arch: arm64: dts: marvell: rename the sfp GPIO properties

Rename the GPIO related sfp properties to include the preffered -gpios
suffix. Also, with this change the dtb_check will no longer complain
when trying to verify the DTS against the sff,sfp.yaml binding.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Ioana Ciornei 2022-07-07 12:14:37 +03:00 committed by Jakub Kicinski
parent dfa2854cbf
commit 4ce223e5ef
10 changed files with 58 additions and 58 deletions

View file

@ -100,11 +100,11 @@ sdhci1_pwrseq: sdhci1-pwrseq {
sfp: sfp {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
/* enabled by U-Boot if SFP module is present */

View file

@ -65,20 +65,20 @@ alarm2 {
sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
sfp_eth1: sfp-eth1 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
};

View file

@ -34,20 +34,20 @@ aliases {
sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
};
/* SFP 1G */
sfp_eth2: sfp-eth2 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c0>;
los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
};
};

View file

@ -64,8 +64,8 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
sfp_cp0_eth0: sfp-cp0-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
maximum-power-milliwatt = <2000>;

View file

@ -65,10 +65,10 @@ sfp_eth0: sfp-eth0 {
/* CON15,16 - CPM lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp0_i2c>;
los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp0_pins>;
maximum-power-milliwatt = <2000>;
@ -78,10 +78,10 @@ sfp_eth1: sfp-eth1 {
/* CON17,18 - CPS lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp1_i2c>;
los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
maximum-power-milliwatt = <2000>;
@ -91,10 +91,10 @@ sfp_eth3: sfp-eth3 {
/* CON13,14 - CPS lane 5 */
compatible = "sff,sfp";
i2c-bus = <&sfp_1g_i2c>;
los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
maximum-power-milliwatt = <2000>;

View file

@ -67,20 +67,20 @@ v_vddo_h: regulator-1-8v {
sfp_cp0_eth0: sfp-cp0-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus0_i2c>;
los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
sfp_cp1_eth0: sfp-cp1-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus1_i2c>;
los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};

View file

@ -78,9 +78,9 @@ sfp: sfp {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>;
tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
status = "okay";
};

View file

@ -90,10 +90,10 @@ cp0_reg_sd_vcc: cp0_sd_vcc@0 {
cp0_sfp_eth0: sfp-eth@0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_sfpp0_i2c>;
los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
/*
* SFP cages are unconnected on early PCBs because of an the I2C
* lanes not being connected. Prevent the port for being

View file

@ -37,10 +37,10 @@ cp1_usb3_0_phy0: cp1_usb3_phy0 {
cp1_sfp_eth1: sfp-eth1 {
compatible = "sff,sfp";
i2c-bus = <&cp1_i2c0>;
los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfp_pins>;
/*

View file

@ -57,10 +57,10 @@ cp2_reg_sd_vccq: cp2_sd_vccq@0 {
cp2_sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
/*
* SFP cages are unconnected on early PCBs because of an the I2C
* lanes not being connected. Prevent the port for being