[ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.

Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Ben Dooks 2008-12-12 00:24:18 +00:00
parent 598ee00207
commit 4e59c25dcb
9 changed files with 15 additions and 15 deletions

View File

@ -40,13 +40,13 @@ Resuming
Machine Support
---------------
The machine specific functions must call the s3c2410_pm_init() function
The machine specific functions must call the s3c_pm_init() function
to say that its bootloader is capable of resuming. This can be as
simple as adding the following to the machine's definition:
INITMACHINE(s3c2410_pm_init)
INITMACHINE(s3c_pm_init)
A board can do its own setup before calling s3c2410_pm_init, if it
A board can do its own setup before calling s3c_pm_init, if it
needs to setup anything else for power management support.
There is currently no support for over-riding the default method of
@ -74,7 +74,7 @@ statuc void __init machine_init(void)
enable_irq_wake(IRQ_EINT0);
s3c2410_pm_init();
s3c_pm_init();
}

View File

@ -203,7 +203,7 @@ static void __init h1940_map_io(void)
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c2410_pm_init();
s3c_pm_init();
}
static void __init h1940_init_irq(void)

View File

@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void)
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c2410_pm_init();
s3c_pm_init();
}
MACHINE_START(QT2410, "QT2410")

View File

@ -630,7 +630,7 @@ static void __init jive_machine_init(void)
/* initialise the power management now we've setup everything. */
s3c2410_pm_init();
s3c_pm_init();
s3c_device_nand.dev.platform_data = &jive_nand_info;

View File

@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void)
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c2410_pm_init();
s3c_pm_init();
s3c24xx_fb_set_platdata(&rx3715_fb_info);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));

View File

@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
/* s3c2410_pm_init
/* s3c_pm_init
*
* called from board at initialisation time to setup the power
* management
@ -17,11 +17,11 @@
#ifdef CONFIG_PM
extern __init int s3c2410_pm_init(void);
extern __init int s3c_pm_init(void);
#else
static inline int s3c2410_pm_init(void)
static inline int s3c_pm_init(void)
{
return 0;
}

View File

@ -316,14 +316,14 @@ static struct platform_suspend_ops s3c_pm_ops = {
.valid = suspend_valid_only_mem,
};
/* s3c2410_pm_init
/* s3c_pm_init
*
* Attach the power management functions. This should be called
* from the board specific initialisation if the board supports
* it.
*/
int __init s3c2410_pm_init(void)
int __init s3c_pm_init(void)
{
printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");

View File

@ -201,5 +201,5 @@ void __init smdk_machine_init(void)
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
s3c2410_pm_init();
s3c_pm_init();
}

View File

@ -61,7 +61,7 @@ static __init int pm_simtec_init(void)
__raw_writel(gstatus4, S3C2410_GSTATUS4);
return s3c2410_pm_init();
return s3c_pm_init();
}
arch_initcall(pm_simtec_init);