(struct file *f, char __user *buf,
return 0;
}
static ssize_t hl_state_dump_read(struct file *f, char __user *buf,
size_t count, loff_t *ppos)
{
struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
ssize_t rc;
down_read(&entry->state_dump_sem);
if (!entry->state_dump[entry->state_dump_head])
rc = 0;
else
rc = simple_read_from_buffer(
buf, count, ppos,
entry->state_dump[entry->state_dump_head],
strlen(entry->state_dump[entry->state_dump_head]));
up_read(&entry->state_dump_sem);
return rc;
}
static ssize_t hl_state_dump_write(struct file *f, const char __user *buf,
size_t count, loff_t *ppos)
{
struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
struct hl_device *hdev = entry->hdev;
ssize_t rc;
u32 size;
int i;
rc = kstrtouint_from_user(buf, count, 10, &size);
if (rc)
return rc;
if (size <= 0 || size >= ARRAY_SIZE(entry->state_dump)) {
dev_err(hdev->dev, "Invalid number of dumps to skip\n");
return -EINVAL;
}
if (entry->state_dump[entry->state_dump_head]) {
down_write(&entry->state_dump_sem);
for (i = 0; i < size; ++i) {
vfree(entry->state_dump[entry->state_dump_head]);
entry->state_dump[entry->state_dump_head] = NULL;
if (entry->state_dump_head > 0)
entry->state_dump_head--;
else
entry->state_dump_head =
ARRAY_SIZE(entry->state_dump) - 1;
}
up_write(&entry->state_dump_sem);
}
return count;
}
static const struct file_operations hl_data32b_fops = {
.owner = THIS_MODULE,
.read = hl_data_read32,
@ -1110,12 +1234,19 @@ static const struct file_operations hl_security_violations_fops = {
.read = hl_security_violations_read
};
static const struct file_operations hl_state_dump_fops = {
.owner = THIS_MODULE,
.read = hl_state_dump_read,
.write = hl_state_dump_write
};
static const struct hl_info_list hl_debugfs_list[] = {
{"command_buffers", command_buffers_show, NULL},
{"command_submission", command_submission_show, NULL},
{"command_submission_jobs", command_submission_jobs_show, NULL},
{"userptr", userptr_show, NULL},
{"vm", vm_show, NULL},
{"userptr_lookup", userptr_lookup_show, userptr_lookup_write},
{"mmu", mmu_show, mmu_asid_va_write},
{"engines", engines_show, NULL}
};
@ -1172,6 +1303,7 @@ void hl_debugfs_add_device(struct hl_device *hdev)
INIT_LIST_HEAD(&dev_entry->userptr_list);
INIT_LIST_HEAD(&dev_entry->ctx_mem_hash_list);
mutex_init(&dev_entry->file_mutex);
init_rwsem(&dev_entry->state_dump_sem);
spin_lock_init(&dev_entry->cb_spinlock);
spin_lock_init(&dev_entry->cs_spinlock);
spin_lock_init(&dev_entry->cs_job_spinlock);
@ -1283,6 +1415,12 @@ void hl_debugfs_add_device(struct hl_device *hdev)
dev_entry->root,
&hdev->skip_reset_on_timeout);
debugfs_create_file("state_dump",
0600,
dev_entry->root,
dev_entry,
&hl_state_dump_fops);
for (i = 0, entry = dev_entry->entry_arr ; i < count ; i++, entry++) {
debugfs_create_file(hl_debugfs_list[i].name,
0444,
@ -1297,6 +1435,7 @@ void hl_debugfs_add_device(struct hl_device *hdev)
void hl_debugfs_remove_device(struct hl_device *hdev)
{
struct hl_dbg_device_entry *entry = &hdev->hl_debugfs;
int i;
debugfs_remove_recursive(entry->root);
@ -1304,6 +1443,9 @@ void hl_debugfs_remove_device(struct hl_device *hdev)
vfree(entry->blob_desc.data);
for (i = 0; i < ARRAY_SIZE(entry->state_dump); ++i)
vfree(entry->state_dump[i]);
kfree(entry->entry_arr);
}
@ -1416,6 +1558,28 @@ void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx)
spin_unlock(&dev_entry->ctx_mem_hash_spinlock);
}
/**
* hl_debugfs_set_state_dump - register state dump making it accessible via
* debugfs
* @hdev: pointer to the device structure
* @data: the actual dump data
* @length: the length of the data
*/
void hl_debugfs_set_state_dump(struct hl_device *hdev, char *data,
unsigned long length)
{
struct hl_dbg_device_entry *dev_entry = &hdev->hl_debugfs;
down_write(&dev_entry->state_dump_sem);
dev_entry->state_dump_head = (dev_entry->state_dump_head + 1) %
ARRAY_SIZE(dev_entry->state_dump);
vfree(dev_entry->state_dump[dev_entry->state_dump_head]);
dev_entry->state_dump[dev_entry->state_dump_head] = data;
up_write(&dev_entry->state_dump_sem);
}
void __init hl_debugfs_init(void)
{
hl_debug_root = debugfs_create_dir("habanalabs", NULL);

View file

@ -7,11 +7,11 @@
#define pr_fmt(fmt) "habanalabs: " fmt
#include <uapi/misc/habanalabs.h>
#include "habanalabs.h"
#include <linux/pci.h>
#include <linux/hwmon.h>
#include <uapi/misc/habanalabs.h>
enum hl_device_status hl_device_status(struct hl_device *hdev)
{
@ -23,6 +23,8 @@ enum hl_device_status hl_device_status(struct hl_device *hdev)
status = HL_DEVICE_STATUS_NEEDS_RESET;
else if (hdev->disabled)
status = HL_DEVICE_STATUS_MALFUNCTION;
else if (!hdev->init_done)
status = HL_DEVICE_STATUS_IN_DEVICE_CREATION;
else
status = HL_DEVICE_STATUS_OPERATIONAL;
@ -44,6 +46,7 @@ bool hl_device_operational(struct hl_device *hdev,
case HL_DEVICE_STATUS_NEEDS_RESET:
return false;
case HL_DEVICE_STATUS_OPERATIONAL:
case HL_DEVICE_STATUS_IN_DEVICE_CREATION:
default:
return true;
}
@ -129,8 +132,8 @@ static int hl_device_release(struct inode *inode, struct file *filp)
hl_ctx_mgr_fini(hdev, &hpriv->ctx_mgr);
if (!hl_hpriv_put(hpriv))
dev_warn(hdev->dev,
"Device is still in use because there are live CS and/or memory mappings\n");
dev_notice(hdev->dev,
"User process closed FD but device still in use\n");
hdev->last_open_session_duration_jif =
jiffies - hdev->last_successful_open_jif;
@ -308,9 +311,15 @@ static void device_hard_reset_pending(struct work_struct *work)
container_of(work, struct hl_device_reset_work,
reset_work.work);
struct hl_device *hdev = device_reset_work->hdev;
u32 flags;
int rc;
rc = hl_device_reset(hdev, HL_RESET_HARD | HL_RESET_FROM_RESET_THREAD);
flags = HL_RESET_HARD | HL_RESET_FROM_RESET_THREAD;
if (device_reset_work->fw_reset)
flags |= HL_RESET_FW;
rc = hl_device_reset(hdev, flags);
if ((rc == -EBUSY) && !hdev->device_fini_pending) {
dev_info(hdev->dev,
"Could not reset device. will try again in %u seconds",
@ -682,6 +691,44 @@ int hl_device_set_debug_mode(struct hl_device *hdev, bool enable)
return rc;
}
static void take_release_locks(struct hl_device *hdev)
{
/* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
/* Flush processes that are sending message to CPU */
mutex_lock(&hdev->send_cpu_message_lock);
mutex_unlock(&hdev->send_cpu_message_lock);
/* Flush anyone that is inside device open */
mutex_lock(&hdev->fpriv_list_lock);
mutex_unlock(&hdev->fpriv_list_lock);
}
static void cleanup_resources(struct hl_device *hdev, bool hard_reset, bool fw_reset)
{
if (hard_reset)
device_late_fini(hdev);
/*
* Halt the engines and disable interrupts so we won't get any more
* completions from H/W and we won't have any accesses from the
* H/W to the host machine
*/
hdev->asic_funcs->halt_engines(hdev, hard_reset, fw_reset);
/* Go over all the queues, release all CS and their jobs */
hl_cs_rollback_all(hdev);
/* Release all pending user interrupts, each pending user interrupt
* holds a reference to user context
*/
hl_release_pending_user_interrupts(hdev);
}
/*
* hl_device_suspend - initiate device suspend
*
@ -707,16 +754,7 @@ int hl_device_suspend(struct hl_device *hdev)
/* This blocks all other stuff that is not blocked by in_reset */
hdev->disabled = true;
/*
* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
/* Flush processes that are sending message to CPU */
mutex_lock(&hdev->send_cpu_message_lock);
mutex_unlock(&hdev->send_cpu_message_lock);
take_release_locks(hdev);
rc = hdev->asic_funcs->suspend(hdev);
if (rc)
@ -819,6 +857,11 @@ static int device_kill_open_processes(struct hl_device *hdev, u32 timeout)
usleep_range(1000, 10000);
put_task_struct(task);
} else {
dev_warn(hdev->dev,
"Can't get task struct for PID so giving up on killing process\n");
mutex_unlock(&hdev->fpriv_list_lock);
return -ETIME;
}
}
@ -885,7 +928,7 @@ static void device_disable_open_processes(struct hl_device *hdev)
int hl_device_reset(struct hl_device *hdev, u32 flags)
{
u64 idle_mask[HL_BUSY_ENGINES_MASK_EXT_SIZE] = {0};
bool hard_reset, from_hard_reset_thread, hard_instead_soft = false;
bool hard_reset, from_hard_reset_thread, fw_reset, hard_instead_soft = false;
int i, rc;
if (!hdev->init_done) {
@ -894,8 +937,9 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
return 0;
}
hard_reset = (flags & HL_RESET_HARD) != 0;
from_hard_reset_thread = (flags & HL_RESET_FROM_RESET_THREAD) != 0;
hard_reset = !!(flags & HL_RESET_HARD);
from_hard_reset_thread = !!(flags & HL_RESET_FROM_RESET_THREAD);
fw_reset = !!(flags & HL_RESET_FW);
if (!hard_reset && !hdev->supports_soft_reset) {
hard_instead_soft = true;
@ -947,11 +991,13 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
else
hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
/*
* if reset is due to heartbeat, device CPU is no responsive in
* which case no point sending PCI disable message to it
/* If reset is due to heartbeat, device CPU is no responsive in
* which case no point sending PCI disable message to it.
*
* If F/W is performing the reset, no need to send it a message to disable
* PCI access
*/
if (hard_reset && !(flags & HL_RESET_HEARTBEAT)) {
if (hard_reset && !(flags & (HL_RESET_HEARTBEAT | HL_RESET_FW))) {
/* Disable PCI access from device F/W so he won't send
* us additional interrupts. We disable MSI/MSI-X at
* the halt_engines function and we can't have the F/W
@ -970,15 +1016,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
/* This also blocks future CS/VM/JOB completion operations */
hdev->disabled = true;
/* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
/* Flush anyone that is inside device open */
mutex_lock(&hdev->fpriv_list_lock);
mutex_unlock(&hdev->fpriv_list_lock);
take_release_locks(hdev);
dev_err(hdev->dev, "Going to RESET device!\n");
}
@ -989,6 +1027,8 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
hdev->process_kill_trial_cnt = 0;
hdev->device_reset_work.fw_reset = fw_reset;
/*
* Because the reset function can't run from heartbeat work,
* we need to call the reset function from a dedicated work.
@ -999,31 +1039,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
return 0;
}
if (hard_reset) {
device_late_fini(hdev);
/*
* Now that the heartbeat thread is closed, flush processes
* which are sending messages to CPU
*/
mutex_lock(&hdev->send_cpu_message_lock);
mutex_unlock(&hdev->send_cpu_message_lock);
}
/*
* Halt the engines and disable interrupts so we won't get any more
* completions from H/W and we won't have any accesses from the
* H/W to the host machine
*/
hdev->asic_funcs->halt_engines(hdev, hard_reset);
/* Go over all the queues, release all CS and their jobs */
hl_cs_rollback_all(hdev);
/* Release all pending user interrupts, each pending user interrupt
* holds a reference to user context
*/
hl_release_pending_user_interrupts(hdev);
cleanup_resources(hdev, hard_reset, fw_reset);
kill_processes:
if (hard_reset) {
@ -1057,12 +1073,15 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
}
/* Reset the H/W. It will be in idle state after this returns */
hdev->asic_funcs->hw_fini(hdev, hard_reset);
hdev->asic_funcs->hw_fini(hdev, hard_reset, fw_reset);
if (hard_reset) {
hdev->fw_loader.linux_loaded = false;
/* Release kernel context */
if (hdev->kernel_ctx && hl_ctx_put(hdev->kernel_ctx) == 1)
hdev->kernel_ctx = NULL;
hl_vm_fini(hdev);
hl_mmu_fini(hdev);
hl_eq_reset(hdev, &hdev->event_queue);
@ -1292,6 +1311,10 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
if (rc)
goto user_interrupts_fini;
/* initialize completion structure for multi CS wait */
hl_multi_cs_completion_init(hdev);
/*
* Initialize the H/W queues. Must be done before hw_init, because
* there the addresses of the kernel queue are being written to the
@ -1361,6 +1384,8 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
hdev->compute_ctx = NULL;
hdev->asic_funcs->state_dump_init(hdev);
hl_debugfs_add_device(hdev);
/* debugfs nodes are created in hl_ctx_init so it must be called after
@ -1567,31 +1592,13 @@ void hl_device_fini(struct hl_device *hdev)
/* Mark device as disabled */
hdev->disabled = true;
/* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
/* Flush anyone that is inside device open */
mutex_lock(&hdev->fpriv_list_lock);
mutex_unlock(&hdev->fpriv_list_lock);
take_release_locks(hdev);
hdev->hard_reset_pending = true;
hl_hwmon_fini(hdev);
device_late_fini(hdev);
/*
* Halt the engines and disable interrupts so we won't get any more
* completions from H/W and we won't have any accesses from the
* H/W to the host machine
*/
hdev->asic_funcs->halt_engines(hdev, true);
/* Go over all the queues, release all CS and their jobs */
hl_cs_rollback_all(hdev);
cleanup_resources(hdev, true, false);
/* Kill processes here after CS rollback. This is because the process
* can't really exit until all its CSs are done, which is what we
@ -1610,7 +1617,9 @@ void hl_device_fini(struct hl_device *hdev)
hl_cb_pool_fini(hdev);
/* Reset the H/W. It will be in idle state after this returns */
hdev->asic_funcs->hw_fini(hdev, true);
hdev->asic_funcs->hw_fini(hdev, true, false);
hdev->fw_loader.linux_loaded = false;
/* Release kernel context */
if ((hdev->kernel_ctx) && (hl_ctx_put(hdev->kernel_ctx) != 1))

View file

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2016-2019 HabanaLabs, Ltd.
* Copyright 2016-2021 HabanaLabs, Ltd.
* All Rights Reserved.
*/
@ -240,11 +240,15 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
/* set fence to a non valid value */
pkt->fence = cpu_to_le32(UINT_MAX);
rc = hl_hw_queue_send_cb_no_cmpl(hdev, hw_queue_id, len, pkt_dma_addr);
if (rc) {
dev_err(hdev->dev, "Failed to send CB on CPU PQ (%d)\n", rc);
goto out;
}
/*
* The CPU queue is a synchronous queue with an effective depth of
* a single entry (although it is allocated with room for multiple
* entries). We lock on it using 'send_cpu_message_lock' which
* serializes accesses to the CPU queue.
* Which means that we don't need to lock the access to the entire H/W
* queues module when submitting a JOB to the CPU queue.
*/
hl_hw_queue_submit_bd(hdev, queue, 0, len, pkt_dma_addr);
if (prop->fw_app_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN)
expected_ack_val = queue->pi;
@ -663,17 +667,15 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
hdev->event_queue.check_eqe_index = false;
/* Read FW application security bits again */
if (hdev->asic_prop.fw_cpu_boot_dev_sts0_valid) {
hdev->asic_prop.fw_app_cpu_boot_dev_sts0 =
RREG32(sts_boot_dev_sts0_reg);
if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
if (prop->fw_cpu_boot_dev_sts0_valid) {
prop->fw_app_cpu_boot_dev_sts0 = RREG32(sts_boot_dev_sts0_reg);
if (prop->fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_EQ_INDEX_EN)
hdev->event_queue.check_eqe_index = true;
}
if (hdev->asic_prop.fw_cpu_boot_dev_sts1_valid)
hdev->asic_prop.fw_app_cpu_boot_dev_sts1 =
RREG32(sts_boot_dev_sts1_reg);
if (prop->fw_cpu_boot_dev_sts1_valid)
prop->fw_app_cpu_boot_dev_sts1 = RREG32(sts_boot_dev_sts1_reg);
out:
hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
@ -1008,6 +1010,11 @@ void hl_fw_ask_halt_machine_without_linux(struct hl_device *hdev)
} else {
WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_GOTO_WFE);
msleep(static_loader->cpu_reset_wait_msec);
/* Must clear this register in order to prevent preboot
* from reading WFE after reboot
*/
WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_NA);
}
hdev->device_cpu_is_halted = true;
@ -1055,6 +1062,10 @@ static void detect_cpu_boot_status(struct hl_device *hdev, u32 status)
dev_err(hdev->dev,
"Device boot progress - Thermal Sensor initialization failed\n");
break;
case CPU_BOOT_STATUS_SECURITY_READY:
dev_err(hdev->dev,
"Device boot progress - Stuck in preboot after security initialization\n");
break;
default:
dev_err(hdev->dev,
"Device boot progress - Invalid status code %d\n",
@ -1238,11 +1249,6 @@ static void hl_fw_preboot_update_state(struct hl_device *hdev)
* b. Check whether hard reset is done by boot cpu
* 3. FW application - a. Fetch fw application security status
* b. Check whether hard reset is done by fw app
*
* Preboot:
* Check security status bit (CPU_BOOT_DEV_STS0_ENABLED). If set, then-
* check security enabled bit (CPU_BOOT_DEV_STS0_SECURITY_EN)
* If set, then mark GIC controller to be disabled.
*/
prop->hard_reset_done_by_fw =
!!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN);
@ -1953,8 +1959,8 @@ static void hl_fw_dynamic_update_linux_interrupt_if(struct hl_device *hdev)
if (!hdev->asic_prop.gic_interrupts_enable &&
!(hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN)) {
dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_irq_ctrl;
dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_irq_ctrl;
dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_pi_upd_irq;
dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_pi_upd_irq;
dev_warn(hdev->dev,
"Using a single interrupt interface towards cpucp");
@ -2122,8 +2128,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,
/* Read FW application security bits */
if (prop->fw_cpu_boot_dev_sts0_valid) {
prop->fw_app_cpu_boot_dev_sts0 =
RREG32(cpu_boot_dev_sts0_reg);
prop->fw_app_cpu_boot_dev_sts0 = RREG32(cpu_boot_dev_sts0_reg);
if (prop->fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
@ -2143,8 +2148,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,
}
if (prop->fw_cpu_boot_dev_sts1_valid) {
prop->fw_app_cpu_boot_dev_sts1 =
RREG32(cpu_boot_dev_sts1_reg);
prop->fw_app_cpu_boot_dev_sts1 = RREG32(cpu_boot_dev_sts1_reg);
dev_dbg(hdev->dev,
"Firmware application CPU status1 %#x\n",
@ -2235,6 +2239,10 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
dev_info(hdev->dev,
"Loading firmware to device, may take some time...\n");
/*
* In this stage, "cpu_dyn_regs" contains only LKD's hard coded values!
* It will be updated from FW after hl_fw_dynamic_request_descriptor().
*/
dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_RST_STATE,

View file

@ -20,6 +20,7 @@
#include <linux/scatterlist.h>
#include <linux/hashtable.h>
#include <linux/debugfs.h>
#include <linux/rwsem.h>
#include <linux/bitfield.h>
#include <linux/genalloc.h>
#include <linux/sched/signal.h>
@ -65,6 +66,11 @@
#define HL_COMMON_USER_INTERRUPT_ID 0xFFF
#define HL_STATE_DUMP_HIST_LEN 5
#define OBJ_NAMES_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
#define SYNC_TO_ENGINE_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
/* Memory */
#define MEM_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
@ -122,12 +128,17 @@ enum hl_mmu_page_table_location {
*
* - HL_RESET_DEVICE_RELEASE
* Set if reset is due to device release
*
* - HL_RESET_FW
* F/W will perform the reset. No need to ask it to reset the device. This is relevant
* only when running with secured f/w
*/
#define HL_RESET_HARD (1 << 0)
#define HL_RESET_FROM_RESET_THREAD (1 << 1)
#define HL_RESET_HEARTBEAT (1 << 2)
#define HL_RESET_TDR (1 << 3)
#define HL_RESET_DEVICE_RELEASE (1 << 4)
#define HL_RESET_FW (1 << 5)
#define HL_MAX_SOBS_PER_MONITOR 8
@ -236,7 +247,9 @@ enum hl_cs_type {
CS_TYPE_DEFAULT,
CS_TYPE_SIGNAL,
CS_TYPE_WAIT,
CS_TYPE_COLLECTIVE_WAIT
CS_TYPE_COLLECTIVE_WAIT,
CS_RESERVE_SIGNALS,
CS_UNRESERVE_SIGNALS
};
/*
@ -281,13 +294,17 @@ enum queue_cb_alloc_flags {
* @hdev: habanalabs device structure.
* @kref: refcount of this SOB. The SOB will reset once the refcount is zero.
* @sob_id: id of this SOB.
* @sob_addr: the sob offset from the base address.
* @q_idx: the H/W queue that uses this SOB.
* @need_reset: reset indication set when switching to the other sob.
*/
struct hl_hw_sob {
struct hl_device *hdev;
struct kref kref;
u32 sob_id;
u32 sob_addr;
u32 q_idx;
bool need_reset;
};
enum hl_collective_mode {
@ -317,11 +334,11 @@ struct hw_queue_properties {
};
/**
* enum vm_type_t - virtual memory mapping request information.
* enum vm_type - virtual memory mapping request information.
* @VM_TYPE_USERPTR: mapping of user memory to device virtual address.
* @VM_TYPE_PHYS_PACK: mapping of DRAM memory to device virtual address.
*/
enum vm_type_t {
enum vm_type {
VM_TYPE_USERPTR = 0x1,
VM_TYPE_PHYS_PACK = 0x2
};
@ -381,6 +398,16 @@ struct hl_mmu_properties {
u8 host_resident;
};
/**
* struct hl_hints_range - hint addresses reserved va range.
* @start_addr: start address of the va range.
* @end_addr: end address of the va range.
*/
struct hl_hints_range {
u64 start_addr;
u64 end_addr;
};
/**
* struct asic_fixed_properties - ASIC specific immutable properties.
* @hw_queues_props: H/W queues properties.
@ -392,6 +419,10 @@ struct hl_mmu_properties {
* @pmmu: PCI (host) MMU address translation properties.
* @pmmu_huge: PCI (host) MMU address translation properties for memory
* allocated with huge pages.
* @hints_dram_reserved_va_range: dram hint addresses reserved range.
* @hints_host_reserved_va_range: host hint addresses reserved range.
* @hints_host_hpage_reserved_va_range: host huge page hint addresses reserved
* range.
* @sram_base_address: SRAM physical start address.
* @sram_end_address: SRAM physical end address.
* @sram_user_base_address - SRAM physical start address for user access.
@ -412,6 +443,10 @@ struct hl_mmu_properties {
* to the device's MMU.
* @cb_va_end_addr: virtual end address of command buffers which are mapped to
* the device's MMU.
* @dram_hints_align_mask: dram va hint addresses alignment mask which is used
* for hints validity check.
* device_dma_offset_for_host_access: the offset to add to host DMA addresses
* to enable the device to access them.
* @mmu_pgt_size: MMU page tables total size.
* @mmu_pte_size: PTE size in MMU page tables.
* @mmu_hop_table_size: MMU hop table size.
@ -459,6 +494,8 @@ struct hl_mmu_properties {
* reserved for the user
* @first_available_cq: first available CQ for the user.
* @user_interrupt_count: number of user interrupts.
* @server_type: Server type that the ASIC is currently installed in.
* The value is according to enum hl_server_type in uapi file.
* @tpc_enabled_mask: which TPCs are enabled.
* @completion_queues_count: number of completion queues.
* @fw_security_enabled: true if security measures are enabled in firmware,
@ -470,6 +507,7 @@ struct hl_mmu_properties {
* @dram_supports_virtual_memory: is there an MMU towards the DRAM
* @hard_reset_done_by_fw: true if firmware is handling hard reset flow
* @num_functional_hbms: number of functional HBMs in each DCORE.
* @hints_range_reservation: device support hint addresses range reservation.
* @iatu_done_by_fw: true if iATU configuration is being done by FW.
* @dynamic_fw_load: is dynamic FW load is supported.
* @gic_interrupts_enable: true if FW is not blocking GIC controller,
@ -483,6 +521,9 @@ struct asic_fixed_properties {
struct hl_mmu_properties dmmu;
struct hl_mmu_properties pmmu;
struct hl_mmu_properties pmmu_huge;
struct hl_hints_range hints_dram_reserved_va_range;
struct hl_hints_range hints_host_reserved_va_range;
struct hl_hints_range hints_host_hpage_reserved_va_range;
u64 sram_base_address;
u64 sram_end_address;
u64 sram_user_base_address;
@ -500,6 +541,8 @@ struct asic_fixed_properties {
u64 mmu_dram_default_page_addr;
u64 cb_va_start_addr;
u64 cb_va_end_addr;
u64 dram_hints_align_mask;
u64 device_dma_offset_for_host_access;
u32 mmu_pgt_size;
u32 mmu_pte_size;
u32 mmu_hop_table_size;
@ -534,6 +577,7 @@ struct asic_fixed_properties {
u16 first_available_user_msix_interrupt;
u16 first_available_cq[HL_MAX_DCORES];
u16 user_interrupt_count;
u16 server_type;
u8 tpc_enabled_mask;
u8 completion_queues_count;
u8 fw_security_enabled;
@ -542,6 +586,7 @@ struct asic_fixed_properties {
u8 dram_supports_virtual_memory;
u8 hard_reset_done_by_fw;
u8 num_functional_hbms;
u8 hints_range_reservation;
u8 iatu_done_by_fw;
u8 dynamic_fw_load;
u8 gic_interrupts_enable;
@ -552,40 +597,45 @@ struct asic_fixed_properties {
* @completion: fence is implemented using completion
* @refcount: refcount for this fence
* @cs_sequence: sequence of the corresponding command submission
* @stream_master_qid_map: streams masters QID bitmap to represent all streams
* masters QIDs that multi cs is waiting on
* @error: mark this fence with error
* @timestamp: timestamp upon completion
*
*/
struct hl_fence {
struct completion completion;
struct kref refcount;
u64 cs_sequence;
u32 stream_master_qid_map;
int error;
ktime_t timestamp;
};
/**
* struct hl_cs_compl - command submission completion object.
* @sob_reset_work: workqueue object to run SOB reset flow.
* @base_fence: hl fence object.
* @lock: spinlock to protect fence.
* @hdev: habanalabs device structure.
* @hw_sob: the H/W SOB used in this signal/wait CS.
* @encaps_sig_hdl: encaps signals hanlder.
* @cs_seq: command submission sequence number.
* @type: type of the CS - signal/wait.
* @sob_val: the SOB value that is used in this signal/wait CS.
* @sob_group: the SOB group that is used in this collective wait CS.
* @encaps_signals: indication whether it's a completion object of cs with
* encaps signals or not.
*/
struct hl_cs_compl {
struct work_struct sob_reset_work;
struct hl_fence base_fence;
spinlock_t lock;
struct hl_device *hdev;
struct hl_hw_sob *hw_sob;
struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
u64 cs_seq;
enum hl_cs_type type;
u16 sob_val;
u16 sob_group;
bool encaps_signals;
};
/*
@ -697,6 +747,17 @@ struct hl_sync_stream_properties {
u8 curr_sob_offset;
};
/**
* struct hl_encaps_signals_mgr - describes sync stream encapsulated signals
* handlers manager
* @lock: protects handles.
* @handles: an idr to hold all encapsulated signals handles.
*/
struct hl_encaps_signals_mgr {
spinlock_t lock;
struct idr handles;
};
/**
* struct hl_hw_queue - describes a H/W transport queue.
* @shadow_queue: pointer to a shadow queue that holds pointers to jobs.
@ -875,7 +936,7 @@ struct pci_mem_region {
u64 region_base;
u64 region_size;
u64 bar_size;
u32 offset_in_bar;
u64 offset_in_bar;
u8 bar_id;
u8 used;
};
@ -996,7 +1057,7 @@ struct fw_load_mgr {
* hw_fini and before CS rollback.
* @suspend: handles IP specific H/W or SW changes for suspend.
* @resume: handles IP specific H/W or SW changes for resume.
* @cb_mmap: maps a CB.
* @mmap: maps a memory.
* @ring_doorbell: increment PI on a given QMAN.
* @pqe_write: Write the PQ entry to the PQ. This is ASIC-specific
* function because the PQs are located in different memory areas
@ -1101,6 +1162,10 @@ struct fw_load_mgr {
* generic f/w compatible PLL Indexes
* @init_firmware_loader: initialize data for FW loader.
* @init_cpu_scrambler_dram: Enable CPU specific DRAM scrambling
* @state_dump_init: initialize constants required for state dump
* @get_sob_addr: get SOB base address offset.
* @set_pci_memory_regions: setting properties of PCI memory regions
* @get_stream_master_qid_arr: get pointer to stream masters QID array
*/
struct hl_asic_funcs {
int (*early_init)(struct hl_device *hdev);
@ -1110,11 +1175,11 @@ struct hl_asic_funcs {
int (*sw_init)(struct hl_device *hdev);
int (*sw_fini)(struct hl_device *hdev);
int (*hw_init)(struct hl_device *hdev);
void (*hw_fini)(struct hl_device *hdev, bool hard_reset);
void (*halt_engines)(struct hl_device *hdev, bool hard_reset);
void (*hw_fini)(struct hl_device *hdev, bool hard_reset, bool fw_reset);
void (*halt_engines)(struct hl_device *hdev, bool hard_reset, bool fw_reset);
int (*suspend)(struct hl_device *hdev);
int (*resume)(struct hl_device *hdev);
int (*cb_mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
int (*mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size);
void (*ring_doorbell)(struct hl_device *hdev, u32 hw_queue_id, u32 pi);
void (*pqe_write)(struct hl_device *hdev, __le64 *pqe,
@ -1210,10 +1275,11 @@ struct hl_asic_funcs {
void (*reset_sob_group)(struct hl_device *hdev, u16 sob_group);
void (*set_dma_mask_from_fw)(struct hl_device *hdev);
u64 (*get_device_time)(struct hl_device *hdev);
void (*collective_wait_init_cs)(struct hl_cs *cs);
int (*collective_wait_init_cs)(struct hl_cs *cs);
int (*collective_wait_create_jobs)(struct hl_device *hdev,
struct hl_ctx *ctx, struct hl_cs *cs, u32 wait_queue_id,
u32 collective_engine_id);
struct hl_ctx *ctx, struct hl_cs *cs,
u32 wait_queue_id, u32 collective_engine_id,
u32 encaps_signal_offset);
u64 (*scramble_addr)(struct hl_device *hdev, u64 addr);
u64 (*descramble_addr)(struct hl_device *hdev, u64 addr);
void (*ack_protection_bits_errors)(struct hl_device *hdev);
@ -1226,6 +1292,10 @@ struct hl_asic_funcs {
int (*map_pll_idx_to_fw_idx)(u32 pll_idx);
void (*init_firmware_loader)(struct hl_device *hdev);
void (*init_cpu_scrambler_dram)(struct hl_device *hdev);
void (*state_dump_init)(struct hl_device *hdev);
u32 (*get_sob_addr)(struct hl_device *hdev, u32 sob_id);
void (*set_pci_memory_regions)(struct hl_device *hdev);
u32* (*get_stream_master_qid_arr)(void);
};
@ -1282,20 +1352,6 @@ struct hl_cs_counters_atomic {
atomic64_t validation_drop_cnt;
};
/**
* struct hl_pending_cb - pending command buffer structure
* @cb_node: cb node in pending cb list
* @cb: command buffer to send in next submission
* @cb_size: command buffer size
* @hw_queue_id: destination queue id
*/
struct hl_pending_cb {
struct list_head cb_node;
struct hl_cb *cb;
u32 cb_size;
u32 hw_queue_id;
};
/**
* struct hl_ctx - user/kernel context.
* @mem_hash: holds mapping from virtual address to virtual memory area
@ -1312,28 +1368,21 @@ struct hl_pending_cb {
* MMU hash or walking the PGT requires talking this lock.
* @hw_block_list_lock: protects the HW block memory list.
* @debugfs_list: node in debugfs list of contexts.
* pending_cb_list: list of pending command buffers waiting to be sent upon
* next user command submission context.
* @hw_block_mem_list: list of HW block virtual mapped addresses.
* @cs_counters: context command submission counters.
* @cb_va_pool: device VA pool for command buffers which are mapped to the
* device's MMU.
* @sig_mgr: encaps signals handle manager.
* @cs_sequence: sequence number for CS. Value is assigned to a CS and passed
* to user so user could inquire about CS. It is used as
* index to cs_pending array.
* @dram_default_hops: array that holds all hops addresses needed for default
* DRAM mapping.
* @pending_cb_lock: spinlock to protect pending cb list
* @cs_lock: spinlock to protect cs_sequence.
* @dram_phys_mem: amount of used physical DRAM memory by this context.
* @thread_ctx_switch_token: token to prevent multiple threads of the same
* context from running the context switch phase.
* Only a single thread should run it.
* @thread_pending_cb_token: token to prevent multiple threads from processing
* the pending CB list. Only a single thread should
* process the list since it is protected by a
* spinlock and we don't want to halt the entire
* command submission sequence.
* @thread_ctx_switch_wait_token: token to prevent the threads that didn't run
* the context switch phase from moving to their
* execution phase before the context switch phase
@ -1353,17 +1402,15 @@ struct hl_ctx {
struct mutex mmu_lock;
struct mutex hw_block_list_lock;
struct list_head debugfs_list;
struct list_head pending_cb_list;
struct list_head hw_block_mem_list;
struct hl_cs_counters_atomic cs_counters;
struct gen_pool *cb_va_pool;
struct hl_encaps_signals_mgr sig_mgr;
u64 cs_sequence;
u64 *dram_default_hops;
spinlock_t pending_cb_lock;
spinlock_t cs_lock;
atomic64_t dram_phys_mem;
atomic_t thread_ctx_switch_token;
atomic_t thread_pending_cb_token;
u32 thread_ctx_switch_wait_token;
u32 asid;
u32 handle;
@ -1394,20 +1441,22 @@ struct hl_ctx_mgr {
* @sgt: pointer to the scatter-gather table that holds the pages.
* @dir: for DMA unmapping, the direction must be supplied, so save it.
* @debugfs_list: node in debugfs list of command submissions.
* @pid: the pid of the user process owning the memory
* @addr: user-space virtual address of the start of the memory area.
* @size: size of the memory area to pin & map.
* @dma_mapped: true if the SG was mapped to DMA addresses, false otherwise.
*/
struct hl_userptr {
enum vm_type_t vm_type; /* must be first */
enum vm_type vm_type; /* must be first */
struct list_head job_node;
struct page **pages;
unsigned int npages;
struct sg_table *sgt;
enum dma_data_direction dir;
struct list_head debugfs_list;
pid_t pid;
u64 addr;
u32 size;
u64 size;
u8 dma_mapped;
};
@ -1426,12 +1475,14 @@ struct hl_userptr {
* @mirror_node : node in device mirror list of command submissions.
* @staged_cs_node: node in the staged cs list.
* @debugfs_list: node in debugfs list of command submissions.
* @encaps_sig_hdl: holds the encaps signals handle.
* @sequence: the sequence number of this CS.
* @staged_sequence: the sequence of the staged submission this CS is part of,
* relevant only if staged_cs is set.
* @timeout_jiffies: cs timeout in jiffies.
* @submission_time_jiffies: submission time of the cs
* @type: CS_TYPE_*.
* @encaps_sig_hdl_id: encaps signals handle id, set for the first staged cs.
* @submitted: true if CS was submitted to H/W.
* @completed: true if CS was completed by device.
* @timedout : true if CS was timedout.
@ -1445,6 +1496,7 @@ struct hl_userptr {
* @staged_cs: true if this CS is part of a staged submission.
* @skip_reset_on_timeout: true if we shall not reset the device in case
* timeout occurs (debug scenario).
* @encaps_signals: true if this CS has encaps reserved signals.
*/
struct hl_cs {
u16 *jobs_in_queue_cnt;
@ -1459,11 +1511,13 @@ struct hl_cs {
struct list_head mirror_node;
struct list_head staged_cs_node;
struct list_head debugfs_list;
struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
u64 sequence;
u64 staged_sequence;
u64 timeout_jiffies;
u64 submission_time_jiffies;
enum hl_cs_type type;
u32 encaps_sig_hdl_id;
u8 submitted;
u8 completed;
u8 timedout;
@ -1474,6 +1528,7 @@ struct hl_cs {
u8 staged_first;
u8 staged_cs;
u8 skip_reset_on_timeout;
u8 encaps_signals;
};
/**
@ -1493,6 +1548,8 @@ struct hl_cs {
* @hw_queue_id: the id of the H/W queue this job is submitted to.
* @user_cb_size: the actual size of the CB we got from the user.
* @job_cb_size: the actual size of the CB that we put on the queue.
* @encaps_sig_wait_offset: encapsulated signals offset, which allow user
* to wait on part of the reserved signals.
* @is_kernel_allocated_cb: true if the CB handle we got from the user holds a
* handle to a kernel-allocated CB object, false
* otherwise (SRAM/DRAM/host address).
@ -1517,6 +1574,7 @@ struct hl_cs_job {
u32 hw_queue_id;
u32 user_cb_size;
u32 job_cb_size;
u32 encaps_sig_wait_offset;
u8 is_kernel_allocated_cb;
u8 contains_dma_pkt;
};
@ -1613,7 +1671,7 @@ struct hl_vm_hw_block_list_node {
* @created_from_userptr: is product of host virtual address.
*/
struct hl_vm_phys_pg_pack {
enum vm_type_t vm_type; /* must be first */
enum vm_type vm_type; /* must be first */
u64 *pages;
u64 npages;
u64 total_size;
@ -1759,9 +1817,13 @@ struct hl_debugfs_entry {
* @ctx_mem_hash_list: list of available contexts with MMU mappings.
* @ctx_mem_hash_spinlock: protects cb_list.
* @blob_desc: descriptor of blob
* @state_dump: data of the system states in case of a bad cs.
* @state_dump_sem: protects state_dump.
* @addr: next address to read/write from/to in read/write32.
* @mmu_addr: next virtual address to translate to physical address in mmu_show.
* @userptr_lookup: the target user ptr to look up for on demand.
* @mmu_asid: ASID to use while translating in mmu_show.
* @state_dump_head: index of the latest state dump
* @i2c_bus: generic u8 debugfs file for bus value to use in i2c_data_read.
* @i2c_addr: generic u8 debugfs file for address value to use in i2c_data_read.
* @i2c_reg: generic u8 debugfs file for register value to use in i2c_data_read.
@ -1783,14 +1845,149 @@ struct hl_dbg_device_entry {
struct list_head ctx_mem_hash_list;
spinlock_t ctx_mem_hash_spinlock;
struct debugfs_blob_wrapper blob_desc;
char *state_dump[HL_STATE_DUMP_HIST_LEN];
struct rw_semaphore state_dump_sem;
u64 addr;
u64 mmu_addr;
u64 userptr_lookup;
u32 mmu_asid;
u32 state_dump_head;
u8 i2c_bus;
u8 i2c_addr;
u8 i2c_reg;
};
/**
* struct hl_hw_obj_name_entry - single hw object name, member of
* hl_state_dump_specs
* @node: link to the containing hash table
* @name: hw object name
* @id: object identifier
*/
struct hl_hw_obj_name_entry {
struct hlist_node node;
const char *name;
u32 id;
};
enum hl_state_dump_specs_props {
SP_SYNC_OBJ_BASE_ADDR,
SP_NEXT_SYNC_OBJ_ADDR,
SP_SYNC_OBJ_AMOUNT,
SP_MON_OBJ_WR_ADDR_LOW,
SP_MON_OBJ_WR_ADDR_HIGH,
SP_MON_OBJ_WR_DATA,
SP_MON_OBJ_ARM_DATA,
SP_MON_OBJ_STATUS,
SP_MONITORS_AMOUNT,
SP_TPC0_CMDQ,
SP_TPC0_CFG_SO,
SP_NEXT_TPC,
SP_MME_CMDQ,
SP_MME_CFG_SO,
SP_NEXT_MME,
SP_DMA_CMDQ,
SP_DMA_CFG_SO,
SP_DMA_QUEUES_OFFSET,
SP_NUM_OF_MME_ENGINES,
SP_SUB_MME_ENG_NUM,
SP_NUM_OF_DMA_ENGINES,
SP_NUM_OF_TPC_ENGINES,
SP_ENGINE_NUM_OF_QUEUES,
SP_ENGINE_NUM_OF_STREAMS,
SP_ENGINE_NUM_OF_FENCES,
SP_FENCE0_CNT_OFFSET,
SP_FENCE0_RDATA_OFFSET,
SP_CP_STS_OFFSET,
SP_NUM_CORES,
SP_MAX
};
enum hl_sync_engine_type {
ENGINE_TPC,
ENGINE_DMA,
ENGINE_MME,
};
/**
* struct hl_mon_state_dump - represents a state dump of a single monitor
* @id: monitor id
* @wr_addr_low: address monitor will write to, low bits
* @wr_addr_high: address monitor will write to, high bits
* @wr_data: data monitor will write
* @arm_data: register value containing monitor configuration
* @status: monitor status
*/
struct hl_mon_state_dump {
u32 id;
u32 wr_addr_low;
u32 wr_addr_high;
u32 wr_data;
u32 arm_data;
u32 status;
};
/**
* struct hl_sync_to_engine_map_entry - sync object id to engine mapping entry
* @engine_type: type of the engine
* @engine_id: id of the engine
* @sync_id: id of the sync object
*/
struct hl_sync_to_engine_map_entry {
struct hlist_node node;
enum hl_sync_engine_type engine_type;
u32 engine_id;
u32 sync_id;
};
/**
* struct hl_sync_to_engine_map - maps sync object id to associated engine id
* @tb: hash table containing the mapping, each element is of type
* struct hl_sync_to_engine_map_entry
*/
struct hl_sync_to_engine_map {
DECLARE_HASHTABLE(tb, SYNC_TO_ENGINE_HASH_TABLE_BITS);
};
/**
* struct hl_state_dump_specs_funcs - virtual functions used by the state dump
* @gen_sync_to_engine_map: generate a hash map from sync obj id to its engine
* @print_single_monitor: format monitor data as string
* @monitor_valid: return true if given monitor dump is valid
* @print_fences_single_engine: format fences data as string
*/
struct hl_state_dump_specs_funcs {
int (*gen_sync_to_engine_map)(struct hl_device *hdev,
struct hl_sync_to_engine_map *map);
int (*print_single_monitor)(char **buf, size_t *size, size_t *offset,
struct hl_device *hdev,
struct hl_mon_state_dump *mon);
int (*monitor_valid)(struct hl_mon_state_dump *mon);
int (*print_fences_single_engine)(struct hl_device *hdev,
u64 base_offset,
u64 status_base_offset,
enum hl_sync_engine_type engine_type,
u32 engine_id, char **buf,
size_t *size, size_t *offset);
};
/**
* struct hl_state_dump_specs - defines ASIC known hw objects names
* @so_id_to_str_tb: sync objects names index table
* @monitor_id_to_str_tb: monitors names index table
* @funcs: virtual functions used for state dump
* @sync_namager_names: readable names for sync manager if available (ex: N_E)
* @props: pointer to a per asic const props array required for state dump
*/
struct hl_state_dump_specs {
DECLARE_HASHTABLE(so_id_to_str_tb, OBJ_NAMES_HASH_TABLE_BITS);
DECLARE_HASHTABLE(monitor_id_to_str_tb, OBJ_NAMES_HASH_TABLE_BITS);
struct hl_state_dump_specs_funcs funcs;
const char * const *sync_namager_names;
s64 *props;
};
/*
* DEVICES
@ -1798,7 +1995,7 @@ struct hl_dbg_device_entry {
#define HL_STR_MAX 32
#define HL_DEV_STS_MAX (HL_DEVICE_STATUS_NEEDS_RESET + 1)
#define HL_DEV_STS_MAX (HL_DEVICE_STATUS_LAST + 1)
/* Theoretical limit only. A single host can only contain up to 4 or 8 PCIe
* x16 cards. In extreme cases, there are hosts that can accommodate 16 cards.
@ -1946,11 +2143,13 @@ struct hwmon_chip_info;
* @wq: work queue for device reset procedure.
* @reset_work: reset work to be done.
* @hdev: habanalabs device structure.
* @fw_reset: whether f/w will do the reset without us sending them a message to do it.
*/
struct hl_device_reset_work {
struct workqueue_struct *wq;
struct delayed_work reset_work;
struct hl_device *hdev;
bool fw_reset;
};
/**
@ -2064,6 +2263,58 @@ struct hl_mmu_funcs {
u64 virt_addr, struct hl_mmu_hop_info *hops);
};
/**
* number of user contexts allowed to call wait_for_multi_cs ioctl in
* parallel
*/
#define MULTI_CS_MAX_USER_CTX 2
/**
* struct multi_cs_completion - multi CS wait completion.
* @completion: completion of any of the CS in the list
* @lock: spinlock for the completion structure
* @timestamp: timestamp for the multi-CS completion
* @stream_master_qid_map: bitmap of all stream masters on which the multi-CS
* is waiting
* @used: 1 if in use, otherwise 0
*/
struct multi_cs_completion {
struct completion completion;
spinlock_t lock;
s64 timestamp;
u32 stream_master_qid_map;
u8 used;
};
/**
* struct multi_cs_data - internal data for multi CS call
* @ctx: pointer to the context structure
* @fence_arr: array of fences of all CSs
* @seq_arr: array of CS sequence numbers
* @timeout_us: timeout in usec for waiting for CS to complete
* @timestamp: timestamp of first completed CS
* @wait_status: wait for CS status
* @completion_bitmap: bitmap of completed CSs (1- completed, otherwise 0)
* @stream_master_qid_map: bitmap of all stream master QIDs on which the
* multi-CS is waiting
* @arr_len: fence_arr and seq_arr array length
* @gone_cs: indication of gone CS (1- there was gone CS, otherwise 0)
* @update_ts: update timestamp. 1- update the timestamp, otherwise 0.
*/
struct multi_cs_data {
struct hl_ctx *ctx;
struct hl_fence **fence_arr;
u64 *seq_arr;
s64 timeout_us;
s64 timestamp;
long wait_status;
u32 completion_bitmap;
u32 stream_master_qid_map;
u8 arr_len;
u8 gone_cs;
u8 update_ts;
};
/**
* struct hl_device - habanalabs device structure.
* @pdev: pointer to PCI device, can be NULL in case of simulator device.
@ -2129,6 +2380,8 @@ struct hl_mmu_funcs {
* @mmu_func: device-related MMU functions.
* @fw_loader: FW loader manager.
* @pci_mem_region: array of memory regions in the PCI
* @state_dump_specs: constants and dictionaries needed to dump system state.
* @multi_cs_completion: array of multi-CS completion.
* @dram_used_mem: current DRAM memory consumption.
* @timeout_jiffies: device CS timeout value.
* @max_power: the max power of the device, as configured by the sysadmin. This
@ -2205,6 +2458,7 @@ struct hl_mmu_funcs {
* halted. We can't halt it again because the COMMS
* protocol will throw an error. Relevant only for
* cases where Linux was not loaded to device CPU
* @supports_wait_for_multi_cs: true if wait for multi CS is supported
*/
struct hl_device {
struct pci_dev *pdev;
@ -2273,6 +2527,11 @@ struct hl_device {
struct pci_mem_region pci_mem_region[PCI_REGION_NUMBER];
struct hl_state_dump_specs state_dump_specs;
struct multi_cs_completion multi_cs_completion[
MULTI_CS_MAX_USER_CTX];
u32 *stream_master_qid_arr;
atomic64_t dram_used_mem;
u64 timeout_jiffies;
u64 max_power;
@ -2322,6 +2581,8 @@ struct hl_device {
u8 curr_reset_cause;
u8 skip_reset_on_timeout;
u8 device_cpu_is_halted;
u8 supports_wait_for_multi_cs;
u8 stream_master_qid_arr_size;
/* Parameters for bring-up */
u64 nic_ports_mask;
@ -2343,6 +2604,29 @@ struct hl_device {
};
/**
* struct hl_cs_encaps_sig_handle - encapsulated signals handle structure
* @refcount: refcount used to protect removing this id when several
* wait cs are used to wait of the reserved encaps signals.
* @hdev: pointer to habanalabs device structure.
* @hw_sob: pointer to H/W SOB used in the reservation.
* @cs_seq: staged cs sequence which contains encapsulated signals
* @id: idr handler id to be used to fetch the handler info
* @q_idx: stream queue index
* @pre_sob_val: current SOB value before reservation
* @count: signals number
*/
struct hl_cs_encaps_sig_handle {
struct kref refcount;
struct hl_device *hdev;
struct hl_hw_sob *hw_sob;
u64 cs_seq;
u32 id;
u32 q_idx;
u32 pre_sob_val;
u32 count;
};
/*
* IOCTLs
*/
@ -2372,6 +2656,23 @@ struct hl_ioctl_desc {
* Kernel module functions that can be accessed by entire module
*/
/**
* hl_get_sg_info() - get number of pages and the DMA address from SG list.
* @sg: the SG list.
* @dma_addr: pointer to DMA address to return.
*
* Calculate the number of consecutive pages described by the SG list. Take the
* offset of the address in the first page, add to it the length and round it up
* to the number of needed pages.
*/
static inline u32 hl_get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
{
*dma_addr = sg_dma_address(sg);
return ((((*dma_addr) & (PAGE_SIZE - 1)) + sg_dma_len(sg)) +
(PAGE_SIZE - 1)) >> PAGE_SHIFT;
}
/**
* hl_mem_area_inside_range() - Checks whether address+size are inside a range.
* @address: The start address of the area we want to validate.
@ -2436,7 +2737,9 @@ void destroy_hdev(struct hl_device *hdev);
int hl_hw_queues_create(struct hl_device *hdev);
void hl_hw_queues_destroy(struct hl_device *hdev);
int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
u32 cb_size, u64 cb_ptr);
u32 cb_size, u64 cb_ptr);
void hl_hw_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q,
u32 ctl, u32 len, u64 ptr);
int hl_hw_queue_schedule_cs(struct hl_cs *cs);
u32 hl_hw_queue_add_ptr(u32 ptr, u16 val);
void hl_hw_queue_inc_ci_kernel(struct hl_device *hdev, u32 hw_queue_id);
@ -2470,6 +2773,8 @@ void hl_ctx_do_release(struct kref *ref);
void hl_ctx_get(struct hl_device *hdev, struct hl_ctx *ctx);
int hl_ctx_put(struct hl_ctx *ctx);
struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq);
int hl_ctx_get_fences(struct hl_ctx *ctx, u64 *seq_arr,
struct hl_fence **fence, u32 arr_len);
void hl_ctx_mgr_init(struct hl_ctx_mgr *mgr);
void hl_ctx_mgr_fini(struct hl_device *hdev, struct hl_ctx_mgr *mgr);
@ -2511,18 +2816,19 @@ int hl_cb_va_pool_init(struct hl_ctx *ctx);
void hl_cb_va_pool_fini(struct hl_ctx *ctx);
void hl_cs_rollback_all(struct hl_device *hdev);
void hl_pending_cb_list_flush(struct hl_ctx *ctx);
struct hl_cs_job *hl_cs_allocate_job(struct hl_device *hdev,
enum hl_queue_type queue_type, bool is_kernel_allocated_cb);
void hl_sob_reset_error(struct kref *ref);
int hl_gen_sob_mask(u16 sob_base, u8 sob_mask, u8 *mask);
void hl_fence_put(struct hl_fence *fence);
void hl_fences_put(struct hl_fence **fence, int len);
void hl_fence_get(struct hl_fence *fence);
void cs_get(struct hl_cs *cs);
bool cs_needs_completion(struct hl_cs *cs);
bool cs_needs_timeout(struct hl_cs *cs);
bool is_staged_cs_last_exists(struct hl_device *hdev, struct hl_cs *cs);
struct hl_cs *hl_staged_cs_find_first(struct hl_device *hdev, u64 cs_seq);
void hl_multi_cs_completion_init(struct hl_device *hdev);
void goya_set_asic_funcs(struct hl_device *hdev);
void gaudi_set_asic_funcs(struct hl_device *hdev);
@ -2650,9 +2956,25 @@ int hl_set_voltage(struct hl_device *hdev,
int sensor_index, u32 attr, long value);
int hl_set_current(struct hl_device *hdev,
int sensor_index, u32 attr, long value);
void hw_sob_get(struct hl_hw_sob *hw_sob);
void hw_sob_put(struct hl_hw_sob *hw_sob);
void hl_encaps_handle_do_release(struct kref *ref);
void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev,
struct hl_cs *cs, struct hl_cs_job *job,
struct hl_cs_compl *cs_cmpl);
void hl_release_pending_user_interrupts(struct hl_device *hdev);
int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
struct hl_hw_sob **hw_sob, u32 count);
struct hl_hw_sob **hw_sob, u32 count, bool encaps_sig);
int hl_state_dump(struct hl_device *hdev);
const char *hl_state_dump_get_sync_name(struct hl_device *hdev, u32 sync_id);
const char *hl_state_dump_get_monitor_name(struct hl_device *hdev,
struct hl_mon_state_dump *mon);
void hl_state_dump_free_sync_to_engine_map(struct hl_sync_to_engine_map *map);
__printf(4, 5) int hl_snprintf_resize(char **buf, size_t *size, size_t *offset,
const char *format, ...);
char *hl_format_as_binary(char *buf, size_t buf_len, u32 n);
const char *hl_sync_engine_to_string(enum hl_sync_engine_type engine_type);
#ifdef CONFIG_DEBUG_FS
@ -2673,6 +2995,8 @@ void hl_debugfs_remove_userptr(struct hl_device *hdev,
struct hl_userptr *userptr);
void hl_debugfs_add_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx);
void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx);
void hl_debugfs_set_state_dump(struct hl_device *hdev, char *data,
unsigned long length);
#else
@ -2746,6 +3070,11 @@ static inline void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev,
{
}
static inline void hl_debugfs_set_state_dump(struct hl_device *hdev,
char *data, unsigned long length)
{
}
#endif
/* IOCTLs */

View file

@ -141,7 +141,7 @@ int hl_device_open(struct inode *inode, struct file *filp)
hl_cb_mgr_init(&hpriv->cb_mgr);
hl_ctx_mgr_init(&hpriv->ctx_mgr);
hpriv->taskpid = find_get_pid(current->pid);
hpriv->taskpid = get_task_pid(current, PIDTYPE_PID);
mutex_lock(&hdev->fpriv_list_lock);
@ -194,7 +194,6 @@ int hl_device_open(struct inode *inode, struct file *filp)
out_err:
mutex_unlock(&hdev->fpriv_list_lock);
hl_cb_mgr_fini(hpriv->hdev, &hpriv->cb_mgr);
hl_ctx_mgr_fini(hpriv->hdev, &hpriv->ctx_mgr);
filp->private_data = NULL;
@ -318,12 +317,16 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
hdev->asic_prop.fw_security_enabled = false;
/* Assign status description string */
strncpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION],
"disabled", HL_STR_MAX);
strncpy(hdev->status[HL_DEVICE_STATUS_OPERATIONAL],
"operational", HL_STR_MAX);
strncpy(hdev->status[HL_DEVICE_STATUS_IN_RESET],
"in reset", HL_STR_MAX);
strncpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION],
"disabled", HL_STR_MAX);
strncpy(hdev->status[HL_DEVICE_STATUS_NEEDS_RESET],
"needs reset", HL_STR_MAX);
strncpy(hdev->status[HL_DEVICE_STATUS_IN_DEVICE_CREATION],
"in device creation", HL_STR_MAX);
hdev->major = hl_major;
hdev->reset_on_lockup = reset_on_lockup;
@ -532,7 +535,7 @@ hl_pci_err_detected(struct pci_dev *pdev, pci_channel_state_t state)
result = PCI_ERS_RESULT_NONE;
}
hdev->asic_funcs->halt_engines(hdev, true);
hdev->asic_funcs->halt_engines(hdev, true, false);
return result;
}

View file

@ -94,6 +94,8 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
hw_ip.first_available_interrupt_id =
prop->first_available_user_msix_interrupt;
hw_ip.server_type = prop->server_type;
return copy_to_user(out, &hw_ip,
min((size_t) size, sizeof(hw_ip))) ? -EFAULT : 0;
}

View file

@ -65,7 +65,7 @@ void hl_hw_queue_update_ci(struct hl_cs *cs)
}
/*
* ext_and_hw_queue_submit_bd() - Submit a buffer descriptor to an external or a
* hl_hw_queue_submit_bd() - Submit a buffer descriptor to an external or a
* H/W queue.
* @hdev: pointer to habanalabs device structure
* @q: pointer to habanalabs queue structure
@ -80,8 +80,8 @@ void hl_hw_queue_update_ci(struct hl_cs *cs)
* This function must be called when the scheduler mutex is taken
*
*/
static void ext_and_hw_queue_submit_bd(struct hl_device *hdev,
struct hl_hw_queue *q, u32 ctl, u32 len, u64 ptr)
void hl_hw_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q,
u32 ctl, u32 len, u64 ptr)
{
struct hl_bd *bd;
@ -222,8 +222,8 @@ static int hw_queue_sanity_checks(struct hl_device *hdev, struct hl_hw_queue *q,
* @cb_size: size of CB
* @cb_ptr: pointer to CB location
*
* This function sends a single CB, that must NOT generate a completion entry
*
* This function sends a single CB, that must NOT generate a completion entry.
* Sending CPU messages can be done instead via 'hl_hw_queue_submit_bd()'
*/
int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
u32 cb_size, u64 cb_ptr)
@ -231,16 +231,7 @@ int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id];
int rc = 0;
/*
* The CPU queue is a synchronous queue with an effective depth of
* a single entry (although it is allocated with room for multiple
* entries). Therefore, there is a different lock, called
* send_cpu_message_lock, that serializes accesses to the CPU queue.
* As a result, we don't need to lock the access to the entire H/W
* queues module when submitting a JOB to the CPU queue
*/
if (q->queue_type != QUEUE_TYPE_CPU)
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_lock(hdev);
if (hdev->disabled) {
rc = -EPERM;
@ -258,11 +249,10 @@ int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
goto out;
}
ext_and_hw_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr);
hl_hw_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr);
out:
if (q->queue_type != QUEUE_TYPE_CPU)
hdev->asic_funcs->hw_queues_unlock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
return rc;
}
@ -328,7 +318,7 @@ static void ext_queue_schedule_job(struct hl_cs_job *job)
cq->pi = hl_cq_inc_ptr(cq->pi);
submit_bd:
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
hl_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
/*
@ -407,7 +397,7 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
else
ptr = (u64) (uintptr_t) job->user_cb;
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
hl_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
static int init_signal_cs(struct hl_device *hdev,
@ -426,8 +416,9 @@ static int init_signal_cs(struct hl_device *hdev,
cs_cmpl->sob_val = prop->next_sob_val;
dev_dbg(hdev->dev,
"generate signal CB, sob_id: %d, sob val: 0x%x, q_idx: %d\n",
cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val, q_idx);
"generate signal CB, sob_id: %d, sob val: %u, q_idx: %d, seq: %llu\n",
cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val, q_idx,
cs_cmpl->cs_seq);
/* we set an EB since we must make sure all oeprations are done
* when sending the signal
@ -435,17 +426,37 @@ static int init_signal_cs(struct hl_device *hdev,
hdev->asic_funcs->gen_signal_cb(hdev, job->patched_cb,
cs_cmpl->hw_sob->sob_id, 0, true);
rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, 1);
rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, 1,
false);
return rc;
}
static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev,
struct hl_cs *cs, struct hl_cs_job *job,
struct hl_cs_compl *cs_cmpl)
{
struct hl_cs_encaps_sig_handle *handle = cs->encaps_sig_hdl;
cs_cmpl->hw_sob = handle->hw_sob;
/* Note that encaps_sig_wait_offset was validated earlier in the flow
* for offset value which exceeds the max reserved signal count.
* always decrement 1 of the offset since when the user
* set offset 1 for example he mean to wait only for the first
* signal only, which will be pre_sob_val, and if he set offset 2
* then the value required is (pre_sob_val + 1) and so on...
*/
cs_cmpl->sob_val = handle->pre_sob_val +
(job->encaps_sig_wait_offset - 1);
}
static int init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
struct hl_cs_job *job, struct hl_cs_compl *cs_cmpl)
{
struct hl_cs_compl *signal_cs_cmpl;
struct hl_sync_stream_properties *prop;
struct hl_gen_wait_properties wait_prop;
struct hl_sync_stream_properties *prop;
struct hl_cs_compl *signal_cs_cmpl;
u32 q_idx;
q_idx = job->hw_queue_id;
@ -455,14 +466,51 @@ static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
struct hl_cs_compl,
base_fence);
/* copy the SOB id and value of the signal CS */
cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
if (cs->encaps_signals) {
/* use the encaps signal handle stored earlier in the flow
* and set the SOB information from the encaps
* signals handle
*/
hl_hw_queue_encaps_sig_set_sob_info(hdev, cs, job, cs_cmpl);
dev_dbg(hdev->dev, "Wait for encaps signals handle, qidx(%u), CS sequence(%llu), sob val: 0x%x, offset: %u\n",
cs->encaps_sig_hdl->q_idx,
cs->encaps_sig_hdl->cs_seq,
cs_cmpl->sob_val,
job->encaps_sig_wait_offset);
} else {
/* Copy the SOB id and value of the signal CS */
cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
}
/* check again if the signal cs already completed.
* if yes then don't send any wait cs since the hw_sob
* could be in reset already. if signal is not completed
* then get refcount to hw_sob to prevent resetting the sob
* while wait cs is not submitted.
* note that this check is protected by two locks,
* hw queue lock and completion object lock,
* and the same completion object lock also protects
* the hw_sob reset handler function.
* The hw_queue lock prevent out of sync of hw_sob
* refcount value, changed by signal/wait flows.
*/
spin_lock(&signal_cs_cmpl->lock);
if (completion_done(&cs->signal_fence->completion)) {
spin_unlock(&signal_cs_cmpl->lock);
return -EINVAL;
}
kref_get(&cs_cmpl->hw_sob->kref);
spin_unlock(&signal_cs_cmpl->lock);
dev_dbg(hdev->dev,
"generate wait CB, sob_id: %d, sob_val: 0x%x, mon_id: %d, q_idx: %d\n",
"generate wait CB, sob_id: %d, sob_val: 0x%x, mon_id: %d, q_idx: %d, seq: %llu\n",
cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val,
prop->base_mon_id, q_idx);
prop->base_mon_id, q_idx, cs->sequence);
wait_prop.data = (void *) job->patched_cb;
wait_prop.sob_base = cs_cmpl->hw_sob->sob_id;
@ -471,17 +519,14 @@ static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
wait_prop.mon_id = prop->base_mon_id;
wait_prop.q_idx = q_idx;
wait_prop.size = 0;
hdev->asic_funcs->gen_wait_cb(hdev, &wait_prop);
kref_get(&cs_cmpl->hw_sob->kref);
/*
* Must put the signal fence after the SOB refcnt increment so
* the SOB refcnt won't turn 0 and reset the SOB before the
* wait CS was submitted.
*/
mb();
hl_fence_put(cs->signal_fence);
cs->signal_fence = NULL;
return 0;
}
/*
@ -506,7 +551,60 @@ static int init_signal_wait_cs(struct hl_cs *cs)
if (cs->type & CS_TYPE_SIGNAL)
rc = init_signal_cs(hdev, job, cs_cmpl);
else if (cs->type & CS_TYPE_WAIT)
init_wait_cs(hdev, cs, job, cs_cmpl);
rc = init_wait_cs(hdev, cs, job, cs_cmpl);
return rc;
}
static int encaps_sig_first_staged_cs_handler
(struct hl_device *hdev, struct hl_cs *cs)
{
struct hl_cs_compl *cs_cmpl =
container_of(cs->fence,
struct hl_cs_compl, base_fence);
struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
struct hl_encaps_signals_mgr *mgr;
int rc = 0;
mgr = &hdev->compute_ctx->sig_mgr;
spin_lock(&mgr->lock);
encaps_sig_hdl = idr_find(&mgr->handles, cs->encaps_sig_hdl_id);
if (encaps_sig_hdl) {
/*
* Set handler CS sequence,
* the CS which contains the encapsulated signals.
*/
encaps_sig_hdl->cs_seq = cs->sequence;
/* store the handle and set encaps signal indication,
* to be used later in cs_do_release to put the last
* reference to encaps signals handlers.
*/
cs_cmpl->encaps_signals = true;
cs_cmpl->encaps_sig_hdl = encaps_sig_hdl;
/* set hw_sob pointer in completion object
* since it's used in cs_do_release flow to put
* refcount to sob
*/
cs_cmpl->hw_sob = encaps_sig_hdl->hw_sob;
cs_cmpl->sob_val = encaps_sig_hdl->pre_sob_val +
encaps_sig_hdl->count;
dev_dbg(hdev->dev, "CS seq (%llu) added to encaps signal handler id (%u), count(%u), qidx(%u), sob(%u), val(%u)\n",
cs->sequence, encaps_sig_hdl->id,
encaps_sig_hdl->count,
encaps_sig_hdl->q_idx,
cs_cmpl->hw_sob->sob_id,
cs_cmpl->sob_val);
} else {
dev_err(hdev->dev, "encaps handle id(%u) wasn't found!\n",
cs->encaps_sig_hdl_id);
rc = -EINVAL;
}
spin_unlock(&mgr->lock);
return rc;
}
@ -581,14 +679,21 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
if ((cs->type == CS_TYPE_SIGNAL) || (cs->type == CS_TYPE_WAIT)) {
rc = init_signal_wait_cs(cs);
if (rc) {
dev_err(hdev->dev, "Failed to submit signal cs\n");
if (rc)
goto unroll_cq_resv;
}
} else if (cs->type == CS_TYPE_COLLECTIVE_WAIT)
hdev->asic_funcs->collective_wait_init_cs(cs);
} else if (cs->type == CS_TYPE_COLLECTIVE_WAIT) {
rc = hdev->asic_funcs->collective_wait_init_cs(cs);
if (rc)
goto unroll_cq_resv;
}
if (cs->encaps_signals && cs->staged_first) {
rc = encaps_sig_first_staged_cs_handler(hdev, cs);
if (rc)
goto unroll_cq_resv;
}
spin_lock(&hdev->cs_mirror_lock);
/* Verify staged CS exists and add to the staged list */
@ -613,6 +718,11 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
}
list_add_tail(&cs->staged_cs_node, &staged_cs->staged_cs_node);
/* update stream map of the first CS */
if (hdev->supports_wait_for_multi_cs)
staged_cs->fence->stream_master_qid_map |=
cs->fence->stream_master_qid_map;
}
list_add_tail(&cs->mirror_node, &hdev->cs_mirror_list);
@ -834,6 +944,8 @@ static void sync_stream_queue_init(struct hl_device *hdev, u32 q_idx)
hw_sob = &sync_stream_prop->hw_sob[sob];
hw_sob->hdev = hdev;
hw_sob->sob_id = sync_stream_prop->base_sob_id + sob;
hw_sob->sob_addr =
hdev->asic_funcs->get_sob_addr(hdev, hw_sob->sob_id);
hw_sob->q_idx = q_idx;
kref_init(&hw_sob->kref);
}

View file

@ -124,7 +124,7 @@ static int alloc_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args,
spin_lock(&vm->idr_lock);
handle = idr_alloc(&vm->phys_pg_pack_handles, phys_pg_pack, 1, 0,
GFP_KERNEL);
GFP_ATOMIC);
spin_unlock(&vm->idr_lock);
if (handle < 0) {
@ -528,6 +528,33 @@ static inline int add_va_block(struct hl_device *hdev,
return rc;
}
/**
* is_hint_crossing_range() - check if hint address crossing specified reserved
* range.
*/
static inline bool is_hint_crossing_range(enum hl_va_range_type range_type,
u64 start_addr, u32 size, struct asic_fixed_properties *prop) {
bool range_cross;
if (range_type == HL_VA_RANGE_TYPE_DRAM)
range_cross =
hl_mem_area_crosses_range(start_addr, size,
prop->hints_dram_reserved_va_range.start_addr,
prop->hints_dram_reserved_va_range.end_addr);
else if (range_type == HL_VA_RANGE_TYPE_HOST)
range_cross =
hl_mem_area_crosses_range(start_addr, size,
prop->hints_host_reserved_va_range.start_addr,
prop->hints_host_reserved_va_range.end_addr);
else
range_cross =
hl_mem_area_crosses_range(start_addr, size,
prop->hints_host_hpage_reserved_va_range.start_addr,
prop->hints_host_hpage_reserved_va_range.end_addr);
return range_cross;
}
/**
* get_va_block() - get a virtual block for the given size and alignment.
*
@ -536,6 +563,8 @@ static inline int add_va_block(struct hl_device *hdev,
* @size: requested block size.
* @hint_addr: hint for requested address by the user.
* @va_block_align: required alignment of the virtual block start address.
* @range_type: va range type (host, dram)
* @flags: additional memory flags, currently only uses HL_MEM_FORCE_HINT
*
* This function does the following:
* - Iterate on the virtual block list to find a suitable virtual block for the
@ -545,13 +574,19 @@ static inline int add_va_block(struct hl_device *hdev,
*/
static u64 get_va_block(struct hl_device *hdev,
struct hl_va_range *va_range,
u64 size, u64 hint_addr, u32 va_block_align)
u64 size, u64 hint_addr, u32 va_block_align,
enum hl_va_range_type range_type,
u32 flags)
{
struct hl_vm_va_block *va_block, *new_va_block = NULL;
struct asic_fixed_properties *prop = &hdev->asic_prop;
u64 tmp_hint_addr, valid_start, valid_size, prev_start, prev_end,
align_mask, reserved_valid_start = 0, reserved_valid_size = 0;
align_mask, reserved_valid_start = 0, reserved_valid_size = 0,
dram_hint_mask = prop->dram_hints_align_mask;
bool add_prev = false;
bool is_align_pow_2 = is_power_of_2(va_range->page_size);
bool is_hint_dram_addr = hl_is_dram_va(hdev, hint_addr);
bool force_hint = flags & HL_MEM_FORCE_HINT;
if (is_align_pow_2)
align_mask = ~((u64)va_block_align - 1);
@ -564,12 +599,20 @@ static u64 get_va_block(struct hl_device *hdev,
size = DIV_ROUND_UP_ULL(size, va_range->page_size) *
va_range->page_size;
tmp_hint_addr = hint_addr;
tmp_hint_addr = hint_addr & ~dram_hint_mask;
/* Check if we need to ignore hint address */
if ((is_align_pow_2 && (hint_addr & (va_block_align - 1))) ||
(!is_align_pow_2 &&
do_div(tmp_hint_addr, va_range->page_size))) {
(!is_align_pow_2 && is_hint_dram_addr &&
do_div(tmp_hint_addr, va_range->page_size))) {
if (force_hint) {
/* Hint must be respected, so here we just fail */
dev_err(hdev->dev,
"Hint address 0x%llx is not page aligned - cannot be respected\n",
hint_addr);
return 0;
}
dev_dbg(hdev->dev,
"Hint address 0x%llx will be ignored because it is not aligned\n",
@ -596,6 +639,16 @@ static u64 get_va_block(struct hl_device *hdev,
if (valid_size < size)
continue;
/*
* In case hint address is 0, and arc_hints_range_reservation
* property enabled, then avoid allocating va blocks from the
* range reserved for hint addresses
*/
if (prop->hints_range_reservation && !hint_addr)
if (is_hint_crossing_range(range_type, valid_start,
size, prop))
continue;
/* Pick the minimal length block which has the required size */
if (!new_va_block || (valid_size < reserved_valid_size)) {
new_va_block = va_block;
@ -618,6 +671,17 @@ static u64 get_va_block(struct hl_device *hdev,
goto out;
}
if (force_hint && reserved_valid_start != hint_addr) {
/* Hint address must be respected. If we are here - this means
* we could not respect it.
*/
dev_err(hdev->dev,
"Hint address 0x%llx could not be respected\n",
hint_addr);
reserved_valid_start = 0;
goto out;
}
/*
* Check if there is some leftover range due to reserving the new
* va block, then return it to the main virtual addresses list.
@ -670,7 +734,8 @@ u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
enum hl_va_range_type type, u32 size, u32 alignment)
{
return get_va_block(hdev, ctx->va_range[type], size, 0,
max(alignment, ctx->va_range[type]->page_size));
max(alignment, ctx->va_range[type]->page_size),
type, 0);
}
/**
@ -731,29 +796,16 @@ int hl_unreserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
return rc;
}
/**
* get_sg_info() - get number of pages and the DMA address from SG list.
* @sg: the SG list.
* @dma_addr: pointer to DMA address to return.
*
* Calculate the number of consecutive pages described by the SG list. Take the
* offset of the address in the first page, add to it the length and round it up
* to the number of needed pages.
*/
static u32 get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
{
*dma_addr = sg_dma_address(sg);
return ((((*dma_addr) & (PAGE_SIZE - 1)) + sg_dma_len(sg)) +
(PAGE_SIZE - 1)) >> PAGE_SHIFT;
}
/**
* init_phys_pg_pack_from_userptr() - initialize physical page pack from host
* memory
* @ctx: pointer to the context structure.
* @userptr: userptr to initialize from.
* @pphys_pg_pack: result pointer.
* @force_regular_page: tell the function to ignore huge page optimization,
* even if possible. Needed for cases where the device VA
* is allocated before we know the composition of the
* physical pages
*
* This function does the following:
* - Pin the physical pages related to the given virtual block.
@ -762,17 +814,18 @@ static u32 get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
*/
static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
struct hl_userptr *userptr,
struct hl_vm_phys_pg_pack **pphys_pg_pack)
struct hl_vm_phys_pg_pack **pphys_pg_pack,
bool force_regular_page)
{
struct hl_vm_phys_pg_pack *phys_pg_pack;
struct scatterlist *sg;
dma_addr_t dma_addr;
u64 page_mask, total_npages;
u32 npages, page_size = PAGE_SIZE,
huge_page_size = ctx->hdev->asic_prop.pmmu_huge.page_size;
bool first = true, is_huge_page_opt = true;
int rc, i, j;
u32 pgs_in_huge_page = huge_page_size >> __ffs(page_size);
struct hl_vm_phys_pg_pack *phys_pg_pack;
bool first = true, is_huge_page_opt;
u64 page_mask, total_npages;
struct scatterlist *sg;
dma_addr_t dma_addr;
int rc, i, j;
phys_pg_pack = kzalloc(sizeof(*phys_pg_pack), GFP_KERNEL);
if (!phys_pg_pack)
@ -783,6 +836,8 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
phys_pg_pack->asid = ctx->asid;
atomic_set(&phys_pg_pack->mapping_cnt, 1);
is_huge_page_opt = (force_regular_page ? false : true);
/* Only if all dma_addrs are aligned to 2MB and their
* sizes is at least 2MB, we can use huge page mapping.
* We limit the 2MB optimization to this condition,
@ -791,7 +846,7 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
*/
total_npages = 0;
for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
npages = get_sg_info(sg, &dma_addr);
npages = hl_get_sg_info(sg, &dma_addr);
total_npages += npages;
@ -820,7 +875,7 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
j = 0;
for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
npages = get_sg_info(sg, &dma_addr);
npages = hl_get_sg_info(sg, &dma_addr);
/* align down to physical page size and save the offset */
if (first) {
@ -1001,11 +1056,12 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
struct hl_userptr *userptr = NULL;
struct hl_vm_hash_node *hnode;
struct hl_va_range *va_range;
enum vm_type_t *vm_type;
enum vm_type *vm_type;
u64 ret_vaddr, hint_addr;
u32 handle = 0, va_block_align;
int rc;
bool is_userptr = args->flags & HL_MEM_USERPTR;
enum hl_va_range_type va_range_type = 0;
/* Assume failure */
*device_addr = 0;
@ -1023,7 +1079,7 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
}
rc = init_phys_pg_pack_from_userptr(ctx, userptr,
&phys_pg_pack);
&phys_pg_pack, false);
if (rc) {
dev_err(hdev->dev,
"unable to init page pack for vaddr 0x%llx\n",
@ -1031,14 +1087,14 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
goto init_page_pack_err;
}
vm_type = (enum vm_type_t *) userptr;
vm_type = (enum vm_type *) userptr;
hint_addr = args->map_host.hint_addr;
handle = phys_pg_pack->handle;
/* get required alignment */
if (phys_pg_pack->page_size == page_size) {
va_range = ctx->va_range[HL_VA_RANGE_TYPE_HOST];
va_range_type = HL_VA_RANGE_TYPE_HOST;
/*
* huge page alignment may be needed in case of regular
* page mapping, depending on the host VA alignment
@ -1053,6 +1109,7 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
* mapping
*/
va_range = ctx->va_range[HL_VA_RANGE_TYPE_HOST_HUGE];
va_range_type = HL_VA_RANGE_TYPE_HOST_HUGE;
va_block_align = huge_page_size;
}
} else {
@ -1072,12 +1129,13 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
spin_unlock(&vm->idr_lock);
vm_type = (enum vm_type_t *) phys_pg_pack;
vm_type = (enum vm_type *) phys_pg_pack;
hint_addr = args->map_device.hint_addr;
/* DRAM VA alignment is the same as the MMU page size */
va_range = ctx->va_range[HL_VA_RANGE_TYPE_DRAM];
va_range_type = HL_VA_RANGE_TYPE_DRAM;
va_block_align = hdev->asic_prop.dmmu.page_size;
}
@ -1100,8 +1158,23 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
goto hnode_err;
}
if (hint_addr && phys_pg_pack->offset) {
if (args->flags & HL_MEM_FORCE_HINT) {
/* Fail if hint must be respected but it can't be */
dev_err(hdev->dev,
"Hint address 0x%llx cannot be respected because source memory is not aligned 0x%x\n",
hint_addr, phys_pg_pack->offset);
rc = -EINVAL;
goto va_block_err;
}
dev_dbg(hdev->dev,
"Hint address 0x%llx will be ignored because source memory is not aligned 0x%x\n",
hint_addr, phys_pg_pack->offset);
}
ret_vaddr = get_va_block(hdev, va_range, phys_pg_pack->total_size,
hint_addr, va_block_align);
hint_addr, va_block_align,
va_range_type, args->flags);
if (!ret_vaddr) {
dev_err(hdev->dev, "no available va block for handle %u\n",
handle);
@ -1181,17 +1254,19 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
bool ctx_free)
{
struct hl_device *hdev = ctx->hdev;
struct asic_fixed_properties *prop = &hdev->asic_prop;
struct hl_vm_phys_pg_pack *phys_pg_pack = NULL;
u64 vaddr = args->unmap.device_virt_addr;
struct hl_vm_hash_node *hnode = NULL;
struct asic_fixed_properties *prop;
struct hl_device *hdev = ctx->hdev;
struct hl_userptr *userptr = NULL;
struct hl_va_range *va_range;
u64 vaddr = args->unmap.device_virt_addr;
enum vm_type_t *vm_type;
enum vm_type *vm_type;
bool is_userptr;
int rc = 0;
prop = &hdev->asic_prop;
/* protect from double entrance */
mutex_lock(&ctx->mem_hash_lock);
hash_for_each_possible(ctx->mem_hash, hnode, node, (unsigned long)vaddr)
@ -1214,8 +1289,9 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
if (*vm_type == VM_TYPE_USERPTR) {
is_userptr = true;
userptr = hnode->ptr;
rc = init_phys_pg_pack_from_userptr(ctx, userptr,
&phys_pg_pack);
rc = init_phys_pg_pack_from_userptr(ctx, userptr, &phys_pg_pack,
false);
if (rc) {
dev_err(hdev->dev,
"unable to init page pack for vaddr 0x%llx\n",
@ -1299,7 +1375,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
kfree(hnode);
if (is_userptr) {
rc = free_phys_pg_pack(hdev, phys_pg_pack);
free_phys_pg_pack(hdev, phys_pg_pack);
dma_unmap_host_va(hdev, userptr);
}
@ -1669,6 +1745,7 @@ int hl_pin_host_memory(struct hl_device *hdev, u64 addr, u64 size,
return -EINVAL;
}
userptr->pid = current->pid;
userptr->sgt = kzalloc(sizeof(*userptr->sgt), GFP_KERNEL);
if (!userptr->sgt)
return -ENOMEM;
@ -2033,7 +2110,7 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
* another side effect error
*/
if (!hdev->hard_reset_pending && !hash_empty(ctx->mem_hash))
dev_notice(hdev->dev,
dev_dbg(hdev->dev,
"user released device without removing its memory mappings\n");
hash_for_each_safe(ctx->mem_hash, i, tmp_node, hnode, node) {

View file

@ -470,13 +470,13 @@ static void hl_mmu_v1_fini(struct hl_device *hdev)
if (!ZERO_OR_NULL_PTR(hdev->mmu_priv.hr.mmu_shadow_hop0)) {
kvfree(hdev->mmu_priv.dr.mmu_shadow_hop0);
gen_pool_destroy(hdev->mmu_priv.dr.mmu_pgt_pool);
}
/* Make sure that if we arrive here again without init was called we
* won't cause kernel panic. This can happen for example if we fail
* during hard reset code at certain points
*/
hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
/* Make sure that if we arrive here again without init was
* called we won't cause kernel panic. This can happen for
* example if we fail during hard reset code at certain points
*/
hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
}
}
/**

View file

@ -436,6 +436,8 @@ int hl_pci_init(struct hl_device *hdev)
goto unmap_pci_bars;
}
dma_set_max_seg_size(&pdev->dev, U32_MAX);
return 0;
unmap_pci_bars:

View file

@ -0,0 +1,718 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2021 HabanaLabs, Ltd.
* All Rights Reserved.
*/
#include <linux/vmalloc.h>
#include <uapi/misc/habanalabs.h>
#include "habanalabs.h"
/**
* hl_format_as_binary - helper function, format an integer as binary
* using supplied scratch buffer
* @buf: the buffer to use
* @buf_len: buffer capacity
* @n: number to format
*
* Returns pointer to buffer
*/
char *hl_format_as_binary(char *buf, size_t buf_len, u32 n)
{
int i;
u32 bit;
bool leading0 = true;
char *wrptr = buf;
if (buf_len > 0 && buf_len < 3) {
*wrptr = '\0';
return buf;
}
wrptr[0] = '0';
wrptr[1] = 'b';
wrptr += 2;
/* Remove 3 characters from length for '0b' and '\0' termination */
buf_len -= 3;
for (i = 0; i < sizeof(n) * BITS_PER_BYTE && buf_len; ++i, n <<= 1) {
/* Writing bit calculation in one line would cause a false
* positive static code analysis error, so splitting.
*/
bit = n & (1 << (sizeof(n) * BITS_PER_BYTE - 1));
bit = !!bit;
leading0 &= !bit;
if (!leading0) {
*wrptr = '0' + bit;
++wrptr;
}
}
*wrptr = '\0';
return buf;
}
/**
* resize_to_fit - helper function, resize buffer to fit given amount of data
* @buf: destination buffer double pointer
* @size: pointer to the size container
* @desired_size: size the buffer must contain
*
* Returns 0 on success or error code on failure.
* On success, the size of buffer is at least desired_size. Buffer is allocated
* via vmalloc and must be freed with vfree.
*/
static int resize_to_fit(char **buf, size_t *size, size_t desired_size)
{
char *resized_buf;
size_t new_size;
if (*size >= desired_size)
return 0;
/* Not enough space to print all, have to resize */
new_size = max_t(size_t, PAGE_SIZE, round_up(desired_size, PAGE_SIZE));
resized_buf = vmalloc(new_size);
if (!resized_buf)
return -ENOMEM;
memcpy(resized_buf, *buf, *size);
vfree(*buf);
*buf = resized_buf;
*size = new_size;
return 1;
}
/**
* hl_snprintf_resize() - print formatted data to buffer, resize as needed
* @buf: buffer double pointer, to be written to and resized, must be either
* NULL or allocated with vmalloc.
* @size: current size of the buffer
* @offset: current offset to write to
* @format: format of the data
*
* This function will write formatted data into the buffer. If buffer is not
* large enough, it will be resized using vmalloc. Size may be modified if the
* buffer was resized, offset will be advanced by the number of bytes written
* not including the terminating character
*
* Returns 0 on success or error code on failure
*
* Note that the buffer has to be manually released using vfree.
*/
int hl_snprintf_resize(char **buf, size_t *size, size_t *offset,
const char *format, ...)
{
va_list args;
size_t length;
int rc;
if (*buf == NULL && (*size != 0 || *offset != 0))
return -EINVAL;
va_start(args, format);
length = vsnprintf(*buf + *offset, *size - *offset, format, args);
va_end(args);
rc = resize_to_fit(buf, size, *offset + length + 1);
if (rc < 0)
return rc;
else if (rc > 0) {
/* Resize was needed, write again */
va_start(args, format);
length = vsnprintf(*buf + *offset, *size - *offset, format,
args);
va_end(args);
}
*offset += length;
return 0;
}
/**
* hl_sync_engine_to_string - convert engine type enum to string literal
* @engine_type: engine type (TPC/MME/DMA)
*
* Return the resolved string literal
*/
const char *hl_sync_engine_to_string(enum hl_sync_engine_type engine_type)
{
switch (engine_type) {
case ENGINE_DMA:
return "DMA";
case ENGINE_MME:
return "MME";
case ENGINE_TPC:
return "TPC";
}
return "Invalid Engine Type";
}
/**
* hl_print_resize_sync_engine - helper function, format engine name and ID
* using hl_snprintf_resize
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
* @engine_type: engine type (TPC/MME/DMA)
* @engine_id: engine numerical id
*
* Returns 0 on success or error code on failure
*/
static int hl_print_resize_sync_engine(char **buf, size_t *size, size_t *offset,
enum hl_sync_engine_type engine_type,
u32 engine_id)
{
return hl_snprintf_resize(buf, size, offset, "%s%u",
hl_sync_engine_to_string(engine_type), engine_id);
}
/**
* hl_state_dump_get_sync_name - transform sync object id to name if available
* @hdev: pointer to the device
* @sync_id: sync object id
*
* Returns a name literal or NULL if not resolved.
* Note: returning NULL shall not be considered as a failure, as not all
* sync objects are named.
*/
const char *hl_state_dump_get_sync_name(struct hl_device *hdev, u32 sync_id)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
struct hl_hw_obj_name_entry *entry;
hash_for_each_possible(sds->so_id_to_str_tb, entry,
node, sync_id)
if (sync_id == entry->id)
return entry->name;
return NULL;
}
/**
* hl_state_dump_get_monitor_name - transform monitor object dump to monitor
* name if available
* @hdev: pointer to the device
* @mon: monitor state dump
*
* Returns a name literal or NULL if not resolved.
* Note: returning NULL shall not be considered as a failure, as not all
* monitors are named.
*/
const char *hl_state_dump_get_monitor_name(struct hl_device *hdev,
struct hl_mon_state_dump *mon)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
struct hl_hw_obj_name_entry *entry;
hash_for_each_possible(sds->monitor_id_to_str_tb,
entry, node, mon->id)
if (mon->id == entry->id)
return entry->name;
return NULL;
}
/**
* hl_state_dump_free_sync_to_engine_map - free sync object to engine map
* @map: sync object to engine map
*
* Note: generic free implementation, the allocation is implemented per ASIC.
*/
void hl_state_dump_free_sync_to_engine_map(struct hl_sync_to_engine_map *map)
{
struct hl_sync_to_engine_map_entry *entry;
struct hlist_node *tmp_node;
int i;
hash_for_each_safe(map->tb, i, tmp_node, entry, node) {
hash_del(&entry->node);
kfree(entry);
}
}
/**
* hl_state_dump_get_sync_to_engine - transform sync_id to
* hl_sync_to_engine_map_entry if available for current id
* @map: sync object to engine map
* @sync_id: sync object id
*
* Returns the translation entry if found or NULL if not.
* Note, returned NULL shall not be considered as a failure as the map
* does not cover all possible, it is a best effort sync ids.
*/
static struct hl_sync_to_engine_map_entry *
hl_state_dump_get_sync_to_engine(struct hl_sync_to_engine_map *map, u32 sync_id)
{
struct hl_sync_to_engine_map_entry *entry;
hash_for_each_possible(map->tb, entry, node, sync_id)
if (entry->sync_id == sync_id)
return entry;
return NULL;
}
/**
* hl_state_dump_read_sync_objects - read sync objects array
* @hdev: pointer to the device
* @index: sync manager block index starting with E_N
*
* Returns array of size SP_SYNC_OBJ_AMOUNT on success or NULL on failure
*/
static u32 *hl_state_dump_read_sync_objects(struct hl_device *hdev, u32 index)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
u32 *sync_objects;
s64 base_addr; /* Base addr can be negative */
int i;
base_addr = sds->props[SP_SYNC_OBJ_BASE_ADDR] +
sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index;
sync_objects = vmalloc(sds->props[SP_SYNC_OBJ_AMOUNT] * sizeof(u32));
if (!sync_objects)
return NULL;
for (i = 0; i < sds->props[SP_SYNC_OBJ_AMOUNT]; ++i)
sync_objects[i] = RREG32(base_addr + i * sizeof(u32));
return sync_objects;
}
/**
* hl_state_dump_free_sync_objects - free sync objects array allocated by
* hl_state_dump_read_sync_objects
* @sync_objects: sync objects array
*/
static void hl_state_dump_free_sync_objects(u32 *sync_objects)
{
vfree(sync_objects);
}
/**
* hl_state_dump_print_syncs_single_block - print active sync objects on a
* single block
* @hdev: pointer to the device
* @index: sync manager block index starting with E_N
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
* @map: sync engines names map
*
* Returns 0 on success or error code on failure
*/
static int
hl_state_dump_print_syncs_single_block(struct hl_device *hdev, u32 index,
char **buf, size_t *size, size_t *offset,
struct hl_sync_to_engine_map *map)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
const char *sync_name;
u32 *sync_objects = NULL;
int rc = 0, i;
if (sds->sync_namager_names) {
rc = hl_snprintf_resize(
buf, size, offset, "%s\n",
sds->sync_namager_names[index]);
if (rc)
goto out;
}
sync_objects = hl_state_dump_read_sync_objects(hdev, index);
if (!sync_objects) {
rc = -ENOMEM;
goto out;
}
for (i = 0; i < sds->props[SP_SYNC_OBJ_AMOUNT]; ++i) {
struct hl_sync_to_engine_map_entry *entry;
u64 sync_object_addr;
if (!sync_objects[i])
continue;
sync_object_addr = sds->props[SP_SYNC_OBJ_BASE_ADDR] +
sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index +
i * sizeof(u32);
rc = hl_snprintf_resize(buf, size, offset, "sync id: %u", i);
if (rc)
goto free_sync_objects;
sync_name = hl_state_dump_get_sync_name(hdev, i);
if (sync_name) {
rc = hl_snprintf_resize(buf, size, offset, " %s",
sync_name);
if (rc)
goto free_sync_objects;
}
rc = hl_snprintf_resize(buf, size, offset, ", value: %u",
sync_objects[i]);
if (rc)
goto free_sync_objects;
/* Append engine string */
entry = hl_state_dump_get_sync_to_engine(map,
(u32)sync_object_addr);
if (entry) {
rc = hl_snprintf_resize(buf, size, offset,
", Engine: ");
if (rc)
goto free_sync_objects;
rc = hl_print_resize_sync_engine(buf, size, offset,
entry->engine_type,
entry->engine_id);
if (rc)
goto free_sync_objects;
}
rc = hl_snprintf_resize(buf, size, offset, "\n");
if (rc)
goto free_sync_objects;
}
free_sync_objects:
hl_state_dump_free_sync_objects(sync_objects);
out:
return rc;
}
/**
* hl_state_dump_print_syncs - print active sync objects
* @hdev: pointer to the device
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
*
* Returns 0 on success or error code on failure
*/
static int hl_state_dump_print_syncs(struct hl_device *hdev,
char **buf, size_t *size,
size_t *offset)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
struct hl_sync_to_engine_map *map;
u32 index;
int rc = 0;
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map)
return -ENOMEM;
rc = sds->funcs.gen_sync_to_engine_map(hdev, map);
if (rc)
goto free_map_mem;
rc = hl_snprintf_resize(buf, size, offset, "Non zero sync objects:\n");
if (rc)
goto out;
if (sds->sync_namager_names) {
for (index = 0; sds->sync_namager_names[index]; ++index) {
rc = hl_state_dump_print_syncs_single_block(
hdev, index, buf, size, offset, map);
if (rc)
goto out;
}
} else {
for (index = 0; index < sds->props[SP_NUM_CORES]; ++index) {
rc = hl_state_dump_print_syncs_single_block(
hdev, index, buf, size, offset, map);
if (rc)
goto out;
}
}
out:
hl_state_dump_free_sync_to_engine_map(map);
free_map_mem:
kfree(map);
return rc;
}
/**
* hl_state_dump_alloc_read_sm_block_monitors - read monitors for a specific
* block
* @hdev: pointer to the device
* @index: sync manager block index starting with E_N
*
* Returns an array of monitor data of size SP_MONITORS_AMOUNT or NULL
* on error
*/
static struct hl_mon_state_dump *
hl_state_dump_alloc_read_sm_block_monitors(struct hl_device *hdev, u32 index)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
struct hl_mon_state_dump *monitors;
s64 base_addr; /* Base addr can be negative */
int i;
monitors = vmalloc(sds->props[SP_MONITORS_AMOUNT] *
sizeof(struct hl_mon_state_dump));
if (!monitors)
return NULL;
base_addr = sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index;
for (i = 0; i < sds->props[SP_MONITORS_AMOUNT]; ++i) {
monitors[i].id = i;
monitors[i].wr_addr_low =
RREG32(base_addr + sds->props[SP_MON_OBJ_WR_ADDR_LOW] +
i * sizeof(u32));
monitors[i].wr_addr_high =
RREG32(base_addr + sds->props[SP_MON_OBJ_WR_ADDR_HIGH] +
i * sizeof(u32));
monitors[i].wr_data =
RREG32(base_addr + sds->props[SP_MON_OBJ_WR_DATA] +
i * sizeof(u32));
monitors[i].arm_data =
RREG32(base_addr + sds->props[SP_MON_OBJ_ARM_DATA] +
i * sizeof(u32));
monitors[i].status =
RREG32(base_addr + sds->props[SP_MON_OBJ_STATUS] +
i * sizeof(u32));
}
return monitors;
}
/**
* hl_state_dump_free_monitors - free the monitors structure
* @monitors: monitors array created with
* hl_state_dump_alloc_read_sm_block_monitors
*/
static void hl_state_dump_free_monitors(struct hl_mon_state_dump *monitors)
{
vfree(monitors);
}
/**
* hl_state_dump_print_monitors_single_block - print active monitors on a
* single block
* @hdev: pointer to the device
* @index: sync manager block index starting with E_N
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
*
* Returns 0 on success or error code on failure
*/
static int hl_state_dump_print_monitors_single_block(struct hl_device *hdev,
u32 index,
char **buf, size_t *size,
size_t *offset)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
struct hl_mon_state_dump *monitors = NULL;
int rc = 0, i;
if (sds->sync_namager_names) {
rc = hl_snprintf_resize(
buf, size, offset, "%s\n",
sds->sync_namager_names[index]);
if (rc)
goto out;
}
monitors = hl_state_dump_alloc_read_sm_block_monitors(hdev, index);
if (!monitors) {
rc = -ENOMEM;
goto out;
}
for (i = 0; i < sds->props[SP_MONITORS_AMOUNT]; ++i) {
if (!(sds->funcs.monitor_valid(&monitors[i])))
continue;
/* Monitor is valid, dump it */
rc = sds->funcs.print_single_monitor(buf, size, offset, hdev,
&monitors[i]);
if (rc)
goto free_monitors;
hl_snprintf_resize(buf, size, offset, "\n");
}
free_monitors:
hl_state_dump_free_monitors(monitors);
out:
return rc;
}
/**
* hl_state_dump_print_monitors - print active monitors
* @hdev: pointer to the device
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
*
* Returns 0 on success or error code on failure
*/
static int hl_state_dump_print_monitors(struct hl_device *hdev,
char **buf, size_t *size,
size_t *offset)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
u32 index;
int rc = 0;
rc = hl_snprintf_resize(buf, size, offset,
"Valid (armed) monitor objects:\n");
if (rc)
goto out;
if (sds->sync_namager_names) {
for (index = 0; sds->sync_namager_names[index]; ++index) {
rc = hl_state_dump_print_monitors_single_block(
hdev, index, buf, size, offset);
if (rc)
goto out;
}
} else {
for (index = 0; index < sds->props[SP_NUM_CORES]; ++index) {
rc = hl_state_dump_print_monitors_single_block(
hdev, index, buf, size, offset);
if (rc)
goto out;
}
}
out:
return rc;
}
/**
* hl_state_dump_print_engine_fences - print active fences for a specific
* engine
* @hdev: pointer to the device
* @engine_type: engine type to use
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
*/
static int
hl_state_dump_print_engine_fences(struct hl_device *hdev,
enum hl_sync_engine_type engine_type,
char **buf, size_t *size, size_t *offset)
{
struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
int rc = 0, i, n_fences;
u64 base_addr, next_fence;
switch (engine_type) {
case ENGINE_TPC:
n_fences = sds->props[SP_NUM_OF_TPC_ENGINES];
base_addr = sds->props[SP_TPC0_CMDQ];
next_fence = sds->props[SP_NEXT_TPC];
break;
case ENGINE_MME:
n_fences = sds->props[SP_NUM_OF_MME_ENGINES];
base_addr = sds->props[SP_MME_CMDQ];
next_fence = sds->props[SP_NEXT_MME];
break;
case ENGINE_DMA:
n_fences = sds->props[SP_NUM_OF_DMA_ENGINES];
base_addr = sds->props[SP_DMA_CMDQ];
next_fence = sds->props[SP_DMA_QUEUES_OFFSET];
break;
default:
return -EINVAL;
}
for (i = 0; i < n_fences; ++i) {
rc = sds->funcs.print_fences_single_engine(
hdev,
base_addr + next_fence * i +
sds->props[SP_FENCE0_CNT_OFFSET],
base_addr + next_fence * i +
sds->props[SP_CP_STS_OFFSET],
engine_type, i, buf, size, offset);
if (rc)
goto out;
}
out:
return rc;
}
/**
* hl_state_dump_print_fences - print active fences
* @hdev: pointer to the device
* @buf: destination buffer double pointer to be used with hl_snprintf_resize
* @size: pointer to the size container
* @offset: pointer to the offset container
*/
static int hl_state_dump_print_fences(struct hl_device *hdev, char **buf,
size_t *size, size_t *offset)
{
int rc = 0;
rc = hl_snprintf_resize(buf, size, offset, "Valid (armed) fences:\n");
if (rc)
goto out;
rc = hl_state_dump_print_engine_fences(hdev, ENGINE_TPC, buf, size, offset);
if (rc)
goto out;
rc = hl_state_dump_print_engine_fences(hdev, ENGINE_MME, buf, size, offset);
if (rc)
goto out;
rc = hl_state_dump_print_engine_fences(hdev, ENGINE_DMA, buf, size, offset);
if (rc)
goto out;
out:
return rc;
}
/**
* hl_state_dump() - dump system state
* @hdev: pointer to device structure
*/
int hl_state_dump(struct hl_device *hdev)
{
char *buf = NULL;
size_t offset = 0, size = 0;
int rc;
rc = hl_snprintf_resize(&buf, &size, &offset,
"Timestamp taken on: %llu\n\n",
ktime_to_ns(ktime_get()));
if (rc)
goto err;
rc = hl_state_dump_print_syncs(hdev, &buf, &size, &offset);
if (rc)
goto err;
hl_snprintf_resize(&buf, &size, &offset, "\n");
rc = hl_state_dump_print_monitors(hdev, &buf, &size, &offset);
if (rc)
goto err;
hl_snprintf_resize(&buf, &size, &offset, "\n");
rc = hl_state_dump_print_fences(hdev, &buf, &size, &offset);
if (rc)
goto err;
hl_snprintf_resize(&buf, &size, &offset, "\n");
hl_debugfs_set_state_dump(hdev, buf, size);
return 0;
err:
vfree(buf);
return rc;
}

View file

@ -9,8 +9,7 @@
#include <linux/pci.h>
long hl_get_frequency(struct hl_device *hdev, u32 pll_index,
bool curr)
long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr)
{
struct cpucp_packet pkt;
u32 used_pll_idx;
@ -44,8 +43,7 @@ long hl_get_frequency(struct hl_device *hdev, u32 pll_index,
return (long) result;
}
void hl_set_frequency(struct hl_device *hdev, u32 pll_index,
u64 freq)
void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq)
{
struct cpucp_packet pkt;
u32 used_pll_idx;
@ -285,16 +283,12 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct hl_device *hdev = dev_get_drvdata(dev);
char *str;
char str[HL_STR_MAX];
if (atomic_read(&hdev->in_reset))
str = "In reset";
else if (hdev->disabled)
str = "Malfunction";
else if (hdev->needs_reset)
str = "Needs Reset";
else
str = "Operational";
strscpy(str, hdev->status[hl_device_status(hdev)], HL_STR_MAX);
/* use uppercase for backward compatibility */
str[0] = 'A' + (str[0] - 'a');
return sprintf(buf, "%s\n", str);
}

File diff suppressed because it is too large Load diff

View file

@ -36,6 +36,8 @@
#define NUMBER_OF_INTERRUPTS (NUMBER_OF_CMPLT_QUEUES + \
NUMBER_OF_CPU_HW_QUEUES)
#define GAUDI_STREAM_MASTER_ARR_SIZE 8
#if (NUMBER_OF_INTERRUPTS > GAUDI_MSI_ENTRIES)
#error "Number of MSI interrupts must be smaller or equal to GAUDI_MSI_ENTRIES"
#endif
@ -50,6 +52,8 @@
#define DC_POWER_DEFAULT_PCI 60000 /* 60W */
#define DC_POWER_DEFAULT_PMC 60000 /* 60W */
#define DC_POWER_DEFAULT_PMC_SEC 97000 /* 97W */
#define GAUDI_CPU_TIMEOUT_USEC 30000000 /* 30s */
#define TPC_ENABLED_MASK 0xFF
@ -62,7 +66,7 @@
#define DMA_MAX_TRANSFER_SIZE U32_MAX
#define GAUDI_DEFAULT_CARD_NAME "HL2000"
#define GAUDI_DEFAULT_CARD_NAME "HL205"
#define GAUDI_MAX_PENDING_CS SZ_16K
@ -117,6 +121,7 @@
(((mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_511 - \
mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_0) + 4) >> 2)
#define MONITOR_MAX_SOBS 8
/* DRAM Memory Map */
@ -200,6 +205,18 @@
#define HW_CAP_TPC_MASK GENMASK(31, 24)
#define HW_CAP_TPC_SHIFT 24
#define NEXT_SYNC_OBJ_ADDR_INTERVAL \
(mmSYNC_MNGR_W_N_SYNC_MNGR_OBJS_SOB_OBJ_0 - \
mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_0)
#define NUM_OF_MME_ENGINES 2
#define NUM_OF_MME_SUB_ENGINES 2
#define NUM_OF_TPC_ENGINES 8
#define NUM_OF_DMA_ENGINES 8
#define NUM_OF_QUEUES 5
#define NUM_OF_STREAMS 4
#define NUM_OF_FENCES 4
#define GAUDI_CPU_PCI_MSB_ADDR(addr) (((addr) & GENMASK_ULL(49, 39)) >> 39)
#define GAUDI_PCI_TO_CPU_ADDR(addr) \
do { \

View file

@ -622,11 +622,6 @@ static int gaudi_config_etr(struct hl_device *hdev,
return -EINVAL;
}
gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_ARUSER,
hdev->compute_ctx->asid);
gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_AWUSER,
hdev->compute_ctx->asid);
msb = upper_32_bits(input->buffer_address) >> 8;
msb &= PSOC_GLOBAL_CONF_TRACE_ADDR_MSB_MASK;
WREG32(mmPSOC_GLOBAL_CONF_TRACE_ADDR, msb);

View file

@ -9559,6 +9559,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC0_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC0_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -10013,6 +10014,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC1_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC1_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -10466,6 +10468,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC2_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC2_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -10919,6 +10922,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC3_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC3_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -11372,6 +11376,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC4_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC4_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -11825,6 +11830,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC5_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC5_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -12280,6 +12286,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC6_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC6_CFG_MSS_CONFIG & 0x7F) >> 2);
@ -12735,6 +12742,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
mask |= 1U << ((mmTPC7_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_TPC_STALL & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
mask |= 1U << ((mmTPC7_CFG_MSS_CONFIG & 0x7F) >> 2);

View file

@ -350,6 +350,8 @@ static u32 goya_all_events[] = {
GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E
};
static s64 goya_state_dump_specs_props[SP_MAX] = {0};
static int goya_mmu_clear_pgt_range(struct hl_device *hdev);
static int goya_mmu_set_dram_default_page(struct hl_device *hdev);
static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev);
@ -387,6 +389,7 @@ int goya_set_fixed_properties(struct hl_device *hdev)
prop->hw_queues_props[i].cb_alloc_flags = CB_ALLOC_USER;
}
prop->device_dma_offset_for_host_access = HOST_PHYS_BASE;
prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
prop->dram_base_address = DRAM_PHYS_BASE;
@ -466,6 +469,8 @@ int goya_set_fixed_properties(struct hl_device *hdev)
prop->hard_reset_done_by_fw = false;
prop->gic_interrupts_enable = true;
prop->server_type = HL_SERVER_TYPE_UNKNOWN;
return 0;
}
@ -649,14 +654,14 @@ static int goya_early_init(struct hl_device *hdev)
GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
if (rc) {
if (hdev->reset_on_preboot_fail)
hdev->asic_funcs->hw_fini(hdev, true);
hdev->asic_funcs->hw_fini(hdev, true, false);
goto pci_fini;
}
if (goya_get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
dev_info(hdev->dev,
"H/W state is dirty, must reset before initializing\n");
hdev->asic_funcs->hw_fini(hdev, true);
hdev->asic_funcs->hw_fini(hdev, true, false);
}
if (!hdev->pldm) {
@ -955,8 +960,9 @@ static int goya_sw_init(struct hl_device *hdev)
hdev->supports_coresight = true;
hdev->supports_soft_reset = true;
hdev->allow_external_soft_reset = true;
hdev->supports_wait_for_multi_cs = false;
goya_set_pci_memory_regions(hdev);
hdev->asic_funcs->set_pci_memory_regions(hdev);
return 0;
@ -2374,7 +2380,7 @@ static void goya_disable_timestamp(struct hl_device *hdev)
WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
}
static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
static void goya_halt_engines(struct hl_device *hdev, bool hard_reset, bool fw_reset)
{
u32 wait_timeout_ms;
@ -2493,6 +2499,7 @@ static void goya_init_firmware_loader(struct hl_device *hdev)
struct fw_load_mgr *fw_loader = &hdev->fw_loader;
/* fill common fields */
fw_loader->linux_loaded = false;
fw_loader->boot_fit_img.image_name = GOYA_BOOT_FIT_FILE;
fw_loader->linux_img.image_name = GOYA_LINUX_FW_FILE;
fw_loader->cpu_timeout = GOYA_CPU_TIMEOUT_USEC;
@ -2696,14 +2703,7 @@ static int goya_hw_init(struct hl_device *hdev)
return rc;
}
/*
* goya_hw_fini - Goya hardware tear-down code
*
* @hdev: pointer to hl_device structure
* @hard_reset: should we do hard reset to all engines or just reset the
* compute/dma engines
*/
static void goya_hw_fini(struct hl_device *hdev, bool hard_reset)
static void goya_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset)
{
struct goya_device *goya = hdev->asic_specific;
u32 reset_timeout_ms, cpu_timeout_ms, status;
@ -2796,7 +2796,7 @@ int goya_resume(struct hl_device *hdev)
return goya_init_iatu(hdev);
}
static int goya_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
static int goya_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size)
{
int rc;
@ -4797,6 +4797,12 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
>> EQ_CTL_EVENT_TYPE_SHIFT);
struct goya_device *goya = hdev->asic_specific;
if (event_type >= GOYA_ASYNC_EVENT_ID_SIZE) {
dev_err(hdev->dev, "Event type %u exceeds maximum of %u",
event_type, GOYA_ASYNC_EVENT_ID_SIZE - 1);
return;
}
goya->events_stat[event_type]++;
goya->events_stat_aggregate[event_type]++;
@ -5475,14 +5481,14 @@ u64 goya_get_device_time(struct hl_device *hdev)
return device_time | RREG32(mmPSOC_TIMESTAMP_CNTCVL);
}
static void goya_collective_wait_init_cs(struct hl_cs *cs)
static int goya_collective_wait_init_cs(struct hl_cs *cs)
{
return 0;
}
static int goya_collective_wait_create_jobs(struct hl_device *hdev,
struct hl_ctx *ctx, struct hl_cs *cs, u32 wait_queue_id,
u32 collective_engine_id)
u32 collective_engine_id, u32 encaps_signal_offset)
{
return -EINVAL;
}
@ -5524,6 +5530,62 @@ static int goya_map_pll_idx_to_fw_idx(u32 pll_idx)
}
}
static int goya_gen_sync_to_engine_map(struct hl_device *hdev,
struct hl_sync_to_engine_map *map)
{
/* Not implemented */
return 0;
}
static int goya_monitor_valid(struct hl_mon_state_dump *mon)
{
/* Not implemented */
return 0;
}
static int goya_print_single_monitor(char **buf, size_t *size, size_t *offset,
struct hl_device *hdev,
struct hl_mon_state_dump *mon)
{
/* Not implemented */
return 0;
}
static int goya_print_fences_single_engine(
struct hl_device *hdev, u64 base_offset, u64 status_base_offset,
enum hl_sync_engine_type engine_type, u32 engine_id, char **buf,
size_t *size, size_t *offset)
{
/* Not implemented */
return 0;
}
static struct hl_state_dump_specs_funcs goya_state_dump_funcs = {
.monitor_valid = goya_monitor_valid,
.print_single_monitor = goya_print_single_monitor,
.gen_sync_to_engine_map = goya_gen_sync_to_engine_map,
.print_fences_single_engine = goya_print_fences_single_engine,
};
static void goya_state_dump_init(struct hl_device *hdev)
{
/* Not implemented */
hdev->state_dump_specs.props = goya_state_dump_specs_props;
hdev->state_dump_specs.funcs = goya_state_dump_funcs;
}
static u32 goya_get_sob_addr(struct hl_device *hdev, u32 sob_id)
{
return 0;
}
static u32 *goya_get_stream_master_qid_arr(void)
{
return NULL;
}
static const struct hl_asic_funcs goya_funcs = {
.early_init = goya_early_init,
.early_fini = goya_early_fini,
@ -5536,7 +5598,7 @@ static const struct hl_asic_funcs goya_funcs = {
.halt_engines = goya_halt_engines,
.suspend = goya_suspend,
.resume = goya_resume,
.cb_mmap = goya_cb_mmap,
.mmap = goya_mmap,
.ring_doorbell = goya_ring_doorbell,
.pqe_write = goya_pqe_write,
.asic_dma_alloc_coherent = goya_dma_alloc_coherent,
@ -5609,7 +5671,11 @@ static const struct hl_asic_funcs goya_funcs = {
.enable_events_from_fw = goya_enable_events_from_fw,
.map_pll_idx_to_fw_idx = goya_map_pll_idx_to_fw_idx,
.init_firmware_loader = goya_init_firmware_loader,
.init_cpu_scrambler_dram = goya_cpu_init_scrambler_dram
.init_cpu_scrambler_dram = goya_cpu_init_scrambler_dram,
.state_dump_init = goya_state_dump_init,
.get_sob_addr = &goya_get_sob_addr,
.set_pci_memory_regions = goya_set_pci_memory_regions,
.get_stream_master_qid_arr = goya_get_stream_master_qid_arr,
};
/*

View file

@ -98,6 +98,18 @@ struct hl_eq_fw_alive {
__u8 pad[7];
};
enum hl_pcie_addr_dec_cause {
PCIE_ADDR_DEC_HBW_ERR_RESP,
PCIE_ADDR_DEC_LBW_ERR_RESP,
PCIE_ADDR_DEC_TLP_BLOCKED_BY_RR
};
struct hl_eq_pcie_addr_dec_data {
/* enum hl_pcie_addr_dec_cause */
__u8 addr_dec_cause;
__u8 pad[7];
};
struct hl_eq_entry {
struct hl_eq_header hdr;
union {
@ -106,6 +118,7 @@ struct hl_eq_entry {
struct hl_eq_sm_sei_data sm_sei_data;
struct cpucp_pkt_sync_err pkt_sync_err;
struct hl_eq_fw_alive fw_alive;
struct hl_eq_pcie_addr_dec_data pcie_addr_dec_data;
__le64 data[7];
};
};
@ -116,7 +129,7 @@ struct hl_eq_entry {
#define EQ_CTL_READY_MASK 0x80000000
#define EQ_CTL_EVENT_TYPE_SHIFT 16
#define EQ_CTL_EVENT_TYPE_MASK 0x03FF0000
#define EQ_CTL_EVENT_TYPE_MASK 0x0FFF0000
#define EQ_CTL_INDEX_SHIFT 0
#define EQ_CTL_INDEX_MASK 0x0000FFFF
@ -300,7 +313,7 @@ enum pq_init_status {
* The packet's arguments specify the desired sensor and the field to
* set.
*
* CPUCP_PACKET_PCIE_THROUGHPUT_GET
* CPUCP_PACKET_PCIE_THROUGHPUT_GET -
* Get throughput of PCIe.
* The packet's arguments specify the transaction direction (TX/RX).
* The window measurement is 10[msec], and the return value is in KB/sec.
@ -309,19 +322,19 @@ enum pq_init_status {
* Replay count measures number of "replay" events, which is basicly
* number of retries done by PCIe.
*
* CPUCP_PACKET_TOTAL_ENERGY_GET
* CPUCP_PACKET_TOTAL_ENERGY_GET -
* Total Energy is measurement of energy from the time FW Linux
* is loaded. It is calculated by multiplying the average power
* by time (passed from armcp start). The units are in MilliJouls.
*
* CPUCP_PACKET_PLL_INFO_GET
* CPUCP_PACKET_PLL_INFO_GET -
* Fetch frequencies of PLL from the required PLL IP.
* The packet's arguments specify the device PLL type
* Pll type is the PLL from device pll_index enum.
* The result is composed of 4 outputs, each is 16-bit
* frequency in MHz.
*
* CPUCP_PACKET_POWER_GET
* CPUCP_PACKET_POWER_GET -
* Fetch the present power consumption of the device (Current * Voltage).
*
* CPUCP_PACKET_NIC_PFC_SET -
@ -345,6 +358,24 @@ enum pq_init_status {
* CPUCP_PACKET_MSI_INFO_SET -
* set the index number for each supported msi type going from
* host to device
*
* CPUCP_PACKET_NIC_XPCS91_REGS_GET -
* Fetch the un/correctable counters values from the NIC MAC.
*
* CPUCP_PACKET_NIC_STAT_REGS_GET -
* Fetch various NIC MAC counters from the NIC STAT.
*
* CPUCP_PACKET_NIC_STAT_REGS_CLR -
* Clear the various NIC MAC counters in the NIC STAT.
*
* CPUCP_PACKET_NIC_STAT_REGS_ALL_GET -
* Fetch all NIC MAC counters from the NIC STAT.
*
* CPUCP_PACKET_IS_IDLE_CHECK -
* Check if the device is IDLE in regard to the DMA/compute engines
* and QMANs. The f/w will return a bitmask where each bit represents
* a different engine or QMAN according to enum cpucp_idle_mask.
* The bit will be 1 if the engine is NOT idle.
*/
enum cpucp_packet_id {
@ -385,6 +416,11 @@ enum cpucp_packet_id {
CPUCP_PACKET_NIC_LPBK_SET, /* internal */
CPUCP_PACKET_NIC_MAC_CFG, /* internal */
CPUCP_PACKET_MSI_INFO_SET, /* internal */
CPUCP_PACKET_NIC_XPCS91_REGS_GET, /* internal */
CPUCP_PACKET_NIC_STAT_REGS_GET, /* internal */
CPUCP_PACKET_NIC_STAT_REGS_CLR, /* internal */
CPUCP_PACKET_NIC_STAT_REGS_ALL_GET, /* internal */
CPUCP_PACKET_IS_IDLE_CHECK, /* internal */
};
#define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5
@ -414,6 +450,11 @@ enum cpucp_packet_id {
#define CPUCP_PKT_VAL_LPBK_IN2_SHIFT 1
#define CPUCP_PKT_VAL_LPBK_IN2_MASK 0x000000000000001Eull
#define CPUCP_PKT_VAL_MAC_CNT_IN1_SHIFT 0
#define CPUCP_PKT_VAL_MAC_CNT_IN1_MASK 0x0000000000000001ull
#define CPUCP_PKT_VAL_MAC_CNT_IN2_SHIFT 1
#define CPUCP_PKT_VAL_MAC_CNT_IN2_MASK 0x00000000FFFFFFFEull
/* heartbeat status bits */
#define CPUCP_PKT_HB_STATUS_EQ_FAULT_SHIFT 0
#define CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK 0x00000001
@ -467,7 +508,8 @@ struct cpucp_packet {
__le32 status_mask;
};
__le32 reserved;
/* For NIC requests */
__le32 port_index;
};
struct cpucp_unmask_irq_arr_packet {
@ -476,6 +518,12 @@ struct cpucp_unmask_irq_arr_packet {
__le32 irqs[0];
};
struct cpucp_nic_status_packet {
struct cpucp_packet cpucp_pkt;
__le32 length;
__le32 data[0];
};
struct cpucp_array_data_packet {
struct cpucp_packet cpucp_pkt;
__le32 length;
@ -595,6 +643,18 @@ enum pll_index {
PLL_MAX
};
enum rl_index {
TPC_RL = 0,
MME_RL,
};
enum pvt_index {
PVT_SW,
PVT_SE,
PVT_NW,
PVT_NE
};
/* Event Queue Packets */
struct eq_generic_event {
@ -700,6 +760,15 @@ struct cpucp_mac_addr {
__u8 mac_addr[ETH_ALEN];
};
enum cpucp_serdes_type {
TYPE_1_SERDES_TYPE,
TYPE_2_SERDES_TYPE,
HLS1_SERDES_TYPE,
HLS1H_SERDES_TYPE,
UNKNOWN_SERDES_TYPE,
MAX_NUM_SERDES_TYPE = UNKNOWN_SERDES_TYPE
};
struct cpucp_nic_info {
struct cpucp_mac_addr mac_addrs[CPUCP_MAX_NICS];
__le64 link_mask[CPUCP_NIC_MASK_ARR_LEN];
@ -708,6 +777,40 @@ struct cpucp_nic_info {
__le64 link_ext_mask[CPUCP_NIC_MASK_ARR_LEN];
__u8 qsfp_eeprom[CPUCP_NIC_QSFP_EEPROM_MAX_LEN];
__le64 auto_neg_mask[CPUCP_NIC_MASK_ARR_LEN];
__le16 serdes_type; /* enum cpucp_serdes_type */
__u8 reserved[6];
};
/*
* struct cpucp_nic_status - describes the status of a NIC port.
* @port: NIC port index.
* @bad_format_cnt: e.g. CRC.
* @responder_out_of_sequence_psn_cnt: e.g NAK.
* @high_ber_reinit_cnt: link reinit due to high BER.
* @correctable_err_cnt: e.g. bit-flip.
* @uncorrectable_err_cnt: e.g. MAC errors.
* @retraining_cnt: re-training counter.
* @up: is port up.
* @pcs_link: has PCS link.
* @phy_ready: is PHY ready.
* @auto_neg: is Autoneg enabled.
* @timeout_retransmission_cnt: timeout retransmission events
* @high_ber_cnt: high ber events
*/
struct cpucp_nic_status {
__le32 port;
__le32 bad_format_cnt;
__le32 responder_out_of_sequence_psn_cnt;
__le32 high_ber_reinit;
__le32 correctable_err_cnt;
__le32 uncorrectable_err_cnt;
__le32 retraining_cnt;
__u8 up;
__u8 pcs_link;
__u8 phy_ready;
__u8 auto_neg;
__le32 timeout_retransmission_cnt;
__le32 high_ber_cnt;
};
#endif /* CPUCP_IF_H */

View file

@ -78,6 +78,26 @@
* CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL Device is unusable and customer support
* should be contacted.
*
* CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD HALT ACK from ARC0 is not received
* within specified retries after issuing
* HALT request. ARC0 appears to be in bad
* reset.
*
* CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD HALT ACK from ARC1 is not received
* within specified retries after issuing
* HALT request. ARC1 appears to be in bad
* reset.
*
* CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD RUN ACK from ARC0 is not received
* within specified timeout after issuing
* RUN request. ARC0 appears to be in bad
* reset.
*
* CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD RUN ACK from ARC1 is not received
* within specified timeout after issuing
* RUN request. ARC1 appears to be in bad
* reset.
*
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@ -98,6 +118,10 @@
#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL (1 << 11)
#define CPU_BOOT_ERR0_PLL_FAIL (1 << 12)
#define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL (1 << 13)
#define CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD (1 << 14)
#define CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD (1 << 15)
#define CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD (1 << 16)
#define CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD (1 << 17)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)
#define CPU_BOOT_ERR1_ENABLED (1 << 31)
@ -186,6 +210,10 @@
* configured and is ready for use.
* Initialized in: ppboot
*
* CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN NIC MAC channels init is done by FW and
* any access to them is done via the FW.
* Initialized in: linux
*
* CPU_BOOT_DEV_STS0_DYN_PLL_EN Dynamic PLL configuration is enabled.
* FW sends to host a bitmap of supported
* PLLs.
@ -209,6 +237,21 @@
* prevent IRQs overriding each other.
* Initialized in: linux
*
* CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN
* NIC STAT and XPCS91 access is restricted
* and is done via FW only.
* Initialized in: linux
*
* CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN
* NIC STAT get all is supported.
* Initialized in: linux
*
* CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN
* F/W checks if the device is idle by reading defined set
* of registers. It returns a bitmask of all the engines,
* where a bit is set if the engine is not idle.
* Initialized in: linux
*
* CPU_BOOT_DEV_STS0_ENABLED Device status register enabled.
* This is a main indication that the
* running FW populates the device status
@ -236,10 +279,14 @@
#define CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN (1 << 15)
#define CPU_BOOT_DEV_STS0_FW_LD_COM_EN (1 << 16)
#define CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN (1 << 17)
#define CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN (1 << 18)
#define CPU_BOOT_DEV_STS0_DYN_PLL_EN (1 << 19)
#define CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN (1 << 20)
#define CPU_BOOT_DEV_STS0_EQ_INDEX_EN (1 << 21)
#define CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN (1 << 22)
#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN (1 << 23)
#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN (1 << 24)
#define CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN (1 << 25)
#define CPU_BOOT_DEV_STS0_ENABLED (1 << 31)
#define CPU_BOOT_DEV_STS1_ENABLED (1 << 31)
@ -313,10 +360,7 @@ struct cpu_dyn_regs {
__le32 hw_state;
__le32 kmd_msg_to_cpu;
__le32 cpu_cmd_status_to_host;
union {
__le32 gic_host_irq_ctrl;
__le32 gic_host_pi_upd_irq;
};
__le32 gic_host_pi_upd_irq;
__le32 gic_tpc_qm_irq_ctrl;
__le32 gic_mme_qm_irq_ctrl;
__le32 gic_dma_qm_irq_ctrl;
@ -324,7 +368,9 @@ struct cpu_dyn_regs {
__le32 gic_dma_core_irq_ctrl;
__le32 gic_host_halt_irq;
__le32 gic_host_ints_irq;
__le32 reserved1[24]; /* reserve for future use */
__le32 gic_host_soft_rst_irq;
__le32 gic_rot_qm_irq_ctrl;
__le32 reserved1[22]; /* reserve for future use */
};
/* TODO: remove the desc magic after the code is updated to use message */
@ -462,6 +508,11 @@ struct lkd_fw_comms_msg {
* Do not wait for BMC response.
*
* COMMS_LOW_PLL_OPP Initialize PLLs for low OPP.
*
* COMMS_PREP_DESC_ELBI Same as COMMS_PREP_DESC only that the memory
* space is allocated in a ELBI access only
* address range.
*
*/
enum comms_cmd {
COMMS_NOOP = 0,
@ -474,6 +525,7 @@ enum comms_cmd {
COMMS_GOTO_WFE = 7,
COMMS_SKIP_BMC = 8,
COMMS_LOW_PLL_OPP = 9,
COMMS_PREP_DESC_ELBI = 10,
COMMS_INVLD_LAST
};

View file

@ -126,6 +126,9 @@
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_1 0x4F2004
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_2047 0x4F3FFC
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0 0x4F4000
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRH_0 0x4F4800
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_DATA_0 0x4F5000
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_ARM_0 0x4F5800
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_0 0x4F6000
#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_511 0x4F67FC

View file

@ -449,4 +449,21 @@ enum axi_id {
#define PCIE_AUX_FLR_CTRL_HW_CTRL_MASK 0x1
#define PCIE_AUX_FLR_CTRL_INT_MASK_MASK 0x2
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_VALID_SHIFT 0
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_VALID_MASK 0x1
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_PENDING_SHIFT 1
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_PENDING_MASK 0x1FE
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_SHIFT 0
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_MASK 0xFF
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_SHIFT 8
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_MASK 0xFF00
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOP_SHIFT 16
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOP_MASK 0x10000
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOD_SHIFT 17
#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOD_MASK 0xFFFE0000
#define TPC0_QM_CP_STS_0_FENCE_ID_SHIFT 20
#define TPC0_QM_CP_STS_0_FENCE_ID_MASK 0x300000
#define TPC0_QM_CP_STS_0_FENCE_IN_PROGRESS_SHIFT 22
#define TPC0_QM_CP_STS_0_FENCE_IN_PROGRESS_MASK 0x400000
#endif /* GAUDI_MASKS_H_ */

View file

@ -12,8 +12,6 @@
* PSOC scratch-pad registers
*/
#define mmHW_STATE mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
/* TODO: remove mmGIC_HOST_IRQ_CTRL_POLL_REG */
#define mmGIC_HOST_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
#define mmGIC_HOST_PI_UPD_IRQ_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
#define mmGIC_TPC_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
#define mmGIC_MME_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_3

View file

@ -276,7 +276,17 @@ enum hl_device_status {
HL_DEVICE_STATUS_OPERATIONAL,
HL_DEVICE_STATUS_IN_RESET,
HL_DEVICE_STATUS_MALFUNCTION,
HL_DEVICE_STATUS_NEEDS_RESET
HL_DEVICE_STATUS_NEEDS_RESET,
HL_DEVICE_STATUS_IN_DEVICE_CREATION,
HL_DEVICE_STATUS_LAST = HL_DEVICE_STATUS_IN_DEVICE_CREATION
};
enum hl_server_type {
HL_SERVER_TYPE_UNKNOWN = 0,
HL_SERVER_GAUDI_HLS1 = 1,
HL_SERVER_GAUDI_HLS1H = 2,
HL_SERVER_GAUDI_TYPE1 = 3,
HL_SERVER_GAUDI_TYPE2 = 4
};
/* Opcode for management ioctl
@ -337,17 +347,49 @@ enum hl_device_status {
#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
/**
* struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC
* @sram_base_address: The first SRAM physical base address that is free to be
* used by the user.
* @dram_base_address: The first DRAM virtual or physical base address that is
* free to be used by the user.
* @dram_size: The DRAM size that is available to the user.
* @sram_size: The SRAM size that is available to the user.
* @num_of_events: The number of events that can be received from the f/w. This
* is needed so the user can what is the size of the h/w events
* array he needs to pass to the kernel when he wants to fetch
* the event counters.
* @device_id: PCI device ID of the ASIC.
* @module_id: Module ID of the ASIC for mezzanine cards in servers
* (From OCP spec).
* @first_available_interrupt_id: The first available interrupt ID for the user
* to be used when it works with user interrupts.
* @server_type: Server type that the Gaudi ASIC is currently installed in.
* The value is according to enum hl_server_type
* @cpld_version: CPLD version on the board.
* @psoc_pci_pll_nr: PCI PLL NR value. Needed by the profiler in some ASICs.
* @psoc_pci_pll_nf: PCI PLL NF value. Needed by the profiler in some ASICs.
* @psoc_pci_pll_od: PCI PLL OD value. Needed by the profiler in some ASICs.
* @psoc_pci_pll_div_factor: PCI PLL DIV factor value. Needed by the profiler
* in some ASICs.
* @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant
* for Goya/Gaudi only.
* @dram_enabled: Whether the DRAM is enabled.
* @cpucp_version: The CPUCP f/w version.
* @card_name: The card name as passed by the f/w.
* @dram_page_size: The DRAM physical page size.
*/
struct hl_info_hw_ip_info {
__u64 sram_base_address;
__u64 dram_base_address;
__u64 dram_size;
__u32 sram_size;
__u32 num_of_events;
__u32 device_id; /* PCI Device ID */
__u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */
__u32 device_id;
__u32 module_id;
__u32 reserved;
__u16 first_available_interrupt_id;
__u16 reserved2;
__u16 server_type;
__u32 cpld_version;
__u32 psoc_pci_pll_nr;
__u32 psoc_pci_pll_nf;
@ -358,7 +400,7 @@ struct hl_info_hw_ip_info {
__u8 pad[2];
__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
__u64 reserved3;
__u64 reserved2;
__u64 dram_page_size;
};
@ -628,12 +670,21 @@ struct hl_cs_chunk {
__u64 cb_handle;
/* Relevant only when HL_CS_FLAGS_WAIT or
* HL_CS_FLAGS_COLLECTIVE_WAIT is set.
* HL_CS_FLAGS_COLLECTIVE_WAIT is set
* This holds address of array of u64 values that contain
* signal CS sequence numbers. The wait described by this job
* will listen on all those signals (wait event per signal)
* signal CS sequence numbers. The wait described by
* this job will listen on all those signals
* (wait event per signal)
*/
__u64 signal_seq_arr;
/*
* Relevant only when HL_CS_FLAGS_WAIT or
* HL_CS_FLAGS_COLLECTIVE_WAIT is set
* along with HL_CS_FLAGS_ENCAP_SIGNALS.
* This is the CS sequence which has the encapsulated signals.
*/
__u64 encaps_signal_seq;
};
/* Index of queue to put the CB on */
@ -651,6 +702,17 @@ struct hl_cs_chunk {
* Number of entries in signal_seq_arr
*/
__u32 num_signal_seq_arr;
/* Relevant only when HL_CS_FLAGS_WAIT or
* HL_CS_FLAGS_COLLECTIVE_WAIT is set along
* with HL_CS_FLAGS_ENCAP_SIGNALS
* This set the signals range that the user want to wait for
* out of the whole reserved signals range.
* e.g if the signals range is 20, and user don't want
* to wait for signal 8, so he set this offset to 7, then
* he call the API again with 9 and so on till 20.
*/
__u32 encaps_signal_offset;
};
/* HL_CS_CHUNK_FLAGS_* */
@ -678,6 +740,28 @@ struct hl_cs_chunk {
#define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200
#define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT 0x400
/*
* The encapsulated signals CS is merged into the existing CS ioctls.
* In order to use this feature need to follow the below procedure:
* 1. Reserve signals, set the CS type to HL_CS_FLAGS_RESERVE_SIGNALS_ONLY
* the output of this API will be the SOB offset from CFG_BASE.
* this address will be used to patch CB cmds to do the signaling for this
* SOB by incrementing it's value.
* for reverting the reservation use HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY
* CS type, note that this might fail if out-of-sync happened to the SOB
* value, in case other signaling request to the same SOB occurred between
* reserve-unreserve calls.
* 2. Use the staged CS to do the encapsulated signaling jobs.
* use HL_CS_FLAGS_STAGED_SUBMISSION and HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
* along with HL_CS_FLAGS_ENCAP_SIGNALS flag, and set encaps_signal_offset
* field. This offset allows app to wait on part of the reserved signals.
* 3. Use WAIT/COLLECTIVE WAIT CS along with HL_CS_FLAGS_ENCAP_SIGNALS flag
* to wait for the encapsulated signals.
*/
#define HL_CS_FLAGS_ENCAP_SIGNALS 0x800
#define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000
#define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000
#define HL_CS_STATUS_SUCCESS 0
#define HL_MAX_JOBS_PER_CS 512
@ -690,10 +774,35 @@ struct hl_cs_in {
/* holds address of array of hl_cs_chunk for execution phase */
__u64 chunks_execute;
/* Sequence number of a staged submission CS
* valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set
*/
__u64 seq;
union {
/*
* Sequence number of a staged submission CS
* valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set and
* HL_CS_FLAGS_STAGED_SUBMISSION_FIRST is unset.
*/
__u64 seq;
/*
* Encapsulated signals handle id
* Valid for two flows:
* 1. CS with encapsulated signals:
* when HL_CS_FLAGS_STAGED_SUBMISSION and
* HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
* and HL_CS_FLAGS_ENCAP_SIGNALS are set.
* 2. unreserve signals:
* valid when HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY is set.
*/
__u32 encaps_sig_handle_id;
/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
struct {
/* Encapsulated signals number */
__u32 encaps_signals_count;
/* Encapsulated signals queue index (stream) */
__u32 encaps_signals_q_idx;
};
};
/* Number of chunks in restore phase array. Maximum number is
* HL_MAX_JOBS_PER_CS
@ -718,14 +827,31 @@ struct hl_cs_in {
};
struct hl_cs_out {
/*
* seq holds the sequence number of the CS to pass to wait ioctl. All
* values are valid except for 0 and ULLONG_MAX
*/
__u64 seq;
/* HL_CS_STATUS_* */
union {
/*
* seq holds the sequence number of the CS to pass to wait
* ioctl. All values are valid except for 0 and ULLONG_MAX
*/
__u64 seq;
/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
struct {
/* This is the resereved signal handle id */
__u32 handle_id;
/* This is the signals count */
__u32 count;
};
};
/* HL_CS_STATUS */
__u32 status;
__u32 pad;
/*
* SOB base address offset
* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set
*/
__u32 sob_base_addr_offset;
};
union hl_cs_args {
@ -735,11 +861,18 @@ union hl_cs_args {
#define HL_WAIT_CS_FLAGS_INTERRUPT 0x2
#define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000
#define HL_WAIT_CS_FLAGS_MULTI_CS 0x4
#define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32
struct hl_wait_cs_in {
union {
struct {
/* Command submission sequence number */
/*
* In case of wait_cs holds the CS sequence number.
* In case of wait for multi CS hold a user pointer to
* an array of CS sequence numbers
*/
__u64 seq;
/* Absolute timeout to wait for command submission
* in microseconds
@ -767,12 +900,17 @@ struct hl_wait_cs_in {
/* Context ID - Currently not in use */
__u32 ctx_id;
/* HL_WAIT_CS_FLAGS_*
* If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include
* interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK, in order
* not to specify an interrupt id ,set mask to all 1s.
*/
__u32 flags;
/* Multi CS API info- valid entries in multi-CS array */
__u8 seq_arr_len;
__u8 pad[7];
};
#define HL_WAIT_CS_STATUS_COMPLETED 0
@ -789,8 +927,15 @@ struct hl_wait_cs_out {
__u32 status;
/* HL_WAIT_CS_STATUS_FLAG* */
__u32 flags;
/* valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set */
/*
* valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set
* for wait_cs: timestamp of CS completion
* for wait_multi_cs: timestamp of FIRST CS completion
*/
__s64 timestamp_nsec;
/* multi CS completion bitmap */
__u32 cs_completion_map;
__u32 pad;
};
union hl_wait_cs_args {
@ -813,6 +958,7 @@ union hl_wait_cs_args {
#define HL_MEM_CONTIGUOUS 0x1
#define HL_MEM_SHARED 0x2
#define HL_MEM_USERPTR 0x4
#define HL_MEM_FORCE_HINT 0x8
struct hl_mem_in {
union {