gpio: mcp23s08: Add irq functionality for i2c chips

This adds interrupt functionality for i2c chips to the driver.
They can act as a interrupt-controller and generate interrupts, if
the inputs change.
This is tested with a mcp23017 chip on an arm based platform.

v3:
- be a bit more clear that the irq functionality is also available
  on spi versions of the chips, but the linux driver does not support
  this yet

v2:
- some more word about irq-mirror property in binding doc
- use of_read_bool instead of of_find_property for
  "interrupt-contrller" and "irq-mirror"
- cache the "interrupt-controller" for remove function
- do set the irq-mirror bit only if device is marked as
  interrupt-controller
- do create the irq mapping and setup of irq_desc of all possible
  interrupts in probe path instead of in gpio_to_irq
- mark gpios as in use as interrupts in irq in irq_startup and
  unlock it in irq_shutdown
- rename virq to child_irq
- remove dev argument from mcp23s08_irq_setup function
- move gpiochip_add before mcp23s08_irq_setup in probe path

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Lars Poeschel 2014-01-16 11:44:15 +01:00 committed by Linus Walleij
parent 785acec3ee
commit 4e47f91bf7
3 changed files with 271 additions and 6 deletions

View file

@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips):
removed.
- spi-max-frequency = The maximum frequency this chip is able to handle
Example I2C:
Optional properties:
- #interrupt-cells : Should be two.
- first cell is the pin number
- second cell is used to specify flags.
- interrupt-controller: Marks the device node as a interrupt controller.
NOTE: The interrupt functionality is only supported for i2c versions of the
chips. The spi chips can also do the interrupts, but this is not supported by
the linux driver yet.
Optional device specific properties:
- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
with two interrupt outputs (these are the devices ending with 17 and
those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
IO 8-15 are bank 2. These chips have two different interrupt outputs:
One for bank 1 and another for bank 2. If irq-mirror is set, both
interrupts are generated regardless of the bank that an input change
occured on. If it is not set, the interrupt are only generated for the
bank they belong to.
On devices with only one interrupt output this property is useless.
Example I2C (with interrupt):
gpiom1: gpio@20 {
compatible = "microchip,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells=<2>;
microchip,irq-mirror;
};
Example SPI:

View file

@ -722,6 +722,7 @@ config GPIO_MCP23S08
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
I/O expanders.
This provides a GPIO interface supporting inputs and outputs.
The I2C versions of the chips can be used as interrupt-controller.
config GPIO_MC33880
tristate "Freescale MC33880 high-side/low-side switch"

View file

@ -1,5 +1,13 @@
/*
* MCP23S08 SPI/GPIO gpio expander driver
* MCP23S08 SPI/I2C GPIO gpio expander driver
*
* The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
* supported.
* For the I2C versions of the chips (mcp23008 and mcp23017) generation of
* interrupts is also supported.
* The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
* also capable of generating interrupts, but the linux driver does not
* support that yet.
*/
#include <linux/kernel.h>
@ -12,7 +20,8 @@
#include <linux/spi/mcp23s08.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <linux/of.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
/**
@ -34,6 +43,7 @@
#define MCP_DEFVAL 0x03
#define MCP_INTCON 0x04
#define MCP_IOCON 0x05
# define IOCON_MIRROR (1 << 6)
# define IOCON_SEQOP (1 << 5)
# define IOCON_HAEN (1 << 3)
# define IOCON_ODR (1 << 2)
@ -57,8 +67,14 @@ struct mcp23s08 {
u8 addr;
u16 cache[11];
u16 irq_rise;
u16 irq_fall;
int irq;
bool irq_controller;
/* lock protects the cached values */
struct mutex lock;
struct mutex irq_lock;
struct irq_domain *irq_domain;
struct gpio_chip chip;
@ -77,6 +93,11 @@ struct mcp23s08_driver_data {
struct mcp23s08 chip[];
};
/* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
/*----------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_I2C)
@ -315,6 +336,195 @@ mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
return status;
}
/*----------------------------------------------------------------------*/
static irqreturn_t mcp23s08_irq(int irq, void *data)
{
struct mcp23s08 *mcp = data;
int intcap, intf, i;
unsigned int child_irq;
mutex_lock(&mcp->lock);
intf = mcp->ops->read(mcp, MCP_INTF);
if (intf < 0) {
mutex_unlock(&mcp->lock);
return IRQ_HANDLED;
}
mcp->cache[MCP_INTF] = intf;
intcap = mcp->ops->read(mcp, MCP_INTCAP);
if (intcap < 0) {
mutex_unlock(&mcp->lock);
return IRQ_HANDLED;
}
mcp->cache[MCP_INTCAP] = intcap;
mutex_unlock(&mcp->lock);
for (i = 0; i < mcp->chip.ngpio; i++) {
if ((BIT(i) & mcp->cache[MCP_INTF]) &&
((BIT(i) & intcap & mcp->irq_rise) ||
(mcp->irq_fall & ~intcap & BIT(i)))) {
child_irq = irq_find_mapping(mcp->irq_domain, i);
handle_nested_irq(child_irq);
}
}
return IRQ_HANDLED;
}
static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
return irq_find_mapping(mcp->irq_domain, offset);
}
static void mcp23s08_irq_mask(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
unsigned int pos = data->hwirq;
mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
}
static void mcp23s08_irq_unmask(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
unsigned int pos = data->hwirq;
mcp->cache[MCP_GPINTEN] |= BIT(pos);
}
static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
unsigned int pos = data->hwirq;
int status = 0;
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
mcp->cache[MCP_INTCON] &= ~BIT(pos);
mcp->irq_rise |= BIT(pos);
mcp->irq_fall |= BIT(pos);
} else if (type & IRQ_TYPE_EDGE_RISING) {
mcp->cache[MCP_INTCON] &= ~BIT(pos);
mcp->irq_rise |= BIT(pos);
mcp->irq_fall &= ~BIT(pos);
} else if (type & IRQ_TYPE_EDGE_FALLING) {
mcp->cache[MCP_INTCON] &= ~BIT(pos);
mcp->irq_rise &= ~BIT(pos);
mcp->irq_fall |= BIT(pos);
} else
return -EINVAL;
return status;
}
static void mcp23s08_irq_bus_lock(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
mutex_lock(&mcp->irq_lock);
}
static void mcp23s08_irq_bus_unlock(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
mutex_lock(&mcp->lock);
mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
mutex_unlock(&mcp->lock);
mutex_unlock(&mcp->irq_lock);
}
static unsigned int mcp23s08_irq_startup(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
if (gpio_lock_as_irq(&mcp->chip, data->hwirq))
dev_err(mcp->chip.dev,
"unable to lock HW IRQ %lu for IRQ usage\n",
data->hwirq);
mcp23s08_irq_unmask(data);
return 0;
}
static void mcp23s08_irq_shutdown(struct irq_data *data)
{
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
mcp23s08_irq_mask(data);
gpio_unlock_as_irq(&mcp->chip, data->hwirq);
}
static struct irq_chip mcp23s08_irq_chip = {
.name = "gpio-mcp23xxx",
.irq_mask = mcp23s08_irq_mask,
.irq_unmask = mcp23s08_irq_unmask,
.irq_set_type = mcp23s08_irq_set_type,
.irq_bus_lock = mcp23s08_irq_bus_lock,
.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
.irq_startup = mcp23s08_irq_startup,
.irq_shutdown = mcp23s08_irq_shutdown,
};
static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
{
struct gpio_chip *chip = &mcp->chip;
int err, irq, j;
mutex_init(&mcp->irq_lock);
mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
&irq_domain_simple_ops, mcp);
if (!mcp->irq_domain)
return -ENODEV;
err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
dev_name(chip->dev), mcp);
if (err != 0) {
dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
mcp->irq, err);
return err;
}
chip->to_irq = mcp23s08_gpio_to_irq;
for (j = 0; j < mcp->chip.ngpio; j++) {
irq = irq_create_mapping(mcp->irq_domain, j);
irq_set_lockdep_class(irq, &gpio_lock_class);
irq_set_chip_data(irq, mcp);
irq_set_chip(irq, &mcp23s08_irq_chip);
irq_set_nested_thread(irq, true);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
irq_set_noprobe(irq);
#endif
}
return 0;
}
static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
{
unsigned int irq, i;
free_irq(mcp->irq, mcp);
for (i = 0; i < mcp->chip.ngpio; i++) {
irq = irq_find_mapping(mcp->irq_domain, i);
if (irq > 0)
irq_dispose_mapping(irq);
}
irq_domain_remove(mcp->irq_domain);
}
/*----------------------------------------------------------------------*/
#ifdef CONFIG_DEBUG_FS
@ -370,10 +580,11 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
/*----------------------------------------------------------------------*/
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
void *data, unsigned addr,
unsigned type, unsigned base, unsigned pullups)
void *data, unsigned addr, unsigned type,
unsigned base, unsigned pullups)
{
int status;
bool mirror = false;
mutex_init(&mcp->lock);
@ -432,13 +643,25 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
* and MCP_IOCON.HAEN = 1, so we work with all chips.
*/
status = mcp->ops->read(mcp, MCP_IOCON);
if (status < 0)
goto fail;
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
mcp->irq_controller = of_property_read_bool(mcp->chip.of_node,
"interrupt-controller");
if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017))
mirror = of_property_read_bool(mcp->chip.of_node,
"microchip,irq-mirror");
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) {
/* mcp23s17 has IOCON twice, make sure they are in sync */
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
status |= IOCON_HAEN | (IOCON_HAEN << 8);
status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
if (mirror)
status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
status = mcp->ops->write(mcp, MCP_IOCON, status);
if (status < 0)
goto fail;
@ -470,6 +693,16 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
}
status = gpiochip_add(&mcp->chip);
if (status < 0)
goto fail;
if (mcp->irq && mcp->irq_controller) {
status = mcp23s08_irq_setup(mcp);
if (status) {
mcp23s08_irq_teardown(mcp);
goto fail;
}
}
fail:
if (status < 0)
dev_dbg(dev, "can't setup chip %d, --> %d\n",
@ -546,6 +779,7 @@ static int mcp230xx_probe(struct i2c_client *client,
if (match || !pdata) {
base = -1;
pullups = 0;
client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
} else {
if (!gpio_is_valid(pdata->base)) {
dev_dbg(&client->dev, "invalid platform data\n");
@ -559,6 +793,7 @@ static int mcp230xx_probe(struct i2c_client *client,
if (!mcp)
return -ENOMEM;
mcp->irq = client->irq;
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
id->driver_data, base, pullups);
if (status)
@ -579,6 +814,9 @@ static int mcp230xx_remove(struct i2c_client *client)
struct mcp23s08 *mcp = i2c_get_clientdata(client);
int status;
if (client->irq && mcp->irq_controller)
mcp23s08_irq_teardown(mcp);
status = gpiochip_remove(&mcp->chip);
if (status == 0)
kfree(mcp);